Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130
Houston, TX 77043
FAX: (713) 672-7905PHONE: (713) 691-4401
E-MAIL: [email protected]: www.pmi-auction.com
LATE MODEL HIGH SPEED STAMPING FACILITYFeaturing: Presses Up to 300 T. Including (3) Minster Hevistamper 200 T. Cap. Presses, (3) Bliss High Speed Straight Side Presses,
(4) Stamtech 200 T. Cap. High Speed Gap Frame Presses, (2) Stamtech 110 T. Cap. High Speed Gap Frame Presses, Late Model Servo Feed Equipment From Dallas & CWP, Dallas Cradle/Straighteners, OBI Presses, Tool & Die Department, Quality Control Department,
Maintenance Equipment, Material Handling Equipment, Late Model Forklifts, Much Much More!
AUCTION
PMI TN Lic. #2141Bob Braman TN Lic. #2263 • Ron Moore TN Lic. #4831
HOUSTON • DALLAS • ST. LOUIS
Sale Conducted By:
18" DALLAS CABINET STYLE SERVO FEEDER STRAIGHTENER
Read Terms and Conditions on Back Page of Brochure
MOTOMAN PRO-SYSTEM 1000 6-AXIS WELDING ROBOT CELL
CNC
<300 T. CAP. HIGH SPEED CLEARING STRAIGHT SIDE PRESS
>200 T. CAP.
STAMTEC GAP FRAME
PRESSES
1999
4AVAILABLE
REBUILT2005
At the Premises of
BERKLINE CORPORATION5901 Industrial Park Drive
LENOIR CITY, TENNESSEE 37771(See Directions on Back Page)
INSPECTION Wednesday, July 9
9:00 A.M. to 4:00 P.M.
& Morning of Sale
A BUYER’S PREMIUM WILL APPLY: 12% ONSITE,
15% WEBCAST
On-Site Bidding in Lenoir City, Tennessee or Bid Via Webcast
at
THURSDAY, JULY 10 • 10:00 A.M.
1997
2006
200 T. CAP. MINSTER HEVI-STAMPER STRAIGHT SIDE PRESS
200 T. CAP. MINSTER HEVI-STAMPER ROLLING BOLSTER PRESS
2AVAILABLE
HIGH SPEED STRAIGHT SIDE PRESSES
CLEARING 300 T. CAP., Mdl. S2-300-72-36, (rebuilt 2005 by Industrial Machine Repair in Hayden, Indiana), 6" stroke, 24" shut ht. (SDAU), 6" pwr. ram adj. w/indicator, 36" x 72" bed and ram area (F-B, L-R), variable spds.: 40–80 SPM, 20"W. windows, Wintriss “Smart-Pac” II press control sys-tem, Wintriss DSI 2 die sensor system, air clutch brake and counterbalance, Microguard light curtain safety device, hyd. tie rod nuts, micro-level vibration isolation pads, floor stand-ing design, S/N 51-1432.
(2) MINSTER 200 T. CAP. “HEVI-STAMPER,” Mdl. E2-200, 5" or 6" stroke (see below), 26" shut ht. (SDAU), 6" pwr. ram adj. w/indicator, spds.: 0–150 SPM, 30" x 84" bed and ram area (F-B, L-R), 20-3/4"W. windows, quick change die arrangement w/rolling bolster, swing-away bolster stan-chions, and hyd. clamping, Wintriss “Smart-Pac” press con-trol system, Wintriss Die Pro die sensor system, Wintriss load analyzer, air clutch, brake and counterbalance, Protech Eagle Eye light curtain safety devices, micro-level vibration isolation pads, floor standing design, S/N E2-200-25919 (5" stroke), S/N E2-200-25920 (6" stroke).
MINSTER 200 T. CAP. “HEVI-STAMPER,” Mdl. E2-200, 8" stroke, 25" shut ht. (SDAU), 10" pwr. slide adj. w/indicator, variable spds.: 45–90 SPM, 54" x 60" bed and ram area (F-B, L-R), 26-3/4"W. windows, air clutch, brake, and coun-terbalance, Wintriss Die Pro 1500 die protection system, Wintriss DSI 2 die sensor system, Shadow V light curtain safety device, micro-level vibration isolation pads, floor standing design, S/N 20169.
