2313 W Sam Houston Parkway N Suite 105 Houston, Texas 77043www.ROKProtectiveSystems.com

ROK Solid Application Instructions, ROK SOLIDROK Solid is a non-toxic, granular hydro-carbon remediation system. ROK Solid adsorbs (not to be confused with absorbing), hydro-carbons, meaning that hydro-carbons cling to the outside of the granular particles, not to be confused with absorbing.

There are two types ROK Solid, a dry granular system, and ROK Solid XS, a wet or slurry system.

ROK Solid cleans up:

Oil and other hydro-carbons

None required for ROK Solid

Items and Tools Required for Installation

2313 W Sam Houston Parkway N Suite 105 Houston, Texas 77043www.ROKProtectiveSystems.com

Application Instructions

Typically ROK Solid can be dispensed by hand. For best results, use 1 part ROK Solid to 8 parts hydro-carbon spill.

Step I

Distribute ROK Solid onto spill in a

uniform pattern.

Step II

Continue to dispense ROK Solid onto spill

Until entire surface of spill is covered.

Allow ROK Solid coated hydro-carbon spill

To adsorb for 5 minutes §

§ Allow a minimum of 5 minutes for adsorbing. Larger spills may require longer times.

2313 W Sam Houston Parkway N Suite 105 Houston, Texas 77043www.ROKProtectiveSystems.com

Step III

Once adsorbing has taken place, ROK Solid will begin to take on the color appearance of the spill. At this time, agitate the ROK Solid coated spill to ensure that the complete spill is contained by the ROK Solid.

Step IV

ROK Solid coated hydro-carbon spill can easily be cleaned, using a common broom and dustpan.

Ensure to dispose of hydro-carbon according to local, federal, and state regulations.