Solar Solutions

Business Unit

Technology

Solar solutionsDKSH provides the expertise for renewable energy

EnergyAustralia

2 DKSH Australia Pty. Ltd., 14-17 Dansu Court, Hallam VIC 3803, Australia. Freecall 1800 010 113, Fax (03) 9554 6677, www.dksh.com.au

MC3 connectors

Preassembled leadsOur preassembled leads are made with high quality Lapp Olflex Solar XLS cable fitted with male and female Multi-Contact connectors. Custom lengths and variations on plug options can be manufactured upon request. Leads manufactured with Multi-Contact FlexSol XL cable are also available.

Male to female 2.5mm² leads

2 metre XPMC3SOL2.5/2M





Male to female 4mm² leads

2 metre XPMC3SOL4/2M





MC3 connector system1000V DC, 30A

Male cable coupler Male panel receptacle Branch plug

Type PV-KST3 II Type PV-ADSP3/GWD Type PV-AZS3

Part number 32.0003 Part number 32.0053 Part number 32.0009

Conductor size (mm²) 2 - 4 Conductor size (mm²) 2 - 4

Cable OD (mm) 4.9 - 7.1

Female cable coupler Female panel receptacle Branch socket

Type PV-KBT3 II Type PV-ADBP3/GWD Type PV-AZB3

Part number 32.0002 Part number 32.0052 Part number 32.0008


Cable OD (mm) 4.9 - 7.1

MC3 MC4

2.5mm² Lapp SDI XPMC3S2.5M20/0.5 2.5mm² Lapp SDI XPMC4S2.5M20/0.5

4mm² Lapp SDI XPMC3S4M20/0.5 4mm² Lapp SDI XPMC4S4M20/0.5

IP68 junction box cable assemblyTwo preassembled leads independently inserted through a double cable entry sealing insert and terminated into a Lapp Skintop M20 IP68 cable gland. Provides for a safe and IP68 rated entry to junction and terminal boxes.Terminated with MC3 or MC4 cable couplers on one end, and 6mm cable lugs on the other end, 500mm total length.

Field assembly tool Crimp tool

PV-RWZ3 32.6050 PV-CZ 32.6008

ToolingCrimp tool and assembly tool required to assemble MC3 connectors.

3DKSH Australia Pty. Ltd., 14-17 Dansu Court, Hallam VIC 3803, Australia. Freecall 1800 010 113, Fax (03) 9554 6677, www.dksh.com.au

MC4 connector system1000V DC, 30A

ToolingA crimp tool is required for reliable connection, spanners are not essential but they do make the job easier. MC4 crimp tool Open end spanner (pair)

PV-CZM19100A 32.6020.19100 PV-MS 32.6024

Preassembled leadsOur preassembled leads are made with high quality Lapp Olflex Solar XLS cable fitted with male and female Multi-Contact connectors. Custom lengths and variations on plug options can be manufactured upon request. Leads manufactured with Multi-Contact FlexSol XL cable are also available.

Male to female 2.5mm² leads






Male to female 4mm² leads






Female cable coupler Female panel receptacle Branch socket

Type PV-KBT4/2.5 I Type PV-ADBP4/2.5 Type PV-AZB4

Part number 32.0010P0001 Part number 32.0054P0001 Part number 32.0018

Conductor size (mm²) 1.5 - 2.5 Conductor size (mm²) 1.5 - 2.5

Cable OD (mm) 3 - 6

Female cable coupler Female panel receptacle

Type PV-KBT4/6 II Type PV-ADBP4/6

Part number 32.0016P0001 Part number 32.0056P0001


Cable OD (mm) 5.5 - 9

Male cable coupler Male panel receptacle Branch plug

Type PV-KST4/2.5 I Type PV-ADSP4/2.5 Type PV-AZS4

Part number 32.0011P0001 Part number 32.0055P0001 Part number 32.0019

Conductor size (mm²) 1.5 - 2.5 Conductor size (mm²) 1.5 - 2.5

Cable OD (mm) 3 - 6

Male cable coupler Male panel receptacle

Type PV-KST4/6 II Type PV-ADSP4/6

Part number 32.0017P0001 Part number 32.0057P0001


Cable OD (mm) 5.5 - 9

MC4 connectors


Adaptor leads manufactured from high quality 4mm² Multi-Contact Flex-SolXL cable fitted with MC3 and MC4 Multi-Contact connectors. Standard length is 20cm.

MC3 - MC4 adaptor leads1000V DC, 19A

Insert suit PV-CZM19100A for MC3 Locator suit PV-CZM19100A for MC3

PV-ES-CZM-16100 32.6021.16100 PV-LOC-A 32.6039

An insert and locator will allow the MC4 crimp tool to also crimp MC3 connectors. Spare tapered spindles are available for the MC3 assy tools.

MC3 - MC4 adaptor leads

PV-A-KBT4/KST3 32.6096

MC3 - MC4 adaptor leads

PV-A-KBT3/KST4 32.6097

MC3 crimp tool Stripping pliers

PV-CZM16100A 32.6020.16100A PV-AZM 32.6027

MC cables and tooling

MC3 spindles to suit

Bench tool 13000357

Field assy tool (orange) 32.6032

Field assy tool (grey) 32.6052

Additional toolingMC3 and MC4 tools

Test plug Safety lock clip

PV-PST 32.6028 PV-SSH4 32.5280

Test plugThis test plug is used to control the corret engagement of the contact in the insulation when assembling MC4.

Safety lock clipThe pluggable safety lock clip secures the MC4 PV plug connection and can only be unlocked with the tool PV-MS.

Junction boxesJunction boxes are also available for PV modules in numerous designs.


Panel mount receptaclesBuilt-in plugs serve for fast, simple connection of cables to devices such as inverters and junction boxes.

TÜV Rheinland: certified• UL: in preparation• Female panel receptacle Male panel receptacle

Part number 44420506 Part number 44420505

Conductor size (mm²) 2.5 - 4 Conductor size (mm²) 2.5 - 4

Cable couplersThe EPIC® SOLAR connector field mountable is preassembled and consists of only two components - the connector part and the SKINTOP® gland. The contact is crimped and the plastic components are simply screwed together. The cable outlet is suitable for cable diameters from 4.5 mm up to 7.3 mm.

TÜV Rheinland: certified•UL: in preparation•

Female cable coupler Male cable coupler


Conductor size (mm²) 2.5 - 4 Conductor size (mm²) 2.5 - 4

Cable OD (mm) 4.5 - 7.3 Cable OD (mm) 4.5 - 7.3

ToolingThe crimp tool serves for simple and reliable crimping of the EPIC® SOLAR products on site.

Crimp tool

Part number 44428001

Y splittersY-splitters make it possible to parallel connect solar modules. Maximum reliability is achieved by means of injection overmolding of the Y-Splitter with OLFLEX® SOLAR cables.

TÜV Rheinland: certified• UL: in preparation•

Female to 2x male - 4mm², 500mm Male to 2x female - 4mm², 500mm


EPIC® SOLAR cabling system1000V DC, 30A

EPIC® SOLAR is a new connector system optimized to meet the requirements of solar technology. EPIC® SOLAR is available as preassembled, injection moulded cable assemblies and as loose connectors. Designed to be ex tremely simple to assemble with no parts that can be lost and minimized possibilities for assembly errors.

