Topics- Opening, Keynote Lectures, Technical Sessions, Coffee Breaks, Lunches, Closing TIME

Opening Session , Monday May 16, 8.00 AM - 8.30 AM, Room - Oakes Grand Ballroom 8.00 AM - 8.30 AM

Keynote Lectures, Monday May 16, 8.30 AM - 10.00 AM , Room - Oakes Grand Ballroom 8.30 AM -10.00 AM

Morning Coffee Break , Monday 16, 10.00 AM -10.30 AM; Room - Oakes Foyer 10.00 AM - 10.30 AM

Oral Session S-01 MM: PM Machines; Monday May 16 ;Session Chair: M.A. Masrur: Room-Oakes South

76199 Fuzzy Logic Based Speed Controller and Adaptive Hysteresis Current Controller Based 10.30 - 10.55 AM

IPMSM Drive for Improved Dynamic Performance Mohammad Nasir Uddin;

Ronald S. Rebeiro

82357 Cross-Saturation Effects on Position Estimation Using BEMF Methods in PMAC 10.55-11.20 AM

Machines Sinisa Jurkovic; Elias Strangas

82417 Dynamic Evaluation of the Overloading Potential of a Convection Cooled 11.20 - 11.45 AM

Permanent Magnet Synchronous Motor Francisco Márquez-Fernández; Avo Reinap;

Zhe Huang; Mats Alaküla

82509 Single Phase Line-Start High Efficiency Interior Permanent Magnet Motors 11.45 - 12.10 Noon

Hossan Mohammad Zubayer; A. Osheiba; Kazumi Kurihara; Kai Wang; Mohammed Abdul

Jabbar; Aziz Rahman; Md. Ashraful Hoque

82601 Design of Permanent Magnet Synchronous Machine in Order to Reduce Noise 12.10 - 12.35 Noon

Under Multi-physic Contraints Nicolas Bracikowski; Dan Ilea; Frederic Gillon; Michel

Hecquet; Pascal Brochet

82639 Surface Permanent Magnet Machine Self-Sensing At Zero and Low Speeds Using 12.35 - 1.00 PM

Improved Observer for Position, Velocity, and Disturbance Torque Estimation Shih-Chin

Yang; Robert D. Lorenz

Oral Session S-02 MM: Motors/Generators ;Monday May 16, Session Chairs: D.Kankam-NASA/H.Toliyat-TAMU; Room-Salon A

76143 Analytical Determination of Optimal Split Ratio for Overlapping & Non-overlapping 10.30-10.55 AM

Winding External Rotor PM Brushless Machines Y. Shen; Z.Q. Zhu; L. Wu

87057 Eddy Current Investigation Study for a Non-Conventional Flux Concentrated Permanent 10.55-11.20 AM

Magnet Transverse Flux Machine Using Finite Element Method Via 3D Transient Approach

Salwa Baserrah; Bernd Orlik

74129 Principle of Hybrid Variable-Magnetic-Force Motors Kazuto Sakai 11.20 - 11.45 AM

75303 New Collaborative Design Platform for Developing Energy Efficient Electric Motors 11.45 - 12.10 Noon

Claudio Favi; M. Germani; M. Marconi; M. Mengoni; A.Tirabassi

73175 A Novel 24-Slots/10-Poles Winding Topology for Electric Machines 12.10 - 12.35 Noon

Gurakuq Dajaku; Dieter Gerling

78565 Control Strategy of Magnetic Suspension and Performances of a Bearingless BLDC Motor 12.35 - 1.00 PM

Masahide Ooshima; Aziz Rahman

Oral Session S-03 MM: Miscellaneous Applications; Monday May 16; Session Chair: M.El-Sharkawi; Room-Hennepin North

76915 An Electromechanical Coupling Model for an Inclined Drum Washing Machine 10.30-10.55 AM

Vibration System Based on Euler-Lagrange Theory Zheng Zeng; Huan Yang; Xiang Rong Zhao;

Qing Sheng Tang; Chen LI

76197 Influence of Turning on the Magnetic Properties of Electrical Steel in the Production of 10.55-11.20 AM

Electrical Machines Andreas Boehm; Ingo Hahn

82827 DC-Bus Voltage Control for Hybrid 4-Port High Frequency Parallel-Connected Sustainable 11.20 - 11.45 AM

Energy Conversion System Mahmoud Amin; Osama Mohammed

76399 Development of New Smart Power Module for Home Appliances Motor Drive Applications 11.45 - 12.10 Noon

TaeSung Kwon

76527 Accelerated Electromechanical Dynamic Modelling of a Distributed Generation Power Pack 12.10 - 12.35 Noon

Christopher I Hill; Pericle Zanchetta; Serhiy Bozhko

76619 Direct Torque Control Stability Conditions and Compensation Methods 12.35 - 1.00 PM

Veysel Buyukdegirmenci; Krein Philip T.

Oral Session S-04 MM: Modeling; Monday May 16; Session Chair: Nick Stranges - GE Canada; Room - Oakes NW

82239 Electromagnetic Losses Computation in Existing Large Hydro Electrical Generators 10.30-10.55 AM

Arezki Merkhouf; Claude Hudon; Mario Bélec; Eilin Guillot; Ana B.M. Aguiar; Kamal Al-Haddad

72687 An Analytical Model and Parameter Computation for Universal Motors 10.55-11.20 AM

Dingsheng Lin

76131 Analytical Modeling and Investigation of Transient Response of PM Machines with 3-Phase 11.20 - 11.45 AM

Short-Circuit Fault Wenqiang Chu; Zi Qiang Zhu

76193 Modeling of PMSM with Multiple Saliencies Using a Stator-Oriented Magnetic Circuit 11.45 - 12.10 Noon

Approach Markus Seilmeier; Bernhard Piepenbreier

76391 Modelling and Dynamic Performance of a Direct-Drive Direct-Grid Slip Permanent Magnet 12.10 - 12.35 Noon

Wind Generator Pieter Bouwer; Johannes Potgieter; Maarten Kamper

84723 A Review on Inductive Charging for Electric Vehicles Hunter Wu 12.35 - 1.00 PM

Oral Session S-05 MM: Control; Monday May 16; Session Chair: M. Pande- Rockwell Automation; Room - Oakes NE

84207 Experimental Estimation of a 5-axis Active Control Type Bearingless Canned 10.30-10.55 AM

Motor Pump Naoto Yamamoto; Masatsugu Takemoto; Satoshi Ogasawara; Masao Hiragushi

82483 Control of a Multi-Motor Drive Based on Five-Phase Tubular PM Actuators for 10.55-11.20 AM

Positioning Systems Luca Zarri; Michele Mengoni; Angelo Tani; Giovanni Serra; Yasser Gritli;

Fiorenzo Filippetti

81051 Comparative Study of Speed Estimation Techniques for Sensorless Vector Control of 11.20 - 11.45 AM

Induction Machine Mamadou Lamine Doumbia

81273 Study and Application of Fuzzy PID Control-Based for FFU Motor Speed Regulation Control 11.45 - 12.10 Noon

System Wang Yiwang; Cao Fengwen

75447 Real Time Performance Investigation of an Intelligent Controller Based Speed Control of 12.10 - 12.35 Noon

Induction Motor Drives M. Abdesh Khan; Mohammad Nasir Uddin; Aziz Rahman

82167 New Scalar Control for Full Speed Operating Range IM Drives Alfio Consoli; Giacomo 12.35 - 1.00 PM

Scelba; Giuseppe Scarcella; Mario Cacciato

Buffet Lunch, Monday May 16, 1.00 - 2.00 PM , Room - Oakes Grand Ballroom 1.00 PM -2.00 PM

Poster Session, PS-01, Monday May 16, 2.00 PM -3.00 PM ; Room- Hennepin South 2.00 PM - 3.00 PM

Afternoon Coffee Break , Monday May 16, 3.00 PM - 3.30 PM , Room - Oakes Foyer 3.00 PM -3.30 PM

Oral Session S-06 MA: PM Machines; Monday May 16; Session Chair: H. Karmaker -TECO-Westinghouse; Room - Oakes NE

75731 Benchmarking of a High-Speed Permanent Magnet Machine 3.30-3.55 PM

Delvis Gonzalez-Lopez

75997 High Torque Density Low Speed Permanent Magnet Machine Stéphane Mouty; 3.55-4.20 PM

Abdollah Mirzaian; Frédéric Gustin; Alain Berthon; Daniel Depernet; Espanet Christophe

