Sk Fert Fa80n Msds Edited

  • Published on

  • View

  • Download

Embed Size (px)


  • 7/23/2019 Sk Fert Fa80n Msds Edited




    SK FERT FA-80N

    1. Identification of the substance/preparation and of the company/undertaking

    Product name




    Emergency telephonenumber

    Material Uses







    SK FERT FA-80N

    E1DF061 /3.021 /F

    Kao Corporation, S.A.Puig dels Tudons, 10 - 08210 BARBER DEL VALLS(Barcelona) - SPAIN Telf. 937399 300. Fax 937399 333

    Kao Corporation, S.A.

    Puig dels Tudons, 10 - 08210 BARBER DEL VALLS (Barcelona)- SPAINTelf. 937399 300. Fax 937399 333

    (+34) 93 73993 00 Notavailable.

    2. Composition/information on ingredients

    Substance/Preparation : Preparation

    3. Hazards identification

    The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.


    Effects and symptoms

    : Xi; R38, 41

    Skin contact : Sensitization of the product: Not available.Hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or,occasionally, blistering.

    Eye Contact : Very hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, wateringand itching.

    Other information : Not available.

    Aggravating conditions : Repeated or prolonged exposure is not known to aggravate medical condition.

    4. First-aid measures

    First-Aid measures



    Skin contact

    Eye Contact





    If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Obtainmedical attention.

    Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to anunconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention ifsymptoms appear.

    In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Removecontaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Obtainmedical attention.

    Check for and remove any contact lenses. In case of contact, immediately flush eyes with a copious amount of

    water for at least 15 minutes. Obtain medical attention immediately.

    Date of issue : 14/04/2003 Page: 1 / 4

  • 7/23/2019 Sk Fert Fa80n Msds Edited


    SK FERT FA-80N

    5. Fire-fighting measures

    Extinguishing Media

    Suitable : SMALL FIRE: Use DRY chemical powder.LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

    Special fire-fighting procedures : Fire fighters should wear self-contained positive pressure breathing apparatus (SCBA) and full turnout gear.Protection of fire-fighters : Be sure to use an approved/certified respirator or equivalent.

    6. Accidental release measures

    Personal Precautions : Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self-contained breathing apparatus should be used to avoid inhalationof the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling thisproduct.

    Environmental precautions and : Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water cleanupmethods on the contaminated surface and allow to evacuate through the sanitary system.

    Note: See section 8 for personal protective equipment and section 13 for waste disposal.

    7. Handling and storage



    Packaging materials

    Recommended use

    : Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residueunder a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. If ingested,seek medical advice immediately and show the container or the label.

    : Keep container tightly closed. Keep container in a cool, well-ventilated area.

    : Use original container.

    8. Exposure contro l s/personal protection

    Engineering measures

    Hygiene measures

    Occupational Exposure Limits

    Personal protective equipment

    Respiratory system

    Skin and body









    Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels belowrecommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposureto airborne contaminants below the exposure limit.

    Wash hands after handling compounds and before eating, smoking, using lavatory, and at the end of day.

    Dust respirator. Be sure to use an approved/certified respirator or equivalent.

    Lab coat.


    Splash goggles.

    9. Physical and che mical properties

    Physical state




    Boiling point

    Melting point

    Dropping Point

    Flash point

    Autoignition temperature

    (20C) :








    Solid. (Paste.)


    Mineral oil

    6.5 - 7.5 (Conc. (% w/w): 0.5) (20 C )

    Not available.

    not available

    45 - 49 C

    Closed cup: >180C (356F).259: Not available.

    Explosive properties

    Oxidizing properties

    Vapour pressure








    Risks of explosion of the product in presence of mechanical impact: Not available.Risks of explosion of the product in presence of static discharge: Not available.

    Not available.

    0.853 g/cm3 (80 C )

    Insoluble in cold water.

    Dispersion Properties : Not available.

  • 7/23/2019 Sk Fert Fa80n Msds Edited


    SK FERT FA-80N

    Date of issue : 14/04/2003 Page: 2 / 4

    Viscosity ( Kinetic ) :

  • 7/23/2019 Sk Fert Fa80n Msds Edited


    SK FERT FA-80N

    Date of issue : 14/04/2003 Page: 3 / 4

    Product Use : Classification and labelling have been performed according to EU directives 67/548/EEC, 1999/45/EC, including amendments and theintended use. - Industrial applications.


    Other information


    Product Code

    Date of printing

    Date of issue

    Date of previous issue














    KCSA - SDS v.01 EU Contextual V3.1.3 2nd ATP

    H F

    Notice to Reader

    To the best of our kno wledge, the inform ation contained herein is accurate. However, neither the above named supplier nor any of its

    subs idiar ies assum es any liabil i ty whatsoever for the accuracy or completeness of the information contained herein.

    Final determin ation of suitabil i ty o f any material is the sole respons ibi l i ty of th e user. All materials may present unkn own hazards andshould b e used with caution. Althou gh certain hazards are described herein, we cannot guarantee that these are the onl y hazards that


    Version 3.021 Page: 4 / 4