2 3
300 T. CAP. HIGH SPEED CLEARING STRAIGHT SIDE PRESS
REBUILT2005
0–150SPM
BLISS 200 T. CAP., Mdl. HP2-200, 6" stroke, 26-1/2" shut ht. (SDAU), 4" pwr. ram adj. w/indicator, variable spds.: 30–60 SPM, 72" x 36" bed area (F-B, L-R), 72" x 30" ram area (F-B, L-R), 25"W. windows, Wintriss “Smart-Pac” press control system, Wintriss Die Pro die sensor system, air clutch, brake and counterbalance, Eagle Eye light curtain safety device, micro-level vibration isolation pads, floor standing design, S/N H70337.
(2) BLISS 150 T. CAP., Mdl. HP2150, 3" or 4" stroke (see below), 20" shut ht. (SDAU), 5" pwr. ram adj. w/indicator, variable spds.: 0–150 SPM, 36" x 60" bed area (F-B, L-R), 24" x 60" ram area (F-B, L-R), 21"W. windows, air clutch, brake and counterbalance, Cieco programmable cam switch, light curtain safety device, operator’s control pedestal, micro-level vibration isolation pads, floor standing design, S/N H-68645 (5" stroke), S/N H-66881 (3" stroke).
BLISS 100 T. CAP., Mdl. HP2-100- 48-30, 2-1/2" stroke, 17" shut ht. (SDAU), 4" pwr. ram adj. w/indica-tor, variable spds. 0–200 SPM, 30" x 48" bed area (F-B, L-R), air clutch, brake and counterbalance, Cieco programmable cam switch, noise enclosure, micro-level vibration isolation pads, floor standing design, S/N H-66079.
100 T. CAP. BLISS MDL. HP-2 HIGH SPEED PRESS150 T. CAP. BLISS MDL. HP-2 HIGH SPEED PRESS
0–150SPM
200 T. CAP BLISS MDL. HP-2 HIGH SPEED PRESS
0–200
SPM
2 3
150 T. CAP. DANLY OBI PUNCH PRESS
200 T. CAP. STAMTEC GAP FRAME PRESS
GAP FRAME PRESSES (4) STAMTEC 200 T. CAP., new 1997, Mdl. G1-200, 7.88" stroke, 17.73" die height, 4.33" pwr. ram adj. w/indicator, variable spds.: 20–50 SPM, 32-1/2" x 55" (F-B, L-R) bolster area, 25" x 33-1/2" ram area (F-B, L-R), Wintriss “Smart-Pac” press control system, Wintriss DSI II die sensor system, Honeywell programmable cam, hyd. overload protection, Blackmax light curtain safety device, micro-level vibration isolation pads, S/N 0371, S/N 0385, w/free standing control console, S/N S60526 and S/N S60531 w/press mtd. operator’s control panel.
(2) STAMTEC 110 T. CAP., new 1997 and 1995, Mdl. G1-110, 4.33" stroke, 15.13" die height (SDAU), 3.152" pwr. ram adj. w/indicator, variable spds.: 50–100 SPM, 23-1/2" x 45-1/2" bolster area (F-B, L-R), 18-1/2" x 25-1/2" ram area (F-B, L-R), Wintriss “Smart-Pac” control system, Wintriss Mdl. DSI II die sensor system, hyd. overload protection, Shadow V light curtain safety device, micro-level vibration isolation pads, free standing control console, S/N 0396 (10/1995), S/N 0422 (5/1997).
OBI PUNCH PRESSES(2) DANLY 150 T. CAP., Mdl. 150 OBI-G, 6" stroke, 15-1/4" shut ht. (SDAU), 4" pwr. slide adj., 30" x 49-1/2" bolster area (F-B, L-R), 24" x 33-1/2" ram area (F-B, L-R), variable spds.: 35–70 SPM, 20 HP motor, air clutch, brake and counterbalance, Danly 3" stroke 15 T. cap. air cushion, operator’s control pendant, Wintriss clutch/brake control and Shadow V light curtains, S/N 15060240178, S/N 15059900177.
PERKINS 135 T. CAP. BACKGEARED DESIGN,Mdl. 800-B, 5" stroke, 16" shut ht. (SDAU), 4" ram adj., 28" x 41" bolster area (F-B, L-R), Wintriss Automatic Plus control set, Shadow V light curtains, air clutch and counterbalance.