EPIC® connectors



2.5mm² 99.201.0000.7 2.5mm² 99.206.0000.7

4mm² 99.202.0000.7 4mm² 99.207.0000.7

6mm² 99.203.0000.7 6mm² 99.208.0000.7

10mm² 99.204.0000.7 10mm² 99.209.0000.7

Wieland DC solar system

Protective cap for female Protective cap for male

Part number 05.566.6380.0 Part number 05.566.6480.0

The gesis® PST 40i1 is based on the need to combine a highly reliable contact system with easy termination technology. The silver-plated machined contacts have been proven in the most demanding applications, such as machine tool construction, crane technology, and ship building; they are also ideally suited for wiring in the field.

The contacts carry their rated current throughout the entire temperature range; there is no need to derate according to temperature. The IP 68 protection rating, the robust design, as well as the ability to mate with the Multi-Contact MC4 system guarantees flexibility for any installations.

BenefitsQuick assembly•UV resistant•High conductivity•IP 68•MC4 compatible•1000V up to 40A•

DC solargesis® PST40 DC connection system

Ready for windElectro-technical solutions for wind energy systems

Wieland Electric – competence and expertise in green energy technologyWieland views itself as a reliable partner in the field of electrical installation. A company offering a vast number of components meeting the highest quality standards, including a modular system with a decisively unifying characteristic: that it is pluggable. At the same time, the system is continually growing and improving. Its reliability and flexibility make it a sound choice for virtually any application, including both fixed installations, as well as those requiring future modifications.


Female panel receptacle M25 Male panel receptacle M25



10-14 mm cable OD 96.031.4154.3 10-14 mm cable OD 96.032.4154.3


With its 3 and 5 pole connector system RST 25i3/i5, Wieland offers the optimal solution for AC connections. Preassembled components and IP68 protection enable a fast and safe installation, even under the most adverse conditions. The RST AC system includes connectors for on-site field wiring and device connectors for inverter housings (leading inverter manufacturers already deliver their product with RST connectors installed).

Inverters are often installed in groups, with the same distance between them. The resulting cable lengths repeat from system to system. The AC side can now be installed similarly to the traditional DC module to module interconnection method.

This concept effectively reduces the logistics and installation times to a minimum. This advantage pays off not only for initial installation, but for any subsequent service or add-on work. For servicing, individual inverters can be disconnected from the mains supply by simply unplugging them. The electrical contacts are touch- protected against accidental contact. A quick installation and return to operation ensures a high yield system.

Some leading inverter manufacturers also use a 3 pole, 20 Amp version.

Female panel receptacle M25 Male panel receptacle M25





AC solargesis® RST 25 Amp connectors for connecting inverters

Wieland AC solar system

Female cable coupler - 20 Amp version Male panel receptacle M25 - 20 Amp version

10-14 mm cable OD 96.031.4153.1 Part number 96.032.5053.1


Multi-Contact Flex-Sol XLTUV approved premium solar cable

Part number

Nominal conductor area mm2

Approx overall Ø mm Stranding Colour

Roll size

mtrs

62.7426.11021 2.5 5.1 50 x 0.25 BLACK 150

62.7426.11022 2.5 5.1 50 x 0.25 RED 150

62.7426.11023 2.5 5.1 50 x 0.25 BLUE 150

62.7427.11021 4 5.8 56 x 0.30 BLACK 100

62.7427.11022 4 5.8 56 x 0.30 RED 100

62.7427.11023 4 5.8 56 x 0.30 BLUE 100

62.7428.11021 6 7.0 84 x 0.30 BLACK 75

62.7428.11022 6 7.0 84 x 0.30 RED 75

62.7428.11023 6 7.0 84 x 0.30 BLUE 75

Description: Single-pole, double insulated solar cable with fine-wire copper strand. The robust, flexible and space-saving design of FLEX-SOL-XL ensures constant electrical and mechanical properties during the whole life of the PV installation.

For the insulation of our FLEX-SOL-XL cables we use a chemically cross-linked compound.

In contrast to radiation cross-linked material this exhibits complete and controlled in-depth cross-linking throughout the thickness of the cable sheath.

FLEX-SOL-XL cables are also flame retardant, halogen-free, and have particularly low smoke emission in case of fire.

Features:- Class 5 tinned - UV resistant- Cross linked sheath - Ozone resistant- 1000 VDC - Black, blue, red- Halogen free - High oil resistance- TUV - High abrasion certification resistance

Cable

Description: An economical tinned twin core, double insulated black UV resistant flexible cable with red and blue inner cores for identification of longer runs.

Australian standards:AS5033 states that PV cables are to be clearly identified so they cannot be mistaken for power cables. This cable meets that requirement without the need for additional labelling.

Features:- Class 5 tinned - UV resistant- PVC/PVC TWIN - Black outer sheath- 900/1500 V DC - Blue and red inner

Cable marking:Caution: DC cable - Do not disconnect under load.

V90HT twin SDIEconomical UV resistant twin cable

Part number


Dimensions mm Stranding

Outer sheath

Roll size

mtrs

3803590 2.5 12.2 x 5.1 50 x 0.25 BLACK 100 - 500

3803591 4 13.8 x 5.9 56 x 0.30 BLACK 100 - 500

3803592 6 15.0 x 6.5 84 x 0.30 BLACK 100 - 500

3803593 10 16.7 x 8.3 80 x 0.40 BLACK 100 - 500

CAUTION: DC CABLE – DO NOT DISCONNECT UNDER LOAD

LAPP KABEL® TWIN V90H-T CABLE 2x4 0.9/1.5KVDC

Also available in other conductor sizes, minimum order quantities apply


Description: Constructed using class 5, fine stranded tinned copper conductors and insulated with cross-linked polymer, armoured with high-grade stainless steel wire braiding (V4A).

Benefits:Stainless high-grade (class V4A) steel •wire braiding protects against rodents and termitesHigh thermal capacity for long lasting •operation of the PV system in all seasons

Features:Excellent UV and weathering resistance•Good resistance against ammonia and •biogasesFlame retardant according IEC •60332-1-2900/1500 V DC•

Olflex® Solar V4AHigh-grade steel armoured solar cable

Part number


Approx overall Ø mm Stranding

0025960 4 7.0 56 x 0.30

0025961 6 8.0 84 x 0.30

Olflex® Solar XLSCross-linked industry standard solar cable

Part number


Approx overall Ø mm Stranding

Inner sheath

Outer sheath

Roll size

mtrs

0025805 2.5 5.4 50 x 0.25 BLACK BLACK 100 - 500

0025806 2.5 5.4 50 x 0.25 RED BLACK 100 - 500

0025810 4 6.0 56 x 0.30 BLACK BLACK 100 - 500

0025811 4 6.0 56 x 0.30 RED BLACK 100 - 500

0025815 6 7.1 84 x 0.30 BLACK BLACK 100 - 500

0025816 6 7.1 84 x 0.30 RED BLACK 100 - 500

0025820 10 8.9 80 x 0.40 BLACK BLACK 100 - 500

0025821 10 8.9 80 x 0.40 RED BLACK 100 - 500

0025825 16 9.8 128 x 0.40 BLACK BLACK 100 - 500

0025826 16 9.8 128 x 0.40 RED BLACK 100 - 500

Description: Constructed using class 5, fine stranded tinned copper conductors, and insulated with cross-linked copolymer compound and protected by an outer sheath of black, UV resistant, halogen-free cross-linked copolymer.

