Quality Machine Tools - Walker Singleton

Quality Machine ToolsInstructed by the Administrators of Joseph Rhodes Limited and Slater and Crabtree Limited

Location: Wakefield, West Yorkshire

On View: 14 November 2017

Takisawa EX-122 Horizontal Machining Centre

Hankook VTC85R CNC Turning Centre

Mandelli Twin Pallet Machining Centre

Elgamill CS10 Milling Machine

Kearns Richards SJ100 Horizontal Borer

Kearns Richards SE150 Horizontal Borer

Asquith 4RM Floor Borer

Butler SE8A Gantry Type Twin Plano Miller

Noble and Lund Type 204H Double Column Plano Miller

Cincinnati Milacron 20H-1250 MillerDSG Type 21 Gap Bed Lathe

Henley Hercules 26 Diesel12 Tonne Forklift Truck

Large Quantity of Tooling

Mori-Seiki SL-25 CNC Machining Centre

Toshulin SKIQ 20 Cross Rail VerticalCNC BorerBohner and Kohle Boko WF 1/6 Miller (x3)LK G80 Microvector Co-ordinate Measuring Machine

For further information visit our website: richmondadvisory.co.uk

To register your interest please email:[email protected]

Or contact:Tel: 01134 673080

WS Richmond MTI Mag 210x297mm 10.17.indd 1 12/10/2017 09:18

GENERAL CONDITIONS OF SALE

1. Interpretation

1.1. In these General Conditions the following words and expressions shall have the meanings set opposite:

“Auction” any auction (whether a Live Auction or an Online Auction and whether conducted independently or simultaneously) conducted pursuant to these

General Conditions and the Special Conditions;

“Auctioneer” the person conducting the Auction or to whom the conduct of the Auction is delegated under General Condition 4.9 below;

“Bidder” any person who offers to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender;

“Bid” an offer to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender, and “Bids” and “Bidding” shall be

construed accordingly;

“Buyer” any person who agrees to purchase any Lot whether at Auction or by private treaty or tender and as determined under General condition 4.12

below;

"Buyer's Premium" a commission payable by the Buyer on the completion of a Sale the amount of which is set out in the Special Conditions; The Auctioneer, when

acting as Agent for the Seller, may also receive commission from the Seller.

“Catalogue” the catalogue incorporating these General Conditions and the Special Conditions;

"Clearance Date and Time" the date and time on which all Lots must be removed by the Buyer from the Location as specified in the Special Conditions;

“The Company” Richmond Advisory Limited (company number 09050607) whose registered office is at 5A King Street, Leeds, LS1 2HH

"Deposit" the sum payable by the Buyer to the Company as set out in the Special Conditions;

"Live Auction" any auction conducted at the Location or at such other location(s) as shall be notified by the Company in the Special Conditions or in the

Catalogue;

“Location” the premises at which the Lots are located, details of which are set out in the Special Conditions;

“Lot” any Lot described in the Catalogue, on a relevant website or on the Company’s invoice;

"Online Auction" any auction conducted over the internet via a relevant website pursuant to these General Conditions and the Special Conditions;

"Sale" the sale of any Lot by Auction, private treaty or tender and as determined under General Condition 4.11 below;

“Seller” the person upon whose instructions the Company is conducting the Sale, details of whom are set out in the Special Conditions;

“Special Conditions” any additions to these General Conditions set out or referred to in the Catalogue, announced at Auction or otherwise specified by the Company;

"VAT" value added tax chargeable under English Law for the time being and any similar additional tax.

2. Application of General Conditions

2.1. These General Conditions apply to every Sale of plant and machinery, chattels and trade stocks conducted by the Company.

2.2. These General Conditions, the Special Conditions and any terms set out in the Catalogue shall together comprise the "Conditions of Sale".

2.3. To the extent that these General Conditions are inconsistent with any Special Conditions, the General Conditions shall prevail.

2.4. Bidding for any Lot shall be deemed to be an acceptance by the Bidder of these General Conditions and the Special Conditions.

2.5. These General Conditions shall be governed construed and enforced in accordance with the laws of England and Wales unless the Location is in:-

2.5.1 Scotland in which case the laws of Scotland shall apply; or

2.5.2 Northern Ireland in which case the laws of Northern Ireland shall apply.

2.6. A reference to writing or written shall include e-mail.

2.7. Any word or phrase having a meaning defined in these General Conditions shall have the same meaning when used in the Special Conditions.

3. Identity of the Parties

3.1. The Company offers each Lot as agent of the Seller and not as principal unless otherwise indicated in the Catalogue.

3.2. The Auctioneer offers each Lot as agent of the Seller and not as principal unless otherwise indicated in the Catalogue.

The identity of the Seller is set out in the Special Conditions.

3.3. Unless the Company has previously acknowledged in writing that the Bidder Bids as agent on behalf of a named principal, every Bidder shall be taken to Bid on his own

behalf as principal.

3.4. Any Bidder acting as agent on behalf of a named principal shall remain liable to the Seller and the Company for all obligations and liabilities of his principal jointly and

severally with the principal. The Bidder warrants that he has the authority of his principal to make each Bid made.

3.5. Every Bidder is required to give his name and address and provide satisfactory proof of identity and such other information and documentation as is required to the

Company before making any Bid and in the case of:

3.5.1. a Live Auction by the completion of a registration form;

3.5.2 an Online Auction by online registration at a relevant website; and

3.5.3 a private treaty or tender by prior registration or notification of details, as and when requested by the Company.

3.6 The Company reserves the right at any time to reject the registration of any persons and refuse access to the Auction at its sole discretion.

3.7 On registration for an Online Auction Bidders will be added to the Company's mailing list for the purposes of notification of future sales by email. If a Bidder wishes to

stop receiving such notifications they can unsubscribe at any time by clicking on the link provided at the bottom of each email.

3.8 On registration in accordance with General condition 3.5 the Bidder acknowledges that only adults aged 18 years and over are entitled to enter into a legally binding

contract and as a result they are the only people entitled to register for the Auction. By registering the Bidder warrants that he is aged 18 years or older and is capable of

forming a legally binding contract and is not bidding or purchasing as a consumer.

4 Conduct of Auctions

4.1 Any Lot may be subject to a minimum bid or reserve price. The Seller is entitled to change these at any time before the conclusion of the Sale.

4.2 The Seller, Auctioneer or any representative, agent or person acting on behalf of the Seller may Bid for any Lot. Persons entitled to Bid pursuant to this condition 4.2

shall be entitled to place Bids on any Lot up to the reserve price including by placing Bids in response to other Bidders.

4.3 Lot descriptions will be amended as appropriate as and when information becomes available to the Company. Prospective Bidders must read Lot descriptions before

making a Bid so that they are fully aware of any amendments to the description appearing in the Special Conditions and/or on a relevant website or in the Catalogue in

relation to a particular Lot.

4.4 The Auctioneer may at any time before the conclusion of the Sale withdraw or divide any Lot or combine any Lots.

4.5 The Company may sell any Lot by private treaty or tender before or after the Auction. The Auctioneer may reject any Bid at his sole discretion and without being

required to give a reason.

4.6 No Bid shall be retracted without the consent of the Auctioneer.

4.7 The Auctioneer may where there is a dispute between Bidders, summarily determine the dispute or immediately again offer the Lot for sale, in each case without being

required to give a reason.

4.8 The Auctioneer shall in every other respect decide how the Auction is to be conducted and without being required to give a reason.

4.9 The Auctioneer may in his sole discretion delegate to a person whom he believes to be competent the conduct of the Auction in accordance with these General

Conditions.

4.10 The Auctioneer may from time to time act jointly with an associated Auctioneer who will be named in the Catalogue and/or in the Special Conditions.

4.11 A Sale is concluded (constituting acceptance of the Bidder's offer, subject to General Condition 4.12 below) when:

4.11.1 in the case of a Live Auction, on the fall of the Auctioneer's hammer; and/or,

4.11.2 in the case of an Online Auction, at the close of the timed Online Auction Sale as specified on a relevant website and as defined by General Condition 4.17.3

below or;

4.11.3 in the case of a private treaty or tender, when the Bidders Bid is accepted by the Company, such acceptance to be communicated to the Bidder in writing by

way of receipt of the Company’s invoice.

4.12 The Buyer shall be the person who made the highest Bid before the conclusion of the Sale pursuant to General Condition 4.11 above subject to approval and acceptance

by the Company, the Auctioneers and the Seller or such other Bidder as the Auctioneer and/ or the Company may declare to be the Buyer without being required to give

a reason. The Auctioneer and/ or the Company and/ or the Seller is not bound to accept the highest Bid or any other Bid placed in the course of the Auction.

4.13 In the case of an Online Auction the Buyer, as determined under General Condition 4.12 above, shall within a reasonable time after the conclusion of the Sale receive by

email an invoice in respect of the monies due for the Lot(s) purchased.

4.14 In the event that the reserve price is not met, the Company may consider the Bids received below the reserve price with the Seller who at its sole discretion may accept,

reject or place a counteroffer.

4.15 On conclusion of the Sale and acceptance of the Bidders Bid pursuant to General Conditions 4.11 and 4.12 above, the Buyer acknowledges and agrees that he has

entered into a contract with the Seller to buy the Lot and the Buyer must complete the transaction to purchase the Lot.

4.16 The Buyer may not remove any Lot he has bought until after the end of the Auction.

4.17 In relation to an Online Auction:

4.17.1 the Company cannot guarantee that the internet services will operate continuously or without interruptions and this could affect the conduct of the Online

Auction and the Bidders ability to Bid online. The Company shall not be liable in any respect in the event of any dispute due to errors, omissions or disruptions

to internet services or power failures or any other unforeseen circumstances which may occur during the Online Auction;

4.17.2 the Auctioneer may at any time, without notice, postpone or cancel an Online Auction or extend an Online Auction beyond the published closing time (including

extension of the timed Online Auction in accordance with General Condition 4.17.3 below);

4.17.3 the timed Online Auction Sale is auto bid extension enabled meaning that where a Bid is placed within ten minutes of the original scheduled close of the timed

Online Auction the scheduled close of the timed Online Auction will automatically be extended by an additional ten minutes. This continues with a new

scheduled close time each time a Bid is placed until no-one places a Bid before the last scheduled close of the timed Online Auction. Every time a Bid is placed

within ten minutes or less left in the Online Auction an additional ten minutes Bidding time is added until there are no more Bids. Such time shall then be

deemed to be the close of the timed Online Auction.

4.18 In the event that the Auctioneer unknowingly sells a Lot that was not eligible for Sale (i.e. there is a third party interest that comes to light) then the Auctioneer shall be

entitled to immediately rescind that Sale without any further liability to the Auctioneer and/or Company or the Seller.

4.19 Copies of the Auctions (Bidding Agreements) Act 1927 and 1969 are held at the Company’s and/or the Auctioneer’s principal place of business.

5 Sale and Payment

5.1 The Buyer shall pay the following sums to the Company in full and without set off:-

5.1.1 immediately upon the Sale of any Lot the Deposit, if requested by the Company; and

5.1.2 the balance of the price of the Lot purchased, together with the Buyer’s Premium by no later than 48 hours after conclusion of the Sale or, in the case of an Online

Auction, after receipt of an invoice in respect of the purchased Lot(s) pursuant to General Condition 4.13 above, or such other time and date as may be specified

in the Special Conditions; and

5.1.3 any other payment or amount due to the Seller and/or the Company pursuant to these General Conditions or the Special Conditions on demand.

5.2 In every case time for payment shall be of the essence.

5.3 In view of Money Laundering Regulations the Company reserves the right to refuse payment in cash. Payments in cash of more than £7,500 will not, in any

circumstances, be accepted.

5.4 If the Buyer fails to make any payment on the due date for payment then, without limiting any other right or remedy available to the Seller, the Buyer shall pay to the

Company interest (both before and after any judgment) on the amount unpaid at the rate of 4% above the bank base rate of Barclays Bank Plc per month or any part

thereof until payment in full is made.

5.5 Until the Buyer has fully complied with its obligations in this General Condition 5:-

5.5.1 title to any Lot bought shall not pass to the Buyer;

5.5.2 the Seller shall have a lien over any Lot bought by the Buyer in the Auction;

5.5.3 if the Buyer effects or purports to effect a resale or any other disposition of all or part of the Lot, the Buyer shall hold the proceeds of resale or other disposition

on trust for the Seller.

5.6 All sums payable under these General Conditions and the Special Conditions are exclusive of any applicable VAT for which the Buyer shall be additionally liable to pay to

the Company. On written request by the Buyer the Company will provide a VAT invoice.

5.7 The Company will only accept payment under this General Condition 5 from the Buyer or its authorised agents.

6 Removal of Lots

6.1 Risk of damage to or loss of the Lot shall pass to the Buyer immediately upon the conclusion of the Sale.

6.2 The removal of Lots from the Location shall be undertaken by the Buyer entirely at its own risk and without any liability whatsoever to the Company.

6.3 Buyers are responsible for any and all costs and expenses incurred in relation to the removal of Lots and any other applicable charges, taxes and insurance costs.

6.4 The Buyer may not remove any Lot until the Buyer has:-

6.4.1 paid by cleared funds all amounts payable pursuant to General Condition 5 above in full; and

6.4.2 if requested by the Company produced satisfactory evidence to the Company that the Buyer has adequate public liability insurance in respect of the indemnity set

out in General Condition 6.11 below and/or deposited with the Company, by way of security for the costs of making good any damage likely to occur, such sum as

the Company may stipulate.

6.5 The Company will only permit the removal of Lots purchased by the Buyer or its authorised agents.

6.6 The Buyer must remove each Lot purchased by the Clearance Date and Time for which time shall be of the essence. Lots may only be removed during normal working

hours or such hours as are specified in the Special Conditions. No clearance on Bank or Public Holidays. In the absence of co-operation the Company and/or the

Auctioneer reserves the right to insist on the order of the removal of Lots or parts thereof.

6.7 Buyers should co-operate regarding order of removal of Lots in order to comply with the Clearance Date and Time. If it transpires that a Buyer makes no effort to

commence dismantling and the particular Lot is preventing other buyers from removing purchased Lots, then the Auctioneer reserves the right to insist that removal

take place immediately notwithstanding the specified Clearance Date and Time. In the event the Buyer does not comply with its obligations under this General Condition

6.7, then the Auctioneer reserves the right to arrange for the removal and/or storage of the Lot and charge any attendant costs to the Buyer.

6.8 If any Lot is unsold and has to be dismantled & lowered to allow the removal of any other lot, then such dismantling & lowering shall be the responsibility of the Buyer of

the relevant Lot(s).

6.9 Title to computer software sold pursuant to the Sale of a Lot is not transferred under any Sale to the Buyer and use is subject to any licence or copyright restrictions and

user conditions. The Sellers, Company and/or Auctioneers reserve the right to erase any private or sensitive information prior to the Sale or at any later date.

6.10 The Buyer and/or his removal contractor must liaise with the Company's site representative prior to commencing dismantling/removal of a Lot from the Location and

must at all times comply with its obligations under clause 6.11 below.

6.11 When removing any Lot from the Location the Buyer shall, or shall procure that its removal contractors shall:

6.11.1 carry out a full assessment of Lot, the Location and the land or buildings to which the Lot is fixed to assess the risks associated with detaching/removing the Lot

and shall fully satisfy themselves that they can detach/remove the Lot in compliance with the Buyers obligations under this General Condition 6.11 prior to

handling and/or commencing removal of a Lot;

6.11.2 obtain all relevant planning permissions (where required) in relation to the removal of building structures and plant housings;

6.11.3 buyers of Lots will be required to make good holes or voids exposed by the removal of Lots. Cladding taken off buildings for removal of plant & equipment will

have to be replaced, unless otherwise specified by the Company;

6.11.4 when detaching any Lot fixed to land or buildings, do so safely and lawfully and must not use flame cutters, explosives or any other dangerous equipment or

process without first obtaining written consent of the Company;

6.11.5 remove the Lot in compliance with all relevant legislation, regulations, codes of practice, guidance, orders, rules and other requirements of any relevant

government or governmental agency or authority whether Parliamentary, statutory, parochial or local including (without limitation) in compliance with the

Health and Safety at Work etc Act 1974, the Environmental Protection Act 1990, The Construction (Design and Management) Regulations 2007, Control of

Substances Hazardous to Health Regulations 2002 (COSHH), and the Road Vehicle (Construction and Use) Regulations 1986 and any subsequent amendments

thereof and all other health and safety and environmental legislation in existence at the time of the Sale. To the extent that such regulations are advisory

rather than mandatory, the standard of compliance to be achieved by the Buyer shall be to the best industry practice;

In all cases arising under this General Condition 6.11 the costs of compliance shall be borne by the Buyer and the Buyer hereby indemnifies the Company and the Seller

against all losses, costs, expenses, damages, liabilities, demands, claims, actions and proceedings which the Company and/or the Seller may incur arising directly or

indirectly out of any breach by the Buyer to the provisions of this General Condition 6.11 and the Buyer shall make good any damage caused to (without limitation) other

lots, the Location or to any property belonging to third parties, in removing any Lot under this General Condition 6.11.

6.12 The Company shall be entitled to halt the clearance of any Lot if in its absolute discretion the removal of a Lot is being carried out in an unsatisfactory manner. Where

the clearance is halted by the Company, the Buyer must liaise with the Company's site representative as to how the Lot should be removed from the Location provided

that the Buyer shall at all times ensure that it complies with its obligations under General Condition 6.11 above and the Company shall have no liability in this regard.

