The Global Service Centre for Cell Site SolutionsAmphenol Outdoor Connectors

• PT/LC– Duplex LC based outdoor connectors and receptacles

• PT/MPO MT/MPO based outdoor connectors and receptacles

• AARC (ODC® Compatible)

2 or 4 fiber sealed connectors and receptacles

• NODE Cables 2 to 24 fiber optical transport and CATV node

assemblies

• Custom Fiber Optic Assemblies Custom configurations using Breakout, Distribution and

OSP cable

R2CT Field Installable sealed assembly housing

• TxRx Outdoor Direct Pluggable– LC/SFP

– RJ/SFP

ODC is a trademark of Huber & Suhner

The Global Service Centre for Cell Site SolutionsPT/LCReceptacles & Assemblies

Sealed Two Fiber Circular Interconnect• LC Based optical interface• Factory Terminated Cable Assemblies• Flange Mount or Jam Nut Receptacles• Suitable for Indoor or Outdoor applications• Available with Single mode or Multimode fiber• IP67 dust and water protection• Scoop Proof interface to protect the fiber• Easy access to clean and inspect the fiber endface• Shielded connector housing• Vibration Resistant Mil-Spec 26482 bayonet or threaded

coupling styles available

Applications:• WiMax and LTE radio enclosures• 2G, 3G, and 4G Wireless systems• Base Station• Portable Broadcast Equipment

The Global Service Centre for Cell Site SolutionsPT/MPOReceptacles and Assemblies

Sealed Multi-Fiber Circular Interconnect• MPO Based optical interface• 4, 8, 12 or 24 fiber factory terminated cable

assemblies• Flange Mount or Jam Nut receptacles• Suitable for Indoor or Outdoor applications• Available with Single mode or Multimode fiber• IP67 dust and water protection• Easy access to clean and inspect the fiber endfaces• Shielded connector housing• Vibration Resistant Mil-Spec 26482 bayonet or threaded

coupling styles available

Applications:• WiMax and LTE radio enclosures• 2G, 3G, and 4G Wireless systems• Base Station• Portable Broadcast Equipment

The Global Service Centre for Cell Site SolutionsAARCCircular Indoor / Outdoor Assemblies

Sealed Two or Four Fiber Circular Interconnect• Factory Terminated Plug and Receptacle Assemblies• Flange Mount or Jam Nut Receptacles• Suitable for Indoor or Outdoor applications• Available with Single mode or Multimode fiber• Ceramic 1.25mm ferrules• Based on the “N” Type Connector• IP67 dust and water protection• Scoop Proof interface to protect the fiber• Intermateable with ODC® Connector

Applications:• WiMax and LTE Remote Radio Heads• 2G, 3G, 4G Wireless systems• Base Station• Portable Broadcast Equipment

*ODC is a registered trademark of Huber & Suhner.

The Global Service Centre for Cell Site Solutions Node Cable Assemblies

Outdoor Node Assemblies• Two to twelve fibers• Stainless steel or polymer housing• Standard SCTE 5/8”-24 threaded interface• Multiple O-ring design seals for moisture protection• Anti-Twist design allows for easy installation without

housing disassembly• Color coded 2mm jacketed or 900um breakout• Accommodates Single Mode or Multimode fiber• ONFR or armored cable constructions available• Available with most industry standard connectors

Applications:• CATV Distribution Nodes• Optical Transport and processing equipment

The Global Service Centre for Cell Site SolutionsCustom OSP Cable Assemblies

Customized Cable Assemblies• Factory Terminated Cable Assemblies• Specific cable size and constructions

• Indoor/outdoor, Armored, ONFR, LSZH, CLT, Distribution, Breakout

• Custom furcation and breakout lengths• Custom marking or labeling• Specific lengths and tolerances can be defined• Most industry standard connectors are available• Optional hardware can be installed

• Pulling Eyes, Cable Clamps, Sealing Glands

Applications:• Datacomm• Telecomm• Industrial• Campus

The Global Service Centre for Cell Site SolutionsR2CT Field Installable Connector

The R2CT Field Installable Weatherproof Cable Gland is designed as a cost effective means of providing a removable interface for applications requiring protection from wet or dirty environments

Features:

• Field Installable

• Compatible with Optical LC or Copper RJ45

• IP-65 water and dust sealed interface when

fully mated or dust caps installed

• Dual Sourced – Licensed from Radiall

• Corrosion resistant aluminum housing

• Plug dust cap with pulling eye protects

connectors during installation

Mated Plug and Receptacle with Optical LC Cable Assembly

Plug Kit (Field Install Assembly) Receptacle

The Global Service Centre for Cell Site SolutionsTxRx Direct Pluggable Outdoor Assemblies

• Common housing for Optical LC and Copper RJ-45 interconnect

• Allows direct connection to commercially available SFP (LC Duplex) transceivers or RJ-45 jacks, no internal jumper needed

• Optical SFP attaches to cable assembly for installation and use ensuring optimal reliability

• Factory terminated optical Assemblies• Factory or field terminated RJ-45

assemblies• Designed for Outdoor applications with

IP67 dust and water ingress protection and corrosion resistance

• Available for Single mode or Multimode optical cable and Cat 5, Cat 5E, or Cat 6 copper cabling

• Design seals both connection interface and coupling region preventing moisture or ice from forming within the latching area

Optical Duplex LC Copper RJ-45

The Global Service Centre for Cell Site SolutionsDemarcation Options

Enclosures:

• Can be provided empty (breadboard style back panel) or populated with cable routing, splice trays, power distribution, and adapter plates.

Potted Breakout Assemblies:

• Outdoor rated and can be customized to the cable and breakout requirements needed. Available for fiber or hybrid cable applications.

In-Line Demarcation

• Compact sealed plastic housing with form fitting grommet.