Upload
ledan
View
219
Download
4
Embed Size (px)
Citation preview
2
Build it. Bond it. Fix it.
Henkel Corporation, a global leader in maintenance and repair chemi-cals, provides innovative solutions for even the most challenging prob-lems associated with wind turbine assemblies.
Our O & M program includes a robust portfolio of products specifically engineered for the assembly, installation, maintenance and repair of blades, nacelles, towers and bases. Products include:
• Structuralbondingadhesives• Componentsealers• Threadlockers• Surfaceandcorrosionprotectioncoatings• Nonslipsafetycoatings• Basegrouts• Cablesealants• Flangesealantsandretainingcompounds• Bladeandpartcleaners
Maintenance professionals – in every industry – rely on Henkel Loctite® adhesives, sealants, lubricants and repair products to increase equip-ment reliability, reduce downtime and minimize equipment failures. Why take a chance? Insist on the best. Insist on Henkel.
Contents
Blade Maintenance ..............................................4–7
Nacelle Maintenance ..........................................8–11
Tower Maintenance ..........................................12–15
Base Maintenance ........................................... 16–17
Product Properties Charts ............................... 18–19
2 3
TipDamagePage 5
Impact DamagePage 6
Nonskid CoatingsPage 10–11
Panel SealingPage 8–9
Edge WearPage 4
Tower&Platform SealingPage 12
Corrosion ProtectionPage 13
Cable SealingPage 16–17
FlangeGrouting/ Pad RepairPage 16–17
ThreadlockingPage 14–15
Ladder BondingPage 14–15
YawBearing SealingPage 8–9
www.henkelna.com/windpower
Build it. Bond it. Fix it.
4
Blade Maintenance
To Apply:
•Surfaceshouldbeclean, dry and abraded.
•MixtheLoctite® UK 1370™B10™ Putty and apply using a trowel to smooth the product over the damaged area.
•Sandafter30 minutes.
Composite RepairEdge Wear (leading edge erosion)
Pitting and wear on the leading edge of a rotor blade can decrease the efficiency of wind turbines.
PROduCT uK 1351™ B25™ uK 1405™ uK 1370™ B10™
Part Number 1667557 * *
Package Size 400 ml cartridge * *
Mix Ratio (weight) 2:1 1:1 4:1
Work Life 50 minutes 30 minutes 10 minutes
Set Time 1–2 hours 1–2 hours 30–60 minutes
Cure Time 2–3 days 5 hours (70˚C) 1–2 days
Shear Strength >20 MPa 57 MPa (tensile) 22 MPa
Loctite® uK 1370™ B10™ (Putty)Fast-curing, abrasion-resistant putty for timely repairs and superiordurability with gap fill capabilities of up to 10mm.
ProduCts
Before After
*CallHenkelTechnicalSupportforcurrentpartnumbersandpackagesizes:1-800-562-8483.
4 5www.henkelna.com/windpower
Blade Maintenance
Tip Repair (patching, structural cracks & cracks at stress risers)
Rotor blade tip damage can be significant and structural in nature, requiring a new tip or a structural patch to be used for the repair.
To Apply:
•Surfaceshouldbeclean,dryandabraded.
•Damagedsubstratematerialshouldbe removed from the repair area.
•BondinthestructuralpatchusingLoctite® UK 1351™B25™ structural bonding adhesive.
•Sandorgrindtheedgesofthepatch.
•MixtheLoctite® UK 1370™B10™ Putty and apply using a trowel to smooth the product over the damaged area.
•Sandafter30 minutes.
Before After
Loctite® uK 1351™ B25™ (Structural Bonder) GL-certified, cartridge-dispensed polyurethane with 50 minutes of working life.
Loctite® uK 1370™ B10™ (Putty)Polyurethane putty has a work life of 10 minutes and can be sanded in 30 minutes.
