SPECIAL PRICES THE WABECO SUMMER PROMOTION · 6 further information at 2-axis coordinate table K400 • Clamping surface 400 x 180 mm • Longitudinal travel X-axis 320 mm • Transverse

SPECIAL PRICESTHE WABECO SUMMER PROMOTION

FREE DELIVERY within Germany from an order value of 50.00 € and a max. weight up to 40 kg

further information at www.wabeco-remscheid.de2

Design

• Solid steel column 500 mm

• Hexagonal steel boom 350 mm

Working range

• Travel Z-axis 250 mm

• Travel Y-axis 175 mm

heavy duty design

• Weight 14.1 kg

Drilling milling stand BF1240No. 24400 134.99 € 165.41 €

for machining larger workpiecesalso outside to the working rangeof the base plate


especially suited for smaller workpieces

Design



Working range



heavy duty design

• Weight 15.0 kg

WABECO precision drilling milling stands the second infeed (transverse travel on the Y-axis) enables the performance of vertical and horizontal drilling and milling work

3or in the current WABECO catalog - we shall be pleased to consult with you personally +49 2191 597-0 3

„Sent from above“

through total height of the steel column of750 mm is particularly suitable for workingwith a coordinate table


through total height of the steel column of1000 mm for example for long Forstner wood drillbit, for machining wooden draws, etc.


Design



Working range



heavy duty design

• Weight 16.7 kg

Design



Working range



heavy duty design

• Weight 18.3 kg


Drilling milling standwith 2nd machine support

2nd machine support• for the mounting of a second drive unit• suitable for all drive units with

Euronorm Ø 43 mm

BF1240 No. 24552 152.99 € 186.83 €

BF1242 No. 24582 162.99 € 199.92 €

BF1243 No. 24514 184.99 € 224.91 €

Work table• for rotating and swiveling workpieces• Work table Ø 180 mm • can be rotated and swiveled through 360° in

all directions• e.g. for oblique drilling

BF1240 No. 24404 156.99 € 195.16 €

BF1242 No. 24408 166.99 € 208.25 €

BF1243 No. 24504 188.99 € 234.43 €

BF1244 No. 24457 244.99 € 308.21 €

Drilling milling standwith work table

Drilling milling standwith clamping device

Clamping device• for horizontal mounting of drive units• suitable for all drive units with

Euronorm Ø 43 mm

BF1240 No. 24550 146.99 € 182.07 €

BF1242 No. 24580 156.99 € 195.16 €

BF1243 No. 24510 178.99 € 221.34 €

Drilling milling standwith machine vice

BF1240 No. 24556 152.99 € 193.97 €

BF1242 No. 24586 162.99 € 207.06 €

BF1243 No. 24518 184.99 € 233.24 €

Machine vice with quick adjustment• with double pillar guide• Trapezoidal thread spindle• Jaw width 100 mm

Jaw height 35 mm- Clamping width 100 mm- Weight 1.6 kg

Drilling milling standwith machine vice

BF1240 No. 24436 162,99 € 210,63 €

BF1242 No. 24445 172,99 € 223,72 €

BF1243 No. 24520 194,99 € 248,71 €

Machine vice made of gray cast iron• Trapezoidal thread spindle • Jaw width 100 mm



Drilling milling standwith step clamp set 58-pieces

Drilling milling standwith step clamp set 10 pieces

Drilling milling standwith Clamping device and machine vice

BF1240 No. 24437 171.99 € 233.24 €

BF1242 No. 24447 181.99 € 246.33 €

BF1243 No. 24524 203.99 € 272.51 €

Step clamp set• for 10 mm T-slot and M8 thread

included in delivery• 12 step blocks with stepped teeth• 6 step clamps• 6 flange nuts• 6 T-slot nuts• 24 studs• 4 extension nuts


included in delivery• 2 Step blocks with stepped teeth• 2 Step clamps• 2 Flange nuts• 2 T-slot nuts• 2 Studs

BF1240 No. 24414 149.99 € 185.64 €

BF1242 No. 24446 159.99 € 198.73 €

BF1243 No. 24522 181.99 € 224.91 €

BF1240 No. 24435 169.99 € 211.82 €

BF1242 No. 24448 179.99 € 224.91 €

BF1243 No. 24512 201.99 € 251.09 €

Drilling milling standwith 2nd machine support and machine vice

BF1240 No. 24554 173.99 € 216.58 €

BF1242 No. 24584 183.99 € 229.67 €

BF1243 No. 24516 205.99 € 255.85 €

2nd machine support• for the mounting of a second drive unit• suitable for all drive units with

Euronorm Ø 43 mmMachine vice with quick adjustment• with double pillar guide• Trapezoidal thread spindle• Jaw width 100 mm

Jaw height 35 mm- Clamping width 100 mm- Weight 1,6 kg

Clamping device• for horizontal mounting of drive units• suitable for all drive units with

Euronorm Ø 43 mm

Machine vice with quick adjustment• with double pillar guide• Trapezoidal thread spindle• Jaw width 100 mm

Jaw height 35 mm- Clamping width 100mm- Weight 1,6 kg


2-axis coordinate table K400• Clamping surface 400 x 180 mm• Longitudinal travel X-axis 320 mm• Transverse travel Y-axis 100 mm• Description and technical data can be found

on page 12

BF1240 No. 24558 251.99 € 352.24 €

BF1242 No. 24588 261.99 € 365.33 €

BF1243 No. 24526 283.99 € 391.51 €

BF1244 No. 24458 339.99 € 466.48 €

Drilling milling standwith coordinate table K400

2-axis coordinate table K600• Clamping surface 600 x 180 mm• Longitudinal travel X-axis 520 mm• Transverse travel Y-axis 100 mm• Description and technical data can be found

on page 12

BF1240 No. 24560 271.99 € 389.13 €

BF1242 No. 24590 281.99 € 402.22 €

BF1243 No. 24530 303.99 € 428.40 €

BF1244 No. 24459 359.99 € 502.18 €

Drilling milling standwith coordinate table K600

2-axis coordinate table K400• Clamping surface 400 x 180 mm• Description and technical data can be found

on page 12

BF1240 No. 24416 276.99 € 386.75 €

BF1242 No. 24449 286.99 € 399.84 €

BF1243 No. 24528 308.99 € 426.02 €

Drilling milling standwith coordinate table K400 and machine vice

2-axis coordinate table K600• Clamping surface 600 x 180 mm• Description and technical data can be found

on page 12

BF1240 No. 24438 301.99 € 435.54 €

BF1242 No. 24450 311.99 € 448.63 €

BF1243 No. 24529 333.99 € 474.81 €

Drilling milling standwith coordinate table K600 and machine vice

Machine vice made of gray cast iron• Trapezoidal thread spindle - open base plate• horizontal and vertical v-block for round material• Jaw width 100 mm


Machine vice made of gray cast iron• Trapezoidal thread spindle - open base plate• horizontal and vertical v-block for round material• Jaw width 85 mm



3-spoke hubs

No. 24466 36.90 € 45.10 €

• for WABECO drilling milling stands• for mounting by the customer

No. 22310 24.00 € 29.75 €

Work table

• Work table Ø 180 mm• can be rotated and swiveled through 360° in all directions• can be retrofitted for all drilling stands with columns-Ø 35 mm

Application• for rotating and swiveling workpieces• e.g. for oblique drilling

Example of use

No. 22312 15.50 € 17.85 €

Clamping device

No. 24460 20.00 € 22.61 €

2nd machine support

• suitable for all drilling stands and drive units withEuronorm Ø 43 mm

Application• for horizontal mounting of drive units e.g. drilling machine

• suitable for all drive units with Euronorm Ø 43 mm

Application• for the mounting of a second drive unit bei WABECO

Drilling milling stand

for vertical infeed Z-axis

No. 24462 19.90 € 23.68 €

for horizontal infeed Y-axis

No. 24464 19.90 € 23.68 €

3-spoke hubs for Z- and Y-axis


Example of use

Machine vices made of gray cast iron

No. 40523 22.99 € 29.75 €

• with double pillar guide• with rubber protective jaws• with horizontal and vertical v-block for round material• open base plate for clamping or through-drilling of• workpieces• Trapezoidal thread spindle • Jaw width 100 mm - Clamping width 100 mm• Jaw height 35 mm - Weight 1.6 kg

No. 40526 25.00 € 34.51 €• Jaw width 85 mm - Clamping width 70 mm• Jaw height 22 mm - Weight 2.4 kg

No. 40527 30.00 € 46.41 €• Jaw width 100 mm - Clamping width 100 mm• Jaw height 29 mm - Weight 3.3 kg

Machine vice with quick adjustment

• with horizontal and vertical v-block for round material• open base plate for clamping or through-drilling

of workpieces

• Trapezoidal thread spindle

• for 10 mm T-slot and M8 threadincluded in delivery

• 12 step blocks with stepped teeth • 6 step clamps• 6 flange nuts• 6 T-slot nuts• 24 studs• 4 extension nuts

