Name

Prof. VALLURUPALLI MURALI MOHAN

B.E.(MECH), M.E. (CAD/CAM)

Designation Associate Professor

Department MECHANICAL ENGINEERING.

Date of

Joining the

Institute

13/07/1996

B.E.(MECH), NAGPUR UNIV. 1987-1991

M.E. (CAD/CAM) MNREC, ALLAHABAD, 2001

Branch /

Specialization MECHANICAL ENGINEERING/ (CAD/CAM)

Areas of

Interest

Mechanical Vibration, Optimization, MEMS & NEMS

Email muralimohanv@famt.ac.in

Personal

Homepage

link

https://scholar.google.com/citations?user=Tto2tVQAAAAJ&hl=en

Academic

Appointments

Name of the

University /

Institute/ Industry

Duration Designation

Finolex Academy

of Management

and Technology,

Ratnagiri

From 13/07/1996 to till date Associate Professor

Kavikulguru

Institute of

Technology &

Sciences, Ramtek,

MH

27/08/1991 to 31/05/1996 Lecturer

Total Experience – 27 Years

Awards / Honors / Prizes

Students projects Guided at Masters Level

1. Residual Stress Analysis in Orthogonal cutting Process on Shaper and Optimization using Taguchi Method.

2. Investigation of Corrosion behavior of High Carbon Steel in Nacl & H2SO4 3. Design of Self Refrigerator Pressure Valve by using Finite Element Analysis 4. Free Vibration Analysis of Structural Joints 5. Design and Analysis of Horizontal Pressure Vessel for Vacuum System Drain Collection Receiver. 6. Study and Analysis of Vibration Screen. 7. Design of Active Suspension System using Model Predictive Control for Quarter Car Model (In Progress) 8. Fatigue Analysis of Railway Wheels (In Progress)

M.E Projects Guided :06 & In Progress :04

Seminars/Lecture/Invited Talks Conducted

Delivered Guest Lectures 2005 To the M.S. Automotive Engineering students, Collaborative program of

Laurens Technological University, USA and International Institute of

Information Technology, Pune.

2006 To the M.S. Automotive Engineering students, Collaborative program of

Laurens Technological University, USA and International Institute of

Information Technology, Pune.

2007 To the M.S. Automotive Engineering students, Collaborative program of

Laurens Technological University, USA and International Institute of

Information Technology, Pune. 2010 To the EQUIP for Finolex Industry Employees, Ranpar, Collaborative Programof Indian School of Petrochemical & Energy Studies, affiliated to University of Petrochemical and Energy Studies

Papers Published

Papers Published in International Journals - 14

International Journals – 14

1. Undure Vedant, Patil Dhiraj, Sagar Sakharkar, V.Murali Mohan, “Experimental Optimization of Machinability Parameters in Drilling HE30 Aluminium Alloy King Pin Bush”, World Researcch Forum for Engineers & Researchers, WRFER International Conference, (WRFER -2017), Pune India, 07th May, 2017, ISBN: 978-93-86291-63-9. (Communicated & it will be published in International Journal

2. Sangram Rane, Sachin Mestry, V. Murali Mohan, “Optimization of Natural Frequency of Beam by Using Cylindrical Grooves” International Journal of Latest Engineering Research and Applications (IJLERA) ISSN: 2455-7137, Volume – 02, Issue – 05, May – 2017, PP – 69-84.

3. Sanjay B.Kulkarni, Hasim Chikte,V. Murali Mohan, “Numerical Investigation: Unsteady Flow of an Incompressible Elastico-Viscous Fluid in a Tube of Spherical Cross Section on a Porous Boundary ” , Engineering And Applied Sciences by Science Publishing Group, 2016; 1(4): pp- 66-73,dated : Received: October 25, 2016; Accepted: November 22, 2016; Published: January 4,2017. http://www.sciencepublishinggroup.com/j/eas ; doi:10.11648/j.eas.20160104.11http://article.sciencepublishinggroup.com/pdf/10.11 648.j.eas.20160104.11.pdf

4. Omkar Bhatkar, Sagar N Sakharkar, V.Murali Mohan & Raju S Pawade, “Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel”, on 1st International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2016),(Metal Cutting/Joining) 20-21 DEC-2016 at Dr. Babasaheb Ambedkar Technological University, Lonere , Maharashtra, INDIA, SPRINGER VERILOG Springer Atlantis Proceedings