ProduCts
6
Blade Maintenance
Step 1 - Prep
Filldamagedcoreareaorbondinanewpiece of core material using Loctite® UK 1351™B25™ structural bonding adhesive.
Step 2 - Patch
MixandapplytheLoctite® UK 1405™ hand lay-up resin to the fiber reinforce-ment and apply to the damaged area. Loctite® UK 1405™ can be cured at room temperature or with heat. Putty can be applied after 1-2 hours at roomtemperature.
Step 3 - Sand & Finish
Oncecured,mixtheLoctite® UK 1370™ B10™ Putty and apply using a trowel to smooth the product over the damaged area.Sandafter30 minutes.
Impact damage (lightning & bird strikes)
Damagefromimpactpenetratesintothebladeandcanrequirearepairofthecorematerial,thebladesubstrate,and the surface of the blade in order to get the blade back in service.
Loctite® uK 1351™ B25™ (Structural Bonder) GL-certified, cartridge-dispensed polyurethane with 50 minutes of working life.
Loctite® uK 1405™ (Hand Lay-up Resin)Low Viscosity, structural polyurethane resin for hand lay-up.
Loctite® uK 1370™ B10™ (Putty)Polyurethane putty has a work life of 10 minutes and can be sanded in 30 minutes.
ProduCts
Impact Damage
To Apply:
Surfaceshouldbeclean,dryandabraded.Damagedsubstratematerialshouldberemoved from the repair area.
6 7
0
5
10
15
20
25
30
10,000,000100,000 1,000,00010,000
Load Cycles N
Shea
r St
reng
th M
Pa
Loctite® Polyurethanes*Standard wind energy epoxy
www.henkelna.com/windpower
Blade Maintenance
Blade Cleaning
Loctite®NaturalBlueisawater-based,environmentallyfriendlycleaner/degreaserspecificallyformulatedfor cleaning dirt and debris build-up on blades and towers. Apply using cloth, spray or high-pressure spray. Safeforuseonbothplasticsandmetals.
Lightning diverter Applications
Lightning diverter strips – designed to transmit and ground electricity from lightning strikes on blades – arebondedusingTeroson®MS930™. Refer to properties chart on page 18 for specifications.
* Loctite® Polyurethane adhesives show superior performance when tested against typical epoxiesinfatiguetesting.
8
Nacelle Maintenance
Sealing*
Nacelle Panel Sealing
Nacellepanelsareconstantlyexposedtotheelements.Sealingthesepanelsisanextremely important part of keeping the internal electrical and mechanical components protected.
To Apply:
•Surfaceshouldbecleananddry.
•ApplyTeroson®MS930™ sealant using a pneumatic or hand dispenser.
•Dispensetheproductbetweentwomatingsur-faces or into a seam with the dispense tip.
To Apply:
•Surfaceshouldbecleananddry.
•ApplytheLoctite® 5188TManaerobic sealant using a pneumatic or hand dispenser.
•Applymaterialbetweentwomachined mating surfaces.
•Tightentheflangesassoonaspossible after dispense.
Yaw Bearing and Gearbox Flange Sealing
•Securesyawbearingtomainframeandyaw bearing to brake disc.
Teroson® MS 930™
One-part, high-flexibility, silane modified polymer, which cures by reaction with moisture to a soft elastic product. The material is free of solvents, isocyanates, silicones, and PVC, and is odorless. It demonstrates good adhesion to many substrates and is compatible with suitable paint systems.
Loctite® 5188™Single-component anaerobic sealant for yaw bearings andgearbox flanges.
ProduCts
*Multiplesealingoptionsavailable.SeeselectorchartonINSIDEBACKCOVER
GEARBOx MAINTENANCE
Henkel offers dozens of products specifically designed to
optimize the performance of gearboxes, including thread-
lockers and thread sealants, retaining compounds, gasket
removers, anti-seize
compounds, repair
epoxies and instant
adhesives. For more
information, request a
copy of our Industrial
Gearboxes Service
Manual (LT-4872).