Step clamp set 58 piecesNo. 24417 41.00 € 69.02 €

Step clamp set 10 piecesNo. 24412 18.00 € 21.42 €• for 10 mm T-slot and M8 thread

included in delivery• 2 Step blocks with stepped teeth• 2 Step clamps• 2 Flange nuts• 2 T-slot nuts• 2 Studs

• PU: 4 Pieces• for 10 mm T-slot and M8 thread

T-slot nutsNo. 24429 8.50 € 9.52 €


Example of use

No. 35805 28.00 € 35.70 €

Tapping attachment

• Tool holder for taps M1 - M8square clamping range 2.0 - 5.0 mm

• adjustable tap wrench size 1½• Adapter for Euronorm Ø 43 mm

suitable for all drilling stands with Euronorm Ø 43 mm

Application• for positioning the tap at an angle• Thread depth can be adjusted using a positioning ring

No. 24452 89.00 € 92.82 €

No. 24451 60.00 € 61.88 €• Length 750 mm• for a longer vertical travel of the Z-axis of 500 mm

Steel columnsfor a longer vertical working range

• Solid steel column toothed Ø 35 mm• suitable for all WABECO drilling milling stands

• Length 1000 mm• for a longer vertical travel of the Z-axis of 750 mm

No. 24453 35.00 € 39.27 €

Hexagonal steel boom for larger horizontal travel

• Hexagonal steel boom toothed ⬣ 30 mm Length 500 mm

• for a longer transverse travel of the Y-axis of 325 mm

• suitable for WABECO drilling milling stand BF1240


Clamping device for holding the tailstock center

2nd machine supportfor holding the clamping device

Tailstock center

Clamping device for mounting of a drive unit

4-spur center

Hand steel rest

standard machine supportfor holding the clamping device

Face plate

Hand steel rest

Turning with WABECO Drilling milling stands


4-spur center

• Shank Ø 10 mm, Head Ø 15 mm

Application• for clamping workpieces and for processing workpieces between

two centers without re-clamping in clockwise direction• The 4-spur center is clamped in the drive unit e.g. drilling machine.• For the horizontal mounting of the drive unit, clamping device item

no. 22312 is required. The clamping device is clamped in the machi-ne support supplied as standard equipment (see illustration).

Tailstock center

• for turning between 2 centers

Application• for processing long workpieces• The tailstock center is clamped in the clamping device item

no. 22312. A 2nd machine support item no. 24460 is required for

clamping the clamping device (see illustration).

2nd machine support Clamping device

No. 24486 9.00 € 14.28 € No. 24484 25.00 € 32.13 €

No. 24460 20.00 € 22.61 € No. 22312 15.50 € 17.85 €

Hand steel rest

• adjustable height

Application• to support the turning tool• the lower section is clamped to the base plate• for positioning at the workpiece, fully adjustable

Face plate

• with 3 set screws to hold the workpiece• Shank-Ø 10 mm• Plate-Ø 60 mm

Application• for concave turning, e.g. for bowls • for working on the face of workpieces

The face plate is clamped in the drive unit e.g.drilling machine.

No. 24482 18.00 € 23.80 € No. 24480 59.00 € 78.54 €


Application• for horizontal mounting of drive units with 4-spur center

item no. 24486• to hold the tailstock center item no. 24484


Application• for mounting of a clamping device

2nd machine support for mounting of clamping device item no.22312. The tailstock center item no. 24484 is clamped in theclamping device.

Turning with WABECO Drilling milling stands


WABECO 2-axis coordinate tables

Working range• Longitudinal travel X-axis 320 mm• Transverse travel Y-axis 100 mm• Height 105 mmCoordinate table• Clamping surface 400 x 180 mm

2-axis coordinate table K400No. 24410 119.99 € 188.02 €

2-axis coordinate table K600No. 24610 139.99 € 223.72 €Working range• Longitudinal travel X-axis 520 mm• Transverse travel Y-axis 100 mm• Height 105 mmCoordinate table• Clamping surface 600 x 180 mm

• suitable for all table drilling machines, pillar drilling machines, column drilling machines and drilling milling stands because the clamping feet can be adapted individually to each brand using the holes and/or longitudinal slots provided

• the workpiece can be precisely positioned by moving the X and Y axis

• for precise drilling and milling work

• Possibility of conversion for left-handers

K400 No. 24432 146.99 € 233.24 €

K600 No. 24632 166.99 € 268.94 €

2-axis coordinate tablewith machine vice

2-axis coordinate tablewith step clamp set 10 pieces


included in delivery• 2 Step blocks with stepped teeth• 2 Step clamps - 2 Flange nuts• 2 T-slot nuts - 2 Studs

K400 No. 24430 134.99 € 208.25 €

K600 No. 24630 154.99 € 243.95 €

2-axis coordinate tablewith step clamp set 58 pieces


included in delivery• 12 step blocks with stepped teeth• 6 step clamps - 6 flange nuts• 6 T-slot nuts - 24 studs• 4 extension nuts

K400 No. 24431 157.99 € 255.85 €

K600 No. 24631 177.99 € 291.55 €

Machine vice made of gray cast iron• Trapezoidal thread spindle - open base plate• With horizontal and vertical v-block for round

material• Jaw width 100 mm



Drilling stand B1230with machine vice

No. 22405 79.99 € 104.72 €

Machine vice with quick adjustment• Jaw width 100 mm• Clamping width 100 mm• Jaw height 35 mm• Weight 1.6 kg

Drilling stand B1230with machine vice

No. 22406 86.99 € 120.19 €

Machine vice made of gray cast iron• Jaw width 100 mm• Clamping width 100 mm• Jaw height 29 mm• Weight 3.3 kg

Drilling stand B1230with machine viceand clamping device

No. 22407 94.99 € 122.57 €

Machine vice with quick adjustment• Jaw width 100 mm• Clamping width 100 mm• Jaw height 35 mm• Weight 1.6 kg

WABECO 2-axis coordinate tables

WABECO Drilling stands B1230

• for costumer-side mounting of the mountable digital vernier scales to the 2-axis coordinate tables K400 and K600

• drilled holes and threads must be added to the coordinate table by the customer

included in delivery• Vernier scale mount and bracket for the mountable digital

vernier scales X and Y-axis• extended spindle for the Y-axis to maintain the travel in the Y-axis

and optimum distance between the hand crank and mountable digital vernier scale

for X-axis measuring 500 mm for K600

No. 24499 69.90 € 89.13 €

No. 11365 99.00 € 141.61 €

for Y-axis measuring 100 mm for K400 and K600

No. 11360 38.00 € 46.41 €

Mountable digital vernier scalessuitable for 2-axis coordinate table K400 and K600

for X-axis measuring 300 mm for K400

No. 11363 69.00 € 82.11 €

Mounting kit for 2 axis and spindle Y-axis

Example of use

14 further information at www.wabeco-remscheid.de14

• with clamping plate for fixing • 22 W fluorescent lamp• 125 mm lens• Power 230 V, 50 Hz • Length of the 2 joint arms 430 mm each• ON/OFF-switch

Application• for checking electric components, illegible drawings and writings

Magnifying lamps

No. 11527 39.99 € 64.26 €Magnification 3-fold

No. 11529 65.99 € 94.01 €Magnification 10-fold

No. 11534 64.90 € 99.96 €

Machine ligth with joint armOriginal Vertex

• with magnetic base and wall fastening panel• with flexible light arm,• Joint arm length 500 mm• with turning and swiveling joint head• Shade diameter 70 mm• halogen bulb 12V, 20 Watt• Power 230 V, 50 Hz• ON-/OFF-switch

No. 11532 49.99 € 83.18 €

Machine light with ball joint armOriginal Vertex

• with integrated magnetic base• Joint arm length 375 mm• Shade diameter 70 mm• halogen bulb 12V, 20 Watt• Power 230 V, 50 Hz• with flexible light arm, ON-/OFF-switch

Push type gun

• for grease and oil• for conical and ball-head grease nipples• with a pointed- and a hollow-/universal mouthpiece

No. 11535 19.99 € 23.68 €

No. 11536 79.90 € 118.88 €

Machine ligth with joint headsOriginal Vertex

• with fastening panel• Protection IP65 - dust-, oil- and splash water protected• double-adjustable joint arm• Joint arm length 400 mm each• adjustable aluminum joint head• Shade diameter 110 mm• halogen bulb 12V, 50 Watt• Power 230 V, 50 Hz• ON-/OFF-switch

