Premier Workplace Solutions Cable Management Brochure

1

PREMIER WORKPLACE SOLUTIONS

T. 09 402 6750 F. 09 402 6751

Cable ManagementTrip Prevention

Convex MirrorsPedestrian and Traffic Safety

Dome MirrorsSecurity and Safety

General Safety

www.pwsonline.co.nz

CableManagement

Pedestrian and Traffic Mirrors

Security and Safety Mirrors

General Safety

CABLE MANAGEMENT SYSTEMSwww.cablecovers.co.nz

These cable protectors are ideal for office and pedestrian applications, both permanent and temporary.

Simply lay your cables down and drop the cable protector over the top of the cables. This system features interlocking nodules which allow you to construct the system to your required length.

Their ease of use makes them ideal for temporary applications where you are likely to be moving them frequently, so ideal for board room and event applications.

Available in two anti-slip styles:

• Ribbed anti-slip profile in black

• Tread plate surface in either black or yellow.

Lengths vary according to style. A minimum order of two lengths apply.

CP2

CP2HAZ

Protect important cables and leads, and help eliminate the risk of trips and falls from loose cabling with our range of cable protectors.

Made from extruded durable black rubber these cable protectors are flexible and lightweight making them easy to install or remove.

There are different sizes which make them ideal for applications from offices and boardrooms through to warehouses and factories. The smaller cable protectors will comfortably protect network data cables, phone and standard power cables. The larger cable protectors will fit 3-phase power cables, compressed airlines and hoses.

Cables are simply inserted via slits on the underside of the protector. For added visibility we can add an anti-slip highlighting tape.

Cable protectors are cut to length to suit your application. A minimum order of 2 metres applies.

SAFCORD® TRIP PREVENTION SYSTEMSafcord® nylon cable covers provide a solution to securing electrical and data cables to looped carpet. This innovative hook and loop method allows you to fasten the cables in place without the use of adhesives that leave a messy residue on your carpet.

The industrial grade nylon fabric is tough and stands up to almost anything. It is also washable and re-useable. The durable filament hooks hold fast, even staying in place during vacuuming. Safcord can be used on stairs or curved surfaces with ease. It works well on loop carpet, commercial grade rugs, and Berber carpet. Safcord will not work with cut pile carpet.

The Safcord comes in 1.8 metre or 9 metre lengths in three colours (Grey, Blue or Yellow). It’s design allows you to cut it to any length without unraveling.

DROPOVER CABLE PROTECTORSECONOMY CABLE PROTECTORS

CP4HAZ

CP5

SEE OUR SELECTION GUIDE AND TECHNICAL SPECIFICATIONS OVER THE PAGE

CP7

1

SELECTION GUIDE:

Product Specifications: Style No.

Power cables Applications/Cable type

CP21-2

Power Cables

• Ideal for offices, boardrooms and computer rooms• Comfortably protects a network data cable, phone cable and

standard power cable (one of each)• Available cut to length, minimum order 2 metres.

CP33-4

Power Cables

• Ideal for offices, boardrooms and computer rooms• Comfortably protects a network data cable, phone cable and

standard power cable (multiples of each)• Available cut to length, minimum order 2 metres.

CP4

4-5

Power Cables

and/or

Hoses

• Ideal for offices, warehouses and factories• Comfortably protects multiple network data cables, phone

and power cables, 3 phase cables, compressed airlines and water hoses

• Available cut to length, minimum order 2 metres.

CP5

4-8

Power Cablesand/orHoses

• Ideal for warehouse, factory and external applications• Trafficable (light traffic only)• Comfortably fits two 3-phase power cables or two

compressed airlines• Available cut to length, minimum order 2 metres.

CP6

4-5

Power Cablesand/orHoses

• Suitable for warehouse, factory and external applications• Ideal for protection of hoses• Trafficable (light traffic only) with minimum compression• Available cut to length, minimum order 2 metres.

CP7 4-5

Power Cables

• Dropover cable protector with ribbed profile• Ideal for office and pedestrian applications• Simply drop over the top of cables• Great for temporary and permanent applications• Available in 1 metre inter-locking lengths, minimum order 2

lengths.

