238201002001200
12/24/03
2-3/8” 6.65 lb/ft E-75 w/ 2-3/8” Wilson Flush Joint 2-1/2” OD x 1-1/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-3/8” WFJ
Interchangeable With Upset Type
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 6.70 lbs
TOOL JOINT DATA
Outside Diameter 2-1/2” Inside Diameter 1-1/16”
API Drift 15/16” Rabbit OD, Suggested 7/8”
Minimum Make-up Torque 2,200 ft-lbs Maximum Recommend Make-up Torque 2,300 ft-lbs
Torsional Yield Strength 4,400 ft-lbs Tensile Strength
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 138,200 lbs 107,600 lbs
Slip Crushing / Slip Type (SDML) 122,400 lbs 95,900 lbs Burst Pressure 15,500 psi 14,800 psi
Collapse Pressure 15,600 psi 13,400 psi Torsional Yield Strength 6,300 ft-lbs 4,800 ft-lbs
Capacity W/ Tool Joint 0.134 US gal/ft Displacement W/ Tool Joint 0.108 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
238201001001200
1/20/04
2-3/8” 6.65 lb/ft E-75 w/ 2-3/8” Homco Flush Joint 2-1/2” OD x 1” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-3/8” Homco FJ
Interchangeable With Upset Type
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 6.70 lbs
TOOL JOINT DATA
Outside Diameter 2-1/2” Inside Diameter 1”
API Drift 7/8” Rabbit OD, Suggested 13/16”
Minimum Make-up Torque 2,100 ft-lbs Maximum Recommend Make-up Torque 2,300 ft-lbs
Torsional Yield Strength 3,400 ft-lbs Tensile Strength
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 138,200 lbs 107,600 lbs
Slip Crushing / Slip Type (SDML) 122,400 lbs 95,900 lbs Burst Pressure 15,500 psi 14,800 psi
Collapse Pressure 15,600 psi 13,400 psi Torsional Yield Strength 6,300 ft-lbs 4,800 ft-lbs
Capacity W/ Tool Joint 0.134 US gal/ft Displacement W/ Tool Joint 0.0957 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
238201078001200
12/24/03
2-3/8” 6.65 lb/ft E-75 w/ 2-3/8” PAC 2-7/8” OD x 1-3/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-3/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 7.06 lbs
TOOL JOINT DATA
Outside Diameter 2-7/8” Inside Diameter 1-3/8”
API Drift 1-1/4” Rabbit OD, Suggested 1-3/16”
Minimum Make-up Torque 2,900 ft-lbs Maximum Recommend Make-up Torque 3,200 ft-lbs
Torsional Yield Strength 4,700 ft-lbs Tensile Strength 238,500 lbs
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 138,200 lbs 107,600 lbs
Slip Crushing / Slip Type (SDML) 122,400 lbs 95,900 lbs Burst Pressure 15,500 psi 14,800 psi
Collapse Pressure 15,600 psi 13,400 psi Torsional Yield Strength 6,300 ft-lbs 4,800 ft-lbs
Capacity W/ Tool Joint 0.131 US gal/ft Displacement W/ Tool Joint 0.108 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
238201083001200
12/24/03
2-3/8” 6.65 lb/ft E-75 w/ 2-3/8” SL H90 3-1/8” OD x 1-13/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-3/8 SL H90
Interchangeable With Upset Type EU
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 6.99 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-13/16”
API Drift 1-11/16” Rabbit OD, Suggested 1-5/8”
Minimum Make-up Torque 2,800 ft-lbs Maximum Recommend Make-up Torque 3,400 ft-lbs
Torsional Yield Strength 5,700 ft-lbs Tensile Strength 270,200 lbs
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 138,200 lbs 107,600 lbs
Slip Crushing / Slip Type (SDML) 122,400 lbs 95,900 lbs Burst Pressure 15,500 psi 14,800 psi
Collapse Pressure 15,600 psi 13,400 psi Torsional Yield Strength 6,300 ft-lbs 4,800 ft-lbs
Capacity W/ Tool Joint 0.134 US gal/ft 0.134 US gal/ft Displacement W/ Tool Joint 0.107 US gal/ft 0.101 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
238201026031200
12/24/03
2-3/8” 6.65 lb/ft E-75 w/ NC 26 3-3/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 26
Interchangeable With 2-3/8” IF Upset Type EU
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 7.19 lbs
TOOL JOINT DATA
Outside Diameter 3-3/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,100 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 6,900 ft-lbs Tensile Strength 313,700 lbs
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 138,200 lbs 107,600 lbs
Slip Crushing / Slip Type (SDML) 122,400 lbs 95,900 lbs Burst Pressure 15,500 psi 14,800 psi
Collapse Pressure 15,600 psi 13,400 psi Torsional Yield Strength 6,300 ft-lbs 4,800 ft-lbs
Capacity W/ Tool Joint 0.134 US gal/ft 0.134 US gal/ft Displacement W/ Tool Joint 0.110 US gal/ft 0.104 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
238204026031200
12/24/03
2-3/8” 6.65 lb/ft S-135 w/ NC 26 3-3/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 26
Interchangeable With 2-3/8” IF Upset Type EU
Nominal Weight per Foot 6.65 lbs Adjusted Weight With Tool Joint per Foot 7.42 lbs
TOOL JOINT DATA
Outside Diameter 3-3/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,100 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 6,900 ft-lbs Tensile Strength 313,700 lbs
TUBE DATA
New Premium Outside Diameter 2-3/8” 2.263”
Inside Diameter 1.815” 1.815” Wall Thickness 0.280” 0.224”
Cross Sectional Area 1.843 sq in 1.435 sq in Maximum Hook Load/Tensile Strength 248,800 lbs 193,700 lbs
Slip Crushing / Slip Type (SDML) 220,300 lbs 172,600 lbs Burst Pressure 27,800 psi 26,700 psi
Collapse Pressure 28,100 psi 24,100 psi Torsional Yield Strength 11,200 ft-lbs 8,700 psi
Capacity W/ Tool Joint 0.134 US gal/ft 0.134 US gal/ft Displacement W/ Tool Joint 0.114 US gal/ft 0.104 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204184022210
4/11/05
2-7/8” 10.40 lb/ft Internal Coating S-135 w / 2-7/8” HT PAC 3-1/4” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-7/8” HT PAC
Interchangeable With N/A Upset Type IU
Internal Coating TK34XT Nominal Weight per Foot 10.40 lbs
Adjusted Weight With Tool Joint per Foot 10.70 lbs
TOOL JOINT DATA Outside Diameter 3-1/4”
Inside Diameter 1-1/2” API Drift 1-3/8”
Rabbit OD, Suggested 1-5/16” Minimum Make-up Torque 5,200 ft-lbs
Maximum Recommend Make-up Torque 5,700 ft-lbs Torsional Yield Strength 8,600 ft-lbs
Tensile Strength 273,000 lbs
TUBE DATA New Premium
Outside Diameter 2-7/8” 2.730” Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.182 US gal/ft 0.182 US gal/ft Displacement W/ Tool Joint 0.164 US gal/ft 0.156 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204079011200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ 2-7/8” PAC 3-1/8” OD x 1-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-7/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.62 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/4”
API Drift 1-1/8” Rabbit OD, Suggested 1-1/16”
Minimum Make-up Torque 4,100 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 6,800 ft-lbs Tensile Strength 337,800 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.182 US gal/ft 0.182 US gal/ft Displacement W/ Tool Joint 0.162 US gal/ft 0.157 US gal/ft
Tool joint is weaker in tension than tube.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278201079042200
12/29/03
2-7/8” 10.40 lb/ft E-75 w/ 2-7/8” PAC 3-1/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-7/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.60 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-5/16”
Minimum Make-up Torque 3,400 ft-lbs Maximum Recommend Make-up Torque 3,800 ft-lbs
Torsional Yield Strength 5,700 ft-lbs Tensile Strength 273,000 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 214,300 lbs 166,500 lbs
Slip Crushing / Slip Type (SDML) 184,800 lbs 144,700 lbs Burst Pressure 16,500 psi 15,900 psi
Collapse Pressure 16,500 psi 14,200 psi Torsional Yield Strength 11,600 psi 8,900 psi
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.155 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278202079011200
3/1/04
2-7/8” 10.40 lb/ft X-95 w/ 2-7/8” PAC 3-1/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 2-7/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.51 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-5/16”
Minimum Make-up Torque 3,400 ft-lbs Maximum Recommend Make-up Torque 3,800 ft-lbs
Torsional Yield Strength 5,700 ft-lbs Tensile Strength 273,000 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 271,500 lbs 210,900 lbs
Slip Crushing / Slip Type (SDML) 234,000 lbs 183,300 lbs Burst Pressure 20,900 psi 20,200 psi
Collapse Pressure 20,900 psi 18,000 psi Torsional Yield Strength 14,600 ft-lbs 11,200 ft-lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.156 US gal/ft
Tool joint is weaker than tube in tension.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278203079013200
1/20/04
2-7/8” 10.40 lb/ft G-105 w/ 2-7/8” PAC 3-1/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection 2-7/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.46 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-5/16”
Minimum Make-up Torque 3,400 ft-lbs Maximum Recommend Make-up Torque 3,800 ft-lbs
Torsional Yield Strength 5,700 ft-lbs Tensile Strength 273,000 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 300,100 lbs 233,100 lbs
Slip Crushing / Slip Type (SDML) 258,700 lbs 202,600 lbs Burst Pressure 23,100 psi 19,900 psi
Collapse Pressure 23,100 psi 12,400 psi Torsional Yield Strength 16,200 ft-lbs 12,400 ft-lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.155 US gal/ft
Tool joint is weaker than tube in tension.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204079013200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ 2-7/8” PAC 3-1/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-7/8” PAC
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.46 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-3/8”
Minimum Make-up Torque 1-5/16” Maximum Recommend Make-up Torque 3,400 ft-lbs
Torsional Yield Strength 3,800 ft-lbs Tensile Strength 273,000 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 25,600 ft-lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.155 US gal/ft
Tool joint is weaker in tension than tube.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278201003066200
1/20/04
2-7/8” 10.40 lb/ft E-75 w/ 2-7/8” RFO 3-7/8” OD x 2-5/32 ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 2-7/8” RFO
Interchangeable With 2-7/8” OH Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.06 lbs
TOOL JOINT DATA
Outside Diameter 3-7/8” Inside Diameter 2-5/32”
API Drift 1.963” Rabbit OD, Suggested 1-7/8”
Minimum Make-up Torque 5,300 ft-lbs Maximum Recommend Make-up Torque 5,800 ft-lbs
Torsional Yield Strength 8,800 ft-lbs Tensile Strength 347,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 214,300 lbs 166,500 lbs
Slip Crushing / Slip Type (SDML) 184,800 lbs 144,700 lbs Burst Pressure 16,500 psi 15,900 psi
Collapse Pressure 16,500 psi 14,200 psi Torsional Yield Strength 11,600 ft-lbs 8,900 ft-lbs
Capacity W/ Tool Joint 0.189 US gal/ft 0.189 US gal/ft Displacement W/ Tool Joint 0.166 US gal/ft 0.157 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278202003066200
1/20/04
2-7/8” 10.40 lb/ft X-95 w/ 2-7/8” RFO 3-7/8” OD x 2-5/32” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 2-7/8” RFO
Interchangeable With 2-7/8” OH Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.84 lbs
TOOL JOINT DATA
Outside Diameter 3-7/8” Inside Diameter 2-5/32”
API Drift 1.963” Rabbit OD, Suggested 1-7/8”
Minimum Make-up Torque 5,300 ft-lbs Maximum Recommend Make-up Torque 5,800 ft-lbs
Torsional Yield Strength 8,800 ft-lbs Tensile Strength 347,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 271,500 lbs 210,900 lbs
Slip Crushing / Slip Type (SDML) 234,000 lbs 183,300 lbs Burst Pressure 20,900 psi 20,200 psi
Collapse Pressure 20,900 psi 18,000 psi Torsional Yield Strength 14,600 ft-lbs 11,200 ft-lbs
Capacity W/ Tool Joint 0.189 US gal/ft 0.189 US gal/ft Displacement W/ Tool Joint 0.166 US gal/ft 0.157 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278203003066200
1/20/04
2-7/8” 10.40 lb/ft G-105 w/ 2-7/8” RFO 3-7/8” OD x 2-5/32” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection 2-7/8” RFO
Interchangeable With 2-7/8” OH Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.16 lbs
TOOL JOINT DATA
Outside Diameter 3-7/8” Inside Diameter 2-5/32”
API Drift 1.963” Rabbit OD, Suggested 1-7/8”
Minimum Make-up Torque 5,300 ft-lbs Maximum Recommend Make-up Torque 5,800 ft-lbs
Torsional Yield Strength 8,800 ft-lbs Tensile Strength 247,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 300,100 lbs 233,100 lbs
Slip Crushing / Slip Type (SDML) 258,700 lbs 202,600 lbs Burst Pressure 23,100 psi 22,300 psi
Collapse Pressure 23,100 psi 19,900 psi Torsional Yield Strength 16,200 ft-lbs 12,400 ft-lbs
Capacity W/ Tool Joint 0.189 US gal/ft 0.189 US gal/ft Displacement W/ Tool Joint 0.166 US gal/ft 0.157 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204003066200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ 2-7/8” RFO 3-7/8” OD x 2-5/32” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-7/8” RFO
Interchangeable With 2-7/8” OH Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 3-7/8” Inside Diameter 2-5/32”
API Drift 1.963” Rabbit OD, Suggested 1-7/8”
Minimum Make-up Torque 5,300 ft-lbs Maximum Recommend Make-up Torque 5,800 ft-lbs
Torsional Yield Strength 8,800 ft-lbs Tensile Strength 347,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.189 US gal/ft 0.189 US gal/ft Displacement W/ Tool Joint 0.166 US gal/ft 0.157 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204179032200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ 2-7/8” HT SLH90 3-1/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-7/8” HT SLH90
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.49 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-5/16”
Minimum Make-up Torque 3,400 ft-lbs Maximum Recommend Make-up Torque 5,100 ft-lbs
Torsional Yield Strength 8,600 ft-lbs Tensile Strength 273,000 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 lbs 15,900 lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.155 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278202183001200
1/20/04
2-7/8” 10.40 lb/ft X-95 w/ 2-3/8” HT SLH90 3-1/8” OD x 1.975” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 2-3/8” HT SLH90
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1.975”
API Drift 1.850” Rabbit OD, Suggested 1-13/16”
Minimum Make-up Torque 3,100 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 7,500 ft-lbs Tensile Strength 212,200 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 271,500 lbs 210,900 lbs
Slip Crushing / Slip Type (SDML) 234,000 lbs 183,300 lbs Burst Pressure 20,900 psi 20,200 psi
Collapse Pressure 20,900 psi 18,000 psi Torsional Yield Strength 14,600 ft-lbs 11,200 ft-lbs
Capacity W/ Tool Joint 0.187 US gal/ft 0.187 US gal/ft Displacement W/ Tool Joint 0.158 US gal/ft
Tool joint is weaker than tube in tension.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204183001200
4/7/05
2-7/8” 10.40 lb/ft S-135 w/ 2-3/8” HT SLH90 3-1/8” OD x 1.975” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 2-3/8” HT SLH90
Interchangeable With Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.41 lbs
TOOL JOINT DATA
Outside Diameter 3-1/8” Inside Diameter 1.975”
API Drift 1.850” Rabbit OD, Suggested 1.788”
Minimum Make-up Torque 3,200 ft-lbs Maximum Recommend Make-up Torque 4,600 ft-lbs
Torsional Yield Strength 7,600 ft-lbs Tensile Strength 212,200 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.187 US gal/ft 0.185 US gal/ft Displacement W/ Tool Joint 0.159 US gal/ft 0.155 US gal/ft
NOTE: Tool joint is weaker in tension than tube.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278203026011200
1/20/04
2-7/8” 10.40 lb/ft G-105 w/ NC 26 3-3/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 26
Interchangeable With 2-3/8” IF Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.49 lbs
TOOL JOINT DATA
Outside Diameter 3-3/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,125 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 6,875 ft-lbs Tensile Strength 303,794 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.731”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.221 sq in Maximum Hook Load/Tensile Strength 300,000 lbs 233,100 lbs
Slip Crushing / Slip Type (SDXL) 264,396 lbs 207,784 lbs Burst Pressure 23,112 psi 21,150 psi
Collapse Pressure 23,137 psi 19,900 psi Torsional Yield Strength 16,200 ft-lbs 12,400 ft-lbs
Capacity W/ Tool Joint 0.185 US gal/ft 0.185 US gal/ft Displacement W/ Tool Joint 0.160 US gal/ft 0.157 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278201026011200
1/20/04
2-7/8” 10.40 lb/ft E-75 w/ NC 26 3-5/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 26
Interchangeable With 2-3/8” IF Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.99 lbs
TOOL JOINT DATA
Outside Diameter 3-5/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,250 ft-lbs Maximum Recommend Make-up Torque 4,700 ft-lbs
Torsional Yield Strength 7,100 ft-lbs Tensile Strength 313,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 214,300 lbs 166,500 lbs
Slip Crushing / Slip Type (SDML) 184,800 lbs 144,700 lbs Burst Pressure 16,500 psi 15,900 psi
Collapse Pressure 16,500 psi 14,200 psi Torsional Yield Strength 11,600 ft-lbs 8,900 ft-lbs
Capacity W/ Tool Joint 0.185 US gal/ft 0.185 US gal/ft Displacement W/ Tool Joint 0.164 US gal/ft 0.155 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204026011200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ NC 26 3-5/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 26
Interchangeable With 2-3/8” IF Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.90 lbs
TOOL JOINT DATA
Outside Diameter 3-5/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,300 ft-lbs Maximum Recommend Make-up Torque 4,700 ft-lbs
Torsional Yield Strength 7,100 ft-lbs Tensile Strength 313,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.185 US gal/ft 0.185 US gal/ft Displacement W/ Tool Joint 0.165 US gal/ft 0.156 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204126011200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ HT 26 3-5/8” OD x 1-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 26
Interchangeable With Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.03 lbs
TOOL JOINT DATA
Outside Diameter 3-5/8” Inside Diameter 1-1/2”
API Drift 1-3/8” Rabbit OD, Suggested 1-5/16”
Minimum Make-up Torque 5,400 ft-lbs Maximum Recommend Make-up Torque 7,900 ft-lbs
Torsional Yield Strength 13,200 ft-lbs Tensile Strength 390,300 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858” 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.169 US gal/ft 0.164 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204926011200
3/4/04
2-7/8” 10.40 lb/ft S-135 w/ Left Hand HT 26
DRILL PIPE SPECIFICATIONS Grade S-135
Connection Left Hand HT 26 Interchangeable With
Upset Type IU Nominal Weight per Foot 10.40 lbs
Adjusted Weight With Tool Joint per Foot 11.05 lbs
TOOL JOINT DATA Outside Diameter 3-5/8”