6.13 The Buyer shall provide evidence as and when requested by the Company of the Buyer's insurance policies in respect of the following insurances and at a minimum level

of:

6.13.1. Public Liability Cover - limit Two Million Pounds (£ 2,000,000); and

6.13.2. Employers Liability Cover - limit Ten Million Pounds (£10,000,000);

the Company reserves the right to vary the level of insurance cover stated above at any time, as and when required.

6.14 The Buyer shall provide to the Company a Risk Assessment & Method Statement complying with The Construction (Design & Management) Regulations 2007, COSHH or

with any subsequent amendments thereof or such other legislation as shall from time to time be in force.

6.15 Electric, gas, water, steam and waste disconnections are the responsibility of the Buyer and MUST be carried out by an approved contractor following consultation with

the site representative.

6.16 It is expressly brought to the Buyer’s attention that certain Lots could contain asbestos, noxious chemicals/ substances etc. which if not handled correctly during their

removal could result in breach of Health & Safety at Work legislation and/or Control of Substances Hazardous to Health Regulations or other statutory requirements.

6.17 Any fluids, gases and/ or waste remaining in plant and machinery are the responsibility of the Buyer and MUST be removed from the Location strictly in accordance with

any applicable statutory requirements.

6.18 The Buyer must use safe and lawful means of removing the Lot, must comply with all current statutory requirements and regulations including those relating to the

disposal and removal if waste, and if required, satisfy the Company in relation to their removal procedures; in particular, the removal of waste materials must be

undertaken by an approved and licensed contractor to an approved waste management site.

6.19 In the absence of clicking to accept the form of undertaking attached to these General Conditions of Sale the Buyer acknowledges and agrees to give a written

undertaking pursuant to section 6(8) of the Health & Safety at Work Act 1974 when required to do so.

6.20 It is expressly brought to the attention of the Buyer that certain types of plant or main service installations could contain asbestos, dangerous chemicals etc which if not

handled correctly during their removal from site could be in breach of the Health & Safety at work Act 1974, the Control of Asbestos at work Regulations 2002, the

Asbestos (Licensing) Regulations as amended and the Control of Substances Hazardous to Health Regulations 1988 (COSHH) or any other current legislation covering the

use of such substances in a working environment.

6.21 It is the Buyers or their removal contractors responsibility (i.e. Police, Ministry of Transport, Local Authority) to transport off site long/ wide loads, within sufficient time

prior to the commencement of clearance period as stated in the Special Notes & Conditions.

6.22 The Buyer shall indemnify the Company and the Seller against any loss, damages, expenses, claims or liabilities arising directly or indirectly from the possession or use of

the Lot after title to the Lot has passed to the Buyer but before it is removed from the Location.

6.23 All Lots are sold on the understanding that the Seller does not represent them as being in a condition which makes them suitable for domestic use or for purchase by a

Buyer who is a consumer. If any Lots are intended for domestic use the Buyer must ensure that they comply with the requirements of the Furniture & Furnishings (Fire)

(Safety) Regulations 1988 and any subsequent amendments thereof or such other relevant statutory requirements or regulations as shall from time to time be in force.

6.24 The Buyer undertakes to comply with the provisions of the Data Protection Act 1998 in processing data held by them in connection with any Lot.

7 Default by the Buyer

7.1 If at any time the Buyer has failed to pay the sums specified in General Condition 5 above in full by the due date for payment, or to remove any Lot purchased by the

Clearance Date and Time specified in the Special Conditions the Seller may rescind the Sale of that Lot, in which case any Deposit shall be forfeit, and that Lot may be

resold.

7.2 If the Seller has rescinded the Sale but the Buyer has removed the Lot purchased, the Seller shall be entitled without previous notice to enter upon any premises where

he believes the Lot to be and remove it.

7.3 If the Seller has rescinded the Sale and the Lot has been resold by the Auctioneer and/or the Company or by the Seller, the Buyer shall reimburse the Seller with any

shortfall where:-

7.3.1 the resale price less the Sale price; and

7.3.2 the costs incurred by the Seller incidental to the resale.

7.4 If the Buyer fails to remove any Lot by the Clearance Date and Time specified:-

7.4.1 the Seller may remove the Lot from the Location and leave it outside at the Buyer’s risk in all respects;

7.4.2 the Seller may charge the Buyer for the reasonable costs of storage;

7.4.3 the Seller may charge the Buyer rent, taxes, men's wages and expenses incurred as a result of the Lot(s) remaining at the Location; and

7.4.4 the Buyer shall indemnify the Seller against any loss, damages, expenses, claims or liabilities incurred by the Seller arising from the Buyer’s failure to remove the

Lot from the Location.

8 Acknowledgements and Exclusion of Warranties

8.1 The Buyer acknowledges that in agreeing to purchase any Lot he is not relying on any warranties or representations made by the Seller or the Company or any of their

employee’s agents or representatives. All representations, warranties and conditions, express or implied, statutory or otherwise in respect of all and any of the Lots are

expressly excluded and without limitation any warranties and conditions as to title, quiet possession, satisfactory quality, fitness for purpose and description are

excluded to the fullest extent as permitted by law.

8.2 The Buyer further acknowledges that neither the Sellers nor the Company shall in any circumstances be liable to or to compensate the Buyer nor shall the Buyer be

entitled to rescind the Sale or reject any Lot for an error omission or misstatement contained in the Catalogue and/or in the Special Conditions.

8.3 The Buyer also acknowledges that:-

8.3.1 all the Lots are purchased on the basis that risk of good title to all or any of them passing to the Buyer is at the Buyer’s risk and without limitation the Lots are sold

subject to any claims, liens, distraint and execution and subject to all leasing, hire or hire purchase agreements and reservation of title claims (if any) in respect of

them;

8.3.2 if it shall be found that the Seller does not have title to all or any of the Lots the Buyer shall have no right to rescind, avoid or vary this agreement or to claim

damages or a reduction in the price paid or payable;

8.3.3 anything found in, under, near or in any Lot which is not specifically included in the description of the Lot remains the property of the Seller;

8.3.4 any intellectual property rights or software subsisting in a Lot may be third party property and as such the Seller and/or the Company may be unable to effect

transfer. The Buyer will not be authorised to use intellectual property rights or software and any such use or transfer shall be at the Buyers sole risk.

8.4 The Buyer undertakes that it shall ensure that any vehicle comprised in any Lot is in a roadworthy condition in accordance with the Road Vehicle (Construction and Use)

Regulations 1986 and any subsequent amendments thereof or such other relevant regulations as shall from time to time be in force before using it on a public road. It is

the Buyer’s responsibility to remove Company logos and lettering from vehicles. Odometer readings are not warranted.

8.5 The Buyer acknowledges that any item of plant, machinery or equipment contained in the Lot(s) may not necessarily comply with any statutory requirements or

regulations governing the use of that plant, machinery or equipment in their working environment. Neither the Seller nor the Company shall incur any liability to the

Buyer because of any default or defect in all or any of the Lots. Buyers are entirely responsible for ensuring that the use of any item of plant, machinery or equipment

does not contravene any health and safety and environmental legislation in existence at the time of the Sale.

8.6 The Buyer acknowledges and agrees that the Company is acting only as agent of the Seller and it is expressly agreed and declared that no personal liability in connection

with the Sale of any Lot or otherwise shall fall on the Company and the Buyer shall indemnify the Company against all and any liabilities arising under or in connection

with the Sale of any Lot. Insolvency Practitioner(s), including Administrative Receiver(s), Administrator(s) and Liquidator(s) act as agent(s) for the Seller without personal

liability and shall incur no personal liability whatsoever in relation to a Sale or pursuant to any document relating thereto.

8.7 The Buyer acknowledges and agrees that the Auctioneer does not represent any lot as being in a condition which makes it suitable for domestic use.

8.8 The Buyer acknowledges and agrees the Auctioneer does not have nor professes to have any expert or other knowledge of any Lots sold.

8.9 The Buyer acknowledges and agrees that the Auctioneer is hereby excluded from any liability the Auctioneer might otherwise incur.

8.10 The Buyer acknowledges and agrees that no liability shall attach to the Auctioneer either in contract or in tort for loss of injury or damage legal or otherwise sustained by

the Seller, any bidder, the Buyer or any other person by reason of any defect in any Lot sold, latent or otherwise, or any defect or danger of the premises where the

Auction is held.

8.11 The Buyer agrees that the General Conditions and the exclusions which they contain are fair and reasonable bearing in mind that:-

8.11.1 the Buyer must rely absolutely on the Buyer’s own opinion and/or professional advice concerning the quality, state, condition, performance and functionality of

the Lots any right, title or interest which is sold under the terms of these General Conditions, their fitness and suitability for any particular or any purpose, the

possibility that some or all of them may have defects not apparent on inspection and examination including, without limitation, the presence of contamination

and the possibility that the Buyer may not acquire title and the fact that the Buyer would have no remedy under this Agreement should that happen;

8.11.2 the Buyer has available to it skilled professional advice and on that basis agrees to purchase a Lot for a consideration calculated to take into account amongst

other things the risk to it represented by the fact that the parties believe that all the exclusions and limitations set out in these General Conditions would be

recognised as being fully effective by the Courts and the Seller making it clear that it would not have agreed to sell any Lot on any other basis except for a higher

consideration;

8.11.3 the Buyer has been given every opportunity which might reasonably be expected to examine and inspect the Lots.

8.12 Limitation of Liability - the buyer's attention is particularly drawn to this condition

8.13 The following provisions set out the entire liability of Seller and the Company (including any liability for the acts or omissions of their respective employees, agents and

sub-contractors) to the Buyer in respect of:

1.1. (a) any breach of these Conditions of Sale;

1.2. (b) any use made by the Buyer of any Lot (being any item) which forms part of any Sale; and

1.3. (c) any representation, statement or tortious act or omission including negligence arising under or in connection with these Conditions of Sale.

8.14 All warranties, conditions and other terms implied by statute or common law are, to the fullest extent permitted by law, excluded from these Conditions of Sale.

8.15 Nothing in these Conditions of Sale excludes or limits the liability of Company and the Seller:

1.4. (a) for death or personal injury caused by (as the case may be) the Company’s or the Seller's negligence;

1.5. (b) for any matter which it would be unlawful for the Company or the Seller to exclude or attempt to exclude its liability; or

1.6. (c) for fraud or fraudulent misrepresentation by (as the case may be) the Company or the Seller.

8.16 Company shall accept liability to the Buyer in respect of damage to the tangible property of the Buyer resulting from the negligence of Company or its agents or

sub�contractors up to a maximum amount of [INSERT] or each event or series of connected events.

8.17 The Buyer's attention is in particular drawn to the provisions of conditions 8.18 to 8.19.

8.18 Subject to conditions 8.13 – 8.15 (inclusive):

1.7. (a) the Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with

the performance or contemplated performance of these Conditions of Sale shall be limited to the aggregate amount of the price paid for the Lot or if no price has

been paid then the higher of the market value or reserve price for the Lot; and

1.8. (b) the Company shall not be liable to the Buyer for any (i) pure economic loss, (ii) loss of profit, (iii) anticipated savings, (iv) loss of business (v) depletion of goodwill or (vi)

similar loss in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or

in connection with these Conditions of Sale.

8.19 Subject to conditions 8.13 – 8.15 (inclusive):

1.9. (a) the Seller’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the

performance or contemplated performance of these Conditions of Sale shall be limited to the aggregate amount of the price paid for the Lot or if no price has been

paid then the higher of the market value or reserve price for the Lot; and

1.10. (b) the Seller shall not be liable to the Buyer for any (i) pure economic loss, (ii) loss of profit, (iii) anticipated savings, (iv) loss of business (v) depletion of goodwill or (vi)

similar loss in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or

in connection with these Conditions of Sale.

8.20 The Buyer acknowledges that the limitations of liability in these Conditions of Sale and in particular this clause 8 are fair and reasonable given the price paid for the

services supplied by the Company and the Seller to the Buyer under these Conditions of Sale, the liability commonly accepted by businesses carrying on the same

business as the Company (including the Company’s contractors), and the availability and price of insurance available to the Company in respect of the services. If the

liability limits in this clause 8 are not sufficient for the Buyer then the Buyer should enquire if for an additional fee the Company is able to offer a higher level of

liability. Where this is agreed to by the Company then additional terms may apply as notified to the Buyer by the Company.

8.21 The Buyer acknowledges that a Sale by Auction is not a consumer sale for the purposes of the Sale of Goods Act 1979 (as amended by the Sale and Supply of Goods Act

1994) and the Unfair Contract Terms Act 1977 and the Buyer shall not seek to rely upon and conditions or warranties implied thereby or by any other legislation.

9 Entire agreement

The parties agree that these General Conditions, the Special Conditions and the Catalogue constitute the entire agreement between them and supersedes all previous

drafts agreements arrangements and understandings between them, whether oral or written.

10 Jurisdiction

Each party irrevocably agrees that the courts of England and Wales shall have exclusive jurisdiction to settle any dispute or claim arising out of or in connection with

these General Conditions or its subject matter or formation (including non-contractual disputes or claim).

1

SPECIAL CONDITIONS OF SALE

Seller:

On the Instructions of the Administrators of Joseph Rhodes Limited and Slater and Crabtree Limited

Location:

Joseph Rhodes Limited, Elm Tree Street, Wakefield, WF1 5EQ and Slater and Crabtree Limited, Thornes Lane, Wakefield, WF1 5RW

Map:

Timed Online Auction Sale:

Viewing Day: Tuesday 14th November 2017 between 9:30am and 4:00pm Online Bidding Closes: Wednesday 15th November 2017 at xxx (Subject to 3 minute rule)

Viewing:

Tuesday 14th November 2017 Access to the Locations are allowed on the understanding that viewers attend the Location entirely at their own risk and are responsible for and will indemnify the Seller and the Company against any losses damage or claims occasioned by their presence at the Location. Children under the age of 16 will not be allowed access to the Locations.

Registrations:

All bidders must register their name and address with the Company.

Overseas Buyers: When registering overseas buyers must also provide:-

• Passport details;

• other confirmation of their identity and address, eg drivers licence;

• full bank details.

VAT: VAT will be charged at the current rate of 20% and will be added to all auction bids.

Buyers Premium: The buyer will pay to the auctioneer a premium of 15% on the “hammer price” to which will be added Value Added Tax at the current rate. The premium is not negotiable and is payable by all buyers. The auctioneer, when acting as agent for the seller, may also receive commission from the seller.

2

Payment: All monies must be paid in accordance with the terms and conditions. Lots may only be collected upon receipt of cleared funds: Telegraphic Transfer - Bank details for telegraphic transfer: Account: Richmond Advisory Limited Bank: Barclays Bank Plc, Albion Street, Leeds Sort Code: 20-48-42 Account Number: 50569615 Cash - In view of Money Laundering Regulations the Company reserves the right to refuse payment in cash. Payments in cash of more than £7000 will not, in any circumstances, be accepted. Bankers Draft : made payable to Richmond Advisory Limited Cheques: cheques will only be accepted on the basis that seven working days are required for cleared funds before any Lots are removed. Cheques over the limit of a cheque guarantee card will only be accepted for immediate clearance of Lots if they are supported by a banker’s reference. Banker’s references: Banker’s references are only acceptable if they are original top copies correctly dated and addressed to Richmond Advisory Limited referring specifically to the sale in question and the Buyer and are in the form specified or previously approved by the Company.

Special Notes and Requirements: - All payments are to be sent by CHAPS transfer by no later than

Friday 17th November 2017. - Removal will be strictly on an appointment basis and removal must

be completed no later than 4pm on Friday 22nd December 2017. - It is the purchasers responsibility to ensure he/she has the required

transport and packaging in order to undertake clearance of lots efficiently and adequately in accordance with the Auctioneers requirements.

3

EXAMPLE OF ACCEPTABLE BANK REFERENCE

BANK LETTERHEAD

CUSTOMERS ADDRESS

Dear Sir/Madam REF: (INSERT NAME OF TENDER SALE) This letter is to confirm that our above customer can issue a cheque up to the amount of £ (insert amount), and that it will be honored by the bank. Yours faithfully (print name _____________________)

Deposits: The Company reserves the right to request a deposit to be paid.

Clearance: All stock lots must be cleared without fail no later than 22nd December 2017 by

4pm. Clearance of all lots must be undertaken in accordance with current Health & Safety at Work Regulations and Construction Design & Management Regulations. The Buyer may have to provide a “method statement” and/or “risk assessment” approved by the Company prior to the removal of any lots. The Company reserve the right to halt clearance if it is being carried out in an unsafe manner or without an approved “method statement” and/or “risk assessment”. Electrical disconnections from the mains supply are the responsibility of the Buyer and MUST be carried out by an approved electrician. Any fluids and/or waste remaining in plant and machinery are the responsibility of the Buyer and MUST be removed from the Location strictly in accordance with Control of Substances Hazardous to Health Regulations.

Reserve Removal:

Lots sold subject to a reserve removal will either be indicated in the catalogue with the date of availability or will be identified by the Auctioneer at the point of sale. A 25% deposit will be required as with other lots but in this instance payment in full can be left until 5 working days prior to availability. Unless specified to the contrary such lots must be removed from site not later than the date and time specified for final removal in these Special Conditions of Sale.

4

Acceptance of Bids:

Acceptance of all final highest bids is subject to approval by our client. Richmond Advisory Limited reserves the right to reject any bids which they feel does not reflect reasonable value.

Deposits: Purchasers are required to pay a deposit on lots which will cause damage or leave a hole in the fabric of the building after removal. These lots will be specified in the sale catalogue. The deposit will be returned once the purchaser has made good in a satisfactory manner.

