Click here to load reader

Conus Overdenture Chairside Teshnique

  • View
    225

  • Download
    1

Embed Size (px)

DESCRIPTION

Conus Overdenture Chairside Teshnique

Text of Conus Overdenture Chairside Teshnique

  • Overdenture Chairside Technique

  • Assemble screw driver with Thumb Knob

    Remove healing abutmentfrom implant

    Overdenture Chairside Technique

  • Insert the abutment into the Conus 12 Implant and rotate clockwise until snug

    Remove the screwdriver assembly

    Overdenture Chairside Technique

  • Insert the Hex Driver within the 30Ncm torque ratchet

    Insert driver into abutment and turn torque ratchet clockwise until torque of 30 Ncm is reached and the head of the ratchet releases

    Abutments in place

    Overdenture Chairside Technique

  • Snap black processing insert into metal housing

    Place black processing insert on the insertion tool

    Overdenture Chairside Technique

  • Overdenture Chairside Technique

    Put silicon blockout ring on the abutment

  • Overdenture Chairside Technique

    Snap metal housing with processing insert on top of the blockout ring on the abutment

  • Overdenture Chairside Technique

    Remove enough material form the tissue side of the denture to ensure that it does not interfere with the housings.Typically it is necessary to make the cavity in the denture 2-3mm wider and 1-2mm taller than the housing

    Insert denture and ensure that when it is fully seated it does not touch the housings

  • Overdenture Chairside Technique

    Insert resin of choice into the cavities in the denture Insert denture again over

    the housings and with the patient occluding on the denture

  • Overdenture Chairside Technique

    Let resin cure with denture in appropriate occlustion

    Remove denture from mouth and fill any voids with resin.Trim any excess resin around the housing and on the ridge area

    Void

    Excess resin

  • Place the insert with the desired retention into the housing

    Remove the black processing insert with the sharp point of the removal instrument

    Overdenture Chairside Technique

  • Finished prosthesis with housings and inserts in place

    Overdenture Chairside Technique

    Slide Number 1Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12