1997
At the Premises of
BERKLINE CORPORATION5901 Industrial
Park DriveLENOIR CITY, TENNESSEE
37771(See Directions on Back Page)
THURSDAY JULY 10
10:00 A.M.
INSPECTIONWednesday, July 9
9:00 A.M. to 4:00 P.M. & Morning of Sale
PROXY BIDS
If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401
for instructions, or go to our website at
www.pmi-auction.com.
110 T. CAP. STAMTEC GAP FRAME PRESS
19972
AVAILABLE
4 5
200 T. CAP. STAMTEC GAP FRAME PRESS
4AVAILABLE
24" SERVO COIL FEED LINE 18" SERVO COIL FEED LINE
AUCTION
12" DALLAS CABINET STYLE SERVO FEEDER/STRAIGHTENER
CNC
SERVO FEEDERSDALLAS MDL. DRFHDS-418 CABINET STYLE, new 2006, 18" cap. x .200" mild steel or 8" cap. x .25" mild steel, 5-roll powered straightener, 4" dbl. roll servo feed w/air pinch and anti-backup, adj. height cabinet base, Uniop programmable feed unit, S/N 22470.
DALLAS MDL. DRSMS-412 CABINET STYLE, new 2006, 12" cap. x .156" mild steel, 5-roll integrated straightener w/air pinch entry rolls and guide rollers, 4" dbl. roll servo feed w/air pinch and anti-backup, Uniop programmable feed unit, adj. height cabinet, S/N 22416.
(2) CWP SERVOMAX III CABINET STYLE, new 2005, Mdl. SMXIII-24H, 24" stock width, .187" max. material thickness, 999.999 max. feed length, right-to-left feed direction, infeed cascade rolls, auto. lubrication, adj. height base, S/N 13512, S/N C13513.
(4) CWP SERVOMAX II CABINET STYLE, Mdl. SMX24H, .187" max. thickness, 24" max. width, 999.999" max. feed length, right-to-left feed direction, infeed cascade rolls, auto. lubrication, adj. height base, S/N S84.01, S/N S84.02, S/N S176-02, S/N S326.
(2) CWP SERVO MAX CABINET STYLE, Mdl. SMX18H, 18" max. width, 999.999" max. feed length, .187" max. ma-terial thickness, left-to-right feed direction, adj. cabinet base, air operated pinch rollers, guide roll set, infeed cas-cade rolls, S/N 1402, S/N SMX18H-14-1.
CWP SERVO MAX II PRESS MOUNTED, Mdl. SMX12, 12" max. width, 999.999" max. feed length, .156" max. ma-terial width, left-to-right feed direction, S/N 13925.
CABINET STYLE AIR FEEDERSDALLAS MDL. D500 CABINET STYLE, .281" x 24" width x 12" max. stroke, adj. height cabinet base, air surge tank, pwrd. 5-roll straightener, S/N 15516.
DALLAS MDL. D400-18-12RH, .200" x 18" width x 12" max. stroke, 5-roll powered straightener, adj. height base, S/N 19408.
DALLAS MDL. D32512X6PF, .170" x 12" max. material width, 6" max. feed stroke, adj. height cabinet base, 5-roll pull through straightener, S/N 18652.
24" CWP SERVOMAX II CABINET STYLE SERVO FEEDER
4AVAILABLE
18" DALLAS CABINET STYLE SERVO FEEDER STRAIGHTENER
2006
CWP 24" SERVOMAX III CABINET STYLE SERVO FEEDER
2006
4 5
2005
6 7
LITTELL 10,000 LB. X 24" COIL REEL W/ELEVATING COIL STAND
DALLAS 6,000 LB. X 18" COIL CRADLE W/LOOP DEFLECTOR
COIL CRADLES(3) DALLAS MDL. DCC-10000X18, 10,000 lb. x 18" wide, 60" max. O.D., spds.: 20–60 FPM, Dallas Mdl. PR4.5X18 pinch roll, .312" x 18" width cap., Dallas Mdl. DD18/FOC18 en-closed loop deflector w/air operated guide chute, S/N 19422, S/N 19418, S/N 19414.
