After making wakeboards for the past 20 seasons, we have never had more fun as this last year – our 4th with Ronix. We sessioned the recession with you on our 5 gallons of freedom tour, one of our owners landed a 1260, we built some new rails in our backyard at Radar Lake for the upcoming Parks Documentary, we came up with 20 new shapes, a whole new way of making a wakeboard, and a complete new line of even more environmentally friendly custom orthotic footwear. We proved that a high-end pro shop specific brand works.

Thank you for making us the fastest growing wakeboard company,

- Ronix

apreviewofthingstocom

e.com ·

03

STARTING OUT STRAPPING INTO BUNGEES, RIDING

A PHASER EQUIPPED, DIRECTIONAL SHAPE, TRI-FIN

POWERED SPECIAL. THRU TIME – ADMIRED, MOCKED

AND MIMICKED - UNTIL EVENTUALLY THE MARKET WAS

MARKETED WITH CONFUSION. WHICH LEAVES US HERE…

A CLEAN SLATE - AND FRIENDS WITH A SIMILAR SOUND.

A NON VENTING VENTURE OF ARTISTS, ENGINEERS,

RIDERS AND OTHERS AS OWNERS MAKING RIDING

DEVICES COLLECTIVELY CRAFTED FOR THE IMAGINATION

OF WAKEBOARDING. OUR AXIOM WILL ALWAYS BE BASED

ON PRODUCTS AND TALES OF TOMORROWS RIDING. A

CHANCE TO MAKE A POINT, CONFRONT THE NORM, AND

ANSWER THE QUESTION WHY.

We reserve the right to change details without notice - but you’re clairvoyant, you’ll figure it out.

Ronix warranties vary upon country.

Sizing is just a recommendation, we encourage you to try out our products first. Support your local pro shop. Square One Distribution Company 30200 SE 79th Street Building 110 Issaquah, WA 98027 Phone: 1 888-RONIXCO Phone: (425) 369-6850 www.ronixwake.com Photography by: www.billdoster.com Spencer Smith

www.kastdesignco.com - design & studio photography

WHAT IS IT?This expensive fiber has a high tensile strength, lower overall weight and low thermal expansion. WHAT DOES THAT DO?Thousands of carbon fibers are twisted together and then eventually woven into a fabric.

A. This makes a much stronger layup than a traditional fiberglass constructed board.

B. These properties are less likely to break down, but they are also much lighter with reduced swing weight in our new boards.

C. Ride the board the way it was intended to be ridden. Each board is handcrafted with a very specific rocker line. From the transition, to the trough/peak of the wake and landing there is so much energy taking place stressing a board out of its intended shape. 4 reinforced strips of carbon located on the top and bottom help a board keep its original shape. This means a cleaner take off every time you leave the endless kicker.

WHY A DIRECTIONAL LAY UP ON SOME OF THE NEW BOARDS?Over the years, there has been so much talk about 3-stage vs. a hybrid continuous rockerline. Riders with more of a knees bent crouched position and their weight more equal across the tip and tail usually ride a 3-stage rocker with a big flat spot in the center of the board, known for a huge initial abrupt straight up and down pop. A hybrid rocker usually has a very subtle flat spot and has more of a continuous arc from tip to tail. This style of rocker carries more forward momentum up the wake, and is capable of landing further out into the flats. Riders that prefer this shape usually ride with their weight further back on the tail of the board. This is why we have 3 different Directional R3 series with 3 different Carbon locations. Putting the snap where you need it the most…

Want a longer, stiffer ride with more snap in your session?(Get your mind out of the gutter – we are talking about this lively new creation) For the past couple of seasons, Parks Bonifay, Danny Harf, and Chad Sharpe have been experimenting with different constructions of carbon woven layups in their pro models. For 2010 the Ibex, One and Viva collection all come with our new Rider, Response, Reinforcement technology.

IBEX (3 Stage) – Centered Location (A)

ONE (Subtle 3-Stage) – 5.5” Back from Center (B)

VIVA (Hybrid) – 11” Back from Center (C)

This doesn’t mean that you have to ride the Ibex with your weight perfectly even, the Viva all the way back on the tail and the One 1/2 way in between. This just stiffens and reinforces the board in that area.

DANNY HARF RIDING THE SYSTEM 2.0 · www.wakeparkproject.com

(A)

(B)

(C)

DIRECTIONAL R3

TECHNOLOGY

plasmaticproportionsofscientificsculptures.com

·

05

KRYPTO CABLEDifferent fibers are brewed up, and then woven together to make a compound stronger than any sidewall material we have ever tested. The Krypto Cable (blue dot in cross section) surrounds the profile of the board and is fused together with our new Mod Pour.

Strength – Combined with our monocoque laminated glass (yellow lines in cross section) this cable makes the sidewalls of the board the strongest part of the board – not the weakest.

Flex – Combined with the strength of our new Mod Pour foam, and our new Directional R3 technology means a board will want to maintain its intended rocker line thru a transition, trough, and landing impact beyond a conventional layup. A new, torsionally stiffer ride allowing the board to create more angle and speed out of a turn by preventing the profile from flexing side to side.

Available on:Ibex, One, Viva, Bill, Mana, Faith Hope Love, Dahlia, Vision, August, and the Cortez series.

SINTERED BASEThe most durable non stick base material we have ever tested on rails without loosing any glide speed on the water. Our exclusive base was formulated from a powder by heating the material in a sintering furnace below its melting point until the particles bond to one another. A higher purity of a compound that preserves its bond over time. No obstacle is safe at cable parks with our new jib friendly base material. (pink bottom in cross section)

Available on:Red One, and Bill series.

Comes Optional with:Ibex, Viva, and White One series

THE MOD POURA stiffer, lighter pour - This demanding alternative core is new for this year made from our exclusive blend of carbon and atoms. A new exclusive blend for 2010 setting the standard of the most refined concoction of foam out there.

Available on:Ibex, One, Viva, Bill, Mana, Faith Hope Love, Dahlia, Vision, August, and Cortez series.

ALL TERRAIN VERSATILITY CONSTRUCTION

FINSRAMP SERIES – Designed with a longer running length for a solid edge hold, but the slopedback profile still allows for a quick release off the wake.AVAILABLE IN:glossy black fiberglass .8” / 1.0” / 1.2”glossy black alumimum .8” / 1.0”metallic silver fiberglass .8” / 1.0”

HOOK SERIES – Created with additional surface area in the back profile of the fin for increasededge hold up the wake. Works better for wake surfboards and recreational level wakeboardersAVAILABLE IN:glossy black fiberglass 1.75” wake editionglossy black fiberglass 2.5” / 3.5” surf editionglossy white fiberglass 1.75” / 2.5” / 3.5” surf edition

SLIDER SERIES – A fin actually designed to be sessioned on rails. Wider profile, flatter bottomsurface, and a durable construction ready for any obstacle in its path.AVAILABLE IN:glossy black fiberglass .8”metallic silver fiberglass .8”

SKATE SERIES – Reed Hansen’s signature skate fin shape. Low profile, sloped ramp profile offers enough edge hold for his wake to wake backside 540’s but can still release super clean on lip tricks.AVAILABLE IN:matte black fiberglass .8”

FLEXMETER

TOOL LESSHARDWAREThrow your screwdriver away with our new tool less mounting system. Standard with every new pair of boots. The last thing you need on your boat is another tool.

Every Ronix boot is geared towards a different consumer. Some riders want a board/boot set up that reacts as quickly as they can control it. Others want the flex and freedom of our softer boots. We have rated all of our boots from a 10 – 1 scale to make your choice easier.

