2
Type FR/4C Specification Galvanised mild steel to BS2989 Supplied cut to length Plastic caps supplied and fitted (if required) Grout saddles supplied and fitted (if required) Bulk delivery No order to small Rapid delivery service CIVIL ENGINEERING CONSTRUCTION Call 01535 664231

Well Void Tube

Embed Size (px)

DESCRIPTION

Well void tubes are used in construction to minimize the amount of poured concrete necessary in structural support columns and other major building work.Made from rolled aluminium or other metals they can be produced to any length and in a range of diameters, they are manufactured in the UK. Visit: http://wells-spiral.co.uk/application/civil-engineering-construction/well-void-tube/

Citation preview

  • Type FR/4CSpecification Galvanised mild steel to BS2989 Supplied cut to length Plastic caps supplied and fitted (if required) Grout saddles supplied and fitted (if required) Bulk delivery No order to small Rapid delivery service

    CIVIL ENGINEERING CONSTRUCTION

    Call 01535 664231

  • NomDia

    (mm)ID

    0.5mmkg/M

    0.4mmkg/m

    Plastic end

    plugs

    414651565861

    41.045.550.054.559.061.5

    0.700.740.800.850.941.02

    N/A0.600.640.680.750.82

    0.200.300.400.500.600.60

    667176818688

    66.070.575.079.584.088.5

    1.051.121.191.291.301.39

    0.840.900.961.031.041.11

    0.650.700.750.800.850.90

    9196

    1011031101.30

    91.095.5

    100.0104.5109.0130.0

    1.441.481.571.641.671.85

    1.151.181.261.311.33N/A

    0.901.001.201.251.301.60

    Well-Void Type FR/4cCorrugated sheathingMaterial: Galvanised Mld Steel to BS2989 (1982) Mild steel to BS1449 (1) (1983)Diameters: Nominal + 2mm - 0mmThe continuous curve indicates recommended dimensions for normal applications.The diagram shows the test pipes rigidity. For special fields of application tensions must also be checked.

    Prospect Works Airedale Road Keighley West Yorkshire BD21 4LW Tel: 01535 664231 Fax: 01535 664235 www.wells-spiral.co.uk [email protected]

    NB:- FR/1c available from 100 dia and larger (0.5mm)

    November 2013

    Radial rigidity

    FR 0.5 0.022.5