MTS-5100 Optical Time Domain Reflectometer (OTDR)for installation and maintenance of fiber networks
Key Features
Advanced modular tester for high precision FTTx testing
The unique JDSU MTS-5100 is a fiber tester with a range of plug-in modulesproviding a comprehensive, integrated solution for OTDR and power meters withtalk set option testing in one field-rugged instrument. Powerful, easy to use andhighly cost-effective, MTS-5100 is designed to push the boundaries of field testproductivity for network installers, operators and maintenance teams.
A wide range of field-interchangeable modules are available for the MTS-5100platform, including OTDRs for multimode (MM), very short haul/FTTx (VSR),short range (SRe), medium haul (DR), long haul (HD), very long haul (VHD),and 1625 nm, visual fault locator, and a range of light sources and power meterswith talk set option.
JDSU’s optical time domain reflectometer (OTDR) and loss test (LTS) plug-inmodules are compact, yet powerful additions to the MTS-5100 family of testers.
The MTS-5100 offers the industry’s fastest, highest performance solutions of anyOTDR field instrument on the market. Both the OTDR and LTS modules deliverhigh accuracy, cost effective, reliable testing for the installation and maintenanceof FTTx networks.
• Wide range of OTDR and OLTS modules covering every application with two fast field interchangeable slots for modules
• The ONLY platform highly visible in bright sunlight, this NEW high visibility screen option means the MTS-5100 can be used in any lighting condition
• From LAN (1.5 m event dead zone) to very long haul applications (44 dB dynamic range)
• High performance testing (up to 128,000 acquisition points with 0.1 s real-time sweep)
• Maximum portability (3.5 kg) and up to 16 hours battery operation (Telcordia GR196)
• A complete range of PC software to enhance your OTDR reporting capabilities reducing cable acceptance reporting by up to 70%
Key Features
WEBSITE: www.jdsu.com
ACTERNA TEST & MEASUREMENT SOLUTIONS
With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany
Wavetek MTS-5100e 5026HD SpecsProvided by www.AAATesters.com
The MTS-5100 OTDR is the fastest, most
reliable and accurate OTDR on the market.Together, the module’s automation and rapid testing features offer impressivetime savings for companies involved in commissioning and locating faults inFTTx networks.
Maximizing field productivityThe most important prerequisites for testing in the field are ease-of-use and speedof acquisition. The OTDR module ensures maximum test productivity byproviding one-button, automated operation for all of its critical test routines anda very high data acquisition speed of 40 dB in seconds.
Delivering the industry’s highest performance OTDRThe MTS-5100 OTDR module is the fastest and most accurate OTDR to-date. Itoffers a dynamic range of up to 44 dB at 1550 nm and boasts a 0.1 second sweeptime. As part of the MTS-5100, the OTDR module has a test capability of morethan 200 km and can measure up to 128,000 separate data points with 4 cmsampling resolution. The product’s short deadzone enables the user todifferentiate events down to 1 meter.
Optimized functions for in-depth analysis/operationThe OTDR’s bidirectional analysis capability enables true splice loss measurementwith both end traces.Its multiple trace management feature greatly assists theprocess of proactively managing fiber problems and helps compare differentcurrent and stored measurements for in-depth analysis. A powerful macrofunction enables users to perform a series of tests without ongoing userintervention.
Suitable for every skill levelWhatever the user’s skill level, the OTDR module and MTS-5100 instrumentcombination can rise to the challenge. Direct access keys ensure that users canaccess all the instrument’s sophisticated features via a highly intuitive interfaceand by a comprehensive set up and results screen. The OTDR module deliverscomplete trace analysis, with a direct link between trace and table.
Enhanced reporting powerPowerful instruments require powerful reporting tools. The OTDR and loss testset come with the most complete analysis and reporting software.
The package supports direct Ethernet transfer to a PC running JDSU’s OFS 100Optical Fiber Trace Software or OFS-200 Optical Fiber Cable Software. Thisenables users to perform automatic multiple trace analysis and print out cable testresults in batches, for fast generation of dedicated acceptance reports.
2
MTS-5100 OTDR
Multiple wavelength display with a single press of
a button
Bidirectional trace and table
Technical specifications
Base unit (typical at 25 °C)
Display
Passive color, 7.8 inches LCD 640 x 480
Active TFT color, 8.4 inches LCD 640 x 480
Languages
English, French, German, Spanish, Portuguese, Italian, Chinese,
Taiwanese, Russian, Korean, Japanese,Turkish
Weight
MTS-5100 3.5 kg (7.7 lb) including
1 module and 1 battery
Size
MTS-5100 300 x 235 x 90 mm
11.8 x 9.25 x 3.5 in
Input/Output
MTS-5100 RS-232-C, Centronics interface,
external keyboard (optional),
Ethernet interface (optional)
Power supply
AC or internal removable NiMH batteries
Operation time up to 16 hours with 2 batteries
(Bellcore GR-196)
Internal charger Yes (external charger available)
Charging time < 3 hours per battery
DC input 11 to 14 V
AC adapter
MTS-5100 Input 100-250 V, 50-60 Hz,
1.6 A, Output 12 V DC / 4.2 A
Results display dBm, dBr, nW, μW, mW
Temperature range
Operating AC Power (no options)
–20 °C to 50 °C (–4 °F to +122 °F)
Operating with all options 0 °C to 40 °C (+32 °F to +104 °F)
Storage –20 °C to 60 °C (–4 °F to +140 °F)
Humidity 95% without condensing
EMI/ESD CE compliant
3
MTS-5100 OTDR
OTDR characteristics
Distance units
Kilometers, feet and miles
Group index range
1.30000 to 1.70000 nm in 0.00001 steps
Number of data points
Up to 128 000 data points
Distance measurements
Automatic or dual cursor
Display span From 2.6 m up to maximum range
(380 km for HD and VHD modules)
Display resolution 1 cm
Cursor resolution From 1 cm
Sampling resolution From 4 cm
Accuracy ± 1 m ± sampling resolution
± 1.10-5 x distance
(excluding group index uncertainties)
Attenuation measurement
Automatic, manual, 2-point, 5-point and LSA
Display span From 1.25 dB to 55 dB
Display resolution 0.001 dB
Cursor resolution From 0.001 dB
Accuracy ± 0.05 dB ± 0.05 dB/dB
Threshold 0.01 to 5.99 dB in 0.01 dB step
Reflectance/ORL measurements
Automatic or manual
Display resolution 0.01 dB
Threshold -11 to -99 dB in 1 dB step
Storage Bellcore/Telcordia compatible
Version 1.1 and Version 2.0
Internal memory 400 traces typical in
internal memory
Floppy disk drive 3.5 inches,
MS DOS compatible (optional)
With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany
4
MTS-5100 OTDR
OTDR module technical specifications (typical at 25°C)
Feature Description
Multimode modules Very short range Short range Medium range Long range Very long range
MM modules VSR modules SRe modules DR modules HD modules VHD
Central wavelength (1) 850/1300 nm 1310/1550 nm 1310/1550 nm 1310/1550 nm 1310/1550/1625 nm 1310/1550/1625 nm
± 20 nm ± 20 nm ± 20 nm ± 20 nm ± 20 nm ± 20 nm
Laser safety class (21 CFR) Class 1 Class 1 Class 1 Class 1 Class 1 Class 1
Pulse width 3 ns to 200 ns 10 ns to 10 μs 10 ns to 10 μs 5 ns to 10 μs 10 ns to 20 μs 10 ns to 20 μs
Distance range Up to 80 km Up to 260 km Up to 260 km Up to 260 km Up to 380 km Up to 380 km
RMS dynamic range (2) 25 dB/23 dB 31 dB/29 dB 34 dB/32 dB 37 dB/35 dB 42 dB/40 dB/40 dB 44 dB/44 dB/44 dB
Event dead zone (3) 1.5 m 3 m 3 m 1 m 4 m 6 m
Attenuation dead zone (4) 5 m 25 m 25 m 8 m 15 m 20 m
VFL option for OTDR module 635 nm ± 15 nm 635 nm ± 15 nm 635 nm ± 15 nm 635 nm ± 15 nm 635 nm ± 15 nm 635 nm ± 15 nm
Class 2, 21 CFR Class 2, 21 CFR Class 2, 21 CFR Class 2, 21 CFR Class 2, 21 CFR Class 2, 21 CFR
(1) Central wavelength: Laser at 25°C and measured at 10 μs for singlemode and 50 ns for multimode(2) RMS dynamic range: The one way difference between the extrapolated backscattering level at the start of the fiber and the RMS noise level, after 3 minutes averaging.(3) Event dead zone: Measured at ± 1.5 dB down from the peak of an unsaturated reflective event.(4) Attenuation dead zone: Measured at ± 0.5 dB from the linear regression using a FC/PC type reflectance.
