PROFICIENCY TESTING PT programs 2021

Once Certi�ed .. Globally Recognized

www.inspeedglobal.com [email protected]+44 793 084 0449@InspeedGlobal

Accredited PT Provideraccording to

ISO/IEC 17043:2010

Interna�onal LaboratoryAccredita�on Coopera�on

Registered MemberID number 590861

bundesanstalt für material-forschung und prüfung

PROFICIENCY TESTING PT programs

2021

version 5


Inspeed Global – IG – is the first accredited PT provider by PJLA – US accreditation body – according to: ISO/IEC 17043:2010

01


IG is a worldwide company that is accredited as the first PT provider by PJLA (USA) according to ISO/IEC 17043:2010. IG has international offices in different countries to deliver the services of conformity assessment that includes; Proficiency Testing to Testing and Calibration Laboratories that implement ISO/IEC 17025 : 2017 Scope of Accreditation.

Our PT programs cover the scope of:

02

Construction Materials

Metallic Materials

Non-Destructive Testing (NDT)

Customized PT programs

PAGE

PAGE

PAGE

PAGE


PT Requirements for some accreditation bodies:

03

Accreditation Requirements for UKAS

Laboratories preparing for initial accreditation or wishing to extend their scope of accreditation are required to participate in PT/ILCs where such schemes are available UKAS Policy on Participation in Proficiency Testing TPS 47 (4.6)

Accreditation Requirements for EIAC

The laboratory shall participate in Proficiency testing program (PTP) organized by any competent PTP provider and shall provide evidence that their results are within the acceptance criteria of the PTP organizer. The minimum amount of participation in proficiency testing schemes: EIAC-RQ-LB-002 (4.6.2) 4 times per year for all the critical tests 2 times per year all tests

EIAC-RQ-LB-001 (12.2.7) One activity related to each discipline at least once a year.

Accreditation Requirements for GAC

• The CAB is required to cover PT participation/ILC for all its activities

• If a CAB does not participate or participates only partially in PT/ILC, which are available and adequate then it might have consequences for the accreditation of the CAB

BD-091007-08-04 TN 4.0: GAC Technical Note 4 Proficiency Testing and ILC Policy (3.1)

Accreditation Requirements for IAS

Laboratories that are accredited or seeking accreditation to ISO/IEC Standard 17025 are expected to participate in at least one proficiency test (PT) for each field of accreditation. The laboratory is expected to complete the PT(s) within four years. IAS POLICY ON PROFICIENCY TESTING FOR LABORATORIES


choose IG PT programs for:

04

1020 par�cipa�ng laboratories worldwide in 2019 & 2020.

More than 112 PT

programs annually.

Flexibility to organize customized PT programs according to the labs’ needs.

Less than 20 days turnaround �me for most of our PT reports.

Highly commi�ed to schedules and quick reply for technical ques�ons.

Full member of the European PT Informa�on System (EPTIS).

Sta�s�cal evalua�on according to the latest interna�onal standards (ISO 13528& ISO 5725 1-6)

The First accredited PT provider (ISO/IEC 17043) by the US accredita�on body PJLA.

A�er successful performance in 2019 & 2020

in organizing of the proficiency tes�ng

programs and accredita�on according to

ISO/IEC 17043.

We are looking forward to working together in 2021

PT programs for the year 2021

CONSTRUCTION MATERIALS TESTING


Soil Testing:

05

PT-CON- 21-101400 $ January

JulyNovember

Determination of liquid limit , Plastic Limit and Plasticity IndexASTM D 4318-17e1 / BS1377:Part 2:1990,CL 4.3,4.5 &5

01

02

03

04

05

06

SOIL TESTING


JulyNovember

Determination of Particle Size DistributionASTM D 422-2007 / BS 1377: part2: 1990,CL9.2&9.3

PT-CON- 21-105400 $ JanuaryJuly

November Particle Size Distribution by hydrometer methodASTM D 422-2007 / BS 1377: part2:1990,CL 9.5


JulyNovember Determination of California Bearing Ratio (CBR)

BS1377:Part 4:1990,CL 7


JulyNovember

Determination of dry density/moisture content relationshipASTM D 1557-12e1 / BS 1377:part 4:1990,CL3.5/3.6

PT-CON- 21-127400 $ July

November Determination of Sand equivalent valueASTM D 2419-14/ BS EN 933- 8:2012+A1:2015


Chemical/soil Test:

06

PT-CON- 21-106400 $ March

September Determination of pH Value of SoilBS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018 Cl 12

01

02

03

Chemical/soil Test

PT-CON- 21-107

400 $ MarchSeptember

Determination of the Sulphate Content of Soil (Water Extract & Acid Extract) BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 5.2/ 5.5 & 5.3/5.5BS 1377:Part 3 2018 Cl 7.3 / 7.6BS 1377:Part 3 2018 Cl 7.9 / 7.6

