PRIMERGY RX900 S1 - Fujitsu · Fujitsu Technology Solutions PRIMERGY Server 2 of 17. ... - Windows Server 2008 R2 Datacenter # Open Enterprise Server ***) - Windows Server 2008 R2

PRIMERGY RX900 S1System configurator and order-information guide

Contents

Instructions

Configuration diagram

Configurator

0 0 System software

1 I Basic unit

2 II Processor

3 III Memory

4 IV USB devices / optical devices

5 V Hard disk drives

6 VI Tape Devices

7 VII Internal SAS RAID Controller

8 VIII External SCSI / SAS controller

9 IX Fibre Channel controller

10 X Communication / Network

11 XI iRMC S2 advanced pack / TPM

12 XII Optional PSU / Power Cord

Change report

PRIMERGY Server

January 2012

System configurator and order-information guidePRIMERGY RX900 S1 Status 2011-12-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system viaPC-/System-Architect

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section III Memory, example

There are X memory slots which can be equipped with XXX MB

It is permissible to make up to X passes through the memory upgrade options

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

Further information in the internet see:

http://ts.fujitsu.com/products/standard_servers/index.html (internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx(extranet)

Prices and availability see price list and PC-/System-Architect.Subject to change and errors excepted.

Fujitsu Technology Solutions PRIMERGY Server 2 of 17

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

System configurator and order-information guidePRIMERGY RX900 S1 Status 2011-12-30

Configuration diagram PRIMERGY RX900 S1

Basic Unit ( I )Processor ( II )

Memory ( III )

Ether 2 Ether 4 Ether 6

Service Ether 1 Ether 3 Ether 5

1. PSU 2. PSU 4. PSU ( 2+2 )

Hot Plug Redundant Power Supply (XII)

Option

Slo

t #8 P

CIe

2.0

x8,

inte

rnal R

AID

Vid

eo

Slot #1 PCIe 2.0 x8, short length

Included in the base configuration

Slo

t #13 P

CIe

2.0

x8,

short

lengh

Slo

t #12 P

CIe

2.0

x8,

short

lengh P

HP

CO

M


RE

AR

VIE

W

US

B #

1

US

B #

2

3. PSU ( 2+1 )

US

B #

4

Slo

t #11 P

CIe

2.0

x8,

short

lengh P

HP

Slo

t #10 P

CIe

2.0

x8,

short

lengh P

HP

Slo

t #9 P

CIe

2.0

x8,

short

lengh P

HP

Slo

t #17 P

CIe

2.0

x4,

short

lengh

Slo

t #16 P

CIe

2.0

x8,

short

lengh

Slo

t #15 P

CIe

2.0

x8,

short

lengh

Slo

t #14 P

CIe

2.0

x8,

short

lengh



US

B #

3

10 Gb

Ether 8

10 Gb

Ether 7

Local View LCD Display




DVD / Blue Ray

Hard disk drives ( VI )Hard disk drives ( VI )

Operating

Panel

Video

Slo

t #8

PC

Ie 2

.0 x

8,

inte

rnal R

aid

slo

t

Slo

t #15

PC

Ie 2

.0 x

8,

short

lenght

Slo

t #14

PC

Ie 2

.0 x

8,

short

lenght

Slo

t #13

PC

Ie 2

.0 x

8,

short

lenght

Slo

t #12

PC

Ie 2

.0 x

8,

short

lenght

PH

P

Slo

t #11

PC

Ie 2

.0 x

8,

short

lenght

PH

P

Slo

t #17

PC

Ie 2

.0 x

4,

short

lenght

Slo

t #16

PC

Ie 2

.0 x

8,

short

lenght

2.5" SAS #4 2.5" SAS #62.5" SAS #0 2.5" SAS #2

2.5" SAS #1 2.5" SAS #3

Slo

t #10

PC

Ie 2

.0 x

8,

short

lenght

PH

P

Slo

t #9

PC

Ie 2

.0 x

8,

short

lenght

PH

P

Extension slots:

external SCSI / RAID controller ( VIII ), Fiber Channel ( IX ), Communication/Network ( X )