LTS module technical specifications (typical at 25°C)
Feature Power meter
Multimode modules MM
Type of sensor InGaAs
Spectral range From 800 to 1650 nm in 1 nm step
Calibrated wavelength 850 nm, 1310 nm, 1550 nm
Accuracy ± 0.2 dB
Resolution 0.01 dBm/0.01 nW
Measurement range +5 dBm to -65 dBm at 850 nm
+5 dBm to -70 dBm at 1310/1550 nm
+25 dBm to -50 dBm at 1310/1550 nm with adapter/attenuator
Results display dBm, dBr, nW, μW, mW
Tone detection 270 Hz, 330 Hz, 1 kHz, 2 kHz for fiber identification
Features Singlemode light source Multimode light source
Calibrated wavelength 1300/1550 nm ± 30 nm 850 nm ± 30 nm 1300 nm ± 30 nm
Spectral width <5 nm 50 nm 150 nm
Stability (1 hour) ± 0.05 dB ± 0.05 dB
Stability (24 hours) ± 0.15 dB ± 0.15 dB
Calibrated output power 0 dBm -17 (850), -19 (1300) or -18/20 dBm
Modulation 270 Hz, 330 Hz, 1 kHz, 2 kHz for fiber identification 270 Hz, 330 Hz, 1 kHz, 2 kHz for fiber identification
Feature Dynamic range
Talk Set option 35 dB
NORTH AMERICA
TOLL FREE: 1 866 228 3762
FAX: +1 301 353 9216
All statements, technical information and recommendations related to the products herein are based upon informa-
tion believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no
responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with
the use of a product or its application. JDSU reserves the right to change at any time without notice the design,
specifications, function, fit or form of its products described herein, including withdrawal at any time of a product
offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual
property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of
JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase
Corporation. All rights reserved. 10143188 500 1005 MTS5100OTDR.DS.FOP.TM.AE
Test & Measurement Regional Sales
LATIN AMERICA
TEL: +55 11 5503 3800
FAX: +55 11 5505 1598
ASIA PACIFIC
TEL: +852 2892 0990
FAX: +852 2892 0770
EMEA
TEL: +49 7121 86 2222
FAX: +49 7121 86 1222
WEBSITE: www.jdsu.com
MTS-5100 OTDR
Ordering information
Base instrument options
Base unit with floppy disk drive and color display E5100OTDR
Base unit with floppy disk and high visibility screen E5100OTDRH
Hard disk drive E5000Hdisk
Ethernet option E5000Eth
Main OTDR modules
(single and dual wavelength versions available)
Multimode 850/1300 nm Module E5023 MM
Singlemode 1310/1550 nm Module E5026 VSR
Short Range Singlemode 1310/1550 nm Module E5026 SRe
Medium Range/High Resolution Singlemode 1310/1550 nm Module E5026 DR
Long Range Singlemode 1310/1550 nm Module E5026 HD
Long Range Singlemode 1625 nm Module E5027 HD
Long Range Singlemode 1310/1550/1625 nm Module E5036 HD
Very Long Range 44 dB 1310/1550 nm Module E5026 VHD
Very Long Range 44 dB 1625 nm Module E5027 VHD
Very Long Range 44 dB 1550/1625 nm Module E5029 VHD
VFL Option for OTDR module E502X VUPP
Main LTS modules
(single and dual wavelength versions available)
Power Meter, 800-1650 nm E50600
Combined singlemode or multimode light source and Power Meter E506X0
Combined singlemode light source and Power Meter with Talk Set E506X1
Application software
Optical Fiber Trace Software: PC Analysis Software under Windows EOFS100
Optical Fiber Cable Software: PC Cable Acceptance Software under Windows EOFS200
Main accessories
RS232 Null modem cable for MTS-5100 ERS2325K
RS232 to USB cable for file transfer to PC ERS232USB
External keyboard E5000Keyb
Additional rechargeable battery E5001
Soft carrying case E5004
Hard transit case E5005
Cigarette lighter power adapter E5006
Optical connectors
Universal single and multimode PC connectors EULCAD, EUNIPCFC, EUNIPCLC, EUNIPCSC, EUNIPCST, EUNIPCDIN
Universal single mode APC connectors EUNIAPCFC, EUNIAPCSC, EUNIAPCST, EUNIAPCDIN
Universal adapters for OTDRs UFCAD, USCAD, USTAD UDINAD
Universal adapters for power meters UFCAD, USCAD, USTAD UDINAD
USER MANUAL 750000992/16 11-1
Chapter
1111Technical specifications
This chapter gives the specifications of:
❏ the MTS 5100e and MTS 5200e mainframes
❏ the OTDR modules
❏ the OTS modules
❏ the available options and accessories.
Mainframe specifications
Display
Screen:
• 8" Black & White or color passive (option 5000/PAS) or 8.4" TFT color (option 5000/COL)
• High resolution display• Vertical scale display resolution of 0.001 dB• Horizontal scale display resolution of 0.01 m (0,4 inch)• Screen saver
Adjustment
• Contrast (Black & White or color passive screen)• Backlight intensity
Storage
Medium
• RAM: 3Mb• Optional 1 Gb Hard disk• Optional 3.5 inch MS DOS compatible HD floppy disk drive
Storage capacity
• 400 OTDR traces typical in internal memory• 250 OTDR traces typical on HD floppy disk• Bellcore GR196 or TD 3000 Laser Precision (write only) compatible format for
OTDR modules; Wavetek format for OTDR and OTS modules.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-2 USER MANUAL 750000992/16
Technical specifications MTSe
Input/Output
• RS232C• Ethernet (option)• Centronics
• IEEE-488 GPIB (option), for MTS 5200e only.
Internal printer (optional for MTS 5200e only)
• Reference 5200/PR• High quality (graphical) thermic printer• 832 dots / line• paper width: 112 mm.
Power supply
Batteries
• Up to 2 Nickel Metal Hydrid batteries• Battery autonomy at 25° C (for 1 battery):
- up to 8 hours of standard use, with normal backlight, according to Bellcore / Telecordia GR-196-CORE standard.- up to 3 hours with permanent acquisition, with normal backlight- up to 2.5 hours with permanent acquisition, with high backlight
AC/DC Adapter / Charger
MTS 5100e MTS 5200e
Reference 5003AC/DC adapter / charger 5007AC/DC adapter / charger
Input 100-250 V50-60 Hz
1.6 A
85-264 V47-400 Hz
1.3 A
Output 12 V DC4.2 A
12 V DC55 Watt max.
Compliant CE CE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-3
MTSe Mainframe specifications
Dimensions
Dimensions of the external keyboard (optional): 280 x 130 x 25 mm(11 x 5.1 x 1 inch).