PT-CON- 21-108

400 $ MarchSeptember

Determination of the Chloride Content of Soil (Water Extract & Acid Extract)BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 7.2 & 7.3BS 1377:Part 3 2018Cl 9.2


Aggregate Test:

07


September Determination of Aggregate Crushing ValueBS 812-110:1990

01

02

03

04

05

06

Aggregate Test


SeptemberFlat Particles, elongated particles or flat and elongated particles in coarse aggregateASTM D 4791-10 / BS 812-150.1:1989 and BS 812 - 105.2:1990

PT-CON- 21-110400 $ MarchSeptember Determination of shell content-

Percentage of shells in coarse aggregatesASTM D 422-2007 / BS 1377: part2:1990,CL 9.5

PT-CON- 21-112400 $

March Density, Relative density (Specific gravity) and absorption of fine aggregatesASTM C 128-15 / BS 812 Part 2;1995

PT-CON- 21-117400 $ March Determination of Ten Percent fine value of Aggregates (Dry & Soaked)

BS 812-111:1990, CL 7.1 & 7.2

PT-CON- 21-120400 $

March Resistance to degradation of small and large size aggregate by abrasion and impact in the Los Angeles Machine ASTM C 535-16


Aggregate Test:

08

PT-CON- 21-124450 $

September Determination of Particle Size distribution(Wet & Dry Sieving)Section 103.1,CL7.2&7.3 /BS EN

07

08

09

10

Aggregate Test

PT-CON- 21-125400 $ September Determination of Clay Lumps and Friable Particles

ASTM C 142 / C 142M-17

PT-CON- 21-132400 $September Sieve analysis of fine and coarse aggregates

ASTM C 136 / C 136 M-14

PT-CON- 21-135400 $September Determination of Aggregate Impact Value

BS 812-112:1990


Concrete Test:

09


MayJuly

Determination of Water Absorption on hardened concreteBS 1881-122: 2011

01

02

03

04

Concrete Test


MayJuly

Determination of the initial surface absorption of concrete BS 1881-208:1996

PT-CON- 21-123400 $ JanuaryMayJuly

Determination of depth of penetration of water under pressure/ Determination of Water PermeabilityBS EN 12390-8: 2009/ DIN 1048-5:1991


MayJuly

Method for determination of compressive strength of concrete cubes BS 1881 Part 116 BS EN -12390-3:2009


Bitumen Test:

10

PT-CON- 21-114500 $ June

October Determination of Ductility of Bituminous MaterialsASTM D 113-07

01

02

03

Bitumen Test

PT-CON- 21-115500 $ June

October Determination of Penetration of Bituminous MaterialsASTM D 5 -2013

PT-CON- 21-116500 $ JuneOctober Determination of Softening Point of Bitumen

ASTM D36/D36M- 14e1


Asphalt Test:

11

PT-CON- 21-118400 $ February Standard Test Methods for Quantitative Extraction of Bitumen

From Bituminous Paving Mixtures ASTM D2172 / D2172M-1701

02

03

AsphaltTest

PT-CON- 21-119400 $

February Standard Test Methods for Mechanical Size Analysis of Extracted Aggregate ASTM D 5444 – 15

PT-CON- 21-131400 $ FebruaryApril Standard Test Method for Theoretical Maximum

Specific Gravity and Density of Bituminous Paving Mixtures ASTM D2041/ D2041M-11


Chemical- Ground Water Test:

12

PT-CON- 21-128400 $ April

December Determination of the Chloride Content of Ground WaterBS 1377:1990 Part 3 Amd. 9028- 96 Cl.7.2

01

02

03

Chemical- Ground

Water Test

PT-CON- 21-129400 $ April

December Determination of the Sulphate Content of Ground WaterBS 1377:1990 Part 3Amd. 9028- 96 Cl.5.4

PT-CON- 21-130400 $ AprilDecember Determination of the pH value

BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018 Cl 12


METALLIC MATERIALS TESTING


Steel /Metallic material:

13

Steel /Metallic material

01

02

03

04

05

06

PT-MET- 21-001400 $ February

JuneOctober

Bend testASTM E190 - ASTM E290 - ASTM A370


JuneOctober

Tensile testing at ambient temperatureASTM E8/E8M ASTM A370 BS EN ISO 15630 ISO 6892 AS 1391 BS 4449:2005

PT-MET- 21-003400 $ FebruaryJune

OctoberVickers hardness testASTM E92 BS EN ISO 6507


OctoberRockwell hardness test (HRC &HRB)ASTM E18 BS EN ISO 6508


JuneOctober

Brinell hardness testASTM E10 BS EN ISO 6506


OctoberNotched Bar Impact Testing of Metallic MaterialsASTM E23 ASTM A370 BS EN ISO 148 AS 1544


Load test:

14

Load test

01

02

03

04

05

PT-MET- 21-013500 $April cast iron

Load Test- Gully tops and manhole tops made of cast iron BS EN 124-2

PT-MET- 21-014500 $April steel or aluminum alloys

Load Test- Gully tops and manhole tops made of steel or aluminum alloys BS EN 124-3