– Stiffer/Responsive

– Softer/Mobility

10

1

9

8

7

6

5

4

3

– Cell

– One/Kai OT

– Frank/Kai CT/Halo

– Relik/District/Faith Hope Love

– Divide/Vision

– Luxe

– August

The feetbelt seats your foot in the correct position in the boot by drawing your foot into the heel pocket. These float free of the outer shell to conform to the exact dimensions of your ankles. Heel hold down to a whole new level - don’t worry you won’t get pulled over if your feetbelt isn’t buckled.

The only separation between a rider’s foot and a Ronix board is our new high impact shock absorbing footbed. Over the last four seasons our engineers have been designing, testing and tweaking a new patent pending baseless system. A system that makes our boots 1/3 lower in height and lighter – who doesn’t want the best in boot to board response and a lighter setup to throw in the boat? Our new super rigid chassis mounts to our universal board 6” hole pattern reducing heel/toe lift and maximizing energy transfer.

BASELESS

FEET BELTS

1/3 LIGHTER1/3 LOWER

ron

ixfootw

ear.c

om

·

07

RONIX ECOLOGY

HEAT MOLDED CUSTOM FIT

DOUBLE LASTED

PART 1

PART 2

Yes, our new line of footwear is a lot lighter and lower to the board than most, but we are also eliminating the use of PVC solvents which are potentially hazardous to the surroundings and human health. Instead, we are using more expensive, higher quality materials that are easier on the environment. In addition, the shell of the open and closed toe Kai Boots are made from recycled water bottles.

Water bottles are made from a polymer called PET, which has created the relative abundance of post-consumer waste in the form of plastic bottles. Over 60 million bottles are thrown away per day, which then can take over a 1,000 years to biodegrade. We figured we should make some wakeboard boots out of them instead. The Kai series features a new synthetic leather recycled from your favorite 16.9 oz natural spring container.

For the 2010 season, we proudly have 15 new eco friendly kicks for a greener tomorrow.

Building a last of a wakeboarder’s foot and simulating the movement while riding is the most important step in creating boots that fit properly. A last is an aluminum cavity that replicates every component of a foot determining the shape and size of the liner and a finished boot. This foundation is developed through an extensive R&D process based on what we determine will produce the best in fit and performance. Double lasting creates an exact fit from your foot to the shell of the boot for the best in comfort and response. We use the most compact and low profile lasts to reduce bulk and eliminate any unnecessary material.

Our first unique lasting process is molding the liner around a last designed to the shape of an actual foot and leg. This step ensures the inside of the liner will have a great fit right out of the box. These are formed inside an actual shell to create the perfect net fit between liner and boot.

The second part of our lasting process is molding the inside of the shell. This creates a liner to shell coupling that eliminates any “dead space” or “hot spots”. After the second lasting, the previously molded liners are inserted into the shell and the boots are ready to ride.

Lightweight, preformed, heat moldable Intuition liners just fit better right out of the box and custom mold unlike any other type of moldable boots out there. Ronix exclusive Intuition wake liners have set the standard for performance driven, comfort footwear. 5 minutes on the cooker at your local shop customizes a pair of boots to the exact shape of your foot for a lifetime. Flat foot, high arch, narrow heel, or cankles – whatever the dimension of your foot, our liners were made to be cranked up to 120 degrees Celsius and custom cooled to a rider’s hoof. Intuition foam can also be re-heated and molded more than once without damaging the structural integrity or quality. The ultimate in high quality liners, resistant to packing out. Now you have an excuse why you don’t have to share your custom orthotics.

Half sizes can be accomodated with our custom fit process. The properties of Intuition foam allow the liner to expand and contract to the shape of your foot, allowing any pressure points or dead spots to be eliminated. The characteristics of this foam will accommodate any type of fit that you choose. A rider with a larger foot in a smaller boot will pack the foam to be thinner, yet more responsive. Likewise, a smaller foot in a bigger boot will allow the foam to expand more and create a softer, more forgiving boot.

09

RELIK REFLECTO BOOT The elusive Reflecto edition signature Parks boot was poured from the same mold as the Relik (see next page) - with a plasmatic portion of alloy. Chrome foiled shell, woven steel mesh, and our signature baseless hardware forge an untouchable masterpiece. Equipped with an autographed chronicle of the life and times of Mr. Bonifay and a collectable wood crate, on the outside chance that you can get your hands on a pair. Stay tuned in 2010 for the few pairs dropping at exclusive Ronix dealers…

It took 27 years, locations all over the world and the last half a decade in production … but the Parks Bonifay Documentary is finally here. This tale of a man, his unconventional youth and unbelievable adulthood, flirting with disaster and challenging life, the triumphs of winning everything in sight, and tribulations of incomprehensible injuries, the considerable fun, unexpected pain and the pressure all add up to one thing: his movie. Come along as the life of an extraordinary athlete and his incredible family unfolds before you. It’s a life worth seeing; from the time when we watched helplessly as the sports’ greatest all-time athlete almost drowned in three feet of water, to a broken steering cable on a rickety film boat bobbing in the Teahupoo channel, to the historical footage of the world’s youngest rider on the water. The story of Parks Bonifay brings both never seen before mind blowing content and the untold story of the most highly acclaimed athlete in our sport. Join him for the ride.

“We’ve got so much footage, not only of me, but of my parents skiing when they were 15-20, and even of my grandparents skiing in 1942 hitting a janky-ass ski ramp. When you see this you’re going to see a pretty cool story. People will walk away with a lot more than just my story, they’ll have a grasp of how wakeboarding fit into waterskiing, how waterskiing kind of came about, and about how the Bonifays fit into waterskiing before I was even born.”- Parks Bonifay

“...The Bonifays, they’re crazy! Each one of them has a unique, crazy gene. From watching some of the old footage you’re just like, ‘What the hell were they thinking?!?’ You see Pete (Parks and Shane’s dad) almost die multiple times doing some crazy stunts and you kind of get an idea where Parks came from.”- Keith Kipp, Director

“This is an incredible story of both athlete and family. Literally, Parks has been in the media spot light since he was six months old, and the new footage that is exclusive to this movie will illustrate why he is still the sport’s biggest name.”- Bill McCaffray, Publisher, Alliance Wakeboard Magazine

11

ron

1x.c

om

·

IBEX BOARD For years, Parks has been synonymous with big rocker lines that have a super late kick. A signature rocker that gave Parks a straight up and down snappy pop earning him the coveted legendary award by wakeboarding magazine. Our new 2010 Ibex series has less rocker than any shape Parks has ridden in the last ten years, but has way more total surface area than any other Ronix deck. So instead of having that vertical snap with an abrupt 3-stage, Parks has mellowed out his new ride with a faster, cleaner take off, and more stability on and off the water with a shape that is 1” wider in in the tip/tail with added glide requiring less effort to get speed. All the while, our engineers experimented with a more forgiving center variable rail, without loosing feel on the water. Still one of the strongest edging boards in our line up with increased effective edge into the wake from the new longer channels, and wider cupped rails.