Coolant hose with 3 nozzlesOriginal Vertex

Mist coolant systemOriginal Vertex

• with magnetic base• Coolant hose 300 mm each

No. 13810 65.00 € 77.35 €• with magnetic base• Working pressure

2 - 6 bar• Connection for

compressed air hose Ø 13 mm

No. 13815 119.90 € 177.31 €

Levelling element

• PU: 1 Piece• Vibration pick-up and absorption element• Ø 80 mm, thread M10

No. 10268 15.00 € 19.04 €

T-slot cover Original Vertex

No. 11259 19.99 € 42.84 €for T-slot 12 mm

• PU: 3 pieces• Length per cover rail 400 mm• anodized aluminum• Swarf deflector, prevents swarfs from getting into the T-slots• with bores for draining off coolant• can be cut as necessary

or in the current WABECO catalog - we shall be pleased to consult with you personally +49 2191 597-0 15

Arbor pressesPress force 1t• max. size of workpiece 145 mm• Weight without packaging 14.6 kg

Press force 2t• max. size of workpiece 215 mm

• Weight without packaging 38 kg

No. 13401 119.90 € 171.36 €

No. 13400 52.99 € 82.11 €

No. 13411 299.90 € 439.11 €

Keyway broaches HSS

• Keyway 4x4 and 5x5total length 150 mm

• Keyway 6x6 and 8x7total length 300 mm

• Keyway 2x2 and 3x3• Total length 130 mm• Guide bushings for bore

Ø 6 - 8 - 10 mm

No. 13410 94.00 € 148.75 €

Keyway broaches HSS

Lever operated sheet metal shears

No. 55791 109.00 € 177.31 €

Blade length 200 mm• Cutting power round steel 13 mm• Cutting power sheet metal and steel 6mm• Weight without packaging 17.3 kg

• for cutting of sheet metal and profiles• Base with four fixing bores• infinitely adjustable holding-down device

Blade length 125 mm• Cutting power round steel 11 mm• Cutting power sheet metal and steel 6 mm• Weight without packaging 10.0 kg

No. 55790 69.00 € 117.81 €

• for clamping in vices• for sheet metal working• several folding operations with different distances possible without taking out the sheet• Steel sheets up to 1.2 mm• Aluminum and copper sheets up to 1.5 mm• bending angle max. 120°

Folding presses

No. 55780 99.99 € 166.60 €Working range 450 mm


with workbench vice 100 mm



without workbench vice

Image: some bending examples

• suitable for all drilling machines with Euronorm Ø 43 mm

• Holder head swiveling or rotating• universally applicable e. g. for

grinding or polishing work

No. 20140 10.00 € 11.90 €

Universal holder for drilling machines

Example of use


Aluminum pipe andprotective jaws

for 100 mm No. 40122 6.30 € 7.97 €for 125 mm No. 40123 7.30 € 9.16 €for 150 mm No. 40124 7.90 € 10.00 €

for 100 mm No. 40612 7.20 € 9.04 €for 125 mm No. 40613 8.20 € 10.35 €for 150 mm No. 40614 9.10 € 11.42 €

• with horizontal v-block for round material

Plastic pipe and protectivejaws• with horizontal and vertical v-block for

round material• with magnetic adhesion

• with steel jaws• made of gray cast iron• Jaw width 50 mm• Clamping width 50 mm• Clamping depth 32 mm• Clamping width of the clamp 50 mm

No. 40503 12.00 € 17.85 €

Vice rotates 360°

Swivel base for workbench viceWorkbench vicesfree of play adjustable guideswith pipe gripping jaws

Jaw width 125 mm · Clamping width 125 mm

Jaw width 100 mm · Clamping width 100 mm

No. 40102 50.00 € 55.93 €

No. 40103 75.00 € 82.11 €

• 8 pieces• Ø 1.6-2.4-3.2-4.6-4.8-5.6-6.4-8.0• Length 100 mm• 20 mm pin length

No. 13290 10.00 € 16.66 €• with spring mechanism for one

handoperation• Punch force infinitely variable via

knurled screw• Length 130 mm • Shank Ø 14 mm

No. 13295 10.00 € 16.66 €• telescopes up to approx. 615 mm• magnet Ø about 12 mm

No. 13980 4.70 € 8.33 €

Telescopic magnetic pick-up tool Auto center punch Original Vertex Pin punch set

Example of use

No. 40112 23.00 € 28.56 €

No. 40113 25.00 € 30.94 €

Height adjuster

suitable for workbench vice No. 40102

suitable for workbench vice No. 40103

• suitable for workbench vices item no. 40102, 40103 and 40104

• rotating by 360°• Height adjustment by 300 mm• Clamping plate 130 x 130 mm• Clamping bore Ø 13 mm• Center distance clamping bore 78 - 108 mm• removeable lift insert with pressure spring, the spring is used to balance

the weight of the vice• Working height can be adapted quickly and easily to suit any person‘s

height• suitable for all workbenches

No. 40118 85.00 € 102.34 €

• the vice can be rotated by 360° on this swivel base• can be fixed in any position


Machine vices made of gray cast iron• made of hardened steel• all sides ground• with prism jaw• Accuracy 0.005 mm• Workpiece machining on 4 different sides

No. 40596 Jaw width 50 mmClamping width 67 mmJaw height 25 mm

63.90 €86.87 €


84.90 €117.81 €


125.90 €141.61 €


25.00 €34.51 €


30.00 €46.41 €


35.00 €58.31 €

Machine vices

• made of hardened steel• all sides ground• with prism jaw• Workpiece machining on 4 different sides• Pull-down clamping system for high accuracy• Accuracy 0.005 mm


29.90 €42.84 €


49.90 €73.78 €


59.90 €85.68 €


89.90 €124.95 €


163.90 €208.25 €

No. 40588

Toolmakers vices

1-axis machine vice

• 1 axis with degree scale• rotating by 360°• Jaw width 50 mm• Clamping width 50 mm• Jaw height 25 mm

No. 40585 79.00 € 103.53 €

2-axes machine vice

• 2 axes with degree scales• rotating by 360°• 90° horizontal-vertical

swiveling


97.90 €136.85 €


159.90 €195.16 €

• made of hardened steel• all sides ground• with prism jaw• swiveling by 45°• Pull-down clamping system for high accuracy• Accuracy 0.005 mm


94.00 €135.66 €


115.00 €160.65 €

Sine vice swiveling

1-axis machine vice Original Vertex


139.00 €177.31 €


179.00 €232.05 €

• made of high-quality cast iron• with adjustable guides• hardened and ground steel jaws• ground guiding surface• 1 axis with degree scale• rotating by 360°


Step clamp sets 10 pieces

for 10 mm T-slot widthM8 Thread

No. 24412 18.00 €21.42 €

for 12 mm T-slot widthM10 Thread

No. 24415 18.00 €21.42 €

included in delivery• 12 step blocks with stepped teeth• 6 step clamps• 6 flange nuts• 6 T-slot nuts • 24 studs• 4 extension nuts

for 10 mm T-slot width M8 Thread

No. 24417 41.00 €69.02 €


No. 24413 42.00 €70.21 €


No. 24418 51.00 €82.11 €


No. 24419 74.00 €105.91 €

included in delivery• 2 Step clamps• 2 Flange nuts• 2 Step blocks with stepped teeth• 2 T-slot nuts und 2 Studs

Step clamp sets 58 pieces

V-block adjustableNo. 11350 45.00 € 77.35 €• 32 x 25 x 75 mm• with scale and vernier• Swivel range 0-60° and 0-30°• used as an underlay in the vice for machining workpieces under different working levels

Clamping angle 90°• Cast version with lateral reinforcing ribs• both clamping surfaces are ground• for drilling, milling and marking work• for clamping on the machine table to clamp th workpieces and set-up at an angle to the vertical• on marking tables, measuring tables, straightening tables, welding tables etc. to position workpieces vertically

Longitudinal slots 3 x 12 mm Transverse slot 1 x 14 mm Dimensions 115 x 90 x 75 mm

No. 13500 39.90 €82.11 €

Work stop tool Original Vertex

No. 40810 119.00 € 177.31 €• 5 axes infinitely rotatable and slidable• rotating by 360°• can be used as an inner and outer stop

Wave-shaped parallels Parallels Parallels

• 8 pairs• 2 mm ascending from 9-23 mm, 0.5 mm thick• Accuracy 0.01 mm• Length 110 mm

No. 11661 29.99 € 47.60 €• 6 pairs• 4x10, 4x15, 4x20, 4x25, 4x30, 4x35 mm• Accuracy 0.01 mm• Length 120 mm

No. 11659 44.99 € 83.18 €• 9 pairs • 8,5x14, 8,5x16, 8,5x20, 8,5x24, 8,5x30, 8,5x32, 8,5x36, 8,5x40, 8,5x44 mm• Accuracy 0.01 mm• Length 150 mm

No. 11660 58.99 € 117.81 €

3-axes articulated vice

• 3 axes with degree scales• rotating by 360°• 90° horizontal-vertical swiveling• 45° left-right swiveling each• Jaw width 50 mm• Clamping width 50 mm• Jaw height 22 mm