Risk:

The Bidder is on risk once the offers are accepted and is strongly advised to effect insurance at once.

Transfer of Lots: The Company will only accept payment from and permit removal of Lots purchased by the Buyer or its agents.

Value Added Tax:

Purchasers will be charged Value Added Tax at the current rates on the amount of their purchases.

Furniture and Furnishings:

All Lots are sold on the understanding that the Seller does not represent them as being in a condition which makes them suitable for domestic use. The Buyer is reminded that if any Lots are intended for domestic use the Buyer must ensure that they comply with the requirements of the Furniture & Furnishings (Fire Safety) Regulations.

Conditions of Sale:

The attention of Buyers is drawn to the General Conditions of Sale included in the Online Auction Specification. At the end of the online sale final bid figures will be submitted to our clients for approval. Any lots may be subject to a reserve price. All lots shall be paid immediately on receipt of invoices and shall be at the purchasers risk from the date of invoice. Clearance to be arranged on an appointment basis through the Agents Richmond Advisory Limited. Please see the Specific and General terms of sale for clarification on any issues

Recorded “Useage” Readings:

The hour and odometer readings on machinery and vehicles in this sale cannot be warranted and should not be relied upon.

Software:

Title to computer Software is not transferred and use is subject to any licence or copyright restrictions and user conditions. The Vendors/Agents/Auctioneers reserve the right to erase any private or sensitive information prior to delivery or at any later date.

Pipework:

Disconnect as marked or as directed.

Electric Cable:

Electric cable and pallets are not included with the sale of any lots unless otherwise indicated. All electric motors and machinery must be disconnected from the machine side of the isolator switch which must be left with the buildings.

Racks & Benches:

All racks and benches are subject to reserve removal until the contents have been cleared.

5

Fire Alarm:

In case of a fire alarm all visitors and contractors are to exit buildings and report to the Muster Point.

Smoking:

No smoking on site. Food and Drink is only to be consumed in designated areas.

Safety:

All visitors and contractors are reminded that they are responsible for their own safety on site and enter at their own risk and should take the precaution of wearing protective clothing as appropriate.

HSE:

Health & Safety Legislation and Construction, Design and Management Regulations 1994. Purchasers should be aware of the above and comply as appropriate. It is also important that all purchasers/contractors comply with site rules, site procedures and Health & Safety Regulations. Unless specifically excluded purchasers of lots will be required to make good holes or voids exposed by the removal of lots. Cladding taken off buildings for removal of plant & equipment will have to be replaced, unless otherwise specified by the Auctioneer.

Special Notes and Requirements: - All payments are to be sent by CHAPS transfer by no later than

Friday 17th November 2017. - Removal will be strictly on an appointment basis and removal must

be completed no later than 4pm on Friday 22nd December 2017. - It is the purchasers responsibility to ensure he/she has the required

transport and packaging in order to undertake clearance of lots efficiently and adequately in accordance with the Auctioneers requirements.

6

NOTICE TO PURCHASERS

Purchase of Goods using a Finance Company:

If Buyers wish to purchase goods with the help of a finance company they should make arrangements well in advance of the Sale to ensure that they are able to make payment in accordance with the conditions of sale.

Overseas Buyers:

Overseas Buyers should ensure that the country to which the items are destined:-

• holds no import restrictions on the goods to be purchased;

• has no import license restrictions or a restriction on currency allocation;

• has no prolonged inspection procedure which might cause excess delay in allowing your goods to be imported.

Overseas Buyers will receive a fully descriptive invoice in order that they may arrange payment as soon as possible with the Sellers bank, Barclays Bank plc, Albion Street, Leeds LS1. Overseas Buyers should employ a suitable freight forwarding organisation. Please note that many of the machinery removal companies in this country are not necessarily freight forwarders. The Seller will be pleased to advise accordingly. Overseas Buyers should read the conditions of Sale.

Please Note:- (a) The Seller cannot allow removal of any Lot from the Auction Sale until their

Accounts Department has received notification from their banker that the Buyer’s payment has been properly cleared in full. Monies must be transferred to the Seller within the time state in the “Conditions of Sale” on the following page.

(b) If there are any special arrangements that the Buyer wishes to make with the

Seller, the Buyer must contact the Seller at least three days before the Sale date.

VAT Payments and Returns:

All overseas Buyers (EU and non EU) will be charged VAT at the current rate on each Lot purchased. This will be refunded to the overseas Buyer as soon as the Seller receives a copy of the bill of lading as proof of export, providing this documentation is received within 3 months of the sale date. The Seller is unable to refund the VAT on the Buyer’s Premium to non EU countries.

7

Lot No. Description

1

Bridgeport VMC 1500/22 high speed horizontal machining centre with Heidenhain DRO with Swarfe

conveyor bed 650 x 1400mm, throw 260mm - Please note this equipment must be fully tested in

accordance with the appropriate Regulations/LOLER Regulations prior to being put into use. The

Purchaser will be required to sign an undertaking prior to the removal from site confirming their

agreement to ensure this item is tested and certified in accordance with Regulations prior to being put

into use - Lot located at Slater and Crabtree site

2

Takisawa EX-122 horizontal machining centre with Fanuc 21i-TB Series control, 10 station tool turret

Swarfe conveyor 1800mm length between centres, throw 210mm, Serial No. CF06E20009, Date of

manufacture 2005 - Please note this equipment must be fully tested in accordance with the

appropriate Regulations/LOLER Regulations prior to being put into use. The Purchaser will be required

to sign an undertaking prior to the removal from site confirming their agreement to ensure this item is

tested and certified in accordance with Regulations prior to being put into use - Lot located at Slater

and Crabtree site

3

Mori Seiki SL35B horizontal CNC machining centre with Fanuc 10T controller, 10 station tool turret, May

Fran Swarfe conveyor and bin 850mm between centres, throw 160mm, Serial No. 28, Date of

manufacture August 1988 - “Please note: This equipment must be fully tested in accordance with the

appropriate regulations / LOLER regulations prior to being put into use. The purchaser will be required


tested & certified in accordance with Regulations prior to it being put into use.” - Located at Slater and

Crabtree site

4

Mori Seiki SL25-B5 horizontal CNC machining centre with Fanuc 10T controller, 10 station tool turret,

May Fran Swarfe conveyor and bin 515mm between centres, throw 110mm with collect chuck, Serial

No. 404 - “Please note: This equipment must be fully tested in accordance with the appropriate

regulations / LOLER regulations prior to being put into use. The purchaser will be required to sign an

undertaking prior to the removal from site confirming their agreement to ensure this item is tested &

certified in accordance with Regulations prior to it being put into use.” - Located at Slater and Crabtree

site

5

Toshulin SKI Q20 Cross Rail vertical CNC boring mill with GE Fanuc OT series controller, 2000mm rotary

table, 15 station tool turret - Please note this equipment must be fully tested in accordance with the



tested and certified in accordance with Regulations prior to being put into use. - Located at Slater and

Crabtree site

6

Hankook VTC85R vertical CNC machining centre with Fanuc 21i-TB controller, 950mm rotary table with

12 station tool turret, max work height 700mm - Please note this equipment must be fully tested in




into use. - Located at Slater and Crabtree site

7

Webster Bennett cross rail 48 inch vertical borer with five station tool holder and Heidenhain DRO -

Please note this equipment must be fully tested in accordance with the appropriate Regulations/LOLER

Regulations prior to being put into use. The Purchaser will be required to sign an undertaking prior to

the removal from site confirming their agreement to ensure this item is tested and certified in

accordance with Regulations prior to being put into use - Lot located at Slater and Crabtree site

8

Mandelli twin table machining centre, 800mm tables with CNM Plasma controller MOD P60863, Serial

No. 7207/07006150 over concept head, 41 station tool holders - Please note this equipment must be

fully tested in accordance with the appropriate Regulations/LOLER Regulations prior to being put into

use. The Purchaser will be required to sign an undertaking prior to the removal from site confirming

their agreement to ensure this item is tested and certified in accordance with Regulations prior to being

put into use - Lot located at Slater and Crabtree site

9 Mandelli twin table machining centre with 800mm tables over concept head unit, 41 station tool

8

holders with CNM Plasma controller, MOD 1221, Serial No. 7304/07006300 - Please note this

equipment must be fully tested in accordance with the appropriate Regulations/LOLER Regulations

prior to being put into use. The Purchaser will be required to sign an undertaking prior to the removal

from site confirming their agreement to ensure this item is tested and certified in accordance with

Regulations prior to being put into use - Lot located at Slater and Crabtree site

10

Dixi type 75 ON Usine II horizontal jig borer with vertical travelling head, Heidenhain DRO table size 34

inch x 27.25 inch, max height 22.5 inch - Please note this equipment must be fully tested in accordance

with the appropriate Regulations/LOLER Regulations prior to being put into use. The Purchaser will be

required to sign an undertaking prior to the removal from site confirming their agreement to ensure

this item is tested and certified in accordance with Regulations prior to being put into use - Lot located

at Slater and Crabtree site

11

Bohner and Kohle Boko WF3/12 CNC Milling Machine with Heidenhain controller 1460 x 1060mm Bed,

max head height 980mm with spare horizontal head - Please note this equipment must be fully tested

in accordance with the appropriate Regulations/LOLER Regulations prior to being put into use. The




12

Bohner and Kohle Boko F30 CNC Milling Machine with Heidenhain controller 1460 x 1060mm bed with

horizontal head unit fitted - Please note this equipment must be fully tested in accordance with the




and Crabtree site

13

Bohner and Kohle Boko WF2/10 CNC Milling Machine with Heidenhain TNC 145 controller 1365 x

870mm Bed, max height 700mm with spare horizontal head unit - Please note this equipment must be




put into use. - Located at Slater and Crabtree site

14

Bohner and Kohle Boko WF1/6 CNC Milling Machine with Heidenhain TNC150 controller 890 x 520mm

bed, max height 590mm and spare hoizontal head unit - Please note this equipment must be fully

tested in accordance with the appropriate Regulations/LOLER Regulations prior to being put into use.

The Purchaser will be required to sign an undertaking prior to the removal from site confirming their



15

Bohner and Kohle Boko WF3/12 CNC Milling Machine with Heidenhain DRO 1660 x 1060mm bed max

head height 1000mm - Please note this equipment must be fully tested in accordance with the




and Crabtree site

16

SIP Hydraoptic 6A vertical jig boaring machine with Heidenhain DRO 1100 x 840mm bed, 630mm max

head height, Refurb 1980, Serial No. 4410 - Please note this equipment must be fully tested in





17

SIP Hydraoptic 6A vertical jig boaring machine with Heidenhain DRO 1100 x 840mm bed, 630mm max

head height, Refurb 1980, Serial No. 4006 - Please note this equipment must be fully tested in




9


18

Bridgeport Series I Milling Machine with Heidenhain DRO - Please note this equipment must be fully





20

Dean Smith and Grace Type 1910 x 40 gap bed lathe with 24 inch four jaw chuck and Heidenhain DRO

15 inch throw, Serial No. 41643-10-81 - Please note this equipment must be fully tested in accordance

with the appropriate Regulations/LOLER Regulations prior to being put into use. The Purchaser will be




21

Dean Smith and Grace Type 17 gap bed lathe with 15 3/4 inch 3 jaw chuck and Heidenhain DRO 15 inch

throw, Serial No. 35169/12/63 - Please note this equipment must be fully tested in accordance with the




and Crabtree site

22

Ward 3DB Capstan lathe with six station tool holder, collect chuck and cupboard of spare tooling NVN -





23

Lumsden cylindrical grinder with 4ft round magnetic table and 30 inch grinding head, Serial No.

92ML/78/11577 - Please note this equipment must be fully tested in accordance with the appropriate

Regulations/LOLER Regulations prior to being put into use. The Purchaser will be required to sign an

undertaking prior to the removal from site confirming their agreement to ensure this item is tested and

certified in accordance with Regulations prior to being put into use - Lot located at Slater and Crabtree

site

24

Kent KGS-816AHD surface grinder with twin Kanetsa magnetic chucks 1600 x 810mm and Sony LH51

DRO, Serial No. 8907 90-1, Date of manufacture 08/1990 - Please note this equipment must be fully





25

Jones and Shipman 540P Surface Grinder with 355 x 150mm chuck and cupboard of spare tooling -





27

Kitchen and Walker E3 radial arm drill with 48 x 36 inch table, Serial No. 3246, Date of manufacture

1980 - Please note this equipment must be fully tested in accordance with the appropriate




site

28

Kitchen and Walker E3 radial arm drill with 48 x 36 inch table, Serial No. 2899, Date of manufacture

1978 - Please note this equipment must be fully tested in accordance with the appropriate




site

10

29

Start-Rite 316H vertical bandsaw, throat site 16 inch x 36 inch - Please note this equipment must be





30

Start-Rite H330M horizontal bandsaw 600 x 340 with throat spares (situated in yard) - Please note this





36

2 - Tapping heads, 1 - Tapmatic SM8 and 1 - EILZ with Arbors - Please note this equipment must be fully





37

3 - Milling machine tools, 2 - Surface grinding and 1 - Internal bore cutter with Arbors - Please note this





38

2 - Milling machine tools for surface grinding - Please note this equipment must be fully tested in





39

Madinson double tool bore cutter 150-225mm - Please note this equipment must be fully tested in





40

Sandvik double tool bore cutter 125 - 150mm - Please note this equipment must be fully tested in





41

Single tool borecutter 95 - 140mm - Please note this equipment must be fully tested in accordance with

the appropriate Regulations/LOLER Regulations prior to being put into use. The Purchaser will be




42

Sandvik double tool bore cutter 300 - 375mm - Please note this equipment must be fully tested in





43

10 - Assorted tool holders and Arbors, some with tooling to include cutters, rippers and drills etc -





44

8 - Assorted tool holders some with tools to include drills, rippers etc - Please note this equipment must

be fully tested in accordance with the appropriate Regulations/LOLER Regulations prior to being put

11

into use. The Purchaser will be required to sign an undertaking prior to the removal from site

confirming their agreement to ensure this item is tested and certified in accordance with Regulations

prior to being put into use - Lot located at Slater and Crabtree site

45

8 - Tool holders and Arbors with tools to include drills, rippers etc - Please note this equipment must be





46

8 - Tool holders with tools to include drills etc - Please note this equipment must be fully tested in





47

8 - Tool holders some with tools to include rippers etc - Please note this equipment must be fully tested





48

8 - Tool holders with tools to include cutters, drills etc - Please note this equipment must be fully tested





49

17 - Tool holders some with tools to include cutters, drills etc - Please note this equipment must be





50

2 - Societe Genevoise R4E 5 1/2 - 12 inch boring heads plus one Wohlhadpter borecutter Lot located at

Slater and Crabtree site

51 3 - Societe Genevoise F4e 4 3/8 - 9 inch boring heads - Lot located at Slater and Crabtree site

52 3 - Societe Genevoise 3 3/8 - 6 1/4 inch boring heads - Lot located at Slater and Crabtree site

53 3 - Societe Genevoise 2 3/8 - 5 boring heads - Lot located at Slater and Crabtree site

54 3 - Societe Genevoise tool holder with various tooling - Lot located at Slater and Crabtree site

55 Societe Genevoise boring head 59mm min diameter - Lot located at Slater and Crabtree site

56

Quantity of associated machine tooling to include boring bars etc - Lot located at Slater and Crabtree

site

57 22 - Pieces of machine tools and holders - Lot located at Slater and Crabtree site

58 9 - Tool holders by Clarkson and Autolock some with tooling - Lot located at Slater and Crabtree site

59 12 - Associated tool holders, some with tooling - Lot located at Slater and Crabtree site

60 4 - Associated tool chucks - Lot located at Slater and Crabtree site

61 5 - Societe Genevoise boring heads - Lot located at Slater and Crabtree site

62 6 - Societe Genevoise tool holders - Lot located at Slater and Crabtree site

63 8 - Societe Genevoise imperial boring tools - Lot located at Slater and Crabtree site

64 6 - Various tool holders - Lot located at Slater and Crabtree site

65

7 - Associated Societe Genevoise RL4 tool holders plus two others - Lot located at Slater and Crabtree

site

66 4 - Various milling tools and four spare cutters - Lot located at Slater and Crabtree site

67

Quantity of various machine tools to include taper shank drills, taps and reamers - Lot located at Slater

and Crabtree site

12

68

22 - Associated machine tools to include drills, rippers and tool holders - Lot located at Slater and

Crabtree site

69

2 - Societe Genevoise "L" type boring tool sets incomplete and one other incomplete set of tooling - Lot

located at Slater and Crabtree site

70 Quantity of tool extensions - Lot located at Slater and Crabtree site

71 Quantity of tool holders, tools and extensions - Lot located at Slater and Crabtree site

72 Quantity of various sized tool holders and extensions - Lot located at Slater and Crabtree site






78 15 - Various tool holders, some with tooling - Lot located at Slater and Crabtree site

79 Quantity of tap holders and adaptors - Lot located at Slater and Crabtree site





84 17 - Various tool holders with tooling - Lot located at Slater and Crabtree site















