PORTABLE GRAIN DRYER
T H E M O S T T E C H N O L O G I C A L L Y
A D V A N C E D D R Y E R S O N T H E M A R K E T
W W W . F F I C O R P . C O M
G R O W T H S T R E N G T H P R O T E C T I O N C O N T R O L
P O R TA B LE G R A I N D RY E R
THE SOLUTION
To feed our growing population, farmers will need to
produce more food in the next 40 YEARS than they
have in the past 10,000 years combined. Extraordinary
challenges call for unprecedented engineering solutions.
YEAR 20409 B I L L I O N P E O P L E
T H E T E C H N O L O G I C A L L Y A D V A N C E D
PORTABLE GRAIN DRYER
P O R TA B LE G R A I N D RY E R
W H Y A F F I D R Y E R ?
CONTROL. PROTECTION. STRENGTH.
You have planned every aspect of the planting and care of your crop.
Planning for success at harvest and post-harvest should be no different.
FFI Grain Dryers give growers the CONTROL to harvest when necessary and
to moisture levels ideal for long-term storage. Being confi dent in the
PROTECTION of your properly conditioned grain allows you to
turn your attention to managing your operation, monitoring
the markets, and the overall STRENGTH of your business.
WHY CHOOSE FFI?
THE GLOBAL DEALERSHIP NETWORKFrom site analysis to complete storage system
recommendations, FFI’s worldwide dealership network
provides the agriculture industry with unparalleled exper-
tise and support.
Visit our dealer locator at http://locator.gsiag.com/ffi
to fi nd your local FFI dealer.
THE GENIUS OF FFIOur #1 concern is the quality and preservation of your grain,
a valuable asset that must be protected.
Storing, conditioning, moving, and protecting grain is a
science, and it is the foundation of our business.
That is why FFI designs and manufactures the
total grain system… not just one or two aspects.
when necessary and
d
yo
n
.
hen necessary and
dent in the
ou to
g
MODULAR TOWER DRYERWhen cooling bins are not available, dry & cool 5 point
removal capacity requirements are in the 800 to 1,690
BPH range, and the available foot print space is re-
stricted, a Modular Tower Dryer is a great selection. Wet
grain needs to be supplied at 43’ to 63’ heights which will
normally require a bucket elevator. Modular construction
makes for easier installation while standard grain invert-
ers, vacuum cooling heat recovery, and proven tower
dryer technology assures the best quality and effi ciency in
a farm series dryer.
W H I C H D R Y E R I S R I G H T F O R Y O U ?
F-SERIES TOWER DRYERWhere the largest capacity, even commercial in scale is
required, the F-Series Tower Dryer is the solution. Dry &
Cool 5 point removal capacities from 1,500 to 10,000 BPH
are provided with the same structural and grain quality,
effi ciency, and environmental performance as the
Zimmerman Tower Dryers. With diameters from 12’ to 30’
and heights from 54’ to 135’, this series gives the
highest capacity for the square footage consumed, mak-
ing the F-Series the best choice for large farm and even
most commercial site needs.
Today’s farm operations have greatly varied needs for their drying solutions. Size, type, and investment all play a part in
the decision for which to use. Fortunately, FFI provides systems of every size and type to help with those needs.
PORTABLE DRYERSOnce drying needs exceed what a bin drying system is
capable of, Portable Dryers provide higher capacities with
greater fl exibility while minimizing the investment. They
may operate either dry & cool or all heat while cooling
in properly equipped bins using LP or natural gas with
many models able to use single phase electrical supplies.
This design covers the smaller to middle capacity 5 point
removal requirements from 220 to 2,450 BPH dry & cool
and 420 to 4,000 BPH all heat. From a simple system with
grain moved with augers to a more involved system with
an overhead wet bin, drag conveyors, and bucket
elevators, FFI’s portable dryer models are the most
versatile. The low profi le of the single module dryers
work well with overhead wet bins, while the 8’-26’ basket
lengths give growers the fl exibility they need for capacity
growth. Depending on the model, FFI’s optional grain
inverters, heat recovery systems, and noise suppression
systems can further enhance effi ciency, quality, and
environmental requirements in a high percentage of
today’s growing farms.
P O R TA B LE G R A I N D RY E R
VISION START SCREEN. Fully graphic color display with large touch screen,
featuring simple, easy-to-use controls.
THE HIGHEST DEGREE IN DRYER CONTROLS
THE SCIENCE
During harvest, there is plenty com-
peting for your time and attention.
How to operate your dryer should
not be one of them. Designed with
ease-of-use in mind, operating your
FFI portable dryer has never been
easier. Unmatched options combined
with simple, easy-to-read displays
make Vision controls the very best in
grain drying.
COMMITTED TO TECHNOLOGY THAT MAKES LIFE EASIERDesigned specifi cally to control your
grain dryer, Vision features a wide
array of settings that offer unparal-
leled options and control. Boasting
a large color screen with easy-to-use
touch screen controls, the Vision can
be remote mounted, via a simple
seven wire harness, up to 1,000 feet
away from the dryer.