FR

ON

T V

IEW

USB #7

USB #6

USB #5

2.5" SAS #5 2.5" SAS #7

CP

UM

EM

R #

4

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

3

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

2

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

1

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

8

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

7

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

6

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts

CP

UM

EM

R #

5

with

1x C

PU

so

cke

t a

nd

16

x D

IMM

slo

ts


PRIMERGY-Software Configurators and Release ListsStart "PRIMERGY RX900 S1" PRIMERGY RX900 S1 Status 2011-12-30

Section O SW Configurator 64 bit (EM64T / IA64)

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM- SW is bound to HW and

For all SW products please refer to the corresponding is not allowed to be ordered

software configurator accessible via the Extranet under separately.

"Configuration & Tools, -All configurations, -Software, Exceptions: VMware SW,

URL see below. Citrix XenServer

VMware-Software

- VirtualCenter Management Server for any server released for Windows Server 2003

- Virtual Infrastructure 3 for PRIMERGY > except all mono PRIMERGY systems

- ESX2 for PRIMERGY RX/TX300S2, RX/TX600S3, BX620S2, BX630 Dual/Quad, BX630 8-way

Microsoft Hyper-V Server and System Center

- Microsoft System Center Virtual Machine Manager Workgroup Edition for any server released for Windows Server 2008 R2

- Microsoft System Center Essentials Management Suite for any server released for Windows Server 2008 SP2

- Microsoft Hyper-V Server 2008 R2

Microsoft - Windows Server 2008 R2 Server Licenses Linux - Software *) **)

- Windows Server 2008 R2 Datacenter # Open Enterprise Server ***)

- Windows Server 2008 R2 Enterprise only - SuSE Linux ES (OEM): LO

- EM64T - Red Hat EL (OEM): LO

Microsoft - Windows Server 2008 Server Licenses

- Windows Server 2008 Datacenter PRIMECLUSTER *)

- Windows Server 2008 Enterprise - Clustering

- - Load Balancing

Microsoft - Windows Server 2003

- Windows Server 2003 R2 if end of certification date is still ok

-

-

-

only MultiPath, Duplex Data

EM64T Manager (DDM)

Windows, Linux (W-DDM) Details eg. version numbers are published

on the page referred to

*) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under

Manageability Software: V**) https://partners.ts.fujitsu.com/com/products/software/cluster%20technology/primecluster/Pages/default.aspx

- iRMC advanced Pack

only - RemoteView Software

EM64T - RemoteView Service Board **) Pay attention to release and order information in PRINCE -> Operating System

- RemoteView Diagnosis https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

- RemoteDeploy

***) Supply over distribution or procurement from FSC VP BC Software

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users: http://sp.ts.fujitsu.com/dmsp/docs/osrel.xlsx

for partners: https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

Continue with PRIMERGY

HW configurator


https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx

System configurator and order-information guideStart PRIMERGY RX900 S1 PRIMERGY RX900 S1 Status 2011-12-30

Section I Basic unit

PRIMERGY RX900 S1 Baseboard with

- Intel 7500 chipset with serial QPI links (Quick Path Interconnect)

Rack unit 8U with - 16 PCI-Express Slots

- 2 hot-plug power supplys (additional PSU as option) 2x PCIe 2.0 x4 (half length)

- 4 CPUMemory Boards (CPUMEMR) (up to 4 additional boards optional) 14x PCIe 2.0 x8 (half length)

- LCD-Display for LocalView (Service Display) - 8x socket for CPUMEMR

- 8 bays for 2.5" SAS/SATA HDD`s - SATA controller on-board (for ODD)

- Power cord for rackmounting (ICE 320 C14->C19 plug) - iRMC S2 (integrated Remote Management Controller)

