Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
TE Connectivity Rectangular DC jack
• Application: (Portable) Electronic devices:
• Double contacts (power and ground) enhance reliability
• Louvre contacts in receptacle provide max power transmission
• Plug detection contact allows for electrical switching• Power: 7A or 10.7A• Voltage: 25 V max• Durability: 5,000 cycles
Introduction
2
Features
3
Plug side
Rec side
Detectcontact
4 contact points enhance reliabilityand current capacity
Groundcontact
Power contact
Power contactPower contact
Detectcontact
Features
4
Plug side
Rec side
Mating sequence: Ground – Detect - Power
Symmetrical plug design allows for 180 deg insertion
GND Contact landing zone
Receptacle Features
5
Power
Ground connected to shell
Housing available in black and yellow
Power
Detect
Ground
Plug Features
6
Power
GroundDetect
Ground
Power
Detect
Plug and receptacle
7
cable mounted plug (10.7A, one size fits all)
Receptacle variations:• Cable mounted• DIP Type• Color Yellow/black• Solder tail length• Current
Dimensions
8
Receptacle Mounting style
9
Cable termination
Detect pin
Cable termination
Detect pin
DIP Type
Cable terminationw/o shell
Overview (partnumbers)
10
1-2129333-1 Receptacle Yellow N Cable N/A 16.2 17 6.5
1-2129333-2 Receptacle Black N Cable N/A 16.2 17 6.5
1-2129345-1 Receptacle Yellow Y DIP 1.4mm 15.1 16.2 6.5
1-2129345-2 Receptacle Yellow Y DIP 1.2mm 15.1 16.2 6.5
2-2129345-1 Receptacle Black Y DIP 1.2mm 15.1 16.2 6.5
2129516-1 Receptacle Black Y Cable N/A 16.2 15.6 6.5
1-2129458-1 Receptacle Black Y DIP 1.4mm 15.1 14.25 6.5
1-2129458-2 Receptacle Black Y DIP 1.2mm 15.1 14.25 6.5
2129567-1 Receptacle Black Y Cable N/A 15.1 17 6.5
1-2129334-1 Plug Yellow Y Cable N/A 11.9 23.7 4.65
Housing Color
Termination Type
Current Rating
PN ImageConnector
Type
7A
10.7A
Length (X)
Width (Y)
Height (Z)
DIP Solder Tail Length
Metal Shell
Non preferred pn
Sheet1
DC Jack QRG
Current RatingPNImageConnector TypeHousing ColorMetal ShellTermination TypeDIP Solder Tail LengthLength (X)Width (Y)Height (Z)
7A1-2129333-1ReceptacleYellowNCableN/A16.2176.5
1-2129333-2ReceptacleBlackNCableN/A16.2176.5
1-2129345-1ReceptacleYellowYDIP1.4mm15.116.26.5
1-2129345-2ReceptacleYellowYDIP1.2mm15.116.26.5
2-2129345-1ReceptacleBlackYDIP1.2mm15.116.26.5
2129516-1ReceptacleBlackYCableN/A16.215.66.5
10.7A1-2129458-1ReceptacleBlackYDIP1.4mm15.114.256.5
1-2129458-2ReceptacleBlackYDIP1.2mm15.114.256.5
2129567-1ReceptacleBlackYCableN/A15.1176.5
1-2129334-1PlugYellowYCableN/A11.923.74.65
Sheet2
Sheet3
Recommended PCB layout
11
Availability
All parts are available and in mass production from GuangdongCustomization can be discussed if needed (keying)
12
13
© 2015 TE Connectivity Ltd. family of companies. All Rights Reserved.
TE Connectivity, TE, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks of the TE Connectivity Ltd. Family of companies. Other products, logos and company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIESREGARDING THE INFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information.
TE Connectivity Rectangular DC jackIntroductionFeaturesFeaturesReceptacle FeaturesPlug FeaturesPlug and receptacleDimensionsReceptacle Mounting styleOverview (partnumbers)Recommended PCB layoutAvailabilitySlide Number 13