BroadcastCatalogue2009
Professional Broadcast Equipment
TM
INTRODUCTIONwww.paguk.com
PAG. The choice of professionals worldwide.
PAG is the leading designer and manuafacturer of high-quality batteries, chargers andcamera lighting for the broadcast and professional video industries. PAG’s aim is toprovide the highest quality products for the job, the greatest value for money and thebest technical advice and after sales support for you, the professional.
PAG began designing and manufacturing production and post-production equipment forthe film industry over 40 years ago. During the 1980s the demand for power for the firstportable electronic cameras led the company into the Broadcast Television arena.> The PAGlok Connector was one of the industry’s earliest battery mounting systems.> Fast-charging had a reputation for reducing battery life until PAG developed its
PAG ACS (Advanced Charging System) software.
It is PAG’s intention to create the premier product for the market. Safety, reliability anddurability are the prime concerns at all stages of a product’s development. When youbuy a PAG product you can be assured that it has achieved a quality standard that issecond to none.
PAG has always maintained its own Research & Development facility, which has enabledthe company to develop the world-leading technology that is embodied throughout itsproduct range today:> PAG’s unique charging software extends battery life.> PAG Time Batteries feature the most accurate built-in Power & Time Display.> Paglight is the industry’s most versatile camera light.
PAG products have earned a reputation throughoutthe world for excellence in quality, reliability andperformance. The PAG Warranty reinforces thisreputation (see Page 27).
A full after-sales service is providedby PAG during a product’s lifetime, whichincludes servicing, repairs and technicaladvice. PAG’s worldwide network of AuthorisedService Centres has a wealth of specialistknowledge, the result of PAG’s 40 yearsexperience. Using these centres is the onlyway to ensure the continuation of the qualitystandard for which you first chose PAG products.
PAG products are available via a worldwidenetwork of companies and agents as well as ouron-line sales service www.pagstore.com
1
Paglight
PAG Snap-on Compatible System
PAGlok System
9752 QUASAR/PSU9726 QUASAR
9792 AR124PLD
9613 Freelancer
9302L110 Time
Battery
9791Camera
Power Supply
9522/-PAGlok
Connector
9727 QUASAR
9795 PULSAR
All-Chemistry PAG chargers incorporating patentedsliding Snap-on compatible connectors, suitable forcharging PAG Li-Ion and some Anton-Bauer batteries(not Dionic).
PAGlok and V-Mount batteries can also be chargedvia the front PP90 sockets using the appropriatecharge adaptor.
9753 QUASAR/PSU
9383L95 TimeBattery
Paglight
9310L95e
Battery
9551 Power Plate dualbattery mount for L110,L95 & ZL-50 PAGlokbatteries
9316ZL-150Battery
9315ZL-50
Battery
9551V Power Plate dualbattery mount for L110, L95& ZL-50 V-Mount batteries
9382L95 TimeBattery
9798Camera
Power Supply
9552 Power Plate dualbattery mount for L110, L95& ZL-50 PAGlok batteries
9552V Power Plate dualbattery mount for L110, L95& ZL-50 V-Mount batteries
9310VL95e
Battery
9316VZL-150Battery
9315VZL-50
Battery
9302VL110 Time
Battery
9613V PAG V22-channel
sequential charger
9522V/-V-Mount
Connector
9360L95 TimeBattery
9791VCamera
Power Supply
9553 Power Plate dualbattery mount for L110, L95& ZL-50 PAGlok batteries
9553V Power Plate dualbattery mount for L110, L95& ZL-50 V-Mount batteries
Paglight
PAG V-Mount Compatible System
9302AL110 Time
Battery
9702V PAG CUBE4-channel simultaneous
charger featuring IntelligentParallel Charging.
PAG V-Mount batteries canalso be charged using theappropriate Sony charger
Other formats can be chargedvia the front PP90 sockets ofAR124PLD & Quasar chargersusing the appropriate chargeadaptor.
9317ZL-125 Time
Battery
9317VZL-125 Time
Battery
SYSTEMSwww.paguk.com
2
9335AL95 Power
Circle Battery
PAG Batteries are the most technologically advanced in theindustry. They are designed to provide a safe, reliable powersource for most professional requirements. They aremanufactured to withstand the strains and stresses of use in
the harshest environments, and to perform consistently overtheir natural lifetime. PAG Batteries incorporate many uniqueproprietary features designed to assist the cameraman andprolong battery life. PAG means quality.
Quality by DesignPAG uses only the highest quality components in theconstruction of its batteries. Safety, reliability, and durabilityare the prime concerns, from conception to final assembly.
Branded CellsPAG uses premium grade branded cells, which have beenextensively tested to ensure excellent cycle life and capacity.High-quality, branded Li-Ion cells are a vital prerequisite to thecreation of a safe Li-Ion battery. Poor quality cells may developinternal shorts, or their electrolyte may be contaminated,giving rise to further problems. Unfortunately, PAG hasdiscovered that this kind of low-quality cell is being used inbatteries that are branded as professional broadcast products.
The name PAG on a battery is an asurance thatonly high-quality cells and materials have beenused in its construction.
Protective CasesHigh-impact, injection-moulded polycarbonate, or mediumimpact ABS cases are used, which incorporate integral cradlesfor protection of the cell-pack, and non-slip external featuresfor secure handling.
RF ResistancePAG Li-Ion batteries have built-in RF resistance to preventshut-down in the field when used in close proximity to radiotransceivers.
United Nations TestingIt is a legal requirement of air transport andcivil aviation authorities that Li-Ion batteriesbe independently tested to comply withUnited Nations regulations, before they canbe certified ‘air safe’.
Regulations exist because poorly constructed Li-Ion batterieshave been known to break down internally and self-ignite.
PAG Li-Ion batteries are tested and certified tocomply with United Nations specifications.
Each unique Li-Ion battery assembly is issued with a test reportnumber. You should always ask the battery manufacturer for atest report number that relates to the cell-pack assembly, andnot just the individual cells.
Service SupportA PAG customer is able to call upon expert technical adviceand a full back-up service throughout a product’s lifetime. Thequality of service that PAG provides is one of the main reasonswhy broadcast organisations choose PAG (see Page 1).
RecellingInstead of recelling your battery, PAG offers UK customers asubstantial discount (25%) on the price of a new battery ofequivalent or greater specification, including a full warranty.
A cell replacement, by a company other than PAG, is a falseeconomy. It degrades the build standard of the product andleaves you with a battery of dubious quality, and a potentialsafety concern.
RecyclingPAG provides a recycling service for all of its expired batteries.Simply return your batteries by prior arrangement to your PAGAgent, or to PAG Ltd. London. This ensures that the materialsinvolved in their manufacture are recovered for future use,where possible, or disposed of in accordance with theappropriate legislation.
Why Choose PAG Batteries?
No Cell-ImbalanceThe low-resistance inter-cell nickel strapping and cell layout areconstructed to optimize current sharing, reducing one of thecommon causes of cell-imbalance, and prolonging battery life.
Electronic ProtectionPAG Li-Ion batteries have a higher safety standard than those ofother manufacturers. PAG’s electronic protection system guardsagainst: over-voltage, under-voltage, over-current, over-charge,over-discharge, over-temperature, under-temperature andinappropriate charge sources. Each protection feature has atleast one back-up.
Protected CircuitsThe internal circuits of PAG Li-Ion batteries are coated withParylene, the premier conformal coating, to protect circuitsagainst the results of severe mechanical abuse to the cell pack,by making them electrolyte resistant. From a safety viewpointPAG believes this coating to be an essential additional level ofprotection, and yet PAG is the only manufacturer that protects itsbatteries in this way.
Charged for Longer LifeThe key to extended battery life lies in the charging. PAGchargers are the most advanced available. The software thatcontrols the charging process was developed by PAG afteryears of extensive research, and continues to evolve as newcell-chemistries become available.
To ensure the longest possible cycle life PAGbatteries should always be charged with theappropriate PAG charger.
When protected from abusive charging practices PAG L95 TimeBatteries have an average life of 3 years, and are guaranteed for2 years (see Chargers, Pages 12 to 14).
Capacity IndicationPAG’s battery capacity indication technology is unsurpassed.
The PAG Power & TimeDisplay is the industry’s mostaccurate run-time display (seePage 5) and one of the greatadvantages of the PAG L95Time Battery.
The unique 5 LED Power &Time Circle incorporated inthe low-cost PAG L95e batteryalso provides a run-timeindication on-load (see Page 4).
WHY CHOOSE PAG BATTERIES?www.paguk.com
3
7
6
5
4
3
2
1 8
9
10
11
12
13
PAG L95e. Economic & Enhanced.
L95e LI-ION BATTERYwww.paguk.com
4
Switch to a high-quality Li-Ion battery system for less.PAG L95e Low-CostLi-Ion Batteries:
PAG L95e (PAGlok).14.8V 6.5Ah, 95 watt-hours.Model 9310
PAG L95e (V-Mount).14.8V 6.5Ah, 95 watt-hours.Model 9310V
Weights and dimensionssee Page 8.
A second button press activatesthe time display. The ‘HRS’ LEDflashes twice.
The number of hours is indicatedby the number of lit LEDs: 2 LEDs= 2 hours.
The ‘MINS’ LED then flashes twice. The number of minutes is indicated:3 LEDs = 30 mins.
Low-Cost Li-IonAlthough relatively low in cost,compared to the cameras theypower, high-quality Li-Ion batterysystems can appear expensivewhen compared to some of thecheaper options available. However,low-quality Li-Ion batteries can failwithin a year, and provide poorvalue for money. For this reasonPAG has introduced a highlyeconomic Li-Ion battery thatmaintains the high quality andsafety standards for which PAG isrenowned.
Power & Time CircleThe PAG L95e is ideal for those whorequire the benefits of a Li-Ionsystem but not the highly accuraterun-time information provided by thePAG Time Battery (see Page 5).
The L95e incorporates a new display,the PAG Power & Time Circle. Itdisplays charge status in terms ofpercentage, using 5 LEDs. Each LEDrepresents approximately 20% ofavailable capacity. When the batteryis on-load the display will alsoprovide an estimate of remaining run-time. It uses the 5 LEDs to indicatethe remaining hours and minutes.
CompatibilityPAG provides the new L95e Li-Ionbattery in PAGlok and V-Mountcompatible formats.
Capacity in the ViewfinderThe V-Mount L95e, when used topower certain Sony cameras, willprovide a percentage display ofavailable capacity in the cameraviewfinder.
Longer Cycle LifePAG has incorporated many levelsof protection within the L95e toensure that it is one of the safestLi-Ion batteries available. Thesefeatures help prevent the damagingprocesses that reduce capacity,and in combination with proprietarycharging techniques, ensure alonger battery cycle life. PAG is ableto offer an impressive warranty of 18months on the new L95e.
The PAG L95e incorporates qualitybranded cells, and an internal pro-tection circuit coated with Paryleneto protect against the results ofsevere abuse to the cell pack.
No Service ChargeThe new 5 LED display maintains itslevel of accuracy after repeatedpartial discharge cycles, and thebattery does not require a periodic'service charge' to re-establishaccuracy.
Self-RecoveryIf the battery has been shut down byits protection circuit it can berecovered by simply removing it
from the load and pressing thedisplay button, provided the batterystill retains some charge.
ChargingTo achieve the longest cycle lifethe PAG L95e should always becharged using a PAG charger(see Low-Cost Chargers Page 13).PAGlok chargers in the field requirea software upgrade for the L95e.PAG V-Mount chargers are alreadycompatible. The appropriate Sonycharger can be used.
