WORKSHOP PROGRAM (Frontier 2011) December 4th, 2011 Sunday <Sakura Hall 1F> 15:00-20:00 REGISTRATION & WELCOME RECEPTION December 5th, 2011 Monday <Sakura Hall 2F> 9:00-10:30 OPENING CEREMONY

(10:30- 11:00 Coffee Break at Foyer) Session I. Materials and Devices for Information/Communication 1 Chair Prof. M. Yamashita <Collaboration 1> Phase Transition 11:00-11:30 “Looking at structural transformation with spatial and temporal high resolution”

Laurent Guérin IPR, U. Rennes 1 “Ultrafast electron and lattice dynamics of photoinduced phase transition” Shinichiro Iwai Graduate School of Science, Tohoku University 11:30-11:40 Discussion

(11:40-13:20 Lunch) Session II. Materials and Devices for Information/Communication 2 Chair Prof. S. Iwai <Collaboration 2> Spintronics 13:20-13:50 “Directing the functionality of a material by light”

Hervé Cailleau IPR, U. Rennes 1 “Quantum Molecular Spintronics Based on Single-Molecule Magnets”

Masahiro Yamashita Graduate School of Science, Tohoku University 13:50-14:00 Discussion

<Collaboration 3> Nanodevices 14:00-14:30 “Polysilicon nanowires compatible with MOS technology for integrated bio-sensing applications”

Anne-Claire Salaün, G. Godem-Wega, E. Jacques, R. Rogel and L.Pichon IETR, U. Rennes 1

“Real-time monitoring of mitochondrial ATP synthesis and hydrolysis by surface infrared spectroscopy”

Michio Niwano RIEC, Tohoku University 14:30-14:40 Discussion

(14:40-15:00 Coffee Break at Foyer) Session III. Materials and Devices for Information/Communication 3 Chair Prof. D. Morineau <Collaboration 4> Nanoliquids 15:00-15:30 “Structure of nanoconfined binary liquids”

Ronan Lefort and Denis Morineau IPR, U. Rennes 1 “Organization of Liquids Adsorbed at Solid-Liquid Interfaces in Binary Liquid Mixtures”

Masashi Mizukami, M. Guendouz, D. Morineau, Kazue Kurihara WPI-AIMR/IMRAM, Tohoku University and CNRS, U. Rennes 1

15:30-15:40 Discussion <Proposal> 15:40-16:10 "Atomically controlled processing for group IV semiconductors" Junichi Murota and Masao Sakuraba REIC, Tohoku University "Fabrication of Room-Temperature Resonant Tunneling Diode with Atomically Controlled Strained Si1-XGeX/Si Quantum Heterostructure"

Masao Sakuraba and Junichi Murota REIC, Tohoku University 16:10-16:20 Discussion 17:30-19:30 APERITIF at Sakura Hall 1F

December 6th, 2011 Tuesday <Sakura Hall 2F> Session IV. Advanced Materials 1 Chair Prof. M. Umetsu <Collaboration 5> Catalyst 9:00-9:30 “Sendai-Rennes, a road paved with Gold. Recent developments in homogeneous catalysis”

Pierre van de Weghe SCR, U. Rennes 1 “Molecular transformation with nanoporous materials skeleton catalysts” Naoki Asao WPI-AIMR, Tohoku University 9:30-9:40 Discussion Chair Prof. S. Suzuki <Collaboration 6> Glass 9:40-10:40 "Designing glasses to meet specific mechanical properties"

Tanguy Rouxel, LARMAUR, U. Rennes 1 “Nano-Power Active Fiber Devices in Electro-Optic Crystallized Glass -nanometric heterogeneity and crystallization in glass-”

Takumi Fujiwara, Graduate School of Engineering, Tohoku University “Hypoeutectic Zr-Based Metallic Glasses with Good Mechanical Properties and Precise Thermoplastic Molding Ability” Yoshihiko Yokoyama IMR, Tohoku University

“Experimental Characterization of Atomic Structure of Metallic Glasses Akihiko Hirata and Mingwei Chen WPI-AIMR, Tohoku University

10:40-10:55 Discussion

(10:55-11:10 Coffee Break at Foyer) Chair Prof. A. Chiba <Collaboration 7> Metals 11:10-11:50 “Hot working behavior of Co-29Cr-6Mo-0.16N alloy”

Yunping Li, Ning Tang, Hiroaki Matsumoto and Akihiko Chiba IMR, Tohoku University

