KLINGER Maxiprofile (Kamprofile) Gaskets-

Type T109

KLINGER type 109 exhibit excellent results, particularly where high pressures, temperatures and therefore, high bolt loads are to be controlled.

A solid metal ring is machined to a specific Klinger profile on each contact face which provides a serrated surface finish. Under compression the finish develops high surface stress values enabling the soft coating to fill any imperfections in the flange facing. A variety of surface coatings can be applied to service high temperature, pressure or corrosive media applications.

Temperatures range from cryogenic to 1090°C with a wide chemical resistance.

Applications of T109 Gaskets:Heat Exchanger and VesselapplicationsHigh and low temperaturesPressures of up to 250 barLow bolt loadsSmall flange widths

General Properties ofT109 Gaskets:

Have a wide range ofseating stresses underwhich the seal is effectedand maintainedCan be used when there isinsufficient bolt load to sealconventional gasket materialsEasy to handle and fitSuitable for a wide rangeof operating conditionsThe soft facing layerprevents damage to theflangeProvide a high integrityseal including thermo cyclingand shock loading conditionsCan be refurbished with anew facing layer andreused depending on condition of core

Materials :Support Ring:Stainless Steel 316L (standard)Available ex stock are 304L, 321, mild steel, titanium, duplex, inconel, monel.

Other materials are available on request and include aluminium, hastelloy and many others.

Coating Materials:Graphite, PTFE , Mica, Klingersil plus others.

Standard core design is parallel which offers theadvantages of even stress distribution across thegasket face. This type of profile ensures a uniform high seating stress and is effective for low bolt loadapplications.

Other Profiles Available:

Core Design:

LA1 – Lateral profiled joint with guide ring. Most often used for standard flanges.LA2 – Lateral profiled joint. Most often used with or without pass bars for heat exchangers.LA3 – Lateral profiled joint with floating guide ring.

0 .1 1 .0

90°0

.45

0 .2

0.5

Available to suit standard flanges

ASME/ANSI B16.5 ratings 150# - 2500#.

ASME B16.47 Series A (MSS SP44).

ASME B16.47 Series B (API 605).

DIN.

Others on request.

Typical Heat Exchangers Gasket Locations

1 2 4

53 6

6

Gasket Locations:1. Channel box cover. 2. Shell to tubesheet. 3. Tubesheet to Channel box.4. Shell cover. 5. Floating Head. 6. Flanges

Typical Heat Exchangers Styles

KX - 1 KX - 2 KX - 3 KX - 6 KX - 7 KX - 9 KX - 10 KX - 11 KX - 13 KX - 15 KX - 16

KX - 17 KX - 18 KX - 19 KX - 21 KX - 22 KX - 25 KX - 26 KX - 27 KX - 28 KX - 29 KX - 31

KX - 32 KX - 34 KX - 35 KX - 37 KX - 39 KX - 41 KX - 42 KX - 43 KX - 44 KX - 47 KX - 48

KX - 49 KX - 53 KX - 54 KX - 55 KX - 56 KX - 57 KX - 58 KX - 65 KX - 71

For sales and technical advice, please contact:Tel: +61 08 9350 1100 or Toll Free No.1300 79 82 79 (in Australia).Email:sales@klinger.com.au or technical_service@klinger.com.au.Website: www.klinger.com.au

Klinger Branch Offices:

Other KLINGERProducts

� Spiral wound Gaskets.� Metal Ring Joint Gaskets(RTJ).� Metal Clad Gaskets.� KLINGERsil sheeting.� KLINGERgraphite PSM.� KLINGERtop-chem Grades.� KLINGER Pump and Valve Packings.� KLINGER Liquid and Magnetic Level Gauges.� KLINGER Piston Valves.� Spray Shields.

For details of the nearest Klinger Branch and contact telephone numbers , please visit our website: www.klinger.com.au

All information and recommendations contained in this publication are to the best of our knowledge correct. Since conditions of use are beyond our control users must satisfy themselves that products are suitable for the intended processes and uses. No warranty is given or implied in respect of information or recommendations or that any use of products will not infringe rights belonging to other parties. We will not be liable for any loss or damage resulting in way from any reliance on this publication or from any goods manufactured by us. We reserve the right to change product design and properties without notice. Nothing in this clause excludes, restricts or modifies any condition, warranty, right or remedy which is conferred on you by the Trade Practices Act 1974 or any other consumer legislation.

…Sealing with Security RKA 8990109 Nov/08