Supplement to ISO Focus - tsinfo.js.cn · ISO/CD 15614-14 Specification and ... ISO Update, Supplement to ISO Focus -- October 2010 3 TC 35 Paints and varnishes ... (Revision of ISO/TS

ISO Update

Supplement to ISO Focus+

October 2010

International Standards in processfrom 25 August to 30 September 2010

Committee Drafts (CD) registered 1

Draft International Standards (DIS) circulated 2

Final draft International Standards (FDIS) circulated 5

Standards published 9

Standards confi rmed 16

Standards withdrawn 16

Meeting calendar 18

People and places

ISO Members 26

ISO Update, Supplement to ISO Focus -- October 2010 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 25 August to 30 September 2010

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 8 Ships and marine technology

ISO/CD 11711-1

Ships and marine technology — Piping and machinery — Ballast water management sys-tems — Part 1: Discharge sampling apparatus

ISO/CD 614 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing

ISO/CD 1751 Ships and marine technology — Ships'side scuttles

ISO/CD 3434 Shipbuilding and marine structures — Heated glass panes for ships' rectangular windows

ISO/CD 3903 Ships and marine technology — Ships' ordi-nary rectangular windows

ISO/CD 21005 Ships and marine technology — Thermally toughened safety-glass panes for windows and side scuttles

TC 20 Aircraft and space vehicles

ISO/CD 12208 Space systems — Observed Proton Fluences over long duration at GEO and Guideline for selection of confidence level in statistical model of Solar Proton Fluences

TC 22 Road vehicles

ISO/CD 4164 Road vehicles — Mopeds — Engine test code — Net power

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 5718 Harvesting equipment — Blades for agricultural rotary mowers — Requirements

TC 44 Welding and allied processes

ISO/CD 15614-14

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys

ISO/CD 9455-10

Soft soldering fluxes — Test methods — Part 10: Flux efficacy tests, solder spread method

ISO/CD 9455-16

Soft soldering fluxes — Test methods — Part 16: Flux efficacy tests, wetting balance method

TC 79 Light metals and their alloys

ISO/CD 13092 Titanium and titanium alloys — Titanium sponge

TC 84 Devices for administration of medicinal products and intravascular catheters

ISO/CD 10555-3

Sterile, single-use intravascular catheters — Part 3: Central venous catheters

ISO/CD 10555-4

Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters

ISO/CD 10555-5

Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 19238 Radiation protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics

ISO/CD 16117 Nuclear criticality safety — Criticality accident fission numbers estimates

TC 113 Hydrometry

ISO/CD 4377 Hydrometric determinations — Flow measure-ment in open channels using structures — Flat-V weirs

TC 114 Horology

ISO/CD 13074 Analogue quartz clocks — Fitting dimensions of movements to hands

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 16422 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

TC 163 Thermal performance and energy use in the built environment

ISO/CD 13788 Hygrothermal performance of building compo-nents and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods

TC 172 Optics and photonics

ISO/CD TR 21254-4

Lasers and laser-related equipment — Deter-mination of laser-induced damage threshold of optical surfaces — Part 4: Inspection, detec-tion and measurement

TC 193 Natural gas

ISO/CD 13734 Natural gas — Organic components used as odorants — Requirements and test methods

TC 206 Fine ceramics

ISO/CD 23145-2

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Un-tapped density

TC 229 Nanotechnologies

ISO/DTS 80004-5

Nanotechnologies — Vocabulary — Part 5: Nano/bio interface

ISO/DTS 80004-7

Nanotechnologies — Vocabulary — Part 7: Diagnostics and therapeutics for healthcare

JTC 1 Information technology

ISO/IEC 14496-16/CD Amd 1

Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 1: Efficient representation of 3D meshes with multiple attributes

2 ISO Update, Supplement to ISO Focus -- October 2010

ISO/IEC CD 24800-6

Information technology — JPSearch — Part 6: Reference software

ISO/IEC CD 19788-6

Information technology — Learning, education and training — Metadata for learning resources — Part 6: Availability, distribution, and intel-lectual property elements

ISO/IEC CD 29120-2

Information technology — Machine Readable Test Data for biometric testing and reporting — Part 2: Test Input Data

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates


ISO 28004:2007/DAmd 1

* Security management systems for the supply chain — Guide-lines for the implementation of ISO 28000 — Amendment 1: Medium and small ports

2011-02-02

ISO 28004:2007/DAmd 3

* Security management systems for the supply chain — Guide-lines for the implementation of ISO 28000 — Amendment 3: Additional specific guidance if compliance with ISO 28001 is a management objective

2011-02-02

TC 10 Technical product documentation

ISO/DIS 128-15

* Technical product documenta-tion (TPD) — General principles of presentation — Part 15: Pres-entation of shipbuilding drawings

2011-03-02

ISO/DIS 129-4 * Technical product documenta-tion (TPD) — Indication of di-mensions and tolerances — Part 4: Dimensioning for shipbuilding drawings

2011-03-02

TC 17 Steel

ISO/DIS 13887 Cold-reduced steel sheet of higher yield strength with im-proved formability

2011-03-02

(Revision of ISO 13887:2004)


ISO/DIS 11532 * Aircraft ground equipment — Graphical symbols

2011-02-11

ISO/DIS 10502 * Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specification

2011-02-03


ISO/DIS 14721 * Space data and information transfer systems — Open archi-val information system (OAIS) — Reference model

2011-02-14


ISO/DIS 16363 * Space data and information transfer systems - Audit and certification of trustworthy digital repositories

2011-02-22

ISO/DIS 10789 * Space systems — Programme management — Information and documentation management

2011-02-22

ISO/DIS 26900 Space data and information transfer systems — Orbit data messages

2011-02-22


TC 22 Road vehicles

ISO/DIS 8820-8

* Road vehicles — Fuse-links — Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V

2011-02-03

ISO/DIS 11452-9.2

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters

2010-11-09

ISO/DIS 13207-1

* Road vehicles — LED lamp char-acteristics for bulb compatible failure detection — Part 1: LED lamps used for direction indica-tor and stop lamps

2011-02-03

ISO/DIS 13400-1

* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 1: Gen-eral information and use case definition

2011-02-14

ISO/DIS 13400-2

* Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Net-work and transport layer require-ments and services

2011-02-14

ISO/DIS 13400-3

* Road vehicles — Diagnostic communication over Inter-net Protocol (DoIP) — Part 3: IEEE802.3 based wired vehicle interface

2011-02-14

ISO/DIS 27145-4

* Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment

2011-02-14

(Revision of ISO/PAS 27145-4:2006)

TC 31 Tyres, rims and valves

ISO 4251-2:2005/DAmd 1

* Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings — Amendment 1

2011-02-08

TC 33 Refractories

ISO/DIS 14719 * Chemical analysis of refractory material glass and glazes — De-termination of Fe2+ and Fe3+ by the spectral photometric method with 1-10 phenantroline

2011-01-27

TC 34 Food products

ISO/DIS 11746 * Rice — Determination of biomet-ric characteristics of kernels

2011-01-27

ISO/DIS 8586 * Sensory analysis — General guidance for the selection, train-ing and monitoring of selected and expert assessors

2011-02-22

(Revision of ISO 8586-1:1993, ISO 8586-2:2008)


TC 35 Paints and varnishes

ISO/DIS 2812-3

* Paints and varnishes — Deter-mination of resistance to liquids — Part 3: Method using an absorbent medium

2011-02-10

(Revision of ISO 2812-3:2007)

ISO/DIS 9117-4

* Paints and varnishes — Dry-ing tests — Part 4: Test using a mechanical recorder

2011-02-10

ISO/DIS 9117-5

* Paints and varnishes — Dry-ing tests — Part 5: Modified Bandow-Wolff test

2011-02-10

TC 43 Acoustics

ISO 10140-1:2010/DAmd 1

* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 1: Ap-plication rules for specific prod-ucts — Amendment 1: Guideline for the determination of the sound reduction index of joints filled with fillers and or seals

2011-02-17


ISO/DIS 13585.2

* Brazing — Brazer qualification 2010-12-01

TC 45 Rubber and rubber products

ISO/DIS 10619-1.2

* Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature

2010-11-10

(Revision of ISO 1746:1998, ISO 1746:1998/Cor 1:1999)

ISO/DIS 10619-2.2

* Rubber and plastics hoses and tubing — Measurement of flex-ibility and stiffness — Part 2: Bending tests at sub-ambient temperatures

2010-11-17


ISO/DIS 10619-3.2

* Rubber and plastics hoses and tubing — Measurement of flex-ibility and stiffness — Part 3: Bending tests at high and low temperatures

2010-11-10

ISO/DIS 5794-3

* Rubber compounding ingre-dients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a mixed solution of styrene-butadiene rubber and butadiene rubber