Environmental conditions
Vibration
The MTSe is able to withstand the following vibration tests:• Complete test consists of 6 cycles for each of the 3 axes x, y, z.• One cycle sweeps from 5 Hz to 200 Hz and back down to 5 Hz with a sweep
duration of one minute per octave.• 3 mm amplitude displacement test for the range of 5 Hz to 9 Hz.• 1G acceleration test for the range of 10 Hz to 200 Hz.
Temperature range
• Operating on mains, options not included: -20° C to + 50° C (- 4°C to + 122°F)
• Operating, specifications guaranteed, all options included: 0° C to +40° C (+ 32°F to + 104°F)
• Storage: -20° C up to + 60° C (- 4°F up to + 140°F)
Humidity
• 95% without condensing
EMI/ESD
• CE compliant
Base unit MTS 5100e MTS 5200e
Height 90 mm 130 mm
Width 235 mm 235 mm
Depth 300 mm 300 mm
Weight 3.5 kgincluding 1 module & 1 battery
5.5 kgincluding internal printer, 2 modules
& 1 battery
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-4 USER MANUAL 750000992/16
Technical specifications MTSe
OTDR Measurement characteristics
Distance measurement
• dual cursors• distance displayed with respect to the calibration of the fiber’s group index• group index adjustable from 1.30000 to 1.70000 in 0.00001 step• display resolution: 1 cm (0.39 inch) max• cursor resolution: 1cm (0.39 inch) max• sampling spacing: from 4 cm (1.57 inch), with up to 128 000 acquisition data
points
• accuracy: ±1 m ± 10-5x distance ± sampling resolution (excluding group index uncertainties)
Attenuation measurement
• dual cursors• display resolution: 0.001 dB• cursor resolution: 0.01 dB• accuracy: ± 0.05 dB / dB ± 0.05 dB
Reflectance measurement
• display resolution: 0.01 dB• accuracy: ± 4 dB
Automatic measurement
• Automatic measurement of all signal characteristics. Slope measurement by linear regression or 2 points measurements.
• Thresholds for fault display:0 to 5.99 dB in 0.01 dB steps for event threshold-11 to -99 dB in 1 dB steps for reflectance0 to 1.99 dB/km in 0.001 dB/km steps for slope
• Display of fiber segment slope and attenuation• Display of position and loss• Display of reflectance• Display of ORL
Manual measurement
• measurement of slope between the cursors• measurement of the loss between two fiber sections• measurement of the reflectance of a reflective event• measurement of the Optical Return Loss between the two cursors.• measurement of a splice either by 2 point or 5 point method
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-5
MTSe OTS measurement characteristics
OTS measurement characteristics
The OTS modules comprise: a Power meter, Light sources and combinations ofLight source/Power meter.
Note Light source = Laser source or Led source
A complete range of optical connectors and adaptors is available.
Light source specifications
• Transmission of a dual wavelength signal on the same connector.• Transmission of a signal indicating the wavelength transmitted.• Modulation of the transmitted signal.• Variable transmission power (for Laser source only)
Power meter specifications
• Choice of wavelength from 800 to 1650 nm in 1 nm increments.• Automatic detection of the wavelength and the modulation.• Selection of automatic or manual calibration.• Manual or automatic storage and printing of the results.• Audio alarm signal when the results is outside the chosen threshold.• Reference level stored in memory.• Automatic zero adjustment.• Result display in dBm, dBr or W (mW, μW or nW).• Alternating 1310/1550 nm (laser source) or 850/1300 nm (LED source)
measurement option.• Display of average result or real time result.
Modules, Options and Accessories
OTDR modules
Multimode OTDR modules
The specifications of the 5023 module are the specifications of the modules 5021and 5022 according to the wavelength.
Wavelength 850 nm 1300 nm 850 & 1300 nm
Multimode Modules 5021MM 5022MM 5023MM
Module ML 5023ML
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-6 USER MANUAL 750000992/16
Technical specifications MTSe
Singlemode OTDR modules available
The specifications of the 5026 (SR, DR, HD, VHD) modules are the specificationsof the modules 5024 and 5025 (SR, DR, HD, VHD) according to the wavelength.The specifications of the 5029 VHD module are the specifications of the 5025 and5027 VHD according to the wavelength.
OTDR module options
502X/VFL/FC VFL option for OTDR module with FC connector
502X/VFL/ST VFL option for OTDR module with ST connector
OTS modules available
Power meter: 50600 PM (800- 1650 nm)
Singlemode Laser source
Wavelength (nm) 1310 1550 1310 & 1550 1625 1550 & 1625
Short Range 5024SR 5025SR 5026SR
Medium Range
High Resolution
5024DR 5025DR 5026DR
High Dynamic
Long Range
5024HD 5025HD 5026HD 5027HD (RTU)
5036 HD
Very High Dynamic 5025VHD 5026VHD 5027VHD 5029VHD
Wavelength (nm) 1310 1550 1310&1550
Laser source 50540 LS 50550 LS 50560 LS
Laser source + Power meter 50640 LTS 50650 LTS 50660 LTS
Laser source + Power meter +
Talkset
50641 LTS/TS 50651 LTS/TS 50661 LTS/TS
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-7
MTSe Modules, Options and Accessories
LED source
Chassis options 1
5000/PAS Color passive display
5000/COL Color TFT display
5000/FD Floppy disk unit
5000/HDisk Hard disk
5000/Eth Ethernet Interface.This option includes:- an adapter RS232/Ethernet- an Ethernet crossed cable for direct connection to the PC.- a software WS-FTP pro.- the init file for the software WS-FTP pro in a diskette.
5200/PR Internal printer with (MTS 5200e only)
5200/IEEE IEEE interface (MTS 5200e only)
5200/VGA Computer display output (MTS 5200e with color TFT display only)
Accessories supplied with the instrument
5000M02 User manual in English
5001 Rechargeable battery
Mains lead and AC/DC adaptor:
5002/1 • for Europe
5002/2 • for United Kingdom
5002/3 • for USA
Other accessories (options)
5000/Keyb External keyboard
Additional AC adapter / Charger MTS 5100e
5003/1 • for Europe
Wavelength (nm) 850 1300 850&1300
LED source + power meter 50610 LTS 50620 LTS 50630 LTS
LED source + Power meter +
Talkset
50611 LTS/TS 50621 LTS/TS 50631 LTS/TS
1. Must be ordered with the instrument
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-8 USER MANUAL 750000992/16
Technical specifications MTSe
5003/2 • for United Kingdom
5003/3 • for USA
5004 Soft carrying case for MTS 5100e
5005 Hard transit case for MTS 5100e
5006 Cigarette lighter Power Adapter
Additional AC Adapter / Charger for MTS 5200e
5007/1 • for Europe
5007/2 • for United Kingdom
5007/3 • for USA
5008 Batch of paper rolls for the MTS 5200e internal printer
Application software
9551 WinTrace PC processing software
9552 WinWDM PC processing software
9558 WinCable software to generate measurement report underWindows™
5996/MTS WS-FTP Pro software to backup the OTDR hard disk to a PC
Connectors supplied with the MTSe
With OTDR singlemode modules and Light source
One connector is supplied per module: either an universal connector (UNI) withan adapter (FC, SC, etc.) or a fixed connector (FC, SC, etc.).FC or Universal connector with adaptorSC or Universal connector with adaptorST or Universal connector with adaptorDIN or Universal connector with adaptorE2000ECFC/APC or universal low reflectance connector with adaptorSC/APC or universal low reflectance connector with adaptorDIN/HRL or universal low reflectance connector with adaptor
With OTDR multimode modules
One connector is supplied per module: either an universal connector (UNI) withan adapter (FC, SC, etc.) or a fixed connector (FC, SC, etc.).FC or Universal connector with adaptorSC or Universal connector with adaptorST or Universal connector with adaptor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-9
MTSe Modules, Options and Accessories
DIN or Universal connector with adaptor
Power meter adapters supplied with the MTSe
for connector VFO: 506VFO
for connector FC/PC:506FC
for connector ST: 506ST
for connector DIN: 506DIN
for connector D4: 506D4
for connector PFO: 506PFO
for connector SC: 506SC
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-10 USER MANUAL 750000992/16
Technical specifications MTSe
Specifications of the OTDR modules
Wavelength and pulsewidth
Multimode Modules
5023MM 5023 ML
5021MM 5022MM
Wavelengtha
a. laser at 25°C at 50ns
850 ± 20 nm 1300 ± 20 nm 8500/1300 ± 20 nm
Dynamic rangeb with long pulse
b. Specified values, at 25°C, corresponding to the one-way difference (in dB) between theextrapolated backscattering level at the start of the fiber and the level containing 98 % of noisedata points, after 3 minutes averaging.