5. Prasad Lawoo Mane, PROF. V. Murali Mohan, “Design and Analysis of Horizontal Pressure Vessel for Vacuum System Drain Collection Receiver”, International Journal of Pure and Applied Research in Engineering and Technology, Volume 4 (9): 153-171, IJPRET, 2016; ISSN: 2319-507X, Accepted Date: 15/03/2016; Published Date: 01/05/2016 IF: 4.226

6. Gunaji Ashok Sawant, V. Murali Mohan, Sandip Ashok Sawant, “Study and Analysis of Deck inclination angle on Efficiency of Vibration Screen” published in International Journal of Engineering Research and Design (IJERD), VOL- 4(1), pp- 631-634, ISSN: 2321-9939, 2016.I.F.:3.97

7. Sagar A. Dhotare, V. Murali Mohan, Poonam R. Chikurdekar, “Virtual Analysis of Effect of Damping in Different Material Layered Beam using Structural Joints ”, Published in International Journal of Engineering Sciences & Research Technology, IJESRT 4(12) ISSN: 2277-9655, December 2015. Scientific Journal Impact Factor: 3.785 (ISRA), Impact Factor: 1.852

8. Sanjay B Kulkarni, Hasim Chikte, V. Murali Mohan,“ Numerical Investigation of Unsteady MHD flow of Second Order Fluid in a tube of Elliptical cross section on porous boundary ”

published in International Journal of Mathematical, Computational, Physical, Electrical and Computer Engineering, published by World Academy of Science, Engineering and Technology,p-559-567,Vol:9,No:9,2015. http://scholar.waset.org/1999.7/10002783.

9. Prasad Mane, V. Murali Mohan, “Design of Horizontal Pressure Vessel for Vacuum System Drain Collector Receiver” published in International Journal for Scientific Research and Development, IJSRD Vol.03, Issue -09, ISSN (Online): 23210613 November, 2015. I.F:2.39

10. S. A. Dhotare, V. Murali Mohan and P.R. Chikurdekar, “Virtual Analysis Of Effect Of Damping In Layered Beam Using Different Structural Joints”, published in International Journal Of Innovations In Mechanical And Automotive Research, Vol. 1, Issue 4. ISSN: 2395-4493, April, 2015

11. Gunaji Sawant, V. Murali Mohan, “ Dynamic Analysis of Vibration Screen”, International Journal for Innovative Research in Science and Technology (IJIRST), VOL-02,Issue :06, NOV-2015, ISSN online :2349-6010. IF:3.359

12. Prasad Mane, V. Murali Mohan, “ Effect of Multilayered Disc size & Micro Sized Gap on MRF Clutch ” International Journal of Research in Advent Technology, Vol.3, No.2, February 2015 e-ISSN: 2321-9637. I.F:2.69

13. Manchekar N., V. Murali Mohan,“ Design of gradual flow of reducing valve by using FEA ”, IJESR, June 2013, Vol 3/ Issue 6, pp. 257-267 e-ISSN 2277-2685, p-ISSN 2320-9763 I.F.: 3.47

14. Bhatkar Omkar, V. Murali Mohan, “Residual stress analysis in orthogonal cutting process in shaper & optimization using Taguchi Method”, ARAI, Intralink.

Papers Presented/Published in National/ International Conferences - 14

International Conferences – 11

1. Undure Vedant, Patil Dhiraj, Sagar Sakharkar, V.Murali Mohan, “Experimental Optimization of Machinability Parameters in Drilling HE30 Aluminium Alloy King Pin Bush”, World Researcch Forum for Engineers & Researchers, WRFER International Conference, (WRFER -2017), Pune India, 07th May, 2017, ISBN: 978-93-86291-63-9.

2. V.Murali Mohan, Sagar Dhotre, Punam R Chikrudekar, “Effect of Damping in Layered Beam Using Structural Analysis ”, 2nd Biennial International Conference on Nascent Technologies in Engineering ,( ICNTE 2017), Fr. C. Rodrigues Institute of Technology, Vashi, Navi Mumbai, India January 27-28 2017.