2011-02-25

ISO/DIS 8332 * Rubber compounding ingredi-ents — Sulfur — Methods of test

2011-01-28


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 13085 Petroleum and natural gas indus-tries — Aluminium alloy pipe for use as tubing for wells

2011-03-02

ISO/DIS 27627 Petroleum and natural gas indus-tries — Aluminium alloy drill pipe thread connection gauging

2011-03-02

TC 68 Financial services

ISO/DIS 20022-1

* Financial services — Univer-sal financial industry message scheme — Part 1: Metamodel

2011-01-31


ISO/DIS 20022-2

* Financial services — Univer-sal financial industry message scheme — Part 2: UML profile

2011-01-31


ISO/DIS 20022-3

* Financial services — Univer-sal financial industry message scheme — Part 3: Modelling

2011-01-31

(Revision of ISO/TS 20022-3:2004)

ISO/DIS 20022-4

* Financial services — Univer-sal financial industry message scheme — Part 4: XML Schema generation

2011-01-31


ISO/DIS 20022-5

* Financial services — Univer-sal financial industry message scheme — Part 5: Reverse engineering

2011-01-31


ISO/DIS 20022-7

* Financial services — Univer-sal financial industry message scheme — Part 7: Registration

2011-01-31

ISO/DIS 20022-8

* Financial services — Univer-sal financial industry mes-sage scheme — Part 8: ASN.1 generation

2011-01-31

TC 86 Refrigeration and air-conditioning

ISO/DIS 13971 * Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metal-lic tubes — Requirements and classification

2011-02-01

TC 92 Fire safety

ISO 834-1:1999/DAmd 1

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1

2011-03-02

TC 102 Iron ore and direct reduced iron

ISO/DIS 3087 * Iron ores — Determination of the moisture content of a lot

2011-02-08


TC 106 Dentistry

ISO/DIS 6876 * Dentistry — Root canal sealing materials

2011-01-27


TC 108 Mechanical vibration, shock and condition monitoring

ISO/DIS 21940-14

* Mechanical vibration — Rotor balancing — Part 14: Balance quality requirements of rigid and flexible rotors — Balance errors

2011-02-04


ISO/DIS 21940-23

* Mechanical vibration — Rotor balancing — Part 23: Balancing machines — Enclosures and other protective measures for the measuring station

2011-02-04



TC 111 Round steel link chains, chain slings, components and accessories

ISO/DIS 3076 * Round steel short link chains for general lifting purposes — Me-dium tolerance sling chains for chain slings — Grade 8

2011-02-07


TC 121 Anaesthetic and respiratory equipment

ISO 10524-3:2005/DAmd 1

* Pressure regulators for use with medical gases — Part 3: Pres-sure regulators integrated with cylinder valves — Amendment 1

2011-02-17

TC 135 Non-destructive testing

ISO/DIS 12707 * Non-destructive testing — Terminology — Terms used in magnetic particle testing

2011-01-26

TC 146 Air quality

ISO/DIS 16000-26

* Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)

2011-01-27

TC 147 Water quality

ISO/DIS 14380 * Water quality — Determination of the acute toxicity to Thamno-cephalus platyurus (Crustacea, Anostraca)

2011-02-03

TC 159 Ergonomics

ISO 9241-410:2008/DAmd 1

* Ergonomics of human-system interaction — Part 410: Design criteria for physical input devices — Amendment 1

2011-02-24

TC 194 Biological evaluation of medical devices

ISO/DIS 13022 * Medical products containing viable human cells — Application of risk management and require-ments for processing practices

2011-03-02

TC 201 Surface chemical analysis

ISO/DIS 14701 * Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness

2011-02-08

TC 210 Quality management and corresponding general as-pects for medical devices

ISO/IEC DGuide 63

* Guide to the development and inclusion of safety aspects in International Standards for medi-cal devices

2011-01-04

(Revision of ISO/IEC Guide 63:1999)

TC 211 Geographic information/Geomatics

ISO/DIS 19145 * Geographic information — Registry of representations of geographic point location

2011-02-03

TC 215 Health informatics

ISO/DIS 11238 * Health Informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated informa-tion on substances

2011-02-24

ISO/DIS 11239 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated informa-tion on pharmaceutical dose forms, units of presentation and routes of administration

2011-02-24

ISO/DIS 11240 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and ex-change of units of measurement

2011-02-24

ISO/DIS 11615 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated medicinal product information

2011-02-24

ISO/DIS 11616 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for unique identification and exchange of regulated pharma-ceutical product information

2011-02-24

TC 219 Floor coverings

ISO/DIS 10575.2

* Resilient floor coverings — Specification for rubber sheet floor coverings with backing

2010-11-15

ISO/DIS 10577.2

* Resilient floor coverings — Specification for rubber sheet floor coverings without backing

2010-11-15


ISO/DIS 12025 * Nanomaterials — Quantifica-tion of nano-object release from powders by generation of aerosols

2011-03-02

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/DIS 2419 * Leather — Physical and mechan-ical tests — Sample preparation and conditioning

2011-01-27


ISO/DIS 17076-1

* Leather — Determination of abrasion resistance — Part 1: Taber method

2011-01-27


ISO/DIS 26082-1

* Leather — Physical and me-chanical test method for the determination of soiling — Part 1: Rubbing (Martindale) method

2011-01-27



FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 2 Fasteners

ISO/FDIS 4014 * Hexagon head bolts — Product grades A and B

2010-12-01


ISO/FDIS 4016 * Hexagon head bolts — Product grade C

2010-12-01


ISO/FDIS 4017 * Hexagon head screws — Prod-uct grades A and B

2010-12-01


ISO/FDIS 4018 * Hexagon head screws — Prod-uct grade C

2010-12-01


ISO/FDIS 7048 * Cross-recessed cheese head screws

2010-12-01


ISO/FDIS 8676 * Hexagon head screws with met-ric fine pitch thread — Product grades A and B

2010-12-01


ISO/FDIS 8765 * Hexagon head bolts with metric fine pitch thread — Product grades A and B

2010-12-01


ISO/FDIS 10510

* Tapping screw and washer as-semblies with plain washers

2010-11-17


ISO/FDIS 14579

* Hexalobular socket head cap screws

2010-12-01


ISO/FDIS 14580

* Hexalobular socket cheese head screws

2010-12-01


ISO/FDIS 14583

* Hexalobular socket pan head screws

2010-12-01


ISO/FDIS 14584

* Hexalobular socket raised coun-tersunk head screws

2010-12-01


ISO/FDIS 14585

* Hexalobular socket pan head tapping screws

2010-11-17


ISO/FDIS 14586

* Hexalobular socket countersunk head tapping screws

2010-11-17


ISO/FDIS 14587

* Hexalobular socket raised countersunk (oval) head tapping screws

2010-11-17


ISO/FDIS 15071

* Hexagon bolts with flange — Small series — Product grade A

2010-11-25


TC 4 Rolling bearings

ISO/FDIS 5753-2

* Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings

2010-11-09

TC 6 Paper, board and pulps

ISO/FDIS 12625-8

* Tissue paper and tissue prod-ucts — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method

2010-11-17


TC 17 Steel

ISO/FDIS 15510

* Stainless steels — Chemical composition

2010-10-28

(Revision of ISO/TS 15510:2003)

ISO/FDIS 10893-1

* Non-destructive testing of steel tubes — Part 1: Automated elec-tromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktight-ness instead of the hydrostatic test

2010-11-10


ISO/FDIS 10893-2

* Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections

2010-11-10


ISO/FDIS 10893-3

* Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage test-ing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and transverse imperfections

2010-11-10

(Revision of ISO 9402:1989, ISO 9598:1989)

ISO/FDIS 10893-4

* Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detec-tion of surface imperfections

2010-11-10


ISO/FDIS 10893-5

* Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

2010-11-10


ISO/FDIS 10893-6

* Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detec-tion of imperfections

2010-11-10


ISO/FDIS 10893-7

* Non-destructive testing of steel tubes — Part 7: Digital radio-graphic testing of the weld seam of welded steel tubes for the detection of imperfections

2010-11-10

ISO/FDIS 10893-8

* Non-destructive testing of steel tubes — Part 8: Automated ultra-sonic testing of seamless and welded steel tubes for the detec-tion of laminar imperfections

2010-11-10


(Revision of ISO 10124:1994, ISO 11496:1993, ISO 13663:1995)

ISO/FDIS 10893-9

* Non-destructive testing of steel tubes — Part 9: Automated ultra-sonic testing for the detection of laminar imperfections in strips/plates used for the manufacture of welded steel tubes

2010-11-10


ISO/FDIS 10893-10

* Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic test-ing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and transverse imperfections

2010-11-10


ISO/FDIS 10893-11

* Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and transverse imperfections