- no Rack- mounting kit included with graphics controller and 10/100Mbit Service LAN-port

- 6x 1GBit LAN Ports on-board (WOL-capable)

Base Unit S26361-K1361-V800 - 2x 10GBit LAN Ports on-board

- SAS RAID controller as option

- ServerView Suite Software package

incl. ServerStart, ServerBooks, Management Software and Updates

Interfaces:

Front side

- 3x USB 2.0

- 1x VGA (15 pin)

Rear Side

S26361-F2735-E111 S26361-F2735-E109 - 2x USB 2.0

No Rackmount-Kit option RMK RX900 - 1x VGA (15 pin)

Only for loose deliveries telescopic rails - 1x RS-232-C (serial, 9 pin)

No mounting in Racks possible - 6x onboardLAN RJ45, 2x onboardLAN SFP+, 1x ServiceLAN RJ45

max. 1x per system consisting of Internal

- 1 pair of telescopic rails - 1x internal USB Interfaces for backup device

with screws and washers - 1x internal port for UFM (uSSD) Module (Embedded vSphere ESXi 4.0)

no PS/2 connection for KB / Mouse (USB must be used instead)

1x per system

S26361-F2735-L109

RMK RX900 for Server Drop-in

S26361-F4530-E13 S26361-F4530-E10 telescopic rails

Mounting in Mounting in for loose delivery

asymmetrical racks (3U bracket) symmetrical racks

max. 1x per system max. 1x per system S26361-F2735-L7

Lateral cable management for RX900

S26361-F2735-E17 S26361-F2201-E20 mounted in asymmetrical racks

Cable management for RX900 2U cable arm behind systems for loose delivery

- for asym. PRIMECENTER racks - for symmetrical PCR M1

- not for 3rd party - or for 3rd party racks S26361-F2201-L20

max. 4x per system max. 3x per system 2U cable arm mounted behind systems

in symmetrical PCR M1 or 3rd party racks

for loose delivery

S26361-F2735-L31

PRIMECENTER S2 or M1 Racks Support Bracket 3 HU for mounting

in asymmetrical racks

1x per system

SNP:SY-F1647E301-P

Installation ex works for one "Rack-mounting ex factory"

server or subsystem. This service is to be ordered once

Hereby the rack will be delivered per installable server/storage

completely pre-mounted and subsystem, in order to get the

all wired connections are tested. server/storage subsystem

With racks 12U, 24U, 38U: mounted into the PRIMERGY racks.

Systems and components In case of the 46 U PRIMERGY Rack,

will be delivered installed in the rack this service has to be ordered,

With racks 46U: to get the mounting kits and the

Systems and components cables installed.

will be delivered separately

To be ordered only together with

a PRIMERGY PRIMECENTER rack

e.g.:

S26361-K826-V10x

refer configurator PC-Rack

max. 1x per System

A


System configurator and order-information guideA PRIMERGY RX900 S1 Status 2011-12-30

Section II Processor

4 CPU Memory Riser (CPUMEMR) and 4 CPU's must be configured as minimum, as mamimum 8 are possible.

Later upgrading to a 6 or 8 processor system is also possible,

but requires possibly adding of PSU modules.

Extension CPUs must be identical to the already installed CPU´s.

4 CPU Memory Riser (CPUMEMR) are part of the

Base Unit S26361-K1361-V800

S26361-F4470-E100

CPUMEMR - CPU Memory Riser Board

A minimum of 4 CPUMEMR must be configured

- 1x CPU Socket for Intel Xeon processor 7500 series

with 1066 or 1333MHz Frontside Bus incl. passive heat sink

- 16 Memory DIMM Slots for DDR3 DIMM

- 4x SMI on each CPUMEMR

Max 8 CPUMEMR per System

Following CPU´s can be configured max. 8x per system

A minimum od 4 CPU´s must be configured

Xeon E7540 6C/2,00GHz/18M/6,4GT/s (105W) S26361-F4471-E540 extended lead time

4x Xeon X7542 6C/2,66GHz/18M/5,8GT/s (130W) S26361-F4471-E542

Xeon X7550 8C/2,00GHz/18M/6,4GT/s (130W) S26361-F4471-E550

Xeon X7560 8C/2,26GHz/24M/6,4GT/s (130W) S26361-F4471-E560 extended lead time

B


System configurator and order-information guideB PRIMERGY RX900 S1 Status 2011-12-30

