HIGH SYSTEMAVAILABILITY

RUBBER CONVEYOR BELTSRELIABLE QUALITY FOR DIVERSE CONVEYING TASKS

WE – THE TEAM OF STRICKER – STAND FOR:• professional consultation

• high-performance and innovative products

• individual solutions

• high quality and durable materials

• on-time delivery

• reliable assembly and maintenance

WE WOULD BE HAPPY TO ADVISE YOUOur staffs are available at all times for your individual questions and projects.

Stricker GmbH und Co. KG

An der Kleimannbrücke 4

48157 Münster

Phone: +49 251 3288-0

Fax: +49 251 3288-129

gummi@stricker.ms

www.stricker.ms/en/gummi/conveyor_technology/rubber_conveyor_belts

PRECISION TECHNOLOGY BULK GOODS AND PACKAGED GOODS HANDLINGOur proven and highly quality rubber conveyor belts are used for the transport of various materials and are available in different designs depending on requirements.

Rubber conveyor belts are mainly used in bulk goods and packaged goods handling such as sand, gravel, earth, stones, grain, wood or coal and are

also suitable for transporting hot bulk materials, chemicals, industrial goods, oil-containing materials and recyclable materials or foodstuffs.

Depending on the requirements endless splicing can be implemented using the hot or cold vulcanisation process or mechanical connections.

EP CONVEYOR BELTSExtremely robust for transports with heavy loads

Stricker EP conveyor belts are the ideal solution for heavy transport tasks over medium to long distances. With them even sharp and abrasive materials such as ore, gravel or rocks can be transported. For even higher loads we deliver our EP conveyor belts with transverse reinforcement.

Their cover plates are made of an extremely abrasion-proof, cut and wear-resistant rubber. This makes the belts not only stable, but also reliable and durable. The multilayer EP tension members and separation-proof intermediate rubber lining further aid this.

Stricker EP conveyor belts are antistatic and are characterized by an extremely low surface resistance and low belt elongation. They are available in widths up to 4500 mm and strength up to 2000/5 N/mm – for a particularly wide range of applications.

STEEP-ANGLE CONVEYOR BELTSPerfect transport at medium slopes

Anyone conveying bulk goods and packaged goods at a gradient angle above 20 ° achieves excellent results with profiled steep-angle belts. This makes it possible to trans-port materials such as sand, gravel, stones, earth, grain or wood as well as hot or oil-containing materials.

Stricker‘s steep-angle conveyor belts are manufactured using the cold and hot vulcanisation process and made individually according to your requirements or specifications.

The range of steep-angle conveyor belts is rounded off by elevator belts with the corresponding plastic or steel buckets.

Based on a wide range of different profiles we manufacture according to your requirements and specifications.

TECHNICAL DATA

EP conveyor belts

Strength classes 250–2000 N/mm

Bandwidth 350–4500 mm

Tension members EP

Cover plates

Cover plates thickness 0–40 mm

Temperature range

normal quality

hot material quality

super hot material quality

Cover plates quality

abrasion-proof

oil and grease-resistant

flame retardant

self-extinguishing

antistatic

Special constructions

transverse stability

cut protection

punching protection

sliding fabric

Deliverable in accordance with the applicable European and American standards. Special designs on request.

TECHNICAL DATA

Steep-angle conveyor belts

Bandwidth 400–2000 mm

Profile height 6–30 mm

Special designs on request.

AREAS OF USEpower stations

steel works

stone quarries

sand, gravel industry

cement plants

woodworking industry

recycling industry

agriculture

port and terminal technology

AREAS OF USEcoal-fired power stations

combined heat and power station and incineration plants

mining and salt extraction

iron and steel industry

sand, gravel and stone industry

cement and concrete industry

woodworking and sawmill

chemical industry

recycling, composting and processing plants

port and terminal technology

road construction

STEEL CABLE BELTSPutting coarse material and large materials in motion

Whether in mining or handling in the port, in the steel industry or in power stations – when large masses or volumes must be moved, conveyor systems with extremely robust belts are demanded.

The Stricker steel cable conveyor belts are specially designed for all transportation services under extremely harsh condi-tions. Thanks to their enormous tear strength and stability, they are very well suited for all materials with very rough structures.

We provide our steel cable conveyor belts in the qualities of X, Y, K and V. They consistently comply with the standards of DIN 22131 and ISO 15236.

ARAMID BELTSProduced with the strongest fiber in the world

At Stricker we use Aramid fibres so that even under most extreme conditions it never comes to the trial of strength between the conveyor belt and transport material.

Our Aramid conveyor belts combine all properties that enable the most demanding transports. The belts are corrosion re-sistant and extremely strong in relation to their low weight.

For special applications, we offer Aramid belts in different designs such as variants that are flame retardant, chemically resistant or particularly heat-resistant. In addition, our belts have very low creep properties.

TECHNICAL DATA

Steel cable belts

Bandwidth 650–2400 mm

Strength classes 500–2500 N/mm

Special designs on request.

TECHNICAL DATA

Steel cable belts

Bandwidth 500–2100 mm

Strength classes 630–3000 N/mm

Special designs on request.

