Upload
vuongkiet
View
214
Download
1
Embed Size (px)
Citation preview
ISO Update
Supplement to ISOfocus January 2015
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered Period from 01 December to 31 December 2014
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 286 Collaborative business relationship management -- Framework
ISO/CD 11000 Collaborative business relationship management — Framework
TC 20 Aircraft and space vehicles
ISO/CD 19683 Space systems — Design qualification and acceptance tests of small-scale satellite and units seeking low-cost and fast-delivery
TC 22 Road vehicles
ISO/CD 11898-2 Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
TC 23 Tractors and machinery for agriculture and forestry
ISO/DTS 19858 Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil lubricity
TC 34 Food products
ISO 2256:1984/CD Amd 1
Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification — Amendment 1
ISO 6571:2008/CD Amd 1
Spices, condiments and herbs — Determination of volatile oil content (hydrodistillation method) — Amendment 1
ISO/DTR 17622 Molecular biomarker analysis — SSR analysis of sunflower
TC 39 Machine tools
ISO/CD 14955-2 Machine tools - Environmental evaluation of machine tools — Part 2: Methods for measuring energy supplied to machine tools and machine tool components
ISO/CD 19085-6 Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (“toupie”)
ISO/CD 19085-7 Woodworking machines — Safety — Part 7: Surface, thicknessing, combined surface/thicknessing planing
machines
TC 58 Gas cylinders
ISO/CD 10156 Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
TC 61 Plastics
ISO/CD 4589-1 Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
ISO/CD 4589-2 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO/CD 4589-3 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
TC 69 Applications of statistical methods
ISO/CD 22514-5 Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 1920-2 Testing of concrete — Part 2: Properties of fresh concrete
TC 92 Fire safety
ISO/CD 12828-2 Validation methods for fire gas analyses — Part 2: Validation of quantification method
TC 94 Personal safety -- Protective clothing and equipment
ISO/CD 11613 Protective clothing for firefighters — Laboratory test methods and performance requirements
ISO/CD 18639-1 PPE ensembles for firefighters undertaking specialist rescue activities — Part 1: General
ISO/CD 18639-2 PPE ensembles for firefighters undertaking specialist rescue activities — Part 2: Compatibility
ISO/CD 18639-3 PPE ensembles for firefighters undertaking specialist rescue activities — Part 3: Clothing
ISO/CD 18639-4 PPE ensembles for firefighters undertaking specialist rescue activities — Part 4: Gloves
ISO/CD 18639-5 PPE ensembles for firefighters undertaking specialist rescue activities — Part 5: Helmet
ISO/CD 18640-1 Protective clothing for fire-fighters- physiological impact — Part 1: Measurement of coupled heat and mass transfer with the sweating TORSO
ISO/CD 18640-2 Protective clothing for fire-fighters- physiological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by fire-fighters
TC 106 Dentistry
ISO 20126:2012/CD Amd 1
Dentistry — Manual toothbrushes — General requirements and test methods — Amendment 1
ISO/DTS 22911 Dentistry — Preclinical evaluation of dental implant systems — Animal test methods
TC 108 Mechanical vibration, shock and condition monitoring
ISO 20283-3:2006/CD Amd 1
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment — Amendment 1
ISO/CD 20283-5 Mechanical vibration — Measurement of vibration on ships — Part 5: Measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
ISO/CD 29821-2 Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation
TC 113 Hydrometry
ISO/CD 9123 Measurement of liquid flow in open channels — Stage-fall-discharge relationships
TC 120 Leather
ISO/CD 15115 Leather — Vocabulary
TC 159 Ergonomics
ISO/CD 9241-11 Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
ISO/CD 9241-112 Ergonomics of human-system interaction — Part 112: Principles and general guidance for the presentation of information
ISO/CD 9241-125 Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information
TC 163 Thermal performance and energy use in the built environment
