Upload
magnum-wear-parts-gp
View
272
Download
2
Tags:
Embed Size (px)
Citation preview
GROUND ENGAGING CATALOGUE 2015/2016
Magnum Product List
MAGNUM WEAR PARTS | P: 780-978-2895
Essential information for ordering...
At Magnum Wear Parts it is our goal to provide you with the correct product for your machine the first time you order. If you do not have part numbers for the ground engaging tools you
require, it is essential that you identify a few key pieces of information about the machine and the parts in demand:
What type of machine is the part for? Eg: Excavator, Loader, Dozer
What is the make and model number of the machine?Eg. (make): Caterpillar, Hyundai, Volvo, etc.
Model numbers are generally found on either side of the machine in large font.
Who manufactured the bucket? What size is it?Bucket information is printed on a ID tag, often found on the top,
backside of the bucket.
Essential information for ordering...
GROUND ENGAGING TOOLSGROUND ENGAGING TOOLS
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET TEETH & ADAPTERSHow does the tooth pin onto the adapter?
Eg: Side Pin, Top Pin, Bolt-On, Crimp-On.
What style of pin is used?Eg: 1 piece rubber Flex Pin, 2 piece Pin & Lock,
Snap Ring Pin
What are the dimensions of the tooth pocket?
The tooth pocket is the hollow space of the tooth where the adapter is inserted then
pinned. Much like a puzzle, the two must fit together to work properly. Important mea-surements of the pocket are as such: Inside
Horizontal Width, Inside Vertical Height, and Inside Depth.
Other factors to consider include: Level of penetration required for the job. (ie: type of earth that is being worked on - extremely hard or frozen as opposed to loose, easily penetrable soil.
How many pieces do you require?Eg: 2 corners, 2 centers.
What size (diameter) are the holes?How many holes are there?
What is the hole pattern (spacing)?Please see an example of our
Cutting Edge Worksheet. It will help you identify & accurately relay the afformentioned specifications
to our sales & production team.
Other factors to consider include: Ground condition (frozen? loose soil?) abrasiveness,
wearability & job factors.
Essential information for ordering...
CUTTING EDGES
MAGNUM WEAR PARTS | P: 780-978-2895
REPLACEMENT BUCKET TEETH Identifiable characteristics of the replacement bucket teeth we carry and the corresponding locking mechanism.
TOOTH STYLE PIN HOLE LOCATION
PIN HOLE SHAPE
IDENTIFICATION PICTURE
CATERPILLAR SIDE ROUND2 pc STEEL PIN &
STEEL OR SLEEVED RETAINER
RETAINER IS A LOCK WASHER RECESSED DEEP
INTO ADAPTER
ESCO CONICAL TOP RECTANGLE 2 pc STEEL PIN & RUBBER LOCK
LOCK IS INSIDE NOSE OF ADAPTER; TOOTH IS PUT ON
& PIN IS DRIVEN INTO TOP OF TOOTH
ESCO HELILOK / VERTALOK
NO PIN HOLES N/A
HELILOK: 1 pc HORE-SHOE SHAPED PIN
VERTALOK: 2 pc PIN & PLUG
“EARS” ON OUTSIDE OF PICKET INSTEAD OF PIN
HOLES
ESCO SUPER-V NO PIN HOLES N/A 1 pc PIN (TWO PIN
STYLES - PICTURED)
SQUARED “EARS” AT END OF POCKET; PIN IS INSERTED
BETWEEN THE EARS & THE NOSE OF THE ADAPTER
KOMATSU SIDE ROUND1 pc STEEL PIN WITH STEEL SNAP RING AT
CENTER OF PINLARGE ROUND HOLE
HENSLEY PARABOLIC TOP RECTANGLE
or ROUND
1 pc STEEL+RUBBER FLEX PIN or ALL
STEEL PIN
SMALLER TEETH USE A ROUND STEEL ROLL PIN (RARE HENSLEY’S USE A
SIDE PIN)
H&L SIDE OBLONG 1 pc STEEL+RUBBER FLEX PIN
SOME RARE H&L TEETH USE A TOP PIN
HYUNDAI SIDE ROUND2 pc STEEL PIN &
SLEEVED or STEEL RETAINER
RETAINER IS A LOCK WASHER RECESSED DEEP
INTO ADAPTER
COMBI SIDE OBLONG 1 pc STEEL & RUBBER FLEX PIN
POCKET IS NOTCHED. PIN LOCATED ON SIDE OF
TOOTH AT UPPER END OF POCKET
LOCKING SYSTEM
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET TOOTH PROFILES EXCAVATORS
MOST Penetrative
LEASTPenetrative
PROFILE TYPE PICTURE FEATURES & BENEFITS
TIGER
-Unmatched penetration in frost, rock or hard-pan conditions.-Stays sharp.-Little wear material = shorter lifespan.