2010-11-10


ISO/FDIS 10893-12

* Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

2010-11-10


TC 21 Equipment for fire protec-tion and fire fighting

ISO/FDIS 7240-3

* Fire detection and alarm systems — Part 3: Audible alarm devices

2010-11-15

ISO/FDIS 12239

* Smoke alarms using scat-tered light, transmitted light or ionization

2010-11-16


TC 22 Road vehicles

ISO/FDIS 7116 * Mopeds — Measurement method for determining maxi-mum speed

2010-11-29



ISO/FDIS 4254-11

* Agricultural machinery — Safety — Part 11: Pick-up balers

2010-11-17

TC 27 Solid mineral fuels

ISO/FDIS 23873

* Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer

2010-10-26

TC 28 Petroleum products and lubricants

ISO/FDIS 3405 * Petroleum products — Determi-nation of distillation characteris-tics at atmospheric pressure

2010-12-01


ISO/FDIS 16591

* Petroleum products — Determi-nation of sulfur content — Oxi-dative microcoulometry method

2010-11-10

ISO/FDIS 20783-1

* Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE

2010-12-10


ISO/FDIS 20843

* Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC

2010-12-03



ISO/FDIS 18274

* Welding consumables — Wire and strip electrodes, wires and rods for fusion weld-ing of nickel and nickel alloys — Classification

2010-11-17

(Revision of ISO 18274:2004, ISO 18274:2004/Cor 1:2005, ISO 18274:2004/Cor 2:2006)

ISO/FDIS 11666.2

* Non-destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels

2010-11-17

ISO/FDIS 17640.2

* Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment

2010-10-27



ISO/FDIS 32100

* Rubber- or plastics-coated fabrics — Physical and mechani-cal tests — Determination of flex resistance by the flexometer method

2010-11-10

TC 46 Information and documentation

ISO/FDIS 26324

* Information and documentation — Digital object identifier system

2010-11-16

ISO/FDIS 16175-1

* Information and documenta-tion — Principles and func-tional requirements for records in electronic office environments — Part 1: Overview and statement of principles

2010-11-16

ISO/FDIS 16175-3

* Information and documenta-tion — Principles and func-tional requirements for records in electronic office environments — Part 3: Guidelines and functional requirements for records in busi-ness systems

2010-11-16

TC 58 Gas cylinders

ISO/FDIS 11114-3

* Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere

2010-11-17


TC 61 Plastics

ISO/FDIS 178 * Plastics — Determination of flexural properties

2010-11-17

(Revision of ISO 178:2001, ISO 178:2001/Amd 1:2004)

ISO/FDIS 11337

* Plastics — Polyamides — De-termination of e-caprolactam and w-laurolactam by gas chromatography

2010-11-10


ISO/FDIS 4611 * Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

2010-11-17



ISO/FDIS 15064

* Plastics — Aromatic isocy-anates for use in the production of polyurethanes — Determi-nation of the isomer ratio in toluenediisocyanate

2010-11-17


ISO/FDIS 3343 * Reinforcement yarns — Determi-nation of twist balance index

2010-11-29


ISO/FDIS 4602 * Reinforcements — Woven fab-rics — Determination of number of yarns per unit length of warp and weft

2010-11-29


ISO/FDIS 10352

* Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area

2010-11-10


ISO 14125:1998/FDAmd 1

* Fibre-reinforced plastic compos-ites — Determination of flexural properties — Amendment 1

2010-12-01

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 28460

* Petroleum and natural gas indus-tries — Installation and equip-ment for liquefied natural gas — Ship-to-shore interface and port operations

2010-11-10

ISO/FDIS 13628-4

* Petroleum and natural gas indus-tries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment

2010-11-17


ISO/FDIS 11960

* Petroleum and natural gas indus-tries — Steel pipes for use as casing or tubing for wells

2010-11-17


ISO/FDIS 13678

* Petroleum and natural gas indus-tries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements

2010-11-14


ISO/FDIS 19906

* Petroleum and natural gas indus-tries — Arctic offshore structures

2010-11-17

TC 92 Fire safety

ISO/FDIS 29473

* Fire tests — Uncertainty of measurements in fire tests

2010-11-08

TC 106 Dentistry

ISO/FDIS 27020

* Dentistry — Brackets and tubes for use in orthodontics

2010-11-17

TC 107 Metallic and other inorgan-ic coatings

ISO/FDIS 3613 * Metallic and other inorganic coatings — Chromate conver-sion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods

2010-11-03


ISO/FDIS 4534 * Vitreous and porcelain enam-els — Determination of fluidity behaviour — Fusion flow test

2010-11-17


ISO/FDIS 12690

* Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities

2010-11-17

ISO/FDIS 14921

* Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components

2010-11-10


ISO/FDIS 9717 * Metallic and other inorganic coatings — Phosphate conver-sion coating of metals

2010-11-17


TC 110 Industrial trucks

ISO/FDIS 22915-14

* Industrial trucks — Verification of stability — Part 14: Rough-terrain variable-reach trucks

2010-11-16

(Revision of ISO 8379:1998, ISO 8379:1998/Amd 1:2001)

TC 117 Fans

ISO/FDIS 12759

* Fans — Efficiency classification for fans

2010-11-16

ISO 13347-1:2004/FDAmd 1

* Industrial fans — Determination of fan sound power levels under standardized laboratory condi-tions — Part 1: General overview — Amendment 1

2010-10-28

ISO 13347-3:2004/FDAmd 1

* Industrial fans — Determina-tion of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — Amend-ment 1

2010-10-28

TC 118 Compressors and pneu-matic tools, machines and equipment

ISO/FDIS 28927-4

* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders

2010-11-17


TC 119 Powder metallurgy

ISO/FDIS 3927 * Metallic powders, excluding powders for hardmetals — De-termination of compressibility in uniaxial compression

2010-12-10


ISO/FDIS 3953 * Metallic powders — Determina-tion of tap density

2010-12-01


TC 122 Packaging

ISO/FDIS 22742

* Packaging — Linear bar code and two-dimensional symbols for product packaging

2010-10-27



ISO/FDIS 14531-3

* Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the convey-ance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

2010-11-08



TC 145 Graphical symbols

ISO 7010:2003/FDAmd 71

* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 71: Safety sign P025: Do not use this incomplete scaffold

2010-11-03

ISO 7010:2003/FDAmd 72

* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 72: Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir

2010-11-03

ISO 7010:2003/FDAmd 73

* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 73: Safety sign P027: Do not use this lift for people

2010-11-03

ISO 7010:2003/FDAmd 74

* Graphical symbols — Safety col-ours and safety signs — Safety signs used in workplaces and public areas — Amendment 74: Safety sign P028: Do not wear gloves

2010-11-03

TC 146 Air quality

ISO/FDIS 11771

* Air quality — Determination of time-averaged mass emissions and emission factors — General approach

2010-10-27


ISO/FDIS 9698 * Water quality — Determination of tritium activity concentration — Liquid scintillation counting method

2010-11-17


TC 157 Non-systemic contra-ceptives and STI barrier prophylactics

ISO/FDIS 29941

* Condoms — Determination of nitrosamines migrating from natural rubber latex condoms

2010-11-04

TC 159 Ergonomics

ISO/FDIS 24501

* Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products

2010-11-17

ISO/FDIS 24502

* Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light

2010-11-17

TC 160 Glass in building

ISO/FDIS 28278-2

* Glass in building — Glass prod-ucts for structural sealant glazing — Part 2: Assembly rules

2010-11-17


ISO/FDIS 8624 * Ophthalmic optics — Spectacle frames — Measuring system and terminology

2010-12-01



ISO/FDIS 14155

* Clinical investigation of medical devices for human subjects — Good clinical practice

2010-11-10

(Revision of ISO 14155-1:2003, ISO 14155-2:2003)

TC 204 Intelligent transport systems

ISO/FDIS 17573

* Electronic fee collection — Sys-tems architecture for vehicle-related tolling

2010-11-17


ISO/FDIS 21216

* Intelligent transport systems — Wireless communications — CALM using millimetre commu-nications — Air interface

2010-10-27

TC 207 Environmental management

ISO/FDIS 14005

* Environmental management systems — Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

2010-10-27

TC 210 Quality management and corresponding general as-pects for medical devices

ISO/FDIS 80369-1

* Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements

2010-11-17


ISO/FDIS 19142

* Geographic information — Web Feature Service

2010-11-17

TC 215 Health informatics

ISO/FDIS 21667

* Health informatics — Health indi-cators conceptual framework

2010-11-03


TC 216 Footwear

ISO/FDIS 10717

* Footwear — Test method for slide fasteners — Burst strength

2010-10-27

ISO/FDIS 10748

* Footwear — Test method for slide fasteners — Slider locking strength

2010-12-01


ISO/FDIS 10801

* Nanotechnologies — Genera-tion of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method

2010-11-17

ISO/FDIS 10808

* Nanotechnologies — Charac-terization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing

2010-11-10

CASCO Committee on conformity assessment

ISO/IEC FDIS 17021

* Conformity assessment — Re-quirements for bodies providing audit and certification of man-agement systems