76017 Inductance Calculations for PM Machines with Concentrated Windings Tim 4.20 - 4.45 AM

Strous; Henk Polinder; Braham Ferreira

76271 Effects of Cogging Torque Due to Amount of Stator Slot in Permanent Magnet 4.45 - 5.10 PM

Generator Using Finite Element Analysis Hew Wooi Ping; Yin Keet Wong

76313 Magnetic Circuit Analysis of Permanent-Magnet-Assisted Salient-Pole 5.10 - 5.35 PM

Synchronous Machines Under Steady States Tatsuya Hosoi; Kazuo Shima; Tadashi Fukami

5.35 - 6.00 PM

Oral Session S-07 MA: Motors/Generators; Monday May 16; Session Chair: Steven Englebretson- ABB; Room - Oakes NW

75765 Torque Ripple Estimation and Minimisation Independent of Sensor Type. Damien Hill; 3.30-3.55 PM

Greg Heins; Friso DeBoer; Benjamin Saunders

75781 Effect of Stress on Iron Loss of Motor Core Norio Takahashi; Daisuke Miyagi 3.55-4.20 PM

76715 Inductor Current Feedback Control Based Active Damping for High Power PWM Current 4.20 - 4.45 AM

Source Rectifier Fangrui Liu; Bin Wu; Navid Reza Zargari; Manish Pande

76871 Force Ripple Compensation in a Tubular Linear Generator for Marine Renewable Generation 4.45 - 5.10 PM

Alex Ridge; Peter Clifton; Richard McMahon; Hugh-Peter Kelly

77967 Power & Energy Ratings Optimization in a Fast-Charging Station for PHEV Batteries 5.10 - 5.35 PM

Makram de Freige; Michael Ross; Geza Joos; Maxime Dubois

68634 Motors/Generators for Traction /Propulsion Applications Ayman El-Refaie 5.35 - 6.00 PM

Oral Session S-08 MA: Miscellaneous Applications; Monday May 16; Session Chair: M.Uddin- Lakehead; Room - Salon A

79071 Experimental Emulation of Stator Turn Insulation Breakdown During a Surge Test Stefan 3.30-3.55 PM

Grubic; Ronald Harley; Thomas G. Habetler; Jose Restrepo

79821 5-Level Parallel Current Source Inverter for High Power Application with DC Current Balance 3.55-4.20 PM

Control Navid Binesh

80315 A Novel Multi-String Five-Level PWM Inverter for Photovoltaic Application Nasrudin Abdul Rahim; 4.20 - 4.45 AM

Jeyraj Selvaraj

80399 Heat and Fluid Flow Analysis of an Internal Permanent Magnet Synchronous Machine by 4.45 - 5.10 PM

Means of Computational Fluid Dynamics Christian Jungreuthmayer; Thomas Bäuml; Oliver Winter;

Martin Ganchev; Hansjörg Kapeller; Anton Haumer; Christian Kral

80857 Low Cost Inverter Topologies for Extended Torque Speed Characteristics of Spindle Motor 5.10 - 5.35 PM

Pvrl Narasimham; Avrs Sarma; E Vargil Kumar

81101 Parallel and Flux Forced Windings in Discontinuous Machines Jeff Proverbs; Tom Cox; 5.35 - 6.00 PM

John Eastham

Oral Session S-09 MA: Modeling; Monday May 16; Session Chair: M. Toliyat- Texas AMU,; Room - Hennepin North

76419 Modelling and Precalculation of Additional Losses of Inverter Fed Asynchronous Induction 3.30-3.55 PM

Machines of Traction Drives Erich Schmidt

76807 Modelling and Field Orientated Current Control of a Two-Star 6-Phase IPMSM for Gearless 3.55-4.20 PM

Wheel Drives Rinaldo Arnold; Vinzenz V. Haerri

78417 A Transient 2D Model of an Electrodynamic Wheel Moving Above a Conductive Guideway 4.20 - 4.45 AM

Nirmal Paudel; Jonathan Z. Bird; Subhra Paul; Dheeraj Bobba

80213 Modeling and Characterizing the Inter-Turn Short Circuit Fault in PMSM Babak Vaseghi; 4.45 - 5.10 PM

Abdesslem Djerdir

80799 A Design-Oriented Model of Doubly-Fed Induction Machine Nicola Bianchi; Luigi Alberti; 5.10 - 5.35 PM

Silverio Bolognani

75387 Model Reference Adaptive Control of Five-phase IPM Motors Based on Neural 5.35 - 6.00 PM

Network Lusu Guo; Leila Parsa

Oral Session S-10 MA: Faults and Miscellaneous; Monday May 16; Session Chair: D. Panda,Trans -Coil; Room - Oakes South

82735 Intelligent Speed Control of Interior Permanent Magnet Motor Drives Using a 3.30-3.55 PM

Single Untrained Artificial Neuron Casey Butt , M.A. Rahman

71845 Induction Motor Condition Monitoring: Vibration Analysis Technique - A Practical 3.55-4.20 PM

Implementation Mikhail Tsypkin

77095 Operating Limits for Drive Condition Monitoring Using Supply Current Signature Analysis 4.20 - 4.45 AM

Jing Li; Mark Sumner; Jesus Arellano-Padilla; Greg Asher

76147 Exploiting Switching Transients for Broken Rotor Bar Detection in Inverter-Fed Induction 4.45 - 5.10 PM

Machines At All Operating Conditions Thomas M. Wolbank

84691 Advanced Diagnosis of Broken Bar Fault in Induction Machines by Using Discrete Wavelet 5.10 - 5.35 PM

Transform Under Time-varying Condition Yasser Gritli; Claudio Rossi; Luca Zarri; Fiorenzo Filippetti;

Abderrazak Chatti; Domenico Casadei; Andrea Stefani

80763 Rotor Position Estimation in IPM Motor Drives Based on PWM Current Harmonics 5.35 - 6.00 PM

Silverio Bolognani; Adriano Faggion; Luca Sgarbossa

Keynote Lecture, Tuesday May 17, 8.30 AM- 10 AM , Room - Oakes Grand Ballroom 8.30AM - 10.00AM

Morning Coffee Break , Tuesday May 17, 10.00 AM - 10.30AM; Room - Oakes Foyer 10.00AM -10.30AM

Oral Session S-11 TM: Sensorless Control; Tuesday May 17; Session Chair: D. Lin, ANSYS ; Room - Oakes South

69556 Design and Analysis of a Sensorless Sliding Mode Flux Observer for Induction Motor Drives 10.30 - 10.55 AM

Mihai Comanescu

75891 A Fast Response Speed Control for IPMSM Position Sensorless Control Using Direct-Type 10.55-11.20 AM

Adaptive-Observer Masaru Hasegawa; Hiroki Yamauchi; Keiju Matsui

76207 Current Observer Based Position Estimation Using the Stationary Frame Equivalent of a 11.20 - 11.45 AM

Synchronous Frame PI Regulator for PMSM Sensorless Drives Hongrae Kim; Mahshid Amirabadi;

Steven Englebretson; Waqas Arshad

79677 Robust ANN-Based Nonlinear Speed Observer for Permanent Magnet Synchronous Machine 11.45 - 12.10 Noon

Drives Hicham Chaoui; Pierre Sicard

80733 Sensorless Capability of Fractional-Slot Surface-Mounted PM Motors Adriano Faggion; 12.10 - 12.35 Noon

Emanuele Fornasiero; Nicola Bianchi; Silverio Bolognani

84929: Sensorless Control of Permanent Magnet Synchronous Motor Using ANFIS Based MRAS 12.35 - 1.00 PM

Manu Jain, Mukhtiar Singh, Ambrish Chandra, Sheldon S Williamson

Oral Session S-12 TM: Motors/Generators; Tuesday May 17; Session Chair: Tim Strous-Delft ; Room - Salon A

76425 Simulation of Steady-State and Transient Operational Behaviour of Variable-Speed Motor- 10.30 - 10.55 AM

Generators of Hydro Power Plants Erich Schmidt

83325 Design and Optimization of Concentric Saddle Shaped Coils for Permanent 10.55-11.20 AM

Magnet Transverse Flux Machine in Segmented Construction Salwa Baserrah; Bernd Orlik

77293 New Approach to Cogging Torque Simulation Using Numerical Functions SeyedAmin 11.20 - 11.45 AM

Saied; Karim Abbaszadeh; Alberto Tenconi; Silvio Vaschetto

79061 Sensitivity Analysis of the Surge Test Applied to AC Machines Stefan Grubic; Ronald 11.45 - 12.10 Noon

Harley; Thomas G. Habetler; Jose Restrepo

80551 Modern PWM Drives and High Speed Machines Marc Schöning 12.10 - 12.35 Noon

82685 Inter-turn Fault Modeling of a Variable Speed PM Wind Generator Using Physics-based 12.35 - 1.00 PM

Approach Osama Mohammed

Oral Session S-13 TM: Miscellaneous Applications; Tuesday May 17; Session Chair:J. Shek - Nottingham; Room -Hennepin North