CP124-5

Power Cables

• Dropover cable protector in black or yellow• Anti-slip checker tread plate surface• Simply drop over the top of cables• Ideal for office and pedestrian applications• Available in 1 metre inter-locking lengths, minimum

order 2 lengths.

CP88-10

Power Cables

• Dropover cable protector ribbed profile• Ideal for office and pedestrian applications• Simply drop over the top of cables• Great for temporary and permanent applications• Available in 1.2 metre inter-locking lengths, minimum order

2 lengths.

CP138-10

Power Cables

• Dropover cable protector in black or yellow• Anti-slip checker tread plate surface• Office and pedestrian applications• Simply dropover top of cables• Available in 1 metre inter-locking lengths, minimum

order 2 lengths.

SAF/1.8

SAF/9.0

3

Power Cables

• Available in Blue, Grey or Yellow • Precut in a 1.8 or 9 metre lengths• Secures cables to looped carpet• Industrial grade nylon fabric• Can be cut to any length without unravelling.


2

TRAFFICABLE CABLE PROTECTORS

These lead hooks are ideal for keeping cables, leads and hoses off the ground, assisting in Occupational Health and Safety compliance. They are manufactured from a non-conductive, highly visible and durable plastic material.

The two larger hooks will accommodate cables and hoses up to 20mm in diameter, whilst the smaller ‘clip style’ hooks are ideal for standard power cables.

An economical cable cover for permanent and semi-permanent applications, this 300mm wide speed hump style cable cover features two cable channels. Each channel is 31mm wide by 24mm high. The 1200mm long modules feature 3 recessed fixing points and built-in reflectors for added visibility.

This cable protector is suitable for light to medium vehicle applications.

ECONOMY VEHICULAR CABLE COVER

LEAD HOOKS

Part No. StyleCPT1200 Cable protector/speed hump, 1200mm long

Part No. StyleCPLHK Plastic lead hooks, available individually or in packs, see website for

details.

Part No. StyleCP10 105mm Wide, 30mm High, 20mm Diameter channel, 10 metre roll

CP11 170mm Wide, 53mm High, 38mm Diameter channel, 4 metre roll

This medium size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 10 metre rolls, they can easily be cut to length.

This large size extruded rubber cable protector is designed to aid vehicles in safely crossing cables. Simply roll out the cable protector and insert the required cables through the slit in the top. The cables are then enclosed within the protector reducing the risk of damage to the cables. Supplied in 4 metre rolls, they can easily be cut to length.

SpecificationsLength 10 metre roll

Height 30mm

Width 105mm

Weight 15.5kg

No. of channels 1

Channel height 20mm

Channel width 20mm

SpecificationsLength 4 metre roll

Height 53mm

Width 170mm

Weight 17.3kg

No. of channels 1

Channel height 38mm

Channel width 38mm

CP10 CABLE PROTECTOR

CP11 CABLE PROTECTOR

CP10

CP11


3

3 CHANNEL CABLE & HOSE PROTECTOR

Occasionally you just can’t avoid running cables or hoses across the floor. To help with these applications we offer a 3 channel cable and hose protector designed to protect valuable cables and hoses from vehicle damage and provide safe passage for pedestrians and vehicles across your cables and hoses.

It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. This system features left and right 45 degree turning sections and end caps.

• Large channels to suit a variety of cable and hose sizes• Suitable for indoor or outdoor use• Checker plate pattern for increased traction• Easy to interlock with highly visible colour• Non-conductive construction• Hinged lid for easy access to cables• Fixing holes for more permanent applications.

SpecificationsLength 900mm

Height 75mm

Width 600mm

Weight 20kg

No. of channels 3

Channel height 55mm

Channel width 60mm

Part No. StyleCP3CH Cablesafe cable protector body

CP3CH/LT 45° left turn module

CP3CH/RT 45° right turn module

CP3CH/EC End caps (pair)

2 CHANNEL CABLE & HOSE PROTECTOR

This 2 channel cable protector is designed to protect cables and hoses from vehicle damage and provide safe passage for vehicles across potentially hazardous cables.

These are ideal for temporary and permanent applications. Our cable protectors are non-conductive, plastic and polyurethane construction making them suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications.

The modular, interlocking design allows you to construct a cable protection system to suit your needs. Each module features four fixing points to help secure the cable protector in more permanent applications.