20 dB 18 dB 16/14 dB
RMSc
c. Typical value at 25°C corresponding to the one-way difference (in dB) between the extrapolatedbackscattering level, at the start of the fiber and the RMS noise level, after 3 minutes averaging.
25 dB 23 dB 18/16 dB
Pulsewidth 3 ns to 200 ns 3 ns to 200 ns
Dead zoned at 3 ns- Event dead zone - Attenuation dead zone
d. Typical Values at 25°C :- The event dead zone is measured at 1,5 dB down from the peak of an unsaturated reflectiveevent.- The attenuation dead zone is measured at ± 0.5 dB from the linear regression on a reflectancetype FC/APC (-50 dB).
1.5 m5 m
1.5 m5 m
2 m10 m
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-11
MTSe Specifications of the OTDR modules
Laser
Laser classes applicable to the MTSe modules:
Singlemode Modules
ModulesShort
Range
High
Resolution
Medium
range
High Dynamic
Long range
Very High Dynamic
Long range
5024/25/26
SR
5024/25/26
DR
5024/25/26
/36 HD
5027 /
36 HD
5024/25/26
VHD
5029
VHD
Wavelengtha
a. laser at 25°C at 10 μs
1310 / 1550
± 20 nm
1310 / 1550 ± 20 nm
1310 / 1550 ± 20 nm
1625 ± 10 nm
1310 / 1550± 20 nm
1550/1625± 20 nm
Dynamic rangeb with long pulse
b. Specified values, at 25°C, corresponding to the one-way difference (in dB) between theextrapolated backscattering level at the start of the fiber and the level containing 98 % of noisedata points, after 3 minutes averaging.
27,5 / 25 dB
31 / 29dB
36,5 / 35 dB
35 dB
RMSc
c. Typical value at 25°C corresponding to the one-way difference (in dB) between the extrapolatedbackscattering level, at the start of the fiber and the RMS noise level, after 3 minutes averaging.
31 / 29 dB 35 / 33 dB 40 / 38 dB 39 dB 42 / 43 dB 43 / 41 dB
Distance range 260 km 380 km 380 km
Pulsewidth 10 ns to 10 μs
5 ns to 10 μs
10 ns to 20 μs 10 ns to 20 μs
Dead zoned - Event dead zone - Attenuation deadzone
d. Typical Values at 25°C :- The event dead zone is measured at 1,5 dB down from the peak of an unsaturated reflectiveevent.- The attenuation dead zone is measured at ± 0.5 dB from the linear regression on a reflectancetype FC/APC (-50 dB).
(at 10 ns)4 m
25 m
(at 5 ns)1 m
15 m
(at 10 ns)4 m
25 m
(at 10 ns)8 m
30 m
Reference standard
Modules EN 60825-1 :1994 FDA21CFR§1040.10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-12 USER MANUAL 750000992/16
Technical specifications MTSe
Multimode MM and ML - at 1300 nm- at 850 nm
Class 1Class 3A
Class 1Class 1
Singlemode SR, DR Class 1 Class 1
Singlemode HD- at 1310 nm, 20 μs- at 1310 nm, other pulse widths- at 1550 nm
Class 3AClass 1Class 1
Class 1Class 1Class 1
Singlemode VHD - at 1310 nm, 10 and 20 μs- at 1310 nm, other pulse widths- at 1550 and 1625 nm
Class 3AClass 1Class 1
Class 1Class 1Class 1
VFL option Class 2 Class 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-13
MTSe Specifications of the OTDR modules
Ranges
Ranges for MM and 5023ML modules
Ranges for SR modules
Ranges for DR modules
3 ns 20 ns 50 ns 200 ns
500 m (1.6 kft) x x x1 km (3.25 kft) x x x x2 km (6.5 kft) x x x x
5 km (16 kft) x x x x10 km (33 kft) x x x x20 km (65 kft) x x x x
40 km (131 kft) x x x80 km (262 kft) x
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs
2 km (6.5 kft) x x x5 km (16 kft) x x x x
10 km (33 kft) x x x x x20 km (65 kft) x x x x x x40 km (131kft) x x x x x x x
80 km (459kft) x x x x x140 km (459 kft) x x x x260 km (853 kft) x
5 ns 20 ns 100 ns 300 ns 1 μs 3 μs 10 μs
2 km (6.5 kft) x x x
5 km (16 kft) x x x x10 km (33 kft) x x x x x20 km (65 kft) x x x x x x
40 km (131 kft) x x x x x x80 km (262 kft) x x x x x140 km (459 kft) x x x x
260 km (853 kft) x x x
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-14 USER MANUAL 750000992/16
Technical specifications MTSe
Ranges for HD modules
Ranges for VHD modules
Ranges for 1625 nm 5027 modules (RTU)
Specifications of the VFL option (OTDR module)
• wavelength: 635 nm ± 15 nm at 25 °C• fiber length: up to 5 km
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km (16 kft) x x x x10 km (33 kft) x x x x x20 km (65 kft) x x x x x x
40 km (131kft) x x x x x x x x80 km (262kft) x x x x x x x x140km (459kft) x x x x x x x
260km (853kft) x x x x380 km x x
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km (16 kft) x x x x10 km (33 kft) x x x x x
20 km (65 kft) x x x x x x40 km (131kft) x x x x x x x x80 km (262kft) x x x x x x x x
140km (459kft) x x x x x x x260km (853kft) x x x x x380 km x x x
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km (16 kft) x x x x
10 km (33 kft) x x x x x20 km (65 kft) x x x x x x40 km (131kft) x x x x x x x x
80 km (262kft) x x x x x x x x140km (459kft) x x x x x x x260km (853kft) x x x x x
380 km x x
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-15
MTSe Specifications of the OTS modules at 25 °C
Specifications of the OTS modules at 25 °C
Light sources
Possibility of alternated transmission at 1310/1550 nm (Laser source) or 850/1300 nm (LED source), every 10 seconds approx.
Multiple Wavelength Power Meter
Calibrated wavelengths: 850 / 1310 / 1550 nm
Possible wavelengths: 800 to 1650 nm in 1 nm increments
Accuracy for calibrated wavelengths: ± 0,2 dB (at - 30 dBm, FC/PC)
Resolution: 0,01 dBm / 0,01 nW
Measurement range: + 5 to - 65 dBm (at 850 nm)+ 5 to - 70 dBm (at 1310 and 1550 nm)
Possibility of alternated measurement at 1310 and 1550 nm.
Power Meter memory
• Capacity: 300 results• Stored parameters for manual or automatic measurement:
- Date / time- Wavelength- Measurement result (dBm)- Reference (dBm)- Received mode (CW, 270 Hz ... 2 kHz)
Specifications of the Talkset option (OTS module)
• Dynamic: 35 dB typical at 25°C
Laser sources LED sources
Wavelength(source at 25°C)
1310 & 1550 ± 30 nm
850 nm ± 30 nm
1300 nm ± 30 nm
850 & 1300 nm ± 30 nm
Spectral width < 5 nm 50 nm 150 nm 50 / 150 nm
Stability in 1 hourStability in 24 h.
