8/17/2019 s40x62x10

http://slidepdf.com/reader/full/s40x62x10 1/1

 

Data SheetNon-Contact Seals 

GMN Bearing USA12633 Shiloh Church RdHouston, TX 77066

www.gmnbt.com  Phone: (800) 323-5725Local: (281) 858-7000

Fax: (281) 858-7277

Notes:

1.  Axial Clearance (Sax) = The total axial movement of the seal’s inner ring in relation to the outer ring in the axial direction.

2. The stated speed value is contingent on utilizing specified tolerances, correct installation techniques, and an operating temperature be low the specifiedmaximum. 

Part Number S40X62X10

Series S Dimensions 

Drain Grooves No Bore Diameter d [mm] 40

Outer Diameter D [mm] 62

Material  Width B [mm] 10

Inner Ring Polyoxymethylene (POM) Minor Gap Diameter   e1 [mm] 46

Outer Ring Polyoxymethylene (POM) Major Gap Diameter e2 [mm] 56

 Axial Clearance1 Sax [mm] 1

Shaft & Housing Tolerances 

Shaft Tolerance h7 Misc. Data 

Housing Tolerance H7 Weight [kg] 0.020

Shaft & Housing Surface  Rz ≤ 16µm ; Ra ≤ 3.2µm Max Speed2 [rpm] 22,000

Shaft & Housing Chamfer 1.0 mm x 15° Temperature Range [°C] -40 – 60