Embed Size (px)
Citation preview
2
31
4
All installation work must be performed by a qualified professional installer only.The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Compatible with these Kenwood double DIN devices
Kenwood Navigation
Installation ManualDouble DIN KitStandard: CAW 2300-03Rubber-Touch: CAW 2300-03-RT
• Toyota RAV 4 2006
Double DIN Set contents
• (1) Metal Frame• (2) Installation Kit
• (3) Mounting frame• (4) Facia Plate
1. Enlevez le panneau de la console centrale (Droite) et (Gauche) .
: Clip (2x3)
5
5
1. Verkleidung der Mittelkonsole (R) und (L) entfernen.
: Clip (2x3)
1. Remove the center cluster panel (R) and (L) .
: Clip (2x3)
5
5
5
5
RAV4 (LHD) - 611-05
RAV4 AUDIO
AUSBAU AUS DEM FAHRZEUGVEHICLE DISASSEMBLYDEMONTAGE DU VEHICULE
An den schraffierten Bereichen Schutz-klebeband anbringen. Darauf achten,die Teile vorsichtig zu entfernen, um dieVerkleidung nicht zu beschädigen.
ACHTUNG
Recouvrez les zones ombrées avec de la bande adhésive deprotection. Retirez délicatement les pièces afin de ne pasendommager les panneaux.
ATTENTION
Put protective tape on the shaded areas.Be sure to remove the parts carefully soyou do not damage the panels.
CAUTION
2. Audiobaugruppe ausbauen.
: Schrauben (4x)
2. Remove the audio unit .
: Screw (4x)
2. Enlevez l’ensemble audio .
: Vis (4x)100
9
100
9
100
9
Abb. 1 - Fig. 1
Abb. 2 - Fig. 2
5
9
100
a1. Enlevez le panneau de la console centrale (Droite) et
(Gauche) .
: Clip (2x3)
5
5
1. Verkleidung der Mittelkonsole (R) und (L) entfernen.
: Clip (2x3)
1. Remove the center cluster panel (R) and (L) .
: Clip (2x3)
5
5
5
5
RAV4 (LHD) - 611-05
RAV4 AUDIO
AUSBAU AUS DEM FAHRZEUGVEHICLE DISASSEMBLYDEMONTAGE DU VEHICULE
An den schraffierten Bereichen Schutz-klebeband anbringen. Darauf achten,die Teile vorsichtig zu entfernen, um dieVerkleidung nicht zu beschädigen.
ACHTUNG
Recouvrez les zones ombrées avec de la bande adhésive deprotection. Retirez délicatement les pièces afin de ne pasendommager les panneaux.
ATTENTION
Put protective tape on the shaded areas.Be sure to remove the parts carefully soyou do not damage the panels.
CAUTION
2. Audiobaugruppe ausbauen.
: Schrauben (4x)
2. Remove the audio unit .
: Screw (4x)
2. Enlevez l’ensemble audio .
: Vis (4x)100
9
100
9
100
9
Abb. 1 - Fig. 1
Abb. 2 - Fig. 2
5
9
100a
b
Installation Manual Double DIN Kit CAW 2300-03 / CAW 2300-03-RT
2. Remove the 4 screws (a) and remo-ve the OEM head unit (b)
All installation work must be performed by a qualified professional installer only.The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Remove the trim frames (a) at the left and right side carefully.
5. Place the facia plate on the dashboard and fix it with the 4 original screws.
Push the metal frame into the facia plate
Connect all required circuit points and push the double DIN head unit in the metal frame until it snaps in.
Place the trim frame. Reinstall everything in reverse
order to finish installation.
Mount the metal brackets with the double DIN head unit
The position of the coppercoloured holder can be adjusted to your needs for perfect fit.(see sample)