Inside Diameter 1-1/2” API Drift 1-3/8”
Rabbit OD, Suggested 1-5/16” Minimum Make-up Torque 5,400 ft-lbs
Maximum Recommend Make-up Torque 7,900 ft-lbs Torsional Yield Strength 31,100 ft-lbs
Tensile Strength 390,300 lbs
TUBE DATA New Premium
Outside Diameter 2-7/8” 2.730” Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,750 psi 28,640 psi
Collapse Pressure 29,710 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.183 US gal/ft 0.183 US gal/ft Displacement W/ Tool Joint 0.169 US gal/ft 0.164 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278201626031200
1/20/04
2-7/8” 10.40 lb/ft E-75 w/ Left Hand NC 26 3-3/8” OD x 1-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection Left Hand NC 26
Interchangeable With Left Hand 2-3/8” IF Upset Type IU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 10.99 lbs
TOOL JOINT DATA
Outside Diameter 3-3/8” Inside Diameter 1-3/4”
API Drift 1-5/8” Rabbit OD, Suggested 1-9/16”
Minimum Make-up Torque 4,100 ft-lbs Maximum Recommend Make-up Torque 4,500 ft-lbs
Torsional Yield Strength 6,900 ft-lbs Tensile Strength 313,700 ft-lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 214,300 lbs 166,500 lbs
Slip Crushing / Slip Type (SDML) 184,800 lbs 144,700 lbs Burst Pressure 16,500 psi 15,900 psi
Collapse Pressure 16,500 psi 14,200 psi Torsional Yield Strength 11,600 ft-lbs 8,900 ft-lbs
Capacity W/ Tool Joint 0.184 US gal/ft 0.184 US gal/ft Displacement W/ Tool Joint 0.168 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278203031034200
1/20/04
2-7/8” 10.40 lb/ft G-105 w/ NC 31 4-1/8” OD x 2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.43 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2”
API Drift 1-7/8” Rabbit OD, Suggested 1-13/16”
Minimum Make-up Torque 7,900 ft-lbs Maximum Recommend Make-up Torque 8,700 ft-lbs
Torsional Yield Strength 13,200 ft-lbs Tensile Strength 495,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 300,100 lbs 233,100 lbs
Slip Crushing / Slip Type (SDML) 258,700 lbs 202,600 lbs Burst Pressure 23,100 psi 22,300 psi
Collapse Pressure 23,100 psi 19,900 psi Torsional Yield Strength 16,200 ft-lbs 12,400 ft-lbs
Capacity W/ Tool Joint 0.187 US gal/ft 0.187 US gal/ft Displacement W/ Tool Joint 0.173 US gal/ft 0.162 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278204031034200
1/22/04
2-7/8” 10.40 lb/ft S-135 w/ NC 31 4-1/8” OD x 2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.29 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2”
API Drift 1-7/8” Rabbit OD, Suggested 1-13/16”
Minimum Make-up Torque 7,900 ft-lbs Maximum Recommend Make-up Torque 8,700 ft-lbs
Torsional Yield Strength 13,200 ft-lbs Tensile Strength 495,700 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 385,800 lbs 299,800 lbs
Slip Crushing / Slip Type (SDML) 332,600 lbs 260,400 lbs Burst Pressure 29,700 psi 28,600 psi
Collapse Pressure 29,700 psi 25,600 psi Torsional Yield Strength 20,800 ft-lbs 15,900 ft-lbs
Capacity W/ Tool Joint 0.187 US gal/ft 0.187 US gal/ft Displacement W/ Tool Joint 0.173 US gal/ft 0.162 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
278201031035200
1/20/04
2-7/8” 10.40 lb/ft E-75 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type EU
Nominal Weight per Foot 10.40 lbs Adjusted Weight With Tool Joint per Foot 11.17 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift 2” Rabbit OD, Suggested 1-7/8”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 2-7/8” 2.730”
Inside Diameter 2.151” 2.151” Wall Thickness 0.362” 0.290”
Cross Sectional Area 2.858 sq in 2.220 sq in Maximum Hook Load/Tensile Strength 214,300 lbs 166,500 lbs
Slip Crushing / Slip Type (SDML) 184,800 lbs 144,700 lbs Burst Pressure 16,500 psi 15,900 psi
Collapse Pressure 16,500 psi 14,200 psi Torsional Yield Strength 11,600 ft-lbs 8,900 ft-lbs
Capacity W/ Tool Joint 0.189 US gal/ft 0.189 US gal/ft Displacement W/ Tool Joint 0.171 US gal/ft 0.160 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350201031035200
1/21/04
3-1/2” 13.30 lb/ft E-75 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type IU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 13.75 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift, New 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.352”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 271,600 lbs 212,200 lbs
Slip Crushing (SDXL) 233,600 lbs 183,700 lbs Burst Pressure 13,800 psi 13,200 psi
Collapse Pressure 14,100 psi 12,000 psi Torsional Yield Strength 18,600 ft-lbs 14,400 ft-lbs
Capacity W/ Tool Joint 0.304 US gal/ft 0.304 US gal/ft Displacement W/ Tool Joint 0.210 Us gal/ft 0.203 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202031035200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type IU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 13.75 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift 2.00” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.304 US gal/ft 0.304 US gal/ft Displacement W/ Tool Joint 0.210 US gal/ft 0.203 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203031035200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type IU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 13.75 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift 2.00” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.304 US gal/ft 0.304 US gal/ft Displacement W/ Tool Joint 0.210 US gal/ft 0.203 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204031035200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type IU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 13.75 lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift 2.00” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in *Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.304 US gal/ft 0.304 US gal/ft Displacement W/ Tool Joint 0.210 US gal/ft 0.203 US gal/ft
* Tool joint weaker that tube
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204231119200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ XT 31 4” OD x 2-5/32” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 31
Interchangeable With Upset Type IU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 13.78 lbs
TOOL JOINT DATA
Outside Diameter 4” Inside Diameter 2-5/32”
API Drift 2-3/32” Rabbit OD, Suggested 1-31/32”
Minimum Make-up Torque 6,700 ft-lbs Maximum Recommend Make-up Torque 10,700 ft-lbs
Torsional Yield Strength 17,800 ft-lbs Tensile Strength 402,600 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing / Slip Type (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.303 US gal/ft 0.303 US gal/ft Displacement W/ Tool Joint 0.211 US gal/ft 0.199 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203038014200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 15.07 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 14,630 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 693,900 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing / Slip Type (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.307 US gal/ft 0.307 US gal/ft Displacement W/ Tool Joint 0.231 US gal/ft 0.209 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350201038056200
1/21/04
3-1/2” 13.30 lb/ft E-75 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC-38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.47 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 552,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 271,600 lbs 212,200 lbs
Slip Crushing / Slip Type (SDXL) 233,600 lbs 183,700 lbs Burst Pressure 13,800 psi 13,200 psi
Collapse Pressure 14,100 psi 12,000 psi Torsional Yield Strength 18,600 ft-lbs 14,400 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.221 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038016200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.91 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 10,200 ft-lbs Maximum Recommend Make-up Torque 12,200 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing / Slip Type (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.228 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038036200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.68 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,100 ft-lbs Maximum Recommend Make-up Torque 13,300 ft-lbs
Torsional Yield Strength 20,200 ft-lbs Tensile Strength 552,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing / Slip Type (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.225 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038056200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.47 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 552,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing / Slip Type (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.221 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203038016200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.93 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 10,200 ft-lbs Maximum Recommend Make-up Torque 12,200 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing / Slip Type (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.228 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038036200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.68 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.225 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038056200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 Lbs Adjusted Weight With Tool Joint per Foot 14.47 Lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,600 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.221 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038076200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.26 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.218 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038076300
1/21/04
3-1/2” 13.30 lb/ft S-135 Class 2 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.26 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.279”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.258”
Cross Sectional Area 3.621 sq in 2.445 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 330,100 lbs
Slip Crushing / Slip Type (SDXL) 420,400 lbs 285,500 lbs Burst Pressure 24,800 psi 19,900 psi
Collapse Pressure 25,400 psi 18,400 psi Torsional Yield Strength 33,400 ft-lbs 22,300 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.218 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038036210
1/21/04
3-1/2” 13.30 lb/ft Internal Coating S-135 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Internal Coating TK 34 XT Nominal Weight per Foot 13.30 lbs
Adjusted Weight With Tool Joint per Foot 14.68 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Minimum Make-up Torque 12,200 ft-lbs
Maximum Recommend Make-up Torque 13,400 ft-lbs Torsional Yield Strength 20,300 ft-lbs
Tensile Strength 649,200 lbs
TUBE DATA New Premium
Outside Diameter 3-1/2” 3.353” Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.225 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204038036212
9/23/04
3-1/2” 13.30 lb/ft Internal Coating S-135 w / NC 38 4-7/8” x 2-9/16” TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC-38
Interchangeable With 3-1/2” IF Internal Coating TK 34 XT
Upset Type EU Nominal Weight per Foot 13.30 lbs
Adjusted Weight With Tool Joint per Foot 14.68 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Hard Band TCS 8000
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing / Slip Type (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.225 US gal/ft 0.207 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204138036200
1/21/04
3-1/2” 13.30 lb/ft S-135 w/ HT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.93 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 27,000 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.228 US gal/ft 0.209 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350208238036200
1/21/04
3-1/2” 13.30 lb/ft SS-95 w/ XT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade SS-95 Connection XT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 15.13 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 10,700 ft-lbs Maximum Recommend Make-up Torque 17,400 ft-lbs
Torsional Yield Strength 29,000 ft-lbs Tensile Strength 549,700 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing / Slip Type (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.309 US gal/ft 0.309 US gal/ft Displacement W/ Tool Joint 0.228 US gal/ft 0.209 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350201038038200
1/21/04
3-1/2” 13.30 lb/ft E-75 w/ NC 38 4-7/8” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.51 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,900 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,100 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 271,600 lbs 212,200 lbs
Slip Crushing (SDXL) 233,600 lbs 183,700 lbs Burst Pressure 13,800 psi 13,200 psi
Collapse Pressure 14,100 psi 12,000 psi Torsional Yield Strength 18,600 ft-lbs 14,400 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.222 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350201038058200
1/21/04
3-1/2” 13.30 lb/ft E-75 w/ NC 38 4-3/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.30 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,800 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,000 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 271,600 lbs 212,200 lbs
Slip Crushing (SDXL) 233,600 lbs 183,700 lbs Burst Pressure 13,800 psi 13,200 psi
Collapse Pressure 14,100 psi 12,000 psi Torsional Yield Strength 18,600 ft-lbs 14,400 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.219 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350201038078200
1/21/04
3-1/2” 13.30 lb/ft E-75 w/ NC 38 4-5/8” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.09 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 271,600 lbs 212,200 lbs
Slip Crushing (SDXL) 233,600 lbs 183,700 lbs Burst Pressure 13,800 psi 13,200 psi
Collapse Pressure 14,100 psi 12,000 psi Torsional Yield Strength 18,600 ft-lbs 14,400 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.216 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038038200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 4-7/8” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.51 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,900 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,100 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.222 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease
Where possible all figures are obtained from OEM data source
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038058200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 4-3/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.30 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,800 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,000 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.219 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350202038078200
1/21/04
3-1/2” 13.30 lb/ft X-95 w/ NC 38 4-5/8” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.09 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 344,000 lbs 268,700 lbs
Slip Crushing (SDXL) 295,900 lbs 232,700 lbs Burst Pressure 17,500 psi 16,700 psi
Collapse Pressure 17,900 psi 15,200 psi Torsional Yield Strength 23,500 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.216 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203038038200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 38 4-7/8” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.51 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,900 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,100 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.222 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203038058200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 38 4-3/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.30 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,800 ft-lbs Maximum Recommend Make-up Torque 11,900 ft-lbs
Torsional Yield Strength 18,000 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.219 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350203038078200
1/21/04
3-1/2” 13.30 lb/ft G-105 w/ NC 38 4-5/8” x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 13.30 lbs Adjusted Weight With Tool Joint per Foot 14.10 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 587,300 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 380,200 lbs 297,000 lbs
Slip Crushing (SDXL) 327,000 lbs 257,200 lbs Burst Pressure 19,300 psi 18,400 psi
Collapse Pressure 19,800 psi 16,800 psi Torsional Yield Strength 26,000 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.216 US gal/ft 0.205 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350204738078212
2/17/04
3-1/2” 13.30 lb/ft Internal Coating S-135 w/ TuffTorq 38 4-5/8” OD x 2-11/16” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection TT 38
Interchangeable With Upset Type EU
Internal Coating TK 34 XT Nominal Weight per Foot 13.30 lbs
Adjusted Weight With Tool Joint per Foot 14.18 lbs
TOOL JOINT DATA Outside Diameter 4-5/8”
Inside Diameter 2-11/16” API Drift 2-9/16”
Rabbit OD, Suggested 2-1/2” Hard Band Box End TCS 8000
Minimum Make-up Torque 9,792 ft-lbs Maximum Recommend Make-up Torque 12,819 ft-lbs
Torsional Yield Strength 21,364 ft-lbs Tensile Strength 587,308 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.353”
Inside Diameter 2.764” 2.764” Wall Thickness 0.368” 0.294”
Cross Sectional Area 3.621 sq in 2.829 sq in Maximum Hook Load/Tensile Strength 488,800 lbs 381,900 lbs
Slip Crushing / Slip Type (SDXL) 420,400 lbs 330,600 lbs Burst Pressure 24,800 psi 23,700 psi
Collapse Pressure 25,400 psi 21,600 psi Torsional Yield Strength 33,400 ft-lbs 25,900 ft-lbs
Capacity W/ Tool Joint 0.311 US gal/ft 0.311 US gal/ft Displacement W/ Tool Joint 0.216 US gal/ft 0.203 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302031035200
1/21/04
3-1/2” 15.50 lb/ft X-95 w/ NC 31 4-1/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 31
Interchangeable With 2-7/8” IF Upset Type IU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.09 Lbs
TOOL JOINT DATA
Outside Diameter 4-1/8” Inside Diameter 2-1/8”
API Drift 2.00” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 7,100 ft-lbs Maximum Recommend Make-up Torque 7,800 ft-lbs
Torsional Yield Strength 11,900 ft-lbs Tensile Strength 447,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing (SDXL) 351,600 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038011200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 5” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.54 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-1/8”