Power & Time Circle Display:
33
PAG Li-Ion Time Batteries.
One of the great advantages of PAG’s Li-Ion Time Battery is thePAG Power & Time Display. This built-in capacity indication andrun-time display was designed and developed by PAG at a timewhen a 4 or 5 LED ‘fuel-guage’ was the best available.
PAG’s revolutionary display provides a prediction of equipmentrun-time, on-load, that is continually updated and accurate to theminute. The battery’s internal processor achieves this taking intoaccount the changes of load that occur during use, the chargestatus and condition of the cells, and the ambient temperature.PAG’s display was the first to achieve this. No other capacityindication device displays equipment run-time this accurately.
The Power & Time Display uses an easy-to-read digital characterformat, and displays remaining run-time on-load, at the press of abutton; hours are displayed first, followed by minutes.
The next button press shows available capacity in Ah (0.1Ahincrements) and a further press shows capacity as a percentage(1% increments).
Capacity indication in ampere-hours and percentage can also bedisplayed when the battery has been removed from theload, providing an accurate charge status at all times. ...followed by percentage.
...followed by minutes.
At the press of a button the PAG Power & Time Displayshows run-time against load...
The original and most accuratebuilt-in battery run-time display.
...in hours...
Available capacity is also displayed...
...in ampere-hours
Why Li-Ion?Li-Ion cell technology possesses ahigh capacity to weight ratio whichmakes it particularly well-suited to
powering the latest professionalbroadcast cameras. PAG Li-IonTime Batteries utilise advanced,high-quality cell technology, whichprovides increased run-time for acamera and light up to 35W.
Two batteries will provide enoughpower for a day’s shooting withmost camera and lighting set-ups.PAG Li-Ion batteries are compactand can be transported easily inyour camera bag. Li-Ion batteries
do not self-discharge as quickly asother cell technologies and can bepartially charged and dischargedwithout causing long term problems.
LI-ION TIME BATTERIESwww.paguk.com
5
The Industry’s most sophisticated batteries.
Higher CapacitiesTodays power-hungry camerasrequire high capacity batteries.The PAG L95 is a 14.8V 6.5Ahbattery that packs 95 watt-hours ofpower. It will run a camera thatconsumes 24W for almost 4 hours.
When longer run-times are requiredthere is the PAG L110, a 14.8V7.5Ah 110 watt-hour pack. The PAGL110 is the same size as the L95and shares the same impact-resistant casing and advancedinternal features. Both models
PAG Li-Ion TimeBatteries:
PAG L95 (PAGlok).14.8V 6.5Ah, 95 watt-hours.Model 9382
PAG L95 (V-Mount).14.8V 6.5Ah, 95 watt-hours.Model 9360
PAG L95 (Snap-on).14.8V 6.5Ah, 95 watt-hours.Model 9383
PAG L110 (PAGlok).14.8V 7.5Ah, 110 watt-hours.Model 9302
PAG L110 (V-Mount).14.8V 7.5Ah, 110 watt-hours.Model 9302V
PAG L110 (Snap-on).14.8V 7.5Ah, 110 watt-hours.Model 9302A
For weights and dimensionssee Page 8.
PAG Time Batteries are compatible with all systems.
incorporate the unique PAG Power& Time Display, which showsremaining run-time, on-load.
One Battery, All SystemsBoth the L95 and the L110 areavailable in models that arecompatible with the three mostpopular mounting systems:> PAGlok> V-Mount (Sony)> Snap-on (Anton-Bauer)PAG is the only manufacturer thatoffers its premier Li-Ion battery inthree formats.
Combined CapacitiesThe capacities of two PAG Li-Ionbatteries, PAGlok or V-Mount, L95 orL110, can be combined to provide ahigher current draw capability, andeven longer run-times, by using thePAG Power Plate.
The Power Plate is available with achoice of connector, making it asystem converter as well as a powermultiplier. The high current-drawcapability is ideal for powering high-definition camcorders and a cameralight. Using two Li-Ion batteries to
share the load and achieve a larger,combined capacity ensures that youdischarge the battery at a lesserrate (see Page 17).
Quality CellsQuality branded cells, such asthose utilised by PAG, are a vitalprerequisite to the creation of a safeLi-Ion battery.
Electronic ProtectionPAG has incorporated asophisticated electronic protectionsystem within its Li-Ion batteries toguard against abusive practicesthat could reduce battery life. Thesystem is in turn protected withParylene, the premier conformalcoating.
Longer Lasting Li-IonThe protection built into PAG Li-Ionbatteries prevents the damagingprocesses that reduce capacity;this, combined with proprietarycharging techniques, ensures alonger battery cycle life.
PAG guarantees its L95 and L110Time Batteries for 2 YEARS.
The average life of an L95 battery is3 years. When you compare this tolower quality imported options,which have been known to fail within
a year, you understand why topbroadcasting organizations andcamera operators choose PAG.
ChargingOne of the benefits of Li-Ion tech-nology is the low self-dischargerate. This means that batteries donot have to be topped up if theyhave not been used for a few days.There is also no ‘memory effect’ asLi-Ion batteries do not suffer longterm problems as a result of partialcharging and discharging.
PAG ChargersTo ensure the longest possiblecycle life PAG Li-Ion batteriesshould be charged with PAGchargers. Two and four channelmodels are available thatincorporate compatible batteryconnectors (see Pages 11 to 14).It is also possible to charge PAGLi-Ion batteries via the front PP90sockets of all-chemistry PAGchargers, using the appropriatecharge adaptor (see Page 15).
PAG V-Mount batteries can becharged using PAG V-Series
chargers or the appropriate Sonycharger.
High Capacity or Long LifeA unique charge facility, within thePAGlok and Snap-on compatiblePAG L95 Time Batteries, provides achoice between extended cycle lifeor high capacity, when chargingwith PAG all-chemistry chargers.
Air TransportationPAG L95 batteries have been testedby an independent test facility,to comply with United Nationsregulations, as required by airtransport and civil aviationauthorities.
There are no restrictions on the airtransportation of PAG L95 batteriesin hand luggage.
(See PAG’s Air TransportationDeclaration on the inside backcover).
NOTE: PAG L110 batteries arecurrently only available to UKcustomers.
LI-ION TIME BATTERIESwww.paguk.com
6
PAG ZL-Series flight-friendly batteries are welcome aboard.Air TransportationCertain airlines have refused to letLi-Ion ENG batteries on-boardaircraft in hand luggage, despitelegitimate air safety certification thatproves compliance with IATAregulations for lithium content andUnited Nations testing. For thisreason, PAG has introducedZL-Series Travel Packs, a range offlight-friendly batteries that containzero-lithium, and are alwayswelcome aboard.
A Choice of CapacitiesThe ZL-Series comprises batterypacks with capacities of approx-imately 150, 125 and 50 watt-hours.Models are available that arecompatible with either the V-Mountor PAGlok formats. In addition thereis also a 40 watt-hour NP1 pack.
Highest Capacity BatteryThe ZL-150 is PAG’s highestcapacity battery and is packaged inPAG’s popular slimline SuperPackformat, rather than the cumbersome‘brick’. Li-Ion batteries of thiscapacity are limited to two units inyour hand luggage, whereas theZL-150 has no such restriction.
In addition to the air transportationbenefits, the PAG ZL-150 is an idealsolution for those who requireextended run-time, and a highercurrent-draw capability.
Zero-Lithium Time BatteryPAG has incorporated its highlyaccurate Power & Time Display intothe 125 watt-hour ZL-125; it is idealfor those who require increasedcapacity and accurate run-timeinformation.
Smaller, Lighter PacksThe ZL-50 is a more compact battery.Its dimensions match those of the PAGL95. It has a capacity of approximately50 watt-hours. The PAG ZL-50 is ableto indicate the state-of-charge bymeans of a four LED display. If thebattery is more than 87% charged allfour LED’s will light, when the displaybutton is pressed. If the battery is lessthan 12% charged none of the LED’swill light.
PAG ZL-Series Batteries:
PAG ZL-150 (PAGlok).14.4V 10Ah, 150 watt-hours.Model 9316
PAG ZL-150 (V-Mount).14.4V 10Ah, 150 watt-hours.Model 9316V
PAG ZL-125 Time Battery (PAGlok).13.2V, 125 watt-hours.Model 9317
PAG ZL-125 Time Battery (V-Mount).13.2V, 125 watt-hours.Model 9317V
PAG ZL-50 (PAGlok).14.4V 3.2Ah, 50 watt-hours.Model 9315
PAG ZL-50 (V-Mount).14.4V 3.2Ah, 50 watt-hours.Model 9315V
PAG ZL-NP (NP1).13.2V 3Ah, 40 watt-hours.Model 9314
Page 8 weights and dimensions
NP1 FormatThe NP1 format ZL-NP, has acapacity of approximately 40 watt-hours and is capable of supplying acontinuous current of 8A, ideal forpowering a camera and lightingsimultaneously. It also features afour-LED state-of-charge indicator.
ZL-Series batteries are compatiblewith PAG All-Chemistry AR Seriesand new V-Series chargers, whichPAG recommends for extendedbattery life (See Pages 11 to 14).
The Latest Ni-MH TechnologyPAG ZL-Series batteries employ thelatest Ni-MH cell-technology, whichhas greatly improved since itsintroduction to the industry approx-
imately a decade ago. Customerscan now expect a longer cycle life,if batteries are always charged withthe appropriate PAG charger.
PAG Zero-Lithium Travel-Packs.
ZL-SERIES BATTERIESwww.paguk.com
7
PAG Batteries.
PAG
lok
PAG L95eLi-Ion BatteryModel 9310V14.8V 6.5Ah, 95Wh
130 x 86 x 47mm / 0.75kg
PAG ZL-150Ni-MH BatteryModel 9316V14.4V 10Ah, 150Wh
208 x 125 x 52mm / 2.35kg
PAG L95Li-Ion Time BatteryModel 938214.8V 6.5Ah, 95Wh
130 x 86 x 42mm / 0.75kg
PAG L95eLi-Ion BatteryModel 931014.8V 6.5Ah, 95Wh
130 x 86 x 42mm / 0.75kg
PAG ZL-150Ni-MH BatteryModel 931614.4V 10Ah, 150Wh
208 x 125 x 44mm / 2.35kg
PAG ZL-125Ni-MH Time BatteryModel 931713.2V, 125Wh
208 x 125 x 44mm / 2.2kg
PAG ZL-50Ni-MH BatteryModel 931514.4V 3.2Ah, 50Wh
130 x 86 x 42mm / 0.88kg
PAG L110Li-Ion Time BatteryModel 9302V14.8V 7.5Ah, 110Wh
130 x 86 x 47mm / 0.75kg
UK only
PAG ZL-50Ni-MH BatteryModel 9315V14.4V 3.2Ah, 50Wh
130 x 86 x 47mm / 0.88kg
PAG ZL-125Ni-MH Time BatteryModel 9317V13.2V, 125Wh
208 x 125 x 52mm / 2.2kg
PAG L110Li-Ion Time BatteryModel 930214.8V 7.5Ah, 110Wh
130 x 86 x 42mm / 0.75kg
UK only
PAG
lokPA
Glok
PAG
lok
PAG
lokPA
Glok
V-Mount
V-Mount
PAG L95Li-Ion Time BatteryModel 936014.8V 6.5Ah, 95Wh
130 x 86 x 47mm / 0.75kg
V-Mount
V-Mount
V-Mount
V-Mount
8BATTERIESwww.paguk.com
Snap
-on
PAG L95Li-Ion Time BatteryModel 938314.8V 6.5Ah, 95Wh
130 x 86 x 52mm / 0.76kg
PAG Batteries at a Glance.