3. Omkar Bhatkar, Sagar N Sakharkar, V.Murali Mohan & Raju S Pawade, “Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel”, on 1st International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2016),(Metal Cutting/Joining) 20-21 DEC-2016 at Dr. Babasaheb Ambedkar Technological University, Lonere , Maharashtra, INDIA, (PROCEEDINGS)

4. Sagar Dhotare, Punam Chikurdekar, Sagar Sakharkar and V. Murali Mohan, “Free Vibration and Structural Analysis of Joints”, ”, on 1

st International Conference on Materials, Manufacturing and

Design Engineering (iCMMD-2016),(Vibration and Finite Element Method) 20-21 DEC-2016 at Dr. Babasaheb Ambedkar Technological University, Lonere , Maharashtra, INDIA,(PROCEEDINGS)

5. Sagar Dhotre, V. Murali Mohan, Poonam Dhotre, “ Effect Of Damping In Layered Beam Using Structural Joints”, International Conference on Sustainable Computing Techniques in Engineering, Management and Science to be held on 9th - 10th , September 2016 at Hierank Business School, Noida, India (Communicated & Accepted).

6. Prasad Lawoo Mane , V.Murali Mohan, “ Design and Analysis of Horizontal Pressure Vessel for Vacuum System Drain Collection Receiver” 4TH INTERNATIONAL CONFERENCE ON EMERGING TREND AND RESEARCH IN ENGINEERING,TECHNOLOGY AND SCIENCES, 31-03-2016

7. Sagar Dhotre, V. Murali Mohan, “Study of Effect of Damping in Layered Beam Using Different Structural Joints” Proceedings of International Conference on “Ethical Prospects: Economy, Society & Environment (ICEPESE-2015)”, Sr No :126, Page No:591, , University of Mumbai, 13th & 14th March, 2015.

8. V. Murali Mohan, Suraj Patinge, Rahul Phadake, “ Numerical Investigation of a Nano-Cantilever Based Mass Sensor for Explosive Detection”, Proceedings of International Conference on “ Ethical Prospects: Economy, Society & Environment (ICEPESE-2015)”, Sr No :126, Page No:591, , University of Mumbai, 13th & 14th March, 2015.

9. V. Murali Mohan, Dr. Mishra P. K., “Micro/ Nano Mechanical Cantilever as Chemical and Biological Sensors”, International Conference of World Physics, Rajasthan University, Rajasthan, INDIA, 2005.

10. V. Murali Mohan, Dr. Mishra P. K., “Micro Fabrication Techniques to create Micro and Nano Mechanical Components For Science, Technology and Research Organizations”, International Conference of World Physics, Rajasthan University, Rajasthan, INDIA, 2005.

11. V. Murali Mohan, Dr. Mishra P. K., “Micromechanical Cantilever Sensors: For Science and Engineering Applications”, International Conference on Emerging Technologies (ICET), KNIT, Bhubaneswar, INDIA, 2004.

National Conferences – 03

1. Gunaji Sawant, V. Murali Mohan, “Review Paper on Factors affecting Efficiency of Vibration Screen ” Proceedings of the 2nd National conference on Recent Advances in Science and

Technology, 17-18 February 2016, ISBN 978-93-83046-31-7, at FAMT, Ratnagiri. (This paper is published in International Journal)

2. S. A. Dhotare, V. Murali Mohan and P.R. Chikurdekar, “Virtual Analysis Of Effect Of Damping In Layered Beam Using Different Structural Joints” presented in National Conference on “Innovation In Mechanical Engineering" Organized by MIT Academy of Engineering, Pune, April-2015.

3. V. Murali Mohan, Dr. Mishra P. K., “ Micromechanical Cantilever: A Biosensor in Bio- MEMS”, National Conference on Advances in Mechanical Engineering, JNN College of Engineering, Shimoga, Karnataka, INDIA, 2004

Book publications : 03

1. Sagar Dhotare, Vallurupalli Murali Mohan, Punam Chikurdekar, Title of the Book “Free Vibration Analysis of Structural Joints”, Published by LAP LAMBERT Academic Publishing GERMANY Published on: 2016-10-05. (ISBN13: 9783659963278, ISBN10: 3659963275 , EAN: 9783659963278) (Published on: 05th OCT, 2016).