Benefits:Reduced spreading of fire source and •formation of toxic combustion gases in event of fireExact quantity control during installation •by meter marking on the cable sheath

Features: Weathering, abrasion, and UV resistant•Good heat pressure resistance•Halogen-free and flame retardant•Resistant against ammonia and •biogases, oxalic acid, sodium hydroxide, and other chemical media900/1500 V DC•

Cable

Note: Please add “S” to the end of the part number to receive 100 mtr rolls, i.e. 0025810S = 4mm2 100mtr roll


Black / Orange Construction: Class 6 super fine copper wire, White TPR flame-retardant insulation, flame retardant, ozone, oil & UV resistant, orange or black meter marked TPR sheath. Other colours available on request subject to minimum order quantity and lead time.

Earth Construction: Class 6 super fine copper wire. Green / Yellow flame retardant, ozone, oil & UV resistant, TPR meter marked insulation.

Minimum Bending Radius:Fixed: 5 x cable diameterFlexing: 15 x cable diameter

Nominal Voltage: 600/1000V

Temperature Range: -30oC to +90oC

Cable

Wind energy plays an important role in the Lapp Group. To reflect the importance of this industry, the SBU Wind (Strategic Business Unit Wind) has been set up, and specialises in products and services for the industry.

No matter which cables our customers choose for their wind turbines, they can

count on the very highest standards in terms of function, reliability and service life every time. We have summarised the products that are already being used in nacelles, towers or the drip loop for you in our new “Special wind energy catalogue”.

Wind powerLapp cable, connectors and accessories for wind energy

TP90 Rubber SDI & EarthSuper flexible industrial standard power, welding & Earth cable

Orange sheath

Blacksheath Earth

Nominal conductor area mm2 Stranding

Approx overall Ø mm Black/orange

Approx overall Ø mm

Earth

3801451 3801781 3801520 1 x 6 190 x 0.2 7.8 5.1

3801452 3801782 3801521 1 x 10 318 x 0.2 8.8 6.6

3801453 3801783 3801522 1 x 16 513 x 0.2 10.2 8.2

3801454 3801784 3801523 1 x 25 783 x 0.2 11.5 10.0

3801455 3801785 3801524 1 x 35 1107 x 0.2 12.9 11.4

3801456 3801786 3801525 1 x 50 1566 x 0.2 14.8 12.5

3801457 3801787 3801526 1 x 70 2214 x 0.2 17.4 15.2

3801458 3801788 3801527 1 x 95 2997 x 0.2 19.7 17.0

3801459 3801789 3801528 1 x 120 950 x 0.4 21.8 18.2

3801460 3801790 - 1 x 150 1184 x 0.4 24.1 -

3801461 3801791 - 1 x 185 1445 x 0.4 26.6 -

3801462 3801792 - 1 x 240 1908 x 0.4 29.8 -

3801463 3801793 - 1 x 300 2383 x 0.4 33.9 -


Protection

Cells and inverters are very sensitive to overvoltage and impulse currents, such as switching and lightning surges. The ABB surge arrester range for special DC limits the overvoltage to an acceptable level for the equipment to be protected and prevent damage to installations. Therefore, the risk of financial losses should be taken into account when considering an investment in solar panels. One of the benefits of using SPDs is a better return on investment.

Lightning and overvoltage protectionProtection devices for PV installations

Location Type Role Options Comment

A DC Protection of cells If the distance L1 < 10 m, only OVR PV in A or B is recommended.

Connection to the chassis should be as short and rectilinear as possible. The lightning arrester depending on the environment should

be installed in a leak-proof casing.

B DC Protection of the inverter input on the DC side

If the distance L1 < 10 m, only OVR PV in A or B is recommended.

Connection to the earthing bar and to the ground of the inverter on the DC side should be as short and rectilinear as possible.

C AC Protection of the inverter output on the AC side

Routine installation Connection to the earthing bar and to the ground of the inverter on the AC side should be as short and rectilinear as possible.

D AC AC head protection at the entrance of the building

Routine installation Connection to the earthing bar should be as short and rectilinear as possible.

ABB protection devicesComponent supplier for residential and power plant application

ABB has been working for many years, as both a manufacturer and supplier, to offer products and solutions that reduce the environmental impact of energy systems. In a world of ever diminishing resources and soaring energy demand, the focus of ABB’s research lies in developing efficient and sustainable ways to generate, transmit, distribute and use electrical energy.

With vast experience in Automation Products, ABB is constantly searching for new ways to expand and enhance existing technologies to meet the needs of its customers. In a society where climate change is becoming an ever stronger argument for increased use of clean energy, such as wind or solar power.

ABB represents the best supplier for OEMs, installers and general contractors, offering a complete portfolio of products to support development of the renewable energy market. For the photovoltaic market, ABB supplies a comprehensive range of high technology products for virtually every residential, commercial and power plant application to grant its customers access to renewable sources of energy.

An investment in a solar plant is an investment in and for the future. The profitability calculation derived from the amount invested, term of financing and amortisation is based on factors such as the size and output of the system, climatic conditions and the general conditions arising from the geographical/regional installation location.

Although the risk presented to the systems by lightning, over- and reverse currents and overvoltage can be defined statistically, there are always elements of uncertainty. Therefore, ABB sees integrated solutions for overvoltage protection as an absolute prerequisite. These take the form of tried-and-tested components which ensure that the level of income corresponds to the forecasts for your development.


Part numberLightning

rod

Surge arrestor location

**OVRT13N25255TS* Yes D

OVRT21N40275P Yes C

**OVRT23N70275sP No D

OVRT21N15275P No C

Selection of lightning arresters, AC portion

Part numberInverter U max.

Current flow capacity

Voltage protection level up

(L-L / L-PE)

Surge arrestor

location

OVRPV40600P 500 & 600 V 40 kA 2.8 / 1.4 kV A B

OVRPV40600PTS* 500 & 600 V 40k A 2.8 / 1.4 kV A B

OVRPV401000P 1000 V 40 kA 3.8 kV A B

OVRPV401000PTS* 1000 V 40 kA 3.8 kV A B

Selection of surge arresters, DC portion

Lightning and overvoltage protectionResidential application

Protection

Part number Voltage

OVRPV40600C 600V

OVRPVMC 600V Neutral

OVRPV40-1000C 1000V

Cartridges for maintenance

600V OVR PV surge arrestor block (A or B)

1000V OVR PV surge arrestor block (A or B)

TS* : auxillary contact **also available in 1 pole + neutral (1N)


Lightning and overvoltage protectionPower plant application

Protection

Part number Signal Voltage

OVRTC06VP 6V

OVRTC12VP 12V

OVRTC24VP 24V

OVRTC48VP 48V

OVRTC200FRP 220V

OVRTC200VP 220V

Surge arrestors for data

TS* : auxillary contact **also available in 1 pole + neutral (1N)

Part numberLightning

rod

Surge arrestor location

**OVRT13N25255TS* Yes D

OVRT21N40275P Yes C

**OVRT23N70275sP No D

OVRT21N15275P No C

Selection of lightning arresters, AC portion

Part numberInverter U max.