PAG L110Li-Ion Time BatteryModel 9302A14.8V 7.5Ah, 110Wh
130 x 86 x 52mm / 0.76kg
UK only
PAG ZL-NPNi-MH NP BatteryModel 931413.2V 3Ah, 40Wh
71 x 182 x 25mm / 0.73kg
Snap
-on
Snap
-on
NP
1
PAG Ni-Cd Batteries.Nickel-Cadmium batteries, designed for professional broadcastapplications, are not affected by European Union legislation preventingthe sale of Ni-Cd batteries in the EU, which came into effect inSeptember 2008. The legislation includes exemption for Ni-Cd batteriesintended for industrial and military use. For this reason PAG continuesto sell its Ni-Cd battery range. PAG will aim to meet your demand for Ni-Cd batteries, where possible, until Ni-Cd cells are no longer available,or become uneconomic.
The process of developing alternative products for the Ni-Cd range hasalready begun with the introduction of the ZL-Series batteries and Ni-MHPagbelts. These batteries utilise the latest high-capacity, long-life Ni-MHcells, and are capable of providing the higher-currents that new, high-definition cameras require. The new Ni-MH cells are superior to thoseavailable when this technology was first introduced to the BroadcastIndustry. Contact the PAG Sales Department for information about therange of PAG Ni-Cd battery packs and belts.
PAG Batteries.
PAG L95Li-Ion BatteryModel 9335A14.8V 6.5Ah, 95Wh
130 x 86 x 52mm / 0.76kg
PAGlok Batteries
No: Name: Cells: V/Ah: Size (mm): Weight: Charger With Compatibile Connectors: Capacity Indication:
9310 L95e Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 42 0.75kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) Power & Time Circle
9382 L95 Time Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 42 0.75kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) Power & Time Display
9302 L110 Time Battery Li-Ion 14.8V 7.5Ah 130 x 86 x 42 0.75kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) Power & Time Display
9315 ZL-150 Battery Ni-MH 14.4V 10Ah 208 x 125 x 44 2.35kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) Manual Charged/Used
9317 ZL-125 Time Battery Ni-MH 13.2V 125Wh 208 x 125 x 44 2.20kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) Power & Time Display
9316 ZL-50 Battery Ni-MH 14.4V 3.2Ah 130 x 86 x 42 0.88kg AR124PLD (9792), Quasar (9726, 9752), Freelancer (9613) LED Display
PAG V-Mount Compatible Batteries
9310V L95e Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 47 0.75kg Cube (9702V), V4-iPC (9700V), V2 (9613V) Power & Time Circle
9360 L95 Time Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 47 0.75kg Cube (9702V), V4-iPC (9700V), V2 (9613V) Power & Time Display
9302V L110 Time Battery Li-Ion 14.8V 7.5Ah 130 x 86 x 47 0.75kg Cube (9702V), V4-iPC (9700V), V2 (9613V) Power & Time Display
9315V ZL-150 Battery Ni-MH 14.4V 10Ah 208 x 125 x 52 2.35kg Cube (9702V), V4-iPC (9700V), V2 (9613V) Manual Charged/Used
9317V ZL-125 Time Battery Ni-MH 13.2V 125Wh 208 x 125 x 52 2.20kg Cube (9702V), V4-iPC (9700V), V2 (9613V) Power & Time Display
9316V ZL-50 Battery Ni-MH 14.4V 3.2Ah 130 x 86 x 47 0.88kg Cube (9702V), V4-iPC (9700V), V2 (9613V) LED Display
PAG Snap-on Compatible Batteries
9335A L95 Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 52 0.76kg Pulsar (9795), Quasar (9727, 9753) Power Circle Display
9383 L95 Time Battery Li-Ion 14.8V 6.5Ah 130 x 86 x 52 0.76kg Pulsar (9795), Quasar (9727, 9753) Power & Time Display
9302A L110 Time Battery Li-Ion 14.8V 7.5Ah 130 x 86 x 52 0.76kg Pulsar (9795), Quasar (9727, 9753) Power & Time Display
PAG NP1Batteries
9314 ZL-NP Battery Ni-MH 13.2V 3Ah 182 x 71 x 25 0.73kg AR124NPD (9793) LED Display
BATTERIESwww.paguk.com
9
Pagbelt NMH. Battery Belts.
Compact & LightweightThe PAG Power Supply is compactand lightweight and connectsdirectly to the battery mount on therear of your camera.
CompatibilityModels are available that arecompatible with the three mostpopular mounting systems: PAGlok,Sony V-Mount and Snap-on.
Neat and TidyNo cables are required, other thanthe standard IEC power cablesupplied with the unit.
50 Watts of PowerThe PAG Power Supply is capableof providing a full 50W, suitable forpowering most broadcast cameras.It has a universal mains input of 90to 270V, and features an LED power'ON' indicator. The PAG PowerSupply complies with all CE
Model Voltage Capacity
9212 Pagbelt NMH 12V 10Ah
9213 Pagbelt NMH 13.2V 10Ah
9214 Pagbelt NMH 14.4V 10Ah
9224* Pagbelt NMH 24V 10Ah
9230* Pagbelt NMH 30V 10Ah
* Supplied with shoulder harness.
The BenchmarkFor over 30 years Pagbelts havebeen the battery belts against whichall others have been judged.Fashioned from top quality, deepmoulded leather, Pagbelts have areputation for quality and reliability.
QualityDesigned and built under a strictlycontrolled quality assurance system,using quality materials and proventechniques, Pagbelts are guaranteedto give a long and effective servicelife even under the most demandingconditions.
Superior CellsPagbelts now contain the latestNi-MH cells, specially selected fortheir superior quality and excellentrun-time. Ni-MH technology hasgreatly improved since its introduc-tion to the industry approximately adecade ago. Customers can nowexpect a longer cycle life, if thebattery belt is always charged withthe integral overnight charger.
Integral ChargerPagbelts incorporate a fully isolated,integral overnight charger, which isable to accept a Widerange input
supply, from 90V to 250V AC, 50Hz-60Hz enabling worldwide operation.
Over-Discharge ProtectionThe Over Discharge Protection
(ODP) feature is an automatic lowvoltage cut-out facility that preventscell imbalance, the most commoncause of reduced battery cycle life.
XLR-4 OutputPagbelts have an XLR-4 (F) outputconnector and a 10A self-resettingthermal cut-out to protect the batterybelt from accidental short circuit.
Full SupportPagbelt NMH has a quick releasebuckle and fully adjustable strap.The heavier series of belts areprovided with a clip-on shoulderharness, providing added supportand comfort for the wearer duringperiods of demanding activity.
PAG Camera Power Supplies.Directives for EMC and Safety andthe output is fully protected.
Chargers & Power SuppliesAlternatively, PAG Quasar chargersare available that contain powersupply units suitable for runningbroadcast cameras (see Page11).The V4-CPA Camera Power Adaptorcan be used in conjuction with thePAG V4-iPC and Cube chargers todo the same job (see Page12).
Camera Power Supplies
9791 PAGlok Connector160 x 105 x 42mm* / 0.6kg
9791V V-Mount Compatible160 x 105 x 47mm / 0.6kg
9798 Snap-on Compatible160 x 105 x 47mm* / 0.6kg
* Excluding claws or studs
Dual XLR-4 (F) output connectors
10PAGBELT NMH / POWER SUPPLIESwww.paguk.com
Ni-MH and Ni-Cd batteries of otherreputable manufacturers can becharged, as well as Sony & IDXV-Mount Li-Ion batteries.
Variety of FeaturesThe features of each PAG chargervary to include 2 or 4 channels, achoice of battery connector, a camerapower supply or a Dischargeprogram. Batteries which have beenrepeatedly subjected to partialdischarging will benefit from theanalytic Discharge/Charge programwhich also measures and displaysavailable battery capacity.
Recovery ChargeThe Recovery Charge Program canbe used to regain capacity lost as aresult of extended storage or
PAG AR Series 2, Quasar and Pulsar chargers employSequential Charging which can fully charge onebattery a lot quicker than a simultaneous charger.Simultaneous charging distributes current over morethan one battery at the same time, making the processlonger. PAG sequential chargers are so efficient that inmany cases two batteries can be charged faster thanthey can with simultaneous chargers of othermanufacturers.
All models are designed to high electrical standards,with RFI certification, and are suitable for use in allbroadcast environments.
PAG AR124PLDFour-channel AR Series 2Charger/Discharger
PAG AR Series 2 chargers are available with either PAGlokconnectors or NP1 pockets. The PAG Pulsar features Snap-on compatible connectors, incorporating Talk-Circuits, whichallow the charger to display data, recorded by PAG digitalLi-Ion batteries, such as date of manufacture, serial number,Ah loaded, operating capacity, percentage state-of-charge,and battery temperature.
PAG AR Series 2, Quasar & Pulsar charge PAGLi-Ion, as well as Ni-Cd and Ni-MH batteries ofany reputable manufacturer, within the ranges 4.8Vto 14.8V, and 1Ah to 10Ah.
PAG QUASARUltra-compact two-channelcharger (half the size ofthe AR124PLD).
PAG ACS - AdvancedCharging SystemPAG chargers are the most versatileand advanced microcomputer-controlled battery managementsystems in the industry. The PAGACS software that controls thecharging program will extend theworking life of your batteries beyondanything that can be achieved usingother systems.
Automatic Charge-RateSelectionPAG acknowledges the wide varietyof batteries that are available to thecamera operator, in terms of cell-chemistry, voltage and capacity, andhas incorporated revolutionarysoftware in its chargers that providesthe easiest and most efficient way of
managing them. Automatic Charge-Rate Selection detects the battery’scell-chemistry, state-of-charge,capacity and condition, using onlythe battery’s negative and positiveterminals. The charger then appliesthe correct regime to achieve a fullycharged battery with the maximumcapacity and cycle life. The chargerate can be set manually to 2A, 3A,or 4A.
Charge More BatteriesPAG all-chemistry chargers aresuitable for charging PAG Li-Ion,Ni-MH and Ni-Cd batteries within theranges 4.8V to 14.8V,1Ah to 10Ah.The front mounted PP90 socketsenable the charging of other batteryformats, via the appropriate chargeadaptor (see Page 15).
Quasar screen in power supply mode.
operation under adverse conditions.An automatic maintenance charge isapplied to Ni-Cd and Ni-MHbatteries, after full charging, to keepthem in peak condition and ready forinstant use. This program is notrequired for Li-Ion batteries.
Li-Ion RecoveryPAG chargers incorporate a programthat will automatically recover PAGLi-Ion batteries when the output hasbeen shut down by the internalprotection circuit.
Worldwide OperationPAG charging systems automaticallyadjust to operate from AC mainssupplies worldwide.
PAG ACS. Advanced Charging System.
The Quasar incorporates an optional CameraPower Supply that provides a nominal 50Wsuitable for powering most professionalbroadcast cameras. In power supply modethe Quasar displays an accurate digitalbar-graph of power consumption.
All chargers are easy tooperate. Many have largebacklit LCD displays,providing battery voltage andcharge loaded information.
The Quasar is availablewith either PAGlokconnectors or Snap-oncompatible connectors.
PAGLOK SYSTEMPAG Chargers. The secret of longer battery life.
PAGLOK / SNAP-ON / NP1 CHARGERSwww.paguk.com
11
The PAG V4-CPA Camera Power Adaptor is a separate unit thatenables you to power your camera from an AC mains supply, usingthe Cube charger. It is a compact, impact resistant unit that canbe connected to anychannel on the charger.
Connection to the cameracan be made using anXLR-4 male to femaleadaptor lead Model 9450.