8 9
YawBearing Sealing
NacellePanel Sealing
Threadlocker
www.henkelna.com/windpower
Nacelle Maintenance
PROduCT Teroson® MS 930™ LOCTITE® 5188™
Part Number264872 – White100139 – Grey
1241991
Package Size 310 ml cartridge 300 ml cartridge
Cured State Flexible Rigid
Functional Cure Time 24 hours 24 hours
10
Nacelle Maintenance
Anti-Slip
Nonskid on Top of Nacelle
Gel-coatandpaintedsurfacescanbeveryslipperytowalkon,andatthetopofaturbineit’simportanttohavetraction for safety. When accessing the outside of a wind turbine, a good walking surface helps maintenance crews deal with cold, wet, and icy conditions.
To Apply:
•Surfaceshouldbeclean,dryandabraded.
•Mixandapplyprimerasneeded. (Primer choice depends on the surface.)
•PourtheBigFoot®AcrylicPedestrianGrade product onto the surface in ribbons.
•Spreadthematerialusingarollerandallow 4–24 hours for cure.
To Apply:
•Surfaceshouldbeclean,dryandabraded.
•Mixandapplyprimerasneeded. (Primer choice depends on the surface.)
•PourtheBigFoot®HeavyDutyPedestrianGrade product onto the surface in ribbons.
•Spreadthematerialusingarollerandallow 12–72 hours for cure.
Nonskid Inside of the Nacelle
Walking surfaces inside of the nacelle can be slippery and dangerous because of the lubricants and coolants used in the power train.
Big Foot® Acrylic Pedestrian GradeSingle-component elastomeric coa-ting ideal for anti-slip applications on flexible surfaces and outdoors.
Big Foot® Acrylic PrimerSingle-component water-based pri-mer for use with Big Foot® Acrylic Pedestrian grade.
Big Foot® Heavy duty Pedestrian GradeAnti-slip coating ideal for heavy pe-destrian traffic and light rolling traffic.
Big Foot® Metal PrimerTwo-component epoxy-polyamide primer for increased adhesion to metal.
ProduCts
COMPONENT CLEANING
Pro-Strength Parts Cleaner is a powerful solvent-
based solution that dissolves and removes oil
and grease stains from turbine components and
equipment. Loctite® Hand Wipes are handy,
premoistened towelettes containing a powerful
cleaning formula and mild abrasive for removing
even the toughest grime.
10 11
NonskidonTopofNacelle
www.henkelna.com/windpower
Nacelle Maintenance
PROduCTBIG FOOT® ACRYLIC PEdESTRIAN GRAdE
BIG FOOT® HEAvY duTY
BIG FOOT® ACRYLIC PRIMER
BIG FOOT® METAL PRIMER
Part Number 95591 – Grey36045 – Black
96261 – Grey96211 – Black 95581 96132
Package Size 1 gallon can 1 gallon can 1 gallon can 1 gallon kit
Mix Ratio (weight) Single- component
Single- component
Single- component 3.2:1
Coverage 70 sq. ft. 50 sq. ft. 250 sq. ft. 250 sq. ft.
Functional Cure Time 4–24 hours 12–72 hours 1–2 hours 12 hours
12
Tower Maintenance
Tower & Platform Sealing WindTurbinetowersareputupinsectionsandmustbesealedtokeepmoistureouttopreventcorrosion.Thereare also platforms put in place, which keep water and chemicals from falling down the tower from above.
To Apply:
•Surfaceshouldbecleananddry.
•ApplyTeroson®MS930™ sealant using a pneumatic or hand dispenser.
•Dispensetheproductbetweentwomatingsurfaces or into a seam with the dispense tip.
•WhenusingLoctite® 5590™, the product must be mixedinamixnozzle.