AREAS OF USEpower plants

open-pit mining

mining and salt extraction

coal mines

iron and steel industry

port and terminal technology

AREAS OF USEpower plants

open-pit mining

mining and salt extraction

coal mines

iron and steel industry

port and terminal technology

Thanks to their high energy efficiency, you benefit from lower power consumption of Aramid belts – allowing, among other things, operation with lower power motors.

Whether the Aramid belts are used underground or above ground – they are the key to master the greatest challenges in the field of conveying.

MANUWELL BELTS WITH CORRUGATED EDGESVersatile use on all transport routes from 0 to 90 °

Whether for light, medium or heavy equipment – manuwell conveyor belts are characterized by high flexibility. They are suitable for all lines and even allow steep-angle conveyance with a gradient angle up to 90 °. This is made possible by a precise coordination of belt body, corrugated edge profile and carrier profile.

Technical details

• Belt bodies with plies made of polyester/polyamide or steel cable

• Corrugated edges in cut-resistant and abrasion-proof quality

• Carrier profile in cut-resistant and elastic quality

ADVANTAGEScustomized technical design possible

steep-angle conveyance with a gradient angle up to 90 °

fewer transfer points

long service life

low energy consumption

low maintenance

low-noise transport

low space requirement

MAGNETIC SEPARATOR BELTSPowerful protection against material penetrations

Stricker‘s magnetic separator belts are used in refuse separa-tion and composting as well as in recycling of construction site rubble and in general conveying of bulk material – areas of use which place enormous demands on conveyor belts.

Hot vulcanised breaker plates, which have been reinforced with Aramid cords, provide a highly effective long-lasting protection against material penetrations in our magnetic separator belts.

Furthermore, the stable carriers in case of wear and tear can be easily replaced without replacing the entire belt.

Technical details

• Polyester/polyamide belt body

• Reinforced TK carriers (renewable)

• Breaker plates with reinforcement made of Aramid cords

AREAS OF USErecycling plants

sorting plants

mining

SPECIAL BELTSSpecialized in the extraordinary

For particularly special transport tasks even the best standard belt does not provide the suitable result. For these cases Stricker has tailored high quality special belts in the portfolio – tailored to the individual needs in the industry.

For example, our Ripstop Belt ensures optimal conveying results even under unfavourable conditions. Straight sharp-edged transport material can cause longitudinal cracks and penetrations in the belts. To prevent this, we have equipped it with a cut protection insert – a breaker.

Whether in normal or transverse stable variant – Stricker‘s Supergrip Belts ensure that even then bulk goods are securely transported and won‘t slip. This is made possible by a surface finish, which was specifically designed for these belts and has a surface structure with a lot of grip.

Our food-compliant belts are predestined for use in the food industry, for example for the transport of sugar. They also play a vital role in the production of varnishes and paints. Of course, our belts are all FDA compliant.

We gladly support you in the designing special belt types.

AREAS OF USE OF RIPSTOP BELTSiron and steel industry

foundries

stone quarries

cement plants

AREAS OF USE OF SUPERGRIP BELTSairports

amusement parks

beverage industry

timber transport (e.g. wood chips)

parcel centres

passenger transport

24h- SERVICE +49 251 3288-0

ASSEMBLY AND SERVICEWe are available to service you 365 days of the year

To ensure your conveyors systems are always ready for use, we are available 365 days a year.

We are happy to provide also the regular inspection and maintenance of your systems. Maintenance contracts assure optimum availability of your production facilities at low operating costs.

Find out about the quality of our products, our consultation and our service. Call us or write us an e-mail. We would be happy to advise you.

DEVELOPMENT AND PRODUCTIONFirst-class products and customized solutions

Stricker is a reliable partner when it comes to minimizing downtime of your production facilities. Therefore, we are happy to provide the professional installation, maintenance and optimization of your conveyor systems.

Together with you, we develop products that are tailored to your specific needs. Experienced engineers and technicians create system-specific performance calculations to meet your individual requirements. To provide you permanently a perfect service and competitive products our production facilities are being continually adapted and developed.

PIPE CONVEYOROptimum protection for material and the environment

The Stricker pipe conveyor is conveyor belt and protection cover in one. As tubular, completely enclosed conveyor system it provides a dust and spill-free transport throughout the entire route. Thereby you protect your material from the environment – and vice versa.

Stricker‘s pipe conveyor was designed for particularly difficult terrain conditions. Due to its flexibility, it is the perfect solution for every transport route in horizontal and vertical curves. In addition, thanks to its efficient design it reduces the space requirement by up to 60 %.

Our pipe conveyor can also lower the cost. Especially companies with high environmental protection requirements avoid heavy investments in the infrastructure. And since no material loss occurs during transport, more profit remains at the end.

AREAS OF USEpower plants

cement plants

chemical industry

fertilizer industry

OUR SERVICES24-hour assembly service, 365 days a year

endless splicing of conveyor belts using the hot and cold vulcanisation process

mechanical connections

maintenance of conveyor systems

rubber coating of drums

wear protection liners

conveyor belt cleaning and centring

system optimization

maintenance work on your conveyor belt systems

on-site technical advice

SP-GT-RCBRQFDCT-01-0001-EN

Stricker GmbH und Co. KG An der Kleimannbrücke 4

48157 Münster

Phone: +49 251 3288-0 Fax: +49 251 3288-129

gummi@stricker.ms www.stricker.ms