No. 40565 119.00 € 160.65 €

Dimensions 4 x 18 mmTransverse slot 6 x 18 mmDimensions 204 x 120 x 155 mm

No. 13502 80.00 €117.81 €


Mountable digital vernier scales for horizontal mounting

Mountable digital vernier scalesfor vertical mounting

Measuring length 100 mm No. 11360 38.00 € 46.41 €












• 0.01 mm reading accuracy• reversible metric/inch• Zero position• Mini-USB interface for position display• can be cut to any desired intermediate size

• 0.01 mm reading accuracy• reversible metric/inch• Zero position• Mini-USB interface for position display• can be cut to any desired intermediate size

Single and 3-axes position readout (DRO) with power plug

No. 11356 66.00 € 113.05 €

• 5-digit LCD display with light• reading accuracy 0.01 mm• reversible metric/inch• Zero position• solid plastic housing with magnetic mount

No. 11358 149.00 € 248.71 €

Vernier calipers• Reading accuracy 0.05 mm• with locking screw and depth gauge

100 mm No. 11314 10.50 € 15.47 €

150 mm No. 11322 11.50 € 17.85 €

Dial vernier caliper

• Measuring range 150 mm• Reading accuracy 0.02 mm• with locking screw and depth gauge

No. 11319 19.99 € 29.75 €

Electronic digital vernier calipers• 5-digit LCD display• Reading accuracy 0.01 mm• with locking screw and depth gauge

100 mm No. 11328 14.00 € 29.75 €

150 mm No. 11320 15.00 € 35.70 €

200 mm No. 11321 24.00 € 47.60 €

Single axis position readout (DRO) with power plug• 1 connecting cable for Mini-USB port

3-axes position readout (DRO) with power plug• 3 connecting cables for Mini-USB port

Vernier depth gauge

• Measuring range 200 mm• Reading accuracy 0.05 mm• Rest 100 mm• with locking screw

No. 11323 20.00 € 33.32 €

Digital vernier depth gauge

• Measuring range 150 mm• 5-digit LCD display• Reading accuracy 0.01 mm• Rest 100 mm• with locking screw

No. 11327 27.00 € 35.58 €

Marking vernier caliper

• Measuring range 200 mm• Reading accuracy 0.05 mm• with guide roller• hardened and ground

No. 13125 22.50 € 35.58 €


Micrometer Digital micrometers

• Measuring range 0 - 25 mm• Reading accuracy 0.01 mm• according to DIN 863

• 5-digit LCD display• Reading accuracy 0.001 mm• according to 863

No. 11301 12.90 € 17.85 €

0-25 mm No. 11392 50.00 €77.35 €

25-50 mm No. 11393 60.00 €89.25 €

Micrometer set

• 4 pieces• Measuring range 0 - 25, 25 - 50, 50 - 75 and 75 - 100 mm

• according to DIN 863• Reading accuracy 0.01 mm

No. 11317 59.90 € 95.08 €

Two point inside micrometer set

• 3 inside micrometers with measuring range 5 - 30, 25 - 50 mm and 50 - 75 mm• Reading accuracy 0.01 mm• according to DIN 863• Measuring spindle 0.5 mm upwards• with locking screw and ratchet

No. 13114 125.00 € 178.50 €

Two point inside micrometers• Reading accuracy 0.01 mm• according to DIN 863• Measuring spindle 0.5 mm upwards• with locking screw and ratchet

5-30 mm No. 13115 39.00 € 53.55 €25-50 mm No. 13116 45.00 € 65.45 €

Holder for micrometer

• suitable for micrometers from 0 to 100 mm

No. 11304 19.99 € 23.68 €

V-block pair

44x41x35 mm, clamping Ø up to 30 mm

No. 11305 32.00 € 46.41 €

Single V-block• PU: 1 Piece • hardened V-block with clamping bracket• all sides ground


No. 11306 16.00 € 22.61 €

V-block set

• PU: 2 Pieces• 1 V-block 44x41x35 mm

clamping Ø up to 30 mm• 1 V-block 70x45x41 mm

clamping Ø up to 42 mm • hardened V-block with clamping bracket• all sides ground

No. 11307 40.00 € 49.98 €


No. 11309 24.00 € 28.56 €

• PU: 2 Pieces • hardened V-blocks with clamping bracket• all sides ground


No. 11308 48.00 € 58.31 €

Universal angle plate setNo. 11347 26.99 € 34.51 €• 30° - 45° - 60° - 90°• Hole Ø 8 mm• Width 6.35 mm

Inside micrometer set

• 11 pieces• Measuring range 50 - 600 mm• Reading accuracy 0.01 mm• Control gauge 50 mm

No. 11316 85.00 € 130.90 €

Bore gauge

• 15 pieces• Measuring range 20 - 200 mm• Dial gauge, 4 replaceable gauging pins - 4 extension rods• Reading accuracy 0.01 mm

No. 13121 129.00 € 177.31 €


Marking and height gauge

• Measuring height 300 mm• 2 locking screws• Precise adjustment• adjustable carbide tip• for marking holes, slots, etc.

on different workpieces

No. 11325 44.00 € 88.06 €

Digital markingand height gauge

• Measuring height 300 mm• 5-digit LCD display• Reading accuracy ± 0.01 mm• Reset button• 2 locking screws• Precise adjustment• adjustable carbide tip

No. 11326 114.99 € 196.35 €

Vernier protractor

• Rail length 150 mm• Measuring range 0 - 180°• Reading accuracy 1°

No. 13105 14.00 € 14.88 €

Divider with scriber

• Rail length 150 mm• Scriber 150 mm• Opening width 190 mm• hardened tips• clamping screw

No. 13101 14.00 € 20.83 €

Edge finder with centering point

• Clamping shank Ø 10 mm• Total length approx. 75 mm• Probe Ø 4 mm and conical• Alignment accuracy 0.01 mm

No. 11329 12.50 € 22.61 €

Edge finder

• Clamping shank Ø 10 mm• Total length approx. 85 mm• Probe Ø 10 mm• Alignment accuracy 0.01 mm

No. 11330 10.00 € 22.61 €

Edge finder set

• Clamping shank Ø 10 and 12 mm• Probe Ø 4, 10 and 12 mm and conical• Alignment accuracy 0.01 mm

No. 11331 26.00 € 45.22 €

Center indicator with dial gauge

• Dial Ø 40 mm, 0 - 3 mm• Clamping shank Ø 10 mm• Head length 135 mm• Reading accuracy 0.01 mm• with 3 outside and inside feelers each

length: 45, 100 and 150 mm• resilient scriber• with stop rod for fixing the head

No. 11337 90.00 € 130.90 €

Measurement and test boardNo. 11395 98.00 € 213.01 €

Machine level

• Length 200 mm• 0.02 mm/m accuracy• with longitudinal and transverse lobes• ground seating surface

No. 11353 62.00 € 95.08 €

2D edge finder with LED display

• LED display• acoustic signal sound with workpieces

made of metal• hardened probe ball Ø 10 mm• Clamping shank Ø 20 mm• Length aprox. 160 mm• Alignment accuracy 0.01 mm

No. 13172 39.50 € 77.35 €

• 450 x 450 x 75 mm• DIN 876/1• without measuring tools• Weight 46.5 kg

Telescopic gauge set

• 6 pieces• Measuring range

8 - 12.7 | 12.7 - 19 | 19 - 32 |32 - 54 | 54 - 90 and 90 - 150 mm

No. 11315 36.00 € 58.31 €


Dial test indicator Dial gauge

• Dial Ø 30 mm• Measuring span 0.8 mm• Reading accuracy 0.01 mm• Scale 0 - 40 - 0• Feeler length 12 mm• Measuring insert equipped with carbide ball Ø 2 mm• with dovetail guides for clamping shank• incl. clamping shank Ø 6 and 8 mm

• Measuring range 10 mm• Scale division 0.01 mm• Clamping shank Ø 8 mm h6• Metal casing matt-chromium finished Ø 55 mm• according to DIN 878

No. 13160 28.00 € 46.41 € No. 11334 13.00 € 21.42 €

Magnetic measuring stand

• mechanical clamping of the magnetic base• Holding force 50 kg• Magnetic base W50 x D63 x H55 mm• adjustable to many positions• Location hole Ø 8 mm• Measuring column Ø 12 x 160 mm• Transverse arm Ø 10 x 150 mm

No. 11333 16.99 € 23.80 €• central clamping of the measuring column

enabling easy and fast fixing in almost every position

• mechanical clamping of the magnetic base• Holding force 80 kg• Magnetic base W50 x D63 x H55 mm• Location hole Ø 8 mm• Length 340 mm

No. 11332 27.50 € 47.48 €

Magnetic measuring stand with central clamping

No. 11338 39.90 € 65.45 €

Magnetic measuring stand with central clamping of the measuring column with dial gauge