The V4-CPA outputs 16.8Vat 5.5A and is suitable foruse with modern broadcastcameras which are capableof being powered using14.4V or 14.8V Li-Ion batteries.
The PAG V4-CPA can only beused in conjunction with thePAG Cube or V4-iPC chargers.
Intelligent ParallelChargingThis high-powered charger iscapable of supplying 6A at 16.8V,approximately 100W. Charging isfast, efficient and fully-automaticthanks to PAG's unique IntelligentParallel Charging. PAG iPCsoftware incorporates threephases:
PAGLOK SYSTEMPAG V-Series Parallel Charger.
PAG Cube Charger
Phase 1 Pre-Charge:Prepares shutdown or deeplydischarged batteries for chargeacceptance.
Phase 2 Testing:Determines the type and state-of-charge of the batteries, and themaximum current that can beapplied.
Phase 3 Charging:The charger then shares thecurrent intelligently between thechannels, briefly addressing themost discharged batteries first,before simultaneously fully-charging all batteries as quicklyand efficiently as possible.
PAG CubeThe PAG Cube is a new, ultra-compact,low-cost, simultaneous fast-charger.It features PAG’s own Intelligent ParallelCharging software, designed for the safefast-charging of V-Mount Li-Ion batteries,of reputable manufacture.
Extend Battery LifeCharging is the most important factor inachieving an extended battery cycle life.PAG L95 Li-Ion batteries are capable ofan average of three years active service,without substantial loss of capacity, whenprotected from abusive charging practices.
V-Mount CompatibleThe Cube features four V-Mount compatiblebattery connectors and can also be used tosequentially fast-charge PAG V-MountZL-Series batteries and other V-MountNi-MH batteries of reputable manufacture.
PAGlok VersionPAG will introduce an all-chemistry PAGlokversion of the 4-channel Cube charger(Model 9702) in the near future.
Excellent ValueValue for money is at the heart of theCube’s conception. Equivalent chargersfrom other manufacturers can cost morethan three times as much.
PAG V4-CPA CameraPower AdaptorInformation Display
The Cube incorporates a backlitLCD screen which indicates at alltimes the status of each channel.
Ideal Location ChargerThe Cube is the ideal locationcharger. It is quiet and cool-running.It has a robust but lightweight
impact-resistant moulded-construction, incorporating analuminium frame. It features astrong, moulded handle thatenables you to carry the chargerwith four batteries connected. Thehandle can be retracted into the lidof the charger when not required, tomaintain the compact dimensionsof the unit.
Future ProofThe charger is capable of receivingfirmware updates via its batteryconnectors, without the need toopen the casing, which is bothconvenient and economic.
Power SupplyThe Cube's power supplytechnology enables the charger tobe powered from any AC powersupply, worldwide.
12PAG V-SERIES CHARGERwww.paguk.com
PAG AR124PLDModel 97924 x PAGlok connectors
4 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
Discharger
PAG
lok
PAG
lokV-M
ount
PAG
lokV-M
ount
PAG QUASARModel 97522 x PAGlok connectors
2 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
Camera Power Supply
PAG QUASARModel 97262 x PAGlok connectors
2 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
PAG FreelancerModel 96132 x PAGlok connectors only
Ni-Cd, Ni-MH & Li-Ion
12 to 14.8V, 1.5 to 10Ah
PAG CUBEModel 9702V4 x V-Mount connectors only
Li-Ion & Ni-MH (PAG & Sony)
Intelligent Parallel Charging
PAG V2Model 9613V2 x V-Mount connectors only
Li-Ion & Ni-MH (PAG & Sony)
DV SOLUTIONSPAG Low-Cost Chargers.
Low-Cost Chargers forLow-Cost BatteriesThe PAG Freelancer and PAG V2are ultra-compact, multi-chemistrylow-cost chargers. They aredesigned to complement PAG’slow-cost L95e batteries, alsoavailable in PAGlok and V-Mountmodels.
> The PAG Freelancer will chargeNi-Cd, Ni-MH and Li-Ion batteries inthe ranges 12 to 14.8V, 1.5 to 10Ah.
> The PAG V2 will charge Li-Ionand Ni-MH batteries made by PAGand Sony.
Compact & LightweightThe chargers feature a tough butlightweight moulded constructionideal for location use. Each modelis slightly larger than a PAG L95battery and will fit easily into yourcamera bag.
PAGlok, V-Mount and NP1Two full-sized battery connectorsare incorporated: PAGlok for theFreelancer and V-Mount for the V2.The Freelancer can be used tocharge NP1 batteries via PAG NP1Charge Adaptor Model 9574.
Li-Ion RecoveryBoth chargers incorporate a programfor the recovery of Li-Ion batteries,when the output has been shut downby the internal protection circuit.
Maximum CapacityAfter full-charge, the Freelancer mayapply a balancing charge, and amaintenance charge to Ni-Cd orNi-MH batteries, to keep them at theirpeak capacity.
Status DisplayComprehensive LED indication ofbattery and charger status is acommon feature. The chargers arefully automatic in operation andconstantly monitor every process.
Worldwide OperationBoth chargers canbe powered fromany AC mainssupply worldwide,or from a vehiclebattery with thePAG DC/DCConverterModel 9774,(see Page 15 ).
PAG Chargers.
PAG
lok
LOW-COST CHARGERSwww.paguk.com
13
NP
1
Snap
-onS
nap-on
Snap
-on
PAG PULSARModel 97954 x Snap-on compatible
4 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
Discharger & Talk-Circuits
PAG QUASARModel 97532 x Snap-on compatible
2 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
Camera Power Supply
PAG QUASARModel 97272 x Snap-on compatible
2 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
PAG AR124NPDModel 97934 x NP1 pockets
4 x PP90 sockets
Ni-Cd, Ni-MH & Li-Ion
4.8 to 14.8V, 1 to 10Ah
Discharger
Chip-Upgrades
PAG chargers are forward compatible. Older models can be upgraded tocharge new batteries by purchasing a chip upgrade kit.
PAG AR Series 2 Chip-Upgrade for 9792, 9793, 9794 and 9795 (green oryellow labels) for charging all PAG Li-Ion batteries, including L95e.Model 9670E
Quasar Chip-Upgrade for charging PAG L95e batteries.Model 9670QE
PAG Chargers.
PAG Chargers at a Glance.No: Name: Connectors: Connectors: Size: Weight: Special Features:
9792 PAG AR124PLD 4 x PAGlok connectors 4 x PP90 82 x 168 x 240mm 1.23kg Discharge Program
9752 PAG QUASAR 2 x PAGlok connectors 2 x PP90 72 x 135 x 185mm 0.88kg Power Supply
9726 PAG QUASAR 2 x PAGlok connectors 2 x PP90 72 x 135 x 185mm 0.88kg
9613 PAG Freelancer 2 x PAGlok connectors - 55 x 115 x 135mm 0.41kg
9702V PAG Cube 4 x V-Mount Connectors - 157 x 157 x 157mm 1.19kg Intelligent Parallel Charging
9613V PAG V2 2 x V-Mount Connectors - 72 x 112 x 133mm 0.43kg
9793 PAG AR124NPD 4 x NP1 pockets 4 x PP90 78 x 142 x 240mm 1.07kg Discharge Program
9795 PAG PULSAR 4 x Snap-on compatible 4 x PP90 82 x 168 x 240mm 1.23kg Discharge Program & Talk Circuits
9753 PAG QUASAR 2 x Snap-on compatible 2 x PP90 80 x 135 x 185mm 0.84kg Power Supply
9727 PAG QUASAR 2 x Snap-on compatible 2 x PP90 80 x 135 x 185mm 0.84kg
PAG 24V to 30V Ni-Cd Chargers.PAG continues to manufacture 30V AR Series chargers optimised forcharging 24V to 30V Ni-Cd batteries. They are available in single orfour-channel models and incorporate XLR-4 (M) connectors.
Contact the PAG Sales Department for information about PAG 30V ARSeries Chargers.
V-Mount
PAG V4-CPAModel 9701VCamera Power Adaptor
For use with PAG Cube andV4-iPC chargers
Outputs 16.8V at 5.5A
Requires Model 9450 XLR-4male to female connector.
14CHARGERSwww.paguk.com
Intelligent V-MountCharge AdaptorModel 9610Incorporating circuits required forcharging all Sony Li-Ion batteries viathe front PP90 (2.1mm) sockets of PAGAR Series 2, Pulsar and Quasarall-chemistry chargers.
76 x 50 x 25mm / 66g
PAG Charging Adaptors.
V-Mount Charge AdaptorModel 9617Charge Adaptor for PAG V-Mountcompatible batteries, for charging viathe front PP90 (2.1mm) sockets of PAGAR Series 2, Pulsar and Quasarchargers.
76 x 50 x 25mm / 66g
NP1 Charge AdaptorModel 9574Enables the charging of NP1batteries (Ni-Cd, Ni-MH or Li-Ion)from the PAGlok connectors of thePAG Freelancer charger.
NP1 Pocket to PAGlok Connector.
NP1 Power AdaptorModel 9632Utilises NP1 format batteries forpowering Radio MicrophoneReceivers. The unit incorporates4 auxiliary switched outputs, andover-current protection.
NP1 pocket to SQN-4S connector.
PAG 12V AR SeriesPAG MC124Pagbelt integral charger
Vehicle Battery Power ConverterModel 9774This DC/DC Converter enables you to power a PAGcharger from your vehicle’s battery via the cigar lightersocket.
111 x 60 x 30mm / 500g
Suitable for use with the following PAG chargers:
PAG AR Series 2PAG FreelancerPAG QuasarPAG Pulsar
CHARGING ADAPTORSwww.paguk.com
15
ADAPTORS PAG Battery Mounts and Adaptors.Battery Mounts and AdaptorsThe PAGlok battery mounting system was first developed as an alternativeto the Anton-Bauer system, in the days when portable electronic videocameras were in their infancy. The range of PAGlok Connectors grew asnew cameras and ancillary equipment were introduced. Adaptors thatprovide compatibility between the Anton-Bauer and PAG systems have
always been available from PAG. Now that Sony’s V-Mount system hasbeen widely adopted, PAG provides its own version of the V-Mount batteryconnector for use with a wide range of cameras and equipment. PAG alsoprovides adaptors that allow compatibility between Sony and PAGproducts, including the PAG Snap-on range of batteries.
PAGlok ConnectorModel 9522/-The PAGlok Connector provides asecure mechanical and electricalconnection between the battery and thecamera. Features of the PAGlokConnector include a PP90 (2.1mm DC)socket to enable the powering of acamera light.
V-Mount to PAGlokAdaptorModel 9522/64Adapts the Sony V-Mount for usewith all PAGlok batteries.
Model 9522/58Adapts the Sony V-Mount for usewith lighter PAGlok batteries.
PAGlok to Snap-onAdaptorModel 9517Adapts the PAGlok connectorfor use with PAG Snap-oncompatible batteries.
PAGlok to V-MountAdaptorModel 9512Adapts the PAGlok Connector foruse with V-Mount batteries.
PAG V-Mount ConnectorModel 9522VThe PAG V-Mount Connector provides asecure mechanical and electricalconnection between the battery and thecamera.
Snap-on to PAGlokAdaptorModel 9518Adapts the Anton-Bauer Snap-oncamera mount for use with PAGlokbatteries.
PAGlok Belt ClipModel 9522/60A PAGlok Connector thatclips onto your trouser belt.Incorporates 2 x PP90(2.1mm DC) sockets forpowering a camera light anda 7.2V camcorder via a 12VDC Adaptor (see Page 23).