“Residual stress tensor measurement in micro-area” Shun-Ichiro Tanaka IMRAM, Tohoku University “New type of Ti-6Al-4V alloy with ultra-fine grained microstructure for enhancing superplasticity” Hiroaki Matsumoto, Liu Bin, Yunping Li, Sang-hag Lee, Yoshiki Ono and

Akihiko Chiba IMR, Tohoku University 11:50-12:00 Discussion

(12:00-13:00 Lunch) Session V. Advanced Materials 2 Chair Prof. S.-I. Tanaka <Introduction> 13:00-13:30 “Presentation of Institut des Materiaux Jean Rouxel from Nantes - Focus on some results on nanotubes based materials”

Olivier Chauvet Institut des Matériaux Jean Rouxel 13:30-13:40 Discussion <Proposal> 13:40-14:10 “Recombinant Protein Engineering for Biofunctionalization of Nanomaterials”

Mitsuo Umetsu, Tadafumi Adschiri, Izumi Kumagai Graduate School of Engineering, Tohoku University

“Soft Solution Synthesis of ZnO Powders/ Films with Developed Superstructures” Shu Yin and Tsugio Sato IMRAM, Tohoku University 14:10-14:20 Discussion 14:30-16:30 POSTER SESSION + (Coffee) <Sakura Hall 1F> 18:00-20:00 BANQUET <Sakura Hall 1F> December 7th, 2011 Wednesday <Sakura Hall 2F> Session VI. Materials Processing Chair Prof. J. Kano <Collaboration 8> Powder Technology 9:00-9:30 “Mechanochemical Dechlorination of PVC and Formation of Hydroxyapatite from the Residue”

Qiwu Zhang, Junya Kano, Fumio Saito, Michel Baron and Ange Nizhou IMRAM & Ecole des Mines d'Albi-Carmaux

“Green pharmacy: Synthesis of dibenzophenazines by solvent-free co-grinding” Supplement by Michel Baron Ecole des mines d’Albi-Carmaux

9:30-9:40 Discussion

<Collaboration 9> Powder Technology 9:40-10:10 “Experiment and simulation of dry particle coating”

Akira Sato and Michel Baron EMAC “Improvement of separability of CuO in flyash by coating with S” Qiwu Zhang, Junya kano, Fumio Saito, Akira Sato and Michel Baron IMRAM and EMAC 10:10-10:20 Discussion

(10:20-10:40 Coffee Break at Foyer) 11:00-11:30 CLOSING CEREMONY

(11:30-13:00 Lunch) 14:10- 16:00 LABORATORY TOURS (IMR, RIEC, IMRAM, WPI-AIMR) 17:00-19:00 FAREWELL PARTY <Auditorium> December 8th, 2011 Thursday 8:30-18:30 CONFERENCE TOUR (Hiraizumi-UNESCO World Heritage)

PROGRAM FOR POSTER SESSION (Frontier2011) Dec. 6th, 2011, PM at Sakura Hall 1F 1. FRENCH RESEARCH ORGANIZATION P-1 “Exothermal map of RTM6 cure”

Florentin Berthet, Sawsane Nakouzi , Fabrice Schmidt and Yannick le Maoult *ICA-Albi – Université de Toulouse ;INSA,UPS, Mines Albi, ISAE ;ICA (Institut Clément Ader) Ecole des Mines d’Albi-Carmaux, CROMeP, France Campus Jarlard, Route de teillet, F-81013 Albi CT cedex 09, France

P-2 “Weft-knitted composites: Relationships between fabric architecture and

mechanical properties of the injected composite” Laura Balea 1, Gilles Dusserre 1 , Gérard Bernhart 1 1 Université de Toulouse ; Mines Albi, INSA, UPS, ISAE, ICA (Institut Clément ADER) ; Campus Jarlard, F-81013 Albi cedex 09, France

P-3 “Accurate strain analysis of Titanium sheet in Single Point Incremental Forming

Process by Digital Image Correlation” Y. Balcaen, L. Robert, V. Velay, V. Vidal, P. Lours Université de Toulouse ; INSA, UPS, Mines Albi, ISAE ; ICA (Institut Clément Ader) ; F-81013 Albi cedex 09, France

P-4 “Comparative study, in textured alpha-titanium alloy sheets, of the deformation

mechanisms induced by incremental forming and monotonic straining” Yannick Balcaen 1, Vanessa Vidal 1 , Philippe Lours 1 , Vincent Velay 1, Laurent Robert 1, Florence Pettinari-Sturmel 2 , Joël Douin 2 1 Université de Toulouse ; Mines Albi, ICA (Institut Clément Ader) ; Campus Jarlard, F-81013 Albi cedex 09, France 2 CEMES – CNRS ; 29, rue Jeanne Marvig, BP 94347, 31055 Toulouse cedex 04, France