The Vision also puts help at your
fi ngertips when you need it most.
Owner’s manuals are available
on-demand and on-screen at the
control box.
FEATURING:• 10.4” TFT Diagonal Color Screen
(Touch Screen Control)
• 32 Bit Microprocessor Control
• Each Safety Monitored Individually
and its Status Displayed On-screen
• All Shut-downs Logged
with Time and Date
• Remote Mounted Control Box
Requires Just a Simple
Seven Wire Harness
• Safety Disconnect on Every Dryer
• Low Voltage Safety Circuit
V I S I O N D R Y E R C O N T R O L S
OPTIONAL WATCHDOG™ SOFTWAREFFI’s optional WatchDog™ System
allows remote monitoring of dryer
functions, such as moisture,
temperature, and dryer status, from
any web accessible device. This
innovative product also allows
you to make adjustments to your
dryer’s settings from your home,
the combine, or even the local
football game!
The WatchDog System can provide you information at any time during the
drying cycle
For more hands on control look no farther. WatchDog is the perfect
complement to the already innovative Vision system that is defi ning the
next generation of dryer controls.
Contact the FFI Dealer nearest you for more information.
ELECTRICALCONTROL FEATURES:• Exclusive Intertek ETL (nationally
recognized testing laboratory)
approved controls.
• Built to UL 508a and CSA C22.2
No. 14 standards, certifi ed to
US and Canadian electrical
requirements.
• IEC Branch Breakers: IEC controls
are higher quality, rated for more
cycles, and meet domestic and
international electric codes. All
dryers have branch breakers for
each motor.
• IEC Motor Overloads: IEC
overloads allow a wide range of
adjustment to accommodate
variances in incoming voltage.
• Auxiliary Auger IEC Contactors/
Overloads: Load and unload
auxiliary motor branch circuits are
standard. If load and unload horse-
power are specifi ed at time of
order, GSI will install properly sized
breaker, contactor, and overload
for customer’s application.
• Entrelec Terminals: Color-coded
Entrelec terminals are used for
all computer control circuits
connections, making for easy
installation, diagnosis and service.
• Safety Disconnect: For safely
disconnecting power from main
panel for servicing dryer controls.
Also provides an easy connection
point for incoming electric supply.
P O R TA B LE G R A I N D RY E R
CONTROL.PROTECTION.STRENGTH.
FFI’S HIGH EFFICIENCY BURNERFFI’s patent pending, high effi ciency
burners provide superior heated
air fl ow resulting in a cleaner fl ame,
increased fuel effi ciency, and most
importantly, lower operating costs.
Burner offers considerably improved
fl ame sensing. An electronic ignition
system monitors the burner and a view
window provides easy observation.
Maxon™ valves are used on all single
module units which promote better
fuel fl ow. An electronic ignition sys-
tem monitors the burner, and a view
window provides ease of observation.
Other features include an easy-to-adjust
vaporizer, a large service access door,
and an oil-fi lled gas pressure gauge.
This burner was developed in FFI’s
research and testing facility at the As-
sumption, IL plant. Airfl ow and static
pressure were exactly duplicated in
state of the art test stands with Air
Movement and Control Assoc. Int.
(AMCA) specifi cation airfl ow test cham-
bers so the testing would not be limited
to the fall drying season. Improvements
were made in effi ciency, fl ame stability,
and fl ame sensing over our previous
and other industry burner designs.
THE SCIENCE
COMPOSITE POLYMER FAN BLADESFFI Portable Dryers feature axial fans
with composite blades, which allow
for a very low starting load, leading
to easier starting and improved
effi ciency over centrifugal fans.
Composite blades also eliminate the
need to continuously rebalance the
fan. Additional benefi ts of composite
blades include high air fl ow across
a wide static pressure range, quiet
operation, and reduced energy cost.
OPTIMIZED AIRFLOW TO 80 CFM PER BU.Sized to match the basket to achieve
consistent airfl ow and capacity on
all models.
EVEN HEAT/GRAIN QUALITYHigh/Low fi re cycling helps to main-
tain a uniform plenum temperature.
14” wide columns hold the maximum
amount of grain while minimizing
the difference from the inside to the
outside of the column. Each plenum
chamber also has an air-mixing
chamber to thoroughly mix the air
and heat and to shield the grain
columns from direct contact with
the burner’s infrared waves. Multiple
heat zones in two-fan and larger
model dryers put the hottest air on
the highest moisture grain.
LOW PROFILE, FOLD-UP WET BINThe 14’6” low profi le overall height
permits easy set-up into existing in-
stallations and allows the FFI dryer to
fi t into locations other brands cannot.