ISO/CD 52003-1 Energy performance of buildings — Indicators, requirements and certification — Part 1: General aspects and application to the overall energy performance
TC 172 Optics and photonics
ISO/CD 10110-17 Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold
TC 178 Lifts, escalators and moving walks
ISO/DTR 14799-1 Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison
ISO/DTR 14799-2 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
TC 190 Soil quality
ISO/CD TR 19588 Background information and guidance on environmental cyanide analysis
ISO/CD 20131-1 Soil quality — Simple laboratory assessments for characterizing the denitrification in soil — Part 1: Soil denitrifying enzymes activities
ISO/CD 20131-2 Soil quality — Simple laboratory assessments for characterizing the denitrification in soil — Part 2: Assessment of the capacity of soils to reduce N2O
TC 204 Intelligent transport systems
ISO/CD 14817-3 Intelligent transport systems — ITS central data registry and data dictionaries — Part 3: Object identifier assignments for ITS data concepts
ISO/CD 18682 Intelligent transport systems — External hazard detection and notification systems — Basic requirements
ISO/DTR 19639 Electronic fee collection — Investigation of EFC standards for common payment schemes for multi-modal transport services
ISO/CD TR 20545 Intelligent transport systems — Vehicle/roadway warning and control systems — Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems
TC 211 Geographic information/Geomatics
ISO/CD 19160-4 Addressing — Part 4: International postal address components and template languages
TC 219 Floor coverings
ISO/CD 19322 Resilient floor coverings — Specification for floor coverings based on synthetic thermoplastic polymer
TC 228 Tourism and related services
ISO/CD 11121 Recreational diving services — Requirements for introductory training programmes to scuba diving
ISO/CD 24803 Recreational diving services — Requirements for recreational scuba diving service providers
TC 238 Solid biofuels
ISO/CD 18125 Solid biofuels — Determination of calorific value
ISO/CD 18847 Solid biofuels — Determination of particle density
TC 282 Water re-use
ISO/CD 20426 Risk and performance evaluation of water re-use systems — Guidelines for health risk assessment and treatment for water re-use
TC 292 Security (official starting date=2015-01-01)
ISO/DTS 22317 Societal security — Business continuity management systems — Business impact analysis (BIA)
JTC 1 Information technology
ISO/IEC CD 14651 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
ISO/IEC CD 7816-11
Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods
ISO/IEC CD 19286 Identification cards — Integrated circuit cards — ICC protocols and services ensuring privacy
ISO/IEC PDTS 19841
C++ Extensions for Transactional Memory
ISO/IEC CD 30100-2
Information technology — Home network resource management — Part 2:
ISO/IEC CD 10116 Information technology — Security techniques — Modes of operation for an n-bit block cipher
ISO/IEC CD 14888-3
Information technology — Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms
ISO/IEC CD 15946-1
Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 1: General
ISO/IEC CD 18367 Cryptographic algorithms and security mechanisms conformance testing
ISO/IEC CD 20009-4
Information technology — Security techniques — Anonymous entity authentication — Part 4: Mechanisms based on weak secrets
ISO/IEC CD 27003 Information technology — Security techniques — Information security management system implementation guidance
ISO/IEC CD 27004 Information technology — Security techniques — Information security management — Measurement
ISO/IEC 23001-4:2014/PDAM 1
Information technology — MPEG systems technologies — Part 4: Codec configuration representation — Amendment 1: Parser Instantiation from BSD
ISO/IEC 23008-5/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: HEVC Conformance testing and reference software — Amendment 1: Reference software for format range extensions profiles
ISO/IEC 23008-5/PDAM 2
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: HEVC Conformance testing and reference software — Amendment 2: Reference Software for the Multiview Main Profile of HEVC