Magnetic measuring stand with dial gaugeNo. 11335 23.50 € 42.84 €

No. 13161 44.00 € 67.83 €

Magnetic measuring stand with dial test indicator

No. 13162 55.00 € 89.25 €

Magnetic measuring stand with dial gaugeand dial test indicator

• Description seeItem no. 11333 and 11334



• Description seeItem no. 11333, 11334and 13160

Digital dial gauge • Measuring range 10 mm• Reading accuracy 0.01 mm• Clamping shank Ø 8 mm h6• 4-digit LCD display• Zero position button• reversible metric/inch• Metal casing matt-chromium finished Ø 58 mm

No. 11336 28.50 € 82.11 €


Quick-change tool post sets 5 pieces

Size Aa (A0)

included in delivery• 1x quick-change tool post, main body size Aa (A0) • 1x boring steel holder size Aa (A0) • 3x turning tool holder size Aa (A0)

No. 10793 169.00 € 367.71 €

• very precise locating fixture • rapid tool change• the tool blade always returns to exactly the same position after

changing the tool post• the repeating accuracy is 0.01 mm• the height of the tool blade tip can be adjusted quickly by means

of an adjusting screw on each tool holder• 40 different angular settings

Quick-change tool post sets 3 pieces

Size Aa (A0)

included in delivery• 1x quick-change tool post, main body size Aa (A0)• 2x turning tool holder size Aa (A0)

No. 10795 129.00 € 293.93 €

• very precise locating fixture• rapid tool change• the tool blade always returns to exactly the same position

after changing the tool post• the repeating accuracy is 0.01 mm• the height of the tool blade tip can be adjusted quickly

by means of an adjusting screw on each tool holder• 40 different angular settings

Parting blade

Parting tool holder for holding parting bladeQuick-change tool post,main body

• Length 100 mm• Thickness 2.7 mm - height 10 mm

No. 10790 28.00 € 35.11 €

No. 10782 77.00 € 95.20 €

Size Aa (A0)• 4 clamp screws

No. 10780 95.00 € 189.21 €

Size Aa (A0)

Boring steel holder

No. 10781 29.00 € 61.88 €

Size Aa (A0)

• for holding cylindrical tools such as boring steels• compatible e.g. with following producers: AXA, Klopfer, Multi Suisse

• for boring tools up to max. 12 mm• 4 clamp screws - total length 50 mm

Turning tool holder

No. 10783 29.00 € 58.31 €

• for holding rectangular tools• compatible e.g. with following producers: AXA, Klopfer, Multi Suisse

Size Aa (A0) • for turning tools up to max. 12 mm• 4 clamp screws - total length 50 mm

• very precise locating fixture • the repeating accuracy is 0.01 mm• 40 different angular settings• compatible e.g. with following

producers: AXA, Klopfer, Multi Suisse


Carbide-tipped turning tool setNo. 10910 15.90 € 23.80 €• 6 pieces• Cross section 10 x 10 mm• with carbide tips P30

Carbide-tipped turning tool sets

Cross section

8 x 8 mm No. 10911 20.00 € 42.84 €

10 x 10 mm No. 10912 21.00 € 45.22 €

12 x 12 mm No. 10913 27.00 € 52.36 €

16 x 16 mm No. 10914 41.00 € 69.02 €

20 x 20 mm No. 10909 53.00 € 80.92 €

• 10 pieces• with carbide tips P30

Turning tool sets for indexable inserts

Cross section

8 x 8 mm No. 10860 98.00 € 165.41 €

10 x 10 mm No. 10861 99.00 € 166.60 €

Carbide tip indexable inserts

No. 10865 35.00 € 46.41 €• PU: 5 Pieces• each indexable insert has 4 cutting edges• Plate form CCMT

• 7 pieces• with key• each turning tool with indexable insert• each indexable insert has 4 cutting edges• in aluminium cassette

HSS turning tool sets

Cross section

4 x 4 mm No. 10915 29.00 € 41.65 €6 x 6 mm No. 10918 31.00 € 52.36 €8 x 8 mm No. 10916 34.00 € 55.93 €

10 x 10 mm No. 10917 36.00 € 67.83 €12 x 12 mm No. 10919 41.00 € 80.92 €

• 8 pieces• all turning tools have precision-ground

cutting edges and flanks

No. 108601 Left-hand turning tool 15.00 € 30.94 €No. 108602 Right-hand turning tool 15.00 € 30.94 €No. 108603 Right-hand facing tool 15.00 € 30.94 €No. 108604 Right-hand straight turning tool 15.00 € 30.94 €No. 108605 Pointed turning tool 15.00 € 30.94 €

No. 108611 Left-hand turning tool 16.00 € 32.13 €No. 108612 Right-hand turning tool 16.00 € 32.13 €No. 108613 Right-hand facing tool 16.00 € 32.13 €No. 108614 Right-hand straight turning tool 16.00 € 32.13 €No. 108615 Pointed turning tool 16.00 € 32.13 €

Single turning toolswith indexable insert and keyCross section 8 x 8 mm

Single turning toolswith indexable insert and key Cross section 10 x 10 mm

Boring barwith indexable insertright-hand cutting for internal turning

Shank Ø 8 mm lowest turning Ø 10 mm

No. 108616 16.50 € 45.22 €Shank Ø 10 mm lowest turning Ø 12 mm

No. 108606 16.00 € 45.22 €

No. 109111 Parting tool 6.30 € 7.85 €No. 109112 Inside turning tool for corner work 6.30 € 7.85 €No. 109113 Right-hand offset turning tool 90° 6.30 € 7.85 €No. 109114 Right-hand cranked turning tool 45° 6.30 € 7.85 €No. 109117 Right-hand face turning tool 6.30 € 7.85 €

Single carbide-tipped turning tools with carbide tip P30 Cross section 8 x 8 mm

No. 109101 Parting tool 6.50 € 8.09 €No. 109102 Inside turning tool for corner work 6.50 € 8.09 €No. 109103 Right-hand offset turning tool 90° 6.50 € 8.09 €No. 109104 Right-hand cranked turning tool 45° 6.50 € 8.09 €No. 109105 Outside thread turning tool 60° 6.50 € 8.09 €

Single carbide-tipped turning toolswith carbide tip P30 Cross section 10 x 10 mm


Parting tool holderwith 2 parting blades HSS

Cross section8x8 mm No. 10839 9.50 € 19.04 €10x10 mm No. 10834 10.50 € 19.04 €

• Parting blade thickness 1.5 mm• Length 63 mm

Live center setNo. 10768 89.00 € 124.95 €

Live centers

MT2 No. 10766 25.50 € 41.65 €

MT3 No. 10770 29.00 € 51.17 €

MT4 No. 10771 31.50 € 58.31 €

• 8 pieces• Morse taper MT2• with interchangeable inserts

Center drill set HSSNo. 10846 12.00 € 17.85 €• 4 center drills HSS DIN 333 with nominal Ø 1.00, 2.00, 2.50 and

5.00 mm• 60° countersink angle

Knurling toolNo. 10920 12.00 € 19.04 €• cross section 12 x 12 mm• with 2 cross knurling wheels• width 9.5 mm, Ø 19 mm• used to profile spindle screws, nuts e.g.

Knurling holderNo. 10921 21.00 € 34.51 €• cross section 10 x 10 mm• with 2 cross knurling wheels• width 9.5 mm, Ø 19 mm• used to profile spindles, screws,

nuts e.g.

2-fold knurling toolNo. 10923 12.00 € 22.61 €• cross section 10 x 10 mm• with 2 straight knurling wheels, rough and fine• width 6 mm, Ø 18 mm• used to profile spindles, screws, nuts e.g.

Parting tool holder with parting insert Replacement Parting insertNo. 1090650 38.00 € 47.60 €No. 10840 99.00 € 151.13 €

• industrial quality • Cross section10 x 10 mm

• Thickness 2,2 mm• PU: 5 Pieces

Tapping attachment Tool turret with 6 tool positions

• 9 pieces• MT2 and flat tang• 4 die holders Ø 16 - 20 - 25 - 30 mm• 4 tap holders Ø 5 - 6 - 7 - 10 mm

No. 11691 99.90 € 118.88 €• 21 pieces• MT2 and tightening thread M10• with 6 cylindrical location holes Ø 16 mm • for tailstock

No. 10798 199.99 € 303.45 €

Example of use


3-jaw lathe chucks 4-jaw lathe chucks

Ø 80 mm No. 10700 55.00 € 99.96 €

Ø 100 mm No. 10711 59.00 € 109.48 €

Ø 125 mm No. 10721 79.00 € 135.66 €

Ø 160 mm No. 10752 109.00 € 196.35 €

Ø 80 mm No. 10728 77.00 € 157.08 €

Ø 100 mm No. 10729 87.00 € 172.55 €

Ø 125 mm No. 10731 109.00 € 177.31 €

Ø 160 mm No. 10753 139.00 € 272.51 €

• centrically clamping• Turning and drilling jaws• Clamping key• Fastening screws

• centrically clamping• Turning and drilling jaws• Clamping key• Fastening screws