(2) PRESSROOM EQUIPMENT 10,000 LB. x 18" CAP., Mdl. P100-CC-18, 18" max. material width, power pinch rollers, enclosed loop deflector, S/N N.A.
(3) DALLAS MDL. DCC-6000-18, 18" max. material width, 6,000 lb. max. coil weight, 60" max. coil O.D., Dallas pinch roll, .250" x 18" max. width, Dallas Mdl. DD18-72 deflector, S/N 18901, S/N 18898, S/N 18899.
(4) DALLAS 6,000 LB. x 12" CAP., Mdl. DCC-6000-12, 12" max. width, 60" max. O.D., 250" x 12"W. pwr. pinch roll, Mdl. DD12-72 enclosed loop deflector, air operated guide chute, S/N 19244, S/N 19410, S/N 19485, N/A.
ROWE 6,000 LB. CAP., approx. 24" max. width, S/N N.A.
POWERED COIL REEL & STRAIGHTENER
LITTELL 10,000 LB. CAP., Mdl. S100-24, travel-ing reel design w/elevating coil stand, 24" max. material width, pwrd. expansion, hyd. hold-down roll, 24" Sesco inclined 7-roll straightener, entry guide rollers, entry and exit air operated pinch rolls, auto. lubrication system, enclosed loop deflector, S/N 58310-55-6.
POWERED STRAIGHTENERS(4) CWP MDL. SE24C INCLINED, new 1997, 7-roll design, 24" max. width, .021" to .0187" max. material thickness, right-to-left feed direction, 100 FPM max. spd., loop controls, guide rollers, air operated entry pinch rolls, S/N C29802, S/N C29801, S/N C7069-1, S/N C7069-2.
DALLAS MDL. 81913 INCLINED, 7-roll design, 12" max. width, .30" to .125" max. material thickness, infeed and outfeed pinch rollers, loop controls, S/N 15596.
PERFECTO MDL. 28-24-7 INCLINED, 7-roll design, 24" max. stock width, .187" to .025" stock thickness, 1,200 IPM max. spd., entry and exit pinch rolls.
AMERICAN STEEL LINE MDL. 411, 7-roll design, 12" max. width, air operated pinch roll, S/N 7519.
TILT-UP THREADING TABLES(5) COOPER WEYMOUTH PETERSON MDL. 24PTT11, 24" max. material width, air operated, S/N C2978-1, S/N C2978-2, S/N C7068-1, S/N 7068-2.
3AVAILABLE
DALLAS 10,000 LB. X 18" COIL CRADLE W/LOOP DEFLECTOR
3AVAILABLE
DALLAS 6,000 LB. X 12" COIL CRADLE W/LOOP DEFLECTOR
UNABLE TO ATTEND?Bid on-line in real time at
TO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. DO
IT NOW.2. Either wire transfer, or mail a
cashier’s check deposit in the amount of $3,000 to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100.If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401.
You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT. If you need assistance or for wire transfer instructions, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO
A 15% BUYER’S PREMIUM.
4AVAILABLE
6 7
SHARP 15" X 50" GAP BED ENGINE LATHE 15" X 40" CLAUSING ENGINE LATHE BRIDGEPORT VERTICAL TURRET MILL
ENGINE LATHESSHARP 15" X 60", Mdl. 1560S, 9" sw. over crosslide, removable gap bed, spds.: 70–1,800 RPM, Inch/Metric thdng., 2-axis D.R.O., taper attach., steadyrest, followrest, 3-jaw and 4-jaw chucks, faceplates, collet closer attachment, S/N N.A.
CLAUSING 15" X 48", Mdl. 1501, variable spds.: 45–2,000 RPM, camlock spndl., 9" sw. over crosslide, steadyrest, collet nose attach., 3-jaw and 4-jaw chucks, S/N 150411.
VERTICAL TURRET MILLING MACHINESSHARP, new 1999, 10-1/2" x 51-1/8" table, longitudinal pwr. feed, Acu-Rite D.R.O., variable spds.: 60–4,500 RPM, 3 HP drive motor, S/N 51200863.
BRIDGEPORT SERIES I, new 1990’s, 9" x 42" table, Bridge-port 2-axis D.R.O., variable spds.: 60–4,200 RPM, 2 HP motor, S/N 363840781W.