2. Omkar Prabhakar Bhatkar, Vallurupalli Murali Mohan, Title of the Book “Residual Stress

Analysis in Orthogonal Cutting Process ”, Published by LAP LAMBERT Academic Publishing GERMANY, Published on: 2016-11-17. (ISBN-13: 978-3-330-01015-4 , ISBN-10: 3330010150 , EAN: 9783330010154) (Published on :17th Sep, 2016)

3. SagarSakharkar , Vallurupalli Murali Mohan , Vedant Undure “Optimization of

Machinability Parameters using RSM and SEM ” Paperback – 5 Jun 2017 ” Published by LAP LAMBERT Academic Publishing GERMANY, Published on:2017-06-05 (ISBN-10: 3330319739 , ISBN-13: 978-3330319738)

Number of Workshops, Seminars, STTPs, FDPs Attended – 11

1. Coordinator for Two Day Certified online E-Training Program on “STEPS 2 RESEARCH” by IITB & AMAL JYOTHI INSTITUTE OF TECHNOLOGY, KERALA on 19th &20th SEP,2014.

2. Organized Two Day Certified Training Programme on “Data Acquisition Using LABVIEW” for ME Semest –II and B.E. project Batches organized at Finolex Academy Of Management & Technology, Ratnagiri on 14th & 15th March 2014.

3. Participated , Two Week ISTE Sponsored Workshop on “Engineering Mechanics” organized by Indian Institute of Technology, Bombay under National Mission on Education through ICT (MHRD), on 26th &06th December, 2013.

4. Participated Two Week ISTE Sponsored Workshop on “Engineering Thermodynamics” organized by Indian Institute of Technology, Bombay under National Mission on Education through ICT (MHRD), on 11th &21st December, 2012.

5. Participated Two Day ISTE sponsored workshop on “AKASH for Education” organized by Indian Institute of Technology, Bombay under National Mission on Education through ICT (MHRD), on 10th &11th November, 2012.

6. Participated Two Day I2IT & ANSYS sponsored Symposium SONIC ,06 on “Novel Ideas in Computational Fluid Dynamics” organized by I2IT, Hinzawadi, Pune, on 22nd &23rd September, 2006

7. Participated Two Week AICTE sponsored work shop on “Induction Training Programme” for staff development scheme Organized by Department of Mechanics, Motilal Nehru National Institute Of Technology, Allahabad, UP on 15th Dec to 26th Dec, 2003.

8. Participated Two Days work shop on “Introduction to GNU/Linux Environment for Engineering / IT Education” organized by Computer Technology Department, VJTI, Matunga, Mumbai On 20th & 21st October, 2001.

9. Participated Two Week Department of Science & Technology, New Delhi Sponsored Ist SERC School on “Precision Engineering” organized by Department of Mechanical Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India on 14th May to 23rd May, 2001.

10. Participated Two Week AICTE-ISTE Sponsored Winter School on “Image Processing, Vision & Robotics” Organised by Design Center, Motilal Nehru Regional Engineering College, Allahabad, UP, on 21st Nov to 30th Nov, 2000.

11. Participated Two Week AICTE-ISTE Sponsored Winter School on “Corporate Planning And Policy Design” organized by Department of Mechanical Engineering , College of Engineering, Andhra University , Visakhapatnam , AP, India on 29th Dec, 1997 to 10th Jan, 1998.

Professional Membership

1. Life Member (LM 56174) of The Indian Society for Technical Education, 2008

Other work, if any

1. Demonstrated FOLDING BICYCLE a project of BE final Year students during I2IT Inaugural function dedicated to the Nation on the hands of Honorable President Dr. A.P.J Abdual Kalam on MAY,2003

2. October, 2011, Appointed as In-charge Principal, Finolex Academy of Mgmt & Technology,

Ratnagiri

3. Appointed as Head of the Department office Order :FAMT/CIR/212/2005 dated 10th January, 2005

4. Convener for National Conference on “Advances in Heat and Mass Transfer (AHMT-09)”

organized by FAMT ISTE Chapter, Department of Mechanical Engineering, Finolex Academy Of Management & Technology, in association with International Institute of Information Technology (I2IT), Pune on 30th & 31st October, 2009.