Ø 80 mm No. 10705 95.00 € 141.61 €

Ø 100 mm No. 10714 99.00 € 153.51 €

3-jaw chucks MT2-M10• centrically clamping• turning and drilling jaws • clamping key

Independent chucks

Ø 80 mm No. 13310 65.00 € 97.58 €

Ø 100 mm No. 13314 79.00 € 105.91 €

Ø 125 mm No. 13318 89.00 € 124.95 €

Ø 160 mm No. 13322 115.00 € 160.65 €

• heavy version for industrial use• with 4 stepped reverse-clamping jaws, which can be adjusted individually and independently of each other• for clamping large and irregularly shaped workpieces

Combi shell end mill arbor MT2x16 with keyNo. 11731 38.00 € 94.01 €• with morse taper MT2x16 and tightening thread M10• with mill retaining screw and feather key• for mills with longitudinal and transverse slot

Arbor spacer setNo. 11650 12.00 € 38.08 €• 5 pieces• width 1 - 2 - 5 - 10 - 20 mm• suitable for combi shell end mill arbors with location

hole Ø 16 mm

Combi shell end mill arbor MT2x16 with keyand arbor spacers

No. 11732 49.00 € 132.09 €

included in delivery• Combi shell end mill arbor• Key for combi shell end mill arbor• 5 arbor spacers width 1 - 2 - 5 - 10 - 20 mm

Combi shell end mill arbor MT2x16 with key,arbor spacers, shell end mills and slitting saw blade

No. 11733 91.00 € 220.15 €

included in delivery• Combi shell end mill arbor• Key for combi shell end mill arbor• 5 arbor spacers width 1 - 2 - 5 - 10 - 20 mm• Shell end mill Ø 40, width 40 mm• Metal slitting saw blade HSS Ø 63, width 2 mm


Shell end mills HSS

Ø 40 mm width 20 mm No. 11920 21.50 € 46.41 €Ø 35 mm width 35 mm No. 11921 25.50 € 58.31 €Ø 40 mm width 40 mm No. 11922 36.50 € 65.45 €

• Location hole Ø 16 mm• Finishing cutter with fine toothing• with longitudinal and transverse slot

Shell end mill HSSNo. 11925 36.00 € 77.35 €• Location hole Ø 16 mm• Ø 40 mm• Width 40 mm • Roughing mill with rough toothing• with longitudinal and transverse slot

• Location hole 16 mm, Ø 50 mm• cuts on 3 sides

No. 11930 width 4 mm 15.00 € 33.32 €No. 11931 width 5 mm 16.00 € 34.51 €No. 11932 width 6 mm 17.00 € 35.70 €No. 11933 width 8 mm 18.00 € 38.08 €No. 11934 width 10 mm 20.00 € 40.46 €

Single-angle milling cutters HSS

Milling angle 45°

No. 11910 29.00 € 53.55 €Milling angle 60°

No. 11911 29.00 € 53.55 €

• Location hole Ø 16 mm• Ø 63 mm• with longitudinal slot

Metal slitting saw blades HSS

Width 1 mm No. 11951 10.00 € 27.37 €

Width 2 mm No. 11952 12.00 € 28.56 €

• Location hole Ø 16 mm• Ø 63 mm • with lateral clearance

No. 11960 39.00 € 58.91 €

Metal slitting saw blade set HSS

included in delivery• Holder for metal slitting saw blade

location shank Ø 12 mm• 3 metal slitting saw blade location hole

Ø 16 mm - Ø 63 mm width 1.0 - 1.5 and 2.0 mm

No. 1190780 Ø 6 mm location hole






Weldon end mill arborsMT2-M10

23.90 € each 33.32 €

Morse taper sleevesMT2-M10

No. 13001 Ø 1 mm No. 13008 Ø 8 mmNo. 13002 Ø 2 mm No. 13009 Ø 9 mmNo. 13003 Ø 3 mm No. 13010 Ø 10 mmNo. 13004 Ø 4 mm No. 13011 Ø 11 mmNo. 13005 Ø 5 mm No. 13012 Ø 12 mmNo. 13006 Ø 6 mm No. 13013 Ø 13 mmNo. 13007 Ø 7 mm

9.00 € each 17.85 €

• for inserting directly into the tool spindle• short outreach, ensures improved stiffness

• for inserting directly into the tool spindle• the end mill arbors serve to tighten tools with a lateral driving surface

Side milling cutters HSS


End mill set solid carbideSlotting mill set solid carbide

• 5 pieces• 2 flutes slotting mills• Cutter Ø 4, 5, 6, 8, 10 mm• with straight shank

No. 11826 57.00 € 77.35 €

• 5 pieces• 4 flutes end mills• Cutter Ø 4, 5, 6, 8, 10 mm• with straight shank

No. 11869 57.00 € 77.35 €

End mill set “Titanium”-coatedSlotting mill set “Titanium”-coated

• 11 pieces• short with straight shank• 2 flutes slotting mills• helically grooved

No. 11825 37.90 € 59.50 €

• 9 pieces• short with straight shank• 4 flutes end mills• helically grooved

No. 11843 35.90 € 5355 €

Cutter Ø mm 4 5 6 8 10 12 14 16 18

Shank Ø mm 6 6 6 10 10 12 12 16 16

Cutter Ø mm 2 3 4 5 6 8 10 12 14 16 18

Shank Ø mm 6 6 6 6 6 10 10 12 12 16 16

Collet chuck MT2-M10 with keyNo. 11728 58.00 € 127.33 €

Collet set MT2-M10

• Clamping range with collets 3 - 16 mm (collets are not part of the delivery)

• for mounting the collets item no. 11703 to 11716

• 16 piecesincluded in delivery• Collet chuck MT2-M10 clamping

range with collets 3-16 mm• Key for collet chuck• 14 collets from Ø 3 to 16 mm

according to DIN 415E OZ• in aluminium cassette

No. 11734 199.90 € 355.81 €

Collets according to DIN 415E OZ No. 11703 Ø 3 mm No. 11710 Ø 10 mmNo. 11704 Ø 4 mm No. 11711 Ø 11 mmNo. 11705 Ø 5 mm No. 11712 Ø 12 mmNo. 11706 Ø 6 mm No. 11713 Ø 13 mmNo. 11707 Ø 7 mm No. 11714 Ø 14 mmNo. 11708 Ø 8 mm No. 11715 Ø 15 mmNo. 11709 Ø 9 mm No. 11716 Ø 16 mm

15.00 € each 23.21 €• double slotted• with a clamping range of up to 0.5 mm

below nominal size, i.e. e.g. the collet 8 mm can clamp up to 7.5 mm

Slotting mill “Titanium”-coated• short with straight shank• 2 flutes• straight grooved

Cutter Ø 2 mm Shank Ø 6 mm No. 11810 4.50 €Cutter Ø 3 mm Shank Ø 6 mm No. 11811 4.50 €Cutter Ø 4 mm Shank Ø 6 mm No. 11812 4.50 €Cutter Ø 5 mm Shank Ø 6 mm No. 11813 5.00 €Cutter Ø 6 mm Shank Ø 6 mm No. 11814 5.50 €Cutter Ø 8 mm Shank Ø 10 mm No. 11815 6.00 €Cutter Ø 10 mm Shank Ø 10 mm No. 11816 7.00 €Cutter Ø 12 mm Shank Ø 12 mm No. 11817 8.00 €Cutter Ø 14 mm Shank Ø 12 mm No. 11818 9.50 €Cutter Ø 16 mm Shank Ø 16 mm No. 11819 11.50 €Cutter Ø 18 mm Shank Ø 16 mm No. 11820 13.50 €

End mill “Titanium”-coated• short with straight shank• 4 flutes end mills• helically grooved

Cutter Ø 3 mm Shank Ø 6 mm No. 11829 5.00 €Cutter Ø 4 mm Shank Ø 6 mm No. 11830 5.00 €Cutter Ø 5 mm Shank Ø 6 mm No. 11831 5.50 €Cutter Ø 6 mm Shank Ø 6 mm No. 11832 6.00 €Cutter Ø 8 mm Shank Ø 10 mm No. 11833 6.50 €Cutter Ø 10 mm Shank Ø 10 mm No. 11834 7.50 €Cutter Ø 12 mm Shank Ø 12 mm No. 11835 9.00 €Cutter Ø 14 mm Shank Ø 12 mm No. 11836 10.50 €Cutter Ø 16 mm Shank Ø 16 mm No. 11837 12.50 €Cutter Ø 18 mm Shank Ø 16 mm No. 11838 14.50 €


Mill set “Titanium”-coatedMill set “Titanium”-coatedNo. 11873 39.90 € 59.50 €

Cutter Ø mm 3 4 6 8 10 12

Shank Ø mm 6 6 6 10 10 12Cutter Ø mm 3 4 5 6 8 10 12 14 18 20

Shank Ø mm 6 6 6 6 10 10 12 12 16 16

• 12 pieces• 6 slotting mills - 2 flutes• 6 end mills - 4 flutes

• 20 pieces• 10 slotting mills - 2 flutes• 10 end mills - 4 flutes

No. 11870 68.00 € 113.05 €

Ø mm 10,5 10,5 19,5 19,5 19,5 22,5 25,5 28,5 32,5

Cutter width mm 2 3 4 5 6 5 6 8 10

Slot cutter set HSSNo. 11888 98.00 € 160.65 €• 9 pieces• Shank Ø 12 mm• with straight shank, cross toothed