The wet bin is perforated to enable
pre-heating of the grain, to increase
capacity, and to reduce operating
costs. Maximizes pre-heating of grain
at its highest point of moisture.
AIR MIXERSMixing vanes eliminate ”hot spots”
and create a more uniform plenum
temperature.
OPTIONAL ON/OFF FIREOffers a wider range of plenum
temperature control down to
5 degrees above ambient for wheat
and other temperature sensitive
circumstances.
VISION CONTROLSGlobally compliant Vision controls
offer more dryer performance
information than any control in the
industry. A large 10.4” touch-screen
helps make this the easiest to use
control on the market. Vision controls
allow users to track the dryer’s
history. All shut downs are logged
with time and date information.
D R Y I N G T E C H N O L O G Y
P O R TA B LE G R A I N D RY E R
PATENTED GRAIN INVERTERSTo promote consistent, even drying, higher test weights,
and a reduction of operating costs, be sure to add the FFI
Grain Inverters option to your stack dryer package.
Be sure to maximize the effi ciency of every FFI stack dryer
by including the optional Grain Inverters.
While more traditional grain exchangers move grain
from the inside of the grain column to the outside of the
column in 6” columns, the patented FFI Grain Inverters
move all grain, except the outer two inches, within the
column to eliminate over-dried grain and to maximize
drying effi ciency and grain quality. These patented Grain
Inverters redirect the warmest grain from the inside of the
column to be next to the wettest grain at the outside of
the column where it is dried by the captured heat which
would have otherwise escaped the dryer. (See diagram to
right for visual illustration.)
This process maintains optimal grain temperature, thus
maximizing grain quality while using less fuel and
signifi cantly reducing operating costs.
A convenient clean-out door
also provides easy access
for quick maintenance.
N D
or
D RY E R
KERNEL TEMPERATURE
Under 100° = Seed
100° to 120° = Human Food Grade (Full Nutrition and Taste)
120° to 140° = Animal Food Grade (Full Nutrition)
140° to 160° = Range where moderate damage and test weight loss starts
160° & above = Severe damage including physical breakage and severe test weight loss
Entering Drying Column
130° at Cooling Section
Plen
um 2
10°
Exha
ust
Air
Entering Drying Column
Up to 205° Entering Cooling Section
Plen
um 2
10°
Exha
ust
Air
DRYING WITH THE FFI GRAIN INVERTERS
DRYING WITHOUT THE FFI GRAIN INVERTERS
THE SCIENCE
AC METERING ROLL MOTOR WITH VFDAC Metering Motor with Variable
Frequency Drive (VFD) allows you to
set unload speed without the need
for time-consuming calibration. AC
motors are considerably more
durable and require limited
maintenance.
8” DURA-EDGE® AUGER FLIGHTINGAll augers feature the new
DURA-EDGE® 8” diameter fl ighting
with 1/4” ribbon. The DURA-EDGE®
fl ighting has an outside edge that is
30% thicker than regular fl ighting,
resulting in a longer life and in-
creased dependability.
7” DIA. METERING ROLLSVirtually eliminate material bridging
over the metering system in heavy
trash applications. The 7” diameter
metering rolls unload more evenly
over the entire width of the column
making the need for grain column
adjustments unnecessary.
REAR DISCHARGE AUTO-SHUTDOWNA 2’ discharge extension with manual
grain sampler is standard equipment.
An automatic discharge shutdown
operates off of a hinged lid switch
at the rear discharge. It is activated
when grain overfi lls the discharge
auger and forces the lid to open.
LARGEST GRAIN HOLDING CAPACITYAllows for higher bushels per hour
to consistently achieve maximum
drying. Long retention times result in
better grain quality.
G R A I N M O V E M E N T
P O R TA B LE G R A I N D RY E R
1 Level auger with DuraEdge®
fl ighting for longer life.
2 Perforated wet bin maximizes
pre-heating of grain at its
highest point of moisture.
3 Turnbuckle belt tightener for easy
tensioning and maintenance.
4 Air mixing chambers thoroughly
mix heat and air before it enters
the drying chamber.
5 High effi ciency burners with
improved fl ame sensing.
6 Industrial grade IEC rated
contactors, breakers and
overloads insure durability and
quality while the provided load
and unload auxiliary contactors
help reduce installation costs.
7 Composite polymer fan blades
offer industry best performance in
airfl ow to electrical consumption.
8 Non-service rated safety discon-
nect circuit breaker integrated into
door handle for safe, economical
installation and maintenance.
9 Vision controls touch-screen
display, for easier operation.
10 7” dia. meter rolls unload more
evenly over the entire width of the
column making the need for grain
column adjustments unnecessary.
11 AC Meter roll with Variable
Frequency Drive (VFD) allows
material to fl ow easily resulting
in less clogging.
12 Auger with DuraEdge® fl ighting
for longer life.