V-Mount to Snap-onAdaptorModel 9511Adapts the Sony V-Mountconnector for use with PAGSnap-on compatible batteries.
Snap-on to V-MountAdaptorModel 9510Adapts the Anton-Bauer Snap-oncamera mount for use with V-Mountbatteries.
16BATTERY MOUNTSwww.paguk.com
BATTERIES
14
PAGlok Power ModuleThe PAGlok Power Module is acompact, lightweight unit designedto supply continuous power fromtwo PAGlok batteries for editingequipment, remote cameras ormicrowave links.
PAGlok batteries of any chemistry,capacity and state-of-charge canbe used. Output is via an XLR-4socket. A third power source, suchas a Pagbelt can be connected viathe XLR-4 input socket.
Two Power Modules can be linkedto provide seamless power from upto five power sources. Model 9663features a regulated 7.2V output anda carrying strap is provided witheach model.
PAGlok Power Module12 to 14.4V135 x 115 x 55mm / 410gModel 9661
PAGlok PowerbeltA belt-mounted series/parallel unitfor use with PAGlok batteries.Output is via 1 x XLR-4 socket.Model 9527
PAGlok BatteryCarrying BeltA convenient way of carrying twoPAGlok batteries to provide off-camera power for a range ofapplications.Model 9523
Radio MicrophoneReceiver HoldersDesigned for use with cameras fittedwith the PAGlok connector (notincluded), to enable the mounting ofa radio microphone receiver.
In most cases the holder is fittedbetween the battery mount and thecamera whilst allowing the routing ofany fixed wires through a centralaperture.
Receivers are held on a left or rightside-facing plate, with velcro straps.Kits which enable the mounting oftwo receivers, and kits for use withthe V-Mount to PAGlok adaptor arealso available.
Model 9620 Left side-facing KitModel 9621 Right side-facing KitModel 9622 Dual KitModel 9623 For use with PAGlok toV-Mount Connectors Models 9522/58 & 9522/64.
PAG Dual Battery Mounts for All Systems.
PAGlok Related Accessories.
For use with PAGlok to V-MountConnectors Models 9522/58 &9522/64.Model 9623
Left side-facing KitModel 9620
Right side-facing KitModel 9621
Dual KitModel 9622
PAGlok Power Module12 to 14.4V / 7.2V135 x 115 x 55mm / 410gModel 9663
Connecting LeadModel 9664
Series/ParallelPower ModuleThis series/parallel unit can be usedto connect two PAGlok batteries inseries; it produces an output voltageequal to the sum of the two batteries’individual voltages (up to 30V), forapplications such as poweringlighting or microwave links.Connecting the batteries in parallelproduces a capacity equal to thesum of the two batteries’ individualcapacities (up to 14Ah, for extendedequipment run-time). This modeprovides continuous operation.Output is via 1 x XLR-4 socket.Model 9581
PAGlok Power Plates
For PAGlok L110s, L95s & ZL-50s
Model 9551 PAGlok Mount
Model 9552 Snap-on Mount
Model 9553 V-Mount
V-Mount Power Plates
For V-Mount L110s, L95s & ZL-50s
Model 9551V PAGlok Mount
Model 9552V Snap-on Mount
Model 9553V V-Mount
The PAG Power Plate is a dualbattery mount that enables twoPAG L110, L95 or ZL-50 batteries(PAGlok or V-Mount) to be used inparallel, providing a combinedcapacity, and a higher current-drawcapability.
It is compatible with the three mostpopular mounting systems: PAGlok,V-Mount, and Anton-Bauer.
The combined capacity is ideal forpowering a camcorder and cameralight simultaneously for extendedperiods.
Combining the capacities of two 95watt-hour Li-Ion batteries is prefer-able to using one higher capacitybattery because sharing the loadensures that you do not discharge asingle battery at an excessive rate.Additionally, civil aviation and airtransport regulations state that nomore than two batteries, havingcapacities greater than 100 watt-hours, can be taken on boardaircraft, whereas there is norestriction on the number of L95s.
The combined weight of the PowerPlate and two L95s is 1.87kg, lessthan a single Ni-Cd SuperPack ofthe equivalent voltage. This weightis an ideal counterbalance for theweight of the lens.
The Power Plate incorporates acharge-status indicator that relatesto the voltage output of the batteriesconnected.
Models for cameras fitted with theSony V-Mount incorporate a PP90socket for powering the Paglight.
POWER PLATE / PAGLOK SYSTEMwww.paguk.com
17
PAGLIGHT
17
Used throughout the worldby news broadcastingorganisations, Paglights arethe ultimate in camera lighting.The original 12V Paglight wasthe first on-board camera lightdesigned specifically to meet therequirements of the broadcastindustry. PAG now offers a familyof lights, designed to fulfil a varietyof professional requirements, butsharing many of the unique featuresthat made Paglight the industrystandard.
Paglights are robust, light in weight,cool-running and fully-focusable.Their versatility has been achievedas a result of PAG’s patented plug-in lamp holder feature. This is bestillustrated in the original 12Vprofessional Paglight which iscapable of both tungsten halogenand metal-halide arc light output.Plug-in lamp holder options for thislight also include Softstart, for usewith Li-Ion batteries, and the power-saving, regulated PowerMax unit,which incorporates a dimmingfacility called VariLux (see Page 19).
Paglight M was introduced to suitthe dimensions of the smaller,digital camcorders. This miniatur-ised version of the 12V Paglight canbe powered from a range of 12V to14.8V battery packs and belts.The plug-in PowerArc option makesPaglight M the industry’s mostcompact yet powerful arc light.A Softstart lamp holder is also
available for use with Li-Ionbatteries. Paglight M can bemounted to the camera using avariety of detachable power bases(see Page 23).
For small camcorder users, whetherprofessional or consumer, thePaglight C6 Kit is an ideal solution.This self-contained, high-quality 6Vsystem provides everything youneed - Paglight, diffuser, dichroic,barndoors, battery and charger at aprice to suit any equipment budget(see PAG DV Solutions Book).
Paglight L is a 250W ‘basher’ orfill-light, available in 24V and 30Vmodels. It is the perfect hand-heldlocation light with many features ofPAG’s original on-board cameralight: quick and easy lampchanging, detachable power baseand a range of accessories (seePage 25).
LED Technology is improving all thetime, addressing many of theproblems that early examplesdisplayed, such as poor spectraldistribution and colour temperature.Using improved LED technologyPAG intends to offer a plug-in LEDoption for the Paglight, to furtherincrease its versatility and provideyou with the most economical LEDsolution.
PAGLIGHT Paglight. The Industry Standard.
Paglight MMiniaturised version of the 12VPaglight for use with smallerdigital camcorders. Featuresdetachable power base(Page 23).> Reflector: 35mm dia.
Paglight C6An all-inclusive 6V lighting kit,incorporating 6V battery andcharger, designed for use withsmall camcorders (see PAG DVSolutions Book).> Reflector: 35mm dia.
Paglight LA 250W hand-held locationfill-light or ‘basher’ availablein 24V and 30V models(Page 25).> Reflector: 60mm dia.
PaglightThe original halogen or arc12V broadcast camera light.Features detachable powerbase. Still the most versatile lightin the industry (Page 19).> Reflector: 45mm dia.
18PAGLIGHT FAMILYwww.paguk.com
18
PAGLIGHT
Registered Design No. 2071515 Patent No. 2335027
Paglight is the coolest running light in the business
Paglight. The world’s most versatile camera light.
Plug-in PowerArc
Detachable power base
Paglight is a revolutionary cameralight, the first specifically designedto suit professional ENG/EFPrequirements, and answer the manyrequests for an all-embracing, singleoperator camera light.
PAG's unique patented designmakes Paglight the coolest runningand most versatile camera light inthe industry. Interchangeable plug-inlamp holders fit into the back of thelamp body. Variants of wattage andunit type can be exchanged withouthandling the lamp.
There are four lamp holder options,three of which accept standardbi-pin halogen lamps.
Standard Lamp HolderAccepts 20W, 35W, 50W, 75Wand 100W halogen lamps.
SoftstartLamp HolderPrevents the coldlamp start-up surge fromactivating the over-currentprotection circuits within Li-Ionbatteries. (Not required when usingthe lamp output on a Sony camera).
PowerMaxControl/VariLuxA voltage regulatedunit that prolongs batteryrun-time and saves lampfilament life. VariLux is a lamp
dimming facility which alsoconserves battery power.
PowerArcPaglight can beinstantly convertedto HMI by pluggingin the PowerArc unit.The arc lamp consumesonly 24W but provides theequivalent of 100W of daylightoutput. The ability to convert fromhalogen to HMI makes the Paglightthe industry’s most versatile cameralight.
Fully FocusablePaglight is continuously focusablewith a beam angle that is variable
from spot to flood. It has a soft,even spectral distribution
RotatableAccessory KitThis accessoryholding ring holdsany combination ofsnap-in barn doors(tapered or parallel),dichroic filters or diffuser and can befitted to the front of the light.The assembly can be rotated easilyto give the desired configuration.
Softlight Diffuser & Filter KitThis filter holding assembly fits ontothe barndoors and enables you tocreate supersoft lighting or specialeffects with colour filters.
Paglight Power BasesLow-profile, pre-wired, hot-shoepower bases enable the Paglight tobe easily and quickly mounted to, orremoved from the camera. Powerbases are available with a variety ofconnectors, such as PP90, XLR-4,Snap-on or SX (D-Tap) and a varietyof lead lengths,suitable for usewith mostprofessionalcameras andpower sources.
PAGLIGHTwww.paguk.com
19
19
Paglight Options.
Paglight SXModel 9966> SX Power Base with D-Tap connector
(lead length 150mm) for use withlight output on Sony camera
> Includes Standard halogen lampholder (Sony camera has Softstartfunction for use with Li-Ion batteries)
> 20W or 35W lamps required
> Lamps and filter ring sold separately
> Includes Stud Adaptor & Shoe Plate
Paglight PP90 (Softstart)Model 9944> PP90 Power Base (lead length 500mm)
for use with 2.1mm light output onPAGlok Connector
> Includes Softstart halogen lamp holdersuitable for use with Li-Ion batteries
> For use with 20W or 35W lamps only
> Lamps and filter ring sold separately
> Includes Stud Adaptor & Shoe Plate
SOLD SEPARATELY (see Page 21):20W, 35W 50W, 75W and 100W halogen lampsRotatable Accessory Kits (diffuser, dichroic filter and barndoors)PowerArc Unit and Arc lampLamp ProtectorsSoftlight Diffuser and Filter KitUniversal mounting options (see Page 26)
Paglight Snap-on (Softstart)Model 9945> Snap-on Power Base with D-Tap connector
(lead length 500mm) for use with light outputon Anton-Bauer battery mount
> Includes Softstart halogen lamp holdersuitable for use with Li-Ion batteries
> For use with 20W or 35W lamps only
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight XLR-4Model 9956> XLR-4 Power Base (lead length 1.5m)
for use with XLR-4 output on Pagbeltsor Powerman batteries
> Standard halogen lamp holder
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight XLR-4 (PowerMax)Model 9947> XLR-4 Power Base (lead length 1.5m) for
use with XLR-4 output on Pagbelts orPowerman batteries
> Suitable for use with Ni-MH or Ni-Cd batteries
> PowerMax halogen lamp holder providesdimming facility and voltage regulation forlonger battery run-time
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight PP90 (PowerMax)Model 9946> PP90 Power Base (lead length 500mm) for
use with light output on PAGlok Connector
> Suitable for use with Ni-MH or Ni-Cdbatteries
> PowerMax halogen lamp holder providesdimming facility and voltage regulation forlonger battery run-time
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight PP90Model 9964> PP90 Power Base (lead length 500mm)
for use with 2.1mm light output on PAGlokConnector
> Standard halogen lamp holder suitable foruse with Ni-MH or Ni-Cd batteries
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight Snap-onModel 9965> Snap-on Power Base with D-Tap connector
(lead length 500mm) for use with lightoutput on Anton-Bauer battery mount
> Standard halogen lamp holder suitable foruse with Ni-MH or Ni-Cd batteries
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
Paglight Snap-on (PowerMax)Model 9948> Snap-on Power Base with D-Tap connector
(lead length 500mm) for use with lightoutput on Anton-Bauer battery mount
> Suitable for use with Ni-MH or Ni-Cd batteries
> PowerMax halogen lamp holder providesdimming facility and voltage regulation forlonger battery run-time
> Lamps and filter ring sold separately
> Includes Stud Adaptor and Shoe Plate
20PAGLIGHT OPTIONSwww.paguk.com
9963 TaperedBarn Doors
9951 Dichroic Filter(halogen to daylight)
9973 PowerArcConversion Filter
(daylight to halogen)
9955 PowerArc(includes Lamp Protector)
9967 Arc Lamp
9983 Softlight Diffuserand Filter Kit for ultra-softor colour lighting effects.Comprises:2 x Filter holders2 x Softlight diffusers2 x Full CT blue filters2 x Half CT blue filters2 x Half CT orange filters(See price list for ModelNos. of individual parts).