± 0,05 dB± 0,15 dB
Calibrated output power
0 dBm -17 dBm -19 dBm -18 / -20 dBm
Variable output power
0 to - 10 dBm
Modulation of transmitted signal
270 Hz, 330 Hz, 1 kHz and 2 kHz
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
11-16 USER MANUAL 750000992/16
Technical specifications MTSe
Specifications WDM modules
Typical values measured at 25° C, unless otherwise stated.
Module 5071- C band Module 5073- C+L band
Wavelength
Range 1525-1570 nm 1525-1610 nm
Sweep time (real time) < 1 s <1,5 s
Accuracy a
a. from -40 dBm to +5 dBm.
± 10 pm
Display Resolution 1 pm
Min. spacing between channels
10 GHz (80 pm)
Optical Bandwidth (FWHM) 35 pm
Power levels
Display range - 90 dBm at + 30 dBm
Display Resolution 0,01 dB
Measurement range on a channel
- 70 dBm at + 10 dBm
Max. admissible power:- total (before signal cut off)
- for a channel
+ 20 dBm+ 10 dBm
Accuracy b
b. at -30 dBm and 1550 nm, excluding the uncertainty due to the input connector.
± 0,5 dB max
Linearity 1 ±0,1 dB
Flatness ± 0,2 dBc
c. at -30 dBm and in the range 1530 nm - 1565 nm (reference : 1550 nm)
± 0,2 dBd
d. at -30 dBm and in the range 1530 nm - 1605 nm (reference : 1550 nm)
Polarization dependence (PDL)
± 0,2 dB
ORL (Optical Return Loss) > 35 dB
ORR (Optical Rejection Ratio)e-
e. from the top of a carrier, in the range 1530 to 1605 nm and at 0 dBm
40 dB at 0,8 nm from the carrier34 dB at 0,4 nm from the carrier
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
USER MANUAL 750000992/16 11-17
MTSe Information about the 5020TF fiber modules
Information about the 5020TF fiber modules
The 5020 TF single-mode and multi-mode contains two reels of fiber to be usedwith the reflectometer. They are destined for training, demonstrations and can beused as a launch fiber.
Note As these modules are not qualified as measurement devices, there is no need for calibration certificate.
Front panel of a module
Advice on how to use the fiber 2 (long fiber)
Given that the loss per unit on fiber 2 may be higher near port 1:• when measuring a dead zone, it is preferable to connect the reflectometer to
the port 4.• when measuring the insertion loss of a connector located after the launching
cable, the reflectometer should be connected to port 1.
Module 5020TF/MM
(Multi-mode)
Module 5020TF/SM
(Single-mode)
Type of fiber used Corning MM Corning SMF 28
Recommended group index
1.50140 850nm ; 1.49660 @ 1310nm
1.46750 @ 1310nm ; 1.46810 @ 1550/1625nm
Length of fiber 1Length of fiber 2
300 ± 30 m300 ± 30 m
466 ± 23 m1000 ± 50 m
Loss of the connectors 0.5 dB a
a. Guaranteed to 1625 nm, except for the port 1 of fiber 2.
Port 1 Port 2 Port 3 Port 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
13-2 HANDBUCH 750000993/14
Technische Daten MTSe
Interner Drucker (Option nur für MTS 5200e)
• Bestellnummer 5200/PR• hochwertiger (grafischer) Thermodrucker• 832 Punkte/Zeile• Papierbreite: 112 mm.
Spannungsversorgung
Batterien
• maximal 2 Nickel-Metallhydrid-Batterien• Batteriebetrieb bei 25 °C (für 1 Batterie):
- bis zu 8 Stunden bei Standardgebrauch und abgeschalteter Hintergrundbeleuchtung entsprechend Bellcore / Telcordia GR-196-CORE- bis zu 3 Stunden bei ständigen Messungen und abgeschalteter Hintergrundbeleuchtung- bis zu 2,5 Stunden bei ständigen Messungen und eingeschalteter Hintergrundbeleuchtung
Externes Netzteil/Ladegerät
Abmessungen
Abmessungen der externen Tastatur (Option): 280 x 130 x 25 mm
MTS 5100e MTS 5200e
Bestellnummer 5003AC/DC Netzteil/Ladegerät
5007AC/DC Netzteil/Ladegerät
Eingang 100-250 V50-60 Hz
1,6 A
85-264 V47-400 Hz
1,3 AAusgang 12 V DC
4,2 A12 V DC
55 Watt max.
Norm CE CE
Grundgerät MTS 5100e MTS 5200e
Höhe 90 mm 130 mm
Breite 235 mm 235 mm
Tiefe 300 mm 300 mm
Gewicht3.5 kg
mit 1 Modul & 1 Batterie
5.5 kgmit internem Drucker,
2 Modulen & 1 Batterie
HANDBUCH 750000993/14 13-3
MTSe Technische Daten MTSe-Basisgerät
Umgebungsbedingungen
Vibrationsfestigkeit
Das MTSe ist nach folgenden Vibrationstests geprüft:• Der vollständige Test umfasst 6 Zyklen für jede der drei Achsen x, y, z.• Ein Zyklus wobbelt von 5 Hz auf 200 Hz und zurück auf 5 Hz mit einer
Wobbeldauer von einer Minute je Oktave.• 3-mm- Amplitudenverschiebungstest für den Bereich von 5 Hz bis 9 Hz.• 1G-Beschleunigungstest für den Bereich von 10 Hz bis 200 Hz
Temperaturbereich
• bei Netzbetrieb ohne Optionen: -20 °C bis +50 °C • Betriebstemperatur bei Einhaltung der Spezifikationen mit allen Optionen:
0 °C bis +40 °C • Lagerung: -20 °C bis +60 °C
Luftfeuchte
• 95% nichtkondensierend
EMI/ESD
• entsprechend CE-Norm
Grundgerät - Optionen 1
5000/PAS passiver Farbbildschirm
5000/COL TFT-Farbbildschirm
5000/FD Diskettenlaufwerk
5000/HDisk Festplatte
5000/Eth EthernetDiese Option umfasst:- einen RS232/Ethernet-Adapter- ein gekreuztes Ethernet-Kabel zum direkten Anschlussan den PC
- die Software WS-FTP Pro- eine Diskette mit der Initialisierungsdatei der SoftwareWS-FTP Pro.
5200/PR Interner Drucker (nur MTS 5200e)
5200/IEEE IEEE-Schnittstelle (nur MTS 5200e)
5200/VGA Ausgang für Computer-Monitor (nur MTS 5200e mit TFT-Display)
1. Bestellung nur zusammen mit dem Gerät.
13-4 HANDBUCH 750000993/14
Technische Daten MTSe
Standardzubehör (im Lieferumfang enthalten)
5000M02 Handbuch in englischer Sprache
5001 Akkumulator
Netzkabel und DC-Netzteil
5002/1 für Europa
5002/2 für Großbritannien
5002/3 für die USA
Weiteres Zubehör (Optionen)
5000/Keyb externe Tastatur
zusätzliches Netzteil/Ladegerät für MTS 5100e
5003/1 für Europa
5003/2 für Großbritannien
5003/3 für die USA
5004 Tragetasche für MTS 5100e
5005 Transportkoffer für MTS 5100e
5006 Kfz.-Ladeadapter (für Zigarettenanzünder)
zusätzliches Netzteil/Ladegerät für MTS 5200e
5007/1 für Europa
5007/2 für Großbritannien
5007/3 für die USA
5008 Paket Druckerpapier für internen Drucker des MTS 5200e
Anwendungssoftware
OFS-100 PC-Auswertesoftware Fiber Trace (Bearbeitung der OTDR-,WDM-, PMD-, CD-Kurven).