× Center variable edge – a sharper rail and a softer bevel create a controlled accelerated edge transfer with a forgiving bottom design × Tip/Tail variable edge – a more vertical rail allows the end of the board to ride higher on the water and prevents the board from burying the edge on big cuts with a sharper bevel for quicker response into a turn × Thin profile reduces swing weight × A clean bottom design - the board lands with more natural forward momentum so we can use cleaner bottoms × Widest profile – with this much surface area we balance it out with more sidecut than the rest of our boards for the right amount of effective edge in the water × Directional R3 Technology – ride the board the way it was intended to be ridden with the carbon maintaining the original rocker line × Krypto Cable- makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × Sintered Base – the most durable non stick compound we have ever tested on rails without loosing any glide speed on the water × Artwork – screened brushed chrome top/reflective chrome ink/1 metal logo emblem/1 metal icon emblem × 4 fiberglass 1.0” fins and 4 fiberglass .8” slider fins (slider fins come with sintered base option only) × Parks Bonifay approval - with the largest sweet spot of any signature board he’s ever ridden

OPTIONAL

ron

1x.c

om

·

13

FLEX 6

RELIK BOOT Our lightest heat formed custom fit boot tips the scale at 1.6 lbs built on our revolutionary baseless plate system. The Relik boot is designed for riders that want the most mobility out of a closed toe boot. A lower cut boot, using a perforated liner and lightweight shell material for the most side to side latitude. Parks Bonifay’s custom orthotic freestyle inspired signature footwear has more lateral freedom without sacrificing heel hold down. No excuse for compromised style with the freedom of a pair of new Relik boots.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Intuition Liner - preformed heat moldable - the ultimate customizable liners × Our softest density liner is also perforated - offering the most mobility in a high-end boot × Made from wakeboard specific lasts – not a guess × Double lasted with the most low profile and compact lasts eliminates excess material and delivers optimal energy transfer between boot and board × Removable J-bars customize your heel pocket × Feetbelt – secures your ankle and maximizes heel hold × R.A.D. foam- radder dampening than ever × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Ridden by Parks Bonifay

15

RIDING STYLE Danny Harf’s freeride legend was the start of variable rails with smoother transitioned turns and a classic 3-stage rocker lift off the kicker. The One series surf inspired rail design, rides higher on the water with less friction and a relaxed overall feel. The best selling series in our line is made strong enough to take the impact of Danny’s 1260 with our new Mod Pour foam, Directional R3 Technology, Krypto Cable, and a optional jib friendly Sintered Base.

dannyharfsidea.com ·

15

ONE BOARD The One shape pioneers the evolution of variable rails. Shallow molded fins, forgiving angled bevels, and a fuller mid rail set the pace of this mellower freeride inspired shape. As a rider’s weight shifts back, the variable rail transitions to a sharper rail and bevel in the tail – so the board can hook up with a strong, predictable edge up the wake every time. Last season, Danny switched out his rocker to a speedier 3-stage kick and landed a historic switch toeside 1260 days after jumping on his new shape with the additional momentum off the transition. The reduced friction on the water will let any soul turn connoisseur upgrade their travels off the kicker - available in an alternative color.

× The round rails thru the center with a new angled bevel prevent that all too familiar edge catching a digger, and create an even mellower transitioned carve × Thin profile reducing swing weight × Clean center bottom design – leaves the wake and lands with more forward momentum so there is no need for big channels to reduce the impact on landings × New side vents – for a stronger grip up the wake × Directional R3 Technology – ride the board the way it was intended to be ridden with the carbon maintaining the original rocker line × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × Sintered Base – the most durable non stick compound we have ever tested on rails without loosing any glide speed on the water × Artwork – screened UV clear top/2 – 2 piece black chrome Ronix emblem /2 gold foils/pearl and flake metallic ink × 4 fiberglass 1.0” fins and 4 fiberglass .8” slider fins (slider fins come with sintered base option only) × Danny Harf designed and endorsed

OPTIONAL

17

ONE BOOT The boot that put Ronix on the map - Danny Harf’s medium density heat formed and custom fit Intuition lined signature boot. The One boot enters season 4 in 2 color ways with our super lightweight anti-heel lift baseless system. Just stiff enough to have board response for a session of quick soul turns and the mobility required for a legit method grab.

× Ronix’s patent pending baseless system makes this boot roughly 1/3 lighter and lower in height for increased board control × Intuition Liner - preformed heat moldable - the ultimate customizable liners × A medium density liner blending mobility and precision board control × Made from wakeboard specific lasts – not a guess × Double lasted with the most low profile and compact lasts eliminates excess material and delivers optimal energy transfer between boot and board × Removable J-bars customize your heel pocket × Feetbelt - secures your ankle and maximizes heel hold × R.A.D. foam - radder dampening than ever × Throw your screwdriver away with our new tool less mounting system × Eco Innovation - no use of PVC solvents × Corrosion resistant magnetic lace cover × Ridden by Danny Harf

dannyharfsidea.com ·

FLEX 8

DANNY’S ONE COLLECTION WILL ALSO BE AVAILABLE IN RESTRICTED QUANTITIES OF

THIS ALTERNATIVE COLOR WAY. SAME FREERIDE PERFORMANCE AND

HEAT MOLDABLE FIT – JUST A LITTLE MORE SCARCE.SEE PAGE 16 & 17 FOR RIDING STYLE, FEATURES AND SIZING.

dannyharfsidea.com ·

19

In recent years, a lot of products have made the switch to “offshore” manufacturing – a cheaper and easier way for some companies to do business. In

December of 2005, Ronix Wakeboards was founded with some of the biggest pioneers and riders all as owners with a simple question – who does it the best?

For 2010 Ronix has all new board technology with 20 brand new shapes, and a redesign of our industry leading line of footwear. Some of the products we make

up at our lab - Radar Lake. Other products are made in other regions of the USA, New Zealand, Netherlands, Germany, Austria, Switzerland, Asia, Canada and

Italy. We have a R&D crew with over 100 years of watersports manufacturing experience responsible for making the first compression molded wakeboard/

wakeskate/wakesurf board and the original wakeboard boot covering the globe. All together we make products in 27 unique factories in 10 countries. A more

expensive and timely way of doing business for sure, but when you lace into our new baseless boots riding Danny Harf’s new sintered base Directional R3

Technology One board and take a left handed double up at the end of the lake we think you will know why.

THINKGLOBALLY

RIDELOCALLY

vivala

ron

ix.com

·

21

CHAD SHARPE IS THE VIVA COLLECTION

THE VIVA HAS A FREERIDE FEEL, SETTING

AN EDGE WITH MORE SPEED OUT OF A TURN.

A BOARD YOU GAIN CONFIDENCE WITH AS

YOU GET ON THE GAS WITH THE INCREASED

GLIDE OF A UNIQUE VARIABLE RAIL. CHAD’S

QUICK HYBRID ROCKER COMBINES THE SPEED

NEEDED TO MAKE ANY WAKE TRANSFER

SEEM EFFORTLESS, WITH MORE VERTICAL KICK

THAN A TRADITIONAL CONTINUOUS ROCKER.

VIVA BOARD Chad Sharpe’s faster rocker line designs have earned him the title of the largest recorded double up, with 56 frames of film captured from wake to landing. In the past couple of seasons, Chad has added even more kick to his board with a slightly more explosive hybrid rocker line. The Viva carries as much speed up the wake as his previous continuous rocker shapes – but with more of a vertical 3-stage snap leaving the wake. This high-end charger sets a slightly mellower initial edge, but once on edge carries rider’s tricks further out into the flats. Effortless high speed carves and a more forgiving rail design.

× Center variable edge – a semi full rail and a subtle bevel create a controlled accelerated edge transfer with a forgiving bottom design × Tip/Tail variable edge – a sharper rail and bevel have more of a locked down feel once on edge × Thin profile reduces swing weight × Molded in outer fins - a quicker release off the wake × Directional R3 Technology – ride the board the way it was intended to be ridden with the carbon maintaining the original rocker line × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × Sintered Base – the most durable non stick compound we have ever tested on rails without loosing any glide speed on the water × Artwork – screened UV clear top/2 – Gold emblems /pearl metallic ink × 4 fiberglass 1.0” fins and 4 fiberglass .8” slider fins (slider fins come with sintered base option only) × Chad Sharpe creation

OPTIONAL

23

vivala

ron

ix.com

·

CELL BOOT Chad Sharpe’s lightweight gnarly boots are the stiffest boots in our line, featuring more overall foot and lower leg support. This rigid back design creates the most responsive and direct control over your board. Comfort that you can dictate with our heat molded footwear.