9952Diffuser 9953
RotatableAccessory Holder
(ring only)
9958 PowerMax/VariLux(includes Lamp Protector)
9938 Softstart(includes Lamp Protector)
9950 Standard Lamp Holder(includes Lamp Protector)
9962 Sony SX Power Base (150mm)
9968 Lamp Protector9930 20W Lamp
9931 35W Lamp
9912 50W Lamp
9932 75W Lamp
9911 100W Lamp
9969 Wattage Label KitColour coded wattageidentification labels forStandard Lampholders
9987 Base Locking Adaptor
9961 Snap-on Power Base (500mm)
9957 PP90 Power Base (500mm), 9943 (1m), 9986 (150mm)
9960 XLR-4 Power Base (1.5m)
9959 RotatableAccessory KitComprises: Ring,Dichroic, Diffuser& ParallelBarn Doors
GY6.35 12V Lamps
Registered Design No. 2071515, Patent No. 2335027
9954 ParallelBarn Doors
PAGLIGHTPaglight System.
9991
9994
9992
9995
PAG Power-to-Light Adaptors
9991 PAGlok Connectorto Paglight
9994 PAGlok Connectorto Paglight M
9992 Snap-on compatibleconnector to Paglight
9995 Snap-on compatibleconnector to Paglight M
Power-to-LightAdaptorsThese useful accessoriesenable you to power aPaglight or a Paglight Mwith a PAGlok or Snap-oncompatible battery.A convenient, alternativeway of powering andpositioning an additionallight source on location.
> See Universal Mounting Options on Page 26.
PAGLIGHT SYSTEMwww.paguk.com
21
Paglight Kits are supplied in a fittedflight case and comprise:
> Paglight (12V).
> XLR-4 Power Base(lead length 1.5m).
> Standard Lamp Holder> A choice of 2 lamps (20W, 35W,
50W, 75W or 100W).
> Rotatable Accessory Kitcomprising: 1 accessory ring,1 pair of parallel barn doors,1 dichroic filter and 1 diffuser.
> Pagbelt NMH with integralovernight charger and a powerlead suitable for country of use(not shown). There is a choice of12V or 13.2V 10Ah Pagbelts.
> Handle.> Camera shoe plate 1/4” Whit.> Stud adaptor 1/4” Whit.
Paglight PowerArc Field Kit.
PAGLIGHT KITS
21
The Paglight PowerArc Field Kitcomprises:
A Paglight 12V.
B Choice of Power Base(PP90, D-Tap or XLR-4).
C Standard lamp holder(with choice of lamp 20W,35W, 50W, 75W or 100W).
D Standard lamp holder andprotector (with choice of lamp).
E PowerArc Unit and protector(with arc lamp).
F Rotatable Accessory Kitcomprising: accessory holder,1 pair of parallel barndoors,1 dichroic filter and 1 diffuser.
G Tapered Barndoors.
H PowerArc Conversion Filter.
I Handle 1/4” Whit. bush / stud.
J Camera Clamp 1/4” Whit. bush.
K Camera Shoe Plate 1/4” Whit.
L Stud Adaptor 1/4” Whit.
M Fitted Flight Case.
N Storage space for additionalcomponents.
Paglight Kits incorporating Pagbelt NMH.
E
H
J
I
M
K L
D
G
N
N
B
F
A
C
Paglight Kits are designed toprovide everything required for alighting source that can be usedeither on or off camera.
The Paglight incorporates a standardhalogen lamp holder and a choice of2 bi-pin halogen lamps (20W, 35W,50W, 75W or 100W). The light isfitted with a professional accessoryholder that includes a daylight filter,a diffuser and two parallel barndoors. A handle is included for off-camera use. A stud adaptor and acamera shoe plate are included formounting the light to the camera.The XLR-4 Power Base enables thePaglight to be powered from thebattery belt supplied.
The Pagbelt NMH battery belt is a10Ah power source, available in 12Vor 13.2V formats, ideal for poweringlights of up to 100W. It incorporatesan integral overnight charger.
Paglight PowerArc Field Kitincorporates the PAG PowerArc HMIunit and two standard halogen units,enabling you to take full advantageof the unique plug-in lamp holdersystem that makes Paglight theindustry’s most versatile cameralight. Converting the Paglight fromhalogen to Arc takes a matter ofseconds.
The kit is tailored to your require-ments with a choice of Power Base,suitable for the light ouput on mostcameras (PP90, D-Tap or XLR-4),and a choice of two halogen lamps(20W, 35W, 50W, 75W or 100W).
The light is fitted with a rotatableaccessory holder that includes adaylight filter, a diffuser and twoparallel barn doors. A dichroic filterthat converts the light output tomatch halogen is included for usewith the PowerArc.
A stud adaptor and a camera shoeplate are included for mounting thelight to the camera. A CameraClamp is included for mounting thePaglight to a camera handle, or off-camera. A handle is included forhandheld use.
The components are housed in astrong, lightweight and compactfitted flight case.
Paglight PowerArc Field Kit
Model Size Weight
9825 468 x 386 x 109mm 3kg
22PAGLIGHT KITSwww.paguk.com
greater than anything that can beachieved using LED lights, and yetthe power consumption is relativelylow.
HalogenBoth halogen lamp holders utilise10W, 20W and 35W standard G4-size 12V halogen lamps. Wattagevariants can be changed without theneed to handle the lamp. When notin use, each lamp holder can bestored in a heat-resistant polymerlamp protector. Lamp holders aresupplied with wattage identificationlabels.
SoftstartSoftstart prevents the cold lampstart-up surge from activating theover-current protection circuits withinLi-Ion batteries.
RotatableAccessoryRingA rotatableaccessory ringincluding snap-inbarn doors, adichroic filter, and adiffuser, can be fitted tothe front of the light.
Softlight Diffuser andFilter KitThis useful accessory fits onto thebarndoors and enables you tocreate super-soft lighting or specialeffects with colour filters.
PaglightPower BasesPaglight Mincorporates ahot-shoe typepower base with a flying lead.A variety of connectors is available,suitable for most camcorders. Thepower base features a 1/4” Whit.thread. This allows the unit to bemounted to the camera via a varietyof universal mounting options(see Page 26).
PAGLIGHT M
22
Paglight M. 12V miniature camcorder light.
Ultra-CompactThe Paglight M is an ultra-compact12V light that embodies manyfeatures of the larger Paglight.It has a 35mm reflector andmeasures 90mm from front to back.Its reduced proportions complementperfectly the new generation ofsmaller broadcast digitalcamcorders, as well as DV andhigh-definition hand-heldcamcorders.
Cool-RunningPaglight M is constructed from aglass-reinforced engineering
polymer that provides strengthand temperature stability. PAG’spatented design ensures thePaglight M is cool-running at alltimes.
Fully FocusableThe PowerArc produces a soft,clean and even spectral distributionwhich is fully-focusable, from spotto flood.
Plug-in Lamp HoldersThe plug-in lamp holder systemmakes lamp changing quick andeasy. A choice of standard halogen,
Softstart or PowerArc lamp holdersis available.
Daylight PowerThe PowerArcenables thePaglight M to beinstantly convertedfrom halogen into theworld’s most compact yet powerfulmini-HMI camera light. ThePowerArc utilises a 24W lamp whichhas an output equivalent to 100W ofhalogen light, but at daylight colourtemperature. The quality andprojection of the light output is far
PAG has designed a range of 12VDC Adaptors for use with DV andHDV hand-held camcorders. TheDC Adaptor enables the camcorderto be powered by 12V to 14.8V
12V DC Adaptors.professional battery packs or belts,providing a higher current-drawcapability and extended run-time.It is also possible to power a 12VPaglight M from the same powersource.
The DC Adaptor connects to thebattery port of the camcorder andthe chosen power output source:either the PP90 (2.1mm DC) powerport of a PAGlok Belt Clip, or theXLR-4 (M) output of a Pagbelt NMHbattery belt. Both power sourcescan be worn around the waist orattached to a tripod.
PAGlok Power Adaptors are PAGlokConnectors that incorporate a built-
in 12V DC Adaptor suitable forpowering certain camcorders.
These adaptors are mounted tothe back of the camcorder.
Model Camcorder Connector
9680/01 Canon XL1, XL2 PP90
9680/02 Sony DSR 200 PP90
9680/03 Sony PD150, PD170, A1 PP90
9680/04 Panasonic AG-DVX100, HVX200 PP90
9680/05 Sony HDR-FX1-Z1 PP90
9655/01 Canon XL1 XLR-4
9655/02 Sony DSR 200 XLR-4
9655/03 Sony PD150, PD170, A1 XLR-4
9655/04 Panasonic AG-DVX100, HVX200 XLR-4
9655/05 Sony HDR-FX1-Z1 XLR-4
9522/75 JVC HD100 PAGlok Power Adaptor
9522/77 Canon XL-H1 PAGlok Power Adaptor
PAGLIGHT Mwww.paguk.com
23
23
9016 StandardLamp Holder
(Lamp protector &wattage labels)
9017 Softstart Lamp Holder(Lamp protector & wattage
labels)
9018 12V 10W
9019 12V 20W
9020 12V 35W
G4 12V Lamps
9021 LampProtector9008 Accessory
Holder (ring only)9010 Diffuser9011 Barn Doors
(pair)
9013 XLR-4 Power Base (1.5m)
9012 PP90 Power Base (500mm)
9015 SX Power Base (150mm)
9014 Snap-on Power Base (500mm)
9007 RotatableAccessory KitcomprisesAccessory Holder,1 pair of Barn Doors,1 Dichroic Filter and1 Diffuser
Paglight M PP90Model 9001
For use with Ni-MH PAGlok batteries.Softstart Lampholder shouldbe used with Li-Ion batteries.
PP90 Power Base (500mm) Shoe Plate Stud Adaptor
StandardLampholder
Paglight M XLR-4Model 9002
For use with camcorders thatincorporate an XLR-4 output,or to power from a Pagbelt NMH.