75849 A Novel Concept of a Single-Drive Bearingless Motor Juinchi Asama 10.30 - 10.55 AM

81191 Modeling of Power System Dynamic Devices Incorporated in Dynamic Computation for 10.55-11.20 AM

Power Systems (DCPS) for Transient Stability Analysis Norazlan Hashim; Ngah Ramzi Hamzah;

Pauziah Mohd Arsad; Rahimi Baharom; Nik Fasdi Nik Ismail; Norziana Aminudin; Dalina Johari;

Ahmad Adib Sallehhudin

81281 Design and Realization of Group Control System for FFU Based on ZigBee Wireless Sensor 11.20 - 11.45 AM

Network Wang Yiwang; Cao Fengwen

81317 Design Guideline of DC Distribution Systems for Home Appliances: Issues and Solution 11.45 - 12.10 Noon

Joon-Young Jeon; Jong-Soo Kim; Gyu-Yeong Choe; Byoung-Kuk Lee; Hyun-Cheol Jin; Jin Hur

81407 Issues with the Design of Brushless Doubly-Fed Reluctance Machines: Unbalanced 12.10 - 12.35 Noon

Magnetic Pull, Skew and Iron Losses David Dorrell; Andrew M Knight; Robert Betz

81475 Continued Operation of Delta-connected Ac Motor-drive Systems Under Short-circuit Fault 12.35 - 1.00 PM

Ahmed Sayed-Ahmed; Behrooz Mirafzal; Nabeel Demerdash

Oral Session S-14 TM: Modeling; Tuesday May 17; Session Chair: - Bin Wu , Ryerson Univ : Room - Oakes NW

81985 Time Discretization Issues in Induction Machine Model Solving for Real-time Applications 10.30 - 10.55 AM

Bhakti Joshi; Mukul Chandorkar

83259 Modeling of Nine-Phase Interior Permanent Magnet Machines (IPM) Including Harmonic 10.55-11.20 AM

Effects Amrit Gautam; Sosthenes Karugaba; Ojo Joseph

82677 Development of Transient FE-Physics-Based Model of Induction for Real Time Integrated 11.20 - 11.45 AM

Drive Simulations Osama Mohammed

82877 Finite Element Analysis, Modeling and Torque Distribution Control for Switched Reluctance 11.45 - 12.10 Noon

Motors with High Non-linear Inductance Characteristics Cao-Minh Ta

82595 Modeling and Experimental Validation of a Fault Mitigation Method in Induction 12.10 - 12.35 Noon

Motor-Drive Systems Using a Magnetic Equivalent Circuit Shaohua Suo; Gennadi Sizov;

Ahmed Sayed-Ahmed; Nabeel Demerdash

81851 A General Mathematical Model for Non-Redundant Fault-Tolerant Inverters 12.35 - 1.00 PM

Fabio Genduso; Rosario Miceli

Oral Session S-15 TM: Wind Energy; Tuesday May 17; Session Chair: Jie Chang - Eaton Corporation: Room - Oakes NE

76679 A Novel Decoupled Interconnecting Method for Current Source Converter Based Offshore 10.30 - 10.55 AM

Wind Farms Mitesh Popat; Bin Wu; Navid Reza Zargari

77079 Analytical and FE Calculation of Eddy-current Losses in PM Concentrated Winding Machines 10.55-11.20 AM

for Wind Turbines A.K. Jassal

88423 Development of Optimal Controllers for a DFIG Based Wind Farm in a Smart Grid 11.20 - 11.45 AM

Under Variable Wind Speed Conditions Priyam Chakravarty;

Ganesh Kumar Venayagamoorthy

78111 Different Torque Ripple Reduction Methods for Wind Energy Conversion Systems Using 11.45 - 12.10 Noon

Diode Rectifier and Boost Converter Yuanye Xia; Khaled Ahmed; Barry Williams

80815 Energy Yield of Two Generator Systems for Small Wind Turbine Application Samuel Ani; 12.10 - 12.35 Noon

Henk Polinder; Braham Ferreira

81013 Direct Torque Control of Cascaded Brushless Doubly Fed Induction Generator for 12.35 - 1.00 PM

Wind Energy Applications Yongchang Zhang; Jianguo Zhu

Buffet Lunch, Tuesday May 17, 1.00 PM to 2.00 PM; Room: Oakes Grand Ballroom 1.00 - 2.00 PM

Poster Session PS-02, Tuesday May 17, 2.00-3.00 PM; Room - Hennepin South 2.00 - 3.00 PM

Afternoon Coffee Break, Tuesday 17, 3.00PM - 3.30 PM ; Room- Oakes Foyer 3.00 - 3.30 PM

Oral Session S-16 TA: PM Machines; Tuesday May 17; Session Chair: T.Sebastian - Nexteer Automotive; Room - Oakes NE

75429 Experimental Verification of Core and Magnet Losses in a Concentrated Wound IPM 3.30-3.55 PM

Machine with V-Shaped Magnets Used in Field Weakening Applications Lester Chong; Rukmi Dutta;

M. Fazlur Rahman; Howard Lovatt

76611 Evaluation of an External Rotor Synchronous Line-Start Permanent Magnet Single Phase 3.55-4.20 PM

Motor Flavio Kalluf; Cristofaro Pompermaier; Aleandro Espindola;

Mauricio Valencia Ferreira da Luz

80539 Design Procedure of IPM Motor Drive for Railway Traction Massimo Barcaro; 4.20 - 4.45 AM

Enamuele Fornassiero;Nicola Bianchi; Silverio Bolognani

80713 Torque Ripple Compensation Based on Instantaneous Torque Estimation in Permanent 4.45 - 5.10 PM

Magnet Synchronous Motors Noriya Nakao; Kan Akatsu

76109 Optimal Torque Matching of a Magnetic Gear Within a Permanent Magnet Machine 5.10 - 5.35 PM

David Evans; Zi Qiang Zhu

82687 Influence of Design Parameters on Wide Speed Range Concentrated Winding 5.35 - 6.00 PM

PM Machines Shah Rahman; Andrew M Knight

Oral Session S-17 TA: Converters; Tuesday May 17; Session Chair: Dieter Garling, FEAAM, Germany ; Room - Oakes NW

75413 High-Frequency AC Drive Fed by One-Stage VF-Input AC-AC Converter 3.30-3.55 PM

Jie Chang

76783 Modular Multilevel Converter for Medium-Voltage Applications Grain Philip Adam; 3.55-4.20 PM

Khaled Ahmed

76853 Analysis of a Railway Power System Based on Four Quadrant Converters Operating Under 4.20 - 4.45 AM

Faulty Conditions Andre Mendes; Ricardo Rocha; Antonio J. Marques Cardoso

76873 A Quadratic High Step-Up DC-DC Converter with Voltage Multiplier 4.45 - 5.10 PM

Shih-Ming Chen; T. J. Liang; Lung-Sheng Yang; Jiann-Fuh Chen; Kai-Cheung Juang

80501 A Novel Integrated AC Choke for Common-mode Voltage Suppression in Power Converter 5.10 - 5.35 PM

Systems Ning Zhu; Jinsong Kang; David Xu; Bin Wu; Yuan Xiao

80651 Optimized PID Controller for Both Single Phase Inverter and MPPT SEPIC DC/DC Converter 5.35 - 6.00 PM

of PV Module Ahmad El Khateb; Nasrudin Abdul Rahim; Jeyraj Selvaraj

Oral Session S-18 TA: Induction Machines; Tuesday May 17; Session Chair: Marc Schoning - Elektromachinen; Room - Salon A

81049 Methodology and Experimental Set-Up for DSP-Based Sensorless PWM Speed Estimation of 3.30-3.55 PM

Induction Machine Mamadou Lamine Doumbia

74067 A PWM Harmonics Elimination Method in Simultaneous Estimation of Magnetic Field 3.55-4.20 PM

and Displacements in Bearingless Induction Motors Akira Chiba

75957 Derating Factors for Direct Online Induction Machines When Supplied with Voltage 4.20 - 4.45 AM

Harmonics: A Critical View Colin Debruyne; Jan Desmet; Lieven Vandevelde; Stijn Derammelaere

