Upload
joe-onn-lim
View
416
Download
3
Embed Size (px)
DESCRIPTION
Citation preview
2. Required Drawings: 1. ONE plan 2. TWO elevations 3. TWO sections 4. ONE detail drawing/sketch (Submission: 11th June 2014) *Title, Subtitle and Annotations/Note-taking Each drawing must be legible and need to be completed with: Title Block with drawing details & information, Subtitle and Annotations/Note-taking. Incomplete work will receive marks of C- or below. Each drawing must have an appropriate SCALE. You are required to take/make notes based on your understanding of architectural drawings convention requirements to visualize the selected objects. The notes/annotations must be included as part of the drawings requirement and written clearly and neatly in the drawings. At all-time proper architectural lettering is mandatory. Materials/Equipment It is your responsibility to bring all necessary tools to facilitate your measurement, drawing and note-taking. Suggested drawing tools: A3 Paper (120 gm drawing paper or better); Butter paper; Art line pens (0.1, 0.3 & 0.5); Pencils (2B); Soft Eraser; Flexible Eraser; Erasing Shield; Architectural Scale Ruler; Set-square, T- Square or Parallel Ruler. Plagiarism will be taken as a serious case and will result in failure of the subject Submissn Requirement Individual student required to submit the progress sheets that would consist a minimum of 5 pages consisting: 1. Sketches of the chosen 2 objects (at least 3 pages exploration sketches) 2. Measurements of the chosen 2 objects (1 page) These progress sheets must be stapled and signed by your respective tutors (Submission date- 28th May 2014) Then by using book references/ classroom tutorial, independently you are to explore the applications of Drawing Conventions and using the measurement from the observation you are to generate architectural drawings that clearly expressing the 3 dimensional objects in sets of A3 drawings. (Submission date- 11th June 2014) Require Drawings: 1. ONE plan 2. TWO elevations 3. TWO sections 4. ONE detail drawing/sketch Refer to * for mandatory requirements 3. Recommended references It is recommended for everyone to bring to the class at least one reference book of basic architectural drafting and drawing from any of the author listed here: D.K. Ching, Rendow Yee, Thomas C. Wang, Tom Porter etc during tutorials to further enhance your learning outcome for project 2. (drawing conventions references)