2010-11-17

(Revision of ISO/IEC 17021:2006, ISO/IEC DIS 17021-2)


ISO/IEC FDISP 29110-2

* Software engineering — Lifecy-cle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy

2010-11-07

ISO/IEC FDISP 29110-4-1

* Software engineering — Lifecy-cle profiles for Very Small Entities (VSEs) — Part 4-1: Profile speci-fications: Generic profile group

2010-11-07


ISO/IEC FDIS 24787

* Information technology — Iden-tification cards — On-card biometric comparison

2010-11-16

ISO/IEC FDIS 9796-2

* Information technology — Se-curity techniques — Digital signature schemes giving mes-sage recovery — Part 2: Integer factorization based mechanisms

2010-11-11

(Revision of ISO/IEC 9796-2:2002, ISO/IEC 9796-2:2002/Amd 1:2008)

ISO/IEC FDIS 27033-3

* Information technology — Se-curity techniques — Network security — Part 3: Reference networking scenarios — Threats, design techniques and control issues

2010-11-11

ISO/IEC 14496-22:2009/FDIS Amd 1

* Information technology — Cod-ing of audio-visual objects — Part 22: Open Font Format — Amendment 1: Support for many-to-one range mappings

2010-11-16


* Information technology — MPEG extensible middleware (MXM) — Part 4: MXM protocols

2010-11-04

(Revision of ISO/IEC 29116-1:2008)


* Information technology — JP-Search — Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)

2010-11-04


* Information technology — Conformance testing for the biometric application program-ming interface (BioAPI) — Part 3: Test assertions for BioAPI frameworks

2010-10-26

Standards published

New International Standards published between 25 August and 30 September 2010


** French version of standard previously published in English only

Price group

TC 2 Fasteners

ISO 225:2010 * Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions

U

ISO 12474:2010

Hexagon socket head cap screws with metric fine pitch thread

D

TC 6 Paper, board and pulps

ISO 16532-3:2010

Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and grease-proof papers

D


ISO/PAS 28002:2010

* Security management systems for the supply chain - Development of resil-ience in the supply chain - Require-ments with guidance for use

U

TC 10 Technical product documentation

ISO 11005:2010

* Technical product documentation — Use of main documents

D

TC 17 Steel

ISO 9444-2:2009

Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate

D

ISO 10332:2010

Non-destructive testing of steel tubes — Automated ultrasonic test-ing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness

D


ISO 12273:2010

Aerospace — Nuts, anchor, self-lock-ing, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient tempera-ture)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C — Dimensions

B

ISO 12573:2010

* Aircraft — Tubing tolerances — Inch series

E

ISO 10537:2010

* Space data and information transfer systems — Encapsulation service

N

ISO 13526:2010

* Space data and information transfer systems — Tracking data message

W

ISO 13527:2010

* Space data and information transfer systems — XML formatted data unit (XFDU) structure and construction rules

V

ISO 13537:2010

* Space data and information transfer systems — Reference architecture for space data systems

XB

ISO 13541:2010

* Space data and information transfer systems — Attitude data messages

U

ISO 15893:2010

* Space data and information transfer systems — Space communications protocol specification (SCPS) — Trans-port protocol (SCPS-TP)

XA

ISO 22647:2010

* Space data and information transfer systems — Space link identifiers

L

ISO 24917:2010

* Space systems — General test require-ments for launch vehicles

Q

ISO 26872:2010

* Space systems — Disposal of satellites operating at geosynchronous altitude

U

TC 22 Road vehicles

ISO 11452-11:2010

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromag-netic energy — Part 11: Reverberation chamber

L

ISO 8721:2010 * Road vehicles — Measurement techniques in impact tests — Optical instrumentation

T

TC 23 Tractors and machinery for agri-culture and forestry

ISO 26322-2:2010

Tractors for agriculture and forestry — Safety — Part 2: Narrow-track and small tractors

C

ISO 11839:2010

Machinery for forestry — Glazing and panel materials used in operator en-closures for protection against thrown sawteeth — Test method and perfor-mance criteria

C



ISO 29541:2010

* Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method

E

TC 34 Food products

ISO 26642:2010

Food products — Determination of the glycaemic index (GI) and recommenda-tion for food classification

J

ISO 3632-2:2010

* Spices — Saffron (Crocus sativus L.) — Part 2: Test methods

R

ISO 13720:2010

Meat and meat products — Enumera-tion of presumptive Pseudomonas spp.

D

ISO/TS 23647:2010

Vegetable fats and oils — Deter-mination of wax content by gas chromatography

H

TC 38 Textiles

ISO 12952-1:2010

Textiles — Assessment of the ignitabil-ity of bedding items — Part 1: Ignition source: smouldering cigarette

F

ISO 12952-2:2010

Textiles — Assessment of the ignitabil-ity of bedding items — Part 2: Ignition source: match-flame equivalent

F

TC 43 Acoustics

ISO 3741:2010 * Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms

V

ISO 3743-1:2010

* Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pres-sure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room

R

ISO 3744:2010 * Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essen-tially free field over a reflecting plane

W

ISO 11201:2010

Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections

Q

ISO 11202:2010

Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate envi-ronmental corrections

S

ISO 11204:2010

Acoustics — Noise emitted by machin-ery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environ-mental corrections

R


ISO 14171:2010

Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification

K

ISO 24034:2010

Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys — Classification

F


ISO 6472:2010 Rubber compounding ingredients — Symbols and abbreviated terms

J

ISO 18752:2006/Amd 1:2010

* Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pres-sure types for hydraulic applications — Specification — Amendment 1

XZ

ISO 34-1:2010 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

G

ISO 48:2010 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)

L

ISO 4647:2010 Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test

G

ISO 4649:2010 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device

K

ISO 4666-1:2010

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles

E

ISO 4666-3:2010

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)

H

ISO 7619-1:2010

Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)

E

ISO 7619-2:2010

Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method

C

TC 58 Gas cylinders

ISO 13341:2010

Gas cylinders — Fitting of valves to gas cylinders

D

TC 59 Buildings and civil engineering works

ISO 8394-1:2010

Building construction — Jointing products — Part 1: Determination of extrudability of sealants

C

ISO 8394-2:2010

Building construction — Jointing prod-ucts — Part 2: Determination of extrud-ability of sealants using standardized apparatus

D

TC 60 Gears

ISO/TR 10064-6:2009

Code of inspection practice — Part 6: Bevel gear measurement methods

R

TC 61 Plastics

ISO 27547-1:2010

* Plastics — Preparation of test speci-mens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens

F

ISO 15527:2010

Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods

E

ISO 18280:2010

* Plastics — Epoxy resins — Test methods

E

ISO 2558:2010 * Textile glass chopped-strand mats for reinforcement of plastics — Determina-tion of time of dissolution of the binder in styrene

B


TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 21457:2010

* Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems

R

ISO 21809-5:2010

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings

N

ISO 13680:2010

* Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions

X

TC 69 Applications of statistical methods

ISO 11462-2:2010

Guidelines for implementation of sta-tistical process control (SPC) — Part 2: Catalogue of tools and techniques

F

ISO/TS 28037:2010

* Determination and use of straight-line calibration functions

V

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 1920-10:2010

* Testing of concrete — Part 10: Deter-mination of static modulus of elasticity in compression

D

TC 76 Transfusion, infusion and injec-tion equipment for medical and pharmaceutical use

ISO 8536-4:2010

Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed

J

ISO 9187-1:2010

Injection equipment for medical use — Part 1: Ampoules for injectables

E

ISO 9187-2:2010

Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules

B


ISO 6719:2010 Anodizing of aluminium and its alloys — Measurement of reflectance char-acteristics of aluminium surfaces using integrating-sphere instruments

E

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 8769:2010 Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters

F

ISO 28218:2010

* Radiation protection — Performance criteria for radiobioassay

S

ISO 10276:2010

Nuclear energy — Fuel technology — Trunnions for packages used to transport radioactive material

K

ISO 26062:2010

Nuclear technology — Nuclear fuels — Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry

L

TC 92 Fire safety

ISO 12863:2010

* Standard test method for assessing the ignition propensity of cigarettes

K

TC 104 Freight containers

ISO 17712:2010

Freight containers — Mechanical seals P

TC 106 Dentistry

ISO 10873:2010

Dentistry — Denture adhesives H

ISO 11609:2010

Dentistry — Dentifrices — Require-ments, test methods and marking

K

TC 107 Metallic and other inorganic coatings

ISO 28706-5:2010

* Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems

F

ISO 28721-4:2010

* Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

C

TC 108 Mechanical vibration, shock and condition monitoring

ISO 18437-2:2005/Amd 1:2010

* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method — Amendment 1

XZ

ISO 18437-3:2005/Amd 1:2010

* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method — Amendment 1

XZ

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 11148-3:2010

Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers

N

ISO 11148-4:2010

Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools

N

ISO 11148-6:2010

Hand-held non-electric power tools — Safety requirements — Part 6: Assem-bly power tools for threaded fasteners