99 Tool holder with drill - Lot located at Slater and Crabtree site

100 Madinson 125 - 150mm boring tool - Lot located at Slater and Crabtree site

101 Walter Face Milling Cutter, 125mm - Lot located at Slater and Crabtree site

102 Kyocera Face Milling Cutter, 160mm - Lot located at Slater and Crabtree site

103 Sandvik Coromant Face Milling Cutter, 160mm - Lot located at Slater and Crabtree site

104 Fine boring tool, max size 325mm - Lot located at Slater and Crabtree site

105 Madinson boring tool, 100 - 105mm - Lot located at Slater and Crabtree site

106 Societe Genevoise fine boring tool, 2 - 2 7/8 inch - Lot located at Slater and Crabtree site

107 Sandvik Coromant adjustable fine boring tool - Lot located at Slater and Crabtree site

108 Madinson fine boring tool, 65-80mm - Lot located at Slater and Crabtree site

109 Sandvik Coromant Face Milling tool, 160mm - Lot located at Slater and Crabtree site

110 Madinson boring tool, 100 - 105mm - Lot located at Slater and Crabtree site

111 150mm ripping tool - Lot located at Slater and Crabtree site

13

112 2 - Surface milling tools - Lot located at Slater and Crabtree site

113 2 - Surface milling tools - Lot located at Slater and Crabtree site

114 10 - Tool holders some with tools - Lot located at Slater and Crabtree site

115 2 - Tool holders - Lot located at Slater and Crabtree site

116 2 - Tool holders with tooling - Lot located at Slater and Crabtree site




120 2 - Tool Holders - Lot located at Slater and Crabtree site


122 2 - Tool Holders with tooling - Lot located at Slater and Crabtree site







129 2 - Tool Holders with tooling - Lot located at Slater and Crabtree site




























14





















180 Large quantity of long and short imperial end mills - Lot located at Slater and Crabtree site

181 Large quantity of long and short imperial slot drills - Lot located at Slater and Crabtree site

182

Large quantity of long and short imperial rippers and metric bull nose cutters - Lot located at Slater and

Crabtree site

183

Large quantity of imperial bull nose cutters and woodruff cutters - Lot located at Slater and Crabtree

site

184

Large quantity of dovetail and corner rounding cutters with extra long imperial rippers - Lot located at


185 Large quantity of long and short imperial drills - Lot located at Slater and Crabtree site

186 Large quantity of long and short imperial end mills - Lot located at Slater and Crabtree site

187

Large quantity of imperial extensions, end mills and deadlock end mills - Lot located at Slater and

Crabtree site

188 Large quantity of imperial and metric radius cutters - Lot located at Slater and Crabtree site

189 Large quantity of imperial milling cutters - Lot located at Slater and Crabtree site

190 Large quantity of imperial milling cutters - Lot located at Slater and Crabtree site

191

Large quantity of hand tools to include files, spanners, torqs, drivers etc - Lot located at Slater and

Crabtree site

192 Large quantity of various collets - Lot located at Slater and Crabtree site

193 Quantity of tool stops etc - Lot located at Slater and Crabtree site

194 Contents of drawer containing various CO cutters - Lot located at Slater and Crabtree site

195 Contents of drawer containing assorted sized metric reamers - Lot located at Slater and Crabtree site

196 Contents of drawer containing assorted sized imperial reamers - Lot located at Slater and Crabtree site

197

Contents of drawer containing bull nose cutters, slot drills, end drills etc - Lot located at Slater and

Crabtree site

198 Contents of drawer containing imperial slot drills - Lot located at Slater and Crabtree site

199

Contents of drawer containing imperial end mills, coromill T slot drills - Lot located at Slater and

Crabtree site

15

200

Contents of drawer containing various metric drill bits and cutting tips - Lot located at Slater and

Crabtree site

201

Quantity of various imperial and metric tapperd shank milling cuffer - Lot located at Slater and Crabtree

site

202 Madinson boring heads, 1 x 150-225 and 1 x 125 - 150mm - Lot located at Slater and Crabtree site

203 Madinson boring heads, 1 x 125-150 and 1 x 80 - 100mm - Lot located at Slater and Crabtree site

204 Madinson boring heads, 1 x 80-100 and 1 x 65-80mm - Lot located at Slater and Crabtree site

205 2 - Madinson boring heads, 100-125mm - Lot located at Slater and Crabtree site

206

4 - Madinson boring heads, 1 x 50-65, 2 x 65-80, 1 x 80-100mm and 1 x 125-150mm - Lot located at


207 Milling cutter and Sandvik Coromant boring tool, 53-67mm - Lot located at Slater and Crabtree site

208 4 - Assorted boring heads - Lot located at Slater and Crabtree site

209 3 - Madinson boring heads - Lot located at Slater and Crabtree site

210 Large quantity of various tool holders - Lot located at Slater and Crabtree site

211 4 - Tool holding chucks - Lot located at Slater and Crabtree site

212 5 - Tool holding chucks - Lot located at Slater and Crabtree site

213 Quantity of various cutting and drilling tools - Lot located at Slater and Crabtree site

214 Quantity of various drills - Lot located at Slater and Crabtree site

215 Quantity of various drills, cutters and reamers - Lot located at Slater and Crabtree site

216 Quantity of various milling cutters - Lot located at Slater and Crabtree site

217

New Lamina Technologies LT902 S-W-D0321 End milling tool with four pack of spare cutters - Lot


218 2 - New 32mm end milling tools - Lot located at Slater and Crabtree site

219 2 - New 50mm end milling tools - Lot located at Slater and Crabtree site

220 2 - New tool holders by Sandvik Coromant and Walter - Lot located at Slater and Crabtree site

221 Quantity of tools to include end mills, taps etc - Lot located at Slater and Crabtree site

222

5 - Small lin bins of assorted cutting inserts by Sandvik Coromant, ATI Stellram, Kenna Metal etc - Lot


223

5 - Small lin bins and two boxes of assorted cutting inserts by Walter, Sandvik Coromant, Seco etc - Lot


224 3 - Boxes of flat bottom slot drills - Lot located at Slater and Crabtree site

225 Quantity of imperial flat bottom slot drills - Lot located at Slater and Crabtree site

226 Quantity of Clarke and Autolock tool holders - Lot located at Slater and Crabtree site

227 Quantity of Tapper Shank drill bits - Lot located at Slater and Crabtree site

228 Quantity of Carbide slot drills and end mills - Lot located at Slater and Crabtree site

229 Quantity of imperial bull nose bits - Lot located at Slater and Crabtree site

230 Quantity of metric bull nose bits - Lot located at Slater and Crabtree site

231 Quantity of various metric taps up to M20 - Lot located at Slater and Crabtree site

232 Quantity of various NPT, BSW, BSF and BA taps - Lot located at Slater and Crabtree site

233 Quantity of various UNC taps - Lot located at Slater and Crabtree site

234 Quantity of various metric and imperial rippers - Lot located at Slater and Crabtree site

235 Quantity of various slot drills etc - Lot located at Slater and Crabtree site

236 Quantity of various imperial end mills - Lot located at Slater and Crabtree site

237 Contents of drawer containing metric rippers - Lot located at Slater and Crabtree site

238 Contents of drawer containing metric end mills - Lot located at Slater and Crabtree site

239 Contents of drawer containing metric slot drills - Lot located at Slater and Crabtree site

241 Record No 25 engineers vice - Lot located at Slater and Crabtree site

16

242 2 - Bench mounted tooling assembly vices - Lot located at Slater and Crabtree site

243 Bench mounted tooling assembly vice - Lot located at Slater and Crabtree site

244 Bench mounted tooling assembly vice - Lot located at Slater and Crabtree site

245 2 - Bench mounted tooling assembly vices - Lot located at Slater and Crabtree site

246 6 - Various tooling Arbors - Lot located at Slater and Crabtree site


248 4 - Various large milling cutters - Lot located at Slater and Crabtree site

249 Quantity of various tooling parts many for Mandelli machines - Lot located at Slater and Crabtree site

250 Quantity of tooling, extension bars and tool holders - Lot located at Slater and Crabtree site

251 4 - Tool holders, one with milling cutter - Lot located at Slater and Crabtree site

252 Quantity of various imperial boring drills - Lot located at Slater and Crabtree site

253 Quantity of various metric boring drills - Lot located at Slater and Crabtree site

254

Parlec Series 1500 Parsetter tool measuring machine with bench - No Software - Lot located at Slater

and Crabtree site

255

Boremasters Tiplap carbide tool lapping machine - Please note this equipment must be fully tested in





256

James Archdale tool sharpening machine, Serial No. D.6.661 - Please note this equipment must be fully





260 Contents of shelf unit to include Arbors, tool holders and tools - Lot located at Slater and Crabtree site

261 Quantity of various welding rods - Lot located at Slater and Crabtree site

262 14 - Boxes containing various sized taps - Lot located at Slater and Crabtree site

263 14 - Boxes containing various size metric taps - Lot located at Slater and Crabtree site

264 15 - Boxes containing various UNF taps - Lot located at Slater and Crabtree site

265 15 - Boxes containing various UNC taps - Lot located at Slater and Crabtree site

266 15 - Boxes containing various UNC taps - Lot located at Slater and Crabtree site

267 12 - Boxes containing various BSP taps - Lot located at Slater and Crabtree site

268

15 - Boxes containing various BA, BSF, NPT, NPTF, BSPT and UNJF taps - Lot located at Slater and

Crabtree site

269 18 - Boxes containing various BSW taps - Lot located at Slater and Crabtree site

270 4 - Boxes of various 'O' rings and springs - Lot located at Slater and Crabtree site

271 7 - Boxes of various sized drill bits, 1-1.7mm - Lot located at Slater and Crabtree site


273 6 - Boxes of various sized drill bits, 2.6-2.5mm - Lot located at Slater and Crabtree site


275 7 - Boxes of various sized drill bits, 4.1-4.9mm - Lot located at Slater and Crabtree site





280 7 - Boxes of various sized drill bits, 9-10mm - Lot located at Slater and Crabtree site

281 24 - Boxes of various sized imperial drill bits - Lot located at Slater and Crabtree site

17

283 6 - Various sized imperial drill bits - Lot located at Slater and Crabtree site

284 11 - Various sized metric drill bits - Lot located at Slater and Crabtree site



287 4 - Various milling cutters - Lot located at Slater and Crabtree site





292 2 - Milling cutters - Lot located at Slater and Crabtree site

293 2 - Milling cutters - Lot located at Slater and Crabtree site


295 Sandvik Coromant 125mm milling cutter - Lot located at Slater and Crabtree site





300 Tub containing various rippers, end mills etc - Lot located at Slater and Crabtree site





305 9 - Fine boring cutters - Lot located at Slater and Crabtree site

306

9 - Various bull nose milling cutters and 6 - 12mm bull nose cutters - Lot located at Slater and Crabtree

site

307

6 - Various milling cutters to include bull nose and multi angle cutters - Lot located at Slater and

Crabtree site






313 Quantity of various metric and imperial collets - Lot located at Slater and Crabtree site

314 Quantity of various metric and imperial tool stops - Lot located at Slater and Crabtree site

315

6 - Bins of various imperial tapered shank drill bits, 33/64 to 19/32 - Lot located at Slater and Crabtree

site

316


site

317


site

318 6 - Bins of various tapered shank drill bits, 51/64 to 7/8 - Lot located at Slater and Crabtree site

319


site

320

6 - Bins of various imperial tapered shank drill bits, 63/64 to 1 1/8 - Lot located at Slater and Crabtree

site

321

11 - Bins of various imperial tapered shank drill bits, 1 5/32 to 1 5/8 - Lot located at Slater and Crabtree

site

18

322

11 - Bins of various imperial tapered shank drill bits, 1 3/4 to 3 inch - Lot located at Slater and Crabtree

site

323 14 - Lin Bins of various milling cutters - Lot located at Slater and Crabtree site

324 3 - Lin Bins and 3 - Boxes of various milling tool accessories - Lot located at Slater and Crabtree site

325

Quantity of items to include two IMP micrometers, end mills, tapered shank reamers etc - Lot located


326 Quantity of items to include bull nose 12mm drill end mills etc - Lot located at Slater and Crabtree site

327 5 - Boxes of various extension bars - Lot located at Slater and Crabtree site

328 5 - Boxes of various equal angle cutters - Lot located at Slater and Crabtree site

329 5 - Boxes of Dovetail cutters - Lot located at Slater and Crabtree site

330

Contents of drawer to include inserts by Sandvik, Coromant and Maydown - Lot located at Slater and

Crabtree site

331

Contents of drawer to include inserts by Sandvik, Coromant, Walter etc - Lot located at Slater and

Crabtree site

332

Contents of drawer to include inserts by Sandvik, Coromant and Fette - Lot located at Slater and

Crabtree site

333

Contents of drawer to include inserts by Sandvik, Coromant, Mitsubishi, Ingersoll etc - Lot located at


334

Contents of drawer to include inserts by Sandvik, Coromant, Walter, ATI etc - Lot located at Slater and

Crabtree site

335

Contents of drawer to include inserts by Sandvik, Coromant, Walter, Maydown etc - Lot located at


336 Contents of drawer to include inserts by Sandvik and Coromant - Lot located at Slater and Crabtree site

337 Contents of drawer to include inserts by Kyocera - Lot located at Slater and Crabtree site

338 Contents of drawer to include UNF and BA dies - Lot located at Slater and Crabtree site

339 Contents of drawer to include BSW dies - Lot located at Slater and Crabtree site

340 Contents of drawer to include UNC dies - Lot located at Slater and Crabtree site

341 Contents of drawer to include BSP and NPT dies - Lot located at Slater and Crabtree site

342 Contents of drawer to include BSF dies - Lot located at Slater and Crabtree site

343 Contents of drawer to include metric dies - Lot located at Slater and Crabtree site

344 Contents of drawer to include die stocks - Lot located at Slater and Crabtree site

345 Contents of box to include various inserts - Lot located at Slater and Crabtree site

346 Quantity of various drills, end mills, taps etc - Lot located at Slater and Crabtree site

347 2 - Lin Bins of various long drill bits, 0-15mm - Lot located at Slater and Crabtree site

348 2 - Lin Bins of various long drill bits, 15+mm - Lot located at Slater and Crabtree site

349 2 - Lin Bins of various imperial long drill bits - Lot located at Slater and Crabtree site

350 2 - Lin Bins of various imperial long drill bits - Lot located at Slater and Crabtree site

351 Contents of shelf 26 boxes of assorted tooling - Lot located at Slater and Crabtree site



354 Contents of cupboard to include long drills, milling cutters etc - Lot located at Slater and Crabtree site

355 16 - Lin Bins of various UNF taps - Lot located at Slater and Crabtree site

356 18 - Lin Bins of various BSW taps - Lot located at Slater and Crabtree site

357 23 - Lin Bins of various UNC taps - Lot located at Slater and Crabtree site

358 6 - Lin Bins of various BS centre drills - Lot located at Slater and Crabtree site

359 31 - Lin Bins of various imperial drills - Lot located at Slater and Crabtree site

360 12 - Lin Bins of various BSF and BSPT taps - Lot located at Slater and Crabtree site

19

361 10 - Lin Bins of various BSP taps - Lot located at Slater and Crabtree site

362 7 - Lin Bins of various BA taps - Lot located at Slater and Crabtree site

363 28 - Lin Bins of various grub screws and uncallan bolts - Lot located at Slater and Crabtree site

364 29 - Lin Bins of various UNC Allan bolts and nuts - Lot located at Slater and Crabtree site

365 50 - Lin Bins of various Helicoil taps, inserts and tools - Lot located at Slater and Crabtree site

366 4 - Bins of assorted parts for milling heads etc - Lot located at Slater and Crabtree site

367 Box of assorted reamers - Lot located at Slater and Crabtree site

368 Bin of drill chuck spares - Lot located at Slater and Crabtree site

369

7 - Bins of various items to include reamers, tool extensions, bolts etc - Lot located at Slater and

Crabtree site

370

10 - Bins of various metric screws to include counter sunk and grub - Lot located at Slater and Crabtree

site

371

12 - Bins of various UNC screws to include counter sunk and grub etc - Lot located at Slater and

Crabtree site

372 13 - Bins of various BSF and UNF cap screws counter sunk etc - Lot located at Slater and Crabtree site

373 12 - Bins of various BSW nut, screws, grub screws etc - Lot located at Slater and Crabtree site

374 2 - Part rolls of mig wire, one aluminium and one stainless steel - Lot located at Slater and Crabtree site

375

Brown and Sharpe Mcroval 454 coordinate measuring machine with Renishaw Type ES Probe, Bed 755

x 565mm, Serial No. 0596-1577, Date of manufacture. 1996 - Lot located at Slater and Crabtree site

376 Horn M308 bar tooling - Lot located at Slater and Crabtree site

377 Horn M311 bar tooling - Lot located at Slater and Crabtree site

378 Sandvik 327 bar tooling and Horn type 105 tooling - Lot located at Slater and Crabtree site

379 Horn SM328 bar tooling - Lot located at Slater and Crabtree site

380

4 - New Gundrill type drill size 2 - 8.6mm, 1 - 10.8mm, 1 - 10.6mm - Lot located at Slater and Crabtree

site

381 Quantity of new tooling to include drills, cutters etc - Lot located at Slater and Crabtree site

382 Bin containing quantity of milling cutters - Lot located at Slater and Crabtree site

383 Bin containing quantity of milling cutters - Lot located at Slater and Crabtree site

390 2 - Tool holders, one with tooling - Lot located at Slater and Crabtree site






396

Tool holder with chuck and one tool holder with Renishaw MP7 and probe - Lot located at Slater and

