Upload
trandang
View
225
Download
0
Embed Size (px)
Citation preview
RTJ GASKETS
ntas CPI-RM / G-ST
The RTJ gaskets are designed to work with a high temperature and pressure values. For
this reason, if the sealing has to be maximum is essential that the flange surface be as
maximum smooth as possible, without roughness and tools marks neither.
The RTJ is plastically deformed and seals the surface irregularities that contact, for this
reason the gasket material has to be always softer than flange material. This difference
has to be, at least 20 HB. In the case where the gasket materials of RTJ type and the
flange had a similar hardness, will be necessary do a thermal treatment to the RTJ
gasket to reduce the hardness.
The RTJ gaskets have a low recuperation. The sealing is produced for the charge action
over the gasket.
Our RTJ gaskets production is based on the regulation ASME B16.20, generally in
octagonal profile or oval, and with a different kind of materials as AISI 304, 316L, 321,
347, INCOLOY 800, INCONEL 600, MONEL400,etc.
RTJ GASKETS
RTJ GASKETS
RTJ GASKETS
RTJ GASKETS