TWIN TIGER-More penetration longer life than Tiger.-Less leverage than Tiger requiring more breakout force from the Excavator.
PENETRATION
-Good penetrating tooth.-Stays sharp throughout life.-Average wear material.-Good for lightly packed rock shale & clay.
EXTRA
-Premium design for max penetration and lifespan.-Tip has self sharpening rib.-Reinforced box for rock and abrasive terrain.
FLAT PENETRATOR(SYL)
-Good penetration & digging action in most medium to hard pack conditions.-Vertical rib on both sides maintains sharp point w/ average amount of wear material.
ROCK CHISEL-Best for use on rock or hard ground.-Remains sharp throughout life.-Good leverage takes pressure off machine. & bucket improving performance & lifespan.
ROCK ABRASION
-Similar to Rock Chisel but much more wear material on underside of tooth.-Best for use on any high abrasion application.
STANDARD LONG
-Multi-purpose general duty tooth.-Good choice for most basic applications. -Available in most styles of teeth.-Available for most sizes of equipment.
FLARE-Desinged for mud or soft ground.-Works as a paddle to lift earth. -Best for clean-out/utility work.
HEAVY DUTY LONG-Very similar to Standard Long but with much more wear material throughout.-Longest wear life of all the tooth profiles.
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET TOOTH PROFILES LOADERS
MOST Penetrative
PROFILE TYPE PICTURE FEATURES & BENEFITS
ROCK ABRASION
- Good Penetration, Wear material on underside of tooth- Best for use on any high abrasion application
HEAVY DUTY ROCK ABRASION
- Better Penetration than rock abrasion, Lots of wear material on bottom of tooth- Stays sharp- Works well in compacted & high abrasion material
STANDARD LONG
- Multi-purpose, general duty tooth- Good choice for most basic applications- Available in all styles of teeth- Available for all sizes of equipment
HEAVY DUTY LONG- Very similar to Standard Long but with much more wear material throughout- Longest wear life of all the tooth profiles
ABRASION
-Offers similar applications as the Standard Long, but with a wider tip-Extra wear panel on the bottom of the tooth-May also be found on log grapples
HEAVY DUTY
ABRASION
-Similar to Abrasion with a lot more wear material-Heavy Duty wear panels on the bottom & sides of the tooth
LEASTPenetrative
MAGNUM WEAR PARTS | P: 780-978-2895
RIPPER TOOTH PROFILES BULLDOZERS
MOST Penetrative
LEASTPenetrative
PROFILE TYPE PICTURE FEATURES & BENEFITS
HD RIPPER-Premium wear steel and ribbed faces. Allow for better material flow, tooth strength and wear material in harsh conditions.
RIPPER PENETRATION
-Designed for better ripping in hard pack. -Large rib in center allows material to flow better and gives the tooth more stability.
NON-CENTERLINE-Similar to centerline, but with more of the steel put back to allow for more stability and wear steel in usable areas.
ABRASION-Non-centerline design that has more material put into the profile.-Allows for extra wear in standard ripping conditions.
CENTERLINE-Designed for general purpose ripping conditions.-Tooth is reversible as both front and back are the same profile and have equal material on each side.
CENTERLINE SHORT
-Same as a regular centerline, but shorter to give more strength in the wear material.-Tooth is less likely to have breakages in tougher condtions.
The Profile of a tooth indicates the level of penetration it’s capapble of & therefore determines the applications that the tooth is best suited for. The following numbers will indicate the Profile of the tooth (Profile Number Cross Reference):
HOW TO IDENTIFY MOST CATERPILLAR STYLE TEETH:
The 4th & 5th digits are most important and indicate the Family that the tooth belongs to. The 6th digit may indicate the Profile of the tooth. The 7th & 8th digits may, in some cases, describe the Manufacturer or the Profile.
A Caterpillar style tooth can often be identified by its part number. Certain digits of the part number have specific meanings:
1 - Short 8 - Sharp2 - Long, HD Long, Standard 9 - Penetration3 - Abrasion, HD Abrasion 0 - Flare / Wide
Eg: Part number 1U3352RC = J350 Family, Standard Long tooth with a Rock Chisel profile
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET ADAPTER PROFILESLoaders & ExcavatorsAvailable for Caterpillar, Esco, Komatsu, Hensley, H&L, Combi, MTG, and more!
PROFILE TYPE PICTURE FEATURES & BENEFITS
FLUSHMOUNT -Used exclusively on Loaders.-Sits on top of bucket lip to allow for loader to scrape clean.
1-1/2 LONG LEG TOP
-Generally meant for Loaders (used on some Excavators).-The Loader application is good for buckets using a wear edge or lip protector between adapters.-An angled left & right hand adapter is available in some Cat Loader sizes only.-Not to be used on Cat or Komatsu Excavators
1-1/2 LONG LEG BOTTOM
-Used exclusively on Excavators -Wraps around the bucket lip with the longest leg on the bottom to provide support.-Notched left & right hand adapter is available in some Cat sizes only.
