RTJ GASKETS
The RTJ gaskets are designed to work with a high temperature and pressure values. For this reason, if
the sealing has to be maximum is essential that the flange surface be as maximum smooth as
possible, without roughness and tools marks neither.
The RTJ is plastically deformed and seals the surface irregularities that contact, for this reason the
gasket material has to be always softer than flange material. This difference has to be, at least 30 HB.
In the case where the gasket materials of RTJ type and the flange had a similar hardness, will be
necessary do a thermal treatment to the RTJ gasket to reduce the hardness.
The RTJ gaskets have a low recuperation. The sealing is produced for the charge action over the
gasket.
Our RTJ gaskets production is based on the regulation ASME B16.20, generally in octagonal profile or
oval, and with a different kind of materials as AISI 304, 316L, 321, 347, INCOLOY 800, INCONEL 600,
MONEL400,etc.
RTJ GASKETS
RTJ GASKETS
RTJ GASKETS
RTJ GASKETS