OFS-200 Software Fiber Cable zur Erstellung von Messberichten unterWindows™
5996/MTS Software WS-FTP Pro zur Sicherung der OTDR-Festplatte auf PC(Windows 95)
Zum Lieferumfang des MTSe gehörende Steckverbinder
OTDR-Singlemode-Einschübe und Lichtquelle
Für jedes Modul wird ein Verbinder geliefert: entweder ein universellerSteckverbinder (UNI) mit einem Adapter (FC, SC usw.) oder ein fest installierterSteckverbinder (FC, SC usw.).FC oder Universal-Steckverbinder mit Adapter
HANDBUCH 750000993/14 13-5
MTSe Technische Daten MTSe-Basisgerät
SC oder Universal-Steckverbinder mit AdapterST oder Universal-Steckverbinder mit AdapterDIN oder Universal-Steckverbinder mit AdapterE2000ECFC/APC oder universeller reflexionsarmer Steckverbinder mit AdapterSC/APC oder universeller reflexionsarmer Steckverbinder mit AdapterDIN/HRL oder universeller reflexionsarmer Steckverbinder mit Adapter
OTDR-Multimode-Module
Für jedes Modul wird ein Steckverbinder geliefert: entweder ein universellerSteckverbinder (UNI) mit einem Adapter (FC, SC usw.) oder ein fest installierterSteckverbinder (FC, SC usw.).• FC oder Universal-Steckverbinder mit Adapter• SC oder Universal-Steckverbinder mit Adapter• ST oder Universal-Steckverbinder mit Adapter• DIN oder Universal-Steckverbinder mit Adapter
Zum Lieferumfang des MTSe gehörende Adapter für den
Leistungsmesser
für VFO-Anschluss: 506VFOfür FC/PC-Anschluss: 506FCfür ST-Anschluss: 506STfür DIN-Anschluss: 506DINfür D4-Anschluss: 506D4für PFO-Anschluss: 506PFOfür SC-Anschluss 506SC
13-6 HANDBUCH 750000993/14
Technische Daten MTSe
OTDR-Module
OTDR-Module und Optionen
Multimode-Module für OTDR
Die technischen Angaben für das Modul 5023 gelten entsprechend derWellenlänge auch für die Module 5021 und 5022.
Singlemode-Module für OTDR
Die technischen Angaben für das Modul 5026 (SR, DR, HD, VHD) geltenentsprechend der Wellenlänge auch für die Module 5024 und 5025 (SR, DR, HD,VHD) Die technischen Angaben des Einschubs 5029VHD gelten entsprechendder Wellenlänge auch für die Einschübe 5025VHD und 5027VHD.
OTDR-Modul (Optionen)
502X/VFL/FC VFL-Rotlichtquelle für OTDR-Modul mit FC-Verbinder
502X/VFL/ST VFL-Rotlichtquelle für OTDR-Modul mit ST-Verbinder
OTDR-Messungen
Entfernungsmessungen
• zwei Cursors• Entfernungsanzeige auf Grundlage der Kalibrierung des
Gruppenlaufzeitindex der Faser• Gruppenlaufzeitindex einstellbar von 1,30000 bis 1,70000 in Schritten von
0,00001• Anzeigeauflösung: max. 1 cm
Wellenlänge 850 nm 1300 nm 850 & 1300 nm
Multimode-Module 5021MM 5022MM 5023MM
Modul ML 5023ML
Wellenlänge 1310 nm 1550 nm1310 &
1550 nm1625 nm
1550 &
1625
Kurze Reichweite 5024SR 5025SR 5026SR
Mittlere Reichweite
Hohe Auflösung
5024DR 5025DR 5026DR
Hohe Dynamik
Große Reichweite
5024HD 5025HD 5026HD 5027HD RTU
5036 HD
Sehr hohe Dynamik 5025 VHD 5026 VHD 5027 VHD 5029 VHD
HANDBUCH 750000993/14 13-7
MTSe OTDR-Module
• Cursorauflösung: max. 1 cm • Messabstand: ab 4 cm mit bis zu 128 000 Messpunkten
• Messgenauigkeit: ±1 m ± 10-5x Entfernung ± Messauflösung(ohne Gruppenindex-Unsicherheit)
Dämpfungsmessung
• zwei Cursors• Anzeigeauflösung: 0,001 dB• Cursorauflösung: 0,01 dB• Messgenauigkeit: ± 0,05 dB / dB ± 0,05 dB
Reflexionsmessung
• Anzeigeauflösung: 0,01 dB• Messgenauigkeit: ± 4 dB
Automatische Messungen
• Automatische Messung aller Signalparameter. Steigungsmessung durch lineare Regression oder 2-Cursor-Methode.
• Schwellwerte für Fehleranzeige:0 bis 5,99 dB in Schritten von 0,01 dB für Ereignis-11 bis -99 dB in Schritten von 1 dB für Reflexion0 bis 1,99 dB/km in Schritten von 0,001 dB/km für Steigung
• Anzeige der Steigung des Faserabschnitts und der Dämpfung• Anzeige von Position und Dämpfung des Fehlers• Anzeige der Reflexion• Anzeige der ORL
Manuelle Messungen
• Messung der Steigung zwischen den Cursors• Messung der Dämpfung zwischen zwei Faserabschnitten• Messung der Reflexion eines reflektierenden Ereignisses • Messung der ORL zwischen zwei Cursorpunkten.• Messung eines Spleißes mit der 2-Cursor- oder 5-Cursor-Methode
13-8 HANDBUCH 750000993/14
Technische Daten MTSe
Technische Daten der OTDR-Module
Wellenlänge und Pulslänge
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Multimode-Einschübe
5023MM 5023ML
5021MM 5022MM
Wellenlängea
a. Laser bei 50 ns
850 ± 20 nm 1300 ± 20 nm 850/1300 ± 20 nm
Dynamikbereichb mit großer Pulslänge
b. Wert entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zumBeginn der Faser und dem Rauschpegel, der nach 3-minütiger Mittelwertbildung 98 % der Da-tenpunkte enthält.
20 dB 18 dB 16 / 14 dB
RMSc
c. Wert entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zuBeginn der Faser und dem RMS-Rauschpegel nach 3-minütiger Mittelwertbildung.
25 dB 23 dB 18 / 16 dB
Pulslänge 3 ns bis 200 ns
Totzoned bei 3 ns- Ereignis-Totzone - Dämpfungs-Totzone
d. - Die Ereignis-Totzone wird bei 1,5 dB hinter dem Peak eines nichtgesättigten reflektiven Ereig-nisses gemessen.- Die Dämpfungs-Totzone wird bei ± 0,5 dB unter der Regressionsgeraden an einer Reflexionvom Typ FC/APC (-50 dB) gemessen.
1,5 m5 m
1,5 m5 m
2 m10 m
HANDBUCH 750000993/14 13-9
MTSe OTDR-Module
Singlemode-Einschübe
EinschubKurzstrec
ke
Hohe
Auflösung
Mittelstrecke
Hohe Dynamik
Langstrecke
Sehr hohe Dynamik
Langstrecke
5024/25/26SR
5024/25/26DR
5024/25/26/36HD
5027/36 HD
5024/25/26 VHD
5029 VHD
Wellenlängea
a. Laser bei 10 μs
1310/1550 ± 20 nm
1310/1550 ± 20 nm
1310 /1550± 20 nm
1625 ± 10 nm
1310/ 1550
± 20 nm
1550/1625 ± 10
nm
Dynamik-bereichb mit großer Pulslänge
b. Entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zum Be-ginn der Faser und dem Rauschpegel, der nach 3-minütiger Mittelwertbildung 98 % der Daten-punkte enthält.
27,5 / 25 dB
31 / 29 dB 36.5 / 35 dB 35 dB
RMSc
c. Entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zu Be-ginn der Faser und dem RMS-Rauschpegel nach 3minütiger Mittelwertbildung.