API Drift 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 15,900 ft-lbs Maximum Recommend Make-up Torque 17,500 ft-lbs
Torsional Yield Strength 26,500 ft-lbs Tensile Strength 720,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.268 US gal/ft 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038031200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-7/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.31 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-1/8”
API Drift 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 13,700 ft-lbs Maximum Recommend Make-up Torque 15,100 ft-lbs
Torsional Yield Strength 22,900 ft-lbs Tensile Strength 720,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.273 US gal/ft 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038051200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-3/4” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.10 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-1/8
API Drift 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 720,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038071200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-5/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.89 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-1/8”
API Drift 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 9,350 ft-lbs Maximum Recommend Make-up Torque 10,300 ft-lbs
Torsional Yield Strength 15,600 ft-lbs Tensile Strength 720,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.258 US gal/ft 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038071300
1/21/04
3-1/2” 15.50 lb/ft G-105 Class 2 w/ NC 38 4-5/8” OD x 2-1/8” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.89 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-1/8”
API Drift 2” Rabbit OD, Suggested 1-15/16”
Minimum Make-up Torque 9,350 ft-lbs Maximum Recommend Make-up Torque 10,300 ft-lbs
Torsional Yield Strength 15,600 ft-lbs Tensile Strength 720,100 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 302,400 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 262,000 lbs Burst Pressure 23,600 psi 18,900 psi
Collapse Pressure 23,500 psi 18,400 psi Torsional Yield Strength 29,500 ft-lbs 19,400 ft-lbs
Capacity W/ Tool Joint 0.270 US gal/ft 0.270 US gal/ft Displacement W/ Tool Joint 0.258 US gal/ft 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038122200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 5-1/2” OD x 2-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.86 lbs
TOOL JOINT DATA
Outside Diameter 5-1/2” Inside Diameter 2-1/4”
API Drift 2-1/8” Rabbit OD, Suggested 2-1/16”
Minimum Make-up Torque 15,300 ft-lbs Maximum Recommend Make-up Torque 16,800 ft-lbs
Torsional Yield Strength 25,500 ft-lbs Tensile Strength 675,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.272 US gal/ft 0.272 US gal/ft Displacement W/ Tool Joint 0.273 US gal/ft 0.244 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038014200
1/21/04
3-1/2” 15.50 lb/ft E-75 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.16 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 14,600 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 250,600 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 217,300 lbs Burst Pressure 16,800 psi 16,200 psi
Collapse Pressure 16,800 psi 14,500 psi Torsional Yield Strength 21,100 ft-lbs 16,100 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038014200
1/21/04
3-1/2” 15.50 lb/ft X-95 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.16 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 14,600 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing / Slip Type (SDXL) 351,600 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038014300
1/21/04
3-1/2” 15.50 lb/ft X-95 Class 2 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.16 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,200 ft-lbs Maximum Recommend Make-up Torque 14,500 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 273,500 lbs
Slip Crushing / Slip Type (SDXL) 351,600 lbs 237,100 lbs Burst Pressure 21,300 psi 17,100 psi
Collapse Pressure 21,200 psi 16,700 psi Torsional Yield Strength 26,700 ft-lbs 17,500 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038034300
1/21/04
3-1/2” 15.50 lb/ft X-95 Class 2 w/ NC 38 4-7/8” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.94 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,200 ft-lbs Maximum Recommend Make-up Torque 14,500 ft-lbs
Torsional Yield Strength 22,100 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 273,500 lbs
Slip Crushing / Slip Type (SDXL) 351,600 lbs 237,100 lbs Burst Pressure 21,300 psi 17,100 psi
Collapse Pressure 21,200 psi 16,700 psi Torsional Yield Strength 26,700 ft-lbs 17,500 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.259 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038054300
1/21/04
3-1/2” 15.50 lb/ft X-95 Class 2 w/ NC 38 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.72 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 408,00 lbs 273,500 lbs
Slip Crushing / Slip Type (SDXL) 351,600 lbs 237,100 lbs Burst Pressure 21,300 psi 17,100 psi
Collapse Pressure 21,200 psi 16,700 psi Torsional Yield Strength 26,700 ft-lbs 17,500 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.256 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038074300
1/21/04
3-1/2” 15.50 lb/ft X-95 Class 2 w/ NC 38 4-5/8” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.52 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 9,350 ft-lbs Maximum Recommend Make-up Torque 10,300 ft-lbs
Torsional Yield Strength 15,600 ft-lbs Tensile Strength 603,000 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 273,500 lbs
Slip Crushing / Slip Type (SDXL) 351,600 lbs 237,100 lbs Burst Pressure 21,300 psi 17,100 psi
Collapse Pressure 21,200 psi 16,700 psi Torsional Yield Strength 26,700 ft-lbs 17,500 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038054200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.16 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 9,600 ft-lbs Maximum Recommend Make-up Torque 11,500 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 693,700 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038014200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.13 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 11,100 ft-lbs Maximum Recommend Make-up Torque 13,300 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 708,100 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038016200
1/21/04
3-1/2” 15.50 lb/ft E-75 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.16 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 552,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 250,600 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 217,300 lbs Burst Pressure 16,900 psi 16,800 psi
Collapse Pressure 16,800 psi 14,500 psi Torsional Yield Strength 21,100 ft-lbs 16,100 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038036200
1/21/04
3-1/2” 15.50 lb/ft E-75 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.77 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 250,600 lbs
Slip Crushing (SDXL) 277,600 lbs 217,300 lbs Burst Pressure 16,800 psi 16,200 psi
Collapse Pressure 16,800 psi 14,500 psi Torsional Yield Strength 21,100 ft-lbs 16,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.257 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038056200
1/21/04
3-1/2” 15.50 lb/ft E-75 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,600 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 250,600 lbs
Slip Crushing (SDXL) 277,600 lbs 217,300 lbs Burst Pressure 16,800 psi 16,200 psi
Collapse Pressure 16,800 psi 14,500 psi Torsional Yield Strength 21,100 ft-lbs 16,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038076200
1/21/04
3-1/2” 15.50 lb/ft E-75 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.36 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 250,600 lbs
Slip Crushing (SDXL) 277,600 lbs 217,300 lbs Burst Pressure 16,800 psi 16,200 psi
Collapse Pressure 16,800 psi 14,500 psi Torsional Yield Strength 21,100 ft-lbs 16,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.276 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038016300
1/21/04
3-1/2” 15.50 lb/ft E-75 Class 2 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.99 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 552,200 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 215,900 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 187,200 lbs Burst Pressure 16,800 psi 13,500 psi
Collapse Pressure 16,800 psi 13,200 psi Torsional Yield Strength 21,100 ft-lbs 13,800 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.260 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038036300
1/21/04
3-1/2” 15.50 lb/ft E-75 Class 2 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.77 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,100 ft-lbs Maximum Recommend Make-up Torque 13,310 ft-lbs
Torsional Yield Strength 20,200 ft-lbs Tensile Strength 552,200 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 215,900 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 187,200 lbs Burst Pressure 16,800 psi 13,500 psi
Collapse Pressure 16,800 psi 13,200 psi Torsional Yield Strength 21,100 ft-lbs 13,800 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.257 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038056300
1/21/04
3-1/2” 15.50 lb/ft E-75 Class 2 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 552,200 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 215,900 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 187,200 lbs Burst Pressure 16,800 psi 13,500 psi
Collapse Pressure 16,800 psi 13,200 psi Torsional Yield Strength 21,100 ft-lbs 13,800 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350301038076300
1/21/04
3-1/2” 15.50 lb/ft E-75 Class 2 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.36 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,350 ft-lbs Maximum Recommend Make-up Torque 10,300 ft-lbs
Torsional Yield Strength 15,600 ft-lbs Tensile Strength 552,200 lbs
TUBE DATA
New Class 2 Outside Diameter 3-1/2” 3.231”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.314”
Cross Sectional Area 4.304 sq in 2.880 sq in Maximum Hook Load/Tensile Strength 322,800 lbs 215,900 lbs
Slip Crushing / Slip Type (SDXL) 277,600 lbs 187,200 lbs Burst Pressure 16,800 psi 13,500 psi
Collapse Pressure 16,800 psi 13,200 psi Torsional Yield Strength 21,100 ft-lbs 13,800 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.250 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038036200
1/21/04
3-1/2” 15.50 lb/ft X-95 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.77 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing (SDXL) 351,600 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.257 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038056200
1/21/04
3-1/2” 15.50 lb/ft X-95 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,600 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing (SDXL) 351,600 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350302038076200
1/21/04
3-1/2” 15.50 lb/ft X-95 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.35 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing (SDXL) 351,600 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.250 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038036200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.77 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.257 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038056200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,600 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303038076200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.35 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.250 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038016200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.99 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 10,200 ft-lbs Maximum Recommend Make-up Torque 12,200 ft-lbs
Torsional Yield Strength 20,400 ft-lbs Tensile Strength 635,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.260 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038036200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.77 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.257 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038056200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,600 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304038076200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 4-5/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.35 lbs
TOOL JOINT DATA
Outside Diameter 4-5/8” Inside Diameter 2-9/16”
API Drift, New 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,300 ft-lbs Maximum Recommend Make-up Torque 10,200 ft-lbs
Torsional Yield Strength 15,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.250 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350303638056200
1/21/04
3-1/2” 15.50 lb/ft G-105 w/ NC 38 Left Hand 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 38 Left Hand
Interchangeable With 3-1/2” IF Left Hand Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.56 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,650 ft-lbs
Torsional Yield Strength 19,200 ft-lbs Tensile Strength 552,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 psi
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304138036200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ HT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.00 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,400 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.260 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304338056200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ Hydril Wedge Thread 38 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection Hydril WT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.13 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,000 ft-lbs Maximum Recommend Make-up Torque 31,500 ft-lbs
Torsional Yield Strength 41,000 ft-lbs Tensile Strength 877,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304438056200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ NC 38 DSTJ 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38 DSTJ
Interchangeable With Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 17.13 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 14,500 ft-lbs Maximum Recommend Make-up Torque 15,950 ft-lbs
Torsional Yield Strength 27,100 ft-lbs Tensile Strength 648,800 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.253 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350308238036200
1/21/04
3-1/2” 15.50 lb/ft SS-95 w/ XT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade SS-95 Connection XT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.96 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16 Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 10,700 ft-lbs Maximum Recommend Make-up Torque 17,400 ft-lbs
Torsional Yield Strength 29,000 ft-lbs Tensile Strength 549,700 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 408,800 lbs 317,500 lbs
Slip Crushing / Slip Type (SDXL) 351,700 lbs 275,300 lbs Burst Pressure 21,300 psi 20,600 psi
Collapse Pressure 21,200 psi 18,300 psi Torsional Yield Strength 26,700 ft-lbs 20,500 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.259 US gal/ft 0.240 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350309238036200
1/21/04
3-1/2” 15.50 lb/ft SS-105 w/ XT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade SS-105 Connection XT 38
Interchangeable With Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.96 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 10,700 ft-lbs Maximum Recommend Make-up Torque 17,400 ft-lbs
Torsional Yield Strength 29,000 ft-lbs Tensile Strength 549,700 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.259 US gal/ft 0.242 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350307038058201
1/21/04
3-1/2” 15.50 lb/ft CY-105 w/ NC 38 4-3/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade CY-105 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 16.43 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Arnco 100 XT Smooth Edge Hard Banding Minimum Make-up Torque 9,100 ft-lbs
Maximum Recommend Make-up Torque 9,700 ft-lbs Torsional Yield Strength 18,100 ft-lbs
Tensile Strength 587,300 lbs
TUBE DATA New Premium
Outside Diameter 3-1/2” 3.320” Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 451,900 lbs 350,900 lbs
Slip Crushing / Slip Type (SDXL) 388,700 lbs 304,200 lbs Burst Pressure 23,600 psi 22,700 psi
Collapse Pressure 23,500 psi 20,300 psi Torsional Yield Strength 29,500 ft-lbs 22,600 ft-lbs
Capacity W/ Tool Joint 0.277 US gal/ft 0.277 US gal/ft Displacement W/ Tool Joint 0.251 US gal/ft 0.238 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304239014200
1/21/04
3-1/2” 15.50 lb/ft S-135 w/ XTM 39 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XTM 39
Interchangeable With Upset Type IEU
Nominal Weight per Foot 15.50 lbs Adjusted Weight With Tool Joint per Foot 18.35 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 14,700 ft-lbs Maximum Recommend Make-up Torque 23,200 ft-lbs
Torsional Yield Strength 38,900 ft-lbs Tensile Strength 785,000 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.274 US gal/ft 0.274 US gal/ft Displacement W/ Tool Joint 0.268 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
350304839002223
5/28/04
3-1/2” 15.50 lb/ft Internal Coating S-135 w / XTM 39 5” OD x 2-9/16” ID Arnco 100 XT Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XTM 39
Interchangeable With Internal Coating TK 34 P
Upset Type IEU Nominal Weight per Foot 15.50 lbs
Adjusted Weight With Tool Joint per Foot 17.13 lbs
TOOL JOINT DATA Outside Diameter 5”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Hard Band Arnco 100 XT
Minimum Make-up Torque 14,700 ft-lbs Maximum Recommend Make-up Torque 22,300 ft-lbs
Torsional Yield Strength 37,200 ft-lbs Tensile Strength 729,700 lbs
TUBE DATA
New Premium Outside Diameter 3-1/2” 3.320”
Inside Diameter 2.602” 2.602” Wall Thickness 0.449” 0.359”
Cross Sectional Area 4.304 sq in 3.342 sq in Maximum Hook Load/Tensile Strength 581,000 lbs 451,100 lbs
Slip Crushing / Slip Type (SDXL) 499,700 lbs 391,200 lbs Burst Pressure 30,300 psi 29,200 psi
Collapse Pressure 30,200 psi 26,000 psi Torsional Yield Strength 38,000 ft-lbs 29,100 ft-lbs
Capacity W/ Tool Joint 0.276 US gal/ft 0.276 US gal/ft Displacement W/ Tool Joint 0.262 US gal/ft 0.240 US gal/ft
NOTE: THE USE OF A STABBING GUIDE IS REQUIRED WITH THIS CONNECTION.