XLR-4 Power Base (1.5m) Shoe Plate Stud Adaptor
StandardLampholder
Paglight M Snap-onModel 9003
For use with the Snap-on mount, andNi-MH batteries. Softstart Lampholdershould be used with Li-Ion batteries.
Snap-on Power Base (500mm) Shoe Plate Stud Adaptor
StandardLampholder
SX Power Base (150mm) Shoe Plate Stud Adaptor
StandardLampholder
Paglight M SXModel 9004
For use with the Sony SX camera.
SOLD SEPARATELY (see below):Softstart lamp holders10W, 20W & 35W halogen lampsRotatable Accessory Kits (diffuser, dichroic filter and barn doors)Softlight Diffuser and Filter KitUniversal mounting options (see Page 26)
9983 Softlight Diffuserand Filter Kit forultra-soft or colourlighting effects.
Comprises:2 x Filter holders2 x Softlight diffusers2 x Full CT blue filters2 x Half CT blue filters2 x Half CT orange filters
(See price list for ModelNos. of individual parts).
Paglight M Options and System.
Paglight M PP90Model 9001L
For use with Ni-MH PAGlok batteries.Softstart Lampholder shouldbe used with Li-Ion batteries.
PP90 Power Base (1.5m) Shoe Plate Stud Adaptor
StandardLampholder
9009 Dichroic Filter9023 PowerArc
Conversion Filter
9022 PowerArc
9025 PowerArcLamp
> See Universal MountingOptions on Page 26.
24PAGLIGHT M OPTIONS / SYSTEMwww.paguk.com
Location BasherThis compact and portable 250Whand-held fill-light is available in24V and 30V models, andincorporates many features ofPAG’s on-board camera light.
Fully-FocusableFocusing is provided by a leversituated on the side of the lampbody and is continuously variablefrom narrow to wide angle.
Plug-in LampholdersA lampholder unit plugs into therear of the light and is locked inposition. It can be easily withdrawn,making lamp replacement safe andquick.
Heat DissipationThe lamp body and reflectorhousing are constructed tomaximise the dissipation of heat aswell as to provide strength andimpact resistance.
Paglight L24Model 9031
Paglight L30Model 9032
XLR-4 Power Base (1.5m) XLR-4 Power Base (1.5m)
30V 250WLampHolder
24V 250WLampHolder
> Accessory Kit, handle, lamp protector and lamps are sold separately.
250W Paglight Options
Paglight 250W Kits:
Comprise: Paglight, XLR-4 power base (lead length 1.5m), plug-in lamp holder,accessory ring, diffuser, dichroic filter, parallel barn doors (pair), handle,2 x 250W lamps, Pagbelt NMH with integral overnight charger, AC power leadfor country of use and fitted flight case.
Paglight L24 Kit (24V 10Ah Pagbelt NMH)
Paglight L30 Kit (30V 10Ah Pagbelt NMH)
250W Paglight Kits Incorporating Pagbelt NMH.
PAGLIGHT LPaglight L. 250W hand-held location lighting.
Perfect PositioningThe lamp body has a multi-directional mounting and may beadjusted vertically and horizontally.The desired position can bemaintained by a locking leversituated on the side of the lightbase.
Detachable Power BaseThe 250W Paglight has adetachable power base thatincorporates a lead terminated withan XLR-4 connector. This can beused to power the light from aPagbelt NMH battery belt.Paglight L Kits are available thatinclude either a 24V or 30V Pagbelt(see below).
The Paglight base incorporates a 1/4” Whit bush which enables thelight to be mounted to a tripod or ahandle using one of the UniversalMounting Options (see Page 26).
24V or 30V 250W Paglight L.
24V or 30V 10Ah Pagbelt NMH isthe ideal power source for the 250WPaglight L.
PAGLIGHT L 250Wwww.paguk.com
25
9971Stud Adaptormale to male
1/4” Whit.
9972Camera
Shoe Plate1/4” Whit. 9807 Camera Clamp
bush 1/4” Whit.Clamps the Paglight to
the handle of the camera.
9906Handle stud tobush1/4” Whit.(length 127mm)
Universal Paglight Mounting Options.These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip
9990 Extender Arm 1/4” Whit.Lifts the Paglight clear of the microphone,
and allows the subject to be lit from the side.Includes shoes for Sony and Panasonic mounts.
9985Spigot Adaptor
1/2” dia. to1/4” Whit.
9977Multi-Configuration Spigot
Adaptor: 5/8", 1/2" and1/4” dia. in-line or 90°
conversion.
9976Spigot Pin5/8” dia. to1/4” Whit.
9975Spigot Pin1/2” dia. to1/4” Whit.
9974Thread Adaptor
3/8” dia. to1/4” Whit.
9039 24V Lamp Holderand Protector
9913 24V 250W lamp
9960 XLR-4 Power Base (1.5m)
9038Tapered Barn Doors (pair)
9036 Diffuser 9035 Dichroic Filter
9037Parallel Barn Doors (pair)
9033 Rotatable Accessory Kit:Ring, Diffuser, Dichroic andParallel Barn Doors
9034Accessory Holder
(ring only)
9040 30V Lamp Holderand Protector
9914 30V 250W lamp
See Universal Mounting Options below
9990 Paglight Extender Arm.Enables you to position thecamera light to the side of thesubject or away from themicrophone to avoid the castingof shadows.
MOUNTING OPTIONS
25
Paglight L24 & L30 System.
9978 Mounting Adaptor Kit: comprises9971, 9974, 9975, 9976 & 9977
26PAGLIGHT L OPTIONS / MOUNTING ADAPTORSwww.paguk.com
Specifications.
PAG L95e BatteryModel No. 9310PAGlok professional battery connector.
Model No. 9310VSony V-Mount compatible battery connector.
Construction:The casing for these models consists of high-impact polycarbonateinjection mouldings, featuring an internal cradle designed to protectthe cells from impact damage. The cells have welded interconnectionsof low-resistance nickel strap. The batteries are sealed and non user-serviceable.
Cells:Premium grade Lithium-Ion sealed rechargeable cylindrical cells.
Voltage:14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.
Capacity:Nominal 6.5 ampere-hours, with a charge voltage of 4.2V per cell.
Output Current:Rated maximum continuous output current is 7.0 amperes.
Protection:The battery incorporates the following safety shutdown systems:> 3 over-current shutdown systems.> 2 over-voltage shutdown systems.> 2 under-voltage shutdown systems.> 2 thermal shutdown systems (including a non-resetting thermal fuse).All protection circuits within the battery are designed to withstand theleakage of electrolyte.
Operating Temperature Range:Optimum discharge efficiency is achieved within the temperaturerange +10°C to +40°C.
PAG Power & Time Circle Display:A single button-press displays charge status in terms of percentage.The LEDs light clockwise, from the top right round to top left.
5 LEDs = > 90% remaining4 LEDs = 70 - 90% remaining3 LEDs = 50 - 70% remaining2 LEDs = 30 - 50% remaining1 LED = 10 - 30% remaining1 LED flashing = 0 - 10% remaining
The display is also capable of indicating an estimate of remaining run-time, on-load:> The second button-press activates the time display.> The ‘HRS’ LED will flash twice.> The number of remaining hours will be indicated by the number of
lit LEDs: each LED represents 1 hour.> The ‘MINS’ LED will then flash twice.> The number of additional remaining minutes will be indicated by the
number of lit LEDs: each LED represents approximately 10 minutes.
NOTE: This product provides an estimate of remaining run-time.A more accurate and sophisticated run-time display is provided by thePAG Power & Time Display, incorporated in the L95 Time Battery.
Overall Dimensions:Height Width Depth
PAGlok 130mm (5.1") 86mm (3.4") 42mm (1.65")*V-Mount 130mm (5.1") 86mm (3.4") 47mm (1.85")*excluding PAGlok claws
Weight:PAGlok 731g (1.61lb)V-Mount 749g (1.65lb)
PAG L95 Time BatteryModel No. 9382PAGlok professional battery connector.
Model No. 9360Sony V-Mount compatible battery connector.
Model No. 9383PAG Snap-on compatible battery connector.
Construction:The casing for these models consists of high-impact polycarbonateinjection mouldings, featuring an internal cradle designed to protectthe cells from impact damage. The cells have welded interconnec-tions of low-resistance nickel strap. The batteries are sealed and nonuser-serviceable.
Cells:Premium grade Lithium-Ion sealed rechargeable cylindrical cells.
Voltage:14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.
Capacity:Nominal 6.5 ampere-hours.
Output Current:Rated maximum continuous output current is 7.0 amperes.
Protection:The battery incorporates the following safety shutdown systems:> 3 over-current shutdown systems.> 2 over-voltage shutdown systems.> 2 under-voltage shutdown systems.> 2 thermal shutdown systems (including a non-resetting thermal fuse).All electronic protection circuits within the battery are designed towithstand the leakage of electrolyte.
Variable Charge Voltage:The battery can be manually set to control the charge voltage toeither 4.1V or 4.2V per cell. This allows the user to make a choicebetween extended battery cycle life or high capacity. (NOTE: Thisfeature is not available with V-Mount compatible Model 9360).
Operating Temperature Range:Optimum discharge efficiency is achieved within the temperaturerange +10°C to +40°C.
Power & Time Display:The PAG L95 Time Battery incorporates state-of-the-art low-powermicroelectronic circuits, giving the user access to the battery state ofcharge and run-time information. The battery is able to display anaccurate run-time prediction, against any given load, expressed inhours and minutes on the built-in Power & Time Display. It can alsodisplay capacity in ampere-hours in 0.1Ah increments, and percent-age of remaining available capacity in 1% increments.
Overall Dimensions:Height Width Depth
PAGlok 130mm (5.1") 86mm (3.4") 42mm (1.65")*V-Mount 130mm (5.1") 86mm (3.4") 47mm (1.85")Snap-on 130mm (5.1") 86mm (3.4") 52mm (2.00")*excluding PAGlok claws
Weight:PAGlok 745g (1.64lb)V-Mount 745g (1.64lb)Snap-on 760g (1.67lb)
SPECIFICATIONSwww.paguk.com
27
Specifications.
PAG ZL-Series BatteriesModel Battery Connector9316 PAG ZL-150 PAGlok9316V PAG ZL-150 V-Mount compatible9317 PAG ZL-125 PAGlok9317V PAG ZL-125 V-Mount compatible9315 PAG ZL-50 PAGlok9315V PAG ZL-50 V-Mount compatible9314 PAG ZL-NP NP1 format
Construction:These batteries have welded cell interconnections of low-resistancenickel strap. The cases for these models consists of high-impactinjection mouldings with an internal cradle feature designed to protectthe cells from impact damage. The batteries are sealed and non user-serviceable.
Cells:Premium grade Nickel-Metal Hydride sealed rechargeable cylindricalcells.
Voltage:ZL-150, & ZL-50: 14.4V nominal (12 cells connected in series, nominalvoltage 1.2V per cell).ZL-125: 13.2V nominal (11 cells connected in series, nominal voltage1.2V per cell ).ZL-NP: 13.2V nominal (11 cells connected in series, nominal voltage1.2V per cell ).
Capacity:ZL-150 10 Ampere-hours nominal.ZL-125 125 Watt-hours nominal.ZL-50 3.2 Ampere-hours nominal.ZL-NP 3.0 Ampere-hours nominal.
Output Protection:ZL-Series batteries are protected against short circuit and excessivecurrents by means of a self-resetting protection device.
Rated Maximum Continuous Output Current:ZL-150, ZL-125 & ZL-NP: 8 AmperesZL-50: 7 Amperes
Over-Temperature Protection:ZL-150 and ZL-125 batteries are protected by means of a self-resettingthermal trip rated 71°C.ZL-50 and ZL-NP batteries are protected by means of a non-resettingthermal fuse rated 98°C.