× Ronix’s patent pending baseless system makes this boot roughly 1/3 lighter and lower in height for increased board control × Intuition Liner - preformed heat moldable - the ultimate customizable liners × A stiff density liner for the best in responsive board control × Made from wakeboard specific lasts – not a guess × Double lasted with the most low profile and compact lasts eliminates excess material and delivers optimal energytransfer between boot and board × Removable J-bars customize your heel pocket × Feetbelt – secures your ankle and maximizes heel hold × R.A.D. foam- radder dampening than ever × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Ridden by Chad Sharpe

FLEX 9

hello my name i

25

is collection

an aquatic fabrication by bill & frank

ridden by adam errington

billsstupendousflavorsaver.com ·

BILL BOARD Leave it to Bill to design his second series with us that has a different skate like feel on the water for water jockey sledders that can only be described as – a versatile ride behind the boat, or at a cable park. A new board for the movement of longer rope lengths, bigger wakes and faster boat speeds comes equipped with our new sintered snowboard base material. Bill set out to create a shape for the modern day wakeboarder with an improved drag coefficient that has a super mellow continuous rocker with a higher degree angle in the tip/tail. Bill has all sorts of big words like drag coefficient. He’s a smart guy and knows what the next generation of riders are looking for in a really fast board refined from last years Bill series.

× Center variable edge – a 10” semi full rail and a subtle bevel create a controlled accelerated edge transfer with a forgiving bottom design × Tip/Tail variable edge – a sharper rail and bevel have more of a locked down feel once on edge × Thinner profile reduces swing weight along with a unique 45° angled tip/tail profile × Simple bottom shape with a slight convex belly designed to land with more forward momentum × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive new blend of carbon and atoms × Sintered Base – the most durable non stick compound we have ever tested on rails without loosing any glide speed on the water × Artwork - screened UV clear top/neon color inks/metal Ronix emblem/chalkboard ink tail area/chalk included × Sintered snowboard base – grind away × 4 fiberglass 1.0” fins & 4 fiberglass .8” slider fins × Bill approved and endorsed by the 2009 WWA National Champion Adam Errington

billsstupendousflavorsaver.com ·

27

FRANK BOOT Thank Frank for our most affordable heat formed Intuition custom orthotic boot. Our friend riding in the shadows of the rest of our team created a boot softer than the Cell and the One, and stiffer than the Relik boot. If you can read Braille – you will dig some of the hidden messages on this boot.

× Ronix’s patent pending baseless system makes this boot roughly 1/3 lighter and lower in height for increased board control × Intuition Liner - preformed heat moldable - the ultimate customizable liners × A medium density liner blending mobility and precision board control × Made from wakeboard specific lasts – not a guess × Double lasted with the most low profile and compact lasts eliminates excess material and delivers optimal energy transfer between boot and board × Built in J-bars improve heel hold × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Designed by Frank and ridden by Adam Errington

FLEX 7

Dean Smith’s new amped up Mana board makes every wake feel like a triple up, whether you are loaded up or running

flat into the wake. The most overall aggressive board in our line has a flattened rocker under your feet and a super late

kick in the tip/tail. A board that lives up to the Polynesian name Kaimana – power of the water.

29

acou

sticsw

ithou

ttheb

ase

.com

·

MANA BOARD An award winning boot off the liquid kicker from our new Mana series. For a rider looking for the ultimate straight up in the air snap. Australia’s Dean Smith has been working with our engineers the past couple of seasons on a new ride that has a super flat rocker under your feet and a really late/abrupt kick that doesn’t punch through the wake. The Mana was designed to be ridden on edge with a sharper rail throughout the board, but doesn’t need much angle into the wake to get a solid pop. Our most responsive, explosive new series.

× Sharp rail from tip to tail for more effective edge in the water × Softer bevel in the center of the board prevents catching an edge × Total of 8 molded in fins .7” outer, and .4” inner provide just enough grip to ride finless, but still has an easy release for spins × Slight “V” bottom means a faster edge to edge transition and softer landings × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × Artwork – screened UV clear top/metal flake/wood inlay/2 copper foils/maori bone inspired carving × 2 fiberglass 1.0” fins × Kaimana – power of the water with a good luck Maori bone over the waters travels × Dean Smith design

acou

sticsw

ithou

ttheb

ase

.com

·

31

KAI BOOT Created for any riding style looking for comfort, ease of entry, and Onyx2 liner support. An affordable value with the same refined styling as our other high-end custom orthotic boots, available in both a closed and open toe model. The stiffest open toe performer in our line up. Inspired by our friends on the island, and the shell of this boot was made from recycled PET - plastic water bottle material.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Single lasted with the most low profile and compact last × Double laces - a more customized fit × 3D-Molded Quad Density tongue blends comfort and performance × Lightweight comfort fit Onyx 2 liner × Articulating cuff - the boot flexes with the rider without any pressure points × Built in J-bars improve heel hold × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents and using recycled shell materials × Ridden and designed with the help of Dean Smith

FLEX 8FLEX 7

DISTRICT BOARD Not sure of your riding style, and just want an all around high-end board? The District is a very predictable ride setting an edge or leaving the kicker. A low maintenance all around fun new ride – for riders that want a skate like feel on the water. A universal arc creates speed from an idle continuous rocker in the middle length of the board, combined with a kink in the tip/tail area. This hybrid curve means that riders with a tail-heavy body position notice additional speed off the wake from the smooth transition. Riders with their weight more centered rely on the additional bend in the tip/tail of the board with the added straight up snap off the wake. A lively, responsive all-around series.

× Sharp bevel from tip to tail for the quickest in edge response × Fuller center rail rides higher in the water with a sharper rail in the tail area for extra grip up the wake × Thinner profile reduces swing weight × 4 molded-in outer fins offer a quicker release off the wake × Simple bottom shape designed to land with more forward momentum × Artwork – screened deep red flake/gold foil stamp × 2 fiberglass 1.3” fins × Endorsed by the everyday rider

The alternative to riding style

stereotypes with the everyday rider

in mind. A shape that you can’t help but ride

better on, whether you have a progressive cut, or come

into the wake flat. Always in control, even when you’re not.

Designed for any style of wakeboarding.

ron

ixwak

e.c

om

·

33

DISTRICT BOOT A new open toe creation combining the molded tongue support and comfort of the Kai boot, but made from a softer high-grade liner. Proving that not all of our high-end boots have to keep your toes warm. The revolutionary Ronix fit ata more affordable value.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × A new soft density 3D-Molded tongue × A combination of Onyx 2 and Onyx foam balances performance and comfort × Articulating cuff - the boot flexes with the rider without any pressure points × Built in J-bars improve heel hold × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Designed with the everyday rider in mind

FLEX 6

VAULT BOARD Redefining the versatility of board shapes for toe/heelside demands. When you are riding heelside, your body is facing the boat with natural balance. While riding toeside your shoulders are facing the boat and your hips are crossed up. Toeside is an unnatural position without as much effective edge in the water. Every aspect of the rocker line, sidecut and variable rails of the Vault is designed for maximum edge hold on your toeside, while still giving you freedom to break free on your heelside.

