1

Tutorial hipster panties

This applies to panties B

Cut all parts. 1 front piece, 1 rear and 2 branch pieces. Keep in mind that seam allowance

is included.

We start with the back and both branch pieces.

1. Lay the branch bit 3b with the right side upward.

2. Then place the back piece on the branch piece, with the right side upward.

3. Last, we add the other branch pieces with the right side downwards.

4. Assemble the seam with overlock or stretch stitch.

2

This is what it looks like when they are sewn together.

Now fold the back piece 2 times. The edge of the branches should lie downwards.

1. Take the front piece and add it with the downside down at the branch, which will

be the inside of the panties.

2. Fold over the other branch piece. Now the front lies between the two branches.

The front and rear are between the branch pieces.

3. Sew the seam.

3

Turn around the trousers so that forward and backing ends on the outside of branch

bits.

1. Load the front right side to the right side with the backrest.

2. Sew the side seams together.

Bind, sew on lace or sew fold over elastic in the leg openings.

4

To sew the panty elastic I start by glueing a little snout. Then I drive with the overlock,

straight to the right. Then I top stitch with a twin needle. (Turns the seam inwards and

sews on right side).

You can also choose to sew a thin elongate and fold down the edge and then the top

stitch.

Done!

5

This applies to panties A

Cut out all parts. 1 front piece, 1 rear and 1 branch pieces. Keep in mind that seam

allowance is included.

1. Lay the branch bit 3a with the right side upward.

2. Then place the back piece on the branch piece, with the right side upward.

3. Last, we add the other branch pieces with the right side downwards.

4. Assemble the seam with overlock or with stretch stitch.

6

This is what it looks like when they are sewn together.

Fold over the branch, make sure the branch is plain. Glue or pin the branch.

Sew the curved part of the branch with coverstitch or a decorative stitch.

7

1. Load the front right side to the right side with the backrest.

2. Sew the side seams together.

1. Bind, sew on lace or sew fold over elastic in the leg openings.

2. To sew the panty elastic I start by glueing a little snout. Then I sew with the

overlock, right to right. Then I top stitch with a twin needle. (Turns the seam

inwards and sew on right side).

You can also choose to sew a thin elongate and fold down the edge and then the top

stitch.

Done!

Ida Georgiou

2017-10-02