1-1/4 LONG LEG BOTTOM
-Used exclusively on Excavators & Backhoes.-Wraps around the bucket lip with the longest leg on bottom to provide support.-Available for small Caterpillar, H&L, & most Esco styles.
WELD-ON NOSE
-Cost effective option for replacing worn out noses or for use on log grapples.-Available in all Caterpillar styles, most Esco styles & select Hensley sizes.
2 LEG BOLT-ON
-Generally used only on Loaders.-Double leg, bolt on adapter is ideal for changing to clean up bucket easily & quickly.-May have 2 or 3 bolt holes.-Available in select Caterpillar & Hensley style sizes only.-Right & Left hand adapters are available for Caterpillar only.
FLUSHMOUNT BOLT-ON
-Exclusively for small Loaders.-Allows for easy change to clean up bucket by removing the adapters.-Available in select Hensley style sizes only.
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET ADAPTER PROFILES BULLDOZER
PROFILE TYPE PICTURE FEATURES & BENEFITS
WELD ON NOSE - Replaceable nose for ripper shanks.- Tooth pins directly onto nose that is welded to existing shanks.
NOSE SEGMENT- Quarter shank that is welded into the full shank- This is the primary wear section of a shank assembly that replaces worn out or broken shanks.
SHANK ASSEMBLY- Full Shank assembly that bolts onto dozers and graders.- Can be designed to fit almost any tooth system and shank guards.
SHANK GUARD HD SHARP
- Similar to a regular shank guard that has more material built up to provide extra protection and wear material. - Sharp design allows the material to flow better across the face of the shank.
OEM
SERIES
CAT ESCO H&L KOMATSU COMBI HENSLEY MTG
J SERIES
K SERIES
CON
ICAL
SUPER V
HELILO
K VERTA
LOK
ULTRA
LOK
FLEX PIN
SIDE PIN
K-MA
X
C-LOCK
PARA
BOLIC
XS
KING
MET
V13 2AF MINI 04 MG5
J200 18 V17- 17 U20 230 W8 C0 X156 05 MG8
J220 25 V19 19 240 C0 X160 10 MG10
J250 30 V23 21 U25 250 15 C1 X220 15 MG15
J300 K80 35 V29 27 U30 270 200 20 C2 X310 20 MG20
J350 K90 40 V33 U35 31 25 C3 X330 25 MG30
J400 K100 45 V39 37 U40 300 30 C3.5 X370 30 MG40
J460 K110 50 V43 47 U45 32 400 40 C4 X410 40 MG55
J550 K130 55 V51 57 U55 33 50 X450 50 MG65
J660 K150 65 V59 U60 650 70 C5 X500 50 MG80
J700 K170 70 V61 67 U70 85 X600 85 MG125
J800 V69 U80 1000 C6 115 MG200
OEM BUCKET TOOTH SERIESWe carry a complete aftermarket inventory of all the most common OEM bucket tooth series listed below:
CO
MPA
RA
TIVE O
EM TO
OTH
PRO
FILES
CATERPILLAR STYLE BUCKET TEETHPopular CAT Series. All series available.
J250 SeriesTooth PocketW: 2-1/4’’H: 2-3/4’’D: 3-1/8’’
PINS
Standard9J2258W: 9/16’’L: 3-1/8’’
8e6259OD: 1-3/16’’ID: 17/32’’
J350 SeriesTooth PocketW: 3-1/8’’H: 3-1/4’’D: 4-1/16’’
PINS LOCKS
Standard9J2358W: 3/4’’L: 4-1/4’’
8e6359OD: 1-3/4’’ID: 23/32’’
J450/460 Series
PINS LOCKS
J460Standard
1U1458W: 3/4’’L: 5-1/4’’
8e6359OD: 1-3/4’’ID: 23/32’’
Tooth PocketW: 3-15/16’’H: 4-1/4’’D: 4-7/8’’
J550 SeriesTooth PocketW: 4-7/8’’H: 4-5/8’’D: 5-3/4’’
PINS LOCKS
Standard1U1558W: 1’’L: 6-3/8’’
8e5559OD: 2’’ID: 31/32’’
MAGNUM WEAR PARTS | P: 780-978-2895
MAGNUM WEAR PARTS | P: 780-978-2895
Tooth PocketW: 2-1/2’’H: 2-1/2’’D: 3’’
STANDARD PIN
V23pN W: 5/8’’ L: 2-1/16’’
V23 Series
ESCO SUPER - V STYLE BUCKET TEETHPopular Esco Super-V Series. All series available, inclusive of Helilock, Conical, and Vertilok.
