Download pdf - Conus KISS Procedure

KISS Conus Abutment System

Healing abutment in place

Choose matchingabutment

The presentation that follows lists only one combination of parts. Obviously the clinical situation may call for substitution of another part on this slide.


Prosthetic instruments needed



Remove healing abutmentfrom implantAssemble screw driver with

Thumb Knob

Insert the Kiss abutment into the implant ensuring the appropriate orientation


Use only light finger pressure to torque screw


Remove the screwdriver thumb wheel assembly


Insert driver into the abutment screw and turn torque ratchet until torque of 30 Ncm is reached and the head of the ratchet releases

Insert the hex driver within the 30Ncm torque ratchet


Lobes within the impression transfer matches grooves on the abutment

Plastic snap impression transfer has three ribs that match the lobes inside the impression


Line up the lobes of the snap impression coping with the grooves of the KISS Abutment

Seat snap impression coping on the solid abutment

The outside should snap on the bevel of the implant.


Inject impression material around the impression transfer

Insert tray with impression material


Seat impression to capture dental arch


Remove the impression from the mouth when material has set

Impression snap is captured and picked up within the impression


Use a crown form to reline over the sleeve to create a well fitting temporarySeat the temporary resin

sleeve over the abutment

KISS Conus Abutment SystemLaboratory abutment analog is inserted into the impression coping. Make sure to match the grooves on the abutment analog to the lobes of the impression snap


Apply soft tissue replica material around abutment level analog Pour dental stone into impression


Dental stone model with analog in place after separation of impression from dried stone


Apply engaging waxing sleeve for a single crown, non-engaging waxing sleeve for a splinted multi-unit restoration.

Engaging waxing sleeve has Double lobes to match the grooves on the abutment analog


Apply wax over the waxing sleeve and complete the undercasting

Cast wax up with the usual procedures and try in the casting on the stone model

Stack and fire the ceramic in the usual manner

Ceramic crown on model



Cement restoration on abutment