P

TC 119 Powder metallurgy

ISO 28279:2010

* Sintered metal materials — Determi-nation of the level of cleanliness of powder-metallurgy parts

B


ISO 8835-3:2007/Amd 1:2010

Inhalational anaesthesia systems — Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems — Amendment 1

XZ

TC 127 Earth-moving machinery

ISO 21507:2010

Earth-moving machinery — Perfor-mance requirements for non-metallic fuel tanks

C

ISO 22448:2010

Earth-moving machinery — Anti-theft systems — Classification and performance

C

TC 131 Fluid power systems

ISO 19879:2010

Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections

K



ISO 13268:2010

Thermoplastics piping systems for non-pressure underground drain-age and sewerage — Thermoplastics shafts or risers for inspection cham-bers and manholes — Determination of ring stiffness

E

ISO 13956:2010

* Plastics pipes and fittings — Decohe-sion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test

E

ISO 19899:2010

* Plastics piping systems — Polyolefin pipes and mechanical fitting assem-blies — Test method for the resistance to end load (AREL test)

D

TC 145 Graphical symbols

ISO 7010:2003/Amd 6:2010

Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 6

XZ

TC 146 Air quality

ISO 30011:2010

Workplace air — Determination of metals and metalloids in airborne par-ticulate matter by inductively coupled plasma mass spectrometry

Q


ISO 11349:2010

Water quality — Determination of low-volatility lipophilic substances — Gravimetric method

D

TC 159 Ergonomics

ISO 24500:2010

Ergonomics — Accessible design — Auditory signals for consumer products

D

TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO 23552-1:2007/Amd 1:2010

* Safety and control devices for gas and/or oil burners and gas and/or oil ap-pliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type — Amendment 1: Addition to the specific regional requirements in Japan

XZ


ISO 10110-8:2010

Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness

K

ISO 11382:2010

Optics and photonics — Optical materials and components — Charac-terization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm

F

ISO 14729:2001/Amd 1:2010

Ophthalmic optics — Contact lens care products — Microbiological require-ments and test methods for products and regimens for hygienic manage-ment of contact lenses — Amendment 1

XZ

TC 173 Assistive products for persons with disability

IEC 60601-2-52:2009/Cor 1:2010

* Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Technical Corrigen-dum 1

free

TC 178 Lifts, escalators and moving walks

ISO/TS 22559-2:2010

* Safety requirements for lifts (elevators) — Part 2: Safety parameters meeting the global essential safety require-ments (GESRs)

Q

TC 183 Copper, lead, zinc and nickel ores and concentrates

ISO 11790:2010

* Copper, lead, zinc and nickel concen-trates — Guidelines for the inspection of mechanical sampling systems

K

ISO 11794:2010

* Copper, lead, zinc and nickel concen-trates — Sampling of slurries

S

TC 184 Automation systems and integration

ISO 14649-111:2010

* Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 111: Tools for milling machines

L

ISO/TS 10303-439:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 439: AP239 product life cycle support

free

ISO/TS 10303-1001:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1001: Appearance assignment

free

ISO/TS 10303-1003:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1003: Curve appearance

free

ISO/TS 10303-1004:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1004: Elemental geometric shape

free

ISO/TS 10303-1005:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1005: Elemental topology

free

ISO/TS 10303-1006:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1006: Foundation representation

free

ISO/TS 10303-1007:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1007: General surface appearance

ZC

ISO/TS 10303-1009:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1009: Shape appearance layers

free

ISO/TS 10303-1016:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1016: Product categorization

free

ISO/TS 10303-1027:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1027: Contextual shape positioning

free

ISO/TS 10303-1032:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1032: Shape property assignment

free

ISO/TS 10303-1047:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1047: Activity

free


ISO/TS 10303-1050:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1050: Dimension tolerance

free

ISO/TS 10303-1051:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1051: Geometric tolerance

free

ISO/TS 10303-1068:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1068: Constructive solid geometry 3D

free

ISO/TS 10303-1115:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1115: Part collection

free

ISO/TS 10303-1132:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1132: Associative text

free

ISO/TS 10303-1141:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1141: Requirement view definition

free

ISO/TS 10303-1164:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1164: Product as individual

free

ISO/TS 10303-1289:2010

* Industrial automation systems and integration — Product data rep-resentation and exchange — Part 1289: AP239 management resource information

free

ISO/TS 10303-1292:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1292: AP239 product definition information

free

ISO/TS 10303-1293:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1293: AP239 part definition information

free

ISO/TS 10303-1309:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1309: Draw-ing definition

free

ISO/TS 10303-1310:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1310: Draughting element

free

ISO/TS 10303-1312:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1312: Draughting element specialisations

free

ISO/TS 10303-1323:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1323: Basic geometric topology

free

ISO/TS 10303-1343:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1343: Product placement

free

ISO/TS 10303-1345:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1345: Item definition structure

free

ISO/TS 10303-1348:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1348: Requirement management

free

ISO/TS 10303-1400:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1400: Product environment definition

free

ISO/TS 10303-1401:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1401: Product environment observed

free

ISO/TS 10303-1403:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1403: Geometric model relationship

free

ISO/TS 10303-1467:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1467: Risk management

free

ISO/TS 10303-1473:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1473: Description assignment

free

ISO/TS 10303-1476:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1476: Analysis identification

free

ISO/TS 10303-1484:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1484: System identification and version

free

ISO/TS 10303-1485:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1485: System view definition

free

ISO/TS 10303-1488:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1488: Verification and validation

free

ISO/TS 10303-1514:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1514: Advanced boundary representation

free

ISO/TS 10303-1613:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1613: Physi-cal unit non planar design view

free

ISO/TS 10303-1628:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1628: Design product data management

free

ISO/TS 10303-1634:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1634: Assembly component placement requirements

free

ISO/TS 10303-1646:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1646: Footprint definition

free

ISO/TS 10303-1651:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1651: Basic curve

free

ISO/TS 10303-1652:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1652: Basic geometry

free

ISO/TS 10303-1654:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1654: Characteristic

free


ISO/TS 10303-1655:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1655: Chemical substance

free

ISO/TS 10303-1656:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1656: Component grouping

free

ISO/TS 10303-1668:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1668: Fabrication joint

free

ISO/TS 10303-1670:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1670: Fabrication technology

free

ISO/TS 10303-1671:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1671: Feature and connection zone

free

ISO/TS 10303-1672:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1672: Fill area style

free

ISO/TS 10303-1682:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1682: Interconnect 2D shape

free

ISO/TS 10303-1689:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1689: Interconnect physical requirement allocation

free

ISO/TS 10303-1692:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1692: Land

free

ISO/TS 10303-1696:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1696: Lay-ered interconnect module 3D design

free

ISO/TS 10303-1698:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1698: Layered interconnect module design

free

ISO/TS 10303-1700:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1700: Lay-ered interconnect module with printed component design

free

ISO/TS 10303-1703:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1703: Model parameter

free

ISO/TS 10303-1705:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1705: Functional usage view

free

ISO/TS 10303-1707:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1707: Package

free

ISO/TS 10303-1710:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1710: Pack-aged part black box model

free

ISO/TS 10303-1713:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1713: Part feature grouping

free

ISO/TS 10303-1714:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1714: Part feature location

free

ISO/TS 10303-1716:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1716: Lay-ered interconnect complex template

free

ISO/TS 10303-1718:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1718: Layered interconnect simple template

free

ISO/TS 10303-1720:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1720: Part template shape with parameters

free

ISO/TS 10303-1724:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1724: Physi-cal unit 2D design view

free

ISO/TS 10303-1725:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1725: Physi-cal unit 3D design view

free

ISO/TS 10303-1728:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1728: Physi-cal unit design view

free

ISO/TS 10303-1730:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1730: Physi-cal unit shape with parameters

free

ISO/TS 10303-1731:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1731: Constructive solid geometry 2D

free

ISO/TS 10303-1732:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1732: Physi-cal unit usage view

free

ISO/TS 10303-1737:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1737: Printed physical layout template

free

ISO/TS 10303-1739:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1739: Production rule

free

ISO/TS 10303-1740:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1740: Requirement decomposition

free

ISO/TS 10303-1741:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1741: Sequential laminate assembly design

free

ISO/TS 10303-1747:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1747: Specification document

free

ISO/TS 10303-1749:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1749: Styled curve

free

ISO/TS 10303-1750:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1750: Text representation

free

ISO/TS 10303-1752:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1752: Thermal network definition

free


ISO/TS 10303-1755:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1755: Physi-cal connectivity definition

free

ISO/TS 10303-1756:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1756: Conductivity material aspects

free

ISO/TS 10303-1764:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1764: Shape feature

free

ISO/TS 10303-1765:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1765: Characterizable object

free

ISO/TS 10303-1767:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1767: Composite constituent shape

free

ISO/TS 10303-1786:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1786: Risk definition

free

ISO/TS 10303-1791:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1791: Primitive solids

free

ISO/TS 10303-1793:2010

* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1793: Solid model

free

ISO/TS 10303-1800:2010

* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1800: Support resource

free

TC 185 Safety devices for protection against excessive pressure

ISO 4126-10:2010

Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow

S

TC 188 Small craft

ISO 12215-8:2009/Cor 1:2010

Small craft — Hull construction and scantlings — Part 8: Rudders — Tech-nical Corrigendum 1

free

TC 189 Ceramic tile

ISO 13007-1:2010

* Ceramic tiles — Grouts and adhe-sives — Part 1: Terms, definitions and specifications for adhesives

