Steps in Making A LOGO

1. Open a new Photoshop document.File>>New

Click OK.

2. Go Edit>>Fill

Choose black. Then click OK

3. Open the first image to crop

4. Select Elliptical Marquee Tool

Select part of the imageCtrl + C

5. Go to the blank document

6. Ctrl VAdjust the opacity to 80%.

7. Select the other image

Ctrl + ACtrl + C8. Resize the imageCtrl + t

9.

10. Select the other image

Ctrl + ACtrl + C

11. Resize the imageCtrl + t

12. Select the other image

Ctrl + ACtrl + C

13. Resize the imageCtrl + t

14.

15. Select the pen tool to create a curve text

Pen Tool (P) Click on pen tool, or type 'P', the shortcut.16. Click using your mouse for starting point Start Point A On the image, click on the starting point (A) of your curve. 17. Drag and click for end point End Point B Then click on the desired end point (B). 18. Click in the center for center point

Points in between A straight line connecting your endpoints will be seen. Anywhere on this line, single left click to create an 'Anchor Point', C.19. Hold down Ctrl, click and drag to move the Anchor Point. The line (ACB) will become a curve, whose curvature, depth, etc. can be set by you by moving the Anchor Point while holding down Ctrl. You can add as many Anchor Points as you want and create the curve you had in mind. Create curve

20. Select Horizontal Type Tool

21. Click on the starting point of a curve you just created, on the spot from where you want the text to start.

22. Select the color you want.

23. Final Output.