This note is applicable with all versions of the UI 1 2 3 4 Ensure PICKIT2 OS is 2.32.00 (This is the code in the actual programmer hardware). Set programming mode as shown. Load the hex file (Auto detect, i.e. not "Manual Detect" from step 3 requires a device be connected before loading the hex file). PASS Or FAIL When the "Write" button is pressed, the PICKIT 2 will automatically (1) Write the device, (2) Verify the device, (3) Write the code protect bit and then (4) Verify the code protect bit. No other button but "Write" ever needs to be pressed to program an unlimited number of PICs per session. The screens shown above are the programming progress after simply hitting "Write"! Never hit any other button except "Write" from this point on! 5 Select "Verify on Write" to automatically verify programming. "Manual Device Select" may also be chosen to allow code to be loaded when not device is connected.

Visio-PicKit2 · 2011. 8. 21. · PICkit 2 found and connected Pro-wan EEPROM 3FFF 3EFF 3FFF —ex Only 3FîF 3FFF 3FFF Dowrioad PICkit 2 Operetng System 3 FEE PICkif 2 'PICkit Programmer

Download PDF Report

Upload
others
View
8
Download
0

Embed Size (px)

Citation preview

Page 1: Visio-PicKit2 · 2011. 8. 21. · PICkit 2 found and connected Pro-wan EEPROM 3FFF 3EFF 3FFF —ex Only 3FîF 3FFF 3FFF Dowrioad PICkit 2 Operetng System 3 FEE PICkif 2 'PICkit Programmer

This note is applicablewith all versions of the UI

1 2 3

Ensure PICKIT2 OS is 2.32.00 (This is thecode in the actual programmer hardware). Set programming mode as shown.

Load the hex file (Auto detect, i.e. not "Manual Detect" from step 3requires a device be connected before loading the hex file).

PASS

Or FAIL

When the "Write" button is pressed, the PICKIT 2 will automatically (1) Write the device, (2) Verify the device, (3) Write the code protect bit and then (4) Verify the code protect bit. No other buttonbut "Write" ever needs to be pressed to program an unlimited number of PICs per session. The screens shown above are the programming progress after simply hitting "Write"!

Never hit any other button except"Write" from this point on!

Select "Verify on Write" to automatically verifyprogramming.

"Manual Device Select" may also be chosen to allow codeto be loaded when not device is connected.