Operating Temperature Range:Optimum discharge efficiency is achieved within the temperature range10°C to +40°C.
Power & Time Display:The ZL-125 battery incorporates state-of-the-art low-power micro-electronic circuits, giving the user access to the battery state of chargeand run-time information. The battery is able to display an accuraterun-time prediction, against any given load, expressed in hours andminutes on the built-in Power & Time Display. It can also displaycapacity in ampere-hours in 0.1Ah increments, and percentage ofremaining available capacity in 1% increments.
State of Charge Indication:ZL-50 and ZL-NP batteries incorporate an LED-array charge indicator.
Overall Dimensions and Weights:
Model Battery Dimensions (H x W x D) Weight9316 ZL-150 208 x 125 x 44mm* 2.35kg9316V ZL-150 208 x 125 x 52mm 2.35kg9317 ZL-125 208 x 125 x 44mm* 2.20kg9317V ZL-125 208 x 125 x 52mm 2.20kg9315 ZL-50 130 x 86 x 42mm* 0.88kg9315V ZL-50 130 x 86 x 47mm 0.88kg9314 ZL-NP 182 x 71 x 25mm 0.73kg* excluding PAGlok claws
PAG L110 Time BatteryModel No. 9302PAGlok professional battery connector.
Model No. 9302VSony V-Mount compatible battery connector.
Model No. 9302APAG Snap-on compatible battery connector.
Construction:The casing for these models consists of high-impact poly-carbonateinjection mouldings, featuring an internal cradle designed to protect thecells from impact damage. The cells have welded interconnections oflow-resistance nickel strap. The batteries are sealed and non user-serviceable.
Cells:Premium grade Lithium-Ion sealed rechargeable cylindrical cells.
Voltage:14.8V nominal. The battery contains 12 cells connected in series/parallel. Each cell has a nominal voltage of 3.7V.
Capacity:Nominal 7.5 ampere-hours.
Output Current:Rated maximum continuous output current is 7.0 amperes.
Operating Temperature Range:Optimum discharge efficiency is achieved within the temperature range+10°C to +40°C.
Battery Protection:The battery incorporates the following safety shutdown systems:> 3 over-current shutdown systems.> 2 over-voltage shutdown systems.> 2 under-voltage shutdown systems.> 2 thermal shutdown systems (including non-resetting thermal fuse).All electronic protection circuits within the battery are designed towithstand the leakage of electrolyte.
Power & Time Display:PAG L110 Time Batteries incorporate state-of-the-art low-power micro-electronic circuits, giving the user access to the battery state of chargeand run-time information. The battery is able to display an accurate run-time prediction, against any given load, expressed in hours andminutes on the built-in Power & Time Display. It can also displaycapacity in ampere-hours in 0.1Ah increments, and percentage ofremaining available capacity in 1% increments.
Overall Dimensions:Height Width Depth
PAGlok 130mm (5.1") 86mm (3.4") 42mm (1.65")*V-Mount 130mm (5.1") 86mm (3.4") 47mm (1.85")Snap-on 130mm (5.1") 86mm (3.4") 52mm (2.00")*excluding PAGlok claws
Weight:PAGlok 745g (1.64lbs)V-Mount 745g (1.64lbs)Snap-on 760g (1.67lbs)
NOTE: PAG L110 batteries are currently only available to UKcustomers.
28SPECIFICATIONSwww.paguk.com
Specifications.
PAG Cube ChargerModel 9702V
Battery Connections:4 x V-Mount compatible connectors.
Range of Batteries Charged:> PAG V-Mount Li-Ion: L95e (9310V), L95 (9360, 9335V) L110 (9302V).> PAG V-Mount ZL-Series: ZL-150 (9316V) and ZL-50 (9315V).> Sony V-Mount Li-Ion and Ni-MH.> IDX V-Mount Li-Ion.
Main Charge Programs:> Li-Ion Intelligent Parallel Charging program: maximum output 6A at16.8V (100W approx.).> PAG ACS Ni-MH sequential charge program: output 3A.
Recovery Feature:Automatically recovers a Li-Ion battery where the output has been shutdown. Additionally, the program detects batteries having a very lowvoltage, and initiates a special low charge current. The program willoperate until the voltage has risen sufficiently for batteries to safelyaccept the normal charge current.
Self Test Program:The internal microcomputer constantly monitors the battery undercharge, as well as the operation of the charger’s own functions, whichwill be shut down to a safe condition should any of the tests fail.
Mains Input:90V to 265VAC. Frequency 50-60 Hz. EN6100-3-2 Power factorcorrected. Maximum consumption 140W.
Output Protection:Charger protected against short circuit and excess battery voltage.
AC Mains Failure Protection:Should mains failure occur during a charging program, or whilst thecharger is connected, it will shut down to a safe condition.
User Interface:Comprehensive LCD indication of charging process. The charger is fullyautomatic in operation and no user controls are provided.
Safety:Designed to comply with electrical safety standard BS EN 60065 andUL6500. NOTE: U.K. mains leads are fitted with a 1" fuse to BS1362rated 5A as standard.
European Union Directives:Complies with the following:> EMC Directive 89/336/EU.> Low Voltage Directive 73/23/EU.
Operating Temperature Range:0°C to +40°C (+32°F to +104°F).
Overall Dimensions (H x W x D):157 x 157 x 157mm (6.2 x 6.2 x 6.2")
Weight:1.19kg
Typical Charging Times:1 PAG L95 3hrs 15mins2 PAG L95s 4hrs -3 PAG L95s 5hrs -4 PAG L95s 6hrs 30mins
These times are approximate only, and assume batteries are fullydischarged. Charging times will be less if batteries are already partiallycharged.
PAG AR124PLD ChargerModel 9792
Battery Connections:> Four PAGlok professional battery connectors.> Four PP90 (2.1mm) connectors.
Range of Batteries Charged:> PAGlok Lithium-Ion batteries.> PAG V-Mount Lithium-Ion batteries (via Charge Adaptor Model 9617).> Nickel-Metal Hydride batteries: 4.8V to 14.4V, 1Ah to 10Ah.> Nickel-Cadmium batteries: 4.8V to14.4V, 1Ah to 10Ah.
Main Charge Program:> Auto Mode: automatically selects the correct charge current.> Manual selection: 2A, 3A or 4A charge current.> Li-Ion voltage-charge program: only available with PAG intelligentLi-Ion batteries, which control the charge regime.
Discharge-then-Charge Program:Discharges the battery, automatically determining the fully-dischargedcondition, and then fully charges it. The discharge capacity and thesubsequent charge loaded can be displayed on the screen.
Recovery Charge:Conditions the battery for one hour, then automatically enters the MainCharge program, which runs until the battery is fully charged. Thisprogram also recovers PAG Li-Ion batteries where the internal safetyprotection circuit has tripped.
Ancillary Charging Programs:The following programs may be automatically entered after charging:> Balancing Charge.> Self-adjusting Maintenance Charge (not applied to Li-Ion batteries).
Self Test Program:The internal microcomputer constantly monitors the battery undercharge or process as well as the operation of the charger’s ownfunctions which will be shut down to a safe condition should any of thetests fail.
Mains Input:90-139V or 140-270V ~ autoselected. Frequency 47-63 Hz. Maximumpower consumption 120W.
Output Protection:Charger protected against short circuit, open circuit, excess batteryvoltage and reverse battery voltage.
AC Mains Failure Protection:Should mains failure occur during a charging program, or whilst thecharger is connected, it will shut down to a safe condition.
Safety:Designed to comply with electrical safety standard BS EN 60065.NOTE: UK plugs are fitted with a 1" fuse to BS1362 rated 5A as standard.
European Union Directives:Complies with the following EU Directives:> EMC Directive 89/336/EU.> Low Voltage Directive 73/23/EU.
Operating Temperature Range:0ºC to +40ºC (+32ºF to +104ºF).
Overall Dimensions (W x H x D):168 x 82 x 240mm (6.6" x 3.2" x 9.5" approx.).
Weight:1.23kg (2.70lbs approx.).
For other product specifications visit the PAG website atwww.paguk.com
SPECIFICATIONSwww.paguk.com
29
WARRANTYwww.paguk.com
PAG products have earned a reputation throughout the world for excellence in quality, reliability andperformance. The PAG Warranty reinforces this reputation by guaranteeing each product for a periodof 18 months, unless otherwise stated.
PAG L95 and L110 Batteries (but not L95e), PAG Chargers and 12V Paglights carry a 2 year warranty.
Refer to the product Instruction Manual for full warranty terms and conditions.
A full after-sales support service is provided by PAG throughout a product’s lifetime, which includesservicing, repairs and technical advice.
PAG maintains a worldwide network of Authorised Service Centres. These facilities have a wealth ofspecialist knowledge, which is the result of PAG’s 40 years of experience. Using PAG’s AuthorisedService Centres is the only way to ensure the continuation of the quality standard for which you firstchose PAG products.
For servicing outside of the UK contact your nearest PAG Agent via the PAG website atwww.paguk.com
For servicing in the UK contact the PAG Service Department:Email: [email protected] Mail: PAG Ltd. 565 Kingston Road, Raynes Park,Telephone: +44 (0) 20 8543 3131 London SW20 8SA, UK.
PAG Ltd. hereby declares that PAG L95 and L95e Lithium-Ion batteries contain concentrated lithiumequivalence in a quantity not exceeding 8 grams. This quantity is in compliance with Section A45-2* ofthe Hazardous Substances Standards of the International Civil Aviation Organisation (ICAO).
PAG L95 Lithium-Ion batteries have been independently tested by ETL SEMKO UK and are certified tocomply with UN specification ST/SG/AC.10/11/Rev 4 (Test Report Number 05018716).
PAG L95 and L95e Lithium-Ion batteries are therefore not subject to the IATA Dangerous GoodsRegulations and are suitable for air transport as non-hazardous articles.
The following are trademarks of PAG Ltd:‘PAG Professional Broadcast Equipment’, ‘Time Battery’ ‘Power & Time Display’ ‘SuperPack’ ‘Pagbelt’‘PAG ACS’ ‘AR Series 2’ ‘PAG Pulsar’ ‘PAG Quasar’ ‘PAG Cube’ ‘PAG iPC’ ‘PAG Freelancer’ ‘PAGPower Plate’ ‘PAGlok Connector’ ‘Paglight’ ‘Softstart’ ‘PowerArc’ ‘PowerMax’
All third party trademarks are acknowledged as such.
PAG Ltd. retains the right to change the specificationscontained herein without notice
PAG. Warranty.
30
> PAG has been manufacturing professional productsdesigned specifically for the hand-held camcordermarket for more than seven years.
> To see the full range of products and buy on-line visitwww.paguk.com/C6_Orbitor
> The Paglight C6 lighting kit is incredible value for money.It includes a professional 6V camera light, a 6V 8Ah Ni-MHbattery and a charger. The light posesses many of thefeatures of the 12V Paglight.
> PAG has also designed shoulder mounted camcordersupports, the Orbitor and the X1A, to provide stablility andreduce fatigue when shooting with hand-held camcorders.
>PAG DV Solutions
Your Partner in Power
Professional Broadcast Equipment
PAG Ltd.565 Kingston RoadRaynes ParkLondon SW20 8SAUnited Kingdom
E [email protected] +44 (0)20 8543 3131F +44 (0)20 8540 4116www.paguk.comwww.pagstore.com
PAG is a UK distributor for Angenieux,Cartoni, Chrosziel, Tiffen and Transvideo.
© 2009 PAG Ltd.