ISO/IEC 23008-8/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Specification for HEVC — Amendment 1: Conformance testing for Multiview Main and 3D Main Profiles of HEVC
DIS circulated Period from 01 December to 31 December 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 272 Forensic sciences
ISO/DIS 18385.2 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes
2015-03-06
PC 284 Management system for private security operations - Requirements with guidance
ISO/DIS 18788 * Management system for private security operations — Requirements with guidance
2015-03-11
TC 8 Ships and marine technology
ISO/DIS 17939 * Ships and marine technology — Oil tank hatches
ISO/DIS 17940 * Ships and marine technology — Hinged watertight doors
TC 20 Aircraft and space vehicles
ISO/DIS 17761 * Space environment (natural and artificial) — Model of high energy radiation at low altitudes (300-600 km)
2015-03-05
TC 21 Equipment for fire protection and fire fighting
ISO/DIS 14520-1 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
2015-03-09
(Revision of ISO/TS 20885:2003, ISO 14520-1:2006, ISO 14520-1:2006/Cor 1:2007)
TC 22 Road vehicles
ISO/DIS 18246 * Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply
2015-02-18
TC 34 Food products
ISO/DIS 12824 * Royal jelly — Specifications 2015-03-16
ISO 5985:2002/DAmd 1
* Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid — Amendment 1
2015-03-05
ISO/DIS 13904 * Animal feeding stuffs — Determination of tryptophan content 2015-05-05
(Revision of ISO 13904:2005)
TC 35 Paints and varnishes
ISO/DIS 4629-1 * Binders for paints and varnishes — Determination of hydroxyl value — Titrimetric method — Part 1: Titrimetric method without using a catalyst
2015-05-19
(Revision of ISO 4629:1996)
ISO/DIS 4629-2 * Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Titrimetric method using a catalyst
2015-05-19
TC 39 Machine tools
ISO/DIS 3070-2 * Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type)
2015-03-21
(Revision of ISO 3070-2:2007)
TC 43 Acoustics
ISO/DIS 4869-2 * Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
2015-05-05
(Revision of ISO 4869-2:1994, ISO 4869-2:1994/Cor 1:2006)
ISO/DIS 10140-1 * Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products
2015-05-05
(Revision of ISO 10140-1:2010, ISO 10140-1:2010/Amd 1:2012, ISO 10140-1:2010/Amd 2:2014)
TC 44 Welding and allied processes
ISO/DIS 6848.2 Arc welding and cutting — Nonconsumable tungsten electrodes — Classification
2015-02-05
(Revision of ISO 6848:2004)
ISO/DIS 15614-7.2 * Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
2015-01-28
(Revision of ISO 15614-7:2007)
TC 46 Information and documentation
ISO/DIS 7098 * Information and documentation — Romanization of Chinese
(Revision of ISO 7098:1991)
TC 59 Buildings and civil engineering works
ISO/DIS 19861 * Buildings and civil engineering works — Sealants — Determination of curing behavior
ISO/DIS 19862 * Buildings and civil engineering works — Sealants — Durability to extension compression cycling under accelerated weathering
ISO/DIS 19863 * Buildings and civil engineering works — Sealants — Determination of tear resistance
TC 69 Applications of statistical methods
ISO/DIS 22514-4 * Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures
2015-03-09
(Revision of ISO/TR 22514-4:2007)
ISO/DIS 18404 * Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organisation in relation to Six Sigma and Lean implementation
2015-03-11
TC 72 Textile machinery and accessories
ISO/DIS 11111-1 * Textile machinery — Safety requirements — Part 1: Common requirements 2015-05-05
(Revision of ISO 11111-1:2009)
ISO 11111-2:2005/DAmd 2
* Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 2
2015-05-05
ISO 11111-3:2005/DAmd 2
* Textile machinery — Safety requirements — Part 3: Nonwoven machinery — Amendment 2
2015-05-05
ISO 11111-4:2005/DAmd 2
* Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
2015-05-05
ISO 11111-5:2005/DAmd 2
* Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting — Amendment 2
2015-05-05
ISO 11111-6:2005/DAmd 2
* Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery — Amendment 2
2015-05-05
ISO 11111-7:2005/DAmd 2
* Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
2015-05-05