Section III Memory

C

Memory configuration modes Interleaving Mode In RX900 S1 Memory Interleaving Mode is default and set by BIOS. Hemisphere Mode RX900 S1 supports Hemisphere Mode from 5 - 8 CPU configuration default and set by BIOS up to 4 CPU configuration support non Hemisphere Mode only. Spare Mode Spare mode is not supported in RX900 S1 Mirroring mode To use Mirroring Mode you have to order the Mirroring Mode option - S26361-F4472-E3 In mirroring mode, all data are copied within the main memory. Therefore only 50 % of the total memory is available for the operating system. Two types of mirroring modes are available: Intrasocket Mirroring - Memory Mirroring within CPUMEMR Memory will be mirrored from one memory controller to the other memory controller within the same CPU. Intrasocket Mirroring is possible for all CPU up to 4 CPUs. When enabling Memory Mirroring in case of 4 socket configuration, same DIMMs must be populated between DDR channel (ABCD) and (EFGH). Memory Mirroring is configured within CPUMEMR. This means same size of DIMMs must be populated as below - DIMM# (1B, 1D, 1F, 1H) should be same size of DIMMs. - DIMM# (1A, 1C, 1E, 1G) should be same size of DIMMs. - DIMM# (2B, 2D, 2F, 2H) should be same size of DIMMs. - DIMM# (2A, 2C, 2E, 2G) should be same size of DIMMs. Intersocket Mirroring - Memory Mirroring between CPUMEMR Memory will be mirrored from one memory controller to an memory controller on another CPU. Intersocket mirroring is only possible with 6 or 8 CPUs. When enabling Memory Mirroring in case of 6 or 8 socket configuration, all four DIMMs must be same size within CPUMEMR. - DIMM# (1B, 1D, 1F, 1H) should be same size of DIMMs. - DIMM# (1A, 1C, 1E, 1G) should be same size of DIMMs. - DIMM# (2B, 2D, 2F, 2H) should be same size of DIMMs. - DIMM# (2A, 2C, 2E, 2G) should be same size of DIMMs. In addition to this, same configuration must be kept between CPUMEMR (1,2), (3,4), (5,6), (7,8) because Memory mirroring will be configured between CPUMEMRs.

Memory Mirror for up to 4-S (Intra-Socket Mirroring)

Memory Mirror for 6-S and 8-S (Inter-Socket Mirroring)

Memory DIMM population Order


System configurator and order-information guideC PRIMERGY RX900 S1 Status 2011-12-30 0

Max. Capacity / Features

The system can be equipped with up to128 DIMMs (distributed on 8 CPUMEMRiser boards)

Each DIMM slot can optionally be equipped with 2GB, 4GB, or 8GB DDR3 DIMM modules,

so the maximal memory size is 1024GB with 8GB modules.

ECC with SDDC (Chipkill) is standard for RX900 S1.

Max. Memory Speed depends on CPU QPI Speed, but is limited to 1066 MHz.