× Toeside rail is thinned out to sit deeper in the water along with a wider profile with less sidecut riding higher up the wake with a bigger sweet spot × Heelside rail has a more vertical sidewall with less resistance on the water, and more sidecut for a quicker release × Artwork – sublimated top/flock chrome sticker × 4 molded fins × 2 fiberglass 1.7” fins × Designed by Mike Ferraro and our development team

A series of boards that understand

your body is working against the boat on a

toeside edge - with additional grip for added stability. A floatier

ride and a quicker release on your heelside.

metaphoricalw

aterwonderland.com

·

35

DIVIDE BOOT A boot we would put up against other “pro model” boots out there. Our most inexpensive line of footwear uses a a high end memory foam with an articulating shell to reduce pressure points – allowing freedom of movement without any “hot spots” found in most one piece constructed boots. Save your energy for after you have jumped off the swim deck with the latest in ease of entry and open toe adjustability. Just try it on, that’s all we ask.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Universal tongue – our most adjustable boot fitting multiple sizes × Built in J-bars improve heel hold × Onyx comfort fit foam × Articulating cuff – the boot flexes with the rider × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Designed with the everyday rider in mind

FLEX 5

A MOMENT OF CLARITY BROUGHT CREATIVITY TO A DESTINED FATE

COUNTING WAKEBOARD BEANS NO LONGER BECAME A NATURE OF TRAIT

KITES WE TELL YOU KITES, BIG OXYGEN INTAKING FLYING DEVICES

MIXED WITH A FESTIVE LINE OF INNER TUBES WOULD TAKE THEM FROM THIS ECONOMIC CRISIS. . .

ron

then

inth

.com

·

37

THANK YOU FOR MAKING US THE FASTEST

GROWING PRO SHOP DRIVEN

WAKEBOARD BRAND

NOTHING MORE NOTHING LESS

- RONIX

ZARIEL WAKESKATEFrom the creators of the original compression molded wakeskate - the heavy weight guardian of the water is coming in at over 14 lbs. Reed Hansen needed a stockier skate for the board control he was looking for on the water and leaving it. Ronix spent two seasons designing a compression molded bi-level wood skate with the buoyancy of your favorite wood deck, and the durability of that wakeboard you have had in the garage since 97’. This bi-level shape creates a consistent, quicker swing weight than a traditional single level skate yet still has the stability for somebody just taking the drop. × Concave - starts in the center of the board and then tapers out the ends for a more controllable flip × Hybrid Rocker – isn’t too explosive, or inconsistent off the wake, instead more glide speed from this arc × Compression molding – the most durable wood skate out there × 2 Zariel .8” wakeskate specific fins × Reed Hansen designed and endorsed

belo

wth

esta

nd

ard

.com

·

39

OBESE TECHNOLOGY

14 + lbs. – more board control with a heavier skate.

KOAL SURFBOARD

thingsarewhatw

ewantthem

tobe.com ·

A high end line of fast gliding surf constructed decks for us freshies, from the creators of the original compression molded wake surfboard. The past 8 years of designing wake surfboards has resulted in our most high end line of carvers inspired by of our favorite fish profiled board. This speedy shape rides higher on the water with a fuller profile and a more buoyant core. A swallow tail shape with three fins designed with one function – to go fast. The Koal’s shape and construction is a perfect ride for inlanders looking for the best in wake slashing performance available in 3 sizes covering the spectrum of surfers and wake sizes. × Machined EVA top deck with built in wedge and arch × The quickest surf rocker line, construction, profile and rail design we have ever made × 3 surf specific fins × The soul of surfing

41

CORTEZ SURFBOARD

ron

ixwak

e.c

om

·

A new swallow tail designed with toes on the nose stability, frontside airs off the lip performance, and big cutbacks on the wake. Wakeboard durability, with surf constructed buoyancy from the originators of the first compression molded wake surfboard. The 4’8” is perfect for riders looking at a performance deck on mid-to-large size freshwater barrels. The fish shape delivers on the rail maneuverability with a speedy rocker line to keep a surfer tight in the line of the wake. The bigger 5’4” is for riders looking for a freshwater surf experience - even with smaller boat wakes. × EVA top deck with built in wedge and arch × Variable rail design – sharper bevel/rail in the tail for a quicker edge transfer and a mellower more stable bevel/rail blending to the front of the board for a floatier, more forgiving feel × Krypto Cable- makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × 3 surf specific designed fins 43

FRANK IMPACT JACKETBill decided to jump into the fashion water parka world with his own signature no zip pull over design. Made from a thicker 3mm material with greater padding on those untimely bails. The Coast Guard might not have approved it, but our friend Bill from the great white North gave his stamp of approval.

× 4 way stretch material

× Bill designed

× Ridden by Adam Errington

× Sizes: Small – XL

COSA NOSTRA IMPACT JACKET

Chad Sharpe has his second signature impact jacket with Ronix - the Cosa

Nostra. A lightweight, non Coast Guard approved jacket has a socially

responsible conscience of reducing the impact on those unforeseen eye

peelers. Featuring a semi side zip pullover with a magnetic flap covering the

zipper. You can’t put a price tag on that kind of sex appeal.

× 2 way stretch material

× Zippers and magnets baby

× Chad Sharpe designed and ridden

× Sizes: Small – XXL

RIB HUGGERS

KAIMANA LIFE VESTKaimana – the power of the water. Ronix’s first Coast Guard approved jacket - with built in flex segments and oversized armholes for extra mobility and water resistant neo skin panels. This vest fits snug to a rider’s chest with an anatomical cut, 2 buckles and one zipper closure.

× Coast Guard approval – safety doesn’t take a vacation × Inspired by our friends on the island × Sizes: Small - XXL

COORDINATE & TYPE VORN IMPACT JACKETThis contact resistant, lightweight comfy little hot rod might not have the householdbrand name tagged to it – or some water resistant built in boom box. Leaving us withoutthe history tag, or the hi-fi sales pitch – instead we will dig a little deeper into the innermakings. It’s a fashionable solution to the daily wakeboard requirement. ParksBonifay’s front and rear zip elastic spinning assault garment of choice. The Coordinate vest has the whereabouts of Radar Lake on it, for improved voyeurism,

× 4 way stretch material × Front zip available on Type Vorn × Rear zip pullover available on Coordinate × Parks Bonifay designed and ridden × Sizes: Small - XXL

CHEST SIZINGSIZE MEASUREMENT

Small 33”-36” / 84-92cmMedium 37”-40” / 93-103cmLarge 41”-44” / 104-112cmX-Large 45”-48” / 113-122cmXX-Large 49” / 123cm +

45

billsstupendousflavorsaver.com ·

T7T7 Lightweight aircraft aluminum dowel. Less than half the weight of any of our other handles. The true spinning assault weapon of war.

ONE DETACHABLE × Nylon Detachable Anti Roll system × Comes with allen wrench tool to remove and connect optional grips × New Fused Suction cup grip × 4mm thick molded handle grip × Strung with a stronger and smaller diameter 12-strand Dyneema rope × Three layers: 6mm EVA / 1 sheet Lycra / 1 sheet mesh × T6 lightweight aircraft aluminum dowel × Inside filled with EVA for floatation × Available in Straight or T-wrap × Ridden by Danny Harf

RECALL FOAM Underneath some of our grips is a new memory material that will actually form to your fingers when you snatch it

HANDLES GRIPS MAINLINES

THE CHEFS EVA The more affordable value of foam. Made out of a similar compound as the Szeto – just cooked instead of machined, to mold the form of a grip. Doesn’t quite have the clamp of the Szeto - but a similar soft finish.