Angle milling cutter set 60° HSS

Ø mm 13 16 20 25 32

Shank Ø mm 12 12 12 12 16

• 5 pieces• with straight shank• Milling angle 60°

No. 11887 84.00 € 113.05 €

Corner rounding end mill set HSSNo. 11889 64.00 € 130.90 €• 8 pieces• with straight shank• straight toothed

Radius mm 1 2 3 4 5 6 8 10

Shank Ø mm 10 10 12 12 12 16 16 16

Radius mill set HSS

Cutter Ø mm 4 5 6 8 10

Shank Ø mm 6 6 6 10 10

Radius mm 2 2,5 3 4 5

• 5 pieces• with straight shank• 4 flutes

No. 11885 39.90 € 53.55 €

Carbide milling cutter setNo. 11890 59.50 € 77.35 €• 14 pieces• with straight shank• Shank Ø 3 mm

Ø mm 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0

No. 11881 9.00 € 21.42 €

• with straight shank• 2 flutes• with center drill tip

Step drill “Titanium”-coated

No. 11882 14.50 € 28.56 €

• Steps Ø 5 - 28 mm• Shank Ø 10 mm

• Steps Ø 4 - 12 mm• Shank Ø 6 mm

Storage box for millsNo. 13600 18.99 € 23.68 €

Folder 15 12 5 5 8 7 6 2 2

for Shank Ø mm 6 8 10 12 16 20 25 32 42

• Plastic box for 62 mills


Quick-action drill chuckwith drill chuck arbor MT2included in delivery• Quick-action drill chuck inner

taper B16• Drill chuck arbor MT2 with

flat tang outer taper B16

Quick-action drill chuckwith drill chuck arbor MT2-M10included in delivery• Quick-action drill chuck inner

taper B16• Drill chuck arbor MT2 and

tightening thread M10 outer taper B16

Clamping width 1 - 13 mm


No. 11622 26.00 € 71.40 €

No. 11626 29.00 € 71.40 €



No. 11630 49.00 € 107.10 €

No. 11631 52.00 € 107.10 €

No. 11621 20.00 € 47.60 €included in delivery• Key-type drill chuck clamping

width 1.5 - 13 mm inner taper B16

• Drill chuck arbor MT2 with flat tang outer taper B16

Key-type drill chuck with drill chuck arbor MT2No. 11635 7.99 € 10.12 €• morse taper MT3 outside• morse taper MT2 inside• with flat tang

Drill sleeve from MT3 to MT2

Boring head MT2-M10with boring bar setNo. 11663 99.90 € 178.50 €• Head Ø 50 mm• Feed accuracy 0.02 mm• Location hole 12 mm• Boring diameter

max. 60 mm

Boring head MT2-M10with boring bar setNo. 11672 120.00 € 207.06 €• Head Ø 75 mm• Feed accuracy 0.02 mm• Location hole 20 mm• 1 drill sleeve from shank

Ø 20 to 12 mm• Boring diameter

max. 120 mm

Countersink bit set 90° HSS

• 6 pieces• with 3 flutes• with straight shank

No. 11989 24.00 € 51.05 €

Countersink Ø mm 6,3 8,3 10,4 12,4 16,5 20,5

Shank Ø mm 5 6 6 8 10 10

Countersink bit and deburrer set 90° HSSNo. 11990 24.00 € 51.05 €

• 5 pieces• with cross hole• with straight shank

Countersink Ø mm 6 10 14 21 28

Shank Ø mm 6 6 8 10 12

for bores mm 1-4 2-5 5-10 10-15 15-20

Counterbore set HSSNo. 11991 49.00 € 76.04 €• 7 pieces• with straight shank• solid dowel pin

for screws mm M3 M4 M5 M6 M8 M10 M12

Shank Ø mm 6 6 6 8 10 12 12

Dowel pin Ø mm 3,2 4,2 5,2 6,2 8,2 10,2 12,2


No. 11805 44.99 € 59.38 €• 3 pieces• Shank Ø 10 mm• Head Ø 14, 18 and 22 mm

Fly cutter set with HSS blade

• carbide-tipped• 9 pieces

Boring bar setsBoring head ISO30-M12with boring bar setNo. 11673 120.00 € 207.06 €• Head Ø 75 mm• Feed accuracy 0,02 mm• Location hole 20 mm• 1 drill sleeve from shank Ø 20 to 12 mm• Boring diameter

max. 120 mm

Shank Ø 10 mm

Shank Ø 12 mm

No. 11670 21.90 € 26.18 €

No. 11671 24.90 € 30.94 €

Tap chuck Original Vertex

• for thread cutting from M4 to M12• Inner taper B16• Head Ø 42 mm - total length 72 mm• for inside thread cutting on machine tools with right- and left-hand operation• the torque is transferred by the square of the tap• the tap is centered by the clamping jaws

No. 11690 59.00 € 90.44 €No. 11686 75.99 € 101.15 €

Circle cutter with bevelled blade

Threading attachment Original Vertex

• for thread cutting from M2 to M8• with morse taper MT2 and flat tang• with key-type drill chuck• automatic forward and reverse motion

No. 11680 129.00 € 184.45 €

Threading attachment

No. 11683 299.00 € 474.81 €• for thread cutting from M5 to M12• MT2 and flat tang• Torque of sliding clutch is 4-fold adjustable• with adjustable safety sliding clutch - protects the tap from breakage• automatic forward and reverse motion• with 2 rubber flex grips

• MT2 and flat tang• Grooving capacity 30 - 300 mm• infinitely variable adjustment of the diameter• with drawing cut, i.e. the cutting motion is performed sloped to the tool for obtaining tear-free edges• Material strength steel up to approx. 5 mm• Drill hole 5 mm


Tap and die set HSS Tap and die set HSSNo. 35411 59.90 € 80.92 €

• 31 pieces• DIN model• Round dies HSS M3-4-5-6-8-10-12• Hand taps HSS M3-4-5-6-8-10-12 • 1 die stock Ø 25 mm• 1 adjustable tap wrench size 1½• 1 screwdriver

No. 35501 79.90 € 117.81 €

• 44 pieces• DIN model• Round dies HSS M3-4-5-6-8-10-12• Hand taps HSS M3-4-5-6-8-10-12 • Die stocks 20x5 - 20x7 - 25x9 - 30x11 - 38x14 mm• Adjustable tap wrenches size 1 and 2• Core hole drills HSS

Ø 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2 mm Screw pitch gauge 24 blades

• 1 screwdriver

Tap and die set HSS

• 30 pieces• 9 round dies M1 - M1.1 - M1.2 - M1.4 - M1.6 - M1.8 - M2 - M2.2 - M2.5• 18 taps M1-M2.5 (2 pieces each)• 1 die stock• 2 holders for clamping the hand taps

No. 35430 39.99 € 59.38 €

Tap wrench with ratchet

• for taps M5 - M12• Square clamping range 4.9 - 7.0 mm - length 110 mm

• 2-jaw clamping chuck for right- and left-hand turn and for rigid use

• All-steel construction - fully chromed• with adjustable t-handle

No. 32707 11.00 € 11.90 €


Tap wrench with ratchet


No. 32626 12.00 € 17.85 €


No. 32622 11.00 € 14.28 €

• 2-jaw clamping chuck for right- and left-hand turn and for rigid use

• All-steel construction - fully chromed• with adjustable t-handle

No. 32702 8.00 € 9.52 €

M1 No. 30090 4.99 € 6.55 €

M1.5 No. 30091 4.99 € 6.55 €

M2.5 No. 30093 4.99 € 6.55 €

Gewindebohrer HSS• high cutting performance• Tap with polished flank angle of 60°• DIN 352• Tolerance 6H• for metric right-hand threads• for through bores

Hand tap sets HSS

• DIN 352 • 3 pieces (taper tap, second tap and plug tap)• high cutting performance• tap with polished flank angle of 60°• tolerance 6H• for metric right-hand threads

for through bores

thread pitch

M3 0.5 mm No. 30103 6.50 € 6.55 €M4 0.7 mm No. 30104 6.50 € 6.55 €M5 0.8 mm No. 30105 6.50 € 6.78 €M6 1.0 mm No. 30106 7.00 € 7.38 €

for pocket hole bores

thread pitch

M8 1.25 mm No. 30108 7.90 € 8.21 €M10 1.50 mm No. 30110 8.50 € 8.93 €M12 1.75 mm No. 30112 11.50 € 13.09 €