S26361-F4472-E3

Mirrored Mode Installation

BIOS setup for Mirrored mode

Preinstallation ex factory

max. 1x per system

S26361-F4472-E643 S26361-F4472-E644 S26361-F4472-E645

Memory 8GB Memory 16GB Memory 32GB

min. DDR3 DDR3 DDR3

2x consisting of consisting of consisting of

mem 4x 2GB modules 4x 4GB modules 4x 8GB modules

upgr. occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots

max. 32x per system max. 32x per system max. 32x per system

S26361-F4472-E643 S26361-F4472-E644 S26361-F4472-E645


up to 3x14x DDR3 DDR3 DDR3

memory consisting of consisting of consisting of

upgrades 4x 2GB modules 4x 4GB modules 4x 8GB modules

occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


S26361-F4470-E100 Upgrade path is

CPUMEMR - CPU Memory Riser Board - 2x CPUMEMR and 2 CPUs

A minimum of 4 CPUMEMR must be configured for CPUMEMR slot 5 and 6

- 1x CPU Socket for Intel Xeon processor 7500 series - 4x CPUMER and 4 CPUs

2 or 4x with 1066 or 1333MHz Frontside Bus incl. passive heat sink for CPUMEMR slot 5 to 8

- 16 Memory DIMM Slots for DDR3 DIMM

Other CPUMEMR upgrades

max. 4 CPUMEMR per System are not supported!

One of the following CPU´s must be configured

per CPU Memory Riser Board

E7540 (6 core 2.00Ghz / 18M / 6.4GT/s 105W / HT) S26361-F4471-E540

2 or 4x X7542 (6 core 2.67Ghz / 12M / 5.8GT/s 130W) S26361-F4471-E542

X7550 (8 core 2.00Ghz / 18M / 6.4GT/s 130W / HT) S26361-F4471-E550

X7560 (8 core 2.26Ghz / 24M / 6.4GT/s 130W / HT) S26361-F4471-E560

S26361-F4472-E643 S26361-F4472-E644 S26361-F4472-E645


DDR3 DDR3 DDR3

up to 16x consisting of consisting of consisting of

memory 4x 2GB modules 4x 4GB modules 4x 8GB modules

upgrades occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


D


System configurator and order-information guide

D PRIMERGY RX900 S1 Status 2011-12-30

Section IV USB devices / optical devices

Setup RX900 S1 by SV Installation Manager is supported with following configurations:

built in CD/DVD or USB CD/DVD, no Floppy disk drive:

UNC Network share reachable

Following USB Components are available

1) USB DVD SM / Blu-Ray as soon as available

External SuperMulti Drive

External Blu-Ray Drive

2) USB Keyboard: S26381-K340-V120

KBPC PX D, professional keyboard

3) USB Mouse: S26381-K430-L100

Laser Moue USB/PS2 Combo

4) USB Sticks:

MyUSBS A910 8GB, MLC Flash S26391-F6048-L208

MyUSBS A910 16GB, MLC Flash S26391-F6048-L216

Additionally a monitor can be connected to the VGA 15-pin interface.

S26361-F3531-E2 S26361-F3269-E2

Blu-ray Combo slim SATA DVD-RW supermulti slim SATA

6x BD-ROM, 16x DVD, 40x CD all formats, DUAL/DL, DVD-RAM

1x BD DL and all CD/DVD formats only W2K, W3K and Linux

0.5 x 5.25", black bezel 0.5 x 5.25", black bezel

max. 1x per system max. 1x per system

E


System configurator and order-information guideE PRIMERGY RX900 S1 Status 2011-12-30

Section V Hard disk drives

S26361-F3298-E32 S26361-F3298-E64

SSD 32GB SSD 64GB

Solid State Disk Solid State Disk

SATA 3Gb/s SATA 3Gb/s

hot plug/hot replace tray hot plug/hot replace tray


max. 8

SAS 6Gb/s 2.5" with hot plug/hot replace tray

300GB 10000rpm,<4,5ms, 8MB Cache S26361-F4482-E130 configuration of 450GB 10000rpm,<4,5ms, 8MB Cache S26361-F4482-E145 SAS-HDDs requires600GB 10000rpm,<4,5ms, 8MB Cache S26361-F4482-E160 SAS RAID controller900GB 10000rpm,<4,5ms, 8MB Cache S26361-F4482-E190