4.45 - 5.10 PM

76465 Analytical Calculation of Electrodynamic Levitation Forces in a Special-Purpose Linear 5.10 - 5.35 PM

Induction Motor Jacek F Gieras; Zdzislaw Gientkowski; Jacek Mews

82529 Diagnosis and Isolation of Air-gap Eccentricities in Closed-loop Controlled 5.35 - 6.00 PM

Doubly-Fed Induction Generators Vivek M Sundaram; Hamid Toliyat

Oral Session S-19 TA: Control; Tuesday May 17; Session Chair: Ayman El-Refaie, GE (R & D) , Schenectady,; Room - Hannepin North

62296 Periodic Disturbance Rejection of a PMSM with Adaptive Control Algorithms 3.30-3.55 PM

Sebastian Maier

82459 Construction and Control of an Air-Cored Permanent Magnet Linear Generator for 3.55-4.20 PM

Direct Drive Wave Energy Converters Rieghard Vermaak; Maarten Kamper

69546 Ideal Integration of Observers with Sinusoidal States by Sliding Mode - Application to Direct 4.20 - 4.45 AM

Field Orientation of Motor Drives Mihai Comanescu

73823 Implementation of Emotional Controller (BELBIC) for Synchronous Reluctance Motor Drive 4.45 - 5.10 PM

Ehsan Daryabeigi; Hossein Abootorabi Zarchi; Gholam Reza Arab Markadeh; Aziz Rahman; Caro Lucas

75863 Comparative Study of PMSM Drive Systems Based on Current Control and Direct 5.10 - 5.35 PM

Torque Control in Flux-weakening Control Region Yukinori Inoue; Shigeo Morimoto;

Masayuki Sanada

75723 Two-level Backward Operation of a VSMC for PMSG Grid-connected Variable 5.35 - 6.00 PM

Speed Wind Turbine Systems Mohamed F Aner; Ed Nowicki

Oral Session S-20 TA: Wind Energy; Tuesday May 17; Session Chair: Dan Ionel - Marquettee Univ; : Rooom - Oakes South

81345 Robust Decoupling Strategy for Speed Control of Permanent Magnet Synchronous 3.30-3.55 PM

Generator in Wind Energy Conversion Systems Adel Merabet; Jogendra Singh Thongam;

Alireza Safaee

81845 Torque/Power Rating Design of an IPM Machine for Maximum Profit-To-Cost Ratio in Wind 3.55-4.20 PM

Power Generation Mattia Morandin; Emanuele Fornasiero; Silverio Bolognani;

Nicola Bianchi

82003 Performance Evaluation of Grid Connected Wind Energy Conversion Systems with 4.20 - 4.45 AM

Five-phase Modular Permanent Magnet Synchronous Generators Ayman Abdel-Khalik;

Khaled Ahmed

82191 Induction Generators for Direct-Drive Wind Turbines Matthew Henriksen; 4.45 - 5.10 PM

Bogi Jensen

82363 State of the Art in Generator Technology for Offshore Wind Energy Conversion Systems 5.10 - 5.35 PM

Zhaoqiang Zhang; Alexey Matveev

82437 A Novel Control Strategy of an Active Crowbar for DFIG-Based Wind Turbine During Gird 5.35 - 6.00 PM

Faults Yuan Ren; Wei Zhang

Keynote Lecture, Wednesday, May 18, 8.30AM - 10.00AM; Room- Oakes Grand Ballroom 8.30 AM - 10.00 AM

Morning Coffee Break,Wednesday May 18, 10.00AM - 10.30 AM; Room - Oakes Foyer 10.00 AM -10.30 AM

Oral Session S-21 WM: PM Machines; Wednesday May 18; Session Chair: S. Kuznetsov, Power Supercon.; Room-Oakes South

81549 Loss Study of a Novel Axial Flux Permanent Magnet Machine Trong Duy Nguyen; 10.30 - 10.55 AM

King Jet Tseng; Chi Zhang; Shao Zhang

82323 Constrained Online Efficiency Optimization to Guarantee Load Support in Motor 10.55-11.20 AM

Drives Ali Bazzi; Krein Philip T.

81611 A Brushless DC Motor Design for an Aircraft Electro-Hydraulic Actuation System 11.20 - 11.45 AM

Xiaoyan Huang; Chris Gerada; Andrew Goodman; Keith Bradley; He Zhang; Youtong Fang

84501 Initial Experimental Verification of a Compact Permanent Magnet Transverse Flux Machine 11.45 - 12.10 Noon

in a Sector Configuration Salwa Baserrah; Bernd Orlik

84923 Performance Evaluation of Brushless DC Permanent Magnet Motor Using Finite Element 12.10 - 12.35 Noon

Method Thiago Hideki Akinaga; Cristofaro Pompermaier; Flavio Kalluf;

Mauricio Valencia Ferreira da Luz

84979 Evaluation of Inductance in a Permanent Magnet Synchronous Motor 12.35 - 1.00 PM

Abraham Gebregergis, Mohammad Islam, Tomy Sebastian and Raja Ramakrishnan

Oral Session S-22 WM: Motors/Generators; Wednesday May 18; Session Chair: M. Ooshima, TUS, Japan ; Room - Hennepin North

74069 New Phase Estimation Methods Dedicated to High-Frequency Voltage Injections for 10.30 - 10.55 AM

Sensorless PMSM Drives Shinji Shinnaka

75985 Optimised Segmental Rotor Switched Reluctance Machines with a Greater Number of Rotor 10.55-11.20 AM

Segments Than Stator Slots James Widmer; Barrie Mecrow

72539 Development of an Efficient Photo Voltaic Maximum Power Point Tracking Controller 11.20 - 11.45 AM

Subiyanto Subiyanto; Azah Mohamed; M. A. Hannan

82199 EMF and Efficiency Measurements of a Novel Self-Excited Reluctance Generator 11.45 - 12.10 Noon

Kazumi Kurihara

74961 Harmonic Impact of Different Distributed Generation Units on Low Voltage Distribution 12.10 - 12.35 Noon

System Aida Fazliana Abdul Kadir; Azah Mohamed; Hussain Shareef

75031 Modal Analysis of Operational End Winding Vibrations Christian Kreischer; Stefan Kulig; 12.35 - 1.00 PM

Dagmar Thien

Oral Session S-23 WM: Miscellaneous Applications, Wednesday May 18; Session Chair: S.S.Nair- TVS Motor; Room -Salon A

82527 Active Reduction of Audible Noise Exciting Radial Force-Density Waves in Induction Motors 10.30 - 10.55 AM

David Franck; Michael van der Giet; Kay Hameyer

82473 A Three-level Five-phase Space-vector Modulation Algorithm Based on the Decomposition 10.55-11.20 AM

Method Martin Jones; Wahyu Satiawan; Emil Levi

82615 Multiphysic Design Rules Applied to Inductors or Transformers for Railway Application 11.20 - 11.45 AM

Mathieu Rossi; Michel Hecquet; Vincent Lanfranchi

76297 Novel Equipment for the Measurement of Core Losses in Laminations for Advanced 11.45 - 12.10 Noon

Machines Maged Ibrahim; Pragasen Pillay

85023 Modelling of a Magnetic Gear Considering Rotor Eccentricity Leandro Percebon; 12.10 - 12.35 Noon

Rodrigo Ferraz; Mauricio Valencia Ferreira da Luz

86677 Full Bridge Rectifier Generating Mode of a 30/20-pole Hybrid Excitation Doubly Salient 12.35 - 1.00 PM

Machine Zhihui Chen; Yangguang Yan

Oral Session S-24 WM: Control; Wednesday May 18 ; Session Chair:A. Khan, Huskey Injection Molding; Room - Oakes NE

75457 A New Direct Torque Control for AC Motors with Over Modulation Ability Ahmad Ghaderi; 10.30 - 10.55 AM

Masaru Sugai; Takaji Umeno; Yasushi Amano

75555 Field-Weakening Method for V/f-Controlled Hoist Drive Janne Salomäki; 10.55-11.20 AM

Mikko Porma

76069 Eliminating All Machine Parameters in Encoderless Predictive Torque Control Without 11.20 - 11.45 AM

Signal Injection Peter Landsmann; Christoph Hackl; Ralph Kennel

76145 Inverter Synchronization Control with Internal Model Principle Yongpeng Zhang; 11.45 - 12.10 Noon

Chao Xia; Jian Zhang; Liping Guo

70333 Analysis and Optimization of a Modular Stator Core with Segmental Teeth and 12.10 - 12.35 Noon

Solid Back Iron for PM Electric Machines Jianxin Shen; Canfei Wang; Dongmin Miao;

