Some Items Are No Longer Available Call 1-800-848 …...2014/10/13 · LOCKSMITH TOOLS 2063 TOOL-N-ONE MADE IN U.S.A. A1-TN1 Cylinder Cap Remover & Plug Follower. For Arrow Locks

LOCKSMITH TOOLS

2060

A1-TB1 The BlockWhen a control-key code must be found for an interchangeable core system. The Block offers an easy-to-use, foolproof answer. Simplydrive the pin stacks into The Block where a pin tray area keeps them separated and in order. The Block works better than shimmingor disassembly in the hand because when it's opened, all pin stacks are easily accessible and yet secure. Constructed of anodizedaircraft alloy. The Block is Compact, rugged and easy to use.

SUT-600 Adjustable Plug HolderThe Adjustable Plug Holder is a universal plug vise. A plug holderthat adjusts its own hole size from .350" to .600" to give a perfectfit on many different cores. Plug vise body and slide are hardenedand have a black oxide finish.

CPH-5Multiple cavity vise type. Fits the five most popular sizes. Holderbodies are hardened and have a black oxide finish.(.404, .504, .508, .512 & .556)

CPH-9Fits the five most popular sizes.(.404, .504, .508, .512 & .556)

CPH-10 .510" holeMade of hardened bar stock, so as not to become scratched bythe file. Black oxide finish. Will accommodate the followingcores: Acrolock, Arrow, Corbin (except oversize and small pins),Eagle (except small pins), Ilco (except peanut cylinder), Keil,Kwikset, Lockwood, National of Rockford (except KNK), Nationalof Ozone Park, Nesco, Russwin (.500" dia.), Sargent, Schlage,Weiser, Yale (except small pins).

PUNCH SHOWN HEREIS NOT INCLUDED

RSF-1 Retainer Staking Fixture for GM Auto LocksThe tumbler retainers on GM Auto Locks must be staked out toprevent their popping out and causing unneeded "lockouts".

This case hardened vise-held fixture grips the core tightly withoutdistortion while staking the four corners of the retainer with a smallchisel-edge punch.

Rigid bottom holds without any giving or "bounce" as may occurwith spring loaded, adjustable holder. Also ideal for holding mostother standard pin tumbler cylinder cores.

Some Items Are No Longer AvailableNew Catalog Coming Soon

Don't See What You Want Call 1-800-848-1577

Don't See What You WantCall 1-800-848-1577

Some Items Are No Longer Available New Catalog Coming Soon

LOCKSMITH TOOLS

2061

CAPPING BLOCK

A1-TB2Our Capping Block has the added advantage of offering two topsallowing you to cap Best, Eagle, KSP, Arrow and even the FalconStyle with the "slide" style spring cover. More than just a CappingBlock, this tool is a complete and versatile workstation. Nomobile shop should be without this time-saver.

DUMPING BLOCK

A1-TB3With A-1's Dumping Block you have the added security ofknowing that your customer's security is maintained. Dump oldcores to assure that no one can determine the control key codeof your system. Also a BIG time-saver when re-keying, this toolwill allow you to dump and hold the contents of dozens of cores.

EJECTOR PUNCHES

A1-TBIPOriginally designed for use with The Block, this punch is suitablefor most any I/C core.

A1-TBMPUse this time-saving, 4-pronged punch to eject cores. Suitablefor manual use and with A-1's Service equipment. Ejects coreswith TWO hits instead of 6 or 7.

TOOL FOR BEST LOCKS

BT1 Capping Tool BT2 Aligning Tool

BT-3 Block





LOCKSMITH TOOLS

2062

FOR NATIONAL ROCKFORD HOLLOW BRASS FOLLOWER SET

ACROLOCK ............................................................. SUT-1ALMONT (Peanut Cylinder) ..................................... SUT-0ARROW ................................................................... SUT-1CORBIN ................................................................... SUT-1CORBIN OVERSIZE ................................................ SUT-10CORBIN (small pins) ............................................... SUT-0DEXTER .................................................................. SUT-1EAGLE ..................................................................... SUT-1EAGLE (Small Pins) ................................................ SUT-0ILCO ......................................................................... SUT-1ILCO (4019 Rim Cylinders) ...................................... SUT-3ILCO (Peanut Cylinders) .......................................... SUT-0KEIL ......................................................................... SUT-1KEIL (No. 30 Rim Cylinders) .................................... SUT-3KWIKSET ................................................................. SUT-1LOCKWOOD ........................................................... SUT-1LOCKWOOD (956 Rim Cylinders) .......................... SUT-3NATIONAL of ROCKFORD (Except KNK) .............. SUT-1NATIONAL of OZONE PARK .................................. SUT-1NESCO .................................................................... SUT-1RUSSWIN (.500" dia.) ............................................. SUT-1RUSSWIN OVERSIZE ............................................. SUT-10SARGENT ................................................................ SUT-1SCHLAGE ................................................................ SUT-1SEAGAL ................................................................... SUT-1TACO ....................................................................... SUT-1TAYLOR ................................................................... SUT-1WEISER (All but Beverly) ........................................ SUT-1WELCH .................................................................... SUT-1WESLOCK (Except KNK) ........................................ SUT-1YALE ........................................................................ SUT-1YALE (Small Pins) ................................................... SUT-0

PLUG FOLLOWER CHARTManufactureFollower

LARGE---.550" dia.

MEDIUM---.495" dia.

SMALL---.395"dia.

SUT-14This set contains three popular sizes of medium-hard, zincplated, hollow brass followers. Each fits into the other and intotheir case for convenient compactness and protection.

This follower kit will also work on the new style Corbin andRusswin heavy duty knob lock cylinder unit. The smalldiameter follower is useful for cabinet locks, peanut sizecylinders and the new type pin tumbler letterbox locks.

Complete set fits into a tube with an orange cap on each end.Handy, compact, efficient and lightweight.

SUT-22 Adjustable FollowerSpring action bar. Fits all standard locks .495" to .600" indiameter. It will handle 90% of all locks. Spring loaded.

SUT-10---.550" dia.These four plug followers will fit 99% of the rim or mortisecylinders and cylinder units currently in use. Made of centerlessground bar stock.

SUT-3---.500" dia.

SUT-1---.495" dia.

SUT-0---.395" dia.

SUT-47Is a set of one each of the above followers.

SUT-24 Follower and Pin PunchFollower machined and zinc plated for smooth operation. Pinpunch is plated and hardened.

Case with caps on each end

ES-MP-120 Universal Follower and Instant Mas-ter Pin Removal ToolThe ES-MP-120 has all the features of a regular following tool---PLUS MORE! This tool assures a fast and efficient methodof removing just the master pins in a cylinder while leaving thetop pins in place. It saves you hours of precious time inrekeying master pinned cylinders. What's more, the ES-MP-120 can also be used as a regular following tool on non-masterkeyed cylinders. It's as if you're getting two tools for the priceof one!





LOCKSMITH TOOLS

2063

TOOL-N-ONEMADE IN U.S.A.

A1-TN1Cylinder Cap Remover & Plug Follower. For Arrow Locks. SideA also works on most Dexter, Falcon, Sargent and WeiserDeadlocks, and some AWI, Schlage, Weslock and importedcylinders. Precision Ground Black Oxide Steel.SIDE A•Removes cylinder caps fromArrow Deadlocks.•Works with cylinder in or outof shell.•Slidesover tailbars.•Holding pin automaticallydepresses when rotating toremove cap.

SIDE 1•Follower for many pintumbler cylinders with .500+-dia. plugs.•Tapered to fit smoothly overback of various cylinderplugs.

IL-898-00-41Plug Holder/Follower Set. Contains four followers (.395, .495,.500, .555), four plug holders (.405, .500, .510, .550), plus 6"tweezers and wooden case. These tools are made from pre-mium steel which has been hardened for lasting wear. Each toolhas a black oxide finish for corrosion and scratch resistance.

FOLLOWERS•LIGHTWEIGHT, DURABLE WHITE DELRYN®.•REFLECTS LIGHT FOR PINNIING.

LB-LFT000 Schlage(for 3 types of cylinders)

LB-LFT002 Weslock(.515 Dia.)

LB-LFT003 Corbin(.550 Dia.)

LB-LFT004 Small Plug(.398 Dia.)

LB-LFT001 Universal(.498 Dia.)

FOLLOWER SET

LB-LFT005•Includes: Universal, Weslock, Corbin,small plug•These followers will do 90% of allcylinders.

LB-LCL001 CYLINDER SHELL LOADER - The easyway to load cylinder shells. Can be used in 75% of all .156spacing. Includes complete "How To" instructions

LOADING PLUG(White Delryn®)

LOADER SLIDE

STEEL TRANSFER KNIFE

KD-K-19 PROFILE CYLINDER FOLLOWER - A simplebut effective solution to the frustration of servicing profile cylin-ders. Special magnetic design for easy operation.

KD-K-6 THE MASTER FOLLOWER - This remarkablefollower is a wise choice for either the newcomer or masterlocksmith. Made of SOLID BRASS, it will outlast those made ofplastic or aluminum. The capabilities of this machined followerfar exceed any follower on the market today. It can be used asa regular follower or master pin remover and follower on Schlage,Sargent, Kwikset, Weiser, Almont Padlocks and many others.Special taper allows smooth operation and better control oversticking pins. .495 diameter x 4-1/2" long.





LOCKSMITH TOOLS

2064

POKE/FOLLOWER

Shaft for poking/probing.

Rubber O-ringgroove for removalof wafers

Slot for mortisecylinder plugs

ApproximateSize Pictured.

SCT-2The Major Poke/Follower is a combination .495" diameter follower with a stop. The follower has a .120" grove cut into the body toaccommodate the removal of most wafers without having to completely empty each of the pin chambers. The rear of the follower hasa .250" machined slot in order to accept a variety of mortise cylinder plugs. A rubber O-ring provides a positive stop to insure againstthe housing sliding off of the follower. At the other end, there is a 2" shaft with a hardened .050" tip designed to poke or probe. (Idealfor depressing retainer when removing Schlage knobs, etc.)

CYLINDER REMOVING TOOL

A1-TN1 See previous page for description.

TOOL-N-ONEMADE IN U.S.A.

KW-1467

KWIKSET CYLINDER REMOVAL TOOL

CYLINDER CAP REMOVER

LB-LCR 001For use with Schlage, Weiser & Arrow cylinders. Depressescylinder cap pin to remove cap in one easy turn.

WE-1029 3-Way Cylinder Cap Tool

A1-26Frequently its almost impossible to pick a lock in the rightdirection, but easy to pick it backwards. Solve the problem withA-1's original Plug Spinner. When the lock is picked in the wrongdirection, simply wind the spinner (left or right), set the trigger,insert the blade into the plug, release the trigger and the lock willbe picked in the correct direction.

FLIP-ITTM

FIT-2When picking a lock in the wrong direction (intentionally or byerror) the Flip-ItTM will flip the cylinder plug past the upper pinsand save the job of repicking. The Flip-ItTM comes with 2exclusive features. The two pin Quick Lock/Release featureallows for easy release of the rotating action. The sure stopfeature prevents over winding in either direction.

PLUG SPINNER

ES-KCRT-1Here is a exciting tool designed to work every time to removecylinders from Kwikset "400" series knobsets. Made of strongtool-steel. Easy to follow, illustrated instructions included witheach tool.





LOCKSMITH TOOLS

2065

CLIP TOOL

SET OF TWO

CR-2The HPC Clip Tool (CR-2) has been designed to remove Ctype snap rings quickly, easily and safely. The Clip Tool willremove snap rings found on: Schlage F Line Knob Locks,Kwikset Knob Locks and Deadbolts, Arrow Knob Locks, YaleKnob Locks, Lori Rim Cylinders and more.

CURVED SHIM

SCS-25 Package of 25SCS-100 Package of 100

THE GRABBER

A1-TG1If you're tired of dropping pins and springs from conventionaltweezers, order A-1's Grabber. Pins and springs snap into thisdouble ended tool. While they are held firmly, they releasealmost at will. MADE OF SOLID BRASS.

A1-DP1This is a handy tool for manipula-tion in tight areas. A valuable addi-tion to any pro's toolbox, it's justright for so many jobs. Set includestwo pins and a carrying case.

THE DOWNIE PIN

MULTI-TOOL

WAFFLE TRAY

A1-WT1Keep springs, pins and plugs neatly separated and innumbered pockets with this popular tool. Manufactured fromcoated metal, the Waffle Tray is compact and stackable.

COMPACT PIN TUMBLER TWEEZERS

PIN BLOCK

LB-LPB 001The Pin Block is made of Maplewood and can holds 5 plugs.Use with your fingers or tweezers. Actual size: 5" x 4-1/2".

PTT-5Another, but shorter version of a pintumbler tweezers. Only 4 inches long.Milled tips firmly grip top and bottom pins.A compact, pocket-sized keying aid.

ES-CJ-34 Multi-ToolHere's a truly unique tool with hundreds of different uses! TheES-CJ-34 is just what the doctor ordered for pulling smallsprings, especially on mortise locks or knob tension springs onSchlage L locks or on any lock where there's no room to use yourfingers or pliers. What's more, It's great to take tru-arc rings offof cylinders and it's a tremendous aid in taking the caps off key-in-knob cylinders and rim cylinders such as those made by Lori,Arrow, AWI, Dexter, Sargent and Schlage, to mention a few.Other uses include depressing the pin to remove Corbin andRusswin knobs and taking the wedge out of Schlage A80cylinder Locks.Those are just some of the uses, but as you work with the Multi-Tool, you'll discover uses we never even thought about! Devel-oped by a professional locksmith, it's the handiest tool to comedown the road in years!





LOCKSMITH TOOLS

2066

PIN TUMBLER TWEEZERS

PTT-4The groove in the tip provides a firm, non-twisting grip on cylinderpins for easy loading. The tip is also milled back so that theoutside diameter of a standard .115" diameter pin extends pastthe tip. This permits "butting" the pin against the end of the plugfollower when loading the upper chambers, providing addedcontrol when holding top or master pins of varying lengths.

LB-LZT 001Perfect size and weight. Stainless steel with a formed end.

FORMED ENDTWEEZERS

IL-900-00-51Short pin tumbler tweezers, 4" in length, pin holder tip.

PIN TUMBLER TWEEZERS

IL-899-00-51Pin tumbler tweezers, 6" in length, pin holder tip.

TPT-5This improved pin tumbler tweezers has a pin pushing attach-ment that makes it easier to load top pins into a cylinder. Whiletop pin is held in place, use forefinger to push attachment downto set pin into chamber. Pin loading wire is removable, makingthis also ideal for loading bottom pins.

STEEL LETTERS AND FIGURES

LETTERSSLS-3/32 3/32"SLS-1/8 1/8"

FIGURESSFS-3/32 3/32"SFS-1/8 1/8"

Sets of letters consist of 27 characters. Sets of figures consistof 9 characters.

SPECIAL LOCKSMITH STAMPS

LMSMASTER

LDNDDO NOT DUPLICATE

LDNCDO NOT COPY

Permanently mark a Master or Restricted key with HPC's speciallocksmith stamps. Let other locksmiths and key duplicatorsknow it is a special purpose key and is part of a restricted system.The stamps are made of heavy duty steel stock, 3/8' X 5/8",hardened and flash-chromed for years of trouble free service.

IGNITION DRILL TEMPLATE FOR FORD

ITF-14This template allows swift, precise removal of the side-bar sothat replacement can be done almost immediately. Accuracy isensured by the use of a key blank as a guide.





LOCKSMITH TOOLS

2067

Lock-outs of tubular key locks can be serviced. These holesaws destroy the pins at the shear line. Hole saws areavailable for standard and oversize keyways. Saws will fit any1/4" electric drill. Saw life is approximately three openings.Not for locks with hardened pins or ball bearings in the keyway.

G-1Replacement saw for AG-1

G-2Replacement saw for AG-2

AG-2Oversize tool + extra saw

AG-1Standard size tool + extrasaw

CYLINDER DRILL JIGSTUBULAR LOCK DRILLS

HOLLOW DRILLSFIT INTO HOLDER

HOLDER

CDJ-2

CDJ-1

A1-14 Tubular Lock SawThis rotary saw cuts away the shoulder over pins to allow themto be removed and lock opened. Since the pins remain intact,they can be measured to decode the lock in a situation such asa laundromat, where numerous locks are keyed alike. It will alsoopen locks with ball bearings in the keyway, but should not beused on locks with dead pins. This saw will cut brass or steel#137 standard locks at low speed. Not recommended orguaranteed for over 1000rpm. After tested on over 50 locks, thissaw was still sharp.

MODULAR DRILL JIG SETWITH SAFETY HANDLE

CDJ-3You will be able to drill the cylinder in just the right location toenable you to either drill out the shear-line or drill out the retainingpin to remove and save the entire core (which can then bedisassembled to determine the bitting of the control key).

REMOVABLE CORE DRILL JIG

A1-DJ1A-1 offers an innovative, safer way to drill out cylinderswithout the high risk of injury to fingers and hands. Each jigsnaps into the cone shaped safety handle to provide properalignment for many popular cylinders. Set includes: A-1 safetyhandle, 3 steel jigs, 3 bits; I/C for interchangeable coremortise cylinder and tulip knob. Pins remain intact fordecoding. RT for recessed tulip design. Does not damageknob. FF for flat faced cylinders.

CDJ-1Cylinder drill jig and drill bit for a flat face cylinder.

CDJ-2Cylinder drill jig and drill bit for recessed Tulip design types.

Occasionally, it is found that a mortise or rim cylinder isimpossible to pick. Even the best lock picker may be foiled bya broken cylinder spring, corroded pins, ect. Drilling is theanswer.The CDJ-1 and CDJ-2 drill jigs are designed for such situa-tions. These jigs will assure perfect alignment on the shearline for a drill bit.





LOCKSMITH TOOLS

2068

MORTISE CYLINDERLOCK TAP & DIE SET

HDPS-4PUNCHES A DOUBLE "D" HOLE. A necessary aid to thelocksmith for installing vending machine and cam type locks onmetal cabinets, sheet metal lockers, filing cabinets and cashboxes made of single wall, sheet metal of 18 gauge or lighter.

METAL PUNCH AND DIE SETS

CLD-6Cylinder Re-threading Die and Holding Fixture.

CLT-4Lock Case Re-tapping Tap.

CLTD-5Complete Tap & Die Kit with Cylinder Holding Fixture & MetalBox.

Bothered by stripped mortise cylinders and lock cases? Howmany times has a customer come into your shop with a strippedmortise cylinder, because he unscrewed it without loosening theretaining screw or fork? This kit offers the perfect solution to thisproblem as well as the more important task of rethreadingcylinders and cases that are no longer manufactured and mustbe repaired.

.645

.770

DOUBLE "D"

A1-17REMOVES STUBBORN MORTISE CYLINDERS NON-MARRING. Grips standard mortise cylinders without marring thefinish.

CYLINDER REMOVAL CLAMP

MORTISE CYLINDER REMOVAL TOOL

A1-16REMOVES STUBBORN MORTISE CYLINDERS. This heavyduty cam action tool will allow you to remove even the moststubborn mortise cylinders. Automatically adjust from 15/16" to1-1/2".

A1-QP•Snaps cylinders out from the front of popular key-in-knob locksets in seconds • Why push when you can pull •No more disassembly of knobset • No more need toremove interior knob •Developed by a locksmith for locksmiths, this innovative toolremoves the cylinders from Kwikset "400" series and Dexter"3200" series knobs. Virtually no damage to Kwikset "400"series. Dexter "3200" series will require replacement ofretainer clips.

QUICKPULLMADE IN U.S.A.

Cylinder Removal Tool for Kwikset and Dexter





LOCKSMITH TOOLS

2069

FLEX-A-LIGHTTM

A New Concept in Probe Lights

More flexible than bending lights, yet rigidenough to keep straight.

FAL-1010" LightPower Handle

FAL-25XKit10" Light15" LightPower Handle36" Extension

FAL-15XKit15" LightPower Handle36" Extension

• Halogen Light• No Switches to Fail• Very Compact for Carrying

FAL-R10Replacement 10" light extension (Special Order Only)

FAL-R15Replacement 15" light extension (Special Order Only)

FPL-15 15" Flexible ShaftThis light is an economical, high intensity diagnostic tooldesigned for the locksmith professional. The shaft may bebent so that any angle will easily enter a 1/4" hole.

FLEXIBLE PROBE-LIGHT

KD-K-23Transforms your mini flashlight into a power-ful inspection device. Works with the Mini-Mag Lite®, Brinkman®, and many other"AA" flashlights. The KD-K-23 consists of a1" diameter polypropolene cap and two in-ter-changeable fiber optic rods.

SCOPE FOR MINI-FLASHLIGHTS

MGS-1An economically priced Otoscope ideal for magnifying andilluminating hard to see areas. This compact functional instru-ment reflects the same level of craftsmanship and precision asthe most expensive medical instruments on today's market.Packaged complete with three specula, pin probe assembly andsoft plastic carrying pouch. Uses convenient "C" batteries.

MAGNA SCOPE





LOCKSMITH TOOLS

2070

A1-04DECODES KEYS FROM 3 SYSTEMS. A decoding gauge forA2, A3, A4.

ACE KEY DECODER

A1-52Decodes "Ace" keys quickly, easily and accurately.

GENERAL MOTORS LOCK DECODER

A1-6This quality tool makes everyone a professional. Decode allyears of General Motor sidebar without complete disassembly.

STRAIGHT YOKEMICROMETER

I/C CORE KEY GAUGE

KM-60The KM-60 has a forged-steel frame, with a satin chrome finish.Tool steel anvil, slide & screw. Clear precise graduations.Tapered anvil, reaches down into narrow pin seats.

MANUAL MICROMETER

SKM-2DAn easy to see digital feature gives instant readings of depths ofcuts, without eye strain. Friction thimble keeps user from over-tightening. The SKM-2D is satin chrome plated and has heavyduty construction for years of service. It includes a leather case.

ULTIMATE MICROMETER

SKM-1This straight yoke key micrometer has ratchet thimble to assureproper tightening for an accurate reading. It has a satin chromebody and yoke, and also includes a leather case.

POCKET SIZED DECODER

HKD-75This handy, pocket sized decoder kit determines the original factory depths of most popular domesticpin and disc tumbler cylinders and automotive keys. It is ideally suited for giving the correct bottom pinsize when re-keying new or worn cylinders. It is also an effective time saver when used along with thepopular, precision color pin assortment or when using original pins. Simply insert the correct informationcard into the top slot of the decoder. Lowering the depth pin into each cut, from bow to tip, will indicatethe correct depth in the window at the top. Each of the 63 2" x 4" information cards also list the correctfactory depths and space specifications and shows the internal moving parts. Each decoder andinformation card set includes a black case.





LOCKSMITH TOOLS

2071

GM TUMBLER DECODER GAUGES

GMTD-5This inexpensive set of gauges eliminates the guess work whenreading the GM tumblers. No need to take apart the lock or wastekey blanks by "eye-balling" the depths.Simply press inward on the side bar and rake the tumblers untilthe side bar moves inward to the unlocked position. Then placegauge pin over each wafer until the shoulder stop butts againstthe top of the plug.

TUBULAR KEY AND PICK DECODER

TKPD-1Stainless steel device for decoding tubular keys and picks.Covers 8 depths. For standard, small, large, left hand, right hand,UL (pin-within-a-pin) tubular keys.

MICRO-DIAL CALIPER

IL-884-00-41Stainless Hardened, shock-proof micro-dial caliper.

KEY MICROMETER

IL-881-00-11Micrometer has a hardened and chomed anvil to reach thedeepest and narrowest cuts accurately.

KEY MICROMETER BASE

IL-883-00-11Metal micrometer mount base for IL-881-00-11 key micrometer.

3-N-1 GAUGE

LB-LKG 001KWIKSET • SCHLAGE • WEISER gauge Features: small insize; accurate; brass finish; easily carried in pocket or keying kit.

KEY GAUGE

SC-40-104Key gauge for all Schlage pin tumber keys.





LOCKSMITH TOOLS

2072

REPLACEABLE TIP SNAP RINGPLIER SET

444KThree basic tip diameters will handle a wide variety of rings, bothexternal and internal for shafts 3/8" to 1-1/4". Tip selection ismade on the basis of the "P" hole diameter in the lug of the ring.For most rings, the "P" diameter will range from .035" to .078",and tips are provided for the entire range. Sizes may overlap,and some rings handled by .045" dia. tips may be applied orremoved by .035" dia. tips.

CONTENTS:1. Internal Plier (445-A) with 4 prs. assorted tips.

2. External Plier (446-A) with 4 prs. assorted tips.

3. Entire kit contained in plastic box.

4. Separate small plastic box within kit for tips:444-37 Two pairs 90o angle, .035 dia. tips444-45 Two pairs straight .045 dia tips444-46 Two pairs 45o angle, .045 dia tips444-60 Two pairs straight .060 dia. tips

TRUARC RING PLIERS

TRU-99For internal and external rings. Has replaceable tips and adjust-able stop.

SNAP RING PLIERS

TRU-123 Ring Compressor Offset

TRU-122 Ring Spreader

TRU-121 Ring Compressor

Position forRing Compres-

sion

Position forRing Spreading

TWO TOOLS IN ONE

TRU-55 Combination Ring Spreading and Compression ToolTwo pivot centers--dual operation. No. 1 center is for compress-ing and No. 2 is for spreading action. Changeovers are madequickly and easily.