D

ISO 13007-2:2010

* Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives

Q

ISO 13007-3:2010

* Ceramic tiles — Grouts and adhe-sives — Part 3: Terms, definitions and specifications for grouts

D

ISO 13007-4:2010

* Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts

L

TC 190 Soil quality

ISO/TS 29843-1:2010

Soil quality — Determination of soil microbial diversity — Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis

E


ISO 10993-10:2010

Biological evaluation of medical de-vices — Part 10: Tests for irritation and skin sensitization

V


ISO/TR 11769:2010

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Data retention for law enforcement

C

ISO/TS 14907-1:2010/Cor 1:2010

* Electronic fee collection — Test proce-dures for user and fixed equipment — Part 1: Description of test procedures — Technical Corrigendum 1

free

ISO 24101-2:2010

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Application management — Part 2: Conformance test

U


ISO 10678:2010

Fine ceramics (advanced ceramics, advanced technical ceramics) — De-termination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue

F

TC 213 Dimensional and geometrical product specifications and verification

ISO 10360-5:2010

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring ma-chines (CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems

P

TC 216 Footwear

ISO/TR 16178:2010

Footwear — Critical substances poten-tially present in footwear and footwear components

S


ISO 10582:2010

* Resilient floor coverings — Heteroge-neous poly(vinyl chloride) floor cover-ings — Specification

D

ISO 10595:2010

* Resilient floor coverings — Semi-flex-ible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles — Specification

D


ISO/TS 10867:2010

Nanotechnologies — Characteriza-tion of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy

G

ISO 29701:2010

* Nanotechnologies — Endotoxin test on nanomaterial samples for in vitro systems — Limulus amebocyte lysate (LAL) test

K

TC 232 Learning services for non-formal education and training

ISO 29990:2010

Learning services for non-formal edu-cation and training — Basic require-ments for service providers

J


ISO/IEC 19793:2008/Cor 1:2010

* Information technology — Open Dis-tributed Processing — Use of UML for ODP system specifications — Techni-cal Corrigendum 1

free

ISO/IEC TR 24748-1:2010

* Systems and software engineering — Life cycle management — Part 1: Guide for life cycle management

W

ISO/IEC TR 24774:2010

* Systems and software engineering — Life cycle management — Guidelines for process description

H

ISO/IEC 7811-6:2008/Cor 1:2010

* Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity — Technical Corrigen-dum 1: .

free


ISO/IEC 10373-3:2010

* Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices

U

ISO/IEC 15693-1:2010

* Identification cards — Contactless in-tegrated circuit cards — Vicinity cards — Part 1: Physical characteristics

C

ISO/IEC 24727-3:2008/Cor 1:2010

* Identification cards — Integrated circuit card programming interfaces — Part 3: Application interface — Technical Corrigendum 1

free

ISO/IEC TR 24772:2010

* Information technology — Program-ming languages — Guidance to avoiding vulnerabilities in programming languages through language selection and use

XB

ISO/IEC 29124:2010

* Information technology — Program-ming languages, their environments and system software interfaces — Ex-tensions to the C++ Library to support mathematical special functions

L

ISO/IEC 19775-2:2010

* Information technology — Computer graphics and image processing — Extensible 3D (X3D) — Part 2: Scene access interface (SAI)

B

ISO/IEC 13818-1:2007/Amd 4:2009

* Information technology — Generic coding of moving pictures and as-sociated audio information: Systems — Part 1: — Amendment 4: Transport of multiview video over Rec. ITU-T H.222.0 | ISO/IEC 13818-1

L

ISO/IEC 14496-2:2004/Cor 4:2010

* Information technology — Coding of audio-visual objects — Part 2: Visual — Technical Corrigendum 4

free

ISO/IEC 14496-5:2001/Amd 10:2007/Cor 4:2010

* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 10: SSC, DST, ALS and SLS reference software — Technical Corrigendum 4

free

ISO/IEC 14496-26:2010/Amd 2:2010

* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 2: BSAC conformance for broadcasting

XZ

ISO/IEC 29199-2:2010

* Information technology — JPEG XR image coding system — Part 2: Image coding specification

XD

ISO/IEC 29159-1:2010

* Information technology — Biometric calibration, augmentation and fusion data — Part 1: Fusion information format

L

Standards confirmed

The following International Standards are confimred for a five year period:

TC 22 Road vehicles

ISO 6797:1982 (reconfirmed)


ISO 789-4:1986 (reconfirmed)




ISO 6534:2007


TC 25 Cast irons and pig irons

ISO 2892:2007

TC 46 Information and documentation

ISO 15706-2:2007

TC 61 Plastics

ISO 21367:2007

TC 92 Fire safety

ISO/TR 15656:2003

TC 94 Personal safety -- Protective clothing and equipment

ISO 9185:2007



TC 96 Cranes

ISO 7296-3:2006





ISO 8185:2007

TC 136 Furniture

ISO 21016:2007

TC 160 Glass in building


ISO 16933:2007

ISO 16934:2007

ISO 16935:2007

TC 162 Doors and windows

ISO 15821:2007

ISO 15822:2007


ISO 10110-12:2007


ISO/TS 20452:2007


ISO/TS 19138:2006


ISO 24343-1:2007

Standards withdrawn


TC 2 Fasteners

ISO 225:1983 (replaced by ISO 225:2010)


TC 17 Steel






TC 22 Road vehicles



ISO/TS 12902:2001

(replaced by ISO 29541:2010)

TC 34 Food products

ISO 15161:2001 (replaced by )


ISO/TS 3632-2:2003

(replaced by ISO 3632-2:2010)

TC 38 Textiles

ISO 12952-1:1998 (replaced by ISO 12952-1:2010)




TC 43 Acoustics







ISO 24034:2005/Amd 1:2008











ISO 7619-1:2004/Amd 1:2008



TC 58 Gas cylinders



ISO 8394:1988 (replaced by ISO 8394-1:2010, ISO 8394-2:2010)

TC 61 Plastics




TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO 6784:1982 (replaced by ISO 1920-10:2010)

TC 76 Transfusion, infusion and injection equipment for medical and pharmaceu-tical use






TC 85 Nuclear energy, nuclear technologies, and radiological protection


ISO 8769-2:1996 (replaced by ISO 8769:2010)

ISO 12790-1:2001 (replaced by ISO 28218:2010)


ISO/PAS 17712:2006


TC 106 Dentistry


TC 107 Metallic and other inorganic coatings


TC 127 Earth-moving machinery


TC 131 Fluid power systems




TC 184 Automation systems and integration

ISO/TS 10303-1001:2008

(replaced by ISO/TS 10303-1001:2010)

ISO/TS 10303-1003:2008


ISO/TS 10303-1006:2006


ISO/TS 10303-1007:2008


ISO/TS 10303-1047:2004


ISO/TS 10303-1132:2008


ISO/TS 10303-1141:2006


ISO/TS 10303-1309:2008


ISO/TS 10303-1310:2008


ISO/TS 10303-1312:2008


ISO/TS 10303-1323:2008


ISO/TS 10303-1514:2008


ISO/TS 10303-1672:2008


ISO/TS 10303-1747:2008


ISO/TS 10303-1749:2008



ISO/TS 10303-1750:2008


ISO/TS 10303-1756:2006


ISO/TS 10303-1764:2006


ISO/TS 10303-1765:2006


ISO/TS 10303-1767:2008


TC 189 Ceramic tile





TC 213 Dimensional and geometrical product specifications and verification


ISO/PAS 12868:2009



ISO/IEC TR 24774:2007

(replaced by ISO/IEC TR 24774:2010)

ISO/IEC 10373-3:2001

(replaced by ISO/IEC 10373-3:2010)

ISO/IEC 15693-1:2000


ISO/IEC 19775-2:2004


ISO/IEC 29199-2:2009


Meeting calendar

(update at 25 August 2010)

Meetings called for the month of September are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