31 / 29 dB 35 / 33 dB 40 / 38 dB 39 dB 42/43 dB
43/42 dB
Messbereich 260 km 380 km 380 km
Pulslänge 10 ns bis 10 μs
5 ns bis 10 μs
10 ns bis 20 μs 10 ns bis 20 μs
Totzoned mit kürzester Pulslänge
- Ereignis-Totzone - Dämpfungs-Totzone
d. - Die Ereignis-Totzone wird bei 1,5 dB hinter dem Peak eines nichtgesättigten reflektiven Ereig-nisses gemessen.- Die Dämpfungs-Totzone wird bei ± 0,5 dB unter der Regressionsgeraden an einer Reflexionvom Typ FC/APC (-50 dB) gemessen.
(bei 10 ns)
4 m25 m
(bei 5 ns)
1 m15 m
(bei 10 ns)
4 m25 m
(bei 10 ns)
8 m30 m
13-10 HANDBUCH 750000993/14
Technische Daten MTSe
Laserklassen der OTDR-Einschübe
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Messbereiche
Messbereich für Multimode-Module und 5023ML-Module
Referenznorm
Einschübe EN 60825-1 :1994 FDA21CFR§1040.10
Multimode MM und ML - bei 1300 nm- bei 850 nm
Klasse 1Klasse 1M
Klasse 1Klasse 1
Singlemode SR, DR Klasse 1 Klasse 1
Singlemode HD- bei 1310 nm- bei 1550 nm
Klasse 1MKlasse 1
Klasse 1Klasse 1
Singlemode VHD - bei 1310 nm- bei 1550 und 1625 nm
Klasse 1MKlasse 1
Klasse 1Klasse 1
VFL-Option Klasse 2 Klasse 2
3 ns 20 ns 50 ns 200 ns
500 m x x x1 km x x x x2 km x x x x5 km x x x x
10 km x x x x20 km x x x x40 km x x x80 km x
HANDBUCH 750000993/14 13-11
MTSe OTDR-Module
Messbereiche für die SR-Module
Messbereiche für die DR-Module
Messbereiche für die HD-Module
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs
2 km x x x5 km x x x x
10 km x x x x x20 km x x x x x x40 km x x x x x x x80 km x x x x x140 km x x x x260 km x
5 ns 20 ns 100 ns 300 ns 1 μs 3 μs 10 μs
2 km x x x5 km x x x x
10 km x x x x x20 km x x x x x x40 km x x x x x x80 km x x x x x140 km x x x x260 km x x x
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km x x x x10 km x x x x x20 km x x x x x x40 km x x x x x x x x80 km x x x x x x x x140 km x x x x x x x260 km x x x x380 km x x
13-12 HANDBUCH 750000993/14
Technische Daten MTSe
Messbereiche für die VHD-Module
Messbereiche für die 1625 nm-Einschübe 5027 (RTU)
Technische Daten zur VFL-Rotlichtquelle
(OTDR-Modul)
• Wellenlänge: 635 nm ± 15 nm bei 25 °C• Faserlänge: bis zu 5 km• Laserklasse 2
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km x x x x10 km x x x x x20 km x x x x x x40 km x x x x x x x x80 km x x x x x x x x140 km x x x x x x x260 km x x x x x380 km x x x
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km x x x x10 km x x x x x20 km x x x x x x40 km x x x x x x x x80 km x x x x x x x x140 km x x x x x x x260 km x x x x x380 km x x
HANDBUCH 750000993/14 13-13
MTSe OTS Module
OTS Module
Verfügbare OTS-Module
Leistungsmesser: 50600 PM (800 - 1650 nm)
Singlemode-Laserquelle
LED-Quelle
OTS-Messungen
Das OTS-Modul besteht aus einem Leistungsmesser, Lichtquellen sowie ausKombinationen aus Leistungsmesser/Lichtquelle (Dämpfungsmessplatz).
Hinweis Lichtquelle = Laserquelle oder LED-Quelle.
Es wird eine vollständige Palette an optischen Verbindern und Adapternangeboten.
Lichtquelle - Technische Daten
• Übertragung des Signals in beiden Wellenlängen über den gleichen Verbinder.
• Übertragung eines Signals mit Angabe der gesendeten Wellenlänge.• Modulation des gesendeten Signals.
Wellenlänge (nm) 1310 1550 1310 & 1550
Laserquelle 50540 LS 50550 LS 50560 LS
Dämpfungsmessplatz
(Laserquelle +
Leistungsmesser)
50640 LTS 50650 LTS 50660 LTS
Dämpfungsmessplatz
(Laserquelle +
Leistungsmesser) +Talkset
50641 LTS/TS 50651 LTS/TS 50661 LTS/TS
Wellenlänge (nm) 850 1300 850 & 1300
Dämpfungsmessplatz (LED-
Quelle + Leistungsmesser)
50610 LTS 50620 LTS 50630 LTS
Dämpfungsmessplatz (LED-
Quelle + Leistungsmesser)
+Talkset
50611 LTS/TS 50621 LTS/TS 50631 LTS/TS
13-14 HANDBUCH 750000993/14
Technische Daten MTSe
• Einstellbare Ausgangsleistung (nur für Laserquelle).
Leistungsmesser - Technische Daten
• Wellenlänge von 800 bis 1650 nm in Schritten von 1 nm wählbar.• Automatische Erkennung der Wellenlänge und Modulation.• Automatische oder manuelle Kalibrierung auswählbar.• Manuelle oder automatische Speicherung und Ausdruck der Ergebnisse.• Akustischer Alarm, wenn das Messergebnis Schwellwert überschreitet.• Speicherung des Referenzpegels.• Automatischer Nullabgleich.• Ergebnisanzeige in dBm, dBr oder W (mW, μW oder nW).• Option mit Umschaltung zwischen Messungen bei 1310 und 1550 nm
(Laserquelle) und 850/1300 nm (LED-Quelle).• Anzeige des gemittelten Ergebnisses oder Echtzeitergebnisses.
Technische Daten zu OTS-Modulen
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Lichtquellen.
Umschaltung der Sende-Wellenlänge von 1310/1550 nm (Laserquelle) und 850/1300 nm (LED-Quelle) alle 10 Sekunden möglich.
Laserklasse 2
Leistungsmesser für mehrere Wellenlängen
Kalibrierte Wellenlängen: 850 / 1310 / 1550 nm
Mögliche Wellenlängen: 800 bis 1650 nm in Schritten von 1 nm
Laser-
quellenLED-Quellen
Wellenlänge (Quelle bei 25 °C)
1310 & 1550± 30 nm
850 nm± 30 nm
1300 nm ± 30 nm
850 & 1300 ± 30 nm
Spektralbreite < 5 nm 50 nm 150 nm 50/150 nmStabilitäta
- über 1 Stunde- über 24 Stunden
a. Nach einer Aufwärmzeit von 15 Minuten.
± 0,05 dB± 0,15 dB
kalibrierte Ausgangsleistung 0 dBm -17 dBm -19 dBm -18/-20 dBmvariable Ausgangsleistung 0 bis -10 dBmModulation desgesendeten Signals
270 Hz, 330 Hz, 1 kHz und 2 kHz
HANDBUCH 750000993/14 13-15
MTSe WDM-Module
Genauigkeit der kalibrierten Wellenlängen: ± 0,2 dB (bei -30 dBm, FC/PC)
Auflösung: 0,01 dBm / 0,01 nW
Messbereich: +5 bis -65 dBm (bei 850 nm)+ 5 bis - 70 dBm (bei 1310 und 1550 nm)
Möglichkeit der Ausführung wechselnder Messungen bei 1310 und 1550 nm.