PROduCT TEROSON® MS 930™ LOCTITE® 5590™
Part Number 264872 – White 1091896 – Black
Package Size 310 ml cartridge 400 ml cartridge
Cured State Flexible Flexible
Skin Time 40 minutes 25 minutes
Teroson® MS 930™
One-part, high-flexibility, silane modified polymer, which cures by reaction with moisture to a soft elastic product. The material is free of solvents, isocyanates, silicones, and PVC, and is odorless. It de-monstrates good adhesion to many substrates and is compatible with suitable paint systems.
Teroson® MS 939™ *Single-component, non-sagadhesive designed for panelbonding, metal & plastic substrates, and painted surfaces.
Loctite® MS 5590™
A two-component adhesive for structural elastic bonding where the curing rate of one-compo-nent adhesives is too slow for bonding of various components.
Applications:
A.Sealingbetweentowersections B.Sealingloadsupportplate C.Sealingofplatformsections D.Sealaroundboltheads for platform
ProduCts
*Seechartofpage18 for specifications
12 13
Before After
Before After
www.henkelna.com/windpower
Tower Maintenance
Corrosion Protection Metalcomponentsofwindturbinesarepronetocorrosionbecausetheyareconstantlyexposedtotheelements.Coating corroded and damaged areas with a galvanized-type coating will provide protection while the compo-nents are covered and continue to protect when the coating is damaged.
To Apply:
•Removeexistingrustandcontaminants.Surface should be clean, dry and abraded.
•ShaketheLoctite®ColdGalvanizingcompound vigorously and apply to the prepared area.
PROduCTLOCTITE® COLd GALvANIzING COMPOuNd
LOCTITE®
NORdBAK® CHEMICAL RESISTANT COATING
Part Number 82039 96092
Package Size 15 oz. aerosol 12 lb. kit
Color Grey Light Grey
Coating Base 92% zinc Epoxy
Cure Time 15 minutes 16 hours
Loctite® Cold Galvanizing CompoundSprays on metal surfaces to prevent corrosion even when the surface is scratched. Ideal touch-up for welded seams. Highly resistant to salt corro-sion and water. Not resistant to acid or alkaline solutions. Contains no ozone-depleting compounds.
Loctite® Nordbak® Chemical Resistant CoatingSmooth, glossy, epoxy coating that protects against extreme chemical attack and corrosion.
Applications:A. Ladder frames B.Galvanizedparts C. Metal surfaces
ProduCts
14
Tower Maintenance
Ladder Bonding Climbing ladders will cause vibration and stress between each of the sections and between the ladder and the tower itself. Adhesives can help to reduce failures and create a safer, unitized structure.
To Apply:
Threadlocking
•Cleanallsurfaces(externalandinternal)withaLoctite® cleaning solvent and allow to dry.
•Ifthematerialisaninactivemetalorthecurespeedis too slow, spray all threads with Activator 7471™ or 7649™ and allow to dry.
•Applyseveraldropsoftheproductontotheboltatthenut engagement area.
•Forwickinggradeproducts(Loctite® 290™), apply the ad-hesive after the bolt is threaded into the nut or housing and allow the adhesive to penetrate the threads from the outside.
Structural Bonding
•Surfaceshouldbecleananddry.•Applytheadhesiveusingapneumaticormanualdispenser.•Dispensetheproductbetweentwomating
surfaces or into a seam with the dispense tip.•Whenusingtwo-partproducts,useastatic mixnozzlefordispensing.
Elastomeric Sealing
•Surfaceshouldbecleananddry.•Dispensetheproductbetweentwomatingsurfacesor
into a seam with the dispense tip.•WhenusingLoctite® 5590™,theproductmustbemixedinamixnozzle.
Loctite® 290™Wicking grade threadlocker penetrates threads by capillary action. Secures set screws and other assemblies after settings are completed. Seals welds and porous metal part. Threadlocker may be applied after the fasteners are already in place.
Loctite® 2700NA™General-purpose threadlocking adhesive for fasteners 1/4" to 3/4". Permenant strength and enhanced for health and safety.