Current flow capacity

Voltage protection level up

(L-L / L-PE)

Surge arrestor

location

OVRPV40600P 500 & 600 V 40 kA 2.8 / 1.4 kV A B

OVRPV40600PTS* 500 & 600 V 40k A 2.8 / 1.4 kV A B

OVRPV401000P 1000 V 40 kA 3.8 kV A B

OVRPV401000PTS* 1000 V 40 kA 3.8 kV A B

Selection of surge arresters, DC portion


Protection

800V DC circuit breakersMaximum safety for use in photovoltaic systems

Current rating (A)

Icu (kA)

2 pole 800V DC

3 pole 1200V DC

10 5 S802PVS10 S803PVS10

13 5 S802PVS13 S803PVS13

16 5 S802PVS16 S803PVS16

20 5 S802PVS20 S803PVS20

25 5 S802PVS25 S803PVS25

32 5 S802PVS32 S803PVS32

40 5 S802PVS40 S803PVS40

50 5 S802PVS50 S803PVS50

63 5 S802PVS63 S803PVS63

80 5 S802PVS80 S803PVS80

100 5 S802PVS100 S803PVS100

125 5 S802PVS125 S803PVS125

440/500V DC circuit breakersMaximum safety for use in photovoltaic systems

ABB’s well established System proM S280 range of MCBs (miniature circuit breakers) has been further extended to include UC (Universal Current versions) which feature the K tripping characteristic which is the optimal solution for the safe protection of cables. A permanent magnet assists in the forced extinguishing of the DC arc.

Rated voltage:440V•

Maximum operating voltage:500V•

Current rating (A)

Icn (kA)

2 pole 440/500V DC

6 6 S282UCK6

10 6 S282UCK10

16 6 S282UCK16

20 6 S282UCK20

25 6 S282UCK25

32 6 S282UCK32

40 6 S282UCK40

50 6 S282UCK50

63 6 S282UCK63

Locking device:Prevents unauthorized operation of the operating lever. Suits 3mm Ø padlockPart number: SA1

Locking device:Prevents unauthorized operation of the operating lever. Suits 4mm Ø padlockPart number: S800-PLL

The high-performance MCB S800PV-S specially developed for use in photovoltaic systems offers reliable protection for PV modules and lines against reverse currents from defective strings and AC regenerative feedback due to defective inverters. The high demands of PV systems have been taken into consideration in the development of the S800PV-S:

More comfort:Disconnector properties for comfortableswitching even under load.

More voltage:Higher nominal voltage range up to 1200VDC (3 pole). Rated continuous current up to 125A.

More accessories:Wide range of accessories, for example for remote switching, fault signalling and external driving.

More space:Highly compact dimensions for space-saving installation on the DIN rail.

Non Polarised:Polarity independant design, can be used for string protection.


Protection

IP65 rated DC isolation made easy. Simply plug your PV array cables into the isolator, then fit your conduit for the run to the inverter. No more messing around with glands and/or silicone.

DC input is pre wired to eliminate polarity errors. Manufactured using premium quality ABB circuit breakers & box and Multi-Contact PV connectors.

BenefitsEliminates polarity errors on input•Genuine Multi-Contact connectors•IP65•MC4 and MC3 versions•500V DC & 800V DC models available•Plug and play •Lockable•Unit is supplied complete•Custom versions also available•

Voltage Type 10A 16A 20A 32A

500V DC MC3 XPMC3500VDC/10A XPMC3500VDC/16A XPMC3500VDC/20A XPMC3500VDC/32A




IP65 DC isolatorQuick, simple, IP65 DC isolation

AC rated miniature circuit breakers6kA C curve, single and 3 pole

ABB MCBs satisfy the most common requirements in terms of MCBs, for use in domestic, industrial, and commercial applications. All the MCB´s comply to IEC/EN 60898 and IEC/EN 60947-2 standards.

Type 1 pole 3 pole

6 Amp S201C06 S203C6

10 Amp S201C10 S203C10

16 Amp S201C16 S203C16

20 Amp S201C20 S203C20

25 Amp S201C25 S203C25

32 Amp S201C32 S203C32

40 Amp S201C40 S203C40

50 Amp S201C50 S203C50

63 Amp S201C63 S203C63

Polycarbonate enclosuresIP65 2/4 pole

Part number 2/4 Pole

LE12742 100x160x100

LA12866 Barrel lock to suit

LE12742.LOCK Enclosure & lock (kit)


Protection

DIN rail mount fuse carriers600 and 1000V DC, 10 x 38mm fuse

Part number 1000V DC description

PCF10DCP1 1 pole carrier



PCF10DCP1S 1 pole carrier and LED indicator



PV series fuses600 and 1000V DC, 10 x 38mm fuse

Part number Rating

DCM6 6 A 600V DC

DCM8 8 A 600V DC

DCM10 10 A 600V DC

DCM12 12 A 600V DC

DCM15 15 A 600V DC

DCM20 20 A 600V DC

DCM25 25 A 600V DC

DCM30 30 A 600V DC

600V DC fusesFast acting, high-interrupting capacity, current limiting type fuse, especially designed for DC applications.

1000V DC fusesThe short-circuit conditions associated with solar panels do not allow for sufficient current to open a standard fuse in a way that effectively isolates faulted photovoltaic (PV) strings. The new Cooper Bussmann® PV Fuse line provides a full range of protection that traditional fuses cannot.

Part number Rating

PV3A10F 3 A 1000V DC




PV10A10F 10 A 1000V DC

PV12A10F 12 A 1000V DC

PV15A10F 15 A 1000V DC

PV20A10F 20 A 1000V DC

Part number 600V DC description

VLC10P1 1 pole carrier



1000V fuse carriersPCF 10DC are the next generation of fuse disconnectors, which comprise the well known qualities from previous versions and offer the following additional advantages:

extraction of entire fuse-link when •changingchamber for spare fuse-link•new type of mounting on the rail and •simple replacementdouble connection clamp•LED indicator version with light conduit•option of mounting auxiliary devices•sealing possibility•

Voltage and Rating: 690VAC (32A)1000VDC (20A)900VDC (25A)

Cable size max: 0.5 to 10mm2/AWG 8 - 20 (solid)

Approvals: IEC60947-1, IEC 60947-3, EN60947-1, EN60947-3

600V DC fuse carriers 1000V DC fuse carriers


As PV system designs become larger to maximize return on investments, the need for PV string protection is becoming more common.

We are proud to announce the release of a new string protection system. Available in numerous current ratings, these PV String Fuse Boxes are manufactured with premium components. Fusing is rated at 1000V DC and designed specifically for PV systems.

Most DC rated circuit breakers are polarised and are not suitable for string protection, therefore fusing is required.

No more need to spend hours in the workshop building these units when you could invest your time in more profitable exercises.

BenefitsGenuine MultiContact MC4 connectors•1000V DC rated fuses•0.6/1kV Lapp cabling•Available in numerous configurations•Plug and play •Unit is supplied complete•One, Two and Three string designs•Custom versions also available•

Current rating (A) 1 String Fuse Box 2 String Fuse Box 3 String Fuse Box

4A XPMC4FUSE1/4A XPMC4FUSE2/4A XPMC4FUSE3/4A






Protection

String protection1000V DC


Miniature circuit breakers6kA C curve, single and 3 pole

ABB MCBs satisfy the most common requirements in terms of MCBs, for use in domestic, industrial, and commercial applications. All the MCB´s comply to IEC/EN 60898 and IEC/EN 60947-2 standards.