73GB 15krpm,<4,5ms, 8MB Cache S26361-F4482-E573

146GB 15krpm,<4,5ms, 8MB Cache S26361-F4482-E514

max. 8x per system

SSD SAS 2.5"

S26361-F4541-E100 S26361-F4541-E200 S26361-F4541-E400

SSD SAS 100GB, SLC SSD SAS 200GB, SLC SSD SAS 400GB, SLC

Solid State Disk Solid State Disk Solid State Disk

SAS 6Gb/s SAS 6Gb/s SAS 6Gb/s

Enterprise Perfomance Enterprise Perfomance Enterprise Perfomance

hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray


Section VI PCIe-SSD

only on special release

S26361-F4522-E321 S26361-F4522-E641

PCIe-SSD 320GB MLC PCIe-SSD 640GB MLC No mix of

ioDrive 320GB ioDrive 640GB 320GB and 640GB SSD

PCIe 1.1 PCIe 1.1 possible

PCIe x4, Low Profile PCIe x4, Low Profile


G



G PRIMERGY RX900 S1 Status 2011-12-30

Section VII internal SAS RAID 0/1 and RAID5 Controller for HDD´s

S26361-F3554-E512

RAID Ctrl SAS 6G 8port internal

Based on chip LSISAS2108

LSI MegaRAID Modular RAID controller must be ordered, if at least one internal HDD is configured!

512MB Cache with ECC

1x RAID 0, 1, 10, 5, 50, 6, 60

optional BBU

Support for 3Gb/s and 6Gb/s

SATA and SAS hard drives

PCIe x4

Low-profile MD2 form factor

max. 1x per system

S26361-F3257-E170

Cache Battery Backup Unit BBU max. 2x per system possible

with 70cm cable set for loose delivery please order

max. 2x per system S26361-F3257-L110

H



G PRIMERGY RX900 S1 Status 2011-12-30

Section VIII external SAS controller

The number of max. I/O PCIe controllers highly depends

on the numer of CPUMEMR!

The following Table describes the max. number of PCIe

controller slots

CPUMEMR PCIe slots PCIe slots (PHP)

The showm max. numer of each controller is valid,as far

as the numer of PCIe slots are available also.

A. SAS controller for external backup drives

S26361-F3271-E1

SAS Controller 3Gb/s 8 port

LSI SAS3442E-R

max. 3x PCIe x4, The 3Gb/s SAS Controller is basically for SX10 S2

int: 4 port due to the fact that SX10 S2 supports 3Gb/s only.

ext: 4 port We have to withdraw the controller because it can't

max. 3x per system run under UEFI BIOS.

We will release the controller with UEFI support soon.

Same controller but new order number!

B. SAS RAID controller for JBOD subsystems

S26361-F3593-E1

8 port SAS RAID Controller The RAID controller can be used only for the connection of

LSI external subsystems (FibreCAT SX40, Eternus JX40)

MegaRAID SAS9280-8e 6Gb/s

512MB Cache with ECC Cables for the connection from the RAID Controllers

RAID 0, 1, 10, 5, 50, 6 & 60 to the subsystem see configurator FibreCAT SX40

without iBBU The usage of the internal SAS ports is not supported !

SAS 6Gb/sec

max. 2x 8 port external

PCIe x4, 167mm

full height bracket

max. 2x per system

S26361-F3257-E170

Cache Battery Backup Unit BBU max. 2x per system possible

with 70cm cable set for loose delivery please order

max. 2x per system S26361-F3257-L110

P

0

4

4

4

6

8

7

7

12



PRIMERGY RX900 S1 Status 2011-12-30P

Section IX Fibre Channel


on the numer of CPUMEMR!


controller slots


4 7 0

6 7 4

8 12 4

The showm max. numer of each controller is valid,as far

as the numer of PCIe slots are available also.

