Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
MAY 2019 Form no: ZESB094000
Australia 1300 566 287 | komatsu.com.au Komatsu Mining 1300 367 569 | mining.komatsu
New Zealand 0800 566 2878 | komatsu.co.nz New Caledonia 43 53 06
Soft Rock & Hard Rock, Underground Product Guide
12CM12 MB965 mm conveyor width. Load rate 29 tonnes/minute.Cutting Height range 1800mm to 4600mm
UFB-14Up to 1360 MTPH (special applications 1800 MTPH)Breaker pick force – up to 130,000 lbs
4FCT-B/COperated by a single operator using remote controlFlow rates up to 27 tons/minute for coal and 40 tons/minute for salt, trona, gypsum or potash
Stageloaders and Mobile Tail Pieces Tonnage up to 6,000 TPH, Conveyor length up to 70 m,Total installed power up to 700 kW
7LS1Cutting height 1.5 - 3.0 mMachine Weight 52,000 kg
7LS2A & 2BCutting height 1.6 - 3.5 mMachine Weight 59,000 kg
7LS5Cutting height 2.0 - 5.5 mMachine Weight 85,000 kg
7LS6Cutting height - 3.0 - 5.5mMachine Weight 100,000kg
18HDBucket capacity 9.2m3 (12 yd3)Operating weight 53,300 kg (117,500 lbs.)
22HDBucket capacity 11.2 m3 (14.6 yd3)Operating weight 59,091 kg (130,000 lbs.)
10SC42Advanced ergonomics features Rate load capacity 16 tonnes
UFB-17Up to 900 MTPH (special applications 1091 MTPH)Breaker pick force – up to 130,000 lbs
UFB-22Up to 636 MTPHBreaker pick force – 60,000 lbs
UFB-33Up to 1000 MTPHBreaker pick force – up to 130,000 lbs
UFB-38Up to 600 MTPHBreaker pick force – up to 212,000 lbs
Facebolter 30402.1 to 3.2 m operating height range
MB2036Nominal operating range 2.0 to 3.6 m
MB2337Nominal operating range 2.3 to 3.7 m
MB3045Nominal operating range 3.0 to 4.5 m
Quad Bolters2.4 to 5.0 m operating range
CONTINUOUS MINERS
FLEXIBLE CONVEYOR TRAIN
STAGELOADERS & MOBILE TAIL PIECESLONGWALL SHEARERS ARMOURED FACE CONVEYORS
MOBILE BOLTERS
ENTRY DRIVERS
FEEDER-BREAKERS SHUTTLE CAR
Multibolter 2337
Faceboss 7LS6C
SOFT ROCK HARD ROCK SURFACE MINING CONSTRUCTION & UTILITY, QUARRY
12ED25760 mm (30 in.) conveyor widthTotal machine power @950V, 60 Hz 870 kW
12CM30 MBMax 4 roof and 2 rib bolting rigs. 760 mm conveyor width Load rate 27 tonnes/minute. Cutting Height range 1900mm to 4600mm
10SC32 BCRate load capacity 16 tonnes
10SC32 DFeatures a rated load capacity of 30 tonnes (33 tons)
4FCT
Faceboss
Chute - hood Drive frame WinchDrive modules Boot endRoof Structure Belt Storage Loop take up Belt Winder
LOADERS
LOAD HAUL DUMP TRUCKS SHAFT SINKING EQUIPMENT
HYDRAULIC JUMBO DRILLS
TRUCKS
VR-II
JOY
Vein Runner IIBoom coverage maximum of 5.1 m (height) by 5.77 m (wide)Inner and outer turning radius’ of 3.05 m and 5.08 m respectively
DR-2SBBoom coverage of 8.89 m by 6.36 mInner and outer turning radius’ of 4.09 m and 6.7 m respectively
DR-1SBBoom coverage of 5.74 m by 6.34 m Inner and outer turning radius’ of 3.9 m and 6.4 m respectively
DT-3504Rated load capacity of 31,751 kg (70,000 lbs.)
DT-3004Rated load capacity of 27,215 kg (60,000 lbs.)
16TDRated load capacity of 16,000 kg (35,724 lbs.)
7TDRated load capacity of 6,600 kg (14,520 lbs.)
4LDRated load capacity of 4,000 kg (8,800 lbs.)
LT-1051Rated load capacity of 10,000 kg (22,000 lbs.)
LT-650Rated load capacity of 6,591 kg (14,500 lbs.)
LT-270Rated load capacity of 2,722 kg (6,000 lbs.)
Powered Roof SupportRatings up to 2,000+ tonnesHeights from 0.8 to 7.8 meters
POWERED ROOF SUPPORT
Electro-Hydraulic Roof Bolters (EHB)Automatic drill and bolt cycles. Adaptive drilling functionality. Strata mapping and data capture
AFXHeavy duty roof bolter3 tonne feed force
HFXHigh productivity roof bolting2 tonne feed force
HYDRAULIC ROOF BOLTERS
UNDERGROUND CONVEYOR SYSTEMS & TERMINALS
Jumbo Drill360° rotation at top turret for maximized boom coverage
VSM-144.3 m main cylinder stroke
AFCTonnage up to 6,000TPH, Conveyor Length > 400mTotal installed power up to 3 x 1600kW, OPTIDRIVE VSD
Conveyor starter
600mm to 3200mm wide belts
HAC SYSTEMS
Carry Return Impact Flat Garland
CONVEYOR IDLERS
Steel roller & Aluminium roller
Run Red Poly Roller
600mm to 3200mm wide belts
Drive pulleys (Ceramic & FRAS Rubber lagged)
Non-Drive pulleys (Ceramic & FRAS Rubber lagged)
Impact Roller Rubber disc return
600mm to 3200mm wide belts 600mm to 3200mm wide belts
CONVEYOR IDLERS CONVEYOR PULLEYS
Frame
12CM12965 mm conveyor width. Load rate 29 tonnes/minute. Cutting Height range 1800mm to 4600mm
12CM27965 mm conveyor width. Load rate 29 tonnes/minute.Cutting Height range 1800mm to 5000mm
SIZERS
iXRS/XRS 600Up to 1800 MTPH, 0-800mm feed size150/200 (mm) Standard Product Size
XRS/DRX 800Up to 3000 MTPH, 0-100mm feed size150/200/250 (mm) Standard Product Size
JOY
DRS1000
DRX 1000Up to 5000 MTPH, 0-1200mm feed size200/250/300 (mm) Standard Product Size
MVT-II 600Up to 1000 MTPH @ -50mm, 0-250 (mm) feed size25/38/50 (mm) Standard Product Size
MVT-II 800Up to 0-1800 MTPH @ -50mm, 0-350 (mm) feed size50/100 (mm) Standard Product Size
HAC SystemsHigh angle, high volume productivity600mm to 3200mm wide belts