Type 1 pole 3 pole

6 Amp S201C06 S203C6

10 Amp S201C10 S203C10

16 Amp S201C16 S203C16

20 Amp S201C20 S203C20

25 Amp S201C25 S203C25

32 Amp S201C32 S203C32

40 Amp S201C40 S203C40

50 Amp S201C50 S203C50

63 Amp S201C63 S203C63

Protection

Residual current circuit breakers (RCCB)B Type, DC applications

Residual current devices ensure protection of people and installations against fault current to earth and fire risks. An RCD B type is required on the AC side in case of lack of electrical separation between the AC and DC side.

The devices save money and improve global efficiency by using PV converters without an internal insulation transformer.

The RCCBs F202 PV B and F204 B are intended for installation of single and three phase PV converters. They protect against fire risks and leakage currents.

Other models available, please enquire for more information.

F200 B type For smooth DC earth fault current

F200 B selective type For smooth DC earth fault current

F200 PV B type For smooth DC earth fault current for PV applications

Function: protection against the effects of sinusoidal alternating, direct pulsating and pulsating DC or smooth DC earth fault currents; protection against indirect contacts and additional protection against direct (with I∆n=30 mA) contacts.

Function: protection against the effects of sinusoidal alternating, direct pulsating and pulsating DC or smooth DC earth fault currents with an intentional tripping delay, which permits to realize the selectivity with downstream instantaneous devices; protection against indirect contacts.

Where an electrical installation includes a PV power supply system without at least simple separation between the AC side and the DC side, an RCD installed to provide fault protection by automatic disconnection of supply should be type B according to IEC 60755.

Part numberRated residual current I∆n mA

Rated Current In A Part number

Rated residual current I∆n mA

Rated Current In A Part number

Rated residual current I∆n mA

Rated Current In A

F204B-40/0.03 30 40 F204BS-63/0.3 300 63 F202PVB-25/0.03 30 25

F204B-63/0.03 30 63 F202PVB-63/0.03 30 63

F204B-63/0.3 300 63

AC rated devices


Properties of the EasyLine XLP:Quick-make operation device•Integrated IP 20 cable termination•IP 30 degree of protection from the •frontReplacement compatible to similar •types in the marketVoltage measuring from the front•V-0 plastic materials •Easy to install•Easy to snap on DIN rails•Easy to operate•Easy to recycle•

Applications of EasyLine fuse protection:

Switchboards•Distribution systems•OEM’s•

Part number Current rating

XLP000 100 Amp

XLP00 160 Amp

XLP1 250 Amp

XLP2 400 Amp

XLP3 630 Amp

3 pole disconnectorsEasyline series

AC rated devices

IP66 switch isolatorEnclosed isolator

Suitable for switching and isolating applications where a high level of dust and water ingress protection is required. Padlockable in the OFF and ON positions.Dimensions: 83(W)x167(H)x73(D)mm.

Not suitable for switching DC under load.

Part number Contacts Current

WSD220 2 20 Amp

WSD232 2 32 Amp

WSD245 2 45 Amp

WSD263 2 63 Amp

WSD420 4 20 Amp

WSD432 4 32 Amp

WSD445 4 45 Amp

WSD463 4 63 Amp

Metering devices for ACODINsingle 65A

ODINsingle is intended for mounting on a DIN rail and is designed in accordance with the ABB Pro M standard.

General FeaturesODINsingle is an active energy, single phase meter for direct metering up to 65A. The LCD display has 6 digits, 6 mm high to ensure easy reading. ODINsingle is made compact, only 2 modules (35 mm) to save space in the installation. A red LED at the front flashes proportionally to the energy consumed. ODINsingle has a temperature range from -25 to +55 (storage +70 °C)

CommunicationODINsingle has 3 ways to communicate depending on type.

Display at front•Pulse output (option)•IR interface for serial communication •(together with serial communication adapter)

Type ApprovalAll ODINsingle types are tested and approved according to MID, EN 50470-1, EN 50470-3, IEC 62052-11 and 62053-21. These standards cover all technical aspects of the meter like climate conditions, electromagnetic compatibility (EMC), electrical requirements, mechanical requirements and accuracy.

Part number Voltage Current

OD1065 230 V 65 A


Thermoplastic IP55 Thermoplastic IP55 Polycarbonate IP65

Part numberInternal dimensions

L x W x D (mm) Part number PolesDimensions

WxHxD (mm) Part number 2/4 Pole

LE00852 153 x 110 x 66 LE12644 4 125x180x105 LE12742 100x160x100

LE00854 160 x 135 x 77 LE12646 6 160x180x105 LA12866 Barrel lock to suit

LE00856 220 x 170 x 80 LE12650 10 230x180x105 LE12742.LOCK Enclosure & lock (kit)

Plastic IP55 - IP65

Enclosures

SteelPowder coated and stainless steel

Lohmeier have a proud tradition of providing high quality installation enclosure systems, with a wide range of metal enclosures, from terminal boxes and wall mounted to floor standing enclosures. Available in powder coated and stainless steel.

Amelan® (PBT) thermoplasticIP67

AMELAN® has a high resistance to chemicals, e.g. fuels, diluted acids and bases, most watery saline solutions and aliphatic hydrocarbons. The AMAXX enclosure is fitted with captive screws with a double thread for swift opening and closing. With the window opening towards the bottom, the electrician has both hands free, e.g., for measurements or for changing fuses. The window can be locked using a padlock. All external screws are stainless steel. A unique feature is the DIN rail can be pulled out and the large, smooth wiring space makes insertion and connection of cables even more convenient.

Ideal for larger installations, harsh environments or allowing for future expansion of the PV system.

Ingress protectionIP67 Dimensions225x130x170mm (WxHxD)10 pole Cable entry (threaded)2 x M20 at the top (closed)2 x M20 at the bottom (closed)2 x M25 at the top (closed)2 x M25 at the bottom (closed)

Part number Poles

ME910387 10


Supplied with locknut Metric thread Cable Ø range (mm)

53111206 M 12 3.5 – 7

53111216 M 16 4.5 – 10

53111226 M 20 7 – 13

53111236 M 25 9 – 17

53111246 M 32 11 – 21

53111256 M 40 19 – 28

53111266 M 50 27 – 35

53111270C M 63 34 – 45

Glands

Skintop® ST-MBlack polyamide cable gland

Material:Body: Polyamide

Temperature range:-20oC to +80oC

Protection class:IP 68

Skintop® DIX-MMultiple sealing insert for SKINTOP® metric cable glands

Part numberSuits

gland

No. of cables x

cable Ø mm Part numberSuits

gland

No. of cables x

cable Ø mm

53320250 M 20 2 x 5 53332270 M 32 2 x 7

53320260 M 20 2 x 6 53332280 M 32 2 x 8

53320353 M 20 3 x 5.3 53332290 M 32 2 x 9

53325260 M 25 2 x 6 53332370 M 32 3 x 7

53325350 M 25 3 x 5 53332380 M 32 3 x 8

53325360 M 25 3 x 6 53332460 M 32 4 x 6

53325370 M 25 3 x 7 53332470 M 32 4 x 7

53325450 M 25 4 x 5 53332560 M 32 5 x 6

53325540 M 25 5 x 4 53332460 M 32 4 x 6

Skintop® CLICKCable glands without locknuts for quick assembly

Material:Body: Special polyamide


Protection class:IP 68 - 5 bar

Part number Size ColourCable Ø

range (mm)Pack size

53112686 M 16 Light grey 5 - 9 50

53112882 M 16 Black 5 - 9 50

53112687 M 20 Light grey 7 - 13 25

53112883 M 20 Black 7 - 13 25

53112688 M 25 Light grey 9 - 17 25

53112884 M 25 Black 9 - 17 25

The most innovative cable insertion system on the market for very fast, highly flexible assembly with all the proven properties of our SKINTOP® cable glands in use world-wide. Simply click in - turn to left - turn to right - finished. Result: fixed, centred, strain relief, and IP68 protection in seconds.