Crabtree site









405 Tool holder with milling head - Lot located at Slater and Crabtree site

406 Tool holder with boring head - Lot located at Slater and Crabtree site


20




411 Tool holder - Lot located at Slater and Crabtree site















426 Tool holder with Madinson boring head, 225-300m - Lot located at Slater and Crabtree site


428 Tool holder with Madinson boring head, 150-225mm - Lot located at Slater and Crabtree site


430 Tool holder with boring head, 4-815 inch - Lot located at Slater and Crabtree site

431 Tool holder with boring head, 5-375 inch - Lot located at Slater and Crabtree site





436 2 - Tool holders with Kennametal Bristol Erickson head units - Lot located at Slater and Crabtree site
















455 10 - Turning tools - Lot located at Slater and Crabtree site

21





460 Box of assorted turning cutters - Lot located at Slater and Crabtree site



463 5 - Tool holder adaptors - Lot located at Slater and Crabtree site



466 5 - Tool holder adaptors - Lot located at Slater and Crabtree site


468 10 - Assorted turning tools - Lot located at Slater and Crabtree site

469 10 - Tools - Lot located at Slater and Crabtree site










479 Box of assorted milling and turning tools - Lot located at Slater and Crabtree site

480 13 - Assorted tool holder adaptors - Lot located at Slater and Crabtree site





485 Large tool holder adaptor - Lot located at Slater and Crabtree site





490 Tool adaptor and tool - Lot located at Slater and Crabtree site

491 Large centre, two jaw chuck etc - Lot located at Slater and Crabtree site

492 11 - Assorted centres - Lot located at Slater and Crabtree site

493 18 - Boxes of various sized collets - Lot located at Slater and Crabtree site

494 6 - Tool adaptor holders - Lot located at Slater and Crabtree site


496 ROHM constant face driver, Model COK - Lot located at Slater and Crabtree site

497 ROHM constant face driver, Model COK - Lot located at Slater and Crabtree site




22


502 Magnetic table, 800 x 500mm with mounting plate and cables - Lot located at Slater and Crabtree site

503 2 - Sterling Gundrills high pressure coolant systems - Lot located at Slater and Crabtree site

504 Rotoptic rotary table, 800mm - Lot located at Slater and Crabtree site

505 Rotoptic rotary table, 800mm - Lot located at Slater and Crabtree site

506 Societe Genevoise type P1-5C rotary table, 450mm with tilt - Lot located at Slater and Crabtree site

507 Societe Genevoise type P1-5C rotary table, 450mm with tilt - Lot located at Slater and Crabtree site

508 Societe Genevoise rotary table, 345mm with tilt - Lot located at Slater and Crabtree site

509 Rotary table, 300mm - Lot located at Slater and Crabtree site

510 Face plate, 1060mm - Lot located at Slater and Crabtree site

511 Three jaw chuck 600mm and face plate 400mm - Lot located at Slater and Crabtree site

512 Kitagawa B-210 three jaw chuck, 10 inch - Lot located at Slater and Crabtree site

513 Three jaw chuck, 12 inch - Lot located at Slater and Crabtree site

514 Four jaw chuck, 10 inch - Lot located at Slater and Crabtree site

515 Four jaw chuck, 18 inch - Lot located at Slater and Crabtree site

516 Three jaw chuck, 10 inch - Lot located at Slater and Crabtree site

517 Machine steady - Lot located at Slater and Crabtree site

518 Pair of V Blocks, 18 inch x 12 inch - Lot located at Slater and Crabtree site

519 Pair of V Blocks, 300 x 455mm - Lot located at Slater and Crabtree site



522 Angle plate, 500 x 500mm - Lot located at Slater and Crabtree site

523

3 - Various angle plates, one 305 x 175mm, one 358 x 153mm and one 332 x 257mm - Lot located at


524

3 - Various angle plates, one 157 x 128mm, one 358 x 157mm and one 273 x 273mm - Lot located at


525

5 - Various angle plates, two 203 x 130 x 164, one 105 x 92mm, one 150 x 110mm and one 160 x

157mm - Lot located at Slater and Crabtree site

526 2 - Tilting machine tables, 305 x 230mm - Lot located at Slater and Crabtree site

527 Tilting T slot machine table, 456 x 356mm - Lot located at Slater and Crabtree site

528 T Slot machine table, 510 x 350mm - Lot located at Slater and Crabtree site


530 Surface plate, 470 x 265mm and four various V Blocks - Lot located at Slater and Crabtree site

531 2 - Surface plates, 610 x 610mm - Lot located at Slater and Crabtree site

532 3 - Surface plates, 610 x 610mm - Lot located at Slater and Crabtree site

533 Surface plate, 1250 x 635mm - Lot located at Slater and Crabtree site

534 Surface plate, 1250 x 635mm - Lot located at Slater and Crabtree site

535 2 - T Shot machine tables, 850 x 850mm - Lot located at Slater and Crabtree site

536 2 - 6 inch machine vices - Lot located at Slater and Crabtree site

537 2 - 6 inch machine vices with one tilting - Lot located at Slater and Crabtree site

538 2 - 8 inch machine vices - Lot located at Slater and Crabtree site

539 2 - Machine vices, 1 x 8 inch and 1 x 5 inch - Lot located at Slater and Crabtree site

540 Centre steady for lathe - Lot located at Slater and Crabtree site



543 Angle plate, 465 x 465mm - Lot located at Slater and Crabtree site

23

544 Multi angle machine vice 6 inch jaws - Lot located at Slater and Crabtree site

545 Multi angle T Slot machine table, 385 x 290mm - Lot located at Slater and Crabtree site

547 Quantity of turning tool holders and tools - Lot located at Slater and Crabtree site

548 Quantity of turning tool holders, tool and boring bars - Lot located at Slater and Crabtree site

549 3 - Tuned turning bars - Lot located at Slater and Crabtree site

550 4 - Large tool holders - Lot located at Slater and Crabtree site


552 Sandvik Capto C5 adaptor plate for Taksawa machining centre - Lot located at Slater and Crabtree site


554

Contents of rack to include tool holders, boring bars, turning tools, jaws etc - Lot located at Slater and

Crabtree site

555 Quantity of tool holders and jaws for Webster Bennett - Lot located at Slater and Crabtree site

556 24 inch four jaw chuck - Lot located at Slater and Crabtree site

557 24 inch surface plate and metal table - Lot located at Slater and Crabtree site

558

Cupboard and contents to include grinding wheels angle plates etc - Lot located at Slater and Crabtree

site


560 2 - Boxes of spares some for Mandelli machines - Lot located at Slater and Crabtree site

561 Box of various helicoil taps and drills - Lot located at Slater and Crabtree site

562 Quantity of assorted hand tools to include files, spanners etc - Lot located at Slater and Crabtree site

563 2 - Magnetic vices, 8 x 5 inches - Lot located at Slater and Crabtree site

564 2 - Magnetic vices, 1 - 14 x 6 inches and 1 - 18 x 6 inches - Lot located at Slater and Crabtree site

565 2 - Magnetic vices, 1 - 10 x 5 inches and 1 - 12 x 8 inches - Lot located at Slater and Crabtree site

566 Quantity of height blocks - Lot located at Slater and Crabtree site

567 Various clamps, bolts and T Blocks - Lot located at Slater and Crabtree site

568 Hydraulic press with Enerpac pneumatic pump - Lot located at Slater and Crabtree site

569

Messma-kelch tool presetter Type 330 EA3, Serial No. 3009 with Heidenhain DRO - Lot located at Slater

and Crabtree site

570 Nilfisk industrial vacuum - Lot located at Slater and Crabtree site

571 Edgwick 6 inch double ended pedestal grinder - Lot located at Slater and Crabtree site

572 Union 10 inch double ended pedestal grinder - Lot located at Slater and Crabtree site

573 Milford 10 inch double ended pedestal grinder - Lot located at Slater and Crabtree site

574 2 - T Slot machine tables 550mm x 410mm x 360mm - Lot located at Slater and Crabtree site

580 Quantity of clamping bolts - Lot located at Slater and Crabtree site

581 24 - Tool holders some with tooling - Lot located at Slater and Crabtree site

582 9 - Tool holders some with tooling - Lot located at Slater and Crabtree site

583

2 - Tool holders, one with milling head and one with boring head - Lot located at Slater and Crabtree

site

584 Kaiser Precision boring tool holders - Lot located at Slater and Crabtree site

585 Quantity of hand tools to include spanners, allen keys etc - Lot located at Slater and Crabtree site

586 Tub of assorted tools to include reamers, rippers etc - Lot located at Slater and Crabtree site

587 4 - Assorted milling tools - Lot located at Slater and Crabtree site

588

2 - Milling cutters, one Haydown HS90 80mm and one Sandvik Coromont 160mm cutter - Lot located at


589

2 - Milling tools, one boring head and one Sandvik Coromont 160mm cutter - Lot located at Slater and

Crabtree site

590 15 - Assorted tool holders some with tooling - Lot located at Slater and Crabtree site

24

591 2 - Machine vices, 1 x 6 inch and 1 x 4 inch - Lot located at Slater and Crabtree site

592 Raybrook Model 312 Precision honing machine - Lot located at Slater and Crabtree site

593 Guyson Model Euro 6 shot blast cabinet with extractor cabinet - Lot located at Slater and Crabtree site

594 Moore tools 275mm diameter rotory table - Lot located at Slater and Crabtree site

595 Bore Masters tip lap tool lapping machine, Serial No. TLQ052 - Lot located at Slater and Crabtree site

596 2 - Boxes of clamping posts - Lot located at Slater and Crabtree site




600 Societe Genevoise clamping post sets incomplete - Lot located at Slater and Crabtree site

601 3 - Societe Genevoise rotary centering indicators - Lot located at Slater and Crabtree site

602 Heidenhain TS111 touch probe, Serial No. 2338971A - Lot located at Slater and Crabtree site

603 Rotary centering indicator - Lot located at Slater and Crabtree site

604 Freddy Liquid vacuum unit, 240V - Lot located at Slater and Crabtree site

605 Quantity of various sized metric taps - Lot located at Slater and Crabtree site

606 Quantity of various drills and reamers - Lot located at Slater and Crabtree site

607 Quantity of various drills, reamers and taps - Lot located at Slater and Crabtree site

608 Quantity of various imperial drills, taps etc - Lot located at Slater and Crabtree site

609 Electro Arc welder - Lot located at Slater and Crabtree site

610 Tap shank tapping head - Lot located at Slater and Crabtree site

611 Tap shank tapping head - Lot located at Slater and Crabtree site

612 Quantity of various imperial taps - Lot located at Slater and Crabtree site


614

4.5 inch multiangle machine vice, Eclipse magnetic vice, 350 x 150mm - Lot located at Slater and

Crabtree site

615 Quantity of various tappered shank and straight drill bits - Lot located at Slater and Crabtree site

616 6 - Various G-Clamps - Lot located at Slater and Crabtree site

617 4 - Jaw chuck 16 inches - Lot located at Slater and Crabtree site

618

7 - Compartments of various metric and imperial taps, drills and cutters - Lot located at Slater and

Crabtree site

619 7 - Compartments of various metric and imperial taps - Lot located at Slater and Crabtree site

620 7 - Compartments of various metric and imperial taps - Lot located at Slater and Crabtree site

621

7 - Compartments of various imperial drills, taps and metric drills - Lot located at Slater and Crabtree

site

622

8 - Compartments of various metric and imperial tapper shank drills and imperial taps - Lot located at


623

8 - Compartments of various reamers, taps and imperial and metric tapper shank drills - Lot located at


624 7 - Compartments of various reamers and tapper shank drills - Lot located at Slater and Crabtree site

625 Quantity of various tappered shank tool holders - Lot located at Slater and Crabtree site

626 Quantity of various tapper shank drills, reamers, taps etc - Lot located at Slater and Crabtree site

627 Quantity of straight and tappered drills - Lot located at Slater and Crabtree site

628 Quantity of various reamers - Lot located at Slater and Crabtree site

629 Quantity of imperial emage taps - Lot located at Slater and Crabtree site

630 5 - Boxes of various imperial taps - Lot located at Slater and Crabtree site

631 5 - Tapper shank drill chucks and lother tool holders - Lot located at Slater and Crabtree site

25



634

2 - Boxes of various hand tools to include spanners, files, hammers etc - Lot located at Slater and

Crabtree site

635

Quantity of small hand tools to include Torx and allen keys and small spanners - Lot located at Slater

and Crabtree site

636 Quantity of clamp post components - Lot located at Slater and Crabtree site

637 6 - Magnetic dial indicator post plus and one other - Lot located at Slater and Crabtree site

638 Quantity of clamping bolts - Lot located at Slater and Crabtree site

640

Mark MSB 22/8 screw compressor, Hours. 37,701, Serial Number. CAI174294, Date of manufacture

2005 - Lot located at Slater and Crabtree site

641

Mark RF20 screw compressor, Hours. 23,188, Serial Number 19075756 - Lot located at Slater and

Crabtree site

642

Mark MDX 3600 air dryer single phase, Serial Number 170271, Date of manufacture 2005 - Lot located


643

TER-MEC 500 litre vertical air receiver, Max pressure 11 bar, Serial No. 57498, Date of manufacture

2004 - Lot located at Slater and Crabtree site

644 Morris overhead gantry crane SWL 3 tonnes, 13 x 4.5m - Lot located at Slater and Crabtree site

645 Overhead gantry crane SWL 3.2 tonnes, 14.5 x 7.7m - Lot located at Slater and Crabtree site

646 Jib crane with Demag 1000kg electric hoist 3.6 x 3.5m - Lot located at Slater and Crabtree site

647

Demag jib crane with Demag IT electric hoist, 5 x 2.2m approximatley - Lot located at Slater and

Crabtree site

648 Stahl electric hoist SWL 500kg chain length 7m max - Lot located at Slater and Crabtree site

649

Jib crane with Morris Chainmaster 1T electric hoist, 3.5 x 4.5 approximatley - Lot located at Slater and

Crabtree site

655 Ormecob steel laying out table, 72 inch x 37 inch - Lot located at Slater and Crabtree site

656 4 - Assorted storage cupboards - Lot located at Slater and Crabtree site

657 2 - Steel framed work benches, 6ft x 3ft - Lot located at Slater and Crabtree site

658

2 - Steel framed work benches, 1 - 6ft x 3ft with three drawers and cubpoard and 1 - 4ft x 2ft with vice

and three drawers and cupboard - Lot located at Slater and Crabtree site

659 Steel framed workbench, 4300 x 820mm - Lot located at Slater and Crabtree site

660 Steel framed workbench, 4300 x 820mm - Lot located at Slater and Crabtree site

661

Steel framed workbench with vice, 72 inch x 29 inch and two drawer steel cupboard 72 inch x 40 inch x

19 inch - Lot located at Slater and Crabtree site

662 Steel banding system consisting of trolley, tensioner and crimp - Lot located at Slater and Crabtree site

663 2 - Two door cupboards 72 inch x 40 inch x 19 inch - Lot located at Slater and Crabtree site

664 Steel framed worktable and mobile steel framed table - Lot located at Slater and Crabtree site

665

2 - Two door cupboard, 1 - 36 inch x 40 inch x 18 inch and 1 - 48 inch x 40 inch x 19 inch - Lot located at


666 3 - Small cupboards and small table - Lot located at Slater and Crabtree site

667 Quantity or airlines - Lot located at Slater and Crabtree site

668 Quantity of assorted tooling to include end mills, drills etc - Lot located at Slater and Crabtree site

669 Quantity of magnetic stands and dial mounts - Lot located at Slater and Crabtree site

670 Steel rack with six shelves, 76 inch x 85 inch x 26 inch - Lot located at Slater and Crabtree site

671

Two door steel cupboard 72 inch x 40 inch x 19 inch and steel framed bench 120 inch x 34 inch x 24 inch

- Lot located at Slater and Crabtree site

673 2 - Tool cupboards and contents - Lot located at Slater and Crabtree site

674 2 - Steel framed workbenches and stele bench with 2 - Cupboards and three drawers - Lot located at

26


675 2 - Tool cupboards and contents - Lot located at Slater and Crabtree site

676

Steel framed workbench 72 inch x 36 inch x 24 inch and two door cupboard with contents - Lot located


677 2 - Personal lockers and two door 2m cupboard - Lot located at Slater and Crabtree site

678 2 - Metal shelf units and mobile work desk - Lot located at Slater and Crabtree site

679 Nederman extractor, Model N40 - Lot located at Slater and Crabtree site

680 2 - Two door cupboards - Lot located at Slater and Crabtree site

681

Steel framed bench 6ft x 3ft x 2ft and mobile bench 47 inch x 29.5 inch x 30 inch with six drawers - Lot


682 10 - Free standing screens, 73 inch x 48 inch - Lot located at Slater and Crabtree site

683 10 - Free standing screens, 73inch x 48inch - Lot located at Slater and Crabtree site

684 8 - Bays of pallet racking - Lot located at Slater and Crabtree site

685

Contents of yard to include 40ft shipping container stand contents of jib unit, works desk etc - Lot


700 Mitutoyo vernier 100cm max caliper - Lot located at Slater and Crabtree site

701 Mitutoyo 60cm vernier and Rabone 66cm vernier - Lot located at Slater and Crabtree site

702

Mitutoyo 45cm vernier and J&H Smith Ltd microset 24 inch vernier - Lot located at Slater and Crabtree

site

703 Moore and Wright 60cm vernier and Chesterman 66cm vernier - Lot located at Slater and Crabtree site

704

Starrett 12 inch vernier, E Talon 53cm vernier and Silverline 15cm digital vernier - Lot located at Slater

and Crabtree site

705 Starret 20 inch to 24 inch micrometer in box - Lot located at Slater and Crabtree site

706 Moore and Wright 12 inch to 16 inch micrometer in box - Lot located at Slater and Crabtree site

707 Frost Engineers - Lot located at Slater and Crabtree site

708 Verdict Squareness Compartor 450mm high in box - Lot located at Slater and Crabtree site

709 2 - Height gauges - Lot located at Slater and Crabtree site

710

11 - Moore and Wright micrometers 1 to 2 inches to 11 to 12 inches in 1 inch increments - Lot located


