Upload
jb10
View
228
Download
0
Embed Size (px)
Citation preview
8/12/2019 Swing Fram
1/4
19 Swing Frame for protective cabinet
Sd732-2e-19 Swing Frame for protective cabinet Page 1/ 4
1 ApplicationFitting 19 rack mounted instruments into INTERTECcabinets and houses
2 Description
The integrated swing frame allows 19 racks to be usedwith all the advantages of INTERTEC protective cabinets,e.g.:
Efficient insulation which prevents condensation andtemperature variation
A high degree of dust and water protection for sensitiveinstruments is possible up to IP 65Double glazed windows in acrylic or safety glassinstalled at frame heightComplete system of accessories
3 Advantages
Exceptionally variable construction systemNearly all special requests can be incorporatedNo separate framework is needed, as it is integratedinto the existing mounting rail system.Corrosion-resistant 19 swing frame fabricated of brightStainless steelIntermediate sizes, special heights and widths are
available
4 Features
19 construction system acc. IEC 60297 (DIN 41 494)Low distortion, welded constructionInfinitely variable in heightLocked by double spade bit style key and lock
5 Options
The tables on pages 2 to 4 show the most commonversions. Where possible the standard arrangement iscentred and an offset arrangement is shown in the planview next to it. The dimensions D, X and Y can beselected within certain limits, and the maximumavailable depth E is dependent upon them.Special designs available on requestNumber of units to your specification:up to 1000 mm a maximum of 16 units are possible,up to 1250 mm a maximum of 21 units are possible,up to 1500 mm a maximum of 26 units are possible,up to 1750 mm a maximum of 31 units are possible,up to 2000 mm a maximum of 39 units are possible.
Side covers (shown in the diagram in maximum width,dimensions X and Y)Hinged left or right.Painted grey RAL 7032
Also available as metrical construction system toIEC 60917
BASIC CLASSIC
Detail W
8/12/2019 Swing Fram
2/4
19 Swing Frame for protective cabinet
Sd732-2e-19 Swing Frame for protective cabinet Page 2/ 4
6 Overview of ArrangementsI .
Twin beam mounting II.
Single beam moun ting III .
Twin beam mounting IV.
Single beam moun ting
fixed behind door depth adjustable
Installation weight 100kg,higher loads on requestLocking point top and/orbottom possible
Installation weightin CLASSIC 50 kg,in BASIC 30 kg,higher loads on request.No restrictions from lowercross-beam
Installation weight 100kg,higher loads on requestLocking point top and/orbottom possible
Installation weightin CLASSIC 50 kg,in BASIC 30 kg,higher loads on request.No restrictions from lowercross-beam
mounting in BASIC ... in CLASSIC mounting in BASIC ... in CLASSIC
I. Twin beam mounting, fixed behind door
600 800
X+Y 160
1000
X+Y 360
1250
Supporting beam
Door
Wall panel
Optionally(reduced installation depth)
8/12/2019 Swing Fram
3/4
19 -Swing Frame for protective cabinet
Sd732-2e-19 Swing Frame for protective cabinet Page 3/ 4
II. Single beam mounting, fixed behind door
600 800
1000 1250
III. Twin beam mounting, depth adjustable
600 800
X+Y 360
1000
X+Y 360
1250Optionally
(reduced installation depth)
Optionally(reduced installation depth)
8/12/2019 Swing Fram
4/4
19 -Swing Frame for protective cabinet
Sd732-2e-19 Swing Frame for protective cabinet Page 4/ 4
IV. Single beam mounting , depth adjustable
600 800
1000 1250
7 Swivelling through 180
e.g. CLASSIC ...080...
BASIC and other dimensions on request.
Optionally(reduced installation depth)