Speicher des Leistungsmessers
• Kapazität: 300 Ergebnisse• Gespeicherte Parameter für manuelle oder automatische Messungen:
- Datum / Uhrzeit- Wellenlänge- Messergebnis (dBm)- Referenz (dBm)- Empfangsmodus (CW, 270 Hz ...2kHz)
Technische Angaben zur Talkset-Option (OTS-Modul)
• Dynamik: 35 dB (typisch) bei 25 °C
WDM-Module
Verfügbare WDM-Module
5071 WDM C-Band WDM-Modul
5073 WDM C + L-Band WDM-Modul
With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany
13-16 HANDBUCH 750000993/14
Technische Daten MTSe
Technische Angaben zum WDM-Modul
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Modul 5071
C-Band
Modul 5073
C+L Band
Wellenlänge
Bereich 1525 - 1570 nm 1525 - 1610 nm
Wobbeldauer (Echtzeit) < 1 s < 1,5 s
Genauigkeit a
a. von -40 dBm bis +5 dBm.
± 10 pm
Anzeigeauflösung 1 pm
minimaler Kanalabstand 10 GHz (80 pm)
Optische Bandbreite (FWHM) 35 pm
Leistungspegel
Anzeigebereich - 90 dBm bis + 30 dBm
Anzeigeauflösung 0,01 dB
Messbereich - 70 dBm bis + 10 dBm
max. zulässiger Leistungspegel:- Gesamtpegel (vor Signalabschaltung)
- des Kanals
+ 20 dBm+ 10 dBm
Genauigkeit b
b. bei -30 dBm und 1550 nm, ohne durch den Eingangssteckverbinder bedingte Unsicherheit.
± 0,5 dB (max.)
Linearität a ± 0,1 dB
Welligkeit ± 0,2 dB c
c. bei -30 dBm und im Bereich 1530 nm - 1565 nm (Referenz: 1550 nm)
± 0,2 dBd
d. bei -30 dBm und im Bereich 1530 nm - 1605 nm (Referenz: 1550 nm)
Polarisationsabhängigkeit (PDL) ± 0,2 dB
ORL (Optical Return Loss) > 35 dB
ORR (Optical Rejection Ratio) e-
e. Vom oberen Ende eines Trägers, im Bereich von 1530 bis 1605 nm, bei 0 dBm und mit maxi-maler Auflösung.
40 dB bei 0,8 nm vom Träger34 dB bei 0,4 nm vom Träger
HANDBUCH 750000993/14 13-17
MTSe PMD-Module
PMD-Module
Verfügbare PMD-Module
5073PMD C+L PMD-Modul
5073WDM/PMD C+L WDM/PMD-Modul
PMD- und WDM-Upgrades
5071PMDUP C-Band PMD-Upgrade für 5071 WDM-Modul
5073 PMDUP C+L PMD-Upgrade für 5073 WDM-Modul
5073WDMUP C+L WDM-Upgrade für 5073 PMD-Modul
PMD-Zubehör
OVS-15 Variabler optischer Polarisator für PMD-Messungen
OBS-15 Optische Breitbandquelle
Technische Daten der PMD-Module
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Modul 5071 WDM/PMD 5073 PMD oder
5073 WDM/PMD
Messdauer ab 5 Sekunden, unabhängig vom PMD-Wert
Dynamikbereich bis 35 dB (170 km bei 0,2 dB/km)
Wellenlängenbereiche mit OBS-15 (Option)
C-Band C+L-Band
DGD (DIFFERENZIELLE GRUPPENLAUFZEIT)
Messbereich 0,2 bis 60 ps 0,1 bis 60 ps
Anzeigebereich 0,01 bis 200 ps
13-18 HANDBUCH 750000993/14
Technische Daten MTSe
CD-Module
CD-Module, Optionen und Zubehör
5083CD 1310/1480/1550/1625 nm, 35 dB, OTDR/CD-Mmodul
CD-Moduloption
508X/LS 1310/1480/1550/1625 nm DFB-Quelle
508X/VFL/FC VFL-Option für CD-Modul, FC/PC-Steckverbinder
508X/VFL/ST VFL-Option für CD-Modul, ST-Steckverbinder
508X/VFL/UPP VFL-Option für CD-Modul, UPP-Steckverbinder
Zubehör für CD-Messungen
TERM/CD/FC FC/PC&APC-Referenzreflektor
TERM/CD/SC SC/PC&APC-Referenzreflektor
TERM/CD/ST ST/PC-Referenzreflektor
TERM/CD/E2000 E2000/HR&HRL-Referenzreflektor
Technische Daten des CD-Moduls
Wenn nicht anders angegeben, handelt es sich um typische, bei 25 °C gemesseneWerte.
Technische Daten 5083 CD-Modul
Messzeit für den gesamten Wellenlängenbereich: manuellautom.
ab 30 s ab 55 s
Dynamikbereich a
a. mit automatischer 3-Punkt-Messung und Referenzreflektor.
bis 120 km
Mindestentfernung b
b. an einer nicht gesättigten Fresnelreflexion
10 km
Wellenlängenbereich 1255 bis 1650 nm
Wellenlängengenauigkeit (absolut) ± 0,1 nm
Reproduzierbarkeit der Nulldispersionswellenlängec
c. an einer 25 km langen G655-Faser
0,5 nm
Reproduzierbarkeit des Dispersionskoeffizientend
d. bei 1550 nm, an einer 75 km langen G652-Faser
± 2 ps/nm*km
Dispersionsbereich 0,1 bis 100 ps/nm*km
Reproduzierbarkeit der Dispersionsteigungd ± 1%
HANDBUCH 750000993/14 13-19
MTSe CD-Module
Laserklasse: 1
Technische Daten des
Lasers5083 CD-Modul
Wellenlänge (DFB-Laser)
1310 ± 5 nm 1480 ± 5 nm 1550 ± 5 nm 1625 ± 5 nm
Spektrale Breite < 10 pm
Pegelstabilität (24 Std.)a
a. nach einer Aufwärmzeit von bis zu 15 Minuten
± 0,10 dB
Kalibrierte Ausgangsleistung
1.5 dBm 3 dBm 3 dBm 3 dBm
Variable Ausgangsleistung
- 10 dB unter der kalibrierten Leistung
Technische Daten zum OTDR
5083 CD-Modul
Wellenlänge (DFB-Laser) 1310 ± 5 nm 1480± 5 nm 1550± 5 nm 1625 ± 5 nm
Dynamikbereich a
a. Entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zum Be-ginn der Faser und dem Rauschpegel, der nach 3-minütiger Mittelwertbildung 98 % der Daten-punkte enthält.
35 dB 33 dB 32.5 dB 33 dB
RMSb
b. Entsprechend der Einwegdifferenz in dB zwischen dem extrapolierten Rückstreupegel zum Be-ginn der Faser und dem RMS-Rauschpegel nach 3-minütiger Mittelwertbildung.
39 dB 38 dB 37 dB 37 dB
Entfernungsbereich 380 km
Pulslänge 10 ns bis 20 μs
Totzone
- Ereignis-Totzone c
- Dämpfungs-Totzone d
c. Gemessen mit dem kürzesten Puls bei 1,5 dB unterhalb des Peaks eines nicht gesättigten re-flektiven Ereignisses.
d. Gemessen mit dem kürzesten Puls bei ± 0,5 dB ab der linearen Regression an einer Reflexionvom Typ FC/PC.
6 m (max.)30 m
13-20 HANDBUCH 750000993/14
Technische Daten MTSe
Bereiche
Technische Daten der VFL-Option (CD-Modul)
• Wellenlänge: 635 nm ± 15 nm bei 25 °C• Faserlänge: bis zu 5 km• Laserklasse 2
10 ns 30 ns 100 ns 300 ns 1 μs 3 μs 10 μs 20 μs
5 km (16 kft) x x x x
10 km (33 kft) x x x x x
20 km (65 kft) x x x x x x
40 km (131kft) x x x x x x x x
80 km (262kft) x x x x x x x x
140km (459kft) x x x x x x x
260km (853kft) x x x x
380 km x x