BRIDGEPORT MDL. 2J, 9" x 42" table, Newall 2-axis D.R.O., variable spds.: 60–4,200 RPM, 1-1/2 HP drive motor, chrome ways, S/N 110209.
SURFACE GRINDERS(2) ACER 16" X 32" AUTOMATIC HYDRAULIC, Mdl. AGS-1632AHD, 2" x 14" wheel size, incremental downfeed, separated hyd. system, electromagnetic chuck and controls, magnetic filtra-tion coolant system w/paper filter, hyd. over-the-wheel dresser, S/N 97010066 (1997), S/N 96030202 (1996).
DoALL 8" X 24" AUTOMATIC HYDRAULIC, Mdl. D824-12, 3 HP drive motor, belt drive spndl., 8" x 18' fine line electromagnetic chuck w/controller, over-the-wheel hyd. dresser, incremental downfeed system, S/N 222-70298.
CHEVALIER ACCUGRIND 6" X 18" HAND FEED, new 2002, Mdl. 618SP, 6" x 18" fine line electromagnetic chuck w/controller, ultra fine downfeed system, heavy cast iron base, S/N A489A005.
REID ROLLERWAY 6" X 18" HAND FEED, Mdl. HR, 6" x 12" fine line electromagnetic chuck and controls, ball roller table, 1 HP di-rect drive spndl., S/N 21351.
HARIG 6" X 18" HAND FEED, Mdl. Super 618, Walker Mdl. 618 fine line electromagnetic chuck, fabricated steel base, 1 HP direct drive spndl., S/N 1896-18.
SHARP VERTICAL TURRET MILL ACER 16" X 32" AUTO. HYD. SURFACE GRINDER CHEVALIER ACCUGRIND 6" X 18" SURFACE GRINDER
19972002
1999 2AVAILABLE
AUCTIONTHURSDAY, JULY 10 • 10:00 A.M.
At the Premises of
BERKLINE CORPORATION5901 Industrial Park Drive
LENOIR CITY, TENNESSEE 37771
On-Site Bidding in Lenoir City, Tennessee or
Bid Via Webcast at
CARLTON 4' x 11" RADIAL ARM DRILL 24" GROB VERTICAL BANDSAW
MILLER WELDING MACHINE
REID HAND FEED SURFACE GRINDER
ASSORTED SUPPORT MACHINERY
DRILLSCARLTON 4' X 11" RADIAL ARM,#4 MT spndl., spds.: 60–1,500 RPM, tap leads, pwr. elevation, 5 HP drive motor, tilting box table, S/N 1A-3446.
FOSDICK 21" SENSITIVE, 24" sq. oil groove production table, sliding head, 1 HP drive motor, spds.: 110–1,800 RPM.
BUFFALO MDL. 22 SENSITIVE,T-slotted oil groove table.
CLAUSING MDL. 2276 PEDESTAL,15-1/2" x 18" elevating table, S/N 517194.
MISCELLANEOUS MACHINERY & EQUIPMENTGROB 24" VERTICAL BANDSAW, Mdl. 4V24, 28" x 24" tilting table, scroll cutting attachment, blade welder and grinder, S/N 525; DoALL 16" VERTICAL BANDSAW, Mdl. 1612-0, 24" x 24" tilting table w/scroll cutting attachment, S/N 209-64485; VULCAN MDL. A1750 ELECTRIC HEAT TREAT OVEN, 1,100 deg. F. max. temp., controls and stand; ARCAN 40 T. CAP. H-FRAME SHOP PRESS, Mdl. CP400, Enerpac hand pump, S/N 13135; AERO 2-SPINDLE HORIZONTAL DRILL, air operated, horiz. drilling heads w/auto. feed, dual palm button controls; RIDGID MDL. 535 PIPE THREADER, roller base, foot pedal control and multiple self-opening die heads; ROCKWELL MDL. 10 CONTRACTOR’S SAW w/fabricated steel base; BLACK DIAMOND SERIES BW DRILL GRINDER w/collets and accessories, cabinet base; DELTA ROCKWELL COMBINATION DISC AND BELT SANDER, 6" disc, 12" belt sander, on fabricated base; DoALL 6" VERTICAL/HORIZONTAL BELT SANDER, Mdl. 430, on fabricated steel stand, S/N 27789; DAYTON 1 HP DOUBLE END PEDESTAL GRINDER on cast iron stand; STANLEY 1 HP DOUBLE END PEDESTAL GRINDER on fabricated stand w/lighted shields; DAYTON 9" X 16" HORIZONTAL BANDSAW on fabricated base.