P-5 “Analysis of PEEK crystallinity exposed to isotherm and anisotherm cooling

conditions and modeling of crystallization kinetic” Emeline Bessard, Olivier De Almeida, Gérard Bernhart Université de Toulouse ; Mines Albi, INSA, UPS, ISAE, ICA (Institut Clément ADER); Campus Jarlard, F-81013 Albi cedex 09, France

P-6 “Experiment and simulation of dry particle coating”

A. Sato1),2), A. Chamayou1) , L. Galet1) , M. Baron1) , E. Serris2) , P. Grosseau2) , G. Thomas2)

1) Ecole des Mines d’Albi Carmeaux, Centre Rapsodee FRE CNRS 3213, Université de Toulouse, Campus Jarlard, 81013 Albi, France 2) Ecole Nationale Supérieure des Mines de Saint Etienne Centre SPIN/ LPMG-FRE 3312, 158 cours Fauriel, 42023 Saint-Etienne, France

2. TOHOKU UNIVERSITY, GLOBAL COE, Materials Integration P-11 “Studying of High Magnetization of Fe-Si-B-P-Cu Powder”

Yan Zhang1, a, * and Akihiro Makino2 1 Graduate School of Engineering, Tohoku University, Sendai 980-8577, Japan 2 Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

P-12 “New Fe-B-P-Cu nanocrystalline soft magnetic alloys with high Bs combined

with low coercivity Hc” Zeqiang Zhang1*,a, Parmanand Sharma2,b, Akihiro Makino2,c

1Graduate School, Tohoku University, Sendai 980-8577, Japan 2Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

P-13 “Young’s modulus changeable β-type binary Ti-Cr alloys for spinal fixation

applications” X.F. Zhao1,a, M. Niinomi2,b, M. Nakai2,c, J. Hieda2,d 1Graduate Student, Tohoku University, 6-6 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan 2Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

P-14 “Development of a Co-based alloy FSW tool for steels and Ti alloys”

M. Miyake1,*, Y.S. Sato1, H. Kokawa1, Y. Takaku1, T. Omori1, K. Ishida1, S. Imano2, S. H. C. Park2 and S. Hirano2 1Department of Materials Processing, Graduate School of Engineering, Tohoku University; 6-6-02 Aramaki-aza-Aoba, Aoba-ku, Sendai 980-8579, Japan 2Materials Research Laboratory, Hitachi, Ltd; 7-1-1 Omika-cho, Hitachi 319-1292, Japan

P-15 “Difference of Microstructure and Fatigue Properties between Forged and

Rolled Ti-6Al-4V” Yoon Seok Lee1, a, Mitsuo Niinomi2, b, *, Masaaki Nakai2, c, Junko Hieda2, d

Takashi Maeda3, e, Yoshihisa Shirai3, f and Ikuhiro Inagaki3, g 1Graduate Student, Tohoku University, 6-6 Aoba, Aramaki, Aoba-ku, Sendai, Japan 2Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Japan 3Sumitomo Metal Industries, Ltd., 1-109 Shimaya 5-chome, Konohana-ku, Osaka, Japan

P-16 “Continuous dynamic recrystallization during warm deformation of tempered

lath martensite” U.H. Lee1,a, N. Kamikawa1,b, G. Miyamoto1,c, T. Furuhara1,d, * Institute for Materials Research, Tohoku University, 2-1-1, Katahira, Aoba-ku,

Sendai, 980-8577, JAPAN P-17 “Effect of phosphorus on the microstructure, mechanical properties, and the

formation of retained austenite in TRIP steels” Eui Pyo Kwona, *, Shun Fujiedab, Kozo Shinodac and Shigeru Suzukid Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira Aoba-ku, Sendai 980-8577, Japan

P-18 “Solubility of Sulfide in Molten and Solid Oxides”

Kyung-Ho KIM1, a*, Hiroyuki SHIBATA2, b and Shin-ya KITAMURA2, c 1Graduate School of Engineering, Tohoku University, Japan 2Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, Japan

P-19 “Composition Change of Inclusions by the Reaction between Slag and Molten

Steel” Akifumi Harada 1, a,*, Gaku Miyano 1, b, Nobuhiro Maruoka 2, c, Hiroyuki Shibata 2, d and Shin-ya Kitamura 2, e 1 Student, Graduate School of Engineering, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan 2 Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