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400201006133200
1/21/04
4” 14.00 lb/ft E-75 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.25 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 285,400 lbs 224,200 lbs
Slip Crushing (SDXL) 239,900 lbs 189,600 lbs Burst Pressure 10,800 psi 10,200 psi
Collapse Pressure 11,400 psi 9,000 psi Torsional Yield Strength 23,300 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.219 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400202006133200
1/21/04
4” 14.00 lb/ft X-95 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.25 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 361,500 lbs 284,000 lbs
Slip Crushing (SDXL) 303,900 lbs 240,200 lbs Burst Pressure 13,700 psi 12,900 psi
Collapse Pressure 14,400 psi 10,800 psi Torsional Yield Strength 29,500 ft-lbs 23,000 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.219 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400203006133200
1/21/04
4” 14.00 lb/ft G-105 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.25 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 399,500 lbs 313,900 lbs
Slip Crushing (SDXL) 335,900 lbs 265,500 lbs Burst Pressure 15,200 psi 14,300 psi
Collapse Pressure 15,900 psi 11,600 psi Torsional Yield Strength 32,600 ft-lbs 25,500 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.219 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204006133200
1/21/04
4” 14.00 lb/ft S-135 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.25 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.219 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204006135200
1/21/04
4” 14.00 lb/ft S-135 w/ 3-1/2” XH 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.09 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,000 ft-lbs Maximum Recommend Make-up Torque 9,900 ft-lbs
Torsional Yield Strength 15,000 ft-lbs Tensile Strength 512,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.444 US gal/ft 0.444 US gal/ft Displacement W/ Tool Joint 0.231 US gal/ft 0.217 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204006135300
1/21/04
4” 14.00 lb/ft S-135 Class 2 w/ 3-1/2” XH 4-3/4” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.09 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,000 ft-lbs Maximum Recommend Make-up Torque 9,900 ft-lbs
Torsional Yield Strength 15,000 ft-lbs Tensile Strength 512,000 lbs
TUBE DATA
New Class 2 Outside Diameter 4.000” 3.802”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.231”
Cross Sectional Area 3.805 sq in 2.592 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 349,800 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 295,200 lbs Burst Pressure 19,500 psi 15,600 psi
Collapse Pressure 20,200 psi 10,500 psi Torsional Yield Strength 41,900 ft-lbs 28,300 ft-lbs
Capacity W/ Tool Joint 0.444 US gal/ft 0.444 US gal/ft Displacement W/ Tool Joint 0.231 US gal/ft 0.217 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204038012200
1/21/04
4” 14.00 lb/ft S-135 w/ NC 38 5” OD x 2-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.80 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-1/4”
API Drift 2-1/8” Rabbit OD, Suggested 2-1/16”
Minimum Make-up Torque 15,000 ft-lbs Maximum Recommend Make-up Torque 16,500 ft-lbs
Torsional Yield Strength 24,900 ft-lbs Tensile Strength 776,500 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.439 US gal/ft 0.439 US gal/ft Displacement W/ Tool Joint 0.245 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138014200
1/21/04
4” 14.00 lb/ft S-135 w/ HT 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.83 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 12,900 ft-lbs Maximum Recommend Make-up Torque 19,300 ft-lbs
Torsional Yield Strength 32,100 ft-lbs Tensile Strength 707,800 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.440 US gal/ft 0.440 US gal/ft Displacement W/ Tool Joint 0.242 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138034200
1/21/04
4” 14.00 lb/ft S-135 w/ HT 38 4-7/8” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.83 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 12,900 ft-lbs Maximum Recommend Make-up Torque 19,300 ft-lbs
Torsional Yield Strength 32,100 ft-lbs Tensile Strength 707,800 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.440 US gal/ft 0.440 US gal/ft Displacement W/ Tool Joint 0.242 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138016200
1/21/04
4” 14.00 lb/ft S-135 w/ HT 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.96 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,300 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,600 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.440 US gal/ft 0.440 US gal/ft Displacement W/ Tool Joint 0.244 US gal/ft 0.221 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138036200
1/21/04
4” 14.00 lb/ft S-135 w/ HT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.65 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.239 US gal/ft 0.221 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138036211
1/21/04
4” 14.00 lb/ft Internal Coating S-135 w/ HT 38 4-7/8” OD x 2-9/16” ID w/ X 7000 Hard Banding Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Internal Coating TK 34 XT Nominal Weight per Foot 14.00 lbs
Adjusted Weight With Tool Joint per Foot 15.65 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Hard Band X 7000
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204138036212
1/21/04
4” 14.00 lb/ft Internal Coating S-135 w/ HT 38 4 7/8” OD x 2 9/16” ID w/ TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT-38
Interchangeable With Upset Type IU
Internal Coating TK 34 XT Nominal Weight per Foot 14.00 lbs
Adjusted Weight With Tool Joint per Foot 15.71 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Hard Band Box End 1/8” Proud TCS 8000
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,400 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.442 US gal/ft 0.442 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239021200
1/21/04
4” 14.00 lb/ft S-135 w/ XT39 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT39
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 16.12 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 14,800 ft-lbs Maximum Recommend Make-up Torque 25,400 ft-lbs
Torsional Yield Strength 42,400 ft-lbs Tensile Strength 785,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDML) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.440 US gal/ft 0.440 US gal/ft Displacement W/ Tool Joint 0.247 US gal/ft 0.222 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239022200
1/21/04
4” 14.00 lb/ft S-135 w/ XT 39 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.94 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 14,600 ft-lbs Maximum Recommend Make-up Torque 24,300 ft-lbs
Torsional Yield Strength 40,500 ft-lbs Tensile Strength 726,100 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.441 US gal/ft 0.441 US gal/ft Displacement W/ Tool Joint 0.244 US gal/ft 0.222 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239032200
1/21/04
4” 14.00 lb/ft S-135 w/ XT 39 4-7/8” OD x 2-9/16” ID Tool Joints
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.69 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,500 ft-lbs Maximum Recommend Make-up Torque 22,300 ft-lbs
Torsional Yield Strength 37,100 ft-lbs Tensile Strength 729,700 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.441 US gal/ft 0.441 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.222 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239032212
1/21/04
4” 14.00 lb/ft Internal Coating S-135 w/ XT 39 4-7/8” OD x 2-9/16” ID w/ TCS-8000 Hard Band Tool Joints
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Internal Coating TK 34 XT Nominal Weight per Foot 14.00 lbs
Adjusted Weight With Tool Joint per Foot 15.69 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-9/16” API Drift 2-7/16”
Rabbit OD, Suggested 2-3/8” Hard Band TCS-8000 1/8” Proud
Minimum Make-up Torque 12,500 ft-lbs Maximum Recommend Make-up Torque 22,300 ft-lbs
Torsional Yield Strength 37,100 ft-lbs Tensile Strength 729,700 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.441 US gal/ft 0.441 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.222 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239032204
1/21/04
4” 14.00 lb/ft S-135 w/ XT 39 4-7/8” OD x 2-9/16” ID Arnco 100 XT Hard Band Tool Joints
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.69 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Arnco 100XT Hard Band 3/32” Proud-Box End Minimum Make-up Torque 12,500 ft-lbs
Maximum Recommend Make-up Torque 22,300 ft-lbs Torsional Yield Strength 37,100 ft-lbs
Tensile Strength 729,700 lbs
TUBE DATA New Premium
Outside Diameter 4.000” 3.868” Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.441 US gal/ft 0.441 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.222 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease. Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239034200
1/21/04
4” 14.00 lb/ft S-135 w/ XT 39 4-7/8” OD x 2 13/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.42 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-13/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 12,000 ft-lbs Maximum Recommend Make-up Torque 19,700 ft-lbs
Torsional Yield Strength 32,800 ft-lbs Tensile Strength 599,500 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.446 US gal/ft 0.446 US gal/ft Displacement W/ Tool Joint 0.236 US gal/ft 0.216 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239034212
1/21/04
4” 14.00 lb/ft Internal Coating S-135 w/ XT 39 4-7/8” OD x 2 13/16” ID TCS-8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Internal Coating TK 34 XT Nominal Weight per Foot 14.00 lbs
Adjusted Weight With Tool Joint per Foot 15.42 lbs
TOOL JOINT DATA Outside Diameter 4-7/8”
Inside Diameter 2-13/16” API Drift 2-9/16”
Rabbit OD, Suggested 2-1/2” Hard Band TCS-8000 1/8” Proud
Minimum Make-up Torque 12,000 ft-lbs Maximum Recommend Make-up Torque 19,700 ft-lbs
Torsional Yield Strength 32,800 ft-lbs Tensile Strength 599,500 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.446 US gal/ft 0.446 US gal/ft Displacement W/ Tool Joint 0.236 US gal/ft 0.216 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400202040037200
1/21/04
4” 14.00 lb/ft X-95 w/ NC 40 5-1/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.76 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 15,400 ft-lbs Maximum Recommend Make-up Torque 16,900 ft-lbs
Torsional Yield Strength 25,700 ft-lbs Tensile Strength 761,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 361,500 lbs 284,000 lbs
Slip Crushing / Slip Type (SDXL) 303,900 lbs 240,200 lbs Burst Pressure 13,700 psi 12,900 psi
Collapse Pressure 14,400 psi 10,800 psi Torsional Yield Strength 29,500 ft-lbs 23,000 ft-lbs
Capacity W/ Tool Joint 0.445 US gal/ft 0.445 US gal/ft Displacement W/ Tool Joint 0.240 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204040037200
1/21/04
4” 14.00 lb/ft S-135 w/ NC 40 5-1/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.76 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 15,400 ft-lbs Maximum Recommend Make-up Torque 16,900 ft-lbs
Torsional Yield Strength 25,700 ft-lbs Tensile Strength 761,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.445 US gal/ft 0.445 US gal/ft Displacement W/ Tool Joint 0.241 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204040037212
1/21/04
4” 14.00 lb/ft Internal Coating S-135 w/ NC 40 5-1/4” OD x 2-11/16” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Internal Coating TK 34 XT Nominal Weight per Foot 14.00 lbs
Adjusted Weight With Tool Joint per Foot 15.76 lbs
TOOL JOINT DATA Outside Diameter 5-1/4”
Inside Diameter 2-11/16” API Drift 2-9/16”
Rabbit OD, Suggested 2-1/2” Hard Band TCS 8000 3/32” Proud
Minimum Make-up Torque 15,400 ft-lbs Maximum Recommend Make-up Torque 16,900 ft-lbs
Torsional Yield Strength 25,700 ft-lbs Tensile Strength 776,400 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.445 US gal/ft 0.445 US gal/ft Displacement W/ Tool Joint 0.241 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204140037200
1/21/04
4” 14.00 lb/ft S-135 w/ HT 40 5-1/4” OD x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 40
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 16.27 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 15,550 ft-lbs Maximum Recommend Make-up Torque 21,500 ft-lbs
Torsional Yield Strength 35,900 ft-lbs Tensile Strength 776,400 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.444 US gal/ft 0.444 US gal/ft Displacement W/ Tool Joint 0.246 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400201040039200
1/21/04
4” 14.00 lb/ft E-75 w/ NC 40 5-1/4” OD x 2-13/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.68 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-13/16”
API Drift 2-11/16” Rabbit OD, Suggested 2-5/8”
Minimum Make-up Torque 14,100 ft-lbs Maximum Recommend Make-up Torque 15,500 ft-lbs
Torsional Yield Strength 23,500 ft-lbs Tensile Strength 711,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 285,400 lbs 224,200 lbs
Slip Crushing (SDXL) 239,900 lbs 189,600 lbs Burst Pressure 10,800 psi 10,200 psi
Collapse Pressure 11,300 psi 9,000 psi Torsional Yield Strength 23,300 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.447 US gal/ft 0.447 US gal/ft Displacement W/ Tool Joint 0.238 US gal/ft 0.221 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400202040039200
1/21/04
4” 14.00 lb/ft X-95 w/ NC 40 5-1/4” OD x 2-13/16” ID Tool Joints
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.68 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-13/16”
API Drift 2-11/16” Rabbit OD, Suggested 2-5/8”
Minimum Make-up Torque 14,100 ft-lbs Maximum Recommend Make-up Torque 15,500 ft-lbs
Torsional Yield Strength 23,500 ft-lbs Tensile Strength 711,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 361,500 lbs 284,000 lbs
Slip Crushing (SDXL) 303,900 lbs 240,200 lbs Burst Pressure 13,700 psi 12,900 psi
Collapse Pressure 14,400 psi 10,800 psi Torsional Yield Strength 29,500 ft-lbs 23,000 ft-lbs
Capacity W/ Tool Joint 0.447 US gal/ft 0.447 US gal/ft Displacement W/ Tool Joint 0.238 US gal/ft 0.221 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204040039200
1/21/04
4” 14.00 lb/ft S-135 w/ NC 40 5-1/4” OD x 2-13/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 15.68 lbs
TOOL JOINT DATA
Outside Diameter 5-1/4” Inside Diameter 2-13/16”
API Drift 2-11/16” Rabbit OD, Suggested 2-5/8”
Minimum Make-up Torque 14,100 ft-lbs Maximum Recommend Make-up Torque 15,500 ft-lbs
Torsional Yield Strength 23,500 ft-lbs Tensile Strength 711,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.447 US gal/ft 0.447 US gal/ft Displacement W/ Tool Joint 0.238 US gal/ft 0.221 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400201540001200
1/21/04
4” 14.00 lb/ft E-75 w/ NC 40 Pin Up Connection 5-1/4” OD Box / 4-7/8” OD Pin x 2-13/16” ID
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 16.10 lbs
TOOL JOINT DATA
Outside Diameter B 5-1/4” P 4-7/8” Inside Diameter 2-13/16”
API Drift 2-11/16” Rabbit OD, Suggested 2-5/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,700 ft-lbs
Torsional Yield Strength 23,100 ft-lbs Tensile Strength 711,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 285,400 lbs 224,200 lbs
Slip Crushing / Slip Type (SDXL) 239,900 lbs 189,600 lbs Burst Pressure 10,800 psi 10,200 psi
Collapse Pressure 11,300 psi 9,000 psi Torsional Yield Strength 23,300 ft-lbs 18,200 ft-lbs
Capacity W/ Tool Joint 0.447 US gal/ft 0.447 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.219 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204540001200
1/21/04
4” 14.00 lb/ft S-135 w/ NC 40 Pin Up Connection 5-1/4” OD Box / 4-7/8” OD Pin x 2-13/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 40
Interchangeable With 4” FH Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 16.10 lbs
TOOL JOINT DATA
Outside Diameter B 5-1/4” P 4-7/8” Inside Diameter 2-13/16”
API Drift 2-11/16” Rabbit OD, Suggested 2-5/8”
Minimum Make-up Torque 11,500 ft-lbs Maximum Recommend Make-up Torque 12,700 ft-lbs