• Suitable for indoor or outdoor use • Checker plate pattern for increased traction • Easy to interlock with highly visible colour • Non-conductive construction • Hinged plastic lid for easy access to cables • Fixing holes for more permanent applications.


Height 45mm

Width 250mm

Weight 7.5kg

No. of channels 2

Channel height 30mm

Channel width 30mm

Part No. StyleCP2CH Two Channel cable and hose protector

CP2CH/LT 45° left turn module

CP2CH/RT 45° right turn module


4

5 CHANNEL ECONOMY PROTECTOR

These moulded rubber cable covers are an excellent economical counterpart to their polyurethane cousins. They are suitable for pedestrian traffic and occasional light vehicles (we would not recommend them for heavy vehicles or frequent traffic applications). The system features a ‘snap-lock’ hinged lid to keep those cables and hoses secure, a unique interlocking mechanism, and end pieces for a smooth transition.

• Highly visible colour• Non-conductive construction• Hinged lid for easy access to

cables• Fixing holes for more permanent

applications.


Height 50mm

Width 500mm

Weight 17.5kg

No. of channels 5

Channel height 31mm

Channel width 35mm

5 CHANNEL CABLE PROTECTOR

Part No. StyleCPPL5CH 5 Channel cable protector - standard plastic lid

CPPL5CH/LT 45 Degree Left Turn

CPPL5CH/RT 45 Degree Right Turn

CPPL5CH/EC End caps (pair)

This 5 channel cable and hose protector is ideal for when you need to run a number of cables and hoses across the floor. This cable protector will protect your valuable cables from both pedestrian and vehicle traffic. It also provides safe passage for pedestrians and vehicles across potentially hazardous cables.

It’s non-conductive, rubber and polyurethane construction makes it suitable for high volume pedestrian and low to medium volume, light to medium weight vehicle applications. Its modular, interlocking design allows you to construct cable protection systems to suit your needs. Each module features four fixing points to help secure the cable cover in more permanent applications. The system features left and right 45 degree turning sections and end caps.

• Checker plate pattern for increased traction - easy to interlock

• Highly visible colour• Non-conductive construction• Hinged lid for easy access to

cables• Fixing holes for more permanent

applications.


Height 75mm

Width 590mm

Weight 16kg

No. of channels 5

Channel height 50mm

Channel width 35mm

L R


Part No. StyleCP5CH 5 channel cable protector with pair connectors - rubber lid

CP5CH/EC End caps (pair) with connectors, 30cm long each

CP5CH/TH Extra connectors (pair)

5

Invoice to Deliver to

Please supply

Code Number Description Colour Quantity Unit Value Extended Value

Freight Charge

Total Value

Company:

Address:

Suburb:

City/Town: Post Code:

Name:

Position:

Phone: Fax:

Email:

Purchase Order No:

Signature:

Date:

q Please bill our existing account (Net 20 days)

q Electronic funds transfer (EFT) - please advise details

q Cheque (cleared funds) made payable to Premier Workplace Solutions posted to PO Box 51, Paihia 0247, Bay of Islands

q Please charge my credit card: q Visa q Mastercard

Card No.___________________________________________________________ Expiry Date:__________________________

Name on Card:__________________________________________________________________________________________

Card Holder’s Signature:___________________________________________________________________________________

Easy payment

FAX ORDER FORMFax: 09 402 6751

10

q Please deliver by PWS courier - charges applyq Please use our courier:

Account No:Purchase order number will be displayed on all delivery dockets where quoted.

Company:

Address:

Suburb:

City/Town: Post Code:

Name:

Position:

Phone: Fax:

For a full catalogue and price list contact:E. [email protected]. 09 402 6750F. 09 402 6751PO Box 51, Paihia 0247

RESELLERENQUIRIESWELCOME

CABLE MANAGEMENT

www.cablecovers.co.nz

CONVEX MIRRORS/DOME MIRRORS

www.convexmirrors.co.nz

FULL PRODUCT RANGE

www.pwsonline.co.nz

© Premier Workplace Solutions Limited. The contents of this catalogue are protected by copyright. No part of this catalogue may be reproduced without prior permission from the owner. We reserve the right to alter specifications to products without prior notice.

Documents

Premier Workplace Solutions Cable Management Brochure