P-20 “Co additional effect on the plastic deformability and the glass-forming ability

in the Ti-based bulk metallic glass” E. S. PARK1a, H. KATO2b, T. WADA2c, X. M. WANG2d, A. MAKINO2e, A. INOUE3f

1. Department for material science, graduate school of engineering, Tohoku University sendai 980-8577, Japan 2. Institute for Material Research, Tohoku University, sendai 980-8577, Japan 3. Tohoku University, sendai 980-8577, Japan

P-21 “Dynamic strain aging in biomedical-grade Co–Cr–Mo alloys with nitrogen

addition” Kenta Yamanaka1,a, Manami Mori2,b, Yunping Li3,c, Yuichiro Koizumi3,d and Akihiko Chiba3,e,* 1Department of Materials Processing, Graduate School of Engineering, Tohoku University, 6-6-02 Aoba-yama, Sendai 980-8579, Japan 2NISSAN ARC, LTD., 1 Natsushima-cho, Yokosuka 237-0061, Japan 3Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

P-22 “Microstructure and mechanical properties of a biomedical β-type titanium alloy subjected to severe plastic deformation after aging treatment” H. Yilmazer1,a,*, M. Niinomi2,b, M. Nakai2,c, J. Hieda2,d, T. Akahori3,e and Y.Todaka4, f 1 Graduate Student, Tohoku University, Sendai 980–8579, Japan 2 Institute for Materials Research, Tohoku University, Sendai 980–8577, Japan 3 Department of Materials Science and Engineering, Faculty of Materials Science and Technology,Meijo University, Nagoya 468-8502, Japan 4 Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi 441–8580, Japan

P-23 “Microstructure of Titania Films Prepared by Laser Chemical Vapor Deposition” Ming Gaoa, Akihiko Itob and Takashi Gotoc,* 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 Institute for Materials Research, Tohoku University, Japan

P-24 “Interface reaction behavior between Mn and SiO2 under the influence of

electric field” Byeong Taek Baea, Hideaki Nakanob, Junichi Koikec Department of Materials Science, Tohoku University 6-6-11-1016, Aza-Aoba, Aramaki, Aoba-ku, Sendai

P-25 “Strain Recovery Depended Structural Relaxation: Uniaxial Stress Annealed

Metallic Glass” Hao Wang1, a, Hidemi Kato2,b and Akihisa Inoue3 1School of Engineering, Tohoku University, Sendai 980-8577, Japan 2Institute of Materials Research, Tohoku University, Sendai 980-8577, Japan 3Tohoku University, Sendai 980-8577, Japan

P-26 “Wrinkle Formation Mechanism in Pure Metal and Alloy Casting Made by

Directional Solidification Method using Chills and High Temperature Mold” Ikuzo Goto1, a, *, Sei Horiuchi2 and Koichi Anzai1 1Department of Metallurgy, Graduate School of Engineering, Tohoku University, Sendai, Japan 2Department of Metallurgy, Graduate School of Engineering, Tohoku University, Sendai, Japan (now Mizuho Information & Research Institute, Inc., Tokyo, Japan)

P-27 “Emission Characteristics of Copper Ionic Lines from the 3d95s-3d94p

Transition in a Low-pressure Laser-induced Plasma” Lei Zhang 1, a, *, Kashiwakura Shunsuke 2,b and Kazuaki Wagatsuma 3,c

1,2,3 Institute for Materials Research, Tohoku University, Sendai, Japan

P-28 “Cyclic Hydrogenation and Dehydrogenation Property of Impregnated Lithium Amide” Masaharu Menjo1,2,a, Satoko Moriyama1,2,b, Motoaki Matsuo1,c, Satoshi Semboshi1,d and Shin-ichi Orimo1,e,* 1Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba, Sendai, 980-8577, Japan 2Graduate School of Environmental Studies, 6-6-20 Aza-Aoba, Aramaki, Aoba, Sendai, 980-8579, Japan

P-29 “Ionic Conductivity and Crystal Structure of Mg0.5(Me, Ti)2(PO4)3

(Me = Fe, Mn, Co, Al and Nb)” H. Takahashi1,a,*, T. Kimura2 and H. Takamura1 1Department of Materials Science, Graduate School of Engineering, Tohoku University 6-6-11-301-2-2 Aramaki Aoba, Sendai 980-8579, Japan 2Department of Materials Science, School of Engineering, Tohoku University 6-6-11-301-2-2 Aramaki Aoba, Sendai 980-8579, Japan

P-30 “Luminescence measurement of defect formation in LiTaO3 irradiated by MeV energy ion” K. Hoshi1, a, *, S. Nagata1,b, M. Zhao1,c and T. Shikama1,d 1Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

P-31 “Segregation behavior of MgO-doped lithium niobate during crystal growth

with an electric current injection” C. Koyama1, a, S. Iida2, b, K.Maeda1, c, J.nozawa1, d, S.Uda1, e 1 Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan 2 Mitsubishi materials Co.,Ltd.