Turns the SKINTOP® cable gland into a multiple gland. A sealing ring with several holes is used in place of the inner sealing insert. The SKINTOP® DIX-M multiple sealing insert enables several cables to be fed simultaneously through one gland whilst retaining IP68.


Selos WKNScrew connection with universal foot for DIN mounting

Feed through terminals

Description 2.5mm2 4mm2 6mm2 10mm2 16mm2 Double 4mm2

Terminal grey 57.503.0055.0 57.504.0055.0 57.506.0055.0 57.510.0155.0 57.516.0155.0 57.404.7055.0

Terminal blue 57.503.0055.6 57.504.0055.6 57.506.0055.6 57.510.0155.6 57.516.0155.6 -

Terminal red - 57.504.0055.5 - - - -

Terminal white - 57.504.0055.2 - - - -

Terminal black - 57.504.0055.1 - - - -

End plate grey 07.311.0155.0 07.311.0155.0 07.311.0255.0 07.311.6655.0 07.311.6755.0 07.311.4055.0

Partition grey 07.311.1155.0 07.311.1155.0 07.311.1255.0 07.311.7655.0 07.311.7755.0 07.311.5055.0

Jumper bar Z7.280.0027.0 (80 poles)

Z7.281.0027.0 (70 poles)

Z7.282.0027.0 (40 poles)

Z7.283.6027.0 (40 poles)

Z7.284.2027.0 (30 poles)

Z7.210.3027.0 (70 poles)

Fused and earth terminals

Description5 x 20 fuse

4mm2

6.3 x 32 fuse 4mm2

6.3 x 32 fuse 10mm2

Double earth 4mm2

Earth 4mm2

Earth 6mm2

Terminal 57.904.5355.0 57.904.6355.0 57.910.5355.0 57.504.9255.0 57.504.9055.0 57.506.9055.0

End plate Fully enclosed Fully enclosed 07.311.4155.0 Fully enclosed Fully enclosed Fully enclosed

Description 35 x 7.5mm 35 x 15mm Plastic Metal foot

2 metre, non-slotted 98.300.0000.0 - - -

2 metre, slotted 98.300.1000.0 98.370.1000.0 - -

End bracket - - Z5.522.7453.0 Z5.522.8553.0

DIN railDin rail and end brackets

Terminals

Selos terminals have a low profile, narrow width, and a universal foot that provides firm seating on the mounting rail, with protection against reverse mounting.

Hardened steel clamping bodies provide vibration-resistant clamping of conductors and current bars, as well as permitting multiple terminations without impairment of connection security.


Wire ferrulesDesigned for single insulated V90HT flexible building wire

Part number Wire size (mm2) Colour Pack size (PCS)

CF050 0.5 White 500

CF075 0.75 Light blue 500

CF100 1 Red 500

CF150 1.5 Black 500

CF250 2.5 Grey 500

CF400 4 Orange 500

CF600 6 Green 100

CF1000 10 Brown 100

CF1600 16 White 100

CF2500 25 Black 50

Part number Wire size (mm2) Stud size (mm) Pack size (PCS)

S2.5-4 2.5 4 100

S2.5-5 2.5 5 100

S2.5-6 2.5 6 100

S2.5-8 2.5 8 100

S4-5 4 5 100

S4-6 4 6 100

S4-8 4 8 100

S4-10 4 10 100

S6-5 6 5 100

S6-6 6 6 100

S6-8 6 8 100

S6-10 6 10 100

Accessories

Cable ties Heat shrink Insulating tape

Part numberLength x

Width (mm) ColourPack size Part number Description

Size (mm)

Length(mtr) Part number Description

Length (mtr)

Pack size

CT102B 100 x 3.2 Black 100 CHSB5BK Black handypack 5 7 ITRP PVC Rainbow 20 10

CT143B 150 x 3.6 Black 100 CHSB10BK Black handypack 10 4.5 ITBK/10 PVC Black 20 10

CT194B 203 x 4.8 Black 100 CHSB10RED Red handypack 10 4.5 NO.15NITTO Self Fusing Black 10 1

CT280BK 300 x 4.8 Black 100 CHSB13BK Black handypack 12 4

CT300HBK 300 x 7.6 Black 100 CHSB13RED Red handypack 12 4

CT370B 385 x 4.8 Black 100 CHSB16BK Black handypack 16 2.8

CT373B 370 x 7.6 Black 100 CHSB16RED Red handypack 16 2.8

CT550B 550 x 8 Black 100 CHSB19BK Black handypack 19 2.2

CT550HB 550 x 13 Black 100 CHSB25BK Black handypack 25 1.8

Other sizes and colours of heatshrink and cable ties also available on request

Cable lugsElectro-tin plated high conductivity copper


Liquid tight IP 68 conduit

RORHflex® PA6 Conduit

Part number Conduit size Outer Ø mm Inner Ø mm Coil length mtrs

0233.202.010 M12 13.0 10.0 50m

0233.202.012 M16 15.8 12.0 50m

0233.202.016 M20 21.2 16.5 50m

0233.202.023 M25 28.5 23.0 50m

0233.202.029 M32 34.5 29.0 25m

0233.202.036 M40 42.5 36.0 25m

0233.202.048 M50 54.5 48.0 25m

Application:Due to the long life span of PV arrays, Industrial grade conduit should be used to maximise the life of your installation, don’t risk domestic or commercial grade conduit on PV installations.

Construction: Internally and externally corrugated PA6 plastic tubing.


Colour:Black.

Protection class:Conduit: IP68Fittings: IP65 - IP67

Properties:Oil resistant up to + 80• o CBenzine resistant•Highly resistant to acid and solvents•Free of silicone, cadmium, halogen•Flame retardant, self-extinguishing•UV-resistant•

ROHRflex® PA6Industrial standard conduit

Part number For conduit size Thread size Pack qty

RQW1-M (IP 65)

5020.051.212 M12 M12 50

5020.051.218 M16 M16 50

5020.051.222 M20 M20 50

RQB90-M (90o Bend - IP 67)

5103.013.216 M16 M12 50

5103.015.220 M16 M20 50

5103.021.220 M20 M20 50

5103.028.225 M25 M25 25

5103.034.232 M32 M32 25

5103.042.240 M40 M40 10

5103.054.250 M50 M50 5

RQB1 45-M (45o Bend - IP 65)

5101.013.216 M16 M12 50

5101.021.220 M20 M20 50

5101.042.240 M 40 M 40 10

Locknuts to suit fittings

Part number Thread size Pack qty

5311 9100 M12 100

5311 9110 M16 100

5311 9120 M20 100

5311 9130 M25 100

Mounting clip - RQS (One piece clamp)

Part number For conduit size Pack qty

5030.020.209 M12 50

5030.020.211 M16 50

5030.020.216 M20 25

5030.020.221 M25 25

5030.020.229 M32 25

5030.020.236 M40 25

5030.020.248 M50 10

FLEXAquick fittings - no assembly tools required!

