Vacuum Box Systems

Vacuum Box Leak Detection Systems

Vacuum Box

Vacuum Box

To compliment our tank inspection equipment, Silverwing manufacture an extensive range of vacuum box systems

Vacuum Boxes are available for both floor-plate lap welds and shell to

annular welds

Vacuum Box

The open edge of the vacuum box incorporates a soft but hard wearing

neoprene seal so a vacuum can be generated within the box

Vacuum Box

All vacuum boxes are fitted with a calibrated vacuum relief valve to prevent damage or injury due to

excessive vacuum.

Vacuum Box

Standard High Pressure models produce a vacuum of 20 inch Hg for detection of smaller leaks

Vacuum Box

Two main types of Vacuum Box systems are available:

low pressure models produce a vacuum of 10 inch Hg and are best suited for new tank builds where large leaks are the main concern.

Vacuum Box

Two main types of Vacuum Box systems are available:

Vacuum boxes can be configured to run from

an electric vacuum pump or

from a compressed air supply

Vacuum Box

The V600E electric vacuum pump eliminates the need for a

compressor

Vacuum Box

The simple Vacuum Box test is highly effective and provides a rapid and economic way of evaluating the

Integrity of all types of weld

Vacuum Box

www.silverwinguk.com

NOT OPERATOR DEPENDENTTECHNOLOGY DRIVEN

Silverwing