TPRThe EVA alternative is our most affordable hold with a soft,durable rubber compound.

HYDRA The Hydra grip has suction cups attached to a mesh weave, so there is no need for water mittens. Hercules got Hydra with a cheap shot back in the day, but we think our version would have taken him out for sure. If you are out there we want a rematch.

SZETO BLEND A machined blend of primo EVA. This batch has a slightly rougher texture of our soft forming high memory foam.

HIDEThis outer material has a softer feel, when wet it’s as tacky as this next sentence. Don’t worry vegans it isn’t really made out of our friends down at the farm.

T

A

C

K

I

N

E

S

S

L

E

S

S

M

O

R

E

CORESuper stiff, 24 strand dyneema weave with an inner neoprene core.

SOLINSimilar tensile strength to the core series - just doesn’t have the swimming skills without the neoprene inside.

PE A forgiving alternative for recreational riders.

RX-80 A glow in the dark rigid mainline with a urethane coating, and a Dyneema weave. Means more time for hitting transfers instead of undoing knots.

R8 A roomy tangle free 80 footer and a similar construction to the RX – just not as nocturnal.

S

T

I

F

F

N

E

S

S

L

E

S

S

M

O

R

E

THE LOOP Our original lightweight anti roll design. A traditional aluminum bar handle with built in side loops preventing a handle from collapsing doing a good ol’ handle rotation. The 812 crew asked for it - we built it.

PREQUELTesting in our lab at a breaking point of 1700 pounds – the framework of this aluminum bar handle has all of the strength of the others. Designed for riders that don’t need the performance advantages of an anti roll system on handle passes.

A

N

T

I

-

R

O

L

L

L

E

S

S

M

O

R

E

SYNTHETICWe could sit and tell you all of the performance advantages of our latest high-end mainline but just hit pause on your background music and just marinate on this image for a second – it’s neon pink leather.

FUSED SUCTIONNew for this year, we created a grip using some of our favorite textures and bonded them together into one. Using our moldable recall foam, EVA, lycra, and mesh we have another reason why you won’t pop the handle on that trick you have been working on with our tackiest material.

SYNTHETIC WRAP Over extend your passing hand? No worries Bill’s new creation will make sure you won’t smack yourself. A softer anti roll alternative to the conventional carbon design – with a fully wrapped PU constructed handle.

DETACHABLE Danny Harf’s new anti roll creation allows riders to interchange different diameter and shaped grips while using just one handle. By loosening both ends, the grip can easily detach to switch out to one of our other 4 after market grips.

MORE OR LESS: A CHEAT SHEET TO DETERMINE THE HANDLE, GRIP AND MAINLINE THAT’S RIGHT FOR YOU.

Here are 4 aftermarket grips that will attach to our new system....

Narrow CircleHexagonal AsymmetricOval

Double Oval

85fe

et.c

om

·

MIDAS

× Loop handle end caps × Anti roll × Hydra grip × 4mm memory foam × Suede w/screened silicon Ronix icons × T6 aluminum aircraft dowel × Inside filled with EVA for floatation × Strung with a stronger and smaller diameter 12-strand

Dyneema rope × Available in Straight only × Ridden by Chad Sharpe

VOLT × Over 50% lighter than any other Ronix handle - just 8 ounces… × NEW Fused Suction cup grip × 4mm thick molded handle grip × Three layers: 6mm EVA / 1 sheet Lycra / 1 sheet mesh × T7 lightweight aircraft aluminum dowel × Inside filled with EVA for floatation × Strung with a stronger and smaller diameter 12-strand

Dyneema rope × Available in Straight Only × Ridden by Parks Bonifay

FRANK SYNTHETIC × Fully wrapped PU leather × Semi anti roll × Hydra grip × 4mm memory foam × Suede w/ screened silicon RONIX icons × T6 lightweight aircraft aluminum dowel × Inside filled with EVA for floatation × Strung with a stronger and smaller diameter 12-strand

Dyneema rope × Available in Straight only × Ridden by Adam Errington

NORTH

× Prequel frame × Hide grip sewn to 5mm thick recall foam × 6” finger protector end caps × Handle is strung with 100% Dyneema fiber 16-strand rope × Available in Straight or T-wrap

ENVOY × Prequel frame × 3mm diameter Szeto grip w/ 1mm thick die cut surface grip × 7” low profile foam floats × Handle is strung with 100% Dyneema fiber16-strand rope × Available in Straight only

See women’s page 13 for additional colors

47

70FT SOLIN × 24-Strand Tensilon Cover × 100% dyneema core × 75ft total length including handle × 3 - 5ft take off sections × Color Options: red/silver, black/silver

FRANK SYNTHETIC 80FT 6-SECTION MAINLINE × PU synthetic wrap cover – pink and black × Strung with a stronger and smaller

diameter 12-strand Dyneema rope × Coils easily × 85ft total length including handle × One 60ft mainline × Three 5ft sections × Two 2 1/2ft sections × Pink/Black colorway

RX 80FT

× Urethane coated “glow in the dark” cover × 100% dyneema 12-strand braided core × Abrasion free, snag resistant cover × 85ft total length including handle × 5 - 5ft take off sections × One 60ft mainline × Three 5ft sections × Two 2 1/2ft sections

70FT CORE × 24-Strand Tensilon cover × Outer core constructed of 100% Dyneema fibers × Neoprene inner core for flotation × UV resistance × 75ft total length including handle × 3 - 5ft take off sections × Color Options: black/gold, white/silver

See women’s page 13 for additional colors

R8 80FT

× Urethane coated cover × 100% dyneema 12-strand braided core × Abrasion free, snag resistant cover × 85ft total length including handle × 5 - 5ft take off sections × One 60ft mainline × Three 5ft sections × Two 2 1/2ft sections × Color Options: black, metal flake silver, metal flake gold, white

See women’s page 13 for additional colors

WEBBING BOATDOCK TIES × Adjustable in length from 3ft to 6ft

SURFROPEHANDLETo chase the endless wave you onlyneed 20 feet. (Assorted colors)

BACHELORS × Prequel handle × Chefs EVA grip × 65ft PE mainline

(Assorted colors)

ASSOCIATES × Prequel handle × TPR grip × 65 ft PE mainline

(Assorted colors)

KIDS × Shorter 14” length Prequel handle × Narrow diameter Hide grip × PE mainline

(Assorted colors)

49

HAPPY HOURBOAT BUMPERBring on the flotilla - that’s what we call a big boat tie up. × 8” diameter X 18” long × Comes with two valves × 4ft mooring line × Easy for storage when deflated

DOCTORATE × Prequel handle × Hide grip × R8 mainline

(Assorted colors)

MASTERS × Prequel handle × Hide grip × Solin mainline

(Assorted colors)

85fe

et.c

om

·

LINKS EDITION WHEELIE BAG What happens if there was a board bag that magically wasn’t categorized as a

board bag at the airport because it looked like a golf bag? What happens if that

same bag wasn’t considered oversized when you checked it in on the plane and

saved the oversized bucks? They don’t believe you that it’s a golf bag – you open

it up and we even threw in a portable driving range.

Featuring 3 really important “A chance to’s”;

× A chance to work on your follow thru with that new

golf driver you just bought

× A chance to work on your feeble grind at the local

skate park with this new wheelie delight

× A chance to make small talk with Emily when

you bump into her at a pro tour and tell her you

rock the same bag that she does

LINKS EDITION BACKPACK STRAPSAll the same features as the other Links – just the wheels have been

substituted for golf inspired shoulder straps.