8 9
PARTIAL VIEW OF PRECISION INSTRUMENTS
RIVETERS(3) VSI MDL. TM10 ORBITAL, 1 HP motor, fixture base, foot pedal control, fabricated steel stand, S/N 01257R1, S/N 26566, S/N 19222.
(2) STAFAST MDL. HFM-BM14S, vibratory bowl feeder, dual palm button safety device, on fabricated steel stand, S/N 031409, S/N 031410.
6-AXIS WELDING ROBOTMOTOMAN PRO-SYSTEM 1000 SERIES, new 1999, Motoman Mdl. UP6 - 6-axis robot, Yasnac XRC Mdl. ERCR-UP6-LB00 robot control system, MotoArc 350I MIG welding power supply, 350 amp @ 34 v. rated out-put, 100% duty cycle, wire spooler unit, MIG welding gun, 180 deg. power swivel turntable w/fixture mounts, full enclosure w/fume exhaust hood, light curtain safety devices, safety gates, S/N S9M114-1-5-8.
WELDING EQUIPMENT & ACCESSORIES
MILLER MDL. DIALARC HF DC ARC WELDER, 250 amp @ 30 v. rated output, 40% duty cycle, welding leads, assorted accessories, S/N JJ374897.
OXYGEN/ACETYLENE TORCH UNIT w/gauges and heating torch and bottle rack; ASSORTED WELDING SCREENS INCLUDING HEAVY FABRICATED WELDING ENCLOSURE.
COORDINATE MEASURING MACHINEHELMEL MDL. 338-251 CHECKMASTER, 36" X-axis travel, 48" Y-axis travel, 24" Z-axis measuring range, personal computer system w/Helmel Geomet measuring software, Renishaw Mdl. ES probe system, S/N 88-11.
OPTICAL COMPARATORSUBURBAN TOOL MASTERVIEW MDL. MV14, 14" dia. screen, horiz. beam, 4-1/2" x 19-1/2" stage, profile and surface illumination, 10X lens, Vernier 2-axis D.R.O., on fabricated steel stand, S/N 273.
PRECISION INSTRUMENTSMICROFLAT 48" X 48" 4-LEDGE GRANITE SURFACE PLATE, Grade B, w/fabricated steel stand; ROCK OF AGES 36" X 48" 2-LEDGE GRANITE SURFACE PLATE w/fabricated steel stand; DoALL 36" X 60" X 8" THK. 2-LEDGE GRANITE SURFACE PLATE, Grade A, resurfaced by Precision Granite, on fabricated steel stand; DoALL 24" X 36" GRANITE SURFACE PLATE, Grade B, on fabricated stand, MITUTOYO 18" X 18" GRANITE SURFACE PLATE, Grade B, on fabricated stand; WILSON MDL. 3TT-RB ROCKWELL HARDNESS TESTER, S/N 2428; LARGE QUANTITY OF PLUG GAUGES INCLUDING GO/NO-GO PLUG GAUGES; MULTIPLE SETS OF PIN GAUGES up to 1/2"; BAUSCH & LOMB STEREOSCOPE; MITUTOYO 1" TO 12" MICROMETER SET; DIAL TEST INDICATORS; DIAL AND VERNIER CALIPERS up to 24"; GAUGE BLOCK SETS; MAGNETIC VISES; MITUTOYO 24" DIAL HEIGHT GAUGE; MITUTOYO 12" DIAL HEIGHT GAUGE; MITUTOYO 0" TO 2" DIGITAL HEIGHT GAUGE; MITUTOYO 0" TO 12" DIGITAL HEIGHT GAUGE; MITUTOYO 0" TO 18" DIGITAL HEIGHT GAUGE; CANTILEVER MATERIAL STORAGE RACKS.