2
13
46
5 7
8
9
1011
12
THE SCIENCE
E A S E O F M A I N T E N A N C E & T O U C H P O I N T S
IMPROVEDLADDER DESIGNRedesigned standard ladder package
for portable dryers to meet OSHA
specifi cations. FFI ladders feature
heavy-duty construction and slip-
resistant patterns to give extra grip
in wet conditions. Stacked dryers
include platform.
CLEAN-OUT MADE EASYInside metering and unload auger
access panels lift freely out of the
way to accommodate service and
maintenance. External cleanout
doors positioned in each grain
column offer quick and easy unload-
ing of the dryer if needed. Also, an
extra wide rear access door and
12” cleanout doors assists in
seasonal clean out of the dryer.
THREE-PIECE SIDEWALL SCREENSFFI’s three-piece sidewall panels
allow the top angle section alone,
the top angle and side sections, or
all of the exterior screens including
the bottom angle section to
optionally be stainless steel. This
allows for economical protection
against rust and corrosion where
needed, based on the size of dryer
and type of usage. All fastening
hardware is also stainless steel to
eliminate future corrosion.
NOISE SUPPRESSORFFI’s standard low speed 1725 rpm
blades make FFI axial fan dryers much
quieter than in the past at a level that
OSHA allows for continuous 6 hour
exposure 15’ away. Though most situa-
tions do not require the Noise Sup-
pression System those that want their
dryer to be ultra quiet, even quieter
than the competitive centrifugal fan
models, the system will reduce the
noise level at 15’ to one-fourth the
OSHA 8 hour exposure limit. System
can be integrated with Heat Reclaimer.
HEAT RECLAIMEROn multi-fan dryers, reduces the
amount of heat lost when operating in
Dry & Cool mode to the atmosphere
and recycles it, thereby reducing fuel
consumption and lowering operating
costs by up to 30%. Open ductwork
is optimally sized for 0% capacity loss
as it prevents accumulation of fi ne
material. Sized to reduce air velocity
very little chaff or air debris is pulled
into the dryer. Heat Reclaimer can be
integrated with Noise Suppressor
P O R TA B LE G R A I N D RY E R
CF/AB SERIES
THE SPECIFICATIONS
CFAB190 CFAB270 CFAB320 CFAB370 CFAB400 CFAB460 CFAB511 CFAB601 CFAB510 CFAB600Grain Column Length 8’ 12’ 14’ 16’ 18’ 20’ 22’ 26’ 22’ 26’
DIMENSIONS - INCLUDES LOW PROFILE FOLD UP WET BINTransport Length 17’2” 21’2” 23’2” 25’2” 27’2” 29’2” 31’2” 35’2” 31’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5”
Transport Weight (approx.)(Less Transport Kit)
5,200 lbs. 6,300 lbs. 7,000 lbs. 7,500 lbs. 8,000 lbs. 8,700 lbs. 9,500 lbs. 11,000 lbs. 9,800 lbs. 11,300 lbs.
Installed Length 17’2” 19’2” 21’2” 23’2” 25’2” 27’2” 29’2” 33’2” 29’2” 33’2”
Installed Width 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’
Installed Height 14’5” 14’5” 14’5” 14’5” 14’5” 14’5” 14’5” 14’5” 14’5” 14’5”
FAN(S) 1 1 1 1 1 1 1 1 2 2
36”, 15HP1750 RPM
36”, 15HP1750 RPM
40”, 15HP1750 RPM
40”, 15HP1750 RPM
42”, 20HP1750 RPM
42”, 25HP1750 RPM
42”, 30HP1750 RPM
42”, 40HP1750 RPM
36”, 15HP1750 RPM
40”, 25HP 1750 RPM
36”, 15HP1750 RPM
40”, 25HP1750 RPM
HEATER(S) 1 1 1 1 1 1 1 1 2 2
BTU/HR(MM) 4.6 4.6 5.8 5.8 6.8 7.5 8.8 10.34.6 6.75
4.6 6.75
AUGERSTop Auger (HP/BPH) 2HP/3800 2HP/3800 3HP/3800 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800
Bottom Auger (HP/BPH) 2HP/3800 2HP/3800 3HP/3800 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800
Metering Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,125 BPH 1,680 BPH 1,960 BPH 2,240 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH 3,080 BPH 3,640 BPH
ELECTRIC LOAD (FAN, LOAD AUGER, UNLOAD AUGER)4
1PH, 230V - Min/Max Amps 106/161 106/161 109/164 124/179 NA NA NA NA 211/266 NA
