SCIA Engineer CADS RC Designers Link Enu

8/13/2019 SCIA Engineer CADS RC Designers Link Enu

1/16

SCIA Engineer

CADS RC Design

Modules LinkHow to do batch processing


2/16

SCIA Engineer CADS RC Design modules link: How to do batch processing

All information in this document is subject to modification without prior notice. No part or this manualmay be reproduced, stored in a database or retrieval system or published, in any form or in any way,electronically, mechanically, by print, photo print, microfilm or any other means without prior writtenpermission from the publisher. Scia is not responsible for any direct or indirect damage because ofimperfections in the documentation and/or the software.

Copyright 2008 Scia Group nv. All rights reserved.


3/16

3

Table of contents

Batch design wi th CADS design modules .................................................................................................... 1Introduction ...................................................................................................................................................... 1Init ial requirements for batch process ing ..................................................................................................... 1RC Beam Designer (RCBD) batch processing ............................................................................................. 1RC Column Designer (RCCD) batch processing .......................................................................................... 4RC Pad base Designer (RCPBD) batch processing ..................................................................................... 7RC Pilecap Designer (RCPCD) batch processing ...................................................................................... 10


4/16


5/16

Batch design with CADS design modules

1


Introduction

This document describes the procedure to export and design reinforced concrete elements like beams,columns, padbases and pilecaps in batches from SCIA Engineer to CADS RC Design Modules.

Initial requirements for batch processing

1. Create a structural model in SCIA Engineer with Concrete as material and BS or India as Nationalcode.

2. Define Ultimate and Serviceability load combinations. All the RC designers require ULS loadcombinations and RCPBD additionally requires SLS load combinations for design.

3. Define Result classes with both ULS and SLS selected (required only for designing RC Padbase)

4. Run the analysis.

5. Now you are ready to export the various RC components to the corresponding CADS RC Designapplications using batch processing.

RC Beam Designer (RCBD) batch processing

Double click Concrete available in the Main tree.

Select Beam designer under CADS BS design module.

From the model select all or specific beams that need to be designed / exported.

In the Properties palette set the selection to Current, set the type of loads to Combinations andselect the required ULS combination.

Click the >>> Export button available under Actions.


6/16


The following dialog will appear:-

Select template or create new: A default template file will be displayed. By clicking the button(browse button) an existing template can be selected or using the New button a new template can

be created. If the selected template is not found in the specified path (which might got deleted ormoved to a different path), a warning message will be displayed and the default template will beused. Note that when there is a conflict between the template data and SCIA engineer data (egconcrete grade), the SCIA engineer data will be used.

When the New button is clicked an instance of RCBD will open. After making necessary changes inthe design parameters, save the blank job using the `save or `save as command to the desiredpath.

Enter file name for saving the status report: A random unique file name will be given by theapplication to save the status report in RTF file format. Define a new file name if required. This filewill be saved in the selected path for saving the batch jobs.

Select path for saving RCBD batch jobs: A default path will be given by the application to storethe batch jobs. Select an alternative path if required using the browse button available.

Press OK to continue the batch process.

The batch process will run in the background and the following dialog will be displayed aftercompleting the batch process.


7/16


3

Clicking View status report button will open the design summary report in RTF format in MS Word.The design summary report will have details like beam reference, span, size, concrete grade, bardetails, status, warnings and error messages for each selected beam.

Clicking Browse jobs will open the folder already specified in the initial batch process dialog wherethe RCBD batch jobs are stored.

Clicking Browse jobs will also close the above dialog automatically. Note that unless the BatchProcess dialog is closed the saved jobs cant be opened in CADS RC Beam Designer.

Close button will close the batch process and go back to SCIA Engineer. Note that unless the abovebatch process dialog is closed you cant go back to SCIA Engineer.

Note that the export is one way. No results will be displayed or used within SCIA Engineer.

When the same set of beams are redesigned using the batch process a message will be displayedto warn that the existing jobs will be overwritten with a new set of jobs. Clicking Yes will result inoverwriting the existing jobs. Clicking No will display the first batch process dialog to allow you tospecify a different path for saving the batch jobs. After changing the path and clicking OK the batchprocess will be completed and the status report and batch jobs will be saved in the newly specifiedpath.


8/16


RC Column Designer (RCCD) batch processing


Select Column designer under CADS BS design module.

From the model select all or specific columns that need to be designed / exported.




9/16


5


Select template or create new: A default template file will be displayed. By clicking the button(browse button) an existing template can be selected or using the New button a new template canbe created. If the selected template is not found in the specified path (which might got deleted ormoved to a different path), a warning message will be displayed and the default template will beused. Note that when there is a conflict between the template data and SCIA engineer data (egconcrete grade), the SCIA engineer data will be used.