5. Appointed as a Project Convener for Conduction of Project Oral/Practical at BE(Semester

VII & VIII) Old & Revised Course of Department of Mechanical Engineering , Finolex Academy Of Management & Technology, From years 2006-2012

6. Appointed as Joint Chief Conductor for University of Mumbai Examinations for a period 13th May to 31st May, 2014 at Rajendra Mane College of Engineering AMBAV, Devruk : Office Order: COE/33/2014 dated 10th May, 2014

7. Participated annual Convention at KH SOMAYYA Higher Education Forum (HEF’s 6th) Annual Convention 2015 14th March, 2015

8. Course Coordinator, B.Tech Petrochemical Eng. for Employees of Finolex Industries Ltd,

Ranpar, Maharashtra, under Educational Quality Improvement Program (EQUIP), by Indian School of Petrochemical and Energy ISPE) and University of Petrochemical & Energy Studies, Uttaranchal

College Exam Duties

1. Chief Conductor, Examinations of Mumbai University at Finolex Academy of Management

&Technology for two times. 2. Worked as a Senior Supervisor of University 2014 Winter Exam.

3. Appointed as a Senior Supervisor for conducting Evening Session University Examinations

First Half of 2008. Office Order : FAMT/EXAM/OFORD/84/2008 dated 17/04/2008

4. Carried out exam related duties such as Paper Setter, Moderator, Examiner and External Examiner for conducting theory, practical and oral exam as appointed by Board of Examination, Mumbai University.

5. Appointed as a Project Convener for Conduction of Project Oral/Practical at BE(Semester VII & VIII) Old & Revised Course of Department of Mechanical Engineering , Finolex Academy Of Management & Technology, From years 2006-2012

Other Experience

College Level Committees

1. Working as a NAAC Criteria 01 Head at Institute Level.

2. Working as a Warden for FAMT Hostels

3. Working as a Member in Facility Center for First Year Admissions

4. Worked as Institute level organizing committee member in 2nd National Conference on “Recent Advances in Science and Technology”.

5. Working as a Coordinator for Academy Canteen Monitoring Committee.

6. Working as a Coordinator for M.E. Project & Seminars.

7. Working as a member of Anti Ragging Committee.

8. Working as a IQAC member.

9. Working as a M.E. Coordinator.

10. Working as a Faculty Coordinator for ECOKART

Subject Taught

Sr.

No. Name of the Subject Year/Branch/Semester Experience

1. Engineering Drawing F.Y. Engineering SEM-II 15 Year

2. Engineering Mechanics F.Y. Engineering SEM-I 01 Years

3. Object Oriented Programming Using C

++ S.E MECH (Sem - IV) 04 Years

4. Machine Drawing S.E MECH (Sem - IV) 05 Years

5. Data Structures T.Y. MECH. (Sem - V) 03 Years

6. Machine Design T.Y. MECH. (Sem - VI) 01 Year

7. Mechanical Vibration T.Y. MECH. (Sem - VI) 02 Years

8. Finite Element Analysis B.E. MECH (Sem - VII) 12 Years

9. CAD/CAM/CIM B.E. MECH (Sem - VIII) 12 Years

10. Mechanical Vibration M.E. M/C Design(Sem - I) 07 Years

11. Optimization M.E. M/C Design(Sem - II) 07 Years

Faculty In charge to ECOKART SERIES -2017, Secured 15th Position in All India Level

out of 105 participants, Competition held at New Delhi

Team Matadors achieved 15rd

rank amongst 104 teams from colleges across the nation.

ECOKART SERIES 2017 is India’s first ever pure Electric kart racing championship held at BML

MUNJAL UNIVERSITY on 28th

Feb – 3rd

of March 2017 at Haryana.

Demonstrated FOLDING BICYCLE a project of BE Final Year students during I2IT Inaugural

function dedicated to the Nation on the hands of Honorable President Dr. A.P.J Abdual Kalam

held on MAY,2003

Demonstrated FOLDING BICYCLE a project of BE Final Year students during I2IT Inaugural

function dedicated to the Nation on the hands of Honorable President Dr. A.P.J Abdual Kalam

held on MAY,2003

ELECTRIC NATIONAL KART RACING CHAMPIONSHIP 2017 powered by VIRTUALIS

MOTORSPORTS held on 29th September to 3rdOctober, 2017 at Radharaman Institute of

Technology & Science and RPM International Track, Bhopal, Madhya Pradesh.

the team METADOR’s achieved overall 3rd

All India rank in the event along with maneuverability award.