S26361-F3961-E1 S26361-F3961-E2

8GBit/s FC Controller 8GBit/s FC Controller

Emulex Emulex

LPe1250, full height bracket LPe12002, full height bracket

8x 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller

LC Interface for 50µm Fiber LC Interface for 50µm Fiber

PCIe x4, 170mm PCIe x4, 170mm


All controllers for the connection of external storage systems are delivered without cables.

For the configuration of external cabling see the configurator for external storage systems.

For Fibre Channel SAN also other componets like switches, SFPs and optical wires are

orderable (for details see price liste)

Q



I PRIMERGY RX900 S1 Status 2011-12-30

Section X Communication / Network


on the number of CPUMEMR!


controller slots


4 7 0

6 7 4

8 12 4

The shown max. number of each controller is valid, as far

as the number of PCIe slots are available also.

on-board LAN Controller

3x Dual Gbit Ethernet Contr. on-board Teaming: Failover, Load Balancing

Intel 82576 NS (Kawela wo/IPsec) The Intel LAN Controllers Pro 1000MT, 1000MF, 1000PT, 1000PF

can be used with the on-board controller in Teaming Mode

ext: 6x RJ45 connector, Cat 5 Two onboard LAN ports can likewise educate a team.

1x Dual 10Gbit Ethernet Contr. on-board

Intel 82599 (Niantic wo/IPsec) Onboard Ethernet Controller

The onboard controller are configured in the Basic Unit already.

ext: 2x SFP+ connector

while stocks last

S26361-F3555-E900

SFP+ Module MMF 10GbE LC

SFP+ module for 10 Gbit The SFP+ Module is also available as loose delivery

Ethernet FO cabling S26361-F3555-L900

ext:LC-connector Instead SFP+ Modules, SFP+ twinax cables from

max. 2x per adapter the switch vendors may be used

A) Single Port LAN Adapter PCIe

S26361-F3242-E1 (Sheepshead Bay)

Gigabit Ethernet Contr. 1000SX

Eth Ctrl 1x1Gbit PCIe Pro/1000PF LC

Intel PRO/1000 PF Server Adapter

PCIe x4

ext:LC-connector

max. 8x per system

B) Dual Port LAN Adapter PCIe x4/x8

S26361-F3610-E2

Gigabit Ethernet Controller Dual 1000TX

Eth Ctrl 2x1Gbit PCIe x4 D2735 Cu Loose delivery with:

Intel Kawela based 2 port Server Adapter S26361-F3610-L502

8x PCIe x4,

ext: for RJ45-plug, Cat 5

max. 8x per system

C) Quad Port LAN Adapter PCIe x4

S26361-F3611-E1

Gigabit Ethernet Controller Quad 1000TX

Eth Ctrl 4x1Gbit PCIe x4 D2745 Cu

Intel Barton Hills based 4 Port Server Ad.

PCIe x4, Loose delivery with:

ext: for RJ45-plug, Cat 5 S26361-F3611-L501

max. 8x per system

I1



I1 PRIMERGY RX900 S1 Status 2011-12-30

D) 10GbE 2-Port SFP+ for MMF Module and SFP+ Twinax Cable

while stocks last

S26361-F3555-E1 (Spring Fountain DD) only on special release

10 Gigabit Ethernet Contr. dual port SFP+

Eth Ctrl 2x10Gbit PCIe x8 X520-DA2 SFP+

Intel Ethernet Server Adapter X520-DA2

PCIe x8

ext:SFP+ for MMF LC Module or Twinax cable

max. 8x per system

while stocks last

S26361-F3555-E900 only on special release The SFP+ Module is also available as loose delivery

SFP+ Module MMF 10GbE LC S26361-F3555-L900

SFP+ module for 10 Gbit Instead SFP+ Modules, SFP+ twinax cables from

Ethernet FO cabling the switch vendors may be used

ext:LC-connector

max. 2x per adapter

2

2

S26361-F3629-E2 4

(D2755) 4

10 Gigabit Ethernet Contr. dual port SFP+ 4

4x Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ The controller is delivered without SFP+ modules for optical cables, these must be ordered

Intel Niantic based dual port 10Gb NIC separately. Without SFP+ modules copper twinax cables are supported.