711

11 - Moore and Wright micrometers 1 to 2 inches to 11 to 12 inches in 1 inch increments - Lot located


712

5 - Micrometers 0 - 7 inch in 1 inch increments (no 4 to 5 inches) - Lot located at Slater and Crabtree

site

713 3 - Micrometers 0 - 3 inch in 1 inch increments - Lot located at Slater and Crabtree site



716 2 - 1 to 2 inch micrometers - Lot located at Slater and Crabtree site

717 17 - Imperial Go No Go Ring gauges - Lot located at Slater and Crabtree site

718 Quantity of imperial Go No Go plug thread gauges - Lot located at Slater and Crabtree site

719 13 - Imperial and metric Go No Go ring thread gauges - Lot located at Slater and Crabtree site

720 Metric plug and ring Go No Go thread gauges - Lot located at Slater and Crabtree site

721 Imperial Go No Go plug thread gauges - Lot located at Slater and Crabtree site

722 Imperial Go No Go plug and ring thread gauges - Lot located at Slater and Crabtree site

723 Imperial Go No Go plus and ring thread gauges - Lot located at Slater and Crabtree site

724 Imperial Go No Go ring gauges - Lot located at Slater and Crabtree site

725 Large Go No Go thread ring gauges - Lot located at Slater and Crabtree site

728 Watts Microptic Precision Clinometer, Model TB9000, Serial No. 115531 - Lot located at Slater and

27

Crabtree site

729

2 - Height gauges, 1 - 26 inch Chesterman, 1 - Shardlow and 3 - Dial indicator gauges - Lot located at


730 3 - Square gauges 112 x 48mm, 84.5 x 247mm and 94 x 360mm - Lot located at Slater and Crabtree site

731 Hite Ritz 12 inch micrometer - Lot located at Slater and Crabtree site

732 2 - Angle plates, 1 - 310 x 305mm and 1 - 267 x 270mm - Lot located at Slater and Crabtree site

733

3 - Various fish back bedding bars, 1 - 24 1/4 inch, 1 - 36 1/4 inch and 1 - 47 3/4 inch - Lot located at


734

3 - Various fish back bedding bars, 1 - 12 inch, 1 - 36 1/4 inch and 1 - 47 3/4 inch - Lot located at Slater

and Crabtree site

735 Trimos vertical TVD800A digital height gauge, Serial No. 5695 - Lot located at Slater and Crabtree site

736 Trimos vertical TVD800A digital height gauge, Serial No. 5689 - Lot located at Slater and Crabtree site

737 Metal workbench, 1830 x 740mm - Lot located at Slater and Crabtree site

738 Metal workbench, 1840 x 580mm - Lot located at Slater and Crabtree site

739 Crown granite surface plate, 24 inch x 24 inch - Lot located at Slater and Crabtree site

740

Crown Windley granite surface table, 6ft x 3ft x 6ft, Serial No. 7381, Date of manufacture 1981 on

Ormerod steel table - Lot located at Slater and Crabtree site

741 Crown Granite surface table, 5ft x 3ft x 6ft on steel table - Lot located at Slater and Crabtree site

742 Crown Granite surface table, 4ft x 2ft x 6ft on steel table - Lot located at Slater and Crabtree site

746 Rockwell hardness tester with spare work holders - Lot located at Slater and Crabtree site

747 Foundrax Model 134 Brinell hardness tester, Serial No. VQ89 - Lot located at Slater and Crabtree site

748 Hardness calibration plates, 1 - 257.8 HBW and 1 - 314.1 HBW - Lot located at Slater and Crabtree site

749

Hardness calibration plates, 1 - 210.5 HBW, 1 - 63.14 HRC, 1 - 94.45 HRB, 1 - 63.32 HRC and 1 - 94.19

HRB - Lot located at Slater and Crabtree site

750 SEBA Developments bench top wax melter - Lot located at Slater and Crabtree site

751

Various items to include bore gauges, angle plate, setting spills, adjustable mag vice, plug gauges etc -

Lot located at Slater and Crabtree site

752 Tesa Internal micrometer and ring gauges set - Lot located at Slater and Crabtree site

753 Tesa Internal micrometer and ring gauges set - Lot located at Slater and Crabtree site

754 Shardlow 4 - 5 inch and various Tesa internal micrometers - Lot located at Slater and Crabtree site

755 Precision level and three thread gauges - Lot located at Slater and Crabtree site

756

3 - Internal bore gauges, 1 - Baty, 1 - John Ball Model X and 1 - John Bull Model Y - Lot located at Slater

and Crabtree site

757 2 - Internal bore gauges by John Bull Model SBY and SBX - Lot located at Slater and Crabtree site

758 2 - Diatest Type 01Z internal bore gauges - Lot located at Slater and Crabtree site

759 2 - Starrett bore gaugues - Lot located at Slater and Crabtree site

760 2 - Bore gauges, 1 - Moore and Wright and 1 - Starrett - Lot located at Slater and Crabtree site

761 2 - Starret bore gauges - Lot located at Slater and Crabtree site

762 2 - Incomplete sets of slip gauges - Lot located at Slater and Crabtree site


764 2 - Sets of slip gauges - Lot located at Slater and Crabtree site




768 2 - Sets of sliip gauges incomplete - Lot located at Slater and Crabtree site


770 3 - Dail Caliper gauges, 1 - 1.2 to 2 inch, 1 - 2 to 2.8 inch and 1 - 55 to 75mm - Lot located at Slater and

28

Crabtree site

771 Contents of drawer to include drill and plug gauges - Lot located at Slater and Crabtree site

772

Contents of drawer to include metric and imperial taps Go No Go gauges - Lot located at Slater and

Crabtree site

773 Internal micrometers, 1 to 12 inch - Lot located at Slater and Crabtree site

774 2 - Sets of bore gauges - Lot located at Slater and Crabtree site

775 2 - Depth gauges and spare rods - Lot located at Slater and Crabtree site

776 Moore and Wright depth gauge and spare rods - Lot located at Slater and Crabtree site

777 2 - Moore and Wright depth gauges - Lot located at Slater and Crabtree site

778 2 - Internal bore micrometer - Lot located at Slater and Crabtree site

779 Tesa Internal bore micrometer and ring gauges - Lot located at Slater and Crabtree site

780 Various internal bore micrometers and ring gauges - Lot located at Slater and Crabtree site

781

Tesa internal / external unitest micrometer with 500mm extension bar - Lot located at Slater and

Crabtree site

782

Interapid 375 inch to 6 inch internal dial gauge and depth micrometer - Lot located at Slater and

Crabtree site

783 John Bull 12 inch internal bore gauge, 2 inch to 6 inch diameter - Lot located at Slater and Crabtree site

784 John Bull 9 inch internal bore guage, 6 inch to 12 inch diameter - Lot located at Slater and Crabtree site

785

Moore and Wright 0 - 12 inch adjustable depth gauge micrometer - Lot located at Slater and Crabtree

site

786

Fowler Bowers internal micrometer 4 inch to 5 inch with setting ring - Lot located at Slater and Crabtree

site

787 CG and T Morse Tapers plus three other tapers - Lot located at Slater and Crabtree site

788 12 - External micrometers 0 - 12 inch in inch increments - Lot located at Slater and Crabtree site

789 Moore and Wright micrometer setting rods - Lot located at Slater and Crabtree site

790 Hoffman imperial roller gauges and sine bar - Lot located at Slater and Crabtree site

791 3 - Matrix length standards 12 inch to 24 inch - Lot located at Slater and Crabtree site

792 8 - Setting blocks - Lot located at Slater and Crabtree site

793 8 - Various metric ring gauges - Lot located at Slater and Crabtree site

794 4 - Various parallels - Lot located at Slater and Crabtree site

795 3 - Small V blocks - Lot located at Slater and Crabtree site

796 2 - Imperial ring gauges 2-8 inches - 3-5 inches - Lot located at Slater and Crabtree site

797

Moore and Wright 0 to 12 inch adjustable depth gauge micrometer - Lot located at Slater and Crabtree

site

798 Starrett 0 to 10 inch adjustable depth gauge micrometer - Lot located at Slater and Crabtree site

799 14 - Moore and Wright bore micrometers - Lot located at Slater and Crabtree site

800

Quantity of various measuring equipment to include slip gauges, micrometers, thread measuring

gauges etc - Lot located at Slater and Crabtree site

801

Moore and Wright surfmatic 150 portable surface roughness tester - Lot located at Slater and Crabtree

site

802

Eseway portable electronic hardness tester, Type 650GB, Serial No. 5302 - Lot located at Slater and

Crabtree site

803 Allen VIP BV2 probe inspection set - Lot located at Slater and Crabtree site

804 9 - Various ring gauges - Lot located at Slater and Crabtree site

805

Pryor Marktronic LD2 Portadot etching machine and 2 - Pneumatic etching tools - Lot located at Slater

and Crabtree site

806

LKG80 Mircovector Bridge coordinate measuring machine with Renishaw PH10T Probe, Renishaw

MCU1 joy stick controller, Renishaw Universal CMM controller YCC 2 granite bed 3060 x 1860mm,

29

670mm under probe, Serial No. 20R984 - Lot located at Slater and Crabtree site

807 Denco Model SA0.9 compressed air dryer, Serial No. F02361 - Lot located at Slater and Crabtree site

810 Bench with Record 84 vice, 1030 x 640mm - Lot located at Slater and Crabtree site

811

Welconstruct metal storage units, 2 - Five drawers, 1 - Two drawers and cupboard 36 x 24 x 33 inch -


812

Metal double pedestal desk, 1400 x 770mm and 2 - Two drawer filing cabinet - Lot located at Slater and

Crabtree site

813

Sappelle carved desk, 1800 x 1800 x 800 with two drawer pedestal and faux leather executive chair -


814 Bott 2m tamba fronted cupboard - Lot located at Slater and Crabtree site

815 2 - Operators chairs - Lot located at Slater and Crabtree site

816

Contents of canteen to include 8 - Tables, 1825 x 685mm, 20 - Chairs etc - Lot located at Slater and

Crabtree site

820

Pair of desks, 1 - 1800 x 1200mm and 1 - 1800 x 1160mm with desk divider and chair - Lot located at


821 4 - Black chairs and coffee table, 1180 x 780mm - Lot located at Slater and Crabtree site

822 Trestle table, 60" x 29" and flipchart - Lot located at Slater and Crabtree site

823 3 - Four drawer filing cabinets - Lot located at Slater and Crabtree site

824 4 - Desks and 1 - Pedestal - Lot located at Slater and Crabtree site

825 4 - Desks and 5 - Pedestals - Lot located at Slater and Crabtree site

826 Printer desk, mobile side table and small bookcase - Lot located at Slater and Crabtree site

827 3 - Bookcases and desk with shelf unit - Lot located at Slater and Crabtree site

830 4 - Purple chairs and two coffee tables - Lot located at Slater and Crabtree site

831

Meeting table 2400 x 1200mm with 6 - Maroon chairs and 4 - Cupboard Credenza 1800 x 545 x 760mm

- Lot located at Slater and Crabtree site

832

2 - Time Pression clocking in machine, 1 - TP150 and 1 - TP200D with card racks - Lot located at Slater

and Crabtree site

833 Display table with circular glass top, 900mm - Lot located at Slater and Crabtree site

834 Meeting table 2400 x 1200 with 8 - Chairs - Lot located at Slater and Crabtree site

835

Nobo pin board 1225 x 920mm, small coffee table and small table - Lot located at Slater and Crabtree

site

836

Desk with right hand return 1600 x 800mm with three drawer pedestal, executive chair and black

reception chair - Lot located at Slater and Crabtree site

837

Credenza with four dawers and two cupboards 1520 x 525 x 725mm with wooden two door low

cupboard, side table and two drawer filing cabinet - Lot located at Slater and Crabtree site

838 3 - Two drawer Escoline filing cabinets - Lot located at Slater and Crabtree site

839 3 - Two drawer Escoline filing cabinets - Lot located at Slater and Crabtree site

841

Desk 1600 x 800mm with right hand return, three drawer pedestal and black executive chair - Lot


842 Three drawer filing cabinet and 1 - Two drawer filing cabinet - Lot located at Slater and Crabtree site

845 2m double door cupboard and two drawer filing cabinet - Lot located at Slater and Crabtree site

846 Black two door cupboard and small bookcase - Lot located at Slater and Crabtree site

847 Meeting table 1600 x 800mm with 6 - Chairs - Lot located at Slater and Crabtree site

848

Remaining contents of room consisting of Credenza four shelf bookcase, table and assorted chairs - Lot


849 4 - Reception chairs and small coffee table - Lot located at Slater and Crabtree site

850

Double pedestal desk 1600 x 750mm with executive chair and three drawer pedestal - Lot located at


30

851 Pedestal desk 1400 x 800mm with three drawer pedestal - Lot located at Slater and Crabtree site

852

Table 1400 x 750mm small side table, double door cupboard and 2 - 6' cupboards - Lot located at Slater

and Crabtree site

853 2 - Tables, 1 - 1780 x 745mm and 1 - 1800 x 750mm - Lot located at Slater and Crabtree site

854 2 - Desks 1800 x 800mm, 1 - Chair and three drawer pedestal - Lot located at Slater and Crabtree site

855 Low tamba cupboard - Lot located at Slater and Crabtree site

856

Quantity of various sundry items consisting of listing paper, two drawer index card unit, circulator etc -


857 Kyocera KM-2050 photocopier with fax and network facilities - Lot located at Slater and Crabtree site

858 Olivetti D-Colour MF250 photocopier - Lot located at Slater and Crabtree site

859

2 - Rexel document shredders, 1 - 1000 Auto High volume shredder and 1 - V40 - Lot located at Slater

and Crabtree site

860 HP DesignJet 110 Plus A2 colour printer - Lot located at Slater and Crabtree site

861 2 - HP printers 1 - LaserJet 1020 and 1 - Deskjet F380 - Lot located at Slater and Crabtree site

862 3 - Three drawer filing cabinets - Lot located at Slater and Crabtree site

863 3 - Two drawer filing cabinets - Lot located at Slater and Crabtree site



869 6 - Two drawer filing cabinets - Lot located at Slater and Crabtree site



868 Chubb fire proof four drawer filing cabinet with two keys - Lot located at Slater and Crabtree site

2000

Noble and Lund triple head plano milling machine, 8ft x 6ft x 20ft with contractor switchgear controls,

Newall DP1200 and SA100 DRO's, Serial No. 2040H - Plant Number 309 - “Please note: This equipment

must be fully tested in accordance with the appropriate regulations / LOLER regulations prior to being

put into use. The purchaser will be required to sign an undertaking prior to the removal from site

confirming their agreement to ensure this item is tested & certified in accordance with Regulations

prior to it being put into use.” - This Lot is located at Joseph Rhodes Site

2001

Butler Elgamill CS10 milling machine with universal traveling head, 900 x 6000mm bed, Newall DP7

DRO, Serial No. 26269 - Plant No. 68 - “Please note: This equipment must be fully tested in accordance

with the appropriate regulations / LOLER regulations prior to being put into use. The purchaser will be


this item is tested & certified in accordance with Regulations prior to it being put into use.” - This Lot is

located at Joseph Rhodes Site

2002

Kearns Richards SJ100 horizontal borer, 1500 x 1500mm table, max height 1500mm, max travel 1800 x

1500mm with Heienhain Positip 850 DRO - Plant No. 1003 - “Please note: This equipment must be fully

tested in accordance with the appropriate regulations / LOLER regulations prior to being put into use.

The purchaser will be required to sign an undertaking prior to the removal from site confirming their

agreement to ensure this item is tested & certified in accordance with Regulations prior to it being put

into use.” - This Lot is located at Joseph Rhodes Site

2003

Butler SE8A planer mill four heads two top two side 8ft x 22ft bed, Serial No. 25154 - Plant No. 5 -

“Please note: This equipment must be fully tested in accordance with the appropriate regulations /

LOLER regulations prior to being put into use. The purchaser will be required to sign an undertaking

prior to the removal from site confirming their agreement to ensure this item is tested & certified in

accordance with Regulations prior to it being put into use.” - This Lot is located at Joseph Rhodes Site

2004

Kearns Richards SE150 horizontal borer, 1800 x 1800mm rotating table, max travel 2160 x 2100 x

2430mm with Retrofil A5 Automate control and Newal DP1200 DRO, Serial No. 6900 - Plant No. 102 -



31



2005

Asquith 4 RYM horizontal boring machine, 9ft x 9ft rotating table, 10ft x 10ft static table, max travel

6500 x 2200 x 600mm with two right angle heads, one facing plate, Anilam Wizard DRO, Serial No.