Loctite® uK 1351™ B25™GL-certified, cartridge-dispensed polyurethane with 50 minutes of working life.
Loctite® uK 1366™ B10™Flexible, cartridge-dispensed polyurethane with 30 minutes of working life.
Teroson® MS 939™Single-component , high viscosity adhesive for elastic bonding of painted and metal substrates.
Loctite® 5590™A two-component adhesive for structural elastic bonding where the curing rate of one-component adhesives is too slow for bonding of various components.
ProduCts
dOOR SEALING
Loctite® 411™ is a cyanoacrylate (instant
adhesive) that is ideal for bonding rubber seals
around the outer edges of doors and door
frames. The bond is immediate – and perma-
nent – with excellent adhesive properties under even the
most extreme weather conditions. For specifications, see
chart on page 19.
14 15www.henkelna.com/windpower
Tower Maintenance
PROduCT LOCTITE® 290™LOCTITE® 2700NA™
Part Number 2903129041
15261231526565
Package Size50 ml bottle250 ml bottle
50 ml bottle250 ml bottle
Color Green Red
Fixture Time 20 minutes 5 minutes
Cure Time 24 hours 24 hours
PROduCT uK 1351™ B25™ uK 1366™ B10™
Part Number 1667557 1668032
Mix Ratio 2:1 4:1
Work Life 50 minutes 10 minutes
Set Time 1–2 hours 40 minutes
Cure Time 2–3 days 2–3 days
Shear Strength >20 MPa >10 MPa
PROduCTTEROSON® MS
939™LOCTITE®
5590™
Part Number 97325 – White99164 – Grey 1091896 – Black
Package Size 310 ml cartridge400 ml dual
cartridge
Cure Time Flexible Flexible
Skin Time 40 minutes 25 minutes
Threadlocking LaddertoTower
ThreadlockingbetweenLadderSections
Bonding LaddertoBase
BondingLadder
16
Base Maintenance
Tower Flange Grouting
Cranesareanimportanttoolforinstallationofawindturbine,andtheycanalsobeoneofthelargestexpenses fortheinstallation.Fastcuringepoxygroutmaterialswillensurethatyourtowerislevelandsecure,anditwillhelpyougetthatcraneontothenextwindturbine.
To Apply:
•Surfaceshouldbeclean,dryandabraded.•Setthedaminplacetoprovideanareatopourthegrout. SealthebottomofthedamtotheconcretebaseusingLoctite®UrethaneSealanttoensuregoodgreenstrengthand eliminate leaking of the grout.
•PourtheLoctite®DeepPourGrout,fillingthecavityuntil theproductfillsabovethetowerflange.
•CleananyspillsusingLoctite® Hand Wipes.•Damscanberemovedorleftinplaceandpainted.
PROduCTLOCTITE® FIxMASTER dEEP POuR GROuT
LOCTITE® uRETHANE SEALANT
Part Number 99545 39916
Package Size 5 gallon kit 10.2 oz. cartridge
Color Black Grey
Work Time 30 minutes 2–4 hour skin time
Cure Time 24 hours 3 daysCable Sealing
Cables are routed out of the wind turbine through the base to deliver electricity and this area must be sealed tostopwater/moisturefromenteringtheturbineinordertopreventcorrosion.
To Apply:
•Surfaceshouldbecleananddry.
•ApplytheTeroson®MS939™ sealant using a pneumatic or hand dispenser.
•Dispensetheproductaround the cables ensuring a good seal between each of the cables and the walls.
Teroson® MS 939™One-part, high-flexibility, silane modi-fied polymer, which cures by reaction with moisture to a soft elastic product. The material is free of solvents, isocyana-tes, silicones, and PVC, and is odorless. It demonstrates good adhesion to many substrates and is compatible with suita-ble paint systems.
See chart on p. 17.