When the New button is clicked an instance of RCCD will open. After making necessary changes inthe design parameters, save the blank job using the `save or `save as command to the desiredpath.

Enter file name for saving the status report: A random file name will be given by the application tosave the status report in RTF file format. Define a new file name if required. This file will be saved inthe selected folder for saving the batch jobs.

Select path for saving RCCD batch jobs:A default path will be given by the application to storethe batch jobs. Select the an alternative path if required using the browse button available.



Clicking View status report button will open the design summary report in RTF format in MS Word.The design summary report will have details like column reference, size, concrete grade, bar details,status, warnings and error messages for each selected column.

Clicking Browse jobs will open the folder already specified in the initial batch process dialog wherethe RCCD batch jobs are stored.


10/16


Clicking Browse jobs will also close the above dialog automatically. Note that unless the BatchProcess dialog is closed the saved jobs cant be opened in CADS RC Column Designer.

Close button will close the batch process and go back to SCIA Engineer. Note that unless the batchprocess dialog is closed you cant go back to SCIA Engineer.


When the same set of columns are redesigned using the batch process a message will be displayedto warn that the existing jobs will be overwritten with a new set of jobs. Clicking Yes will result inoverwriting the existing jobs. Clicking No will display the first batch process dialog to allow you tospecify a different path for saving the batch jobs. After changing the path and clicking OK the batchprocess will be completed and the status report and batch jobs will be saved in the newly specifiedpath.


11/16


7

RC Pad base Designer (RCPBD) batch processing


Select Pad base designer under CADS BS design module.

From the model select all or specific supports or support nodes that need to be designed / exported.

In the Properties palette set the selection to Current, set the type of loads to Class and select aclass having both SLS and ULS combinations.



12/16




When the New button is clicked an instance of RCPBD will open. After making necessary changesin the design parameters, save the blank job using the `save or `save as command to the desiredpath.

Enter file name for saving the status report: A random file name will be given by the application tosave the status report in RTF file format. Define a new file name if required. This file will be saved in

the selected folder for saving the batch jobs.

Select path for saving RCPBD batch jobs: A default path will be given by the application to storethe batch jobs. Select an alternative path if required using the browse button available.



Clicking View status report button will open the design summary report in RTF format in MS Word.The design summary report will have details like pad base reference, size, concrete grade, bardetails, status, warnings and error messages for each selected support.

Clicking Browse jobs will open the folder already specified in the initial batch process dialog where

the RCPBD batch jobs are stored.

Clicking Browse jobs will also close the above dialog automatically. Note that unless the BatchProcess dialog is closed the saved jobs cant be opened in CADS RC Padbase Designer.


13/16


9



When the same set of bases are redesigned using the batch process a message will be displayed to

warn that the existing jobs will be overwritten with a new set of jobs. Clicking Yes will result inoverwriting the existing jobs. Clicking No will display the first batch process dialog to allow you tospecify a different path for saving the batch jobs. After changing the path and clicking OK the batchprocess will be completed and the status report and batch jobs will be saved in the newly specifiedpath.


14/16


RC Pilecap Designer (RCPCD) batch processing


Select Pile cap designer under CADS BS design module.

From the model select all or specific supports or support nodes that need to be designed / exported.




15/16


11



When the New button is clicked an instance of RCPCD will open. After making necessary changesin the design parameters, save the blank job using the `save or `save as command to the desiredpath.

Enter file name for saving the status report: A random file name will be given by the application tosave the status report in RTF file format. Define a new file name if required. This file will be saved inthe selected folder for saving the batch jobs.

Select path for saving RCPCD batch jobs: A default path will be given by the application to storethe batch jobs. Select an alternative if required using the browse button available.



Clicking View status report button will open the design summary report in RTF format in MS Word.The design summary report will have details like pilecap reference, size, concrete grade, bar details,status, warnings and error messages for each selected support.

Clicking Browse jobs will open the folder already specified in the initial batch process dialog wherethe RCPCD batch jobs are stored.

Clicking Browse jobs will also close the above dialog automatically. Note that unless the BatchProcess dialog is closed the saved jobs cant be opened in CADS RC Pilecap Designer.


16/16




When the same set of pilecaps are redesigned using the batch process a message will be displayedto warn that the existing jobs will be overwritten with a new set of jobs. Clicking Yes will result in

overwriting the existing jobs. Clicking No will display the first batch process dialog to allow you tospecify a different path for saving the batch jobs. After changing the path and clicking OK the batchprocess will be completed and the status report and batch jobs will be saved in the newly specifiedpath.

Notes

1. Any time during batch process if you happen to switch to other windows the above dialog may hidebehind the screen. Use alt+tab keys to select the dialog and bring it to the front of screen.

Documents

SCIA Engineer CADS RC Designers Link Enu