MOTOMAN PRO-SYSTEM 1000 6-AXIS WELDING ROBOT CELL
CNC
1999
STAFAST RIVETING MACHINE
SUBURBAN TOOL OPTICAL COMPARATOR
HELMEL “CHEKMASTER” MANUAL CMM
VSI ORBITAL RIVETING MACHINES
3AVAILABLE
36" X 48"
X 24"
2AVAILABLE
8 9
CATERPILLAR 8,000 LB. LPG FORKLIFT
PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.
FORKLIFTSCATERPILLAR 8,000 LB. CAP., new 2001, Mdl. GC40K, LPG engine, 95" 3-stage mast, 216" lift ht., cushion tires, side shifter, 42" forks, S/N AT87C01884.
HYSTER 8,000 LB. CAP., new 2003, Mdl. S80XM, LPG engine, 95" standard mast, 145" lift ht., cushion tires, side shifter, 42" forks, S/N E004V02990A.
HYSTER 8,000 LB. CAP., new 2001, Mdl. S80XL2BCS, LPG engine, 83" standard mast, 122" lift ht., cushion tires, side shift-er, 42" forks, S/N D004D11064Y.
CATERPILLAR MDL. GC40K-STR, new 1999, LP engine, 8,000 lb. @ 24" load center, 183" max. lift, cushion tires, 48"L. forks, side shifter, load grate, dock lights, S/N AT8701266.
CLARK MDL. C500YS, LP engine, 8,000 lb. @ 24" load center, 123" max. lift, large dia. front cushion tires, 48"L. forks, S/N Y685814132.
HYSTER 6,000 LB. CAP., new 1998, Mdl. S60XM, LPG engine, 90" 3-stage mast, 211" lift ht., cushion tires, side shifter, 42" forks, S/N D187V10172V.
TOYOTA 6,000 LB. CAP., new 2001, Mdl. 7FGCU30, LPG engine, 95" 3-stage mast, 218" lift ht., cushion tires, side shifter, 42" forks, S/N 60946.
HYSTER 8,000 LB. CAP. FORKLIFT
2003
HYSTER 8,000 LB. CAP. FORKLIFT
CATERPILLAR 8,000 LB. CAP. FORKLIFT
2001
TOYOTA 6,000 LB. CAP. FORKLIFT
2001
1999
10 11
2001
PLANT & MACHINERY INC. APPRAISAL DIVISION
Confidential Industrial Machinery & Equipment Appraisals Call 1-800-282-8466
CUB CADET TRACTOR
CORRUGATED STEEL TUBS
HYSTER 5,000 LB. CAP., new 2003, Mdl. S50XM, LPG engine, 83" 3-stage mast, 189" lift ht., cushion tires, side shifter, 42" forks, S/N D187VA28344A.
NISSAN 5,000 LB. CAP., new 1990, Mdl. KCPH02A25V, LPG engine, 83" 3-stage mast, 189" lift ht., cushion tires, 42" forks, S/N 908879.
(2) NISSAN MDL. CUGJ02F35PV, LP engine, 4,950 lb. @ 24" load center, 219" max. lift, cushion tires, 42"L. forks, side shifter, load grate, dock lights, additional counter weighing added, S/N CUGJ02-9R0919, S/N N.A.
(2) YALE 4,000 LB. CAP., new 2000, Mdl. GLC040AFNUAV058, LPG engine, 58" standard mast, 83" lift ht., cushion tires, side shifter, 42" forks, S/N A809N09392X, S/N A809N09771X.
ELECTRIC FORKLIFTPRIME MOVER 2,000 LB. CAP. ELECTRIC COUNTERBALANCE WALKIE STACKER, Mdl. SC20, 130" max. lift ht., battery charger, S/N SC20026241001.
LAWN TRACTORCUB CADET MDL. LT1024, hydrostatic drive, 50"W. dbl. blade deck.