Mengjia Jin; Dan Shi; Yunchong Wang

76335 Algebraic Design of Full-Order Flux Observer for IPMSM Position Sensorless Control 12.35 - 1.00 PM

Atsushi Matsumoto; Masaru Hasegawa; Mutuwo Tomita; Keiju Matsui

Oral Session S-25 WM: Electric Vehicle; Wednesday May 18; Session Chair: A. Rahim -UMPEDAC, MY; Room - Oakes NW

75715 Novel Multi-Mode Single Leg Converter for Hybrid Electric Vehicles Taesik Park; 10.30 - 10.55 AM

Taehyung Kim

76609 The Effect of Electric Vehicle Drive Efficiency on Bidding Vehicle-to-Grid Services

Eric Sortomme; Edward Doheny; Mohamed El-Sharkawi 10.55-11.20 AM

80417 Comparison of Integrated Battery Chargers for Plug-In Hybrid Electric Vehicles: Topology

and Control Dong-Gyun Woo; Gyu-Yeong Choe; Jong-Soo Kim; Byoung-Kuk Lee; Jin Hur; 11.20 - 11.45 AM

Gu-Bae Kang

80523 Comparative Evaluation of 6/8 and 6/10 Switched Reluctance Machines for Traction

Application in Plug-in Hybrid Electric Vehicles Berker Bilgin; Ali Emadi; 11.45 - 12.10 Noon

Mahesh Krishnamurthy

80765 Life Expectancy Calculation for Electric Vehicle Traction Motors Regarding Dynamic 12.10 - 12.35 Noon

Temperature and Driving Cycles Richard Rothe; Kay Hameyer

75983 Fault Tolerant In-Wheel Motor Topologies for High Performance Electric Vehicles 12.35 - 1.00 PM

Chukwuma Ifedi; Barrie Mecrow; Simon Brockway; Gerry Boast; Glynn Atkinson;

Dragica Kostic-Perovic

Buffet Lunch , Wednesday May 18, 1.00- 2.00 PM ; Room- Oakes Foyer 1.00 - 2.00 PM

Poster Session , PS-03, Wednesday May 18, 2.00 - 3.00 PM; Room - Hennepin South 2.00 - 3.00 PM

Afternoon Coffee Break : Wednesday May 18, 3.00 - 3.30 PM; Room - Oakes Foyer 3.00 - 3.30 PM

Oral Session S-26 WA: PM Machines; Wednesday May 18; Session Chair: T. Ishikawa, Gunma Univ.. Japan; Room - Oakes NE

85013 Design and Performance of a Double-Layered Interior Permanent Magnet 3.30-3.55 PM

Generator Saleh Saleh; Hossan Mohammad Zubayer; Mohammad Iqbal;

M. Abdesh Khan; Aziz Rahman

85029 Multi-Objective Optimization of PM AC Machines Using Computationally Efficient 3.55-4.20 PM

- FEA and Differential Evolution Gennadi Sizov; Dan Ionel; Nabeel Demerdash

85041 Pseudo-vector Control - an Alternative Approach for Brushless DC Motor Drives 4.20 - 4.45 AM

Cao-Minh Ta

86479 Extending Speed Range of Five-Phase PM Machines by Changing the Stator 4.45 - 5.10 PM

Windings Connections Siavash Sadeghi; Leila Parsa; Toliyat Hamid A.

86853 Torque Improvement of Single Phase Brushless PM Motors by Auxiliary Magnets 5.10 - 5.35 PM

Mauro Andriollo; Giovanni Martinelli; Andrea Tortella

75431 Failure Diagnosis of Brushless DC Motor with Rotor Magnet Defect 5.35 - 6.00 PM

Takeo Ishikawa

Oral Session S-27 WA: Induction Machines; Wednesday May 18; Session Chair: D. Hiramatsu- Toshiba Corp; Room - Salon A

77399 Effect of Laminated Core on Rotor Mode Shape of Large High Speed Induction 3.30-3.55 PM

Motor Sumit Singhal; Kumar Singh; Andrew Hyder

78319 An Analysis on Electric and Magnetic Behavior on an Induction Planar Actuator 3.55-4.20 PM

Nolvi F Baggio Filho; Aly F Flores Filho

79739 A Novel Evolutionary Based In-situ Efficiency Estimation Technique for Induction 4.20 - 4.45 AM

Machines Working with Unbalanced Supplies Arbi Gharakhani Siraki; Pragasen Pillay

82379 A Customizable Voltage Behind Reactance Squirrel Cage Induction Machine Model 4.45 - 5.10 PM

for PSCAD/EMTDC Nathan Wiedeback; Brian Johnson; Joseph Law; Herbert Hess

81095 Analysis Using D-Q Transformation of a Drive System Including Load and Two 5.10 - 5.35 PM

Identical Induction Motors Derya Ahmet Kocabas; Emrah Salman; Ahmet Kubilay Atalay

81223 Transient Performance of Isolated Induction Generator Under Different Loading 5.35 - 6.00 PM

Conditions Ahmed Alsalloum; Rizk Hamouda; Abdulrahman Alolah

Oral Session S-28 WA: Control; Wednesday May 18; Session Chair: Casey Butt, GM, USA ; Room - Oakes NW

75591 Determination of Differential Inductances of Permanent Magnet Synchronous 3.30-3.55 PM

Machines for Sensorless Control Heiko Peter; Ingo Hahn

76775 Loss-minimizing Flux Level Control of Induction Motor Drives 3.55-4.20 PM

Zengcai Qu; Mikaela Ranta; Marko Hinkkanen; Jorma Luomi

76889 Control ofa BLPM Machine without a Rotor Position Sensor Via Measured Shaft Torque 4.20 - 4.45 AM

Fayez Alrifai; Nigel Schofield

77505 Improved Sensorless Operation of Permanent Magnet Brushless AC 4.45 - 5.10 PM

Motors Based on Online Optimal Efficiency Control Zi Qiang Zhu; Li Ming Gong

79167 Speed and Current Model Predictive Control of an IPM Synchronous Motor Drive 5.10 - 5.35 PM

Silverio Bolognani; Ralph Kennel; Sascha Kuehl; Giorgio Paccagnella

81163 Performance Analysis of Three-Phase PWM Rectifier Using Direct Power Control 5.35 - 6.00 PM

Azziddin M. Razali; Aziz Rahman

Oral Session S-29 WA: Electric Vehicles; Wednesday May 18 Session Chair: Paul Thorburn, IOT. NRC; Room- Oakes South

3.30-3.55 PM

88291 Design and Analytical Representation of a Linear Induction Motor for Urban Transportation 3.55-4.20 PM

Seyed Ehsan Abdollahi; Mehran Mirzaei; Mojtaba Mirsalim

82283 Operating Strategies for Switched Reluctance Generators in Exhaust Gas Energy Recovery 4.20 - 4.45 AM

Systems Melanie Michon; Stuart D. Calverley; Kais Atallah

74113 Design and Analysis of Axial Flux Permanent Magnet BLDC Motor for Automotive 4.45 - 5.10 PM

Applications. Sreeju Sreedharan Nair; Shamsuddeen Nalakath; Samraj Dhinagar

81717 Electro-thermal Simulations of a Power Electronic Inverter for a Hybrid Car 5.10 - 5.35 PM

Jonas Ottosson; Mats Alakula; Dan Hagstedt

82099 Machine Design and Configuration of a 7000 HP Hybrid Electric Drive for 5.35 - 6.00 PM

Naval Ship Propulsion Stephen Kuznetsov

Oral Session S-30 WA: Grid Applications; Wednesday May 18; Session Chair: Hew Ping; UPEDAC,MY ; Room -Hennepin North

80997 Issues Regarding Cost Estimation of Permanent Magnet Synchronous Generators for 3.30-3.55 PM

Mega-Watt Level Wind Turbines Salem Alshibani; Vassilios Agelidis

75297 A MATLAB/SIMULINK Model to Study the Performance of the VFT for the 3.55-4.20 PM

Interconnection of Weak and Strong AC Grids

Ahmed Hossam El Din; Mohamed Ashraf Abdullah; Mona Ibrahim

82637 Comparative Analysis of Closed-Loop Current Control of Grid Connected 4.20 - 4.45 AM

Converter with LCL Filter Md Shirajum Munir; Jinwei He; Yun Wei Li

82711 Modeling and Control of a Grid-Connected BDFM Under Unbalanced Grid Voltage 4.45 - 5.10 PM

Conditions Pedram Sotoodeh; Mahdi Izadkhast; Hamed Khosravi; Hashem Oraee

84921 Several Practical Configurations of a Grid-Tied Induction Generator Constructed 5.10 - 5.35 PM

From Inexpensive Single Phase Induction Motors Rui Zhang; Faisal Khan ; Mare Bodson