3PH, 208V - Min/Max Amps 58/96 58/96 64/115 77/127 88/138 128/193 128/204 167/244 131/208 196/273
3PH, 230V - Min/Max Amps 54/89 54/89 60/108 71/120 81/130 117/178 117/188 157/228 121/192 183/254
3PH, 460V - Min/Max Amps 30/44 30/44 32/54 38/60 43/65 61/89 61/94 81/114 63/96 94/127
3PH, 575V - Min/Max Amps 26/37 26/37 28/45 33/50 36/54 50/73 50/77 67/94 54/81 77/104
DRYING CAPACITY (BPH), SHELLED CORN1
Dry & Cool 25% to 15%5 160 BPH 200 BPH 240 BPH 270 BPH 310 BPH 350 BPH 380 BPH 450 BPH 430 BPH 530 BPH
Dry & Cool 20% to 15%5 210 BPH 260 BPH 310 BPH 360 BPH 420 BPH 470 BPH 500 BPH 590 BPH 565 BPH 700 BPH
Full Heat 30% to 15%2 180 BPH 240 BPH 290 BPH 310 BPH 370 BPH 400 BPH 450 BPH 520 BPH 495 BPH 620 BPH
Full Heat 25% to 15%2 250 BPH 330 BPH 380 BPH 430 BPH 490 BPH 540 BPH 590 BPH 700 BPH 670 BPH 820 BPH
Full Heat 20% to 15%2 410 BPH 510 BPH 590 BPH 690 BPH 800 BPH 890 BPH 970 BPH 1,130 BPH 1,080 BPH 1,330 BPH
Holding Capacity (Total) 215 BU 321 BU 374 BU 428 BU 481 BU 534 BU 588 BU 695 BU 588 BU 695 BU
Holding Capacity (Column) 186 BU 276 BU 322 BU 368 BU 414 BU 460 BU 506 BU 598 BU 506 BU 598 BU
1 Capacities listed are wet bushels/tonnes, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.5 Dry & Cool rates running in Batch mode.
C2100A SERIES
THE SPECIFICATIONS
C2120A C2122A C2125A C2130A C2132A C2140AGrain Column Length 14’ 16’ 18’ 20’ 22’ 26’
DIMENSIONS - INCLUDES LOW PROFILE FOLD UP WET BINTransport Length 23’ - 1.5” 23’ - 1.5” 27’ - 1.5” 28’ - 1.5” 30’ - 1.5” 35’ - 1.5”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” 13’5” 13’5” 13’5” 13’5” 13’5”
Transport Weight (approx.)(Less Transport Kit)
7,600 lbs. 8,200 lbs. 9,000 lbs. 9,800 lbs. 10,500 lbs. 12,000 lbs.
Installed Length 21’ 23’ 25’ 27’ 29’ 33’
Installed Width 8’ 8’ 8’ 8’ 8’ 8’
Installed Height 14’6” 14’6” 14’6” 14’6” 14’6” 14’6”
FAN(S) 2 2 2 2 2 2
Top Fan36”, 15HP1750 RPM
36”, 15HP1750 RPM
36”, 15HP1750 RPM
40”, 15HP1750 RPM
42”, 20HP1750 RPM
42”, 25HP1750 RPM
Bottom Fan28”, 10HP1750 RPM
28”, 10HP1750 RPM
28”, 10HP1750 RPM
28”, 13HP1750 RPM
28”, 13HP1750 RPM
28”, 13HP1750 RPM
HEATER(S) 2 2 2 2 2 2Top BTU/HR(MM) 4.6 4.6 4.6 5.8 6.8 7.5
Bottom BTU/HR(MM) 2.3 2.3 2.3 3 3 3
AUGERSTop Auger (HP/BPH) 5HP/3800 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800
Bottom Auger (HP/BPH) 5HP/3800 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800
Metering Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,960 BPH 2,240 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH
ELECTRIC LOAD (FAN, LOAD AUGER, UNLOAD AUGER)4
1PH, 230V - Min/Max Amps 157/212 177/232 177/232 191/246 NA NA
3PH, 208V - Min/Max Amps 112/162 112/162 112/162 125/202 136/213 164/240
3PH, 230V - Min/Max Amps 99/148 104/153 104/153 116/187 126/197 154/225
3PH, 460V - Min/Max Amps 52/74 55/76 55/76 61/93 66/98 80/112
3PH, 575V - Min/Max Amps 48/66 49/66 49/66 54/81 57/84 68/95
DRYING CAPACITY (BPH), SHELLED CORN1
Dry and Cool 25% to 15% 240 BPH 280 BPH 310 BPH 340 BPH 390 BPH 440 BPH
Dry and Cool 20% to 15% 390 BPH 460 BPH 490 BPH 540 BPH 620 BPH 710 BPH
Full Heat 30% to 15%2 320 BPH 370 BPH 400 BPH 420 BPH 470 BPH 520 BPH
Full Heat 25% to 15%2 410 BPH 470 BPH 500 BPH 570 BPH 630 BPH 710 BPH
Full Heat 20% to 15%2 660 BPH 750 BPH 820 BPH 930 BPH 1,030 BPH 1,150 BPH
Holding Capacity (Total) 374 BU 428 BU 481 BU 534 BU 588 BU 695 BU
Holding Capacity (Column) 322 BU 368 BU 414 BU 460 BU 506 BU 598 BU
1 Capacities listed are wet bushels/tonnes, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.
P O R TA B LE G R A I N D RY E R
C2001 SERIES / CMS-H & M SERIES
THE SPECIFICATIONS
1 Capacities listed are wet bushels/tonnes, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.5 Dry & Cool rates running in Batch mode.* Limited by Meter Roll maximum capacity.