TC 81 Common names for pesticides and other agrochemicals
ISO 1750:1981/DAmd 6
* Pesticides and other agrochemicals — Common names — Amendment 6: Meptyldinocap
TC 83 Sports and other recreational facilities and equipment
ISO/DIS 20187 * Inflatable play equipment — Safety requirements and test methods 2015-03-05
TC 84 Devices for administration of medicinal products and catheters
ISO/DIS 7864 * Sterile hypodermic needles for single use — Requirements and test methods
2015-05-05
(Revision of ISO 7864:1993)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 19017 * Guide for gamma spectrometry measurement of radioactive waste
TC 87 Cork
ISO/DIS 10718 * Cork stoppers — Characterization of a low in germ stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both, being extracted and growing in alcoholic medium
(Revision of ISO 10718:2002)
TC 96 Cranes
ISO/DIS 9926-3 * Cranes — Training of operators — Part 3: Tower cranes 2015-03-05
(Revision of ISO 9926-3:2005)
TC 104 Freight containers
ISO/DIS 9897-5 * Freight containers — Container equipment data exchange (CEDEX) — Part 5: General communication codes for chassis
2015-03-09
(Revision of ISO 9897:1997, ISO 9897:1997/Cor 1:2001)
TC 106 Dentistry
ISO/DIS 18556 * Dentistry — Intraoral spatulas 2015-05-19
TC 108 Mechanical vibration, shock and condition monitoring
ISO 8727:1997/DAmd 1
* Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems — Amendment 1
2015-03-17
TC 110 Industrial trucks
ISO/DIS 10896-6 * Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs
2015-03-09
ISO/DIS 11525-2.2 * Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach trucks
2015-02-11
TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/DIS 8559-2 * Size designation of clothes — Part 2: Primary and secondary dimension indicators
2015-03-21
TC 134 Fertilizers and soil conditioners
ISO/DIS 14820-1 * Fertilizers and liming materials — Sampling and sample preparation — Part 1: Sampling
2015-03-05
ISO/DIS 14820-2 * Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
2015-03-05
ISO/DIS 15604 * Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
2015-03-05
ISO/DIS 15958 * Fertilizers — Extraction of water soluble phosphorus 2015-03-05
ISO/DIS 15959 * Fertilizers — Determination of extracted phosphorus 2015-03-05
ISO/DIS 15960 * Fertilizers — Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates
2015-03-05
ISO/DIS 18642 * Fertilizer and soil conditioners — Fertilizer grade Urea — General requirements
2015-03-23
ISO/DIS 18643 * Fertilizers and soil conditioners — Determination of biuret content of urea-based fertilizers — HPLC method
2015-03-23
ISO/DIS 18644 * Fertilizers and soil conditioners — Controlled release fertilizer — General requirements
2015-03-23
ISO/DIS 18645 * Fertilizers and soil conditioners — Water soluble compound fertilizer — General requirements
2015-03-23
ISO/DIS 25475 * Fertilizers — Determination of ammoniacal nitrogen 2015-03-05
ISO/DIS 25705 * Fertilizers — Determination of urea condensates using high-performance liquid chromatography (HPLC) — Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
2015-03-05
ISO/DIS 25749 * Fertilizers — Determination of sulfates content using three different methods 2015-03-05
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 12572 * Hygrothermal performance of building materials and products — Determination of water vapour transmission properties
2015-05-05
(Revision of ISO 12572:2001)
ISO/DIS 17738-1 * Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems
2015-03-09
TC 172 Optics and photonics
ISO/DIS 14880-1 * Optics and photonics — Microlens arrays — Part 1: Vocabulary 2015-05-05
(Revision of ISO 14880-1:2001, ISO 14880-1:2001/Cor 1:2003, ISO 14880-1:2001/Cor 2:2005)
TC 182 Geotechnics
ISO/DIS 17892-5 * Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test
2015-05-19
(Revision of ISO/TS 17892-5:2004, ISO/TS 17892-5:2004/Cor 1:2006)
ISO/DIS 17892-6 * Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test
2015-05-19
(Revision of ISO/TS 17892-6:2004, ISO/TS 17892-6:2004/Cor 1:2006)
TC 188 Small craft
ISO/DIS 15085 * Small craft — Man-overboard prevention and recovery 2015-05-05
(Revision of ISO 15085:2003, ISO 15085:2003/Amd 1:2009)
TC 190 Soil quality