71126 New System for Power Transfer Between Two Asynchronous Grids Using Twin 5.35 - 6.00 PM

Twin Stator Induction Machine Mohamed Abdulla

Closing Ceremony, Wednesday May 18; Room - Oakes Grand Ballroom 6.00 PM - 6.30 PM

Poster Session PS-01 Monday Afternoon, May 16; Chairs: Tom Habetler-G.Tech & H.Toliyat - TAMU; Room - Hennepin South

82475 Speed Control for BLDCM Driver Using Repetitive Control Cassio Baratieri; 2.00-3.00 PM

Humberto Pinheiro

80529 A Simplified State Switching Control Strategy for Survivable Variable-Speed Induction 2.00-3.00 PM

Generators Xiaodong Shi; Mahesh Krishnamurthy

82575 Comparison of Torque Ripple Minimization Control Techniques in Surface- 2.00-3.00 PM

mounted Permanent Magnet Synchronous Machines Peng Zhang; Gennadi Sizov; Nabeel

Demerdash

77525 Optimization of the Feedforward Neural Network for Rotor Cage Fault Diagnosis in 2.00-3.00 PM

Three-Phase Induction Motors Hasni Mourad

82181 Fault Detection, Isolation and Reconfiguration of Three-Phase AC Drive with 2.00-3.00 PM

Current Sensor Fault Fabien Meinguet; Johan Gyselinck

75793 Cogging Torque Prediction for Mass-Produced Axial Flux PMSM Stators 2.00-3.00 PM

Travis Brown; Greg Heins; Simon Hobbs; Mark Thiele; James Davey

1569375961 General PMSM d,q-Model Using Optimized Interpolated Absolute and 2.00-3.00 PM

Differential Inductance Surfaces Sven Kellner; Bernhard Piepenbreier

78599 Design and Analysis of PMSMs for HEVs Based Upon Average Driving Cycle 2.00-3.00 PM

Efficiency Abdul Rehman Tariq; Carlos Nino-Baron; Elias Strangas

81805 Effect of Design Parameters on Electromagnetic Torque of PM Machines with Concentrated 2.00-3.00 PM

Windings Using Nonlinear Dynamic FEM Hung VuXuan; Domenico Lahaye; Samuel Ani;

Henk Polinder; Braham Ferreira

75343 A Direct Drive Permanent Magnet Generator Design for a Tidal Current Turbine 2.00-3.00 PM

(SeaGen) Ozan Keysan; Alasdair McDonald; Markus Mueller

72387 Decentralized Nonlinear Control Strategies for Disturbance Rejection in Winding 2.00-3.00 PM

Systems Mokhtari Fouad; Pierre Sicard; Hazzab Abdeldjbar

82393 Sensorless Predictive DTC for the PM Synchronous Machine Roberto Morales- 2.00-3.00 PM

Caporal; Rafael Ordoñez-Flores; Edmundo Bonilla-Huerta; Mario Pacas

82719 Electromagnetic Modelling of Existing Large Hydro Generator Ana B.M. Aguiar; 2.00-3.00 PM

Arezki Merkhouf; Kamal Al-Haddad; Claude Hudon

81603 A Comparison Between the TORUS and AFIR Axial-Flux Permanent-Magnet Machine Using 2.00-3.00 PM

Finite Element Analysis Amin Mahmoudi; Hew Wooi Ping; Nasrudin Abdul Rahim

82341 Evaluation of a Semi Claw-Pole Machine with SM2C Core Avo Reinap; Dan 2.00-3.00 PM

Hagstedt; Conny Högmark; Mats Alaküla

80509 Electromagnetic Assessment of Force Distribution for Common Control Strategies 2.00-3.00 PM

in Permanent Magnet Synchronous Motors Yong Jiang; Mahesh Krishnamurthy

81061 Resonant DC-Link Soft-Switched DC-AC Converters Alireza Safaee; Davood 2.00-3.00 PM

Yazdani; Alireza Bakhshai; Praveen Jain

81771 Control of a Flywheel Energy Storage System for Rural Applications Using a 2.00-3.00 PM

Split-Pi DC-DC Converter Allan Maclaurin; Richard Okou; Paul Barendse; Mohamed Azeem

Khan; Pragasen Pillay

83241 Reliability Comparison for 3L-NPC and 3L-ANPC Converters for Drives Application 2.00-3.00 PM

Jun Li; Steven Englebretson; Huang Alex. Q.

84527 DSP-Based Simplified Space-Vector PWM for a Three-Level VSI José Darío 2.00-3.00 PM

Betanzos-Ramírez; Jaime Jose Rodríguez-Rivas; Edgar Peralta-Sanchez

81487 Design and Analysis of an Integrated Differential-common Mode Filter for on Site 2.00-3.00 PM

Motor Bearing Problems Ahmed Sayed-Ahmed; Gary Skibinski

81963 Topology Comparison for a Magnetically Suspended Ceiling Actuator 2.00-3.00 PM

Timo Overboom; Johan Smeets; J W Jansen; Elena Lomonova

81887 Composite Materials for Low Loss Rotor Construction Johan Wolmarans; 2.00-3.00 PM

Martin van der Geest; Henk Polinder; Braham Ferreira; Dennis Zeilstra

82741 Significance of Incorporating Proximity Effect in Aluminum- and Copper-rotor 2.00-3.00 PM

SEIGs for Wind Power Application Lakshmi Varaha Iyer; Vamsi Ramakrishnan; Narayan Kar

77977 Generator Selection for Rural Electrification From Renewable Energy 2.00-3.00 PM

Olivare Dzune; Pragasen Pillay; Luiz A. C. Lopes

75079 Design and Operation of a Magnetic Continuously Variable Transmission 2.00-3.00 PM

Kais Atallah; Jiabin Wang; Stuart D. Calverley; Sarah Duggan

75187 Ageing Due to Thermal Cycling by Start and Stop Cycles in Lifetime Estimation of 2.00-3.00 PM

Hydroelectric Generator Stator Windings Voitto Iikka Juhani Kokko

75249 Control of Active Front-End Rectifier Under Unbalanced Voltage Supply and 2.00-3.00 PM

DC-Link Pulsations Miroslav Chomat; Ludek Schreier; Jiri Bendl

75791 Kalman Filter to Measure Position and Speed of a Linear Actuator Joel Maridor 2.00-3.00 PM

75949 Analysis and Design Considerations of a 2-DoF Rotary-Linear Actuator 2.00-3.00 PM

Koen Meessen; Johannes Paulides; Elena Lomonova

81797 Machine Interactions in Field Oriented Controlled Multi-Machine Three Phase 2.00-3.00 PM

Induction Motor Drives Bhakti Joshi; Dhaval Patel; Mukul Chandorkar

76637 Multi-phase Cage Rotor Induction Machine Drive with Direct Implementation of Brush 2.00-3.00 PM

DC Operation Nkosinathi Gule; Maarten Kamper

86611 Design and Control of Multiphase Induction Motor Archana Nanoty 2.00-3.00 PM

82461 A Novel Converter Configuration for Wind Applications Using PWM CSI with Diode 2.00-3.00 PM

Rectifier and Buck Converter Xiaotian Tan; Jingya Dai; Bin Wu

74925 Rotor Broken Bar Diagnostics in Induction Motor Drive Using Wavelet Packet 2.00-3.00 PM

Transform and ANFIS Classification Haitham Abu-Rub; Atif Iqbal; SK Moin Ahmed; Jaroslaw

Guzinski; Marek Adamowicz; Mina Rahimian

75357 Analytical Modeling of a Vertically Distributed Winding Configuration for Fault 2.00-3.00 PM

Tolerant Permanent Magnet Machines to Suppress Inter-Turn Short Circuit Current Limiting

Puvaneswaran Arumugam; Tahar Hamiti; Chris Gerada

77045 Efficiency Estimation of an Air-Cored Permanent Magnet Synchronous Generator 2.00-3.00 PM

Using Finite Elements and Equivalent Circuit Modelling Estanislao Echenique Subiabre;

Markus Mueller

75237 Optimal Placement of Power Quality Monitors in Distribution Systems Using the 2.00-3.00 PM

Topological Monitor Reach Area Ahmad Asrul Ibrahim; Azah Mohamed; Hussain Shareef

Poster Session PS-02 Tuesday Afternoon, May 17;Chairs: Ray Findlay-McMaster & Hew Ping-UM-MY; Room-Hennepin-South

76887 Direct Decoupled Active and Reactive Power Control of Doubly Fed Induction 2.00-3.00 PM

Machine Without Rotor Position Sensors and with Robustness to Saturation and Parameter

Variation Navid Amiri; S. Mohammad Madani; Hossein Abootorabi Zarchi

75623 Power Factor Compensation for CSC-fed PMSM Drive Using D-axis Stator Current 2.00-3.00 PM

Control Ehsan Al-nabi; Bin Wu; Navid Reza Zargari; Vijay K Sood

75741 A New Torque Hysteresis Control Algorithm for Direct Torque Control of an IM 2.00-3.00 PM

Drive Muhammad Hafeez; Mohammad Nasir Uddin

75901 Model Predictive Direct Torque Control for Grid Synchronization of Doubly Fed 2.00-3.00 PM

Induction Generator Yongchang Zhang; Jianguo Zhu; Jiefeng Hu

76301 Simple and Robust Predictive Direct Control of DFIG with Low Constant Switching 2.00-3.00 PM

Frequency and Reduced Torque and Flux Ripples Jiefeng Hu; Jianguo Zhu; Yongchang Zhang;

Qishuang Ma; Youguang Guo

76641 Control for High Instantaneous Torque From Induction Machines: Methods and 2.00-3.00 PM

Limits Veysel Buyukdegirmenci; Krein Philip T.