Loctite® Fixmaster® deep Pour GroutAggregate filled epoxy system for pours up to 6" deep, including self-leveling applications under rails and sole plates. It is a high strength material that bonds to steel, concrete and other construction materials and withstands high torque loads.
Loctite® urethane SealantSingle-component polyurethane seal-ant that bonds, seals and waterproofs up to 180ºF.
ProduCts
ProduCts
16 17www.henkelna.com/windpower
Base Maintenance
Concrete Pad Repair
Damageandcracksinconcretepadswillcontinuetodeteriorateovertimeduetoexposuretooutdoorele-ments. Repairing these damaged areas will significantly increase the life of the concrete structure.
To Apply:
Concrete Repair•Surfaceshouldbeclean,dryandabraded.•Removeorcuttheedgesoftherepair
to avoid feathering.•MixLoctite® Magna-Crete™ to the desired
consistency for the repair.•ApplyLoctite® Magna-Crete™ to the repair
area using a trowel.•Finishtherepair.
Crack Repair•Cleanoutthecrackandremoveloose
aggregate and debris.•Dispenseproductthroughamixnozzle intothecrack;keepmixnozzlein the crack during dispense.
•Smoothexcessmaterialwithatrowel.
Loctite® Fixmaster® Crack Filler NSTwo-part, non-sag epoxy for repairing cracks and holes in vertical or horizontal concrete surfaces.
Loctite® Magna-Crete™Two-part magnesium phosphate material that sets rapidly and has very high green strength.Bonds to concrete and other constructionmaterials. There is also no water additive so it may be applied at temperatures as low as -15ºF.
ProduCts
PROduCTLOCTITE®
MAGNA-CRETE™
LOCTITE® FIxMASTER®
CRACK FILLER NS
Part Number 9555195555 1108886
Package Size
1 gallon kit5 gallon kit
8.6 oz. cartridge
Color Grey Grey
Work Time 5–20 minutes 8 minutes
Cure Time 1–2 hours 2 hours
PROduCT TEROSON® MS 939™
Part Number 97325 – White
Package Size 310 oz. cartridge
Cure State Flexible
Functional 24 hours
Before
After
18
ProductPart
NumberDescription Fastener Size Strength Cure Time
(Fixture/Full Strength) Breakaway/Prevailing Torque
LoCTiTe®
ThreaDLoCkerS
2400Na™ 1626122 Threadlocker ¼" to ¾" Medium 5 minutes/24 hours 160/20
2700Na™ 1526565 Threadlocker ¼" to ¾" High 5 minutes/24 hours 300/265
277™ 27741 Threadlocker > 7/8" High 60 minutes/24 hours 275/275
2047™ 1134607 Threadlocker > 7/8" High 90 minutes/24 hours 375/80
290™ 29041 Wicking Grade Threadlocker Up to ½" High 20 minutes/24 hours 90/260
ProductPart
NumberDescription appearance Viscosity (cP) Work Life Fixture Time Cure Time Shear Strength (psi)
LoCTiTe®
aDheSiVeS
Uk 1351 B25™ 1667557 Polyurethane Green 29,000 50 minutes 75 minutes 3 Days > 2360
Uk 1366™ B10™ 1668032 Polyurethane Green 34,000 30 minutes 35 minutes 3 Days > 1550
Uk 1370™ B10™ putty * Polyurethane Green Putty 10 minutes 30 minutes (sandable) 3 Days > 2900
Uk 1405™ * Polyurethane Green 250 30 minutes 1–2 hours2 Weeks RT 5 hours @
70˚C
> 8000 psi (tensile strength)
ProductPart
NumberDescription appearance Skin Time hardness
(Shore a)Tensile
Strength elongation at Break (%)
LoCTiTe® eLaSTomeriC aDheSiVeS & SeaLaNTS
Teroson® mS 930™264872†
100139†
237971†Elastomer
White Grey Black
25 minutes 25 135 490
Teroson® mS 939™97325†
99164†
100146†Elastomer
White Grey Black
10 minutes 55 435 250
Teroson® mS 9360™ 41379 Elastomeric Adhesive Black 10 minutes 50 500 200
Locite® 3310™
1552799**1552800**1552798**
Elastomeric Sealant
White Grey Black
70 minutes 32 135 666
Loctite® 5590™ 1091896 Elastomeric Adhesive/Sealant Black 25 minutes 60 435 130
Loctite® Urethane Sealant 39916 Elastomeric Sealant Grey 12 hours 33 200 1000
Loctite® 5188™ 1241991 Anaerobic Flange Sealant Red 1 hour
cure time N/A 610 psi 186
Machinery Adhesives
Product Properties Charts
Structural Adhesives
Elastomeric Adhesives & Sealants
*CallHenkelTechnicalSupportforcurrentpartnumbers1-800-562-8483.
