Default IP Address

USB

Login to MINI-LINK TN

control_user /

view_user

Password: Ericsson

Configure Basic NERight click>configure>Basic NE As per TND NE Name, Location, Contact,

IP address, Subnet Mask and Default GW

Current date and Time

Configure OSPF Areas

Right Click>Configure>DCN>OSPF Areas

To View the Static Routing

Right Click>Configure>DCN> Static Routing

Right click MMU2 D>configure>Configure Radio Link

Fill all the parameter as per TND

Configure Radio Link (MMU)

Upgrade the Baseline

Right click>Tools>Software Upgrade

Select PC>Browse>chose the baseline from list

Apply>Next

Once 100% done upgrade status the activate

Configure Traffic Routing

Right Click>Configure>Traffic Routing

Select Interface 1 and Interface 2 as per design slot

and send

To Save the TN report

Right click>Tools>Report>Save Report

To Save the Load Configuration

Note: FTP server must be ON/Running

Right click>Configure>Load Configuration

Select Upload to FTP Server and Local server

View The Inventory and Release

Right click>Tools>Inventory

Ethernet Switch Configuration

Right Click Ethernet Switch>Configure>General

Select Aging time and Switch mode

Configure RL-IME

Select RL-IME>Right click>Configure>select the packet link>send

Configure WAN

Select WAN Interface>Right click>Configure>General

Connect to Switch Port

Configure LAN

Right Click on LAN>Configure>General

Assign the switch port

Admin Status Up

Configure VLAN

Right Click on Ethernet Switch>Configure>VLAN

Enter the VLAN ID as per Design and Name

Add the port member

To View The RSL

Right Click on MMU>Radio link alarm and status

To Perform the Loops

Go to Radio Links>Slot>Radio Link Loops