CF2141 CF2181 CMS500H CF2221 CMS650M CMS1000H CMS1300M CMS1500H CMS2000MGrain Column Length 14’ 18’ 20’ 22’ 26’ 20’ 26’ 20’ 26’DIMENSIONS - INCLUDES LOW PROFILE FOLD UP WET BINTransport Length 23’2” 27’2” 29’2” 31’2” 35’-1.5” 29’2” 35’-1.5” 29’2” 35’-1.5”Transport Width 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’Transport Height3 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5” 13’5”Transport Weight (approx.)(Less Transport Kit)
9,500 lbs. 11,500 lbs. 14,500 lbs. 15,500 lbs. 18,500 lbs. 21,600 lbs. 26,100 lbs. 31,100 lbs. 38,100 lbs.
Installed Length 21’2” 25’2” 27’ 30’2” 35’10” 29’-10.5” 35’10” 29’-10.5” 35’10”Installed Width 8’8” 8’8” 8’8” 8’8” 8’8” 8’8” 8’8” 8’8” 8’8”Installed Height 15’10” 15’10” 15’10” 15’10” 15’10” 27’2” 27’2” 38’6” 38’6”FAN(S) 2 2 2 2 2 4 4 6 6
28”10-12 HP1750 RPM
36”10-12 HP 1750 RPM
36”10-16HP
1750 RPM
36”15 HP 1750
RPM
40”25HP
1750 RPM
36”10-16HP
1750 RPM
40”25HP
1750 RPM
36”10-16HP
1750 RPM
40”25HP
1750 RPMHEATER(S) 2 2 2 2 2 4 4 6 6BTU/HR(MM) 3 3 9.2 4.5 12 18.4 24 27.6 36AUGERSTop Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800Bottom Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800 7.5HP/3800 10HP/3800Metering Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HPMaximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH 2,800 BPH 3,640 BPH 2,800 BPH 3,640 BPHELECTRIC LOAD (FAN, LOAD AUGER, UNLOAD AUGER)4
1PH, 230V - Min/Max Amps 157/212 157/212 211/266 211/266 NA 359/421 NA NA NA3PH, 208V - Min/Max Amps 106/156 106/144 131/208 131/208 196/273 213/290 331/408 295/372 466/5433PH, 230V - Min/Max Amps 99/148 99/134 121/192 121/192 183/254 197/268 307/378 273/344 431/5023PH, 460V - Min/Max Amps 52/74 52/68 63/96 63/96 94/127 101/134 156/189 139/172 218/2513PH, 575V - Min/Max Amps 48/66 48/66 54/81 54/81 77/104 86/113 125/152 119/146 174/201DRYING CAPACITY (BPH), SHELLED CORN1
Dry & Cool 25% to 15%5 250 BPH 340 BPH 390 BPH 420 BPH 520 BPH 840 BPH 1,110 BPH 1,110 BPH 1,500 BPHDry & Cool 20% to 15%5 350 BPH 440 BPH 500 BPH 550 BPH 680 BPH 1,360 BPH 1,810 BPH 1,780 BPH 2,430 BPHFull Heat 30% to 15%2 290 BPH 380 BPH 440 BPH 480 BPH 600 BPH 910 BPH 1,180 BPH 1,390 BPH 1,800 BPHFull Heat 25% to 15%2 440 BPH 520 BPH 600 BPH 650 BPH 800 BPH 1,230 BPH 1,640 BPH 1,810 BPH 2,460 BPHFull Heat 20% to 15%2 710 BPH 840 BPH 970 BPH 1,050 BPH 1,300 BPH 1,980 BPH 2,660 BPH 2,920 BPH* 3,960 BPH*Holding Capacity (Total) 374 BU 481 BU 534 BU 588 BU 695 BU 1,034 BU 1,291 BU 1,524 BU 1,982 BUHolding Capacity (Column) 322 BU 414 BU 460 BU 506 BU 598 BU 960 BU 1,248 BU 1,450 BU 1,885 BU
CMS3002 SERIES
THE SPECIFICATIONS
CMS3142 CMS3182 CMS3202 CMS3222 CMS3262Grain Column Length 14’ 18’ 20’ 22’ 26’
DIMENSIONS - INCLUDES LOW PROFILE FOLD UP WET BINTransport Length 23’2” 27’2” 29’2” 31’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” 13’5” 13’5” 13’5” 13’5”
Transport Weight (approx.)(Less Transport Kit)
16,000 lbs. 19,000 lbs. 21,000 lbs. 22,500 lbs. 25,000 lbs.