Torsional Yield Strength 23,100 ft-lbs Tensile Strength 711,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.447 US gal/ft 0.447 US gal/ft Displacement W/ Tool Joint 0.233 US gal/ft 0.220 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204440001200
2/18/04
4” 14.00 lb/ft S-135 w/ 4” DSTJ-2 Pin Up 5-1/4” OD Box / 4-7/8” OD Pin x 2-11/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection DSTJ-2 Pin Up
Interchangeable With Upset Type IU
Nominal Weight per Foot 14.00 lbs Adjusted Weight With Tool Joint per Foot 18.00 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Pin / 5-1/4” Box Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Minimum Make-up Torque 16,600 ft-lbs Maximum Recommend Make-up Torque 18,300 ft-lbs
Torsional Yield Strength 27,700 ft-lbs Tensile Strength 776,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.868”
Inside Diameter 3.340” 3.340” Wall Thickness 0.330” 0.264”
Cross Sectional Area 3.805 sq in 2.989 sq in Maximum Hook Load/Tensile Strength 513,600 lbs 403,500 lbs
Slip Crushing / Slip Type (SDXL) 431,900 lbs 341,300 lbs Burst Pressure 19,500 psi 18,400 psi
Collapse Pressure 20,100 psi 13,800 psi Torsional Yield Strength 41,900 ft-lbs 32,800 ft-lbs
Capacity W/ Tool Joint 0.441 US gal/ft 0.441 US gal/ft Displacement W/ Tool Joint 0.246 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400301006133200
1/21/04
4” 15.70 lb/ft E-75 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.15 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 324,100 lbs 253,900 lbs
Slip Crushing / Slip Type (SDXL) 272,500 lbs 214,900 lbs Burst Pressure 12,500 psi 11,800 psi
Collapse Pressure 12,900 psi 10,900 psi Torsional Yield Strength 25,800 ft-lbs 20,100 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400302006133200
1/21/04
4” 15.70 lb/ft X-95 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 4” SH
Interchangeable With 3-1/2” XH Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.15 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 410,500 lbs 321,500 lbs
Slip Crushing / Slip Type (SDXL) 344,200 lbs 272,200 lbs Burst Pressure 15,800 psi 15,000 psi
Collapse Pressure 16,300 psi 13,800 psi Torsional Yield Strength 32,700 ft-lbs 25,400 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400303006133200
1/21/04
4” 15.70 lb/ft G-105 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.15 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 453,800 lbs 355,400 lbs
Slip Crushing / Slip Type (SDXL) 381,500 lbs 300,900 lbs Burst Pressure 17,500 psi 16,600 psi
Collapse Pressure 18,100 psi 15,200 psi Torsional Yield Strength 36,100 ft-lbs 28,100 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400304006133200
1/21/04
4” 15.70 lb/ft S-135 w/ 3-1/2” XH 4-3/4” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 3-1/2” XH
Interchangeable With 4” SH Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.15 lbs
TOOL JOINT DATA
Outside Diameter 4-3/4” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 10,100 ft-lbs Maximum Recommend Make-up Torque 11,100 ft-lbs
Torsional Yield Strength 16,900 ft-lbs Tensile Strength 570,900 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 583,400 lbs 456,900 lbs
Slip Crushing / Slip Type (SDXL) 490,500 lbs 386,900 lbs Burst Pressure 22,400 psi 21,300 psi
Collapse Pressure 23,200 psi 18,600 psi Torsional Yield Strength 46,500 ft-lbs 36,100 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400302038014200
1/21/04
4” 15.70 lb/ft X-95 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 14,600 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 630,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 410,500 lbs 321,500 lbs
Slip Crushing / Slip Type (SDXL) 345,200 lbs 272,200 lbs Burst Pressure 15,800 psi 15,000 psi
Collapse Pressure 16,300 psi 13,800 psi Torsional Yield Strength 32,700 ft-lbs 25,400 ft-lbs
Capacity W/ Tool Joint 0.428 US gal/ft Displacement W/ Tool Joint 0.272 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400302038016200
1/21/04
4” 15.70 lb/ft X-95 w/ NC 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 13,400 ft-lbs
Torsional Yield Strength 20,300 ft-lbs Tensile Strength 577,100 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 410,500 lbs 321,50 lbs
Slip Crushing / Slip Type (SDXL) 345,200 lbs 272,200 lbs Burst Pressure 15,800 psi 15,000 psi
Collapse Pressure 16,300 psi 13,800 psi Torsional Yield Strength 32,700 ft-lbs 25,400 ft-lbs
Capacity W/ Tool Joint 0.417 US gal/ft Displacement W/ Tool Joint 0.263 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400304138036200
1/21/04
4” 15.70 lb/ft S-135 w/ HT 38 4-7/8” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.27 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 12,200 ft-lbs Maximum Recommend Make-up Torque 17,700 ft-lbs
Torsional Yield Strength 29,500 ft-lbs Tensile Strength 649,200 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 583,400 lbs 456,900 lbs
Slip Crushing / Slip Type (SDXL) 490,500 lbs 386,900 lbs Burst Pressure 22,400 psi 21,300 psi
Collapse Pressure 23,200 psi 18,600 psi Torsional Yield Strength 46,500 ft-lbs 36,100 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400304338016200
1/21/04
4” 15.70 lb/ft S-135 w/ Hydril Wedge Thread 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection Hydril WT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 16.80 lbs
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,000 ft-lbs Maximum Recommend Make-up Torque 31,500 ft-lbs
Torsional Yield Strength 41,000 ft-lbs Tensile Strength 877,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 583,400 lbs 456,900 lbs
Slip Crushing / Slip Type (SDXL) 490,500 lbs 386,900 lbs Burst Pressure 22,400 psi 21,300 psi
Collapse Pressure 23,200 psi 18,600 psi Torsional Yield Strength 46,500 ft-lbs 36,100 ft-lbs
Capacity W/ Tool Joint 0.418 US gal/ft Displacement W/ Tool Joint 0.265 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400204239033204
1/21/04
4” 15.70 lb/ft S-135 w/ XT 39 4-7/8” OD x 2-11/16” ID w/ Arnco 100 XT Hard Banding Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 39
Interchangeable With Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot 17.15 lbs
TOOL JOINT DATA
Outside Diameter 4-7/8” Inside Diameter 2-11/16”
API Drift 2-9/16” Rabbit OD, Suggested 2-1/2”
Hard Banding Arnco 100 XT Minimum Make-up Torque 12,400 ft-lbs
Maximum Recommend Make-up Torque 21,200 ft-lbs Torsional Yield Strength 35,300 ft-lbs
Tensile Strength 664,300 lbs
TUBE DATA New Premium
Outside Diameter 4.000” 3.848” Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 583,400 lbs 456,900 lbs
Slip Crushing / Slip Type (SDXL) 490,500 lbs 386,900 lbs Burst Pressure 22,400 psi 21,300 psi
Collapse Pressure 23,200 psi 18,600 psi Torsional Yield Strength 46,500 ft-lbs 36,100 ft-lbs
Capacity W/ Tool Joint 0.419 US gal/ft 0.419 US gal/ft Displacement W/ Tool Joint 0.260 US gal/ft 0.244 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400308038014200
1/21/04
4” 15.70 lb/ft SS-95 w/ NC 38 5” OD x 2-7/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade SS-95 Connection NC 38
Interchangeable With 3-1/2” IF Upset Type EU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-7/16”
API Drift 2-5/16” Rabbit OD, Suggested 2-1/4”
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 14,600 ft-lbs
Torsional Yield Strength 22,200 ft-lbs Tensile Strength 630,600 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 410,500 lbs 321,500 lbs
Slip Crushing / Slip Type (SDXL) 345,200 lbs 272,200 lbs Burst Pressure 15,800 psi 15,000 psi
Collapse Pressure 16,300 psi 13,800 psi Torsional Yield Strength 32,700 ft-lbs 25,400 ft-lbs
Capacity W/ Tool Joint Displacement W/ Tool Joint
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
400301338016200
1/21/04
4” 15.70 lb/ft SU-95 w/ Hydril Wedge Thread 38 5” OD x 2-9/16” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade SU 95 Connection WT 38
Interchangeable With Upset Type IU
Nominal Weight per Foot 15.70 lbs Adjusted Weight With Tool Joint per Foot
TOOL JOINT DATA
Outside Diameter 5” Inside Diameter 2-9/16”
API Drift 2-7/16” Rabbit OD, Suggested 2-3/8”
Minimum Make-up Torque 9,000 ft-lbs Maximum Recommend Make-up Torque 31,500 ft-lbs
Torsional Yield Strength 41,000 ft-lbs Tensile Strength 877,000 lbs
TUBE DATA
New Premium Outside Diameter 4.000” 3.848”
Inside Diameter 3.240” 3.240” Wall Thickness 0.380” 0.304”
Cross Sectional Area 4.322 sq in 3.385 sq in Maximum Hook Load/Tensile Strength 410,500 lbs 321,500 lbs
Slip Crushing / Slip Type (SDXL) 345,200 lbs 272,200 lbs Burst Pressure 15,800 psi 15,000 psi
Collapse Pressure 16,300 psi 13,800 psi Torsional Yield Strength 32,700 ft-lbs 25,400 ft-lbs
Capacity W/ Tool Joint 0.428 US gal/ft 0.428 US gal/ft Displacement W/ Tool Joint 0.265 US gal/ft 0.223 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450204843196212
11/8/04
4-1/2” 16.60 lb/ft Internal Coating S-135 w/ XTM 43 5-1/4” OD x 3-1/8” TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XTM 43
Interchangeable With Internal Coating TK 34 XT
Upset Type IU Nominal Weight per Foot 16.60 lbs
Adjusted Weight With Tool Joint per Foot 17.90 lbs
TOOL JOINT DATA Outside Diameter 5-1/4”
Inside Diameter 3-1/8” API Drift 3-1/16”
Rabbit OD, Suggested 2-5/16” Hard Band TCS 8000
Minimum Make-up Torque 18,500 ft-lbs Maximum Recommend Make-up Torque 22,200 ft-lbs
Torsional Yield Strength 37,000 ft-lbs Tensile Strength 692,400 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 595,000 lbs 468,300 lbs
Slip Crushing / Slip Type (SDXL) 489,000 lbs 387,300 lbs Burst Pressure 17,700 psi 16,700 psi
Collapse Pressure 16,800 psi 11,000 psi Torsional Yield Strength 55,500 ft-lbs 43,500 ft-lbs
Capacity W/ Tool Joint 0.584 US gal/ft 0.584 US gal/ft Displacement W/ Tool Joint 0.276 US gal/ft 0.258 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450204843197212
1/27/04
4-1/2” 16.60 lb/ft Internal Coating S-135 w/ XTM 43 5-1/4” OD x 3-1/4” TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XTM 43
Interchangeable With Internal Coating TK 34 XT
Upset Type IU Nominal Weight per Foot 16.60 lbs
Adjusted Weight With Tool Joint per Foot 17.90 lbs
TOOL JOINT DATA Outside Diameter 5-1/4”
Inside Diameter 3-1/4” API Drift 3-1/8”
Rabbit OD, Suggested 3-1/16” Hard Band TCS 8000
Minimum Make-up Torque 13,300 ft-lbs Maximum Recommend Make-up Torque 19,500 ft-lbs
Torsional Yield Strength 32,500 ft-lbs Tensile Strength 617,300 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 595,000 lbs 468,300 lbs
Slip Crushing / Slip Type (SDXL) 489,000 lbs 387,300 lbs Burst Pressure 17,700 psi 16,700 psi
Collapse Pressure 16,800 psi 11,000 psi Torsional Yield Strength 55,500 ft-lbs 43,500 ft-lbs
Capacity W/ Tool Joint 0.584 US gal/ft 0.584 US gal/ft Displacement W/ Tool Joint 0.276 US gal/ft 0.258 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450202046055200
1/22/04
4-1/2” 16.60 lb/ft X-95 w/ NC 46 6-1/4” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 16.60 lbs Adjusted Weight With Tool Joint per Foot 19.59 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 23,500 ft-lbs Maximum Recommend Make-up Torque 25,900 ft-lbs
Torsional Yield Strength 39,200 ft-lbs Tensile Strength 1,048,400 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 418,700 lbs 329,500 lbs
Slip Crushing / Slip Type (SDXL) 344,100 lbs 272,500 lbs Burst Pressure 12,400 psi 11,700 psi
Collapse Pressure 12,800 psi 8,900 psi Torsional Yield Strength 39,000 ft-lbs 30,600 ft-lbs
Capacity W/ Tool Joint 0.582 US gal/ft 0.582 US gal/ft Displacement W/ Tool Joint 0.300 US gal/ft 0.269 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450203046055200
1/22/04
4-1/2” 16.60 lb/ft G-105 w/ NC 46 6-1/4” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 16.60 lbs Adjusted Weight With Tool Joint per Foot 19.59 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 23,500 ft-lbs Maximum Recommend Make-up Torque 25,900 ft-lbs
Torsional Yield Strength 39,200 ft-lbs Tensile Strength 1,048,400 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 462,800 lbs 364,200 lbs
Slip Crushing / Slip Type (SDXL) 380,400 lbs 301,200 lbs Burst Pressure 13,800 psi 12,970 psi
Collapse Pressure 13,800 psi 9,500 psi Torsional Yield Strength 43,100 ft-lbs 33,800 ft-lbs
Capacity W/ Tool Joint 0.582 US gal/ft 0.582 US gal/ft Displacement W/ Tool Joint 0.300 US gal/ft 0.269 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450204046055200
1/22/04
4-1/2” 16.60 lb/ft S-135 w/ NC 46 6-1/4” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 16.60 lbs Adjusted Weight With Tool Joint per Foot 19.59 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 23,500 ft-lbs Maximum Recommend Make-up Torque 25,900 ft-lbs
Torsional Yield Strength 39,200 ft-lbs Tensile Strength 1,048,400 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 595,000 lbs 468,300 lbs
Slip Crushing / Slip Type (SDXL) 489,000 lbs 387,300 lbs Burst Pressure 17,700 psi 16,700 psi
Collapse Pressure 16,800 psi 11,000 psi Torsional Yield Strength 55,500 ft-lbs 43,500 ft-lbs
Capacity W/ Tool Joint 0.582 US gal/ft 0.582 US gal/ft Displacement W/ Tool Joint 0.300 US gal/ft 0.269 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450201046057200
1/22/04
4-1/2” 16.60 lb/ft E-75 w/ NC 46 6-1/4” OD x 3-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 16.60 lbs Adjusted Weight With Tool Joint per Foot 18.73 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3-1/2”
API Drift 3-1/8” Rabbit OD, Suggested 3-1/16”
Minimum Make-up Torque 20,200 ft-lbs Maximum Recommend Make-up Torque 22,200 ft-lbs
Torsional Yield Strength 33,600 ft-lbs Tensile Strength 901,200 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.365”
Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 330,600 lbs 260,200 lbs
Slip Crushing / Slip Type (SDXL) 271,700 lbs 215,200 lbs Burst Pressure 9,800 psi 9,300 psi
Collapse Pressure 10,4000 psi 7500 psi Torsional Yield Strength 30,800 ft-lbs 24,100 ft-lbs
Capacity W/ Tool Joint 0.591 US gal/ft 0.591 US gal/ft Displacement W/ Tool Joint 0.287 US gal/ft 0.258 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450204746055204
1/22/04
4-1/2” 16.60 lb/ft S-135 w/ Tuff Torque 46 6-1/4” OD x 3-1/4” ID Box & 3” ID Pin Arnco 100 XT Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection TT 46
Interchangeable With NC 46 & 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 16.60 lbs Adjusted Weight With Tool Joint per Foot 19.83 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3-1/4” Box / 3” Pin
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Arnco 100 XT Hard Band 1/8” Proud Box End Minimum Make-up Torque 30,100 ft-lbs
Maximum Recommend Make-up Torque 33,100 ft-lbs Torsional Yield Strength 50,100 ft-lbs
Tensile Strength 1,048,400 lbs
TUBE DATA New Premium
Outside Diameter 4-1/2” 4.365” Inside Diameter 3.826” 3.826” Wall Thickness 0.337” 0.270”
Cross Sectional Area 4.407 sq in 3.469 sq in Maximum Hook Load/Tensile Strength 595,000 lbs 468,300 lbs
Slip Crushing / Slip Type (SDXL) 489,000 lbs 387,300 lbs Burst Pressure 17,700 psi 16,700 psi
Collapse Pressure 16,800 psi 11,000 psi Torsional Yield Strength 55,500 ft-lbs 43,500 ft-lbs
Capacity W/ Tool Joint 0.582 US gal/ft 0.582 US gal/ft Displacement W/ Tool Joint 0.300 US gal/ft 0.269 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450304843195210
1/22/04
4-1/2” 20.00 lb/ft Internal Coating S-135 w/ XT-M43 5-1/4” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT-M43
Interchangeable With Upset Type IEU
Internal Coating TK 34 XT Nominal Weight per Foot 20.00 lbs
Adjusted Weight With Tool Joint per Foot 21.33 lbs
TOOL JOINT DATA Outside Diameter 5-1/4”
Inside Diameter 3” API Drift 2-7/8”
Rabbit OD, Suggested 2-13/16” Minimum Make-up Torque 14,700 ft-lbs
Maximum Recommend Make-up Torque 23,500 ft-lbs Torsional Yield Strength 39,200 ft-lbs
Tensile Strength 764,800 lbs
TUBE DATA New Premium
Outside Diameter 4-1/2” 4.328” Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 724,200 lbs 581,200 lbs
Slip Crushing / Slip Type (SDXL) 610,100 lbs 481,500 lbs Burst Pressure 22,600 psi 20,600 psi
Collapse Pressure 23,300 psi 18,800 psi Torsional Yield Strength 66,400 lbs 51,600 lbs
Capacity W/ Tool Joint 0.529 US gal/ft 0.529 US gal/ft Displacement W/ Tool Joint 0.326 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450301046053200
1/22/04