BATTALION PADDED BAG

A padded traveling den - roomy enough to fit all of your stash.

× Durable padded shell

× Shoulder strap

× Internal and 2 External pockets

× Available in black (A) and green (B)

(A)

ron

ixwak

e.c

om

·

51

COLLATERAL BAG Other companies may claim their products are tighter

– but ask your self are their boots

1/3 lighter. We also have a really

nice unpadded board bag at an

affordable value.

× Internal pocket

DEMPSEY SURF BAGTwice as much padding as any of our board bags. We want to

make sure your surf constructed Koal can get there safely.

× Super durable padded shell

× Shoulder strap

× Fin Protector

× External pocket

(B)

SHORT SLEEVEBELLY BUTTON PROTECTORSNeon Light – BlackMegacorp – Black One – WhiteMadison Dot – Black

Available Sizes:Small – XXL

ron

ixstore

.com

·

53

JACKETS/HOODIESAREOLA PROTECTORSPatchwork Zip Up Jacket – BlackHuzinator Pull Over Hoody – BlueTron Zip Up Hoody – Black

Available Sizes:Small – XXL

DOME DEVICESAll of our lids are fabricated by the fine folksof New Era Signature

Presidente – White Forester – Ash FlannelUndertow – Black/White*Shadow – Black Leather *comes in custom New Era box

Available Sizes:7 1/8”, 7 1/4”, 7 3/8”, 7 1/2”, 7 5/8”(Forester not available in 7 1/8”)

VISION & AUGUST KIDS BOARD For the last 4 years at Ronix, we have been making a full range of men’s and women’s boards. All the while our engineers have been working with the next generation of riders on a

shape for them. It is easy to take a wakeboard and scale it down to size and say it is a “kids board”, but that is not what our shredders were looking for. The Vision and August 120 are not based off any of our other boards, instead just features

that make sense for them. A board that has softer outside molded in fins for easier surface turns, but still has a sharp top and inside shape for extra grip when needed. Longer fins on the toeside allow a rider to stand in a more comfortable

position. A 4 degree bevel means cleaner transitions and less edge catches, while a mellow, consistent 2.4” easy landing continuous rocker sets the pace of this new ultimate kids shape.

× Wide tip/tail - easy starts, rides higher at slow speeds, gives riders larger sweet spot for take offs and landings

× Mellow round radius fading bevel - sets a predictable smooth transitioned edge with little effort, doesn’t require a steep edge angle to get speed

× Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board

× Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms

× 4 Asymmetric molded outer fins – needed additional grip on your toeside as a riders body is crossed up from the boat

× 2 detachable fiberglass 1.75” hook fins provide all the grip and stability needed in choppier water conditions

× More total surface area in a kids specific design with a bigger sweet spot

× Designed by Mike Ferraro and our junior development team

READ ABOUT THE VISION & AUGUST BOOTS

ON THE NEXT PAGE

03

metaphoricalw

aterwonderland.com

·

When I made the switch to Ronix wakeboards and became an owner, I had a vision of creating a line of product that would meet every woman’s

riding ability, style, and comfort. Finally, that vision came true and we are making products designed by a woman for a woman. Boards that

improve our riding, boots that fit specifically to our feet, along with our ropes, handles and life vests all made with a woman in mind. This year I

have created a new collection of products that are a part of my Faith Hope Love collection, we added a really explosive new Dahlia board to the

line, women’s surfers, girls boards/boots, and more...

It makes me so excited to see girls on the water and to see how far women’s riding has come. My desire is that every girl out there has the best

possible chance to learn and have fun, so why not make it easier by getting equipment that will only help? I promise that Ronix and I will continue

to grow the sport of women’s wakeboarding with the products that we make. That the boards will not only look amazing, but ride with the fluidity

and grace that we want, as well as with the intensity and power suitable for any rider. My goal is to see you riding to your full potential and loving

the board setup that you are on. So as we continue on this journey of innovation, what better way to do this than by making you, a woman, our

inspiration.

-Emily Copeland Durham

AUGUST 12TH / WAKEBOARDING DAY Rise and shine chicks and bros. All right so hopefully you know a little bit about us, we have a ricockulous (that is a good thing) team, baseless heat formed boots, and some lightweight snappy boards. Not important right now,

we are getting off track with why we reserved this soulful piece of propaganda. In today’s age it seems the day is getting a little shorter – campfire stories of the perfect session can too easily be replaced by updating my tweet

book account. Not the case on August 12th - it shouldn’t be on most days, but trust us on 8/12 you need to be sideways. A day to get back to the purity of why we all jumped off the swim deck for the first time, or the adrenaline

rush of trying to do the infamous trick that rattled your dome last season.

So here is what you gotta do, and you might not like it when the alarm is cranking at quarter to 5, but you need to get up at the crack of dawn and carve some fresh tracks. Make sure your cell phone is no where in sight, laptop,

video games and most other “modern conveniences” that you can think of are sidelined for what should be front and center - a couple of 5 gallon buckets, boat keys, the perfect setup. Grab a couple of your favorite chums and

make a day out of it. Hit that perfect left hander at the end of the lake, finish tapping screws on that 13 degree pitched A-Frame. Remember no cell phones – text messaging can be evil, instead spend that time coming up with

a nickname for your buddy that bailed out last minute.

Send us your most legendary moment. Snap a pic, or a video clip, and email us at ryan@squareoneco.com. Write a story about what you did that day that you have never done in wakeboarding. 3 of the most, absurd, funny,

maybe even heart warming stories (you never know, you might find your soul mate out on the currents on our self proclaimed official wakeboard day) will be published court side on our website along with receiving a free set

up signed by Emily, Parks, Chad, or Mr. D. Harf.

FAITH HOPE LOVE BOARD For 2010, Emily overhauled her collection with her second female specific signature deck. The Faith Hope Love has a slightly lowered hybrid rocker line blending speed, and a consistent smooth pop off the liquid transition, with a bigger sweet spot A new wider/mellower profile with more effective edge in the water means that instead of the angle generating the speed into the wake, the speed and lift comes from increased glide on the water and overall stability. Riding higher on the water means less work edging into a trick and more forward momentum on landings. The latest creation from thefirst lady of Ronix.

× Fuller rail in the center of the board makes the board more forgiving × Then blending to a harder rail design towards the tip/tail for increased glide speed and more stability while setting an edge × Thinnest profiled board in our line reduces swing weight and makes landings feel softer softer × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × 4 .6” deep molded in outer fins for those looking for a looser/faster feel × Artwork - UV clear top/rose & gold pearl ink/gold stingray embossed emblem/gold foil/flock emblem × 2 fiberglass 1.0” fins × Emily Copeland Durham endorsed

A new collection of high-end women’s products designed for the

way women ride.

Not even Emily rides the way guys do – Emily’s new collection

is created for every aspect of the true rulers of the

waterway. The flex, sidecut, rocker and rail were

shaped for the characteristics of a women’s

specific design. Riding with less

resistance – plan to carve and

get booted off the wake

with less work.

05

acou

sticsw

ithou

ttheb

ase

.com

·

FAITH HOPE LOVE BOOT Emily’s fashion forward footwear was designed from the sole up on the foundation of a women’s foot. High-end footwear shouldn’t be a scaled down version of the other guy’s. The Faith Hope Love was made with Emily’s cut, flex, lean, and look in a closed toe special. A look that is ready to grace the red carpet, and performance for a right hand double up at the end of the lake.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Our softest density closed toe model × Made from a women’s wakeboard specific last – not a guess × Lasted with the most low profile and compact lasts eliminates excess material and delivers optimal energytransfer between boot and board × Double laces - a more customized fit × Removable J-bars customize your heel pocket × Feetbelt – secures your ankle and maximizes heel hold × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Ridden By Emily Copeland Durham

FLEX 6

A more aggressive on the water, and explosive off the water alternative to

Emily’s Faith Hope Love board. The supercharged new Dahlia shape

has a kick with no boundaries with the most agro

rocker in our line. Ladies buckle up.