RQG1-M (Straight - IP 66)

Part number For conduit size Thread size Pack qty

5020.055.214 M12 M16 50

5020.055.216 M16 M16 50

5020.055.218 M16 M20 50

5020.055.220 M20 M20 50

5020.055.222 M20 M25 50

5020.055.225 M25 M25 25

5020.055.228 M25 M32 25

5020.055.232 M30 M32 25

5020.055.240 M40 M40 25

5020.055.250 M50 M50 10

Other industrial conduit types also available


The SEM battery connector from Multi-Contact is suitable for the internal connection from battery to control unit or motor, also suitable for external connection to charging stations.

Features:Non interchangeable 2 pole and 3 pole •connectorSafe, lockable connection with fixing •bracketConnector can be coded•Silver plated•IP65•Touch protected•-40• °C to +150°C

Electric vehicles

Everyone agrees that the future belongs to electric drives. The paths for developing electric cars were defined in the master plan of the German Federal Government, the political committees of the EU as well as in the USA and Asia. The German Federal Government even plans to turn Germany into the leading European nation with respect to electromobility by 2020.

The German Manager Magazine estimates that there will be over 2.5 million electric cars on the roads in Germany by 2020. According to Ferdinand Dudenhöffer, director of the Center of Automotive Research at the FH Gelsenkirchen, each car sold in the year 2025 will have at least a hybrid drive. This is why all leading vehicle manufacturers are working at full speed to develop electric cars for serial production.

Solutions for powerful compact batteries are being developed at the same time.

Decisive for the mass acceptance of electric cars is the development of a corresponding charging infrastructure to be able to recharge the electric cars.

The most important prerequisite for this is above all a uniform charge socket and the corresponding plug. As a specialist for plug-type connections, MENNEKES contributes its know-how to this future-oriented business field.

E-vehiclesMennekes develops charging systems

Battery connector2/3 pole 630V 330A power contacts and 4 pole 250V 16A pilot contacts


Climate change is now an ethical issue for most people and their governments world-wide. And for companies serious about corporate responsibility as well as cost reduction, the Smart Building is now a priority. Intelligent building controls significantly reduces energy consumption and carbon footprint.Building controls work together, autonomously or centrally, to realise substantial reductions in energy consumption from monitoring and control of the building environment.

Constant Daylight (Daylight Harvesting)The DURA-TECH DLC100/200 lighting control module from DKSH has Constant Daylight (Daylight Harvesting) and dimming capabilities, helping to make your commercial lighting more energy-efficientWhile there are many strands to carbon footprint reduction, commercial lighting is probably the most visible and emblematic of the struggle.We all know that changing to low energy light bulbs can reduce energy consumption. But such lighting is still often left on when rooms are empty, dramatically illustrated by any night-time city skyline. Plus there is the residual heat generated which causes extra load on a facility’s air conditioning plant.

Constant DaylightSimple timers can reduce some of this overhead, as can presence detection (which automatically switches lights on and off when someone enters/leaves a room) or absence detection (which requires manual light activation but automatically switch off when someone leaves.) But now there is a smarter and greener adjunct to these tools: Constant Daylight (also known as Daylight Harvesting.)

The idea behind Constant Daylight/Daylight Harvesting is simple: using a combination of presence/absence detectors, light level detection and a lighting controller. The lighting of a room adjusts to complement current natural light, producing a comfortable, constant lighting load which is switched off when occupancy has ceased.

Using less powerSo effective is Constant Daylight that in a recent installation, on a typically overcast spring day, the ambient light level in a classroom of 15 sq m at a steady 300 lux used 60 per cent less power than conventional lighting. And in some cases, a bright, sunny day enables Constant Daylight to eliminate artificial light use altogether. Obviously Constant Daylight cannot be used at night, but presence/absence detection means that full lighting is only used when a room is occupied, changing your building to a low-carbon gap in the night skyline.

That’s why Constant Daylight/Daylight Harvesting is a powerful and cost effective tool in your quest for ever greater carbon footprint reductions.

Wieland GESIS modular wiringUsing the Wieland GESIS wiring system dramatically reduce installations costs. The GESIS system not only provides control, but also distributes AC power around the building. Simply plug in the DLC100/200 Light Control Module with Daylight Harvesting to the GESIS cable, and then connect lights using pre-made leads and connectors, it’s that simple.

Energy management

Lighting control moduleIntelligent lighting


Energy management

Lighting control moduleIntelligent lighting

Features DLC100 DLC200

DIN Rail Mounting Yes Yes

Busbar Mounting Yes Yes

Slab Mounting Yes Yes

Size mm(w x l x h) 200x130x35 295x185x35

Enclosure Material Steel Steel

Warranty 3 Years 3 Years

Input Voltage 110-240v 110-240v

Input GST18i3 GST18i3

Outputs GST18i4 GST18i6

Max Load 10A 10A

Load Incandescent 10A 10A

Load Fluorescent 10A 10A

Load Compact Fluorescent

10A 10A

Outputs Switching 2 3

Outputs Dimming (1-10v) 0 2

Outputs Dimming (DSI) 0 2

Outputs Dimming (Dali) 0 2

Ballasts per channel - 64

Inputs GST18i3 GST18i3

Presence Detectors 8 8

2 Stage Timeout No Yes

Switches 2 2

Key Switch 2 2

Daylight Sensor 8 8

Presence Detection Yes Yes

Absence Detection Yes Yes

Daylight Linking Yes Yes

Constant Daylight No Yes

Switch/Dim No Yes

Integral Corridor Hold Yes Yes

Dusk til Dawn Yes Yes

Integral Emergency Test Yes Yes

Dusk til Dawn Yes Yes

Integral Emergency Test Yes Yes

The DLS1000 Sensor Head is a companion product to the Lighting Controller and is used for movement and daylight sensing in lighting applications.

The DLC100/200 is ‘self configuring’ with easy to set-up parameters via an intelligent configuration interface that reduces costly commissioning time and is easily configured by installing electricians and does not need third party commissioning engineers.


GST 18i3World leading 3 pole soft wiring system for lighting & power applications

Preassembled PVC sheathed cables

Extension Cable Female – Male Connection Cable Female - free end Connection Cable Male – free end

Length 3G2.5 Black Length 3G2.5 Black Length 3G2.5 Black

1 mtr 92.238.1000.1 1 mtr 92.238.1003.1 1 mtr 92.238.1004.1

2 mtr 92.238.2000.1 2 mtr 92.238.2003.1 2 mtr 92.238.2004.1

3 mtr 92.238.3000.1 3 mtr 92.238.3003.1 3 mtr 92.238.3004.1

4 mtr 92.238.4000.1 4 mtr 92.238.4003.1 4 mtr 92.238.4004.1

5 mtr 92.238.5000.1 5 mtr 92.238.5003.1 5 mtr 92.238.5004.1

6 mtr 92.238.6000.1 6 mtr 92.238.6003.1 6 mtr 92.238.6004.1

7 mtr 92.238.7000.1 7 mtr 92.238.7003.1 7 mtr 92.238.7004.1

8 mtr 92.238.8000.1 8 mtr 92.238.8003.1 8 mtr 92.238.8004.1

The backbone of the gesis® connector system is the 2 pole & Earth, GST18i3. Rated at 250V, 20A, they are approved for use as installation couplers to: AS/NZS 61535.