PCIe x8, Low Profile, Full Height Bracket The adapter is also available as loose delivery with

ext: 2x SFP+ cage FH and LP bracket included: S26361-F3629-L502

max. 4x per system

S26361-F3986-E3 The SFP+ Module is also available as loose delivery

SFP+ Module MMF 10GbE LC S26361-F3986-L3

SFP+ module for 10 Gbit Instead SFP+ Modules, SFP+ twinax cables from

Ethernet FO cabling the switch vendors may be used

ext:LC-connector

max. 2x per adapter

S26361-F3592-E2

10GBit/s CNA

Emulex Lose Lieferung über: S26361-F3592-L2

OCe10102

2 channel 10GBit/sec CNA

SFP+ Cage The controller is delivered without SFP+ modules for optical cables, these must be ordered

PCIe x8, 170mm separately. Without SFP+ modules copper twinax cables are supported.

max. 8x per system

S26361-F3592-E108

SFP+ Module MMF 10GbE LC

SFP+ module for 10 Gbit The SFP+ Module is also available as loose delivery

Ethernet FO cabling S26361-F3592-L108

ext:LC-connector Instead SFP+ Modules, SFP+ twinax cables from

max. 2x per adapter the switch vendors may be used

J



J PRIMERGY RX900 S1 Status 2011-12-30

Section XI System Management Products (RemoteView)

S26361-F1790-E241

iRMC S2 advanced pack

integrated remote management controller

activation key for

graphical console redirection

and remote media redirection

max. 1x per system

Be aware of import restrictions!

S26361-F3552-E1 Loose delivery for later

TPM Module integration possible for customer.

Trusted Platform Module on Motherboard

Use according to import restrictions S26361-F3552-L1

max. 1x per system TPM Module add-on kit

for later integration (loose delivery)

Trusted Platform Module on Motherboard

Use according to import restrictions

max. 1x per system

Section XII Optional PSU / power cords

Base system will be shipped with two PSUs and power cords ICE320 C14->C19

for rack installation. Country specific power cords are not required.

S26113-F573-E10

3. power supply module

2000W, hot plug

for 2+1 redundancy

incl. 1x power cord ICE320 C14->C19 (2,5m)

max. 4x per system

For later upgrade the following kit is available:

S26113-F573-E10 S26113-F573-L10

4. power supply module 4. power supply module

2000W, hot plug 2000W, hot plug for 2+2 redundancy for 2+2 redundancy

incl. 1x power cord ICE320 C14->C19 (2,5m) incl. 1x power cord ICE320 C14->C19 (2,5m)


End PRIMERGY RX900 S1



PRIMERGY RX900 S1 Status 2011-12-30

Change Report

Date Order number Changes

2011-12-21 S26361-F4482-E114 SAS HD 6G 144GB - no longer available

2011-10-10 S26361-F2201-E20 Cable arm adjusted

2011-10-01 S26361-F3298-E64 64 GB SSD - no longer available

2011-05-03 S26361-F3610-E2/L502 Formal change from E1 / L501

2011-03-31 S26361-F3629-E2 10 Gigabit Ethernet controller added

2011-03-18 S26361-F4522-Exxx PCIe SSD added

2010-09-30 S26361-F3611-E1 New Quad LAN GbE controller - now available

2010-09-30 S26361-F3610-E1 New Dual LAN GbE controller - now available

2010-07-01 First Release


Documents

PRIMERGY RX900 S1 - Fujitsu · Fujitsu Technology Solutions PRIMERGY Server 2 of 17. ... - Windows Server 2008 R2 Datacenter # Open Enterprise Server ***) - Windows Server 2008 R2