P-32 “Magnetotransport and magnetic properties of Co-C granular thin films“

J.G.Kang1, a*, M. Mizuguchi1, b, K. Takanashi1, c 1Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

P-33 “Local Configurational Effects on Piezoelectric Properties of La3Ta0.5Ga5.5O14

and a New Material Design” Chan-Yeup Chung1, a *, Ritsuko Yaokawa2,b, Hiroshi Mizuseki1,c and Yoshiyuki Kawazoe1,d 1Institute for Materials Research, Tohoku University, Miyagi 980-8577, Japan 2Citizen Holdings Co. Ltd., Saitama 359-8511, Japan

P-34 “Soft magnetic properties and magnetic domain structures of nano-granular

Co-Al-N films” Hanae Kijima1, a, Shigehiro Ohnuma1,2,b and Hiroshi Masumoto1,c, * 1Center for Interdisciplinary Research, Tohoku University, 6-3, Aramaki aza Aoba Aoba-ku, Sendai, 980-8578, Japan 2 Research Institute for Magnetoelectric Materials, 2-1-1, Yagiyama-minami, Sendai, 982-0827, Japan

P-35 “Microstructure characterization of thermal stable nanoprecipitates in a

multicomponent FeCuMnNiAl alloy with ultra-high strength” Yuren Wen1, a, Zhongwu Zhang2, b, Akihiko Hirata1, c, Takeshi Fujita1, d, C.T. Liu2, e and Mingwei Chen1, * 1World Premier International (WPI) Research Center, Advanced Institute for Materials Research (AIMR), Tohoku University, Sendai 980-8577, Japan 2Materials Research & Education Center, Auburn University, 275 Wilmore Labs, Auburn, AL 36849, USA

P-36 “Size Effect of NPG-based electrochemical supercapacitors”

Y. Hou1, a, X. Y. Lang1, 2, b and M. W. Chen1, c, * 1 WPI Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan 2 Key Laboratory of Automobile Materials (Jilin University), Ministry of Education, and School of Materials Science and Engineering, Jilin University, Changchun 130022, China

P-37 “Microwave absorption properties of polymer composites with amorphous

Fe-B/Ni-Zn ferrite nanoparticles” Kazuaki Shimba* Department of Materials Science, Graduate School of Engineering, Tohoku University, 6-6-02 Aoba-yama, Sendai 980-8579, Japan

P-38 “Synthesis and THz analysis of organic conductor Tetrathiafulvalene -

7,7,8,8-tetracyanoquinodimethane ((TTF-TCNQ).” Takahiro Oohashi1,a, Kyosuke Saito1,b, Tadao Tanabe2,c and Yutaka Oyama1,d

1,Department of Materials Science and Engineering, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan 2,Institute of Multidisciplinary Research for Advanced Materials Coordinator, Center for Fusion Research of Nano-Interface Devices, Low-carbon Research Network Tohoku University 2-1-1, Katahira, Aoba-ku, Sendai, 980-8577 Japan

P-39 “Formation mechanism of faceted cellular structures during SiGe unidirectional

growth” Raira Gotoha,*, Kozo Fujiwarab, Xinbo Yangc and Satoshi Udad Institute for Materials Research (IMR), Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai 980-8577, Japan

P-40 “Structural features of Al-based approximants of χ-AlPdRe and R-AlPdCo

and their pseudo Mackay clusters” Shota Suzukia*, Rayko Simurab and Kazumasa Sugiyamac Institute for Materials Research (IMR), Tohoku University, Aoba-ku, Sendai 980-8577, Japan

P-41 “Local and medium range ordering in the binary Zr-Cu amorphous alloys.”