Installed Length 23’10” 27’10” 29’10” 31’10” 35’10”
Installed Width 8’8” 8’8” 8’8” 8’8” 8’8”
Installed Height 25’11” 25’11” 25’11” 25’11” 25’11”
FAN(S) 3 3 3 3 3
Top Module40”, 15HP1750 RPM
42”, 20HP1750 RPM
42”, 25HP1750 RPM
42”, 30HP1750 RPM
42”, 40HP1750 RPM
Bottom Module28”, 12HP(2)
1750 RPM36”, 12HP(2)
1750 RPM36”, 15HP(2)
1750 RPM36”, 15HP(2)
1750 RPM40”, 25HP(2)
1750 RPM
HEATER(S) 3 3 3 3 3Top BTU/HR(MM) 5.5 6.8 7.5 8.8 10.8
Bottom BTU/HR(MM) 6 7 9 9 13.5
AUGERSTop Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800
Bottom Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800
Metering Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH
ELECTRIC LOAD (FAN, LOAD AUGER, UNLOAD AUGER)4
1PH, 230V - Min/Max Amps 230/285 NA NA NA NA
3PH, 208V - Min/Max Amps 147/197 158/208 199/275 199/275 302/379
3PH, 230V - Min/Max Amps 137/186 135/184 183/254 183/254 281/352
3PH, 460V - Min/Max Amps 71/93 70/92 94/127 99/132 143/176
3PH, 575V - Min/Max Amps 65/82 68/86 78/105 82/109 115/142
DRYING CAPACITY (BPH), SHELLED CORN1
Dry & Cool 25% to 15% 610 BPH 760 BPH 840 BPH 920 BPH 1,110 BPH
Dry & Cool 20% to 15% 990 BPH 1,220 BPH 1,360 BPH 1,480 BPH 1,810 BPH
Full Heat 30% to 15%2 660 BPH 820 BPH 910 BPH 990 BPH 1,180 BPH
Full Heat 25% to 15%2 890 BPH 1,100 BPH 1,230 BPH 1,340 BPH 1,640 BPH
Full Heat 20% to 15%2 1,440 BPH 1,780 BPH 1,980 BPH 2,170 BPH 2,660 BPH
Holding Capacity (Total) 724 BU 931 BU 1,034 BU 1,138 BU 1,291 BU
Holding Capacity (Column) 672 BU 864 BU 960 BU 1,056 BU 1,248 BU
1 Capacities listed are wet bushels/tonnes, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.
P O R TA B LE G R A I N D RY E R
CMS4003 SERIES
THE SPECIFICATIONS
CMS4143 CMS4183 CMS4203 CMS4223 CMS4263Grain Column Length 14’ 18’ 20’ 22’ 26’DIMENSIONS - INCLUDES LOW PROFILE FOLD UP WET BINTransport Length 23’2” 27’2” 29’2” 31’2” 35’2”Transport Width 8’ 8’ 8’ 8’ 8’Transport Height3 13’5” 13’5” 13’5” 13’5” 13’5”Transport Weight (approx.)(Less Transport Kit)
23,000 lbs. 26,500 lbs. 29,500 lbs. 30,500 lbs. 35,000 lbs.
Installed Length 23’10” 27’10” 29’10” 31’10” 35’10”Installed Width 8’8” 8’8” 8’8” 8’8” 8’8”Installed Height 37’3” 37’3” 37’3” 37’3” 37’3”FAN(S) 4 4 4 4 4
Top & Middle Modules40”, 15HP1750 RPM
42”, 20HP1750 RPM
42”, 25HP1750 RPM
42”, 30HP1750 RPM
42”, 40HP1750 RPM
Bottom Module28”, 10-12HP(2)
1750RPM36”, 10-12HP(2)
1750RPM36”, 15HP(2)
1750RPM36”, 15HP(2)
1750RPM40”, 25HP(2)
1750RPMHEATER(S 4 4 4 4 4Top & Middle BTU/HR(MM) 11 13.5 15 17.5 20.5Bottom BTU/HR(MM) 6 7 9 9 13.5AUGERSTop Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800Bottom Auger (HP/BPH) 5HP/3800 5HP/3800 7.5HP/3800 7.5HP/3800 10HP/3800Metering Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HPMaximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPHELECTRIC LOAD (FAN, LOAD AUGER, UNLOAD AUGER)4
1PH, 230V - Min/Max Amps 303/358 NA NA NA NA3PH, 208V - Min/Max Amps 188/238 210/260 266/343 266/343 300/3773PH, 230V - Min/Max Amps 175/224 183/232 245/316 245/316 279/3503PH, 460V - Min/Max Amps 90/112 94/116 125/158 135/168 192/2253PH, 575V - Min/Max Amps 81/98 88/106 103/130 111/138 154/181DRYING CAPACITY (BPH), SHELLED CORN1
Dry & Cool 25% to 15% 830 BPH 1,030 BPH 1,110 BPH 1,240 BPH 1,500 BPHDry & Cool 20% to 15% 1,330 BPH 1,650 BPH 1,780 BPH 2,000 BPH 2,430 BPHFull Heat 30% to 15%2 990 BPH 1,240 BPH 1,390 BPH 1,490 BPH 1,800 BPHFull Heat 25% to 15%2 1,350 BPH 1,660 BPH 1,810 BPH 2,020 BPH 2,460 BPHFull Heat 20% to 15%2 2,170 BPH 2,690 BPH 2,920 BPH* 3,270 BPH* 3,960 BPH*Holding Capacity (Total) 1,067 BU 1,372 BU 1,524 BU 1,677 BU 1,982 BUHolding Capacity (Column) 1,015 BU 1,305 BU 1,450 BU 1,595 BU 1,885 BU
1 Capacities listed are wet bushels/tonnes, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.* Limited by Meter Roll maximum capacity.