** 300 ml cartridge † 310 ml cartridge
1918 19
ProductPart
NumberDescription appearance Drying Time odor
LoCTiTe® CLeaNerS
Natural Blue®8225182253209805
Cleaner – 1 Gal. Cleaner – 5 Gal. Cleaner – 55 Gal.
Blue Liquid Equivalent to Water Evaporation Fragrance Free
Pro Strength Parts Cleaner 30548 Cleaner Clear Liquid 5 minutes Mild Solvent
hand Wipes 3494334944
Cleaner – 75 Ct. Cleaner – 130 Ct. White Wipe 1 to 5 minutes Citrus
ProductPart
NumberDescription appearance Compressive
Strength Working Time Cure Time
LoCTiTe® groUT/ CoNCreTe rePair
Fixmaster® Deep Pour grout 99545 Grout Black 14,500 psi 30 minutes 24 hours
Fixmaster® Crack Filler NS 1108886 Crack Repair Grey 9800 psi 8 minutes 2 hours
Fixmaster® magna-Crete™ 95551 Concrete Repair Grey 13,000 psi 15 minutes 1 hour
ProductPart
NumberDescription appearance Dry Time/Work Life Cure Time
LoCTiTe® CoaTiNgS
Cold galvanizing Compound 82039 Protective Coating for Corrosion Grey 15 minutes N/A
Chemical resistant Coating 96092 Chemical Resistant Coating Grey 20 minutes 48 hours
Big Foot® metal Primer 96132 Primer Coating Grey 240 minutes 12 hours
Big Foot® acrylic Primer 95581 Primer Coating Clear N/A 1–2 hours
Big Foot® acrylic Pedestrian grade
95591***36045*** Antislip Coating Grey
Black 4 hours 24 hours
Big Foot® heavy Duty Pedestrian grade
96261*** 96211*** 40302***
Antislip CoatingGrey Black
Safety Yellow12 hours 72 hours
ProductPart
NumberDescription appearance Shear Strength Fixture Time Cure Time
LoCTiTe® iNSTaNT aDheSiVe
411™ 135446 Instant Adhesive Clear 3200 psi 30 seconds 24 hours
Instant Adhesive
www.henkelna.com/windpower
Build it. Bond it. Fix it.
Grout / Concrete Repair
Cleaners
Coatings
*** 1 gallon can
Except as otherwise noted, all marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office. Magna-Crete and Magna-Grout are trademarks of Kelly Restoration. © Henkel Corporation, 2012. All rights reserved. 9309/LT-6531 (08/12)
U.S.A.Henkel CorporationEngineering AdhesivesOne Henkel WayRocky Hill, Connecticut 06067Tel: 1.800.Loctite® (562.8483)Tel: 860.571.5100Fax: 860.571.5465
www.henkelna.com/windpower
CanadaHenkel Canada CorporationEngineering Adhesives2515 Meadowpine Blvd.Mississauga, Ontario L5N 6C3Tel: 1.800.263.5043 (within Canada)Tel: 905.814.6511Fax: 905.814.5391