72945 Influence of a Converter Control Malfunction on the Harmonic Behavior of Wind 2.00-3.00 PM

Turbines with Permanent Magnet Generator Rui Melicio; Victor Mendes; Joao Catalao

82767 A Wavelet Based Multi-Resolution Controller for Sensorless Position Control of PM 2.00-3.00 PM

Synchronous Motors At Low Speed Arash Nejadpak; Ahmed Mohamed; Osama Mohammed

76095 The Single-Phase Brushless Doubly-Fed Machine as a Generator for Wind Turbines 2.00-3.00 PM

Thomas Logan; Teng Long; Richard McMahon

76663 Minimum Reactive Power Tracking with MPPT of Converter Excited Induction 2.00-3.00 PM

Generator for Wind Power Generation Noriyuki Kimura; Kenichi Nakatani; Morizane

Toshimitsu; Nishida Yasuyuki

76683 DC Link Current Control of Cascaded Current Source Converter Based Offshore 2.00-3.00 PM

Wind Farms Mitesh Popat; Bin Wu; Navid Reza Zargari

76695 Improved Low Voltage Ride Thorough Capability of Wind Farm Using STATCOM 2.00-3.00 PM

Miad Mohaghegh Montazeri; David Xu; Bo Yuwen

82665 Synchronous Generator Based Wind Energy Conversion System (WECS) Using 2.00-3.00 PM

Multi-modular Converters with Autonomous Controllers Maira Zulqarnain; David Xu;

Bo Yuwen

82765 Low Cost Current Source Converter Solutions for Variable Speed Wind Energy 2.00-3.00 PM

Conversion Systems Jingya Dai; Jiacheng Wang; Bin Wu; David Xu; Navid Reza Zargari

76521 Laminated Circumferential Transverse Flux Machines - Lamination Concept and 2.00-3.00 PM

Applicability to Electrical Vehicles Manuel Gärtner; Peter Seibold; Nejila Parspour

75869 Multi-Source Traction Drive for Axial Flux Permanent Magnet In-Wheel 2.00-3.00 PM

Synchronous Motor Ciro Attaianese; Mauro Di Monaco; Giuseppe Tomasso

82227 Transient and Islanding Performance of Grid-Connected Induction Generator 2.00-3.00 PM

Feeding Induction Motor and Resistive Loads Saad Alghuwainem

75549 Minimising Capacitor Lifetime Failures in Power Converters for Wave Energy 2.00-3.00 PM

Applications Jonathan Shek; Ewen Macpherson; Markus Mueller

75917 Stability Analysis of a DC/DC Boost Converter Fed Permanent Magnet Brushless 2.00-3.00 PM

Motor Drive Abdul Karim Al Shanfari; Jiabin Wang

82219 Design-oriented Analysis on Parameters of Bidirectional Converter Based on the 2.00-3.00 PM

Unbalance Factor Weiying Wang; Wei Zhang

83661 Design of Symmetric Voltage Cancellation Control for LCL Converters in Inductive 2.00-3.00 PM

Power Transfer Systems Hunter Wu

84987 Implementation of a DC-DC Converter with Variable Structure Control of Switched 2.00-3.00 PM

Systems Rodrigo Cardim; Marcelo Teixeira; Edvaldo Assunção; Marcio Covacic; Falcondes

Seixas; Flavio Faria; Edson Mainardi

76217 A Sensorless Speed Estimation Method for Wound Rotor Induction Machine 2.00-3.00 PM

Sinisa Djurovid; Slobodan Djukanovid

87263 A 6/4 Pole PM-Assisted Synchronous Reluctance Motor Drive 2.00-3.00 PM

Tzu-Shien Chuang

75415 Electric Machines as Metamaterials: Induction Machine Design Using Planar Layer 2.00-3.00 PM

Models Matthew P. Magill; Krein Philip T.

76155 Investigation of Thermal Stress in the Rotor of Doubly-Fed Induction Generators 2.00-3.00 PM

At Synchronous Operating Point Jakob Jung; Wilfried Hofmann

76457 A Novel Equivalent Circuit Involving Stray Load Loss and Harmonic Torques for 2.00-3.00 PM

High Speed Induction Motors Driven by Inverters Katsumi Yamazaki

76655 Experimental Study of the Effect of Positive Sequence Voltage on the Derating of 2.00-3.00 PM

Induction Motors Under Voltage Unbalance Enrique C. Quispe; Xosé López-Fernández;

Andre Mendes; Antonio J. Marques Cardoso; Jairo Palacios

78551 Performance Evaluation of Induction Motor Efficiency and In-service Losses 2.00-3.00 PM

Measurement Using Standard Test Methods He Zhang; Pericle Zanchetta; Chris Gerada;

Keith Bradley; Junyi Liu

86467 Detection and Classification of Electrical Supply Voltage Quality to Electrical 2.00-3.00 PM

Motors Using the Fuzzy-Min-Max Neural Network Harapajan Singh; Mohd Zaki Abdullah;

Anas Qutieshat

85003 A Simple and Low Cost Three-Phase Sector Induction Machine Adilson Tavares; 2.00-3.00 PM

Aly F Flores Filho; Yeddo Blauth

75773 Decoupling Manufacturing Sources of Cogging Torque in Fractional Pitch PMSM 2.00-3.00 PM

Mark Thiele; Greg Heins; Travis Brown

75491 Finite-Element Analysis and Design of a Radial-Field Brushless PM Machine 2.00-3.00 PM

Utilizing Soft Magnetic Composites Gene Liew; Chun Tang; Wen Soong; Nesimi Ertugrul;

David Gehlert

75887 Improving the Torque Output in Radial- and Axial-Flux Permanent-Magnet 2.00-3.00 PM

Synchronous Machines with Concentrated Windings by Using a Combined Wye-Delta

Connection Hendrik Vansompel

74873 Adaptive Feedforward Control to Compensate Cogging Torque and Current 2.00-3.00 PM

Measurement Errors for PMSMs Kheng Yeo; Greg Heins; Friso DeBoer; Benjamin Saunders

81375 Improved Model for Design of Permanent Magnet Machines with Concentrated Windings 2.00-3.00 PM

Hung VuXuan; Domenico Lahaye; Henk Polinder; Braham Ferreira

75519 Integrating the S-PQDA Software Tool in the Utility Power Quality Management 2.00-3.00 PM

System Mohamed Faisal; Azah Mohamed

87241 Effect of Iron Losses on the Model and Control of a Hybrid Excitation Synchronous 2.00-3.00 PM

Generator Rita Mbayed; Lionel Vido; Georges Salloum; Eric Monmasson; Mohamed Gabsi

Poster Session PS-03 Wednesday Afternoon, May 18; Chairs: Akira Chiba- Japan & P. Jain-Queensu; Room-Hennepin South

76069 Estimation of Saturation of Permanent-Magnet Synchronous Motors Through an 2.00-3.00 PM

Energy-Based Model Al Kassem Jebai; François Malrait; Philippe P. Martin; Pierre Rouchon

76153 Analytical Cogging Torque Prediction for Surface-Mounted PM Machines 2.00-3.00 PM

Accounting for Different Slot Sizes and Uneven Positions Lijian Wu; Zi Qiang Zhu;

David Staton; Mircea Popescu

76157 Effects of Load Conditions on Rotor Eddy Current Loss in Modular Permanent 2.00-3.00 PM

Magnet Machines Jason Ede; Kais Atallah; Geraint Wyn Jewell

77443 Comparison of Drive Performance of PM Synchronous Machine Fed by Inverters 2.00-3.00 PM

with Different PWM Strategies in Constant Torque and Constant Power Regions Hesong Liu;