Hand reamer set adjustable HSSNo. 13240 129.00 € 178.38 € Length Adjustable range Ø

138 mm 11.90 - 13.49 mm145 mm 13.49 - 15.00 mm163 mm 15.00 - 16.66 mm170 mm 16.66 - 18.25 mm175 mm 18.25 - 19.84 mm185 mm 19.84 - 21.43 mm200 mm 21.43 - 23.81 mm225 mm 23.81 - 27.00 mm250 mm 27.00 - 30.00 mm275 mm 30.00 - 34.10 mm300 mm 34.10 - 38.00 mm

• 11 pieces• with straight shank and square• right-hand cutting• for reaming bores

Dividing attachment Ø 80 mm with 4-jaw lathe chuck Ø 70 mm

included in delivery• Dividing attachment table Ø 80 mm true

running accuracy 0.08 4 T-slots - width of T-slots 6 mm height 45 mm

• 4-jaw lathe chuck Ø 70 mm centrically clamping with turning and drilling jaws

No. 11590 159.90 € 224.91 €

• vertical/horizontal• Table Ø 100 mm• True running accuracy 0.08• Height 55 mm• 4 T-slots - width of T-slots 8 mm• Indexing disks and tailstock

are not available

No. 11500 78.00 € 172.55 €

Dividing attachment Ø 100 mm Dividing attachment Ø 100 mmwith lathe chuck and flange

• Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws• Mounting flange for mounting the lathe chuck on

dividing attachment

with 3-jaw lathe chuck


No. 11525 168.00 € 320.11 €

No. 11513 190.00 € 355.81 €

Single-cut tap sets HSS

• DIN 352• high cutting performance• tap with polished flank angle of 60°• tolerance 6H• for metric right-hand threads

for through bores

thread Pitch

M3 0.5 mm No. 30303 2.60 € 2.62 €M4 0.7 mm No. 30304 2.70 € 2.74 €M5 0.8 mm No. 30305 3.00 € 3.09 €M6 1.0 mm No. 30306 3.20 € 3.21 €

for pocket hole bores

thread Pitch

M8 1.25 mm No. 30308 3.40 € 3.45 €M10 1.50 mm No. 30310 3.80 € 3.81 €M12 1.75 mm No. 30312 4.70 € 4.76 €


Indexing disks for dividing attachmentsNo. 11514 72.00 € 94.01 €

• for dividing attachments with table Ø 110 and 150 mm• for degree and indirect indexingincluded in delivery • 3 indexing disks and indexing crank• Outer Ø 100 mm• Number of bores indexing disk A: 15, 16, 17, 18, 19, 20 indexing disk B: 21, 23, 27, 29, 31, 33 indexing disk C: 37, 39, 41, 43, 47, 49

• vertical/horizontal• Table Ø 110 mm• True running accuracy 0.04• Height 72 mm• 3 slots - width of slots 11 mm

No. 11559 145.00 € 213.01 €

Dividing attachment Ø 110 mm Dividing attachment Ø 110 mmwith lathe chuck and mounting flange• Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws• Mounting flange for mounting the lathe chuck on dividing attachment

Tailstock with height adjustmentNo. 11565 78.00 € 124.95 €• for dividing attachments with table Ø 110 and 150 mm• with center point for supporting long workpieces• Height adjustment from 80-110 mm• Adjustability of center point 15 mm• Basic dimension 130 x 95 mm

Dividing attachment Ø 150 mmwith lathe chuck and mounting flange• Description dividing attachment see no. 11560• Lathe chuck Ø 100 or 125 mm

centrically clamping with turning and drilling jaws

• Mounting flange for mounting the lathe chuck on dividing attachment

No. 11566 245.00 € 348.67 €

Dividing attachment Ø 150 mm with indexing disks


No. 11560 185.00 € 260.61 €

Dividing attachment Ø 150 mm



No. 11557 255.00 € 374.85 €

No. 11558 277.00 € 428.40 €

with 3-jaw lathe chuck Ø 100 mm


No. 11580 276.00 € 428.40 €

No. 11581 296.00 € 452.20 €



No. 11582 304.00 € 487.90 €

No. 11583 326.00 € 492.66 €



No. 11501 215.00 € 332.01 €

Vertex dividing attachment Ø 110 mm Vertex dividing attachments Ø 110 mmwith lathe chuck and mounting flange

• Lathe chuck Ø 80 mm centrically clamping with turning and drilling jaws

• Mounting flange for mounting the lathe chuck on dividing attachment

• Description dividing attachment see no. 11510• Lathe chuck Ø 100 or 125 mm

centrically clamping with turning and drilling jaws

• Mounting flange• for mounting the lathe chuck on dividing attachment• Description indexing disks see no. 11514

Vertex dividing attachment Ø 150 mmwith lathe chuck, mounting flange and indexing disks

Teilscheiben zu TeilapparatNo. 11514 72,00 € 94,01 €

Vertex dividing attachment Ø 150 mmwith lathe chuck and mounting flange• Description dividing attachment see no. 11510• Lathe chuck Ø 100 or 125 mm centrically clamping with turning and drilling jaws• Mounting flange for mounting the lathe chuck on dividing attachment

No. 11518 315.00 € 416.50 €

Vertex dividing attachment Ø 150 mm with indexing disks

• vertical/horizontal• Table Ø 150 mm• True running accuracy 0.02 mm• Height 80 mm• 3 slots - width of slots 11 mm

No. 11510 247.00 € 332.01 €

Vertex dividing attachment Ø 150 mm



No. 11516 323.00 € 493.85 €

No. 11506 345.00 € 547.40 €



No. 11519 357.00 € 505.75 €

No. 11507 377.00 € 529.55 €



No. 11508 385.00 € 565.25 €

No. 11509 407.00 € 570.01 €



No. 11520 429.00 € 583.10 €

No. 11523 449.00 € 606.90 €



No. 11522 457.00 € 642.60 €

No. 11524 479.00 € 647.36 €

All price indications include the currently valid VAT. For foreign customers from the EU member states with valid VAT ID no. as well as from Europeannon -member countries the VAT does not apply. A surchage of 15.00 € must be applied for deliveries to the German islands. Shipments to destinationsoutside of Germany will be delivered to the customer’s door and the actual shipping costs billed to the customer. For deliveries outside of the EU, theapplicable customs clearance costs will be billed additionally. Applicable import duties and taxes will be the customer’s responsibility. All offers arewithout engagement. Our general terms and conditions apply (GTC), available at www.wabeco-rs.de or in the WABECO main catalog.

wabeco-rs.de

Am Blaffertsberg 1342899 RemscheidGermany

Tel. +49 2191 597-0Fax +49 2191 [email protected]

Walter Blombach GmbH

Exhibition dates 2019 | 2020

Heim und Handwerk - Münchenfrom 27.11.2019 to 01.12.2019

Faszination Modellbau - Friedrichshafenfrom 01.11.2019 to 03.11.2019

IHM - Münchenfrom 11.03.2020 to 15.03.2020

Also discover WABECO lathes, drilling and milling machines

Request further information or visit us online at www.wabeco-remscheid.de

THE FUTURE RIGHT NOW

PRECISION lathes, drilling- and milling machines

turning

milling

drilling

or in the current WABECO catalog - we shall be pleased to consult with you personally +49 2191 597-011

WABECO Lathes > D6000

Lathes D6000 hs

Lead screw lathe with prismatic cast iron bed

D6000 hs

Item no. 10606V5,799.00 € | 7,134.05 €

Basic equipment

• 3-jaw lathe chuck Ø 125 mm

• Live center MT2

• Main spindle bore Ø 20 mm (optional Ø 30 mm)

• Thread cutting

with lead screw drive and change gear quadrant

tumbler gear for left- and right-hand threads

change gear set for metric 0.25 - 7.0 mm and

inch 10 - 40 TPI threads 2 automatic longitudinal feed

rates/lead screw drive 0.085 and 0.16 mm/rev

Working range

• Center distance 600 mm

• Center height 135 mm

• Workpiece diameter max. 270 mm

Main drive power

• 2.0 kW, 50 - 5000 rpm

frequency-controlled main drive motor

• extremely silent running

due to modern electronically adjustable drive technology

Prismatic cast iron bed

• made of diagonally ribbed gray cast iron

• inductively hardened and ground guideways

Warranty

• 5 years warranty - the warranty does not cover parts

subject to wear

• Availability of spare parts also guaranteed after warranty

period

precise lead screw lathe

in-house design and production

for metal processing

for single and small-series production

perfect for craft, workshop, industry and

education use due to extreme precision

universal use and operator-friendly

extensive accessories meet the most diverse

customer requirements

further information at www.wabeco-remscheid.de

42

WABECO CNC Milling machines > CC-F1220 hs

42

Documents

SPECIAL PRICES THE WABECO SUMMER PROMOTION · 6 further information at 2-axis coordinate table K400 • Clamping surface 400 x 180 mm • Longitudinal travel X-axis 320 mm • Transverse