MACHINE SHOP ACCESSORIES(200) 42"L. X 30"W. X 24" STACKABLE CORRUGATED STEEL BINS,most are dropped front and some are solid front; (6) 11-DRAWER TALL ROLLER DRAWER STORAGE CABINETS; COUNTERBALANCE PARTS CARRIER w/rotating top; (3) ELEVATING DIE TABLES w/sgl. point screw elevation; (12) 24" and 30" PEDESTAL FLOOR FANS; (4) HEAVY DUTY MILLING VISES BY DoALL, BRIDGEPORT and PALMGREN; QUICK RELEASE DRILL PRESS VISES; PALMGREN TILTING VISE; HEAVY DUTY FORGE C-CLAMPS; BRIDGEPORT 15" ROTARY TABLE; 9-1/2" PHASE II ROTARY TABLE; DEMAGNETIZER UNIT; LETTER/NUMBER STAMPS; COUNTERBORER SET; BLADE REAMERS; PIPE AND STRAIGHT FLUTE TAPS; LAPPING TOOLS; BORING TOOLS; ADJUSTABLE BORING CUTTERS; TAPER SHANK DRILLS; CHUCKING REAMERS; HEAVY DUTY FORGED EYE BOLTS; DIE STYLE EYE BOLTS; HEAVY DUTY CHAIN; 4-LEG CHAINS in various sizes; COIL LIFTER; ADJUSTABLE PALLET RACKING; WELDED STEEL SAWHORSES; HEAVY DUTY SHELVING; HEAVY DUTY DIE WORKBENCHES; STEEL WORKTABLES; FORKLIFT CAGE; ROLLING LADDERS; STEP LADDERS; COFFING 2 T. CAP. CHAIN HOISTS.
ROLLER DRAWER TOOL CABINETS
NISSAN 4,950 LB. LPG FORKLIFTS
200
AVAILABLE
NISSAN 5,000 LB. CAP. FORKLIFT
10 11
IP-8213582
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 305
LATE MODEL HIGH SPEED STAMPING FACILITY
Featuring: Presses Up to 300 T. Including (3) Minster Hevistamper 200 T. Cap. Presses,
(3) Bliss High Speed Straight Side Presses, (4) Stamtech 200 T. Cap. High Speed Gap Frame
Presses, (2) Stamtech 110 T. Cap. High Speed Gap Frame Presses, Late Model Servo Feed Equipment From Dallas & CWP, Dallas Cradle/Straighteners,
OBI Presses, Tool & Die Department, Quality Control Department, Maintenance Equipment,
Material Handling Equipment, Late Model Forklifts, Much Much More!
PUBLIC INVITEDTHURSDAY, JULY 10 • 10:00 A.M.
ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER
LENOIR CITY TENNESSEE
AUCTION
P.O. Box 19100Houston, TX 77224-9100
DATED MATERIAL – PLEASE DELIVER
A 12% Buyer’s Premium Will Apply On-Site.
A 15% Buyer’s Premium Will Apply to Webcast Bids. See above rules for participation.
Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.
ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.
Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $ . This letter is good until August 11, 2008.
In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.
Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.
The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.
Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTION-EER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.
The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless form any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate.
Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.
These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.
TERMS & CONDITIONS
UNABLE TO ATTEND?Bid on-line in real time at
TO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. DO IT NOW.2. Either wire transfer, or mail a cashier’s check deposit in
the amount of $3,000 to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX 77224-9100.If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) 691-4401.
You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT. If you need assistance or for wire transfer instructions, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM.
DIRECTIONSFROM NASHVILLE INTERNATIONAL AIRPORT: Exit airport via Donelson Pike North. Merge onto I-40 East towards Knoxville and proceed approximately 148 miles. Exit 364 toward Lenoir City and merge onto US-321 S/TN-73E/TN-95 S. Proceed approxi-mately 7-1/2 miles. Turn right onto East Broadway Street/US-11/Lee Highway/TN-2 and proceed approximately 1.7 miles. Turn left onto Industrial Park Drive and proceed approximately .3 mile. Auction site will be on your left. Watch for auction signs.
PLANT & MACHINERY INC. APPRAISAL DIVISION
Confidential Industrial Machinery & Equipment Appraisals
Call 1-800-282-8466
ARE YOU SELLING YOUR PLANT?
CALL 1-800-282-8466 FOR A CONFIDENTIAL
CONSULTATIONLODGINGDays Inn ....................................................... (865) 986-2011 1110 Highway 321 North, Lenoir City, TennesseeHoliday Inn Express ..................................... (877) 410-6681 1112 Highway 321 North, Lenoir City, TennesseeHampton Inn ................................................ (865) 988-2000 585 Fort Loudon Medical Center, Lenoir City, Tennessee
PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.