PT-MET- 21-015500 $April steel reinforced concrete

Load Test- Gully tops and manhole tops made of steel reinforced concrete BS EN 124-4

PT-MET- 21-016500 $April composite materials

Load Test- Gully tops and manhole tops made of composite materials BS EN 124-5

PT-MET- 21-017500 $

AprilPolypropylen e (PP), olyethylene (PE) or poly(vinyl chloride)Load Test- Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or un- plasticized poly(vinyl chloride) BS EN 124-6


Chemical composition:

15

Chemical composition

01

02

03

04

05

PT-MET- 21-007400 $ AprilDecember Carbon and low alloy Steel: Determination

of chemical composition of using Spark optical Emission Method ASTM 415

PT-MET- 21-008400 $ AprilDecember Stainless steel :Determination of chemical composition

of using Spark optical Emission Method ASTM E1086

PT-MET- 21-009400 $December Cast Iron: Determination of chemical composition

of using Spark optical Emission MethodASTM E1999

PT-MET- 21-010400 $December Cupper alloys: Determination of chemical composition

of using Spark optical Emission MethodBS EN ISO 15079

PT-MET- 21-011400 $April

December Aluminum alloys: Determination of chemical composition of using Spark optical Emission MethodASTM E1251


Non-Destructive Testing (NDT)


Non Destructive testing:

16

PT-MET- 21-301800 $

December Standard Practice for Liquid Penetrant Examination for General Industry ASTM E165/E165M/ ASME 0 Sec. V

01

02

03Non

Destructive Testing

PT-MET- 21-302800 $

December Standard Guide for Magnetic Particle TestingASTM E709/ ASME 0 Sec. V

PT-MET- 21-303800 $December Determination of ultrasonic pulse velocity

BS EN 12504 Part 4


Customized PT Programs

www.inspeedglobal.com [email protected]+44 793 084 0449@InspeedGlobal17

Polymers testing08.

Glass testing07.

Ceramic & tilestesting

06.Paints testing

05.

Textile testing04.

Metals testing03.

Minerals Testing02.Precious Metals

Testing

01.

Customized PT Programs:We provide customized PT programs according to the needs of your lab scope of testing which comply with the international requirements of ISO/IEC 17043 and ISO 13528 in the following scope of testing:• IG can customize PT programs according to our customer request.• Customer can select any test and we will customize this program.• Customer will define the date of this customized program and will get samples at the defined date.• Cost of Customized Program is USD 800$/test


3 On Time with AccurateReports

2 Saving your Money and Time

4 High Quality and Well-controlled Samples

1 Totally understands your needs

5 24/7 is our service

WHY YOU CHOOSE PT

FROM IG:


SATISFACTORY RESULTS PACKAGE:The lab participates in the PT with satisfactory results will receive a formal certi�cate of Success in PT program issues by IG.

Registration for PT program

• Registration deadline for each programs is 20 days prior to dispatching of samples date.• For registration in a PT program please contact us at: [email protected] or via our website www.inspeedglobal.com

Shipping:Rates mentioned here are including the packaging cost but excluding the shipping charges. The actual cost of shipping will be paid by the participant along with PT fees.

Florida, USA

Birmingham, England

Göteborg, Sweden

Istanbul, Turkey

Doha, Qatar

Cairo, Egypt

Dubai, UAE

Muscat, Oman

IG Main Worldwide Offices are in:


Inspeed Global – IG, is a worldwide conformity

assessment company that provides a wide range

of services including;

1- Proficiency Testing – PT,ISO/IEC 17043:2010

2- Inspection,

3- Personnel Certification,

4- Management System Certification,

5- Halal Certification,

6- Training,

7- Business Solutions and

8- Quality Software.

ABOUT US

IG offices and collaboration agreements are covering the whole regions of the world, for our main purpose is to be close to our customers everywhere.

IG Message:

Once Certified .. Globally Recognized

IG main strategic view is based on:IG Vision:To be one of the best and leading conformity assessment companies in the world specially in Proficiency Testing – PT, Personnel Certification and Inspection.IG Mission:Inspeed Global – IG – is a worldwide company that has international offices in different regions and working under the values of Accuracy, Speed, Integration & Collaboration and Transparency, to deliver to its valuable and honorable customers the services of conformity assessment that includes; Proficiency Testing – PT, Inspection, Personnel Certification, Management System Certification, Halal Certification, Training, Business Solutions and Quality Software.IG Values:1- Accuracy2- Speed3- Integration & Collaboration4- Transparency


For contact, register and any inquiry:

www.inspeedglobal.com E-Mail: [email protected]

Int. Marketing & Customer Relations:

+44 793 084 0449 (Call & WhatsApp) +90 553 775 1648 (Calls)

English and Arabic conversations are available

+44 793 084 0449+90 553 775 1648

Documents

PROFICIENCY TESTING PT programs 2021