* Measured in wet bushels per hour (BPH)1 Limited by Meter Roll maximum capacity.2 Dry & Cool rates running in Batch mode.
X-STREAM™PORTABLE DRYERCarrying on FFI’s proud history of
innovation in grain drying, the
X-Stream dryer features fans and
heaters mounted in a staggered
confi guration on opposite ends of
the dryer.
Independent university testing docu-
mented signifi cant savings from the
X-Stream design. By mounting the
fans and heaters on opposite ends of
the dryer and staggering each fan, the
X-Stream delivers more uniform heat
throughout the entire dryer, regard-
less of column location. As grain pass-
es through the X-Stream, it is exposed
to more consistent levels of heat. The
result is a higher quality grain that is
more evenly dried at a lower cost.
The X-Stream dryer’s exclusive
mixing chambers blend heated
drying air for the most even drying,
eliminating front-to-back moisture
variation and heat loss, resulting in
higher effi ciency drying.
X-Stream dryers have been fi eld-
tested and proven in FFI pistachio
food grade dryers. In this stringent
market, with an extraordinarily
expensive product, even drying is
the difference between profi table
pistachios that can be sold for human
consumption versus those that are
simply thrown out or downgraded to
animal feed.
FFI strongly recommends adding
optional patented Grain Inverters to
the X-Stream dryer for greater perfor-
mance improvement. Grain Inverters
and the X-Stream stack dryer design
combine to dry grain evenly from front
to back and across the entire column
without the loss of usable heat.
Vision controls are standard on
X-Stream dryers.
AVAILABLE FOR CMS-H, CMS-M, CMS-3002, AND
CMS-4003 SERIES DRYERS
X-STREAM SERIES
THE SPECIFICATIONS
CMS500HX CMS650MX CMS3202X CMS3222X CMS3262X CMS1000HX CMS1300MX CMS4203X CMS4223X CMS4263X CMS1500HX CMS2000MXSTACKABLEModules 1 1 2 2 2 2 2 3 3 3 3 3Fans 2 2 3 3 3 4 4 4 4 4 6 6ELECTRICALPhase 1 or 3 1 or 3 3 3 3 1 or 3 3 3 3 3 3 3Voltage ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALLFuel LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NGDryer Wt. 14,500 lbs. 18,500 lbs. 21,000 lbs. 22,500 lbs. 25,000 lbs. 21,600 lbs. 26,100 lbs. 29,500 lbs. 30,500 lbs. 35,000 lbs. 31,100 lbs. 38,100 lbs.WET BUSHELS FULL HEAT10 pt.* 25%-15% 615 BPH 820 BPH 1,245 BPH 1,355 BPH 1,670 BPH 1,245 BPH 1,670 BPH 1,825 BPH 2,040 BPH 2,475 BPH 1,825 BPH 2,475 BPH5 pt.* 20%-15% 990 BPH 1,330 BPH 2,010 BPH 2,195 BPH 2,700 BPH 2,010 BPH 2,700 BPH 2,950 BPH1 3,300 BPH1 4,000 BPH1 2,950 BPH1 4,000 BPH1
WET BUSHELS DRY & COOL10 pt.* 25%-15% 395 BPH2 530 BPH2 850 BPH 930 BPH 1,130 BPH 850 BPH 1,130 BPH 1,120 BPH 1,250 BPH 1,520 BPH 1,120 BPH 1,520 BPH5 pt.* 20%-15% 520 BPH2 700 BPH2 1,375 BPH 1,500 BPH 1,835 BPH 1,375 BPH 1,835 BPH 1,800 BPH 2,015 BPH 2,445 BPH 1,800 BPH 2,445 BPH
FFI is a member of the GSI family of brands.
Copyright ©2013 All rights reserved.GSI reserves the right to change designs and specifi cations without notice.
FF-020c JUL/13
W W W. F F I C O R P. C O M