ISO/DIS 18400-101 * Soil quality — Sampling — Part 101: Framework for the preparation and application of a sampling plan
2015-03-05
ISO/DIS 18400-102 * Soil quality — Sampling — Part 102: Selection and application of sampling techniques
2015-03-05
ISO/DIS 18400-103 * Soil quality — Sampling — Part 103: Safety 2015-03-05
ISO/DIS 18400-105 * Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples
2015-03-05
ISO/DIS 18400-106 * Soil quality — Sampling — Part 106: Quality control and quality assurance 2015-03-05
ISO/DIS 18400-107 * Soil quality — Sampling — Part 107: Recording and reporting 2015-03-05
ISO/DIS 18400-201 * Soil quality — Sampling — Part 201: Physical pretreatment in the field 2015-03-05
TC 204 Intelligent transport systems
ISO/DIS 14813-1.2 * Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services
(Revision of ISO 14813-1:2007)
TC 206 Fine ceramics
ISO/DIS 17841 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate
2015-03-21
TC 219 Floor coverings
ISO/DIS 18168 * Textile floor coverings — Colour fastness to shampooing 2015-03-17
TC 220 Cryogenic vessels
ISO/DIS 21028-2 * Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C
2015-05-19
(Revision of ISO 21028-2:2004)
JTC 1 Information technology
ISO/IEC DIS 29341-12-1
* Information technology — UPnP Device Architecture — Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device
2015-03-05
(Revision of ISO/IEC 29341-12-1:2008)
ISO/IEC DIS 29341-12-2
* Information technology — UPnP Device Architecture — Part 12-2: Remote User Interface Device Control Protocol — Remote User Interface Server Device
2015-03-05
(Revision of ISO/IEC 29341-12-2:2008)
ISO/IEC DIS 29341-3-10
* Information technology — UPnP Device Architecture — Part 3-10: Audio Video Device Control Protocol — Audio Video Transport Service
2015-03-05
(Revision of ISO/IEC 29341-3-10:2008)
ISO/IEC DIS 29341-7-11
* Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Switch Power Service
2015-03-05
(Revision of ISO/IEC 29341-7-11:2008)
ISO/IEC DIS 29341-12-10
* Information technology — UPnP Device Architecture — Part 12-10: Remote User Interface Device Control Protocol — Remote User Interface Client Service
2015-03-05
(Revision of ISO/IEC 29341-12-10:2008)
ISO/IEC DIS 29341-12-11
* Information technology — UPnP Device Architecture — Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service
2015-03-05
(Revision of ISO/IEC 29341-12-11:2008)
ISO/IEC DIS 15026-3 * Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
2015-03-21
(Revision of ISO/IEC 15026-3:2011)
ISO/IEC DIS 7816-15 * Identification cards — Integrated circuit cards — Part 15: Cryptographic information application
(Revision of ISO/IEC 7816-15:2004, ISO/IEC 7816-15:2004/Amd 1:2007,
ISO/IEC 7816-15:2004/Cor 1:2004, ISO/IEC 7816-15:2004/Amd 2:2008)
ISO/IEC DIS 11694-3 * Identification cards — Optical memory cards — Linear recording method — Part 3: Optical properties and characteristics
(Revision of ISO/IEC 11694-3:2008)
ISO/IEC DIS 17825 * Information technology — Security technique — Testing methods for the mtigation of non-invasive attack classes against cryptographic modules
ISO/IEC 14496-5:2001/DAmd 36
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software
2015-03-17
ISO/IEC 14496-27:2009/DAmd 6
* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 6: Pattern-based 3D mesh coding conformance
2015-03-17
ISO/IEC DIS 19757-3 * Information technology — Document Schema Definition Languages (DSDL) — Part 3: Rule-based validation — Schematron
(Revision of ISO/IEC 19757-3:2006)
ISO/IEC DIS 30106-1 * Information technology — BioAPI for object oriented programming languages — Part 1: Architecture
2015-03-05
ISO/IEC DIS 30106-2 * Information Technology — Object oriented BioAPI — Part 2: Java implementation
2015-03-05
ISO/IEC DIS 30106-3 * Information Technology — Object oriented BioAPI — Part 3: C# implementation
2015-03-05
FDIS circulated Period from 01 December to 31 December 2014
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/FDIS 16260 * Paper and board — Determination of internal bond strength 2015-02-17
TC 22 Road vehicles
ISO/FDIS 15118-3 * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements
2015-02-06
TC 24 Particle characterization including sieving