Energy management

GST 18i4World leading 4 pole soft wiring system for lighting applications

Preassembled PVC sheathed cables



1 mtr 92.207.1000.1 1 mtr 92.207.1003.1 1 mtr 92.207.1004.1

2 mtr 92.207.2000.1 2 mtr 92.207.2003.1 2 mtr 92.207.2004.1

3 mtr 92.207.3000.1 3 mtr 92.207.3003.1 3 mtr 92.207.3004.1

4 mtr 92.207.4000.1 4 mtr 92.207.4003.1 4 mtr 92.207.4004.1

5 mtr 92.207.5000.1 5 mtr 92.207.5003.1 5 mtr 92.207.5004.1

6 mtr 92.207.6000.1 6 mtr 92.207.6003.1 6 mtr 92.207.6004.1

7 mtr 92.207.7000.1 7 mtr 92.207.7003.1 7 mtr 92.207.7004.1

8 mtr 92.207.8000.1 8 mtr 92.207.8003.1 8 mtr 92.207.8004.1


GST 18i6World recognised 6 pole soft wiring system for power & intelligent building automation

6 pole GST18 connectors are commonly used to connect luminaires into lighting circuits. Typically the connector is used with Lighting Control Modules where

the 6 pole configuration suits the dimming application (Switched Active, Earth, Neutral, Permanent Active for the emergency circuit, and the dimming pair).

Energy management

Preassembled Halogen-free sheathed cables



1 mtr 99.411.0028.0 1 mtr 99.431.0028.0 1 mtr 99.451.0028.0

2 mtr 99.412.0028.0 2 mtr 99.432.0028.0 2 mtr 99.452.0028.0

3 mtr 99.413.0028.0 3 mtr 99.433.0028.0 3 mtr 99.453.0028.0

4 mtr 99.414.0028.0 4 mtr 99.434.0028.0 4 mtr 99.454.0028.0

5 mtr 99.415.0028.0 5 mtr 99.435.0028.0 5 mtr 99.455.0028.0

6 mtr 99.416.0028.0 6 mtr 99.436.0028.0 6 mtr 99.456.0028.0

7 mtr 99.417.0028.0 7 mtr 99.437.0028.0 7 mtr 99.457.0028.0

8 mtr 99.418.0028.0 8 mtr 99.438.0028.0 8 mtr 99.458.0028.0

DKSH Australia Pty. Ltd., 14-17 Dansu Court, Hallam VIC 3803, Australia. Freecall 1800 010 113, Fax (03) 9554 6677, www.dksh.com.au


Photovoltaic Manufacturing

DKSH Australia’s Performance Materials business unit can supply a wide range of key intermediates and innovative products for the photovoltaic manufacturing industry, including:

Speciality chemicals for the production •of Dye Sensitised Solar Cells, including ruthenium dyes, titania pastes, electrolytes and ionic liquids.PEDOT/PSS based transparent, flexible •and conductive polymers.Charge generation and transportation •materials.Firing pastes.•Ultra weather resistant coatings for •front- and back-sheet films.High-performance cleaners for PV •substrates, thin-films and glasses.

Thick-film cells

Specialised range of materials for the production of mono- and multicrystalline thick film silicon wafer-based cells:

Silver frontside firing paste.•Silver backside firing paste.•Aluminium backside firing paste.•Silver/aluminium mixture firing paste.•

Organic photovoltaic cells

High-tech products and chemicals as hole-injection and electron-acceptor materials for organic photovoltaic cells:

Silver frontside firing paste•Silver backside firing paste•Aluminium backside firing paste•Silver/aluminium mixture firing paste•

Photovoltaic module assembling

High-performance cleaners for photovoltaic substrates, thin-films and glasses:

Ready to use, low foaming cleaners.•Industry specified for efficient in-line •cleaning.Effective debris removal.•Residual free rinsing.•Maximized manufacturing yield.•

Dye-sensitised solar cells

Selected specialty chemicals for the production of dye sensitised solar cells:

Ruthenium dyes.•Iron dyes.•Screen printing and spin coating titania •pastes for active titanium-dioxide layers.Iodide electrolytes and ionic liquids.•Platinum catalyst paint and screen •printing paste.

Front and backsheet films

Ultra weather resistant coating for front and backsheet films or photovoltaic glass:

Acrylic, non-fluorinated polymer with •UV absorbing functional groups.Photocatalytic, super-hydrophilic and •anti-reflective coating solution.

Performance MaterialsMaterials for the manufacturing of Photovoltaics


Biomass energy

Environmental TechnologiesIntegrated process design, engineering and after sales services

DKSH Environmental Technologies leads the way in proven European equipment and solutions for renewable energy usage of solid waste streams. Focusing on high end and robust technologies we offer machines that prepare solid waste streams for alternative energy generation, such as alternative waste treatment plants,

AWT, residue derived fuel plants and composting.

With many years of experience in the engineering field, DKSH can offer equipment solutions as well as integrated process design, engineering and after sales services.

RTT sortingRTT’s UniSort near infra red sorters are an essential step in turning waste streams into reliable fuel sources. Being able to identify nearly all organic compositions, it enables engineering of the calorific value as well as removes undesired materials such as PVC.

Matthiessen bag openingIn order to free materials for sorting, composting or RDF generation, it is necessary to open the plastic bags that the typical household waste and commercial waste is presented to a plant. The Matthiessen bag opener is one of the most reliable machines for this job with up to 50 tonnes per hour throughput.

Size reduction of wood, plastics, paper, and mixed waste Size reduction is the key to turning solid waste streams into fractions that can be utilised for energy generation. DKSH offers a range of machines from HAAS Pre-crushers and hammermills, to Weima single shaft shredders, fast and slow. Both manufacturers have established themselves as leading suppliers in Europe.

HSM balingTo reduce transport costs, the fuel as well as recyclables derived from alternative waste processes are baled in fully automatic channel bale presses. HSM is a leading German machine supplier offering high durability and quality and DKSH can offer reference sites in Australia and New Zealand and fully trained service back up.

Instrumentation, Life Sciences and Laboratory ProductsEquipment and consumables for testing and analysis

DKSH Instrumentation, Life Sciences and Laboratory Products provide the scientific community with a range of high quality consumables, labware and specialised instrumentation products and value-added services. Our Analytical Instrumentation group provides specialised analytical instrumentation for environmental testing, food and beverage, materials science, mining and minerals, petrochemical, plastics and pharmaceuticals.

DKSH Australia Pty. Ltd.14-17 Dansu Court, Hallam VIC 3803, Australiawww.dksh.com/australia

Customer Service: 1800 010 113 Fax: (03) 9554 6677S.A. Customers: (08) 8440 1300 Fax: (08) 8241 5134W.A. Customers: (08) 6254 5900 Fax: (08) 9277 8755

Documents

Solar Solutions