521209 - “Please note: This equipment must be fully tested in accordance with the appropriate



certified in accordance with Regulations prior to it being put into use.” - This Lot is located at Joseph

Rhodes Site

2006

Rhodes hydraulic twin RAM pressbrake, Capacity 5mm, 2439mm max width - Plant No. 123 - “Please

note: This equipment must be fully tested in accordance with the appropriate regulations / LOLER

regulations prior to being put into use. The purchaser will be required to sign an undertaking prior to

the removal from site confirming their agreement to ensure this item is tested & certified in accordance

with Regulations prior to it being put into use.” - This Lot is located at Joseph Rhodes Site

2007

Asquith mobile radial arm drill, Serial No. PU1242, Date of manufacture 1956 - Plant No. 746 - “Please

note: This equipment must be fully tested in accordance with the appropriate regulations / LOLER

regulations prior to being put into use. The purchaser will be required to sign an undertaking prior to

the removal from site confirming their agreement to ensure this item is tested & certified in accordance

with Regulations prior to it being put into use.” - This Lot is located at Joseph Rhodes Site

2008

Metropolitain Vickers horizontal borer drill, 24 inch x 39 inch table - Plant No. 700 - “Please note: This

equipment must be fully tested in accordance with the appropriate regulations / LOLER regulations

prior to being put into use. The purchaser will be required to sign an undertaking prior to the removal

from site confirming their agreement to ensure this item is tested & certified in accordance with

Regulations prior to it being put into use.” - This Lot is located at Joseph Rhodes Site

2009

Qualters and Smith horizontal bandsaw 24 inch throat, Model 260A, Serial No. 1851 with on and off

feed rollers - “Please note: This equipment must be fully tested in accordance with the appropriate




Rhodes Site

2010

Butler Elgamill CS10 with Newall DP7 for spares - “Please note: This equipment must be fully tested in

accordance with the appropriate regulations / LOLER regulations prior to being put into use. The

purchaser will be required to sign an undertaking prior to the removal from site confirming their



2011

Noble and Lund Plano milling machine, Model LMA, 4ft x 4ft x 11ft with Clarke Chapman and Co

Pendulam controller - “Please note: This equipment must be fully tested in accordance with the



tested & certified in accordance with Regulations prior to it being put into use.” - This Lot is located at

Joseph Rhodes Site

2012

Butler Elgamill milling machine 2015 x 750mm table with Anilam Mini Wizard DRO - “Please note: This





2013

Clarkson Mark II tool and cutter grinder - “Please note: This equipment must be fully tested in





2014 Rhodes Treadle hydraulic shear, capacity 5mm, plate 8ft wide - “Please note: This equipment must be

32

fully tested in accordance with the appropriate regulations / LOLER regulations prior to being put into

use. The purchaser will be required to sign an undertaking prior to the removal from site confirming

their agreement to ensure this item is tested & certified in accordance with Regulations prior to it being

put into use.” - This Lot is located at Joseph Rhodes Site

2015

Johansson 3U-C cylindrical grinding machine, 4m bed, Serial No. 10020 - Plant No. 105 - “Please note:

This equipment must be fully tested in accordance with the appropriate regulations / LOLER regulations




2016

Cincinnati Milacron 20H1250 horizontal milling machine, 800 x 800mm rotary table, Wickers Acramatic

2100 controller - Plant No. 74 - “Please note: This equipment must be fully tested in accordance with

the appropriate regulations / LOLER regulations prior to being put into use. The purchaser will be




2018

Churchill cylindrical grinder 36 inch bed, 18 inch grinding wheel, Serial No. 15544 - Plant No. 536 -





2019

King Rich Pro 3000 SLI/B milling machine with Acurite DRO, Serial No. P403, Date of manufacture 1997 -





2020

Archdale 48 inch radial arm drill with T Slot Box table, 2000 x 1100mm - Plant No. 191 - “Please note:

This equipment must be fully tested in accordance with the appropriate regulations / LOLER regulations




2021

Parkson Model 2V milling machine 48 inch bed, Heidenhain DRO - Plant No. 46 - “Please note: This





2022

Asquith ODT 36 inch radial arm drill with T Slot Box table 36 inch x 30 inch, Serial No. OD16839, Date of

manufacture 49 - Plant No. 703 - “Please note: This equipment must be fully tested in accordance with





2023

The LaPointe Machine Tools Co No. 4 broaching machine, 70 inch bed with quantity of broaching tools -





2024

Lang Centre Lathe 14ft bed 20 inch throw with four jaw chuck Newall DP700 DRO - “Please note: This





2025 Fromag RA63/425 slotting machine with cabinet and rack of various tooling, Serial No. AKK77074, Date

33

of manufacture 1976 - Plant No. 47 - “Please note: This equipment must be fully tested in accordance





2026

Barber Colman 16-56 gear hobbing machine, 16 inch max diameter 56 inch max travel, Serial No. 4279

with cupboard, contents and six steadies - “Please note: This equipment must be fully tested in





2027

Dean Smith and Grace Type 21 72 inch gap bed lathe, three jaw chuck, twin tool holders, Newall DP8

DRO, Serial No. 37584-12-68 - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2028

Asquith ODI MK2 19/96 radial arm drill with T Slot Box table, 2000 x 1300 x 600mm, Serial No. P33917,

Date of manufacture 1984 - Plant No. 31 - “Please note: This equipment must be fully tested in





2029

Henley Hercules 26 12 Ton forklift truck, max lift 25', Serial No. 1173/54026 - “Please note: This





2031

Pullmax P5 metal shaping machine, 1050mm throat some tooling - “Please note: This equipment must

be fully tested in accordance with the appropriate regulations / LOLER regulations prior to being put

into use. The purchaser will be required to sign an undertaking prior to the removal from site



2032

RJA 4 inch twin belt linisher - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2033

Tech Serve Profile twin head profile cutter with Barny Servopak and Burny 1400 control system 50ft x

15 inch - “Please note: This equipment must be fully tested in accordance with the appropriate




Rhodes Site

2034 Kendal and Gent broaching machine with quantity of cutters - This Lot is located at Joseph Rhodes Site

2035

Rhodes Servo stagger feed press with 2.4mm air table, Siemens multi panel touch screen controllers

with lid making die (Prototype) - Plant No. JRO8337 - “Please note: This equipment must be fully tested

in accordance with the appropriate regulations / LOLER regulations prior to being put into use. The




2036 Rhodes Model S3 cuboid bending machine, 2000 x 1mm working cap control panel with Siemens

34

Simatic touch panel (Display Unit) - Plant No. J589 - “Please note: This equipment must be fully tested

in accordance with the appropriate regulations / LOLER regulations prior to being put into use. The




2037

Rhodes Rhosort blank sorting machine (Display Unit) - Plant No. J680 - “Please note: This equipment





2038

Saxon 80 ton press carcass - Plant No. J718 - “Please note: This equipment must be fully tested in





2039

Coil equipment warehouse NC roller feeder Model NC5040 powered roller feed, Serial No. C1015

(Display Unit) - “Please note: This equipment must be fully tested in accordance with the appropriate




Rhodes Site

2040

Saxon 60 Tonne double sided mechanical press with control panel, max tool size 750 x 400mm, mass of

press 7 tonnes (Display Unit), Serial No. 17791 - “Please note: This equipment must be fully tested in





2041

Coil equipment warehouse lurch feed unit (Display Unit) - Plant No. 1056 - “Please note: This





2042

Coil equipment warehouse double sided decoiler with control panel, Serial No. C1029 (Display Unit) -





2043

Coil equipment warehouse single sided decoiler, Serial No. C1016 (Display Unit) - “Please note: This





2044

Coil equipment warehouse GF/906N hi speed gripper feed unit cap up 1.5mm, max width 90mm, Serial

No. 17719/870200148 (Display Unit) - Plant No. JR1013 - “Please note: This equipment must be fully





2045

Coil equipment warehouse single sided sheet metal decoiler, Serial No. C1051 (Display Unit) - Plant No.

JC1036 - “Please note: This equipment must be fully tested in accordance with the appropriate



35


Rhodes Site

2046

Rhodes Quartz 380 punching machine max material size 6mm thick, 2 x 1m sheet size with air table 5 x

2.6m, Serial No. 17781 (Display Unit) - Plant No. J710 - “Please note: This equipment must be fully





2047

Rhodes RHOBOT 2 Axis Interpress transfer unit Model RR10-2 blank size 600 x 600mm, Serial No. 17519

(Display Unit) - Plant No. J636 - “Please note: This equipment must be fully tested in accordance with





2048

Coil Equipment warehouse powered roller feed with control panel, Serial No. C1121 (Display Unit) -





2049

Carbon Fibre tube making machine and ancillary equipment (Research Project) - “Please note: This





2053

Rhodes 2 ton bench mounted press - “Please note: This equipment must be fully tested in accordance





2054

Rhodes manual box pan folder 72 inch cap - “Please note: This equipment must be fully tested in





2055

Rhodes bench top fly press - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2056

Bench top wire stripper - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2057

2 - Rhodes manual swagging machines with bench mounts - “Please note: This equipment must be fully





2058 Steel bench 3ft x 4ft - This Lot is located at Joseph Rhodes Site

2059

36 inch treadle operated shear - “Please note: This equipment must be fully tested in accordance with


36




2060

J Rhodes and Sons moulded guttering machine - “Please note: This equipment must be fully tested in





2061

J Rhodes and Sons No. 20 upright power press 20 ton capacity circa 1865 - “Please note: This





2062

Bench top shear with 7 inch blade - “Please note: This equipment must be fully tested in accordance





2063

Bench top shear with 12 inch blade - “Please note: This equipment must be fully tested in accordance





2064

Bench top 30 degree folder, 31 inch capacity - “Please note: This equipment must be fully tested in





2065

Bench top fly press - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2066

Rhodes manual swagger plus one other and two bench mounts - “Please note: This equipment must be





2067 Metal shelf unit, 17 inch x 32 inch x 79 inch - This Lot is located at Joseph Rhodes Site

2068 Porch lift vertical wheelchair lift, 1.67m max lift SWL 227kg - This Lot is located at Joseph Rhodes Site

2070

Rhodes bench mounted shear 14 inch max cut - “Please note: This equipment must be fully tested in





2071

Rhodes 48 inchpan folder, 2mm max thickness - “Please note: This equipment must be fully tested in





2072 Rhodes manual forming rollers, 72 inch wide - “Please note: This equipment must be fully tested in

37





2073

Lang 20 inch lathe with four jaw chuck and screw cut facility with Goodwin Executive 2A-2 DRO -





2074

Jones and Shipman cylindrical grinder, Model 1077, Serial No. BO99123 - “Please note: This equipment





2076

Meddings bench mounted pillar drill with 1/2 inch chuck, Serial No. MB4 31591 - “Please note: This





2088

Black and Decker 6" Junior bench grinder, Serial No. 214559 - “Please note: This equipment must be





2077

Rhodes Rhomint MKII HSC160 high speed vertical coining press, 3200 x 1750 x 2900 - “Please note: This





2078

Spen Stead shot blast cabinet with work trolley, 4.6 x 3.3 x 3.6 - “Please note: This equipment must be





2079

Cooper heat oven, 26 ft x 11 x 10ft 9inch - “Please note: This equipment must be fully tested in





2080

Rascamat pneumatic tapping arm on trolley - “Please note: This equipment must be fully tested in





2081 Asquith 6 ft radial arm drill decommissioned for spares - This Lot is located at Joseph Rhodes Site

2082

Dunphy Ratiotronic 6000 Series heavy fuel oil burner, Type TH41OZMRT, Serial No. 23709, Date of

manufacture 10/2013 - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

38

2083

Belliss and Morcom compressor Type SDA122A, Serial No. 3827, Hours 23,398, Max pressure 7.5 bar -





2084

Cool Technology vertical air receiver, Capacity 1500 litres, Serial No. RBC254356/01, Date of

manufacture 1998 - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2085

Rhodes Press 80 tonnes max force bed 31 inch x 32 inch max travel 24 inch - “Please note: This





2086

Bench mounted double ended pedestal grinder - “Please note: This equipment must be fully tested in





2087

Bench mounted pillar drill - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2090 Pair of V Blocks, 625 x 355mm - This Lot is located at Joseph Rhodes Site

2091 Pair of V Blocks, 625 x 355mm - This Lot is located at Joseph Rhodes Site

2092 Pair of parallels, 1050mm - This Lot is located at Joseph Rhodes Site

2093 Abwood 8 ft machine vice - This Lot is located at Joseph Rhodes Site

2094 Rack and contents consisting of quantity of cutting tools - This Lot is located at Joseph Rhodes Site

2095 Contents of table to include drills, taps etc - This Lot is located at Joseph Rhodes Site

2100 T Slot angle plate, 1000 x 1150mm - This Lot is located at Joseph Rhodes Site

2101 T slot angle plate, 2 ft x 2 ft - This Lot is located at Joseph Rhodes Site

2102

Pair of angle plates 6 ft x 12 ft and pair of angle plates 7 ft x 14 ft - This Lot is located at Joseph Rhodes

Site

2103 6 - Various V Blocks - This Lot is located at Joseph Rhodes Site

2104 Pair of machine V Blocks, 6 ft x 8 ft - This Lot is located at Joseph Rhodes Site

2105 Pair of machine V Blocks, 13 ft x 3.5 ft - This Lot is located at Joseph Rhodes Site

2106 Pair of Carver T Slot clamps - This Lot is located at Joseph Rhodes Site

2107 Pair of Carver T Slot clamps - This Lot is located at Joseph Rhodes Site

2108 Pair of Carver Buttress clamps - This Lot is located at Joseph Rhodes Site

2109 Parkinson 8a 6" Engineers vice - This Lot is located at Joseph Rhodes Site

2110 Quantity of various hand tools to include spanners, files etc - This Lot is located at Joseph Rhodes Site

2111 8 - Tool holders some with tooling - This Lot is located at Joseph Rhodes Site




2115 2 - Small racks of tool holders and tooling - This Lot is located at Joseph Rhodes Site

39

2116 Rack of tool holder tooling and clamps - This Lot is located at Joseph Rhodes Site

2117 Twelve bin storage unit and contents - This Lot is located at Joseph Rhodes Site

2118 Shelf of various Taper Shank drills - This Lot is located at Joseph Rhodes Site

2119 Shelf of various Taper Shank drills - This Lot is located at Joseph Rhodes Site

2125 Contents of drawer to include various taps - This Lot is located at Joseph Rhodes Site

2126 Contents of drawer to include various slot drills - This Lot is located at Joseph Rhodes Site

2127 Contents of drawer to include various end mills - This Lot is located at Joseph Rhodes Site

2128 Contents of drawer to include various reamers - This Lot is located at Joseph Rhodes Site

2129

Contents of drawer to include various milling tools and cutting tips - This Lot is located at Joseph

Rhodes Site

2130 6 - Boring heads and Cincinnati tooling gauge - This Lot is located at Joseph Rhodes Site

2131 Contents of drawer to include various Taper Shank drills - This Lot is located at Joseph Rhodes Site

2132 Contents of drawer to include various taper shank drills - This Lot is located at Joseph Rhodes Site

2133 Contents of drawer consisting of various taper shank drills - This Lot is located at Joseph Rhodes Site

2134

Contents of drawer consisting of various taper shank drills and collets - This Lot is located at Joseph

Rhodes Site

2135 Contents of drawer consisting of various taper shank drills - This Lot is located at Joseph Rhodes Site

2136 Seven drawer metal tool storage unit, 760 x 705 x 1915mm - This Lot is located at Joseph Rhodes Site

2137 Eight drawer metal tool storage unit, 750 x 750 x 1000mm - This Lot is located at Joseph Rhodes Site

2138 2 - Milling cutters, 2 - Taps and 4 - Extension bars - This Lot is located at Joseph Rhodes Site

2139 Jib unit with 500kg hoist, 4.6 x 4.6m approximately - This Lot is located at Joseph Rhodes Site

2140

Jib unit with 1 tonne electric hoist SWL 500kg, 3674mm high Jib 5500mm long approximately - This Lot

is located at Joseph Rhodes Site

2145 2 - Wooden cupboards and contents - This Lot is located at Joseph Rhodes Site

2146 4 - Metal shelves and contents - This Lot is located at Joseph Rhodes Site

2147 Metal shelf unit and contents consisting of various spanners - This Lot is located at Joseph Rhodes Site

2148 Centre steady for lathe, 375mm wide - This Lot is located at Joseph Rhodes Site

2149 Centre steady for lathe, 300mm wide - This Lot is located at Joseph Rhodes Site

2150 Contents of shelf unit consisting of taps, hand tools etc - This Lot is located at Joseph Rhodes Site

2151 Contents of shelf unit consisting of taps and reamers etc - This Lot is located at Joseph Rhodes Site

2152 Morris 250kg electric hoist - This Lot is located at Joseph Rhodes Site

2153 Centre Steady for lathe, 390mm wide - This Lot is located at Joseph Rhodes Site

2154 Four rack of assorted cutter and clamping parts - This Lot is located at Joseph Rhodes Site

2155 Pedestal mounted double end grinder - This Lot is located at Joseph Rhodes Site

2156 Steel bench with Record 183C pipe vice, 765 x 1070mm - This Lot is located at Joseph Rhodes Site

2157 Pedestal mounted double ended grinder - This Lot is located at Joseph Rhodes Site

2158 Parkinson 8a 6 inch vice - This Lot is located at Joseph Rhodes Site

2159 3 - Tool holders with Sandvik Coromant Varilock units - This Lot is located at Joseph Rhodes Site