Tooth PocketW: 2-13/16’’H: 2-13/16’’D: 2-13/16’’
V29 Series
STANDARD PIN V29pN W: 7/8’’ L: 3-1/8’’
Tooth PocketW: 3-1/4’’H: 3-1/4’’D: 3-3/16’’
V33 Series
STANDARD PIN
V33pN W: 7/8’’ L: 3-3/8’’
V43 SeriesTooth PocketW: 4’’H: 4’’D: 4‘’
STANDARD PIN
V43pN W: 1-1/8’’ L: 4-1/8’’
PIN LOCKS (2 required)
390LTp IW: 17/32’’ IH: 4-3/4’’
75KLKSR W: 13/16’’ L: 3-3/16’’
Log Grapple Tooth PocketW: 7-7/8’’H: 3-1/4’’D: 3-1/2’’
ApplicationPart #
Weight / Pc
Weld On Nose 75LLWN
68.00 lbs
V51 SeriesTooth PocketW: 4-1/8’’H: 4-1/8’’D: 4-5/16‘’
STANDARD PIN
V51pN W: 1-1/2’’ L: 4-7/16’’
75LL
MAGNUM WEAR PARTS | P: 780-978-2895
Tooth PocketW: 1-1/8‘’H: 1-1/4’’D: 2-1/2‘’
2A Series
23 SeriesTooth PocketW: 1-9/16‘’H: 1-3/4’’D: 2-7/8‘’
FLEX PIN XL FLEX PIN
23p W: 23/32’’ H: 2-1/8’’
23peX W: 23/32’’ L: 2-1/2’’
4 TAB FLEX PIN
23p4T W: 23/32’’ L: 2-1/8’’
Tooth PocketW: 2-1/16‘’H: 2-3/16’’D: 3-5/8‘’
25 Series
FLEX PIN
25p W: 27/32’’ L: 2-27/32’’
Tooth PocketW: 2-1/2‘’H: 1-3/4’’D: 3-1/4‘’
SPLIT ROLL PIN
p156 W: 3/8’’ H: 2’’
X156 SeriesTooth PocketW: 2-1/2‘’H: 1-3/4’’D: 3-1/4‘’
FLEX PIN
23p W: 23/32’’ H: 2-1/8’’
X156X Series
H&L STYLE BUCKET TEETHPopular H&L Series. All series available.
HENSLEY STYLE BUCKET TEETHPopular Hensley Series. All series available.
MAGNUM WEAR PARTS | P: 780-978-2895
EDGES IN STOCK FOR ALL MAKES OF:EXCAVATORS / LOADERS/ GRADERS / DOZER / SCRAPER / PLOWS / SKID STEERS / TRACTORS
MAKES INCLUDE:CAT / DEERE / HITACHI / KOMATSU / CASE / BOBCAT / HYUNDAI / DOOSAN / PLUS MANY MORE...
REPLACEMENT CUTTING EDGESRed Tip Edges are fabricated using the Highest Grade 400HB+ Heat Treated Steel
RED - TIP CUTTING EDGESRED - TIP CUTTING EDGES
MAGNUM WEAR PARTS | P: 780-978-2895
EXCAVATOR BULLDOZER LOADER
> OEM fit or custom designed> Weld On or Bolt On Cutting Edges> Standard, Serrated or Half Arrow Cutting Edges> Weld In Base Edges with holes for edges or straight to accept adapters> Heat Treated Edges ffom 1/2’’ - 2’’ thick> Weld On Bucket Wear Bars also available
> OEM fit or custom designed> Cutting Edges made straight or cropped ofr U-Blades> Bolt On Cutting Edges Through- Hardened from 5/8’’ - 2’’ thick> End bits available in Hot Cupped, Level Cut or Flat
> OEM fit or custom designed > Weld On or Botl On Cutting Edges & Segments> Standard, Serrated or Half Arrow Segments & Cutting Edges> Lips available in Straight Spade & Semi-Spade styles> Bolt On or Weld On Wear & Heel Plates for buckets> Fully heat treated Edges from 1/2’’ - 2’’ thick
SCRAPER GRADER PLOW
> OEM fit or custom designed> Straight Level Cut & Drop Center Cutting Edges> Through Hardened Edges from 3/4’’ - 2’’ material
> OEM fit or custom designed > Curved Grader Blades in 6’’, 8’’, & 10’’ wide> Flat Grader Blades in 8’’, 10’’, 13’’, & 16’’ wide> All Grader Edges available in Standard or Serrated> Heat Treated or High Carbon Steel from 1/2’’ - 2’’ thickness> Flat Tungsten Carbide impregnated Cutting Edges now available> Full selection of Flat or Curved Wing Edges.> Moldboard End Bits & Overlays available
> OEM fit or custom designed> Flat or Curