SPEC of Pipes for Shipbuilding

7/27/2019 SPEC of Pipes for Shipbuilding

1/13

Shipbuilding

JIS F 0014:2000Glossary of terms for shipbuilding (hull part -piping)

JIS F 0301:1990Schemes of thermal insulation of piping for small ships

JIS F 0414:1996Shipbuilding - internal wirings and pipings of engine control console

JIS F 0506:1996Shipbuilding - applications of copper pipes

JIS F 0507:1992Small ships - steel pipes - application

JIS F 2007:1976Mooring pipes

JIS F 2030:1978Single point mooring pipes

JIS F 3016:1996Shipbuilding - cast iron pipe sleeve type expansion joints

JIS F 3017:1996Shipbuilding - cast steel pipe sleeve type expansion joints

JIS F 3993:1996Discharge pipes for dredger

JIS F 3994:1996Floaters of discharge pipes for dredger

JIS F 3995:1991Rubber sleeves for dredge discharge pipes

JIS F 7008:1996Standard specification of thermal insulation for piping

JIS F 7101:1993Pipes of ship's machinery - standard velocity of flow

JIS F 7102:1989Application for gaskets and packings to piping system in machineryspace

JIS F 7435:1996Shipbuilding - brass 30K unions with bite joints

JIS F 7436:1996Shipbuilding - copper tube 10K brazed unions

JIS F 7437:1996Shipbuilding - copper tube 10K screwed unions

JIS F 7438:1996Shipbuilding - steel pipe 10K welding type unions

JIS F 7439:1996

Shipbuilding - steel pipe 10K screwed unions JIS F 7440:1996

Shipbuilding - copper pipe 20K brazed type unions JIS F 7441:1996

Shipbuilding - copper pipe 20K screwed unions JIS F 7442:1996

Shipbuilding - steel pipe 40K welded unions JIS F 7443:1996

Shipbuilding - steel pipe 40K screwed unions


2/13

JIS F 7444:1996Shipbuilding - steel pipe 100K welded unions

JIS F 7445:1996Shipbuilding - steel pipe 100K screwed unions

ASTM STANDARD

Steel--Piping, Tubing, Fittings

A0053_A0053M-04A Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A0105_A0105M-03 Specification for Carbon Steel Forgings for Piping Applications

A0106_A0106M-04B Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A0134-96R01 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

A0135-01 Specification for Electric-Resistance-Welded Steel Pipe

A0139_A0139M-04 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

A0178_A0178M-02 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler

and Superheater Tubes

A0179_A0179M-90AR01 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger andCondenser Tubes

A0181_A0181M-01 Specification for Carbon Steel Forgings, for General-Purpose Piping

A0182_A0182M-04A Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings,

and Valves and Parts for High-Temperature Service

A0192_A0192M-02 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A0193_A0193M-04B Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature

Service

A0194_A0194M-04A Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High

Temperature Service, or Both

A0209_A0209M-03 Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A0210_A0210M-02 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

A0213_A0213M-04B Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-

Exchanger TubesA0214_A0214M-96R01 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser

Tubes

A0234_A0234M-04 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and

High Temperature Service

A0249_A0249M-04A Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and

Condenser Tubes

A0250_A0250M-04 Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

A0252-98R02 Specification for Welded and Seamless Steel Pipe Piles

A0254-97R02 Specification for Copper-Brazed Steel Tubing

A0268_A0268M-04A Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for

General Service

A0269-04 Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

A0270-03A Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary

Tubing

A0312_A0312M-04B Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel

Pipes

A0320_A0320M-04 Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature

Service

A0333_A0333M-04A Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

A0334_A0334M-04A Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature

Service

A0335_A0335M-03 Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service


3/13

A0350_A0350M-04A Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing

for Piping Components

A0358_A0358M-04 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for

High-Temperature Service and General Applications

A0369_A0369M-02 Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature

Service

A0370-03A Test Methods and Definitions for Mechanical Testing of Steel Products

A0376_A0376M-04 Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

A0381-96R01 Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

A0403_A0403M-04 Specification for Wrought Austenitic Stainless Steel Piping Fittings

A0409_A0409M-01 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-

Temperature Service

A0420_A0420M-04 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-

Temperature Service

A0423_A0423M-95R04 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

A0426_A0426M-02 Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

A0437_A0437M-04 Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-

Temperature Service

A0450_A0450M-04A Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel

Tubes

A0451_A0451M-02 Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature ServiceA0453_A0453M-04 Specification for High-Temperature Bolting Materials, with Expansion Coefficients

Comparable to Austenitic Stainless Steels

A0498-04 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

A0500-03A Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and

Shapes

A0501-01 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A0511-04 Specification for Seamless Stainless Steel Mechanical Tubing

A0512-96R01 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

A0513-00 Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

A0519-03 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

A0522_A0522M-01 Specification for Forged or Rolled 8 and 9\% Nickel Alloy Steel Flanges, Fittings, Valves, and

Parts for Low-Temperature Service

A0523-96R01 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-PressurePipe-Type Cable Circuits

A0524-96R01 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

A0530_A0530M-04A Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

A0539 Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines

A0540_A0540M-04 Specification for Alloy-Steel Bolting Materials for Special Applications

A0554-03 Specification for Welded Stainless Steel Mechanical Tubing

A0556_A0556M-96R01 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

A0587-96R01 Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

A0589-96R01 Specification for Seamless and Welded Carbon Steel Water-Well Pipe

A0595-04A Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

A0608_A0608M-02 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure

Application at High Temperatures

A0618_A0618M-04 Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy StructuralTubing

A0632-04 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General

Service

A0660-96R01 Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

A0671-04 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A0672-96R01 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate

Temperatures

A0688_A0688M-04 Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes


4/13

A0691-98R02 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at

High Temperatures

A0694_A0694M-03 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts

for High-Pressure Transmission Service

A0707_A0707M-02 Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

A0714-99R03 Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe

A0727_A0727M-02 Specification for Carbon Steel Forgings for Piping Components with Inherent Notch

Toughness

A0733-03 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

A0751-01 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A0758_A0758M-00 Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch

Toughness

A0771_A0771M Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-

Cooled Reactor Core Components

A0774_A0774M-02 Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive

Service at Low and Moderate Temperatures

A0778-01 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A0787-01 Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

A0789_A0789M-04A Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General

Service

A0790_A0790M-04A Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel PipeA0795_A0795M-04 Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel

Pipe for Fire Protection Use

A0803_A0803M-03 Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

A0813_A0813M-01 Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

A0814_A0814M-03 Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

A0815_A0815M-04 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping

Fittings

A0822_A0822M-04 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

A0826_A0826M Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-

Cooled Reactor Core Components

A0836_A0836M-02 Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and

Pressure Vessel Service

A0847-99AR03 Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubingwith Improved Atmospheric Corrosion Resistance

A0851 Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

A0858_A0858M-00 Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive

Service

A0860_A0860M-00 Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

A0865-03 Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for

Use in Steel Pipe Joints

A0872_A0872M-04 Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive

Environments

A0908-03 Specification for Stainless Steel Needle Tubing

A0928_A0928M-04 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with

Addition of Filler Metal

A0941-04A Terminology Relating to Steel, Stainless Steel, Related Alloys, and FerroalloysA0943_A0943M-01 Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A0949_A0949M-01 Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

A0953-02 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

A0954-02 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

A0960_A0960M-04A Specification for Common Requirements for Wrought Steel Piping Fittings

A0961_A0961M-04A Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts

for Piping Applications

A0962_A0962M-04 Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both,

Intended for Use at Any Temperature from Cryogenic to the Creep Range


5/13

A0972_A0972M-00R04 Specification for Fusion Bonded Epoxy-Coated Pipe Piles

A0984_A0984M-03 Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded

A0988_A0988M-98R02E01 Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and

Parts for High Temperature Service

A0989_A0989M-98R02E01 Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and

Parts for High Temperature Service

A0994-03 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related

Alloys

A0999_A0999M-04A Specification for General Requirements for Alloy and Stainless Steel Pipe

A1005_A1005M-00R04 Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double

Submerged-Arc Welded

A1006_A1006M-00R04 Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

A1012-02 Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat

Exchanger Tubes With Integral Fins

A1014-03 Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service

A1015-01 Guide for Videoborescoping of Tubular Products for Sanitary Applications

A1016_A1016M-04A Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and

Stainless Steel Tubes

A1020_A1020M-02 Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler,

Superheater, Heat Exchanger and Condenser Applications

A1024_A1024M-02 Specification for Steel Line Pipe, Black, Plain-End, SeamlessE0527-83R03 Practice for Numbering Metals and Alloys (UNS)

ISO - Pipe, Tube and Fittings Standards and Specifications

International Organization for Standardization - ISO - pipe, tube and fittings standards and specifications

Industrial pipe, tube and fittings standards and specifications from the ISO - International Organization for

Standardization:

ISO 7-1:1994-05Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and

designation

ISO 7-2:2000Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit

gauges

ISO 49:1994Malleable cast iron fittings threaded to ISO 7-1

ISO 228-1:2000Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and

designation

ISO 228-2:1987

Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limitgauges

ISO 264:1976Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure; Laying lengths;

Metric series

ISO 265-1:1988Pipes and fittings of plastics materials; fittings for domestic and industrial waste pipes; basic dimensions:

metric series; part 1: unplasticized poly(vinyl chloride) (PVC-U)


6/13

ISO 392:1986Asbestos-cement pipe fittings for building and sanitary purposes

ISO 580:1990Injection-molded unplasticized poly(vinyl chloride) (PVC-U) fittings; oven test; test method and basic

specifications

ISO 727-1:2002

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C)or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series

ISO 727-2:2002Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C)

or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based

series

ISO 881:1980Asbestos-cement pipes, joints, fittings/sewage/drain

ISO 1179:1981Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications

ISO 1635-2:1987Seamless wrought copper and copper alloy tube

ISO 1651:1974

Tube drawing mandrels ISO 1684:1975

Wire, bar and tube drawing dies; Specifications

ISO 2016:1981Capillary solder fittings for copper tubes; Assembly dimensions and tests

ISO 2035:1974Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under

pressure; Pressure-resistance test

ISO 2044:1974Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with

pressure pipe; Hydraulic internal pressure test

ISO 2048:1990Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing

ring type joints; minimum depths of engagement ISO 2284:1987

Hand taps for parallel and taper pipe threads; General dimensions and marking

ISO 2507-1:1995Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method

ISO 2507-2:1995Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized

poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high

impact resistance poly(vinyl chloride) (PVC-HI) pipes

ISO 2507-3:1995Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for

acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

ISO 2531:1998

Ductile iron pipes, fittings, accessories and their joints for water or gas applications ISO 2804:1996

Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions

ISO 2851:1993Stainless steel bends and tees for the food industry

ISO 2852:1993Stainless steel clamp pipe couplings for the food industry


7/13

ISO 3183-1:1996Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 1:

Pipes of requirement class A

ISO 3183-2:1996Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2:

Pipes of requirements class B

ISO 3253:1998Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

ISO/TR 3313:1998Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-

measurement instruments

ISO 3419:1981Non-alloy and alloy steel butt-welding fittings

ISO 3458:1976Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under

internal pressure

ISO 3459:1976Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test

method and requirement

ISO 3477:1981Polypropylene (PP) pipes and fittings - density

ISO 3501:1976Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out

ISO 3503:1976Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under

internal pressure when subjected to bending

ISO 3514:1976Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of density

ISO 3545-1:1989Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular

cross-section

ISO 3545-2:1989

Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections ISO 3545-3:1989

Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section

ISO 3586:1976Glass plant, pipeline and fittings; general rules for testing, handling and use

ISO 3587:1976Glass plant, pipeline and fittings; Pipeline and fittings of nominal bore 15 to 150 mm; Compatibility and

interchangeability

ISO 3603:1977Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints;

Pressure test for leakproofness

ISO 3604:1976Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints;

Pressure test for leakproofness under conditions of external hydraulic pressure ISO 3633:2002

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -

Unplasticized poly(vinyl chloride) (PVC-U)

ISO 4056:1978Polyethylene (PE) pipes and fittings- designation

ISO 4059:1978Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test and

requirements


8/13

ISO 4132:1979Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths

and size of threads; Metric series

ISO 4144:2003Pipework - Stainless steel fittings threaded in accordance with ISO 7-1

ISO 4145:1986

Non-alloy steel fittings threaded to ISO 7/1 ISO 4230:1987

Hand- and machine-operated circular screwing dies for taper pipe threads; R series

ISO 4231:1987Hand- and machine-operated circular screwing dies for parallel pipe threads - G series

ISO 4397:1993Fluid power systems and components; connectors and associated components; nominal outside diameters

of tubes and nominal inside diameters of hoses

ISO 4439:1979Unplasticized polyvinyl chloride (PVC) pipes and fittings; Determination and specification of density

ISO 4422-1:1996Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -

Part 1: General

ISO 4422-2:1996Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply - Specifications -Part 2: Pipes (with or without integral sockets)


Part 3: Fittings and joints


Part 5: Fitness for purpose of the system

ISO 4435:2003Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl

chloride) (PVC-U)

ISO 4440-1:1994

Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test method ISO 4440-2:1994

Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test conditions

ISO 4451:1980Polyethylene (PE) pipes and fittings - determinati

ISO 4483:1979Asbestos-cement pipelines; Field pressure testing

ISO 4486:1985Asbestos-cement ventilation ducts and fittings; Dimensions and characteristics

ISO 4488:1979Asbestos-cement pipes and joints for thrust-boring and pipe jacking

ISO 4704:1977Glass plant, pipeline and fittings; Glass plant components

ISO/TR 5168:1998Measurement of fluid flow - Evaluation of uncertainties

ISO 5251:1981Stainless steel butt-welding fittings

ISO 5256:1985Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal

tar derived materials

ISO 5361:1999Anaesthetic and respiratory equipment - Tracheal tubes and connectors


9/13

ISO 5730:1992Stationary shell boilers of welded construction (other than water-tube boilers)

ISO 5969:1979Ground thread taps for pipe threads G series and Rp series; Tolerances on the threaded portion

ISO 6207:1992Seamless nickel and nickel alloy tube

ISO 6447:1983Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material

ISO 6448:1985Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material

ISO 6455:1983Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under

pressure; Dimensions of laying lengths; Metric series

ISO 6594:1983Cast iron drainage pipes and fittings; Spigot series

ISO 6605:2002Hydraulic fluid power - Hoses and hose assemblies - Test methods

ISO 6761:1981Steel tubes; Preparation of ends of tubes and fittings for welding

ISO 6964:1986Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test

method and basic specification

ISO/TR 7074:1986Performance requirements for plastics pipes and fittings for use in underground drainage and sewage

ISO 7228:1993Tracheal tube connectors

ISO 7245:1984Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and

extrusion materials

ISO 7246:1984Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and

extrusion materials

ISO 7268:1983Pipe components; Definition of nominal pressure

ISO 7278-2:1988Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters;

part 2: pipe provers

ISO 7279:1984Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series;

Dimensions of sockets

ISO 7370:1982Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified

diameters and standard lengths

ISO 7387-1:1983Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test

methods ISO 7608:1985

Shipbuilding; Inland navigation; Couplings for disposal of oily mixture and sewage water

ISO 7671:2003Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -

Polypropylene (PP)

ISO 7675:2003Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings -

Chlorinated poly(vinyl chloride) (PVC-C)


10/13

ISO 7682:2003Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -

Acrylonitrile-butadiene-styrene (ABS)

ISO 7686:1992Plastics pipes and fittings; opacity; test method

ISO 8142:1990

Thermal insulation; bonded preformed man-made mineral fiber pipe sections; specification ISO 8283-1:1991

Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 1:

unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)

ISO 8283-2:1992Plastics pipes and fittings; dimensions of sockets and spigots for discharge systems inside buildings; part 2:

polyethylene (PE)


polypropylene (PP)


acrylonitrile/butadiene/styrene (ABS)

ISO 8361-1:1991Thermoplastics pipes and fittings; water absorption;part 1: general test method

ISO 8361-2:1991Thermoplastics pipes and fittings; water absorption;

part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings

ISO 8361-3:1991Thermoplastics pipes and fittings; water absorption;

part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings

ISO 8434-1, :1994Metallic tube connections for fluid power and general use -

Part 1: 24 compression fittings

ISO 8434-2:1994

Metallic tube fittings for fluid power and general use -Part 2: 37 flared fittings

ISO 8434-3:1995Metallic tube connections for fluid power and general use -

Part 3: O-ring face seal fittings


Part 4: 24 cone connectors with O-ring weld-on nipples


Part 5: Test methods for threaded hydraulic fluid power connections

ISO 8491:1998Metallic materials - Tube (in full section) - Bend test

ISO 8492:1998Metallic materials - Tube - Flattening test

ISO 8493:1998Metallic materials - Tube - Drift-expanding test

ISO 8494:1998Metallic materials - Tube - Flanging test

ISO 8495:1998Metallic materials - Tube - Ring-expanding test

ISO 8496:1998Metallic materials - Tube - Ring tensile test


11/13

ISO 8497:1994Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for

circular pipes

ISO 8572:1991Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to

pressure, including relationships between them, and terms for installation and jointing

ISO 8770:2003Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -Polyethylene (PE)

ISO 8772:1991High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems;

specifications

ISO 8773:1991Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications

ISO 8796:2004Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking

induced by insert-type fittings - Test method and requirements

ISO 9080:2003Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics

materials in pipe form by extrapolation ISO 9095:1990

Steel tubes; continuous character marking and colour coding for material identification

ISO 9261:2004Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods

ISO 9356:1989Polyolefin pipe assemblies with or without jointed fittings; resistance to internal pressure; test method

ISO 9623:1997PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of

threads - Metric series

ISO 9625:1993Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes

ISO 9691:1992

Rubber; recommendations for the workmanship of pipe joint rings; description and classification ofimperfections

ISO 9803:1993Vacuum technology; pipeline fittings; mounting dimensions

ISO/TR 9824-1:1990Measurement of free surface flow in closed conduits;

part 1: methods

ISO 9808:1990Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings; method of

assessment

ISO/TR 9824-2:1990Measurement of free surface flow in closed conduits;

part 2: equipment

ISO 9853:1991Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems; crushingtest

ISO 10147:1994Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by

determination of the gel content

ISO/TR 10358:1993Plastics pipes and fittings; combined chemical-resistance classification table


12/13

ISO 10400:1993Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe

properties

ISO 10420:1994Petroleum and natural gas industries; flexible pipe systems for subsea and marine riser applications

ISO 10422:2001

Petroleum and natural gas industries - Threading, gauging and thread inspection of casing, tubing and linepipe

ISO 10508:1995Thermoplastics pipes and fittings for hot and cold water systems

ISO 10806:2003Pipework - Fittings for corrugated metal hoses

ISO/TR 10837:1991Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings

ISO 10928:1997Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for

regression analysis and their use

ISO 10931-1:1997Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 1: General

ISO 10931-2:1997Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 2: Pipes

ISO 10931-3:1996Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 3: Fittings

ISO 10931-4:1997Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 4: Valves

ISO 10931-5:1998Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Part 5: Fitness for

purpose of the system

ISO/TR 11295:1992Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings

ISO 11413:1996Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an

electrofusion fitting ISO 11414:1996

Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies

by butt fusion

ISO 11420:1996Method for the assessment of the degree of carbon dispersion polyolefin pipe, fittings and compounds

ISO 11496:1993Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of

laminar imperfections

ISO/TR 11647:1996Fusion compatibility of polyethylene (PE) pipes and fittings

ISO 11961:1996Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification

ISO 12162:1995Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation -

Overall service (design) coefficient

ISO 13664:1997Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for

the detection of laminar imperfections

ISO 13665:1997Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for

the detection of surface imperfections


13/13

ISO 13761:1996Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use at

temperatures above 20

ISO 13783:1997Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket

joints - Test method for leaktightness and strength while subjected to bending and internal pressure

Documents

SPEC of Pipes for Shipbuilding