T. Kawamata1, a *, Y. Yokoyama 1, b and K. Sugiyama1, c 1 Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

P-42 “Dynamic interactions between impurities and dislocations in Ge crystals”

Y. Murao1*, T. Taishi2, Y. Ohno1, Y. Tokumoto1, K. Kutsukake1, I. Yonenaga1 1Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan, 2Institute of Carbon Science and Technology, Shinshu University, Nagano 380-8553, Japan

P-43 “Phase equilibria and thermodynamic calculation in Co-Ta binary system “

K. Shinagawa1, T. Omori1, K. Oikawa1, I. Ohnuma1, K. Ishida1, R. Kainuma1 1Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan

P-44 “Effect of Nitridation on Indium-composition of InGaN films”

CHOI JungHun1,2*, Takashi Hanada2, Ryuji Katayama2,

and Takashi Matsuoka2 1Department of Applied Physic, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan 2Institute for Materials Research, Tohoku University, Sendai 980-8579, Japan

P-45 “Terahertz wave generation from Gallium Selenide with 1.2μm Cr:Forsterite laser excitation” Hikari Dezaki1, a, Jin Haiyan1,b and Yutaka Oyama1,c, * 1Department of material science graduate school of engineer Tohoku University Aoba-yama 6-6-11-1021 Sendai, 980-8579 Japan

P-46 “Fabrication of MgO based bottom free magnetic tunnel junctions for magnetic

field sensor application” Kosuke Fujiwara1, a, Mikihiko Oogane1, Saeko Yokota1, Hiroshi Naganuma1 and Yasuo Ando1 1Depertment of Applied Physics, Tohoku University, Sendai, Miyagi 980-8579, Japan

P-47 “Spin-caloritronic Effects in Heusler Compound Co2MnSi Based Structures”

S. Bosua*, Y. Sakurabab, K. Uchidac, K. Saitod, E. Saitohe, K. Takanashif Institute for Materials research, Tohoku University, Sendai 980-8577, Japan

P-48 “Influence of loading rates on amorphization in nanocrystalline Boron

Carbides” K. Madhav Reddy1,a, Y. H. Liu 1,b, T. Fujita1,c, J.J. Guo1,d, J. P. Singh2,e, J.W. McCauley3,f, M.W. Chen1,g* 1WPI Advanced Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan 2U.S. Army International Technology Center, Tokyo 106-0032, Japan 3U.S. Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, USA

P-49 “Study of magnetic exchange-coupling in (111) L10 FePt/ glassy FeNbHfYB

bilayered thin films” Yaocen Wang1,a, Parmanand Sharma2,b,* Akihiro Makino3,c 1 Graduate School, Tohoku University, Sendai 980-8577, Japan 2 Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan 3 Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan

P-50 “Increase of hardness and the precipitation of β′ phase in as-solutionzied

Ag-Pd-Au-Cu alloy system” Yonghwan Kim1,a, Mitsuo Niinomi2,b,*, Junko Hieda2,c, Masaaki Nakai2,d, and Hisao Fukui3,d 1 Graduate Student, Department of Materials Science, Graduate School of Engineering, Tohoku University, 6-6 Aoba, Aramaki Aza, Aoba-ku, Sendai 980-8579, Japan

2Department of Biomaterials Science, Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan 3Department of Dental Materials Science, School of Dentistry, Aichi-Gakuin University, Nagoya 464-0045, Japan

P-51 “Formation Rate of Metal Emulsion on Bottom Bubbling Rate in Al alloy/Salt

System” D.Y. Song1, a, N. Maruoka2,b, H. Shibata2, c and S. Kitamura2, d, *

1 Graduate School of Engineering, Tohoku University, 6-6 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan 2 Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

P-52 “Spin injection in Co2FeAl0.5Si0.5/GaAs junctions”

Tatsuya Saito1, a, *, Nobuki Tezuka2, b and Satoshi Sugimoto3, c 1 Department of Materials Science, Graduate School of Engineering, Tohoku University, Aobayama 6-6-02, Sendai 980-8579, Japan

P-53 “Photoluminescence of Rare Earth-doped TiO2 Nanotubes*”

Dongjin Park, Tohru Sekino, Satoshi Tsukuda and Shun-Ichiro Tanaka IMRAM, Tohoku University, Katahira, Sendai 980-8577, Japan

P-54 “Nano open porous Nb prepared with metallic melt bath”

Joung Wook Kim1, Wada Takeshi2, Hidemi Kato2 1Department of Materials science, Graduate School of Engineering, Tohoku University 2Institute for Materials Research, Tohoku University

P-55 “Dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy”

Julien Favre*, Shingo Kurosu, Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, Damien Fabrègue*, Eric Maire* Institute for Materials Research, Tohoku University – Mateis, INSA Lyon*