DAHLIA BOARD For the female shredder looking for the ultimate straight up in the air snap off the liquid kicker. The Dahlia features a super flat rocker under your feet, with a really late/abrupt kick that doesn’t punch through the wake. A board you can’t help but find the additional hangtime to make that elusive trick come easier. This series was designed to be ridden on edge with a sharper rail throughout the board, but doesn’t need much angle into the wake get a solid pop off the wake. Our most responsive, explosive new series still has a soft bevel in the center of the board for a controlled/responsive edge transfer, and an overall more forgiving feel on the water.

× Sharp rail from tip to tail for more effective edge in the water × Softer bevel in the center of the board prevents catching an edge × Total of 8 molded in fins .7” outer, and .4” inner provide just enough grip but still has easy release for spins × Slight “V” bottom means a faster edge to edge transition and softer landings × Krypto Cable - makes the sidewalls the strongest part of the board – not the weakest, along with a torsionally stiffer board × Mod Pour - this demanding alternative core is new for this year made from our exclusive blend of carbon and atoms × Artwork – screened UV clear top/metal flake/transparent ink/Disco ball chrome emblem × 2 fiberglass 1.0” fins × Ridden by Hayley Smith

07

ron

ixfootw

ear.c

om

·

FLEX 7

HALO BOOT A woman’s cut, look, and flex that proves not all our high-end boots have to keep toes warm. The Halo is the stiffest women’s boot with our new reinforced Onyx 2 liner. Our premier open toe design – modeled from a female’s foot.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Double laces - a more customized fit × 3D-Molded Quad Density tongue blends comfort and performance × Lightweight comfort fit Onyx 2 liner × Articulating cuff - the boot flexes with the rider without any pressure points × Built in J-bars improve heel hold × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents × Endorsed by Hayley Smith

KRUSH BOARD Redefining the versatility of board shapes for toe/heelside demands. When you are riding heelside your body is facing the boat with natural balance. While riding toeside your shoulders are facing the boat and your hips are crossed up. Toeside is an unnatural position without as much effective edge in the water. Every aspect of the rocker line, sidecut and variable rails of the Krush is designed for maximum edge hold on your toeside, while still giving you freedom to break free on your heelside.

× Toeside rail is thinned out to sit deeper in the water along with a wider profile with less sidecut riding higher up the wake with a bigger sweet spot × Heelside rail has a more vertical sidewall with less resistance on the water, and more sidecut for a quicker release × Artwork – iridescent glitter sublimated top/flock chrome sticker × 4 molded fins × 2 fiberglass 1.3” fins × Designed with the every day rider in mind

A series of boards that understand your body is working against the boat on

a toeside edge. Designed with additional grip on your toeside, and a

floatier ride and a quicker release on your heelside.

ron

ixwak

e.c

om

·

09

LUXE BOOT A total redesign of our most inexpensive women’s specific adjustable performer. A new comfy, high-end memory foam, and an articulating shell transferring more energy to your ride without any “hot spots”. Designed with the every day rider in mind.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control × Universal tongue – our most adjustable boot fitting multiple sizes × Built in J-bars improve heel hold × Onyx comfort fit foam × Articulating cuff – the boot flexes with the rider × Throw your screwdriver away with our new tool less mounting system × Eco Innovation – no use of PVC solvents

FLEX 4

WOMEN’S KOAL 4’10”SURFBOARD

The 4’ 10” Koal is the premier high-end fast gliding surf constructed women’s edition for us freshies, from the creators of the original compression molded wake surfboard. The past 8 years of designing wake surfboards has resulted in our most progressive new deck inspired by our favorite fish profiled board. Riding higher on the water, with a fuller rail and a more buoyant core. A swallow tail shape with three fins designed with one function – to go fast. The Koal’s shape and construction is a perfect float for inlanders looking for the best in wake slashing performance. × Machined EVA top deck with built in wedge and arch × The quickest rocker line, construction, profile and rail design we have ever made × 3 surf specific fins × The soul of surfing 11

thingsarewhatw

ewantthem

tobe.com ·

CHEST SIZINGSIZE MEASUREMENTX-Small 27”-29”/69-74cmSmall 30”-33”/76-84cmMedium 34”-36”/85-92cmLarge 37”-39”/93-99cmX-Large 40”/100cm +

CORAL IMPACT JACKETThe Coral is a lightweight non Coast Guard approved impact jacket made with a super comfortable/elastic neoprene material. × 4 way stretch material × Rear zip pullover × Color: dusty rose × Sizes - XS – XL

MUSE LIFE VESTThis women’s specific Coast Guard approved vest fits snug to a rider’s chest with an anatomical cut, 2 buckles and one zipper closure. Built in flex seg-ments and oversized armholes for extra mobility and water resistant neo skin panels. For female shredders that want to ride as good as they look. × Coast Guard approval

– safety doesn’t take a vacation × Sizes: Small – XL

DAWN PADDED BAGSmaller dimensions - scaled to fit any board/boot setup in our women’s line.

× Durable padded shell × Shoulder strap × Internal and 2 external pockets

SPIRE PURPLE V-NECK × Available Sizes: Small-XL

R8 80FT

× Urethane coated cover × 100% Dyneema 12-strand braided core × Abrasion free, snag resistant cover × 85ft total length including handle × 5 - 5ft take off sections × One 60ft mainline × Three 5ft sections × Two 2 1/2ft sections × Color Options: white, pink

13

PRESTIGE HANDLE × Narrower diameter – true women’s grip × 3mm diameter Szeto grip w/1mm thick die cut surface grip × 7” low profile foam floats × Handle is strung with 100% dyneema fiber 16-strand rope × Available in Straight only

MIDNIGHT ASH HOODY × Thumb holes on sleeves

× Available Sizes: Small-XL

See men’s pages 46-49 for additional ropes and handles

See men’s pages 46-49 for additional ropes and handles

ron

ixstore

.com

·

70FT CORE × 24-Strand Tensilon cover × Outer core constructed of 100% Dyneema fibers × Neoprene inner core for flotation × UV resistance × 75ft total length including handle × 3 - 5ft take off sections × Color Options: white/silver, black/pink

See men’s pages 46-49 for additional ropes and handles

AUGUST & VISION KIDS BOOT There is no need for any rabble rabble – just go to your local pro shop and lace them up. If you don’t agree that they are worth ever

penny then this next sentence would be false. “A fully loaded kids specific, easy entry, durable design winning the price to fit award in the future of wakeboarding department”. Remember

we wouldn’t lie to you.

× Ronix’s patent pending baseless system compared to a conventional plate design is 1/3 lighter with reduced overall swing weight and 1/3 lower to the board for superior control

× Universal tongue – our most adjustable boot fitting multiple kids sizes

× Built in J-bars improve heel hold

× Onyx comfort fit foam

× Articulating cuff – the boot flexes with the rider

× Throw your screwdriver away with our new tool less mounting system

× Eco Innovation – no use of PVC solvents

× Designed from a kids foot not a scaled version of an adult foot

VISION FLEX 5 AUGUST FLEX 3

READ ABOUT THE VISION & AUGUST BOARDS

ON THE NEXT PAGE