White

USG ENSEMBLE™ ACOUSTICAL DRYWALL CEILING SEAMLESS DRYWALL LOOK WITH TRUE ACOUSTICAL PERFORMANCE

FEATURES

• Nondirectional, monolithic appearance• Special perforated USG Sheetrock® Brand panels to optimize sound

performance• Installs and fi nishes similar to traditional wallboard• NRC 0.80 and CAC 44• High light-refl ective fi nish (LR-0.85) reduces fi xture and energy use• Acoustically transparent spray-applied fi nish

APPLICATIONS

• Reception areas• Lobbies• Conference rooms• Restaurant dining areas• Museums • Galleries• Spaces with multiple hard surfaces

• Courtrooms• O� ces• Classrooms/ higher education • Libraries• Healthcare o� ces and lobbies• Retail

White

USG Ensemble™ Acoustical Drywall Ceiling

with USG Compässo™ Elite for drywall edge trim.

USG Ceiling Solutions

SC2791/rev. 4-18© 2018 USG Corporation and/or its a� liates. All rights reserved.Printed in U.S.A.

Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661

NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.

ORDER SAMPLES/LITERATUREUSG: samplit@usg.com

fax: 888 874-2348 | usg.comCGC: contact Sales Representative

TECHNICAL SERVICES800 USG.4YOU (874-4968)

TECHNICAL INFORMATION usg.com/ensemble

PERFORMANCE DATA Base Panel Backer Panel NRC CAC LR

USG Sheetrock® Brand Ensemble™ Panels 1" USG Ensemble™ High-NRC 0.80 44 0.85

ASTM E84 and CAN/ ULC S102 surface burning characteristics: Class A. Non-fi re-rated applications only.

SYSTEM COMPONENTS Products Item Number Sizes Packaging Quantity Notes

USG Drywall Suspension Main Tees DGLW26 12' 16 pc. carton 192 LF/ctn Main Tees 16" o.c., no cross tees

Indexed Support Bar ISB109 109" 16 pc. carton 145 LF/ctn 48" o.c.

Indexed Support BarAttachment Clip

ISBAC N/A 100 pc. carton25 pc. carton

N/A Attach at main tee/ISB intersection 48" o.c.

5/8" USG Sheetrock® Brand Ensemble™ Panels

ENSPNL112A 5/8" x 9'-4" 26 pc. unit 970.3 sq. ft./ unit Gypsum panel highly engineered to perform likean acoustical ceiling panel

1" USG Ensemble™ High-NRC Backer Panels

ENSHINRC 16" x 48" 4 pc. unit 21.3 sq. ft./carton Acoustical base mat for High NRC, CAC

5/8" USG Fiberock® Brand End-Joint Backer Panel

ENSFIBEJB 5/8"x15.5" x 48" 1 pc. unit 5.2 sq. ft./panel Backer for fl oating end-joints

USG Sheetrock® Brand Paper Joint Tape

— 250' roll 1 pc. unit 20 roll/ ctn5000 LF/ ctn

Specially formulated paper tape

USG Sheetrock® Brand All Purpose Joint Compound

USAPJC 4.5 gal. pails Single pail48 pail pallet

216 gal./pallet Coverage450 sq. ft./4.5 gal. pail

USG Sheetrock® Brand Ensemble™ Ceiling Compound

ENSCJC 4.5 gal. pail Single pail48 pail pallet

216 gal./pallet Coverage 480 sq. ft./4.5 gal. pail

USG Ensemble™ Spray-Applied Finish, White

ENSSPRAF 4.5 gal. pail Single pail 48 pail pallet

216 gal./pallet Coverage 100 sq. ft./4.5 gal. pail

INSTALLATION DETAILS USG Ensemble™ Acoustical Drywall Ceiling Perspective

Indexed Support Bar, ISB109 (48" o.c.)

USG Ensemble™Spray Applied Finish

USG Compässo™ Elite for Drywall

DGLW26, drywall suspension main tee (16" o.c.)

Indexed Support Bar Attachment Clipinstalled at every hanger wire (48" o.c. max.)

USG Ensemble™ High-NRC Backer panels

12 ga. hanger wire

USG Sheetrock® Brand Paper Tape embedded in USG Sheetrock® Brand All Purpose Joint Compound and finished with USG Sheetrock® Brand Ensemble™ Ceiling Compound

USG Sheetrock® Brand Ensemble™ Panels

USG Fiberock®Brand End-joint Backer Panel

LIMITATIONS 1. For interior ceilings only.2. Not for use in areas subject to continuous high heat and/or humid conditions.3. Not for use in plenums with di� erential pressure. Return air ducts shall be installed according to ASHRAE standards and guidelines.. 4. Install according to Section 5 Environmental Conditions listed in ASTM C840.5. In order to ensure installed performance, component substitutions are not permitted.

USG ENSEMBLE™ ACOUSTICAL DRYWALL CEILINGSEAMLESS DRYWALL LOOK WITH TRUE ACOUSTICAL PERFORMANCE

The trademarks USG, CGC, COMPÄSSO, ENSEMBLE, FIBEROCK, SHEETROCK, IT’S YOUR WORLD. BUILD IT., the USG and CGC logos, the design elements and colors, and related marks are trademarks of USG Corporation or its a� liates.

Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specifi cation and installation.