KIP-1Use this tool as you would other self-gripping pliers. Even a verytight grip will only slightly affect the appearance of the key. Thejaws are smooth to the touch, though they are parallel at the mostcommon thickness of the key. This allows great holding strengtheven though there are no teeth on the jaws.

KEY IMPRESSIONING PLIERS





LOCKSMITH TOOLS

2073

ROUTER-DRILL SAWS, DRILLS, ROUTS, FILES4-in-ONE

SD-412 slotted type bits, 2 Phillips type bits.

RD-1Fits any electric drill, drill press. Cuts own starting hole in any shape or direction toolis moved. Sharp milled flutes for fast cutting action...will not clog! Ideal for enlargingholes, making scrolls. Cuts wood, plastic, non-ferrous metals. Made of hardened,tough steel for long life.

PADLOCK BUSTER

PB-20The Padlock buster is designed to open most small and medium size padlocks withshackle diameters up to 5/16". It opens padlocks with toe and heel steel locking balls,up to 1/4" diameter shackle only.Method 1 (Normal Padlock)—Adjust the handle angles as shown here, byrelocating the thumb screws.Method 2 (Larger Padlocks)—For larger locks, use the opposite side of thecams.Method 3--If the lock is not accessible by methods 1 or 2, reverse one of thecams to make a left and right hand device and use as illustrated.

REPLACEMENT PART AVAILABLE (SPECIAL ORDER)

Place a piece of woodunder lock to protectwall.

PICTUREDSMALLER

THANACTUAL

SIZE





LOCKSMITH TOOLS

2074

LOCKS BOX

LB-1HPC's Locks Box (LB-1) is a handy tool box with a detachablecover. With the LB-1 there is no need to bend down each time youneed a tool and there is little clean up when the job is complete.It is made with all steel construction and a super hard bakedenamel finish.

LEVER OPENING TOOL

KD-K-22If you can slide this tool under thedoor, you will open it. This tool isto be sold to locksmiths and lawenforcement agencies. This toolis not to be used unlawfully. Nei-ther us nor Keedex will be re-sponsible for the misuse of thistool.

KEY BLANK INVENTORYCONTROL TAG

INV-1 (Sold by the box, 100 tags per box)This tags offer a quick visual method of controlling key blankinventory. Simply mount these bright yellow tags directly on thehook in front of your determined "order point".





LOCKSMITH TOOLS

2075

ES-SK-70Developed specifically for locksmiths, this spring assortment will prove invaluablewhen repairing various panic devices, mortise locks, or other products wherereplacement springs are required. Consisting of the most commonly usedsprings, each assortment contains 10 each of 12 different size springs in a handyspill proof container. Contents subject to change without notice.

BRASS SPRING ASSORTMENT

FRS-4This spring steel assortment contains different sizes of the most popular flat and round blue steel. The assortment is cut intoconvenient 9" lengths and is packaged in a see-through round plastic container.

FLAT, ROUND SPRING STEEL ASSORTMENT

ES-FSA-50Here is a flat spring steel assortment featuring the most popular sizes of spring steel used in making springs for various mortise locksand other security products. Packed in a durable, see-through plastic tube, the FSA-50 includes the most popular sizes of spring steel.There is no waste with sizes you rarely use. What's more, each piece of spring steel is cut in 6 inch lengths for easy handling andstorage.

FLAT SPRING STEEL ASSORTMENT

ES-SWA-100The ES-SWA-100 is a Spring Wire Assortment whichfeatures the most popular sizes of round spring wireused in making springs for various mortise locks andother security products. The ES-SWA-100 is packedin a durable plastic see-through tube for easy han-dling and storage, and includes 15 pieces each of the7 most popular thicknesses of spring wire What'smore, all pieces are 12 inches in length, the lengthmost requested by locksmiths. A convenient pack-age, the ES-SWA-100 puts various sizes of springwire immediately at your fingertips in an easy-to-handle tube.

SPRING WIRE ASSORTMENT





Documents

Some Items Are No Longer Available Call 1-800-848 …...2014/10/13 · LOCKSMITH TOOLS 2063 TOOL-N-ONE MADE IN U.S.A. A1-TN1 Cylinder Cap Remover & Plug Follower. For Arrow Locks