4-1/2” 20.00 lb/ft E-75 w/ NC 46 6-1/4” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 23.30 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 26,900 ft-lbs Maximum Recommend Make-up Torque 29,600 ft-lbs
Torsional Yield Strength 44,900 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 412,400 lbs 322,900 lbs
Slip Crushing / Slip Type (SDXL) 338,900 lbs 267,500 lbs Burst Pressure 12,500 psi 11,500 psi
Collapse Pressure 13,000 psi 11,000 psi Torsional Yield Strength 36,900 ft-lbs 28,700 ft-lbs
Capacity W/ Tool Joint 0.526 US gal/ft 0.526 US gal/ft Displacement W/ Tool Joint 0.356 US gal/ft 0.329 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450302046053200
1/22/04
4-1/2” 20.00 lb/ft X-95 w/ NC 46 6-1/4” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 23.24 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 26,900 ft-lbs Maximum Recommend Make-up Torque 29,600 ft-lbs
Torsional Yield Strength 44,900 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 522,300 lbs 409,000 lbs
Slip Crushing / Slip Type (SDXL) 429,300 lbs 338,800 lbs Burst Pressure 15,900 psi 14,500 psi
Collapse Pressure 16,400 psi 13,900 psi Torsional Yield Strength 46,700 ft-lbs 36,300 ft-lbs
Capacity W/ Tool Joint 0.526 US gal/ft 0.526 US gal/ft Displacement W/ Tool Joint 0.356 US gal/ft 0.329 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450303046053200
1/22/04
4-1/2” 20.00 lb/ft G-105 w/ NC 46 6-1/4” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 23.30 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 26,900 ft-lbs Maximum Recommend Make-up Torque 29,600 ft-lbs
Torsional Yield Strength 44,900 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 577,300 lbs 452,100 lbs
Slip Crushing / Slip Type (SDXL) 474,500 lbs 374,500 lbs Burst Pressure 17,600 psi 16,100 psi
Collapse Pressure 18,200 psi 15,400 psi Torsional Yield Strength 51,700 ft-lbs 40,200 psi
Capacity W/ Tool Joint 0.526 US gal/ft 0.526 US gal/ft Displacement W/ Tool Joint 0.356 US gal/ft 0.329 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450304046053200
1/22/04
4-1/2” 20.00 lb-ft S-135 w/ NC 46 6-1/4” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 23.30 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 26,900 ft-lbs Maximum Recommend Make-up Torque 29,600 ft-lbs
Torsional Yield Strength 44,900 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 724,200 lbs 581,200 lbs
Slip Crushing / Slip Type (SDXL) 610,100 lbs 481,500 lbs Burst Pressure 22,600 psi 20,600 psi
Collapse Pressure 23,300 psi 18,800 psi Torsional Yield Strength 66,400 ft-lbs 51,600 ft-lbs
Capacity W/ Tool Joint 0.526 US gal/ft 0.526 US gal/ft Displacement W/ Tool Joint 0.356 US gal/ft 0.329 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450302746053200
1/22/04
4-1/2” 20.00 lb/ft X-95 w/ TuffTorq 46 6-1/4” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection TT 46
Interchangeable With NC 46 & 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 23.83 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 31,400 ft-lbs Maximum Recommend Make-up Torque 37,700 ft-lbs
Torsional Yield Strength 62,800 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 522,300 lbs 409,000 lbs
Slip Crushing / Slip Type (SDXL) 429,300 lbs 338,800 lbs Burst Pressure 15,900 psi 14,500 psi
Collapse Pressure 16,400 psi 13,900 psi Torsional Yield Strength 46,700 ft-lbs 36,300 ft-lbs
Capacity W/ Tool Joint 0.526 US gal/ft 0.526 US gal/ft Displacement W/ Tool Joint 0.356 US gal/ft 0.329 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450304046055200
1/22/04
4-1/2” 20.00 lb/ft S-135 w/ NC 46 6-1/4” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 20.00 lbs Adjusted Weight With Tool Joint per Foot 22.92 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 23,800 ft-lbs Maximum Recommend Make-up Torque 26,180 ft-lbs
Torsional Yield Strength 39,700 ft-lbs Tensile Strength 896,400 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.328”
Inside Diameter 3.640” 3.640” Wall Thickness 0.430” 0.344”
Cross Sectional Area 5.498 sq in 4.306 sq in Maximum Hook Load/Tensile Strength 724,200 lbs 581,200 lbs
Slip Crushing / Slip Type (SDXL) 610,100 lbs 481,500 lbs Burst Pressure 22,600 psi 20,600 psi
Collapse Pressure 23,300 psi 18,800 psi Torsional Yield Strength 66,400 ft-lbs 51,600 ft-lbs
Capacity W/ Tool Joint 0.529 US gal/ft 0.529 US gal/ft Displacement W/ Tool Joint 0.351 US gal/ft 0.324 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
450402046057200
1/22/04
4-1/2” 22.82 lb/ft X-95 w/ NC 46 6-1/4” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 46
Interchangeable With 4-1/2” XH Upset Type IEU
Nominal Weight per Foot 22.82 lbs Adjusted Weight With Tool Joint per Foot 25.06 lbs
TOOL JOINT DATA
Outside Diameter 6-1/4” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 26,900 ft-lbs Maximum Recommend Make-up Torque 29,600 ft-lbs
Torsional Yield Strength 44,900 ft-lbs Tensile Strength 1,183,900 lbs
TUBE DATA
New Premium Outside Diameter 4-1/2” 4.300”
Inside Diameter 3.500” 3.500” Wall Thickness 0.500” 0.400”
Cross Sectional Area 6.283 sq in 4.901 sq in Maximum Hook Load/Tensile Strength 596,900 lbs 465,600 lbs
Slip Crushing / Slip Type (SDXL) 490,600 lbs 386,200 lbs Burst Pressure 18,500 psi 15,500 psi
Collapse Pressure 18,800 psi 16,000 psi Torsional Yield Strength 51,800 ft-lbs 40,000 ft-lbs
Capacity W/ Tool Joint 0.500 US gal/ft 0.500 US gal/ft Displacement W/ Tool Joint 0.378 US gal/ft 0.289 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500202050013200
9/13/04
5” 19.50 lb/ft X-95 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 23.49 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 501,100 lbs 394,600 lbs
Slip Crushing / Slip Type (SDXL) 402,600 lbs 319,100 lbs Burst Pressure 12,000 psi 11,300 psi
Collapse Pressure 12,000 psi 8,200 psi Torsional Yield Strength 52,100 ft-lbs 40,900 ft-lbs
Capacity W/ Tool Joint 0.722 US gal/ft 0.722 US gal/ft Displacement W/ Tool Joint 0.359 US gal/ft 0.327 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500203050013200
9/13/04
5” 19.50 lb/ft G-105 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 23.49 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 553,800 lbs 436,100 lbs
Slip Crushing / Slip Type (SDXL) 445,000 lbs 352,700 lbs Burst Pressure 13,300 psi 12,500 psi
Collapse Pressure 13,000 psi 8,800 psi Torsional Yield Strength 57,600 ft-lbs 45,200 ft-lbs
Capacity W/ Tool Joint 0.722 US gal/ft 0.722 US gal/ft Displacement W/ Tool Joint 0.359 US gal/ft 0.327 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500202050018200
12/15/04
5” 19.50 lb/ft X-95 w/ NC 50 6-5/8” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 22.63 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 23,400 ft-lbs Maximum Recommend Make-up Torque 25,700 ft-lbs
Torsional Yield Strength 45,100 ft-lbs Tensile Strength 1,109,900 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 501,100 lbs 394,600 lbs
Slip Crushing / Slip Type (SDXL) 402,600 lbs 319,100 lbs Burst Pressure 12,000 psi 11,300 psi
Collapse Pressure 12,000 psi 8,200 psi Torsional Yield Strength 52,100 ft-lbs 40,900 ft-lbs
Capacity W/ Tool Joint 0.730 US gal/ft 0.730 US gal/ft Displacement W/ Tool Joint 0.346 US gal/ft 0.269 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204050013200
2/18/04
5” 19.50 lb/ft S-135 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 23.49 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,000 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.722 US gal/ft 0.722 US gal/ft Displacement W/ Tool Joint 0.359 US gal/ft 0.327 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204050016200
2/18/04
5” 19.50 lb/ft S-135 w/ NC 50 6-5/8” OD x 3-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 23.08 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3-1/4”
API Drift 3-1/8” Rabbit OD, Suggested 3-1/16”
Minimum Make-up Torque 25,900 ft-lbs Maximum Recommend Make-up Torque 26,800 ft-lbs
Torsional Yield Strength 51,700 ft-lbs Tensile Strength 1,269,000 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,000 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.726 US gal/ft 0.726 US gal/ft Displacement W/ Tool Joint 0.353 US gal/ft 0.322 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204150018200
9/13/04
5” 19.50 lb/ft S-135 w/ HT 50 6-5/8” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 50
Interchangeable With Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 23.12 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 27,200 ft-lbs Maximum Recommend Make-up Torque 39,700 ft-lbs
Torsional Yield Strength 66,200 ft-lbs Tensile Strength 1,109,900 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,000 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.733 US gal/ft 0.733 US gal/ft Displacement W/ Tool Joint 0.322 US gal/ft 0.316 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204750017213
1/22/04
5” 19.50 lb/ft Internal Coating S-135 w/ TuffTorq 50 6-5/8” OD x 3-1/2” ID Armacor M Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection TT 50
Interchangeable With 5” XH & 4-1/2” IF Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 19.50 lbs
Adjusted Weight With Tool Joint per Foot 22.63 lbs
TOOL JOINT DATA Outside Diameter 6-5/8”
Inside Diameter 3-1/2” API Drift 3-3/8”
Rabbit OD, Suggested 3-5/16” Armacor M Hard Band 1/8” Proud Box / Pin
Minimum Make-up Torque 38,200 ft-lbs Maximum Recommend Make-up Torque 42,000 ft-lbs
Torsional Yield Strength 63,730 ft-lbs Tensile Strength 1,099,020 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154” Maximum Hook Load/Tensile Strength 712,000 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.730 US gal/ft 0.730 US gal/ft Displacement W/ Tool Joint 0.346 US gal/ft 0.316 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500201050100200
9/13/04
5” 19.50 lb/ft E-75 w/ NC 50 6-5/8” OD x 3-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 22.16 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3-3/4”
API Drift 3-5/8” Rabbit OD, Suggested 3-9/16”
Minimum Make-up Torque 19,000 ft-lbs Maximum Recommend Make-up Torque 19,800 ft-lbs
Torsional Yield Strength 38,100 ft-lbs Tensile Strength 939,100 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 395,600 lbs 311,500 lbs
Slip Crushing / Slip Type (SDXL) 317,800 lbs 251,900 lbs Burst Pressure 9,500 psi 8,900 psi
Collapse Pressure 10,000 psi 7,000 psi Torsional Yield Strength 41,200 ft-lbs 32,300 ft-lbs
Capacity W/ Tool Joint 0.735 US gal/ft 0.735 US gal/ft Displacement W/ Tool Joint 0.339 US gal/ft 0.311 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204250710212
2/12/04
5” 19.50 lb/ft Internal Coating S-135 w/ XT 50 6-1/2” OD x 3-3/4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 50
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 19.50 lbs
Adjusted Weight With Tool Joint per Foot 22.46 lbs
TOOL JOINT DATA Outside Diameter 6-1/2”
Inside Diameter 3-3/4” API Drift 3-5/8”
Rabbit OD, Suggested 3-9/16” Hard Band TCS 8000
Minimum Make-up Torque 28,000 ft-lbs Maximum Recommend Make-up Torque 46,200 ft-lbs
Torsional Yield Strength 77,000 ft-lbs Tensile Strength 1,085,500 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,100 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.733 US gal/ft 0.733 US gal/ft Displacement W/ Tool Joint 0.344 US gal/ft 0.311 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204250710215
9/23/04
5” 19.50 lb/ft Internal Coating S-135 w/ XT 50 6-1/2” OD x 3-3/4” ID TCS TI Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 50
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 19.50 lbs
Adjusted Weight With Tool Joint per Foot 22.46 lbs
TOOL JOINT DATA Outside Diameter 6-1/2”
Inside Diameter 3-3/4” API Drift 3-5/8”
Rabbit OD, Suggested 3-9/16” Hard Band TCS TI
Minimum Make-up Torque 28,000 ft-lbs Maximum Recommend Make-up Torque 46,200 ft-lbs
Torsional Yield Strength 77,000 ft-lbs Tensile Strength 1,085,500 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,100 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.733 US gal/ft 0.733 US gal/ft Displacement W/ Tool Joint 0.344 US gal/ft 0.311 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500204750310200
1/22/04
5” 19.50 lb/ft S-135 w/ TuffTorq 50 6-1/2” OD x 3-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection TT 50
Interchangeable With NC 50 Upset Type IEU
Nominal Weight per Foot 19.50 lbs Adjusted Weight With Tool Joint per Foot 22.00 lbs
TOOL JOINT DATA
Outside Diameter 6-1/2” Inside Diameter 3-3/4”
API Drift 3-5/8” Rabbit OD, Suggested 3-9/16”
Minimum Make-up Torque 30,100 ft-lbs Maximum Recommend Make-up Torque 33,110 ft-lbs
Torsional Yield Strength 50,171 ft-lbs Tensile Strength 939,095 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.855”
Inside Diameter 4.276” 4.276” Wall Thickness 0.362” 0.290”
Cross Sectional Area 5.275 sq in 4.154 sq in Maximum Hook Load/Tensile Strength 712,000 lbs 560,800 lbs
Slip Crushing / Slip Type (SDXL) 572,100 lbs 453,500 lbs Burst Pressure 17,100 psi 16,100 psi
Collapse Pressure 15,700 psi 10,000 psi Torsional Yield Strength 74,100 ft-lbs 58,100 ft-lbs
Capacity W/ Tool Joint 0.735 US gal/ft 0.735 US gal/ft Displacement W/ Tool Joint 0.335 US gal/ft 0.311 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500304050011200
9/13/04
5” 25.60 lb/ft S-135 w/ NC 50 6-5/8” OD x 2-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 25.60 lbs Adjusted Weight With Tool Joint per Foot 29.36 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 2-3/4”
API Drift 2-5/8” Rabbit OD, Suggested 2-9/16”
Minimum Make-up Torque 31,700 ft-lbs Maximum Recommend Make-up Torque 32,900 ft-lbs
Torsional Yield Strength 63,400 ft-lbs Tensile Strength 1,551,700 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.800”
Inside Diameter 4.000” 4.000” Wall Thickness 0.500” 0.400”
Cross Sectional Area 7.069 sq in 5.529 sq in Maximum Hook Load/Tensile Strength 954,300 lbs 746,400 lbs
Slip Crushing / Slip Type (SDXL) 766,700 lbs 605,200 lbs Burst Pressure 23,600 psi 22,500 psi
Collapse Pressure 24,300 psi 20,500 psi Torsional Yield Strength 94,100 ft-lbs 73,000 ft-lbs
Capacity W/ Tool Joint 0.631 US gal/ft 0.631 US gal/ft Displacement W/ Tool Joint 0.449 US gal/ft 0.417 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500301050013200
9/13/04
5” 25.60 lb/ft E-75 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade E-75 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 25.60 lbs Adjusted Weight With Tool Joint per Foot 28.98 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.800”
Inside Diameter 4.000” 4.000” Wall Thickness 0.500” 0.400”
Cross Sectional Area 7.069 sq in 5.529 sq in Maximum Hook Load/Tensile Strength 530,100 lbs 414,700 lbs
Slip Crushing / Slip Type (SDXL) 425,900 lbs 336,200 lbs Burst Pressure 13,100 psi 12,000 psi
Collapse Pressure 13,500 psi 11,500 psi Torsional Yield Strength 52,300 ft-lbs 40,500 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.443 US gal/ft 0.413 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500302050013200
9/13/04
5” 25.60 lb/ft X-95 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 25.60 lbs Adjusted Weight With Tool Joint per Foot 28.98 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.800”
Inside Diameter 4.000” 4.000” Wall Thickness 0.500” 0.400”
Cross Sectional Area 7.069 sq in 5.529 sq in Maximum Hook Load/Tensile Strength 671,500 lbs 525,300 lbs
Slip Crushing / Slip Type (SDXL) 539,500 lbs 425,900 lbs Burst Pressure 16,600 psi 15,200 psi
Collapse Pressure 17,100 psi 14,500 psi Torsional Yield Strength 66,200 ft-lbs 51,400 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.443 US gal/ft 0.413 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500303050013200
9/13/04
5” 25.60 lb/ft G-105 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 25.60 lbs Adjusted Weight With Tool Joint per Foot 28.98 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.800”
Inside Diameter 4.000” 4.000” Wall Thickness 0.500” 0.400”
Cross Sectional Area 7.069 sq in 5.529 sq in Maximum Hook Load/Tensile Strength 742,200 lbs 580,600 lbs
Slip Crushing / Slip Type (SDXL) 596,300 lbs 470,700 lbs Burst Pressure 18,400 psi 16,800 psi
Collapse Pressure 18,900 psi 16,000 psi Torsional Yield Strength 73,200 ft-lbs 56,800 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.443 US gal/ft 0.413 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