October 2010

1 Paris (France) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

1 Houston (USA) TC 193 Natural gas

1 Houston (USA) TC 193/SC 1 Natural gas/Analysis of natural gas

1 Beijing (China) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment

1 Beijing (China) TC 201/SC 4 Surface chemi-cal analysis/Depth profiling

1 Beijing (China) TC 201/SC 5 Surface chemical analysis/Auger elec-tron spectroscopy

1 Beijing (China) TC 201/SC 7 Surface chemi-cal analysis/X-ray photoelectron spectroscopy

1 San Francisco (USA)

TC 250 Project committee: Sustainability in event management

2 Beijing (China) TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

2 Beijing (China) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy

4-5 Geneva (Switzerland)

TAG 8 Building

4-5 Tokyo (Japan) TC 209 Cleanrooms and as-sociated controlled environments

4-6 Mechelen (Belgium)

TC 8/SC 2 Ships and marine technology/Ma-rine environment protection

4-8 Pulawy (Poland) TC 190 Soil quality

4-8 Pulawy (Poland) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

4-8 Kyoto (Japan) TC 217 Cosmetics

5 Köln (Germany) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

5-7 Bochum (Germany)

TC 96/SC 10 Cranes/Design princi-ples and requirements

5-8 Orlando (USA) TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols

6 Brussels (Belgium)

TC 173 Assistive products for persons with disability

6-8 Takamatsu (Japan)

JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

7 Pulawy (Poland) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

7 Pulawy (Poland) TC 190/SC 4 Soil quality/Biological methods

7 Pulawy (Poland) TC 190/SC 7 Soil quality/Soil and site assessment

8 Westminster, Colorado (USA)

TC 28/SC 2 Petroleum products and lubricants/Meas-urement of petroleum and related products

8 Tokyo (Japan) TC 122/SC 4 Packaging/Packaging and Environment

9 Garching (Germany)

TC 60 Gears

10-11 Berlin (Germany) JTC 1/SC 27 Information tech-nology/IT Security techniques

11-13 Luxemburg (Luxembourg)

TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water


11-13 Pretoria (South Africa)

TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction

11-14 Dayton, Ohio (USA)

TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

11-16 Sao Paulo (Brazil)

TC 130 Graphic technology

12 New Orleans (USA)

TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

12-14 Paris (France) TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

12-14 St-Denis (France)

TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

12-15 London (United Kingdom)

TC 172/SC 1 Optics and photon-ics/Fundamental standards

13 Pretoria (South Africa)

TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages


TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works

13 London (United Kingdom)

TC 221 Geosynthetics

13-14 New Orleans (USA)

TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

13-15 Berlin (Germany) TC 37/SC 4 Terminology and other language and content resources/Language resource management


TC 59/SC 15 Buildings and civil engineering works/Performance criteria for single family at-tached and detached dwellings

14-15 Lisbon (Portugal) TC 253 Project committee: Treated wastewater re-use for irrigation

15 New Orleans (USA)

TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims



15 Delft (Netherlands)

TC 238 Solid biofuels


TC 183 Copper, lead, zinc and nickel ores and concentrates

18-22 Independence (USA)

TC 2 Fasteners

18-22 Independence (USA)

TC 2/SC 10 Fasteners/Prod-uct standards for fasteners

18-22 Incheon (Korea, Republic of)


18-22 Adelaide (Australia)

TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

18-22 Haarlem (Netherlands)


18-22 Weinheim (Germany)

TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management

18-22 Portland, Oregon (USA)

TC 113 Hydrometry

18-22 Tokyo (Japan) TC 131 Fluid power systems

18-22 Beijing (China) TC 242 Project Committee: Energy Management

19 Shanghai (China) TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)

19-21 Vienna (Austria) TC 58/SC 3 Gas cylinders/Cylin-der design

20 Independence (USA)

TC 2/SC 7 Fasteners/Refer-ence standards for fasteners (mainly covering terminology, dimensioning, sizes and tolerancing)

20 Shanghai (China) TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

20 Shanghai (China) TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

20-21 St-Denis (France)

TC 17/SC 3 Steel/Steels for struc-tural purposes

20-22 Tokyo (Japan) TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments

21 Independence (USA)

TC 2/SC 1 Fasteners/Me-chanical properties of fasteners

21 Tokyo (Japan) TC 131/SC 5 Fluid power systems/Control products and components

21 Shanghai (China) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications

21 Shanghai (China) TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications

21-22 Vienna (Austria) TC 58 Gas cylinders


21-22 Wiesbaden (Germany)

TC 159 Ergonomics

22 Haarlem (Netherlands)

TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry

22 Haarlem (Netherlands)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

22 Shanghai (China) TC 138 Plastics pipes, fittings and valves for the transport of fluids

24-25 Portland, Oregon (USA)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

25-26 Bratislava (Slovakia)

TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

25-28 Delft (Netherlands)

TC 46/SC 11 Information and doc-umentation/Archives/records management


TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

26 Frankfurt (Germany)

TC 112 Vacuum technology

26-27 Doha (Qatar) TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

26-28 Rio de Janeiro (Brazil)

TC 126 Tobacco and tobacco products

27 Paris (France) TC 149/SC 1 Cycles/Cycles and major sub-assemblies

27-28 Bangkok (Thailand)

TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

27-29 Okinawa (Japan) TC 202 Microbeam analysis

28 Hangzhou (China)

TC 92/SC 3 Fire safety/Fire threat to people and environment

28-29 Budapest (Hungary)

TC 184/SC 2 Automation systems and integration/Robots and robotic devices

29 Hangzhou (China)

TC 92/SC 4 Fire safety/Fire safety engineering

18-22 Haarlem (Netherlands)

TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)

November 2010

1-5 Gaithersburg (USA)

JTC 1/SC 7 Information technol-ogy/Software and systems engineering

1-5 Jeju (Korea, Republic of)

* TC 204 Intelligent transport systems

1-5 Berlin (Germany) * TC 241 Project Committee: Road-Traffic Safety Management System


TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

4 Berlin (Germany) TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement


TC 92/SC 1 Fire safety/Fire initia-tion and growth


TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles

5 Venice (Italy) TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics

5 Berlin (Germany) TC 70 Internal combustion engines

8 Shenzen (China) * TC 160 Glass in building

8-9 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

8-10 Suresnes (France)


8-13 Belfast (United Kingdom)


9 Osaka (Japan) TC 227 Springs

10 Rome (Italy) TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

10-11 Mainz (Germany) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction

10-12 Pirmasens (Germany)

* TC 137 Footwear sizing des-ignations and marking systems

11 (USA) TC 22/SC 19 Road vehicles/Wheels

15 Santiago (Chile) TC 243 Project Committee: Consumer product safety

15 Alexandria (USA) TC 244 Industrial furnaces and associated thermal processing equipment

15-17 Sydney (Australia)

TC 205 Building environment design

15-18 Santiago (Chile) TC 240 Project Committee: Product recall

15-19 Melbourne (Australia)

TC 181 Safety of toys

16 Shanghai (China) TC 142 Cleaning equipment for air and other gases

17-18 Beijing (China) TC 91 Surface active agents


TC 159/SC 3 Ergonomics/An-thropometry and biomechanics

18-19 Paris (France) * CASCO Committee on con-formity assessment

19 Paris (France) TC 59/SC 17 Buildings and civil engineering works/Sustainability in build-ing construction

19 Tokyo (Japan) ** TC 94 Personal safety -- Protective clothing and equipment


22-23 Hannover (Germany)

TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

22-24 Mumbay (India) TC 252 Project committee: Natural gas fuelling stations for vehicles


TC 234 Fisheries and aquaculture


TC 59/SC 14 Buildings and civil engineering works/Design life

26 Sevilla (Spain) TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection

29-30 Tokyo (Japan) TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design for assistive products

November-December 2010


TC 223 Societal Security

December 2010


TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

2-3 Kuala Lumpur (Malaysia)


3 Winterthur (Switzerland)

JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

3 Delft (Netherlands)

TC 98 Bases for design of structures

6-10 Kuala Lumpur (Malaysia)


9 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

9-10 Beijing (China) TC 93 Starch (includ-ing derivatives and by-products)

9-10 Canberra (Australia)

TC 211 Geographic in-formation/Geomatics


TC 176/SC 2 Quality management and quality assur-ance/Quality systems

2nd Semester 2010

Bangalore (India) ** TC 34/SC 15 Food products/Coffee

Month unknown 2010

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

January 2011

10-11 Oxford (United Kingdom)

* TC 37/SC 4 Terminology and other language and content resources/Language resource management

11-12 Singapore (Singapore)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

17-21 Orlando (USA) TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma

17-21 Winterthur (Switzerland)

** TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

17-21 Orlando (USA) ** TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems

27 Las Vegas (USA) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

Paris (France) ** TC 213 Dimensional and geometrical product specifications and verification

February 2011

18 (USA) ** TC 154 Processes, data elements and documents in com-merce, industry and administration