40








2175 RJH Engineering wet stone grinder with coolant pump - This Lot is located at Joseph Rhodes Site

2176 Abwood 160mm machine vice and meca 320mm rotary table - This Lot is located at Joseph Rhodes Site

2177 Pair of V Huffam plates and angle plate, 12 inch x 10 1/2 inch - This Lot is located at Joseph Rhodes Site

2178 Variable angle machine plate - This Lot is located at Joseph Rhodes Site

2179 Angle plate, 800 x 730mm - This Lot is located at Joseph Rhodes Site

2180 2 - 2 ft surface plates - This Lot is located at Joseph Rhodes Site

2181 Machine Block 465 x 465 x 885mmm - This Lot is located at Joseph Rhodes Site

2182 Steel table 740 x 485 x 610mm - This Lot is located at Joseph Rhodes Site

2183 2 - Machine head units - This Lot is located at Joseph Rhodes Site

2184 2 - Machine head units - This Lot is located at Joseph Rhodes Site

2185

Contents of pallet consisting of various parts for Jones and Shipman grinder - This Lot is located at

Joseph Rhodes Site

2186 2 - Jones and Shipman steadies - This Lot is located at Joseph Rhodes Site

2187 2 - Machine steadies - This Lot is located at Joseph Rhodes Site

2188

Pratt Bernard 8 inch four jaw chuck and 1 - 12 inch four jaw chuck - This Lot is located at Joseph Rhodes

Site

2189 24 inch four jaw chuck - This Lot is located at Joseph Rhodes Site

2190 18 inch four jaw chuck - This Lot is located at Joseph Rhodes Site

2191 Pair or V Blocks - This Lot is located at Joseph Rhodes Site

2192 V Block and two clamping blocks - This Lot is located at Joseph Rhodes Site

2193 Pair of V Blocks - This Lot is located at Joseph Rhodes Site

2194 2 - Angle plates - This Lot is located at Joseph Rhodes Site

2195 2 - Pairs and three various small V Blocks - This Lot is located at Joseph Rhodes Site

2200 Bench mounted double ended grinder - This Lot is located at Joseph Rhodes Site

2201 6 inch engineers vice - This Lot is located at Joseph Rhodes Site










2211 Laying out table, 3650 x 1830mm - This Lot is located at Joseph Rhodes Site

2213 Pair of angle brackets, 1225 x 625mm - This Lot is located at Joseph Rhodes Site

2214 Angle bracket, 9' x 2' - This Lot is located at Joseph Rhodes Site

2215 Angle bracket, 9' x 2' - This Lot is located at Joseph Rhodes Site

2216 Pair of angle brackets, 24" x 7" - This Lot is located at Joseph Rhodes Site

41




2220 4 - Clamping blocks, 300 x 125 x 100mm - This Lot is located at Joseph Rhodes Site


2222 4 - Assorted clamping blocks - This Lot is located at Joseph Rhodes Site


2224 Clamping block, 1550 x 300 x 320mm - This Lot is located at Joseph Rhodes Site

2225 Black and Decker 8" double ended grinder - This Lot is located at Joseph Rhodes Site

2226 Cupboard and contents consisting of cutters, ripper and drills - This Lot is located at Joseph Rhodes Site

2227

3 - Racks and contents consisting of boring heads, milling cutters etc - This Lot is located at Joseph

Rhodes Site

2228 Rack and contents consisting of clamping posts, clumps etc - This Lot is located at Joseph Rhodes Site

2229 Sandvik milling head, 500mm - This Lot is located at Joseph Rhodes Site

2230

Rack and contents consisting of clamps, clamp posts, cutters etc - This Lot is located at Joseph Rhodes

Site

2231

Contents of two racks consisting of milling cutters, clamp post etc - This Lot is located at Joseph Rhodes

Site

2232 6" engineers vice - This Lot is located at Joseph Rhodes Site

2233 2 - Pneumatic grinder/sanders - This Lot is located at Joseph Rhodes Site

2234 Manual metal punch - This Lot is located at Joseph Rhodes Site

2235 Oxyacetylene pipes and propane torch and trolley - This Lot is located at Joseph Rhodes Site

2236

Cupboard and contents consisting of various welding equipment, tools etc - This Lot is located at Joseph

Rhodes Site

2237 SIP Merlin 210 Arc welder - This Lot is located at Joseph Rhodes Site

2238 ESAB Bantam TBH140 arc welder - This Lot is located at Joseph Rhodes Site

2239 ESAB TGH140 arc welder - This Lot is located at Joseph Rhodes Site

2240 British Oxygen Company 190 AMP AC welding set - This Lot is located at Joseph Rhodes Site

2241

Quantity of various Black Smith formers and a pair of Anvil mounted shears - This Lot is located at

Joseph Rhodes Site

2242 Steel framed bench with pipe/bar and electric saw - This Lot is located at Joseph Rhodes Site

2243

Steel cupboard, 900 x 515 x 1375mm and 4 - Personnel lockers - This Lot is located at Joseph Rhodes

Site

2244

Wet stone grinder with 20" stone - “Please note: This equipment must be fully tested in accordance





2245

Jones and Shipman bench mounted pillar drill - “Please note: This equipment must be fully tested in





2246

Rhodes 2 ton hydraulic press, 500mm travel - “Please note: This equipment must be fully tested in





42

2247

Craven Fawcett 40 ton hydraulic press - “Please note: This equipment must be fully tested in





2248

Asquith 3' radial arm drill with height adjust cable bed, type ASR, Serial No. 19917, Date of

manufacture: 1963 - “Please note: This equipment must be fully tested in accordance with the




Joseph Rhodes Site

2249 Rack and contents consisting of clamping post clumps etc - This Lot is located at Joseph Rhodes Site

2250

Environmental Control Systems dust extraction system - “Please note: This equipment must be fully





2251

Rack and contents consisting of clamping post, milling tools, hand tools etc - This Lot is located at

Joseph Rhodes Site

2252

Electric rotary machine table, 1m wide - “Please note: This equipment must be fully tested in





2500 Curved beech cantilever workstation - This Lot is located at Joseph Rhodes Site

2501 2 - Beech three drawer pedestals - This Lot is located at Joseph Rhodes Site

2503 Side table - This Lot is located at Joseph Rhodes Site

2504 4 - Orange tweed upholstered bucket armchairs - This Lot is located at Joseph Rhodes Site

2505 Glass fronted sideboard unit - This Lot is located at Joseph Rhodes Site

2506 Brown and cream four drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2507 Grey three drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2508 Beech double pedestal desk - This Lot is located at Joseph Rhodes Site

2509 Two drawer metal filing cabinet - This Lot is located at Joseph Rhodes Site

2510

Glass fronted cupboard with additional bookcases - AS LOTTED - This Lot is located at Joseph Rhodes

Site

2511 3 - Brown and cream four drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2513 Black swivel office chair - This Lot is located at Joseph Rhodes Site

2514

Beech meeting table, 2400mm x 1200mm with 7 - Oatmeal cantilever armchairs - This Lot is located at

Joseph Rhodes Site

2515

Two sideboard cabinets, small coffee table and hat and coat stand - This Lot is located at Joseph Rhodes

Site

2516

Double pedestal bureau desk with blue leather inlay, 54 inch x 30 inch - This Lot is located at Joseph

Rhodes Site

2517 Mesh back high backed swivel office chair - This Lot is located at Joseph Rhodes Site

2518

Mahogany effect boardroom table, 2700mm x 1220mm with 8 - Green leather matching chairs - This

Lot is located at Joseph Rhodes Site

2519 Mahogany effect square cabinet - This Lot is located at Joseph Rhodes Site

2520 Mahogany effect coffee table - This Lot is located at Joseph Rhodes Site

2521 Mahogany effect glass fronted sideboard unit - This Lot is located at Joseph Rhodes Site

43

2512 4 - Orange tweed upholstered bucket armchairs - This Lot is located at Joseph Rhodes Site

2522

Cantilever single pedestal beech curved workstation, 1600mm x 1200mm - This Lot is located at Joseph

Rhodes Site

2523

Cantilever single pedestal beech curved workstation, 1600mm x 1200mm - This Lot is located at Joseph

Rhodes Site

2524 2 - Beech three drawer pedestal - This Lot is located at Joseph Rhodes Site

2525 Beech double pedestal desk, 1600mm x 650mm - This Lot is located at Joseph Rhodes Site

2526

Black leather swivel office chair and brown and leather swivel chair - This Lot is located at Joseph

Rhodes Site

2527 Tricity Bendix fridge - This Lot is located at Joseph Rhodes Site

2528 Black high back swivel leather office chair - This Lot is located at Joseph Rhodes Site

2529 Reproduction TV cabinet - This Lot is located at Joseph Rhodes Site

2530 Blue swivel office chair - This Lot is located at Joseph Rhodes Site

2531 2 - Grey steel four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

2532 2 - Brown and cream four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

5233 2 - Four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

2534

3 - Beech framed red tweed upholstered armchairs with matching two seat sofa - This Lot is located at

Joseph Rhodes Site

2535 5 - Matching bar stools - This Lot is located at Joseph Rhodes Site

2536

11 - Red tweed upholstered dining chairs with matching armchair - This Lot is located at Joseph Rhodes

Site

2537 Stirflow domestic fridge - This Lot is located at Joseph Rhodes Site

2538 Belling glass fronted hot food countertop display cabinet - This Lot is located at Joseph Rhodes Site

2539 Sharp Carousel II microwave oven - This Lot is located at Joseph Rhodes Site

2540 Panasonic PROI 1040 stainless steel microwave oven - This Lot is located at Joseph Rhodes Site

2541 Norfrost small domestic chest freezer - This Lot is located at Joseph Rhodes Site

2542

Topchoice stainless steel oven with four ring electric hob and grill unit, Topchoice dual hob attachment

and Topchoice single basket deep fat fryer - This Lot is located at Joseph Rhodes Site

2543 Beko domestic freezer - This Lot is located at Joseph Rhodes Site

2544 Stainless steel hot water boiler, 240v - This Lot is located at Joseph Rhodes Site

2545

Beech boardroom table 3000mm x 1350mm with 8 - Oatmeal tweed upholstered wooden framed

chairs - This Lot is located at Joseph Rhodes Site

2546

8 - Oatmeal tweed upholstered cantilever chairs with black handles - This Lot is located at Joseph

Rhodes Site

2547 3 - Sapele single pedestal desks - This Lot is located at Joseph Rhodes Site

2548 Sapelle sideboard unit - This Lot is located at Joseph Rhodes Site

2549 Desk - This Lot is located at Joseph Rhodes Site

2550 3 - Various cabinets - AS LOTTED - This Lot is located at Joseph Rhodes Site

2551 Tambour door stationery cabinet - This Lot is located at Joseph Rhodes Site

2552 Index card cabinets - As Lotted - This Lot is located at Joseph Rhodes Site

2553 Glass fronted sideboard unit - This Lot is located at Joseph Rhodes Site

2554 2 - Brown four drawer filing cabinets - This Lot is located at Joseph Rhodes Site



2557 2 - Four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

2558 Grey steel orange door double door stationery cabinet - This Lot is located at Joseph Rhodes Site

2559 Grey steel orange door double door stationery cabinet - This Lot is located at Joseph Rhodes Site

44

2560 Brown three drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2561 Brown two drawer filing cabinet - This Lot is located at Joseph Rhodes Site






2567 Beech cantilever desk - This Lot is located at Joseph Rhodes Site

2568 Beech cantilever desk - This Lot is located at Joseph Rhodes Site

2569 2 - Brown tweed swivel office chairs - This Lot is located at Joseph Rhodes Site


2571 Black tweed upholstered midback swivel chair - This Lot is located at Joseph Rhodes Site

2572 3 - Blue tweed upholstered swivel office chairs - This Lot is located at Joseph Rhodes Site

2573 3 - Grey cantilever desks, 1200mm x 800mm - This Lot is located at Joseph Rhodes Site




2577 Quantity of office furniture - As Lotted - This Lot is located at Joseph Rhodes Site

2578

Beech curved workstations, 1800mm x 1200mm with pedestal - This Lot is located at Joseph Rhodes

Site

2579

Beech curved workstations, 1800mm x 1200mm with pedestal - This Lot is located at Joseph Rhodes

Site

2580 2 - Blue swivel office chairs - This Lot is located at Joseph Rhodes Site

2581 Beech desk, 1600mm x 800mm - This Lot is located at Joseph Rhodes Site

2582 Half circular desk extension unit, 1600mm x 800mm - This Lot is located at Joseph Rhodes Site

2583 6 - Black leather effect chairs - This Lot is located at Joseph Rhodes Site

2584 Various office chairs - As Lotted - This Lot is located at Joseph Rhodes Site

2585 Brown and cream two drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2586 Beech bookcase - This Lot is located at Joseph Rhodes Site

2587 Sapele shelf unit - This Lot is located at Joseph Rhodes Site

2588 Wooden topped double pedestal desk - This Lot is located at Joseph Rhodes Site

2589 Sideboard unit - This Lot is located at Joseph Rhodes Site

2590 2 - Grey four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

2591 2 - Grey three drawer filing cabinets - This Lot is located at Joseph Rhodes Site


2593 Wooden three drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2594 Wooden four drawer unit - This Lot is located at Joseph Rhodes Site

2595 Grey two drawer filing cabinet - This Lot is located at Joseph Rhodes Site


2597 Beech single pedestal desk, 1500mm x 680mm - This Lot is located at Joseph Rhodes Site

2598 Beech side table, 1200mm x 600mm - This Lot is located at Joseph Rhodes Site

2599 Beech single pedestal desk with beech cantilever desk - This Lot is located at Joseph Rhodes Site

2600 Beech curved workstation, 1600mm x 1200mm - This Lot is located at Joseph Rhodes Site


2602 3 - Darkwood three drawer pedestals - This Lot is located at Joseph Rhodes Site

2603 Low down square table - This Lot is located at Joseph Rhodes Site

45


2605 Cantilever desk, 1600mm x 600mm - This Lot is located at Joseph Rhodes Site

2606 2 - Blue tweed swivel office chairs - This Lot is located at Joseph Rhodes Site




2610 2 - Beech topped office tables, 1800mm x 750mm - This Lot is located at Joseph Rhodes Site

2611

Beech desk with L-Shaped return and shelf unit plus two drawer pedestal, 1500mm x 1500mm - This

Lot is located at Joseph Rhodes Site

2612 Low tambour door cabinet - This Lot is located at Joseph Rhodes Site

2613 Brown and cream three drawer filing cabinet - This Lot is located at Joseph Rhodes Site






2619 Beech wide double drawer unit - This Lot is located at Joseph Rhodes Site

2620

Curved beech workstation with three drawer pedestal, 1800mm x 1200mm - This Lot is located at

Joseph Rhodes Site

2621 2 - Blue tweed upholstered swivel office chairs - This Lot is located at Joseph Rhodes Site

2622 3 - Blue tweed side chairs - This Lot is located at Joseph Rhodes Site

2623 Brown and cream three drawer filing cabinet - This Lot is located at Joseph Rhodes Site

2624 Sideboard and bookcase - This Lot is located at Joseph Rhodes Site

2625

Beech single pedestal desk with interconnecting return with pedestal, 2400mm x 2100mm - This Lot is


2626 Domestic fridge - This Lot is located at Joseph Rhodes Site

2627 Cantilever table, 2265mm x 900mm with four black chairs - This Lot is located at Joseph Rhodes Site

2628 4 - Black tweed side chairs - This Lot is located at Joseph Rhodes Site





2633 2 - Grey four drawer filing cabinets - This Lot is located at Joseph Rhodes Site

2634

Beech double pedestal desk, 1700mm x 800mm with beech three drawer pedestal - This Lot is located

at Joseph Rhodes Site

2635

2 - Beech curved end desk units with shelving, 800mm x 800mm - This Lot is located at Joseph Rhodes

Site

2636


Site

2637


Site

2638


Site

2639 Beech curved end desk unit with shelving, 800mm x 800mm - This Lot is located at Joseph Rhodes Site

2640 Beech eight drawer plan chest, 1300mm x 975mm - This Lot is located at Joseph Rhodes Site

2641 Grey cantilever desk - This Lot is located at Joseph Rhodes Site

2642 2 - Beech curved desk end units with shelving, 800mm x 800mm - This Lot is located at Joseph Rhodes

46

Site

2643 Light wood boardroom table, 4000mm x 1200mm - This Lot is located at Joseph Rhodes Site

47

REQUEST TO GO ON MAILING LIST FORM

Section A (Name & Address)

Company Name: ___________________________________________________________

First Name: _______________________ Surname: ______________________

Title: ___________________________________________________________

Department: ___________________________________________________________

Address: ___________________________________________________________

______________________ City/Town:

______________________

County: _______________________ Post Code:

______________________

Telephone No: _______________________ Fax No: ______________________

Mobile: ___________________________________________________________

E-mail Address: ___________________________________________________________

Section B (Categories of specific interest) Please tick the box for the categories you would be interested in receiving information on with regard to sales by auction, tender or private treaty.

Agricultural and builders’ plant & machinery ….. �

Canteen/catering plant & machinery ….. �

Cars ….. �

Ex factory stocks Please State: __________________________________________ ….. �

Fabrication equipment ….. �

Food Production ….. �

Garage equipment ….. �

Garment Manufacturing ….. �

Heavy Commercials ….. �

Heavy Industry/Plant (inc foundry, glass, ship building) ….. �

Information Technology ….. �

Injection moulding equipment ….. �

Leisure ….. �

Machine tools ….. �

Miscellaneous & Specials Please State: __________________________________ ….. �

Office equipment (furniture, computers etc) ….. �

Printing equipment ….. �

Textiles ….. �

Warehousing equipment (racking etc) ….. �

White Goods ….. �

Woodworking equipment ….. �

If you have any additional requirements or specific interests please state below:

Thank you for your time, this form can be emailed to [email protected] or post to: Richmond Asset Advisory, No. 1 Aire Street, Leeds, LS1 4PR

Documents

Quality Machine Tools - Walker Singleton