500304050013200
9/13/04
5” 25.60 lb/ft S-135 w/ NC 50 6-5/8” OD x 3” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection NC 50
Interchangeable With 5” XH & 4-1/2” IF Upset Type IEU
Nominal Weight per Foot 25.60 lbs Adjusted Weight With Tool Joint per Foot 28.98 lbs
TOOL JOINT DATA
Outside Diameter 6-5/8” Inside Diameter 3”
API Drift 2-7/8” Rabbit OD, Suggested 2-13/16”
Minimum Make-up Torque 28,900 ft-lbs Maximum Recommend Make-up Torque 30,000 ft-lbs
Torsional Yield Strength 57,800 ft-lbs Tensile Strength 1,416,200 lbs
TUBE DATA
New Premium Outside Diameter 5.000” 4.800”
Inside Diameter 4.000” 4.000” Wall Thickness 0.500” 0.400”
Cross Sectional Area 7.069 sq in 5.529 sq in Maximum Hook Load/Tensile Strength 954,300 lbs 746,400 lbs
Slip Crushing / Slip Type (SDXL) 766,700 lbs 605,200 lbs Burst Pressure 23,600 psi 22,500 psi
Collapse Pressure 24,300 psi 20,500 psi Torsional Yield Strength 94,100 ft-lbs 73,000 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.443 US gal/ft 0.413 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550202016016200
2/18/04
5-1/2” 21.90 lb/ft X-95 w/ 5-1/2” FH 7-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 21.90 lbs Adjusted Weight With Tool Joint per Foot 28.02 lbs
TOOL JOINT DATA
Outside Diameter 7-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 43,500 ft-lbs Maximum Recommend Make-up Torque 47,800 ft-lbs
Torsional Yield Strength 72,500 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.356”
Inside Diameter 4.778” 4.778” Wall Thickness 0.361” 0.289”
Cross Sectional Area 5.828 sq in 4.597 sq in Maximum Hook Load/Tensile Strength 553,700 lbs 436,700 lbs
Slip Crushing / Slip Type (SDXL) 434,900 lbs 345,300 lbs Burst Pressure 10,900 psi 10,000 psi
Collapse Pressure 10,000 psi 6,500 psi Torsional Yield Strength 64,200 ft-lbs 50,500 ft-lbs
Capacity W/ Tool Joint 0.902 US gal/ft 0.902 US gal/ft Displacement W/ Tool Joint 0.418 US gal/ft 0.373 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550204016016200
1/12/04
5-1/2” 21.90 lb/ft S-135 w/ 5-1/2” FH 7-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 21.90 lbs Adjusted Weight With Tool Joint per Foot 28.02 lbs
TOOL JOINT DATA
Outside Diameter 7-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 43,500 ft-lbs Maximum Recommend Make-up Torque 47,800 ft-lbs
Torsional Yield Strength 72,500 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.356”
Inside Diameter 4.778” 4.778” Wall Thickness 0.361” 0.289”
Cross Sectional Area 5.828 sq in 4.597 sq in Maximum Hook Load/Tensile Strength 786,800 lbs 620,600 lbs
Slip Crushing / Slip Type (SDXL) 618,000 lbs 490,600 lbs Burst Pressure 15,500 psi 14,200 psi
Collapse Pressure 12,700 psi 7,500 psi Torsional Yield Strength 91,300 ft-lbs 71,800 ft-lbs
Capacity W/ Tool Joint 0.902 US gal/ft 0.902 US gal/ft Displacement W/ Tool Joint 0.418 US gal/ft 0.373 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550204155095200
2/18/04
5-1/2” 21.90 lb/ft S-135 w/ HT55 7” OD x 4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 21.90 lbs Adjusted Weight With Tool Joint per Foot 25.52 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16”
Minimum Make-up Torque 33,600 ft-lbs Maximum Recommend Make-up Torque 46,300 ft-lbs
Torsional Yield Strength 77,200 ft-lbs Tensile Strength 1,265,800 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.356”
Inside Diameter 4.778” 4.778” Wall Thickness 0.361” 0.289”
Cross Sectional Area 5.828 sq in 4.597 sq in Maximum Hook Load/Tensile Strength 786,800 lbs 620,600 lbs
Slip Crushing / Slip Type (SDXL) 618,000 lbs 490,600 lbs Burst Pressure 15,500 psi 14,200 psi
Collapse Pressure 12,700 psi 7,500 psi Torsional Yield Strength 91,300 ft-lbs 71,800 ft-lbs
Capacity W/ Tool Joint 0.911 US gal/ft 0.911 US gal/ft Displacement W/ Tool Joint 0.388 US gal/ft 0.361 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550204155065200
2/20/04
5-1/2” 21.90 lb/ft S-135 w/ HT55 7-3/8” OD x 4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 21.90 lbs Adjusted Weight With Tool Joint per Foot 26.56 lbs
TOOL JOINT DATA
Outside Diameter 7-3/8” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16”
Minimum Make-up Torque 34,100 ft-lbs Maximum Recommend Make-up Torque 46,800 ft-lbs
Torsional Yield Strength 78,000 ft-lbs Tensile Strength 1,265,800 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.356”
Inside Diameter 4.778” 4.778” Wall Thickness 0.361” 0.289”
Cross Sectional Area 5.828 sq in 4.597 sq in Maximum Hook Load/Tensile Strength 786,800 lbs 620,600 lbs
Slip Crushing / Slip Type (SDXL) 618,000 lbs 490,600 lbs Burst Pressure 15,500 psi 14,200 psi
Collapse Pressure 12,700 psi 7,500 psi Torsional Yield Strength 91,300 ft-lbs 71,800 ft-lbs
Capacity W/ Tool Joint 0.910 US gal/ft 0.910 US gal/ft Displacement W/ Tool Joint 0.406 US gal/ft 0.361 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550204155095204
2/18/04
5-1/2” 21.90 lb/ft S-135 w/ HT 55 7” OD x 4” ID Arnco 100 XT Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 21.90 lbs Adjusted Weight With Tool Joint per Foot 25.38 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16”
Hard Band Arnco 100 XT Minimum Make-up Torque 33,600 ft-lbs
Maximum Recommend Make-up Torque 46,300 ft-lbs Torsional Yield Strength 77,200 ft-lbs
Tensile Strength 1,265,800 lbs
TUBE DATA New Premium
Outside Diameter 5-1/2” 5.356” Inside Diameter 4.778” 4.778” Wall Thickness 0.361” 0.289”
Cross Sectional Area 5.828 sq in 4.597 sq in Maximum Hook Load/Tensile Strength 786,800 lbs 620,600 lbs
Slip Crushing / Slip Type (SDXL) 618,000 lbs 490,600 lbs Burst Pressure 15,500 psi 14,600 psi
Collapse Pressure 12,700 psi 7,500 psi Torsional Yield Strength 91,300 ft-lbs 71,800 ft-lbs
Capacity W/ Tool Joint 0.911 US gal/ft 0.911 US gal/ft Displacement W/ Tool Joint 0.388 US gal/ft 0.361 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550302016056200
1/12/04
5-1/2” 24.70 lb/ft X-95 w/ 5-1/2” FH 7” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 28.41 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 37,750 ft-lbs Maximum Recommend Make-up Torque 41,500 ft-lbs
Torsional Yield Strength 62,900 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 629,800 lbs 495,600 lbs
Slip Crushing / Slip Type (SDXL) 494,700 lbs 392,200 lbs Burst Pressure 12,500 psi 11,500 psi
Collapse Pressure 12,900 psi 9,000 psi Torsional Yield Strength 71,700 ft-lbs 56,100 ft-lbs
Capacity W/ Tool Joint 0.862 US gal/ft 0.862 US gal/ft Displacement W/ Tool Joint 0.435 US gal/ft 0.403 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550302016016200
3/9/05
5-1/2” 24.70 lb/ft X-95 w/ 5-1/2” FH 7-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 29.76 lbs
TOOL JOINT DATA
Outside Diameter 7-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 37,400 ft-lbs Maximum Recommend Make-up Torque 41,200 ft-lbs
Torsional Yield Strength 72,500 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 629,800 lbs 495,600 lbs
Slip Crushing / Slip Type (SDXL) 494,700 lbs 392,200 lbs Burst Pressure 12,500 psi 11,500 psi
Collapse Pressure 12,900 psi 9,000 psi Torsional Yield Strength 71,700 ft-lbs 56,100 ft-lbs
Capacity W/ Tool Joint 0.863 US gal/ft 0.863 US gal/ft Displacement W/ Tool Joint 0.455 US gal/ft 0.412 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550302016016200
2/18/04
5-1/2” 24.70 lb/ft X-95 w/ 5-1/2” FH 7-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 29.76 lbs
TOOL JOINT DATA
Outside Diameter 7-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 43,500 ft-lbs Maximum Recommend Make-up Torque 47,800 ft-lbs
Torsional Yield Strength 72,500 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 629,800 lbs 495,600 lbs
Slip Crushing / Slip Type (SDXL) 494,700 lbs 392,200 lbs Burst Pressure 12,500 psi 11,500 psi
Collapse Pressure 12,900 psi 9,000 psi Torsional Yield Strength 71,700 ft-lbs 56,100 ft-lbs
Capacity W/ Tool Joint 0.863 US gal/ft 0.863 US gal/ft Displacement W/ Tool Joint 0.455 US gal/ft 0.412 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304016016200
1/12/04
5-1/2” 24.70 lb/ft S-135 w/ 5-1/2” FH 7-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 29.76 lbs
TOOL JOINT DATA
Outside Diameter 7-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 43,500 ft-lbs Maximum Recommend Make-up Torque 47,800 ft-lbs
Torsional Yield Strength 72,500 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300 lbs
Slip Crushing / Slip Type (SDXL) 703,000 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.863 US gal/ft 0.863 US gal/ft Displacement W/ Tool Joint 0.455 US gal/ft 0.412 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304155075200
2/18/04
5-1/2” 24.70 lb/ft S-135 w/ HT 55 7” OD x 4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 28.22 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16
Minimum Make-up Torque 33,600 ft-lbs Maximum Recommend Make-up Torque 46,300 ft-lbs
Torsional Yield Strength 77,200 ft-lbs Tensile Strength 1,265,800 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300 lbs
Slip Crushing / Slip Type (SDXL) 702,900 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.873 US gal/ft 0.873 US gal/ft Displacement W/ Tool Joint 0.432 US gal/ft 0.403 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304155075214
2/18/04
5-1/2” 24.70 lb/ft Internal Coating S-135 w/ HT 55 7” OD x 4” ID Arnco 100XT Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT-55
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 24.70 lbs
Adjusted Weight With Tool Joint per Foot 28.22 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4” API Drift 3-7/8”
Rabbit OD, Suggested 3-13/16” Hard Band Arnco 100 XT
Minimum Make-up Torque 33,600 ft-lbs Maximum Recommend Make-up Torque 46,300 ft-lbs
Torsional Yield Strength 77,200 ft-lbs Tensile Strength 1,265,800 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300 lbs
Slip Crushing / Slip Type (SDXL) 702,900 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.873 US gal/ft 0.873 US gal/ft Displacement W/ Tool Joint 0.432 US gal/ft 0.403 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304155065200
2/18/04
5-1/2” 24.70 lb/ft S-135 w/ HT55 7-3/8” OD x 4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 29.31 lbs
TOOL JOINT DATA
Outside Diameter 7-3/8” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16”
Minimum Make-up Torque 34,100 ft-lbs Maximum Recommend Make-up Torque 46,800 ft-lbs
Torsional Yield Strength 78,000 ft-lbs Tensile Strength 1,265,800 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300 lbs
Slip Crushing / Slip Type (SDXL) 703,000 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.872 US gal/ft 0.872 US gal/ft Displacement W/ Tool Joint 0.448 US gal/ft 0.399 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304155065203
12/2/04
5-1/2” 24.70 lb/ft S-135 w/ HT55 7-3/8” OD x 4” ID Armacor M Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT55
Interchangeable With Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 29.31 lbs
TOOL JOINT DATA
Outside Diameter 7-3/8” Inside Diameter 4”
API Drift 3-7/8” Rabbit OD, Suggested 3-13/16”
Hard Band Armacor M Minimum Make-up Torque 34,100 ft-lbs
Maximum Recommend Make-up Torque 46,800 ft-lbs Torsional Yield Strength 78,000 ft-lbs
Tensile Strength 1,265,800 lbs
TUBE DATA New Premium
Outside Diameter 5-1/2” 5.334” Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300 lbs
Slip Crushing / Slip Type (SDXL) 703,000 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.872 US gal/ft 0.872 US gal/ft Displacement W/ Tool Joint 0.448 US gal/ft 0.399 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550302716056200
1/12/04
5-1/2” 24.70 lb/ft X-95 w/ 5-1/2” Tough Torque 7” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade X-95 Connection 5-1/2” TT
Interchangeable With 5-1/2” FH Upset Type IEU
Nominal Weight per Foot 24.70 lbs Adjusted Weight With Tool Joint per Foot 28.43 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-5/16”
Minimum Make-up Torque 44,000 ft-lbs Maximum Recommend Make-up Torque 52,800 ft-lbs
Torsional Yield Strength 88,100 ft-lbs Tensile Strength 1,619,200 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 629,800 lbs 495,600 lbs
Slip Crushing / Slip Type (SDXL) 494,700 lbs 392,200 lbs Burst Pressure 12,500 psi 11,500 psi
Collapse Pressure 12,900 psi 9,000 psi Torsional Yield Strength 71,700 ft-lbs 56,100 ft-lbs
Capacity W/ Tool Joint 0.862 US gal/ft 0.862 US gal/ft Displacement W/ Tool Joint 0.435 US gal/ft 0.403 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304857511212
1/27/04
5-1/2” 24.70 lb/ft Internal Coating S-135 w/ XTM 57 7” OD x 4-1/4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XTM 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 24.70 lbs
Adjusted Weight With Tool Joint per Foot 27.82 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band TCS 8000
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 51,600 ft-lbs
Torsional Yield Strength 86,000 ft-lbs Tensile Strength 1,208,700 lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.334”
Inside Diameter 4.670” 4.670” Wall Thickness 0.415” 0.332”
Cross Sectional Area 6.630 sq in 5.217 sq in Maximum Hook Load/Tensile Strength 895,000 lbs 704,300
Slip Crushing / Slip Type (SDXL) 702,900 lbs 557,400 lbs Burst Pressure 17,800 psi 16,800 psi
Collapse Pressure 17,000 psi 11,200 psi Torsional Yield Strength 101,800 ft-lbs 79,800 ft-lbs
Capacity W/ Tool Joint 0.877 US gal/ft 0.877 US gal/ft Displacement W/ Tool Joint 0.431 US gal/ft 0.401 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304016034400
2/18/04
5-1/2” x 0.750” Wall S-135 Landing String w/ 5-1/2” FH 7-1/4” OD x 3-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 38.00 lbs Adjusted Weight With Tool Joint per Foot 44.95 lbs
TOOL JOINT DATA
Outside Diameter 7-1/4” Inside Diameter 3-1/4”
API Drift 3-1/8” Rabbit OD, Suggested 3-1/16”
Minimum Make-up Torque 39,400 ft-lbs Maximum Recommend Make-up Torque 41,200 ft-lbs
Torsional Yield Strength 78,700 ft-lbs Tensile Strength 1,778,300 lbs
TUBE DATA
New 95% Wall Outside Diameter 5-1/2” 5.425”
Inside Diameter 4.000” 4.000” Wall Thickness 0.750” 0.712”
Cross Sectional Area 11.192 sq in 10.548 sq in Maximum Hook Load/Tensile Strength 1,510,900 lbs 1,424,000 lbs
Slip Crushing / PS-30 750 Ton 1,229,800 lbs 1,162,500 lbs Burst Pressure 32,200 psi 31,000 psi
Collapse Pressure 31,800 psi 31,800 psi Torsional Yield Strength 152,700 ft-lbs 143,400 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.688 US gal/ft 0.637 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304016034410
2/18/04
5-1/2” x 0.750” Wall S-135 Internal Coating Landing String w/ 5-1/2” FH 7-1/4” OD x 3-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 5-1/2” FH
Interchangeable With Upset Type IEU
Internal Coating TK 34 XT Nominal Weight per Foot 38.00 lbs
Adjusted Weight With Tool Joint per Foot 43.39
TOOL JOINT DATA Outside Diameter 7-1/4”
Inside Diameter 3-1/4” API Drift 3-1/8”
Rabbit OD, Suggested 3-1/16” Minimum Make-up Torque 39,400 ft-lbs
Maximum Recommend Make-up Torque 41,200 ft-lbs Torsional Yield Strength 78,700 ft-lbs
Tensile Strength 1,778,300 lbs
TUBE DATA New 95% Wall
Outside Diameter 5-1/2” 5.425” Inside Diameter 4.000” 4.000” Wall Thickness 0.750” 0.712”
Cross Sectional Area 11.192 sq in 10.548 sq in Maximum Hook Load/Tensile Strength 1,510,900 lbs 1,424,000 lbs
Slip Crushing / PS-30 750 Ton 1,645,000 lbs 1,549,000 lbs Burst Pressure 32,200 psi 31,000 psi
Collapse Pressure 31,800 psi 31,800 psi Torsional Yield Strength 152,700 ft-lbs 143,400 ft-lbs
Capacity W/ Tool Joint 0.646 US gal/ft 0.646 US gal/ft Displacement W/ Tool Joint 0.664 US gal/ft 0.631 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
550304016034500
2/18/04
5-1/2” x 0.750” Wall S-135 Landing String w/ 5-1/2” FH 7-1/4” OD x 3-1/4” ID Tool Joint
Slip Proof Section 5.656” OD x 3 1/4” ID
DRILL PIPE SPECIFICATIONS Grade S-135
Connection 5-1/2” FH Interchangeable With
Upset Type IEU Nominal Weight per Foot 38.00 lbs
Adjusted Weight With Tool Joint per Foot 44.95 lbs
TOOL JOINT DATA Outside Diameter 7-1/4”
Inside Diameter 3-1/4” API Drift 3-1/8”
Rabbit OD, Suggested 3-1/16” Minimum Make-up Torque 39,400 ft-lbs
Maximum Recommend Make-up Torque 41,200 ft-lbs Torsional Yield Strength 78,700 ft-lbs
Tensile Strength 1,778,300 lbs
TUBE DATA New 95% Wall