Zi Qiang Zhu; Essam Mohamed; Yongling Fu; Xiaoye Qi

80487 Torque Components in Integral- and Fractional-Slot IPM Machines 2.00-3.00 PM

Massimo Barcaro; Nicola Bianchi

81995 Evaluation of Synchronization Capability in Line-Start Permanent Magnet 2.00-3.00 PM

Synchronous Motors Arash Hassanpour Isfahani; Sadegh Vaez-Zadeh; Aziz Rahman

76779 Assessment of Core Losses in a Flux-Modulating Synchronous Machine Tadashi Fukami; 2.00-3.00 PM

Hirofumi Aoki; Kazuo Shima; Masatoshi Momiyama; Mitsuhiro Kawamura

85001 Multi-phase Permanent Magnet Motor Drives for Fault-Tolerant Applications 2.00-3.00 PM

Marco Villani; Marco Tursini; Giuseppe Fabri; Luca Castellini

85011 Ironless Permanent Magnet Synchronous Machine Stiffness Calculations for 2.00-3.00 PM

Flywheel Energy Storage Systems Ian Higginson; Herbert Hess; Joseph Law

87479 Extension of a D-Q Model of a Permanent Magnet Excited Synchronous Machine 2.00-3.00 PM

by Including Saturation, Cross-Coupling and Slotting Effects Thomas Herold; David Franck;

Enno Lange; Kay Hameyer

75889 Calculation of Iron Loss in Electrical Generators Using Finite Element Analysis 2.00-3.00 PM

Philip Hargreaves; Barrie Mecrow; Ross Hall

76073 Electrical Machines with Higher Efficiency Through Combined Star-Delta Windings 2.00-3.00 PM

Henning Kasten; Wilfried Hofmann

81999 Impact of Over/Under and Voltage Unbalanced Supplies on Energy-Efficient 2.00-3.00 PM

Motors Ashwill Van Wyk, Mohamed Azeem Khan, Paul Barendse

82559 Impact of Modifying the Stator Tooth Tip on Electromagnetic Torque Production 2.00-3.00 PM

for an 8/6 Switched Reluctance Machine Saritha Balathandayuthapani; Fletcher Fleming;

Chris Edrington; Eyhab El-Kharashi

87219 Comparative Study Between a Single-phase and a Three-phase Switched 2.00-3.00 PM

Reluctance Machine Darizon Andrade; Luciano Gomes

75195 Control Techniques for Power Quality Improvement in Delta Connected Load 2.00-3.00 PM

Using DSTATCOM Tejas Zaveri; Bhalja Bhavesh; Naimish Zaveri

76117 Influence of Design Parameters on Magnetic Gear's Torque Capability 2.00-3.00 PM

David Evans; Zi Qiang Zhu

76181 Comparative Study of Switching Signal Generation Techniques for Three Phase 2.00-3.00 PM

Four Wire Shunt Active Power Filter Heli Golwala; Chudamani R

76269 Improvement of Rotational Torque and Suspension Force by Winding 2.00-3.00 PM

Arrangement in a Bearingless Motor Drive for a Solid-Liquid Separator Yasuhiro Koshi;

Masahide Ooshima; Mohammad Nasir Uddin; Hiroshi Kitada

76531 Test Specimen Shape Considerations for the Measurement of Rotational Core 2.00-3.00 PM

Losses Natheer Alatawneh; Pragasen Pillay

76621 The Effects of Magnetic Circuit Geometry on Characteristics of Switched 2.00-3.00 PM

Reluctance Motors Šemsudin Mašid; Senad Smaka; Iris Salihbegovid; Mirsad Ćosovid

76941 Measurement of Stator Core Magnetic Characteristics Alexander Clerc; 2.00-3.00 PM

Annette Muetze

80473 Multi Layer Planar Concentrated Windings Tom Cox; John Eastham 2.00-3.00 PM

81973 Development of a Linear Position Independent Inductive Energy Transfer System 2.00-3.00 PM

Thomas Gerrits; Davy Krop; Elena Lomonova

82311 Design of an Actuator for the Fast and High Accuracy Wire Scanner Mohamed 2.00-3.00 PM

Koujili; Youcef Ait-Amirat; Bernd Dehning; Abdesslem Djerdir; Jonathan Emery; Juan Alvarez

82619 A Software Design Technique for Differential Protection of Power Transformer 2.00-3.00 PM

Adel Aktaibi; Aziz Rahman

87299 Auralization of Electrical Machines in Variable Operating Conditions 2.00-3.00 PM

Michael van der Giet; Julian Blum; Pascal Dietrich; Sönke Pelzer; Markus Müller-Trapet; Martin

Pollow; Michael Vorländer; Kay Hameyer

1569410519 Simultaneous State and Input Estimation of a Synchronous Machine Using the 2.00-3.00 PM

Extended Kalman Filter with Unknown Inputs Esmaeil Ghahremani; Innocent Kamwa

75435 Analysis of CPSR in Motoring and Generating Modes of an IPM Motor Rukmi Dutta; 2.00-3.00 PM

Lester Chong; M. Fazlur Rahman

82849 Methods for Determining the Parameters and Characteristics of PMSM 2.00-3.00 PM

Maryam Kazerooni; Narayan Kar

76613 Passivity-Based Adaptive Sliding Mode Speed Control of Switched Reluctance 2.00-3.00 PM

Motor Drive Considering Torque Ripple Reduction Mohammad Masoud Namazi Isfahani;

Mortaza Saghaian-Nejad, Amir Rashidi, Hossein Abootorabi Zarchi

73825 An Analytical Solution for the Torque and Power of a Solid-Rotor Induction Motor 2.00-3.00 PM

Miroslav Markovic; Yves Perriard

80623 Error Analysis of Efficiency Estimation Methods for Induction Motors 2.00-3.00 PM

Barbara Herndler; Paul Barendse; Mohamed Azeem Khan

76407 Analytical Modeling of Variable Impedance Induction Machines Hooshang Gholizad; 2.00-3.00 PM

Andreas Binder

76445 A Simple Core Structure for Small Axial-Flux PMSGs John G Wanjiku; Hartmut 2.00-3.00 PM

Jagau; Mohamed Azeem Khan; Paul Barendse

76429 Considerations for Improving the Non-Intrusive Efficiency Estimation of Induction Machines 2.00-3.00 PM

Using the Air Gap Torque Method Barbara Herndler; Paul Barendse; Mohamed Azeem Khan

80865 An Application of Vehicular Ad Hoc Wireless Network for Hybrid Electric Vehicle 2.00-3.00 PM

Aslinda Hassan; Mohamed Hossam Ahmed; Aziz Rahman

Note: The first 5 numbers of each paper (15693) are common. These are ormitted. The last 5 numbers are listed.

MM -means Monday morning,, etc. M- Monday , T-Tuesday, W -Wednesday, A-afternoon M- morning

Opening Session: 8.00 - 8.30 AM, Monday May 16; Ray Findlay-2002 IEEE President; Room- Oakes Grand Ballroom

Invited Keynote Lectures:

Session Chair: M.A. Rahman, Memorial Univesity; Monday May 16, 8,30 - 10. 00 AM ; Room- Oakes Grand Ballroom

Mon -May 16 Invited Lecture by C.C. Chan "Global Outlook of Electric Vehicles and Advances on their Technology"-8.30-9.15

Mon-May 16 Invited Lecture by R. Lorenz, "AC Motor Drives -New Technologies Changing the Paradigm", 9.15-10 AM

Session Chair: M.A. Masrur-US Army; Tuesday May 17, 8.30 - 10. 00 AM ; Room- Oakes Grand Ballroom

Tuesday, May 17,, Invited Lecture by Praveen Jain, "Advances on Resonant and Soft Switching Technology in Electric Vehicles", 8.30-9.15 AM

Thuesday, May 17, Invited Lecture by Akira Chiba, "Rare-Earth-Free AC Motors - An Alternative Approach Advavances", 9.15-10.00 AM

Session Chair: Bin Wu, Ryerson University,Wednesday May 18, 8,30 - 10. 00 AM ; Room- Oakes Grand Ball

Wednesday ,May 18, Invited Lecture by Z.Q. Zhu, " Recent Advances on Permanent Magnet Machines Technology", 8.30 AM - 9.15 AM

Wednesay ,May 18, Invited Lecture by S.A.Saleh & M.A. Rahman , Wavelet Modulation Technique- Advancing Power

Electronic Inverters,9.15-10 AM