ISO/FDIS 17867 * Particle size analysis — Small-angle X-ray scattering 2015-02-10
TC 27 Solid mineral fuels
ISO/FDIS 602 * Coal — Determination of mineral matter 2015-02-10
(Revision of ISO 602:1983)
TC 28 Petroleum products and related products of synthetic or biological origin
ISO/FDIS 16861 * Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)
TC 37 Terminology and other language and content resources
ISO/FDIS 17100 * Translation Services — Requirements for translation services 2015-02-19
TC 44 Welding and allied processes
ISO 2503:2009/FDAmd 1
* Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
2015-02-05
ISO 5172:2006/FDAmd 2
* Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests — Amendment 2
2015-02-05
ISO 7291:2010/FDAmd 1
* Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) — Amendment 1
2015-02-05
TC 58 Gas cylinders
ISO 13341:2010/FDAmd 1
* Gas cylinders — Fitting of valves to gas cylinders — Amendment 1 2015-02-12
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/FDIS 15551-1 * Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift
2015-02-05
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/FDIS 18319 * Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Specifications of FRP sheets
2015-02-18
TC 94 Personal safety -- Protective clothing and equipment
ISO/FDIS 11611 * Protective clothing for use in welding and allied processes 2015-02-19
(Revision of ISO 11611:2007)
ISO/FDIS 14116 * Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing
2015-02-19
(Revision of ISO 14116:2008, ISO 14116:2008/Cor 1:2009)
ISO/FDIS 16900-8 * Respiratory protective devices — Methods of test and test equipment — 2015-02-16
Part 8: Measurement of RPD air flow rates of assisted filtering RPD
TC 96 Cranes
ISO/FDIS 9942-1 * Cranes — Information labels — Part 1: General 2015-02-17
(Revision of ISO 9942-1:1994)
TC 134 Fertilizers and soil conditioners
ISO/FDIS 17322 * Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU)
2015-02-18
ISO/FDIS 17323 * Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements
2015-02-18
TC 135 Non-destructive testing
ISO/FDIS 18490 * Non-destructive testing — Evaluation of vision acuity of NDT personnel 2015-02-12
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 18851 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
2015-02-03
TC 150 Implants for surgery
ISO/FDIS 16061 * Instrumentation for use in association with non-active surgical implants — General requirements
2015-02-12
(Revision of ISO 16061:2008)
TC 172 Optics and photonics
ISO/FDIS 16971 * Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye
2015-02-09
TC 188 Small craft
ISO 10240:2004/FDAmd 1
* Small craft — Owner's manual — Amendment 1 2015-02-12
ISO/FDIS 18854 * Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
2015-02-19
TC 210 Quality management and corresponding general aspects for medical devices
IEC/FDIS 62366-1 Medical devices — Part 1: Application of usability engineering to medical devices
2015-01-31
(Revision of IEC 62366:2007, IEC 62366:2007/Amd 1:2014)
ISO/FDIS 80369-20 * Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
2015-02-05
TC 213 Dimensional and geometrical product specifications and verification
ISO/FDIS 16610-60 * Geometrical Product Specification (GPS) — Filtration — Part 60: Linear areal filters — Basic concepts
2015-02-12
TC 216 Footwear
ISO/FDIS 10750 * Footwear — Test method for slide fasteners — Attachment strength of end stops
2015-02-05
TC 226 Materials for the production of primary aluminium
ISO/FDIS 15379-1 * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure
2015-02-18
(Revision of ISO 15379-1:2004)
ISO/FDIS 15379-2 * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expansion due to sodium penetration without application of pressure
2015-02-18
(Revision of ISO 15379-2:2004)
JTC 1 Information technology
ISO/IEC 14496-5:2001/FDAmd 33
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 33: Reference software for MVC plus depth extension of AVC
2015-02-03
ISO/IEC FDIS 23008-2 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding
2015-02-09
(Revision of ISO/IEC 23008-2:2013)
ISO/IEC FDIS 23008-10
* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 10: MPEG Media Transport Forward Error Correction (FEC) codes
2015-02-09