Outside Diameter 5-1/2” 5.425” Inside Diameter 4.000” 4.000” Wall Thickness 0.750” 0.712”
Cross Sectional Area 11.192 sq in 10.548 sq in Maximum Hook Load/Tensile Strength 1,510,900 lbs 1,424,000 lbs
Slip Crushing / PS-30 750 Ton 1,645,000 lbs 1,549,000 lbs Burst Pressure 32,200 psi 31,000 psi
Collapse Pressure 31,800 psi 31,800 psi Torsional Yield Strength 152,700 ft-lbs 143,400 ft-lbs
Capacity W/ Tool Joint 0.634 US gal/ft 0.634 US gal/ft Displacement W/ Tool Joint 0.688 US gal/ft 0.637 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578104257511200
1/22/04
5-7/8” 23.40 lb/ft S-135 w/ XT 57 7” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 57
Interchangeable With Upset Type IEU
Nominal Weight per Foot 23.40 lbs Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 lbs
TUBE DATA
New Premium Outside Diameter 5-7/8” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 844,200 lbs 666,500 lbs
Slip Crushing / Slip Type (SDXL) 651,900 lbs 518,100 lbs Burst Pressure 14,500 psi 13,600 psi
Collapse Pressure 10,800 psi 6,200 psi Torsional Yield Strength 105,500 ft-lbs 83,000 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578204257511201
1/22/04
5-7/8” 23.40 lb/ft S-135 w/ XT-57 7” OD x 4-1/4” ID X7000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT-57
Interchangeable With Upset Type IEU
Nominal Weight per Foot 23.40 lbs Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Hard Band X7000 Inlaid Box Minimum Make-up Torque 33,800 ft-lbs
Maximum Recommend Make-up Torque 56,600 ft-lbs Torsional Yield Strength 94,300 ft-lbs
Tensile Strength 1,208,700 lbs
TUBE DATA New Premium
Outside Diameter 5-7/8” 5.731” Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 844,200 lbs 666,500 lbs
Slip Crushing / Slip Type (SDXL) 651,900 lbs 518,100 lbs Burst Pressure 14,500 psi 13,600 psi
Collapse Pressure 10,800 psi 6,200 psi Torsional Yield Strength 105,500 ft-lbs 83,000 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578104257511225
5/28/04
5-7/8” 23.40 lb/ft Internal Coating S-135 w / XT 57 7” OD x 4-1/4” ID TCS TI Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 23.40 lbs
Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band TCS TI
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 lbs
TUBE DATA
New Premium Outside Diameter 5-7/8” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 844,200 lbs 666,500 lbs
Slip Crushing / Slip Type (SDXL) 651,900 lbs 518,100 lbs Burst Pressure 14,500 psi 13,600 psi
Collapse Pressure 10,800 psi 6,200 psi Torsional Yield Strength 105,500 ft-lbs 83,000 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105257511200
2/27/04
5-7/8” 23.40 lb-ft V-150 w/ XT 57 7” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XT 57
Interchangeable With Upset Type IEU
Nominal Weight per Foot 23.40 lbs Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 lbs
TUBE DATA
New Premium Outside Diameter 5-7/8” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105257511210
1/22/04
5-7/8” 23.40 lb-ft Internal Coating V-150 w/ XT 57 7” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XT 57
Interchangeable With Upset Type IEU
Internal Coating TK 34 XT Nominal Weight per Foot 23.40 lbs
Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Minimum Make-up Torque 33,800 ft-lbs
Maximum Recommend Make-up Torque 56,600 ft-lbs Torsional Yield Strength 94,300 ft-lbs
Tensile Strength 1,208,700 lbs
TUBE DATA New Premium
Outside Diameter 5-7/8” 5.731” Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105257511201
1/22/04
5-7/8” 23.40 lb/ft V-150 w/ XT-57 7” OD x 4-1/4” ID X7000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XT-57
Interchangeable With Upset Type IEU
Nominal Weight per Foot 23.40 lbs Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA
Outside Diameter 7” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Hard Band X7000 Inlaid Box Minimum Make-up Torque 33,800 ft-lbs
Maximum Recommend Make-up Torque 56,600 ft-lbs Torsional Yield Strength 94,300 ft-lbs
Tensile Strength 1,208,700 lbs
TUBE DATA New Premium
Outside Diameter 5-7/8” 5.731” Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105257511211
1/22/04
5-7/8” 23.40 lb/ft Internal Coating V-150 w/ XT 57 7” OD x 4-1/4” ID X7000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XT 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 23.40 lbs
Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band X7000
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 ft-lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105257511212
1/23/04
5-7/8” 23.40 lb/ft Internal Coating V-150 w/ XT 57 7” OD x 4-1/4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XT 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 23.40 lbs
Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band TCS 8000
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 ft-lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105857511212
1/27/04
5-7/8” 23.40 lb/ft Internal Coating V-150 w/ XTM 57 7” OD x 4-1/4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XTM 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 23.40 lbs
Adjusted Weight With Tool Joint per Foot 26.68 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band TCS 8000
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 56,600 ft-lbs
Torsional Yield Strength 94,300 ft-lbs Tensile Strength 1,208,700 ft-lbs
TUBE DATA
New Premium Outside Diameter 5-1/2” 5.731”
Inside Diameter 5.153” 5.153” Wall Thickness 0.361” 0.289”
Cross Sectional Area 6.254 sq in 4.937 sq in Maximum Hook Load/Tensile Strength 938,000 lbs 740,600 lbs
Slip Crushing / Slip Type (SDXL) 724,300 lbs 575,600 lbs Burst Pressure 16,100 psi 15,100 psi
Collapse Pressure 11,400 psi 6,500 psi Torsional Yield Strength 117,200 ft-lbs 92,300 ft-lbs
Capacity W/ Tool Joint 1.059 US gal/ft 1.059 US gal/ft Displacement W/ Tool Joint 0.408 US gal/ft 0.376 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578204257411200
1/22/04
5-7/8” 26.30 lb/ft S-135 w/ XT 57 7-1/4” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection XT 57
Interchangeable With Upset Type IEU
Nominal Weight per Foot 26.30 lbs Adjusted Weight With Tool Joint per Foot 30.21 lbs
TOOL JOINT DATA
Outside Diameter 7-1/4” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Minimum Make-up Torque 34,100 ft-lbs Maximum Recommend Make-up Torque 56,900 ft-lbs
Torsional Yield Strength 94,800 ft-lbs Tensile Strength 1,208,700 lbs
TUBE DATA
New Premium Outside Diameter 5-7/8” 5.709”
Inside Diameter 5.045” 5.045” Wall Thickness 0.415” 0.332”
Cross Sectional Area 7.119 sq in 5.608 sq in Maximum Hook Load/Tensile Strength 961,000 lbs 757,100 lbs
Slip Crushing / Slip Type (SDXL) 742,100 lbs 589,000 lbs Burst Pressure 16,700 psi 15,700 psi
Collapse Pressure 14,900 psi 9,400 psi Torsional Yield Strength 117,900 ft-lbs 92,500 ft-lbs
Capacity W/ Tool Joint 1.017 US gal/ft 1.017 US gal/ft Displacement W/ Tool Joint 0.462 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105857059412
11/8/04
5-7/8” 0.500” Wall V-150 Internal Coating Landing String w/ XTM 57 7” OD x 4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XTM 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 28.67 lbs
Adjusted Weight With Tool Joint per Foot 33.43 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4” API Drift 3-15/16””
Rabbit OD, Suggested 3-13/16” Hard Band TCS 8000
Minimum Make-up Torque 48,900 ft-lbs Maximum Recommend Make-up Torque 58,700 ft-lbs
Torsional Yield Strength 97,900 ft-lbs Tensile Strength 1,403,100 lbs
TUBE DATA
New 95% Wall Outside Diameter 5-7/8” 5.825”
Inside Diameter 4.875” 4.875” Wall Thickness 0.500” 0.475”
Cross Sectional Area 8.443 sq in 7.984 sq in Maximum Hook Load/Tensile Strength 1,266,500 lbs 1,197,600 lbs
Slip Crushing / SDHL 750 Ton 927,600 lbs 879,500 lbs Slip Crushing / PS 30 750 Ton 1,015,900 lbs 962,500 lbs
Burst Pressure 22,300 psi 21,400 psi Collapse Pressure 23,200 psi 21,400 psi
Torsional Yield Strength 151,000 ft-lbs 142,600 ft-lbs Capacity W/ Tool Joint 0.951 US gal/ft 0.951 US gal/ft
Displacement W/ Tool Joint 0.516 US gal/ft 0.489 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
578105857511412
1/27/04
5-7/8” 0.500” Wall V-150 Internal Coating Landing String w/ XTM 57 7” OD x 4-1/4” ID TCS 8000 Hard Band Tool Joint
DRILL PIPE SPECIFICATIONS
Grade V-150 Connection XTM 57
Interchangeable With Internal Coating TK 34 XT
Upset Type IEU Nominal Weight per Foot 28.67 lbs
Adjusted Weight With Tool Joint per Foot 33.43 lbs
TOOL JOINT DATA Outside Diameter 7”
Inside Diameter 4-1/4” API Drift 4-1/8”
Rabbit OD, Suggested 4-1/16” Hard Band TCS 8000
Minimum Make-up Torque 33,800 ft-lbs Maximum Recommend Make-up Torque 51,600 ft-lbs
Torsional Yield Strength 86,000 ft-lbs Tensile Strength 1,208,700 ft-lbs
TUBE DATA
New 95% Wall Outside Diameter 5-7/8” 5.825”
Inside Diameter 4.875” 4.875” Wall Thickness 0.500” 0.475”
Cross Sectional Area 8.443 sq in 7.984 sq in Maximum Hook Load/Tensile Strength 1,266,500 lbs 1,197,600 lbs
Slip Crushing / SDHL 750 Ton 927,600 lbs 879,500 lbs Slip Crushing / PS 30 750 Ton 1,015,900 lbs 962,500 lbs
Burst Pressure 22,300 psi 21,400 psi Collapse Pressure 23,200 psi 21,400 psi
Torsional Yield Strength 151,000 ft-lbs 142,600 ft-lbs Capacity W/ Tool Joint 0.951 US gal/ft 0.951 US gal/ft
Displacement W/ Tool Joint 0.516 US gal/ft 0.489 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658104057079200
1/22/04
6-5/8” 25.20 lb/ft S-135 w/ 6-5/8” FH 8” OD x 5” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 6-5/8” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 25.20 lbs Adjusted Weight With Tool Joint per Foot 28.81 lbs
TOOL JOINT DATA
Outside Diameter 8” Inside Diameter 5”
API Drift 4-7/8” Rabbit OD, Suggested 4-13/16”
Minimum Make-up Torque 44,900 ft-lbs Maximum Recommend Make-up Torque 49,400 ft-lbs
Torsional Yield Strength 75,300 ft-lbs Tensile Strength 1,448,400 lbs
TUBE DATA
New Premium Outside Diameter 6-5/8” 6.493”
Inside Diameter 5.965” 5.965” Wall Thickness 0.330” 0.264”
Cross Sectional Area 6.526 sq in 5.166 sq in Maximum Hook Load/Tensile Strength 881,000 lbs 697,400 lbs
Slip Crushing / Slip Type (SDXL) 657,700 lbs 523,700 lbs Burst Pressure 11,800 psi 11,00 psi
Collapse Pressure 6,000 psi 3,400 psi Torsional Yield Strength 127,000 ft-lbs 100,400 ft-lbs
Capacity W/ Tool Joint 1.423 US gal/ft 1.423 US gal/ft Displacement W/ Tool Joint 0.441 US gal/ft 0.407 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658204057076200
1/22/04
6-5/8” 27.70 lb/ft S-135 w/ 6-5/8” FH 8” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 6-5/8” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 27.70 lbs Adjusted Weight With Tool Joint per Foot 32.51 lbs
TOOL JOINT DATA
Outside Diameter 8” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Minimum Make-up Torque 43,900 ft-lbs Maximum Recommend Make-up Torque 52,500 ft-lbs
Torsional Yield Strength 87,900 ft-lbs Tensile Strength 2,102,300 lbs
TUBE DATA
New Premium Outside Diameter 6-5/8” 6.480”
Inside Diameter 5.901” 5.901” Wall Thickness 0.362” 0.290”
Cross Sectional Area 7.123 sq in 5.632 sq in Maximum Hook Load/Tensile Strength 961,600 lbs 760,400 lbs
Slip Crushing / Slip Type (SDXL) 657,700 lbs 523,700 lbs Burst Pressure 12,900 psi 12,100 psi
Collapse Pressure 7,800 psi 4,600 psi Torsional Yield Strength 137,300 ft-lbs 108,300 ft-lbs
Capacity W/ Tool Joint 1.375 US gal/ft 1.375 US gal/ft Displacement W/ Tool Joint 0.497 US gal/ft 0.458 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658204057037200
1/22/04
6-5/8” 27.70 lb/ft S-135 w/ 6-5/8” FH 8-1/2” OD x 4-1/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 6-5/8” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 27.70 lbs Adjusted Weight With Tool Joint per Foot 32.51 lbs
TOOL JOINT DATA
Outside Diameter 8-1/2” Inside Diameter 4-1/4”
API Drift 4-1/8” Rabbit OD, Suggested 4-1/16”
Minimum Make-up Torque 54,500 ft-lbs Maximum Recommend Make-up Torque 56,000 ft-lbs
Torsional Yield Strength 109,300 ft-lbs Tensile Strength 2,102,300 lbs
TUBE DATA
New Premium Outside Diameter 6-5/8” 6.480”
Inside Diameter 5.901” 5.901” Wall Thickness 0.362” 0.290”
Cross Sectional Area 7.123 sq in 5.632 sq in Maximum Hook Load/Tensile Strength 961,600 lbs 760,400 lbs
Slip Crushing / Slip Type (SDXL) 657,700 lbs 523,700 lbs Burst Pressure 12,900 psi 12,100 psi
Collapse Pressure 7,800 psi 4,600 psi Torsional Yield Strength 137,300 ft-lbs 108,300 ft-lbs
Capacity W/ Tool Joint 1.375 US gal/ft 1.375 US gal/ft Displacement W/ Tool Joint 0.497 US gal/ft 0.458 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658203057038200
1/22/04
6-5/8” 27.70 lb/ft G-105 w/ 6-5/8” FH 8-1/2” OD x 4-3/4” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade G-105 Connection 6-5/8” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 27.70 lbs Adjusted Weight With Tool Joint per Foot 31.30 lbs
TOOL JOINT DATA
Outside Diameter 8” Inside Diameter 4-3/4”
API Drift 4-5/8” Rabbit OD, Suggested 4-9/16”
Minimum Make-up Torque 43,500 ft-lbs Maximum Recommend Make-up Torque 44,600 ft-lbs
Torsional Yield Strength 86,200 ft-lbs Tensile Strength 1,678,100 lbs
TUBE DATA
New Premium Outside Diameter 6-5/8” 6.480”
Inside Diameter 5.901” 5.901” Wall Thickness 0.362” 0.290”
Cross Sectional Area 7.123 sq in 5.632 sq in Maximum Hook Load/Tensile Strength 747,900 lbs 591,400 lbs
Slip Crushing / Slip Type (SDXL) 511,500 lbs 407,400 lbs Burst Pressure 10,000 psi 9,400 psi
Collapse Pressure 7,100 psi 4,200 psi Torsional Yield Strength 106,800 ft-lbs 85,300 ft-lbs
Capacity W/ Tool Joint 1.387 US gal/ft 1.387 US gal/ft Displacement W/ Tool Joint 0.479 US gal/ft 0.443 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658203165059200
1/22/04
6-5/8” 27.70 lb/ft S-135 w/ HT 65 8-1/4” OD x 5” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection HT 65
Interchangeable With Upset Type IEU
Nominal Weight per Foot 27.70 lbs Adjusted Weight With Tool Joint per Foot 32.04 lbs
TOOL JOINT DATA
Outside Diameter 8-1/4” Inside Diameter 5”
API Drift 4-7/8” Rabbit OD, Suggested 4-13/16”
Minimum Make-up Torque 44,600 ft-lbs Maximum Recommend Make-up Torque 60,100 ft-lbs
Torsional Yield Strength 100,200 ft-lbs Tensile Strength 1,448,400 lbs
TUBE DATA
New Premium Outside Diameter 6-5/8” 6.480”
Inside Diameter 5.901” 5.901” Wall Thickness 0.362” 0.290”
Cross Sectional Area 7.123 sq in 5.632 sq in Maximum Hook Load/Tensile Strength 961,600 lbs 760,400 lbs
Slip Crushing / Slip Type (SDXL) 657,700 lbs 523,700 lbs Burst Pressure 12,900 psi 12,100 psi
Collapse Pressure 7,800 psi 4,600 psi Torsional Yield Strength 137,300 ft-lbs 108,300 ft-lbs
Capacity W/ Tool Joint 1.390 US gal/ft 1.390 US gal/ft Displacement W/ Tool Joint 0.491 US gal/ft 0.450 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
658304057033200
1/22/04
6-5/8” 50.41 lb/ft S-135 Landing String w/ 6-5/8” FH 8-1/2” OD x 3-1/2” ID Tool Joint
DRILL PIPE SPECIFICATIONS
Grade S-135 Connection 6-5/8” FH
Interchangeable With Upset Type IEU
Nominal Weight per Foot 50.41 lbs Adjusted Weight With Tool Joint per Foot 58.74 lbs
TOOL JOINT DATA
Outside Diameter 8-1/2” Inside Diameter 3-1/2”
API Drift 3-3/8” Rabbit OD, Suggested 3-1/4”
Minimum Make-up Torque 65,000 ft-lbs Maximum Recommend Make-up Torque 71,000 ft-lbs
Torsional Yield Strength 130,200 ft-lbs Tensile Strength 2,650,100 lbs
TUBE DATA
New 95% Wall Outside Diameter 6-5/8” 6.543”
Inside Diameter 4.999” 4.999” Wall Thickness 0.813” 0.772”
Cross Sectional Area 14.845 sq in 13.996 sq in Maximum Hook Load/Tensile Strength 2,004,000 lbs 1,889,500 lbs
Slip Crushing / SDHL 750 Ton 1,410,500 lbs 1,336,300 lbs Slip Crushing / PS 30 750 Ton 1,561,300 lbs 1,477,500 lbs
Burst Pressure 29,000 psi 27,500 psi Collapse Pressure 29,100 psi 28,100 psi
Torsional Yield Strength 250,500 ft-lbs 235,400 psi Capacity W/ Tool Joint 0.981 US gal/ft 0.981 US gal/ft
Displacement W/ Tool Joint 0.908 US gal/ft 0.856 US gal/ft
Excessive heat or pulling when tube is torqued can cause the maximum pull to decrease.
Where possible all figures are obtained from OEM data source.
NOTE: Weatherford in no way assumes responsibility or liability for any loss, damage or injury resulting from the use of the information listed above. All applications are for guidelines and the data described are at the user’s own risk and are the user’s responsibility.
Recommended