21-25 Seattle (USA) ** JTC 1/SC 35 Information technol-ogy/User interfaces

21-25 Osaka (Japan) TC 107 Metallic and other inorganic coatings

23 Paris (France) * TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests

23-24 (Unknown) ** TMB Technical Manage-ment Board

February-March 2011

28-4 Berlin (Germany) * TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

March 2011

12-18 Strasbourg (France)

* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training


** COUNCIL Council


* COUNCIL Council

18-19 Tokyo (Japan) * TC 219 Floor coverings

21-25 Milan (Italy) TC 118 Compressors and pneumatic tools, ma-chines and equipment

21-25 Milan (Italy) TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines

28-29 Berlin (Germany) * TC 117 Fans


April 2011

3-8 Paris (France) ** TC 92/SC 3 Fire safety/Fire threat to people and environment

3-8 Berlin (Germany) * TC 127 Earth-moving machinery

4-5 Madrid (Spain) * TC 34/SC 11 Food products/Animal and vegetable fats and oils


** TC 43 Acoustics


* TC 43/SC 1 Acoustics/Noise


* TC 43/SC 2 Acoustics/Building acoustics

4-8 (Netherlands) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing

8 Paris (France) TC 92 Fire safety

8 (Italy) ** TC 228 Tourism and related services

11 Stuttgart (Germany)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

11-15 Tokyo (Japan) ** TC 210 Quality management and corresponding general aspects for medical devices

13-14 Dresden (Germany)

* TC 199 Safety of machinery

15-30 Madrid (Spain) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

(Unknown) ** TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters

May 2011


* TC 46 Information and documentation

3-4 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables

7-10 (Netherlands) ** TC 68/SC 4 Financial services/Securities and related financial instruments

9-13 Berlin (Germany) ** TC 114 Horology

12 Amsterdam (Netherlands)

** TC 68 Financial services

15 Zurich (Switzerland)

** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

16-18 Frankfurt (Germany)

* TC 214 Elevating work platforms

16-20 Stockholm (Sweden)

* TC 156 Corrosion of metals and alloys

18-19 Pau (France) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

23-24 Stavanger (Norway)

** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment


* TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments

23-27 Chicago (USA) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


* TC 29 Small tools


* TC 29/SC 5 Small tools/Grinding wheels and abrasives


* TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials

23-27 Salt Lake City (USA)

** TC 171 Document manage-ment applications

23-28 Jeju (Korea, Republic of)

* TC 147 Water quality

25-31 St. Peters-burg (Russian Federation)

** TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe


* TC 211 Geographic in-formation/Geomatics

Paris (France) ** TC 6 Paper, board and pulps

(Korea, Repub-lic of)

** TC 202 Microbeam analysis

May-June 2011


TC 96 Cranes


TC 96/SC 3 Cranes/Selection of wire ropes


TC 96/SC 6 Cranes/Mobile cranes


TC 96/SC 8 Cranes/Jib cranes

June 2011

6-9 (Austria) ** TC 145 Graphical symbols

8-9 (Unknown) ** TMB Technical Manage-ment Board

12-17 Seoul (Korea, Republic of)

** TC 37 Terminology and other language and content resources

13-17 Brussels (Belgium)

* TC 4 Rolling bearings

13-17 Vancouver (Canada)

** TC 121 Anaesthetic and res-piratory equipment


** TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems


** TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment


20-24 (USA) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems


** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

San Francisco (USA)

** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

(South Africa) ** TC 137 Footwear sizing des-ignations and marking systems

2nd Quarter 2011

Prague (Czech Republic)

** TC 204 Intelligent transport systems

(USA) ** TC 226 Materials for the production of primary aluminium

July 2011


* REMCO Committee on refer-ence materials

24 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

August 2011

(Sweden) ** JTC 1/SC 35 Information technol-ogy/User interfaces

September 2011

9-15 Chicago (USA) ** TC 163 Thermal performance and energy use in the built environment

12-14 Chicago (USA) * TC 205 Building environment design

12-16 Rotorua (New Zealand)

* TC 218 Timber

13-15 Moscow (Rus-sian Federation)

** TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

15-17 (Italy) ** TC 201 Surface chemical analysis

18-24 Paris (France) * TC 164 Mechanical testing of metals

19-23 Bali (Indonesia) * TC 165 Timber structures

20-23 Washington, D.C (USA)

** TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

24 New Delhi (India) * COUNCIL Council

Shanghai (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Chicago (USA) ** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting sys-tems using foam and powder

(France) ** TC 59/SC 8 Buildings and civil engineering works/Sealants

Beijing (China) ** TC 213 Dimensional and geometrical product specifications and verification

(Unknown) ** TMB Technical Manage-ment Board

3rd Quarter 2011

(USA) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

(United Kingdom)

** TC 41/SC 1 Pulleys and belts (including veebelts)/Friction

(United Kingdom)

** TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts

(United Kingdom)

** TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives

October 2011


* TC 89 Wood-based panels


* CASCO Committee on con-formity assessment

24-28 Moscow (Rus-sian Federation)

** TC 178 Lifts, escalators and moving walks


** JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

(Japan) ** TC 34/SC 17 Food products/Man-agement systems for food safety

(China) ** TC 111 Round steel link chains, chain slings, components and accessories

(China) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings

(China) ** TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories

October-November 2011


** TC 46/SC 11 Information and doc-umentation/Archives/records management

November 2011

7-8 Berlin (Germany) TC 1 Screw threads

7-12 (USA) * JTC 1 Information technology


(Unknown) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

(Japan) ** TC 38 Textiles

(Japan) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

Pau (France) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

(Thailand) ** TC 123 Plain bearings

(Thailand) ** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions

(Thailand) ** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details

(Thailand) ** TC 123/SC 5 Plain bearings/Quality analysis and assurance

(Thailand) ** TC 123/SC 6 Plain bearings/Terms and common items

4th Quarter 2011

(Japan) ** TC 172/SC 3 Optics and photon-ics/Optical materials and components

(South Africa) ** TC 211 Geographic in-formation/Geomatics

Month unknown 2011

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Edinburgh (Unit-ed Kingdom)

** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

Kyoto (Japan) ** TC 33 Refractories

(United Kingdom)

** TC 34/SC 9 Food products/Microbiology

(Netherlands) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Australia) ** TC 190 Soil quality

(France) ** TC 206 Fine ceramics

January 2012

Charlotte (USA) ** TC 213 Dimensional and geometrical product specifications and verification

February 2012


** JTC 1/SC 35 Information technol-ogy/User interfaces

Florida (USA) ** TC 115 Pumps

March 2012

(China) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems


** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Italy) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

April 2012

Durban (South Africa)

** TC 135 Non-destructive testing


** TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing


** TC 135/SC 5 Non-destructive testing/Radiation methods

May 2012

7-11 Berlin (Germany) ** TC 46 Information and documentation

10 Chicago (USA) ** TC 68 Financial services

2nd Quarter 2012

(France) ** TC 211 Geographic in-formation/Geomatics

September 2012

19-21 San Diego (USA) ** GA General Assembly

22 San Diego (USA) ** COUNCIL Council

Cadiz (Spain) ** TC 213 Dimensional and geometrical product specifications and verification

4th Quarter 2012

(Saudi Arabia) ** TC 211 Geographic in-formation/Geomatics

Month unknown 2012

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Vienna (Austria) ** REMCO Committee on refer-ence materials

Delft (Netherlands)

** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

(Unknown) ** TC 34 Food products

(USA) ** TC 44 Welding and allied processes

Chicago (USA) ** TC 68/SC 4 Financial services/Securities and related financial instruments

(South Africa) ** TC 102 Iron ore and direct reduced iron


Berlin (Germany) ** TC 107 Metallic and other inorganic coatings

Sydney (Australia)

** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Brazil) ** TC 164 Mechanical testing of metals

(Kenya) ** TC 190 Soil quality

(France) ** TC 205 Building environment design

(Thailand) ** TC 207 Environmental management

March 2013

(Kenya) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Month unknown 2013

(USA) ** REMCO Committee on refer-ence materials

People and places

26 ISO Update, Supplement to ISO Focus+– October 2010

ISO Members

Since the September 2010 issue of ISO Focus+, the following changes affecting ISO members have occurred:

New CEO

Correspondent member

KYRGYZSTAN (KYRGYZST) Director: Mr. Alimbek Kurmanbaev MOLDOVA (INSM) General Director: Mr. Vitalie Dragancea

Address change

Member bodies

GHANA (GSB) Tel. +233 30 25 00 65 Fax +233 30 25 00 092 NIGERIA (SON) Web www.sononline.org

Correspondent member

SURINAME (SSB) E-mail [email protected]

Documents

Supplement to ISO Focus - tsinfo.js.cn · ISO/CD 15614-14 Specification and ... ISO Update, Supplement to ISO Focus -- October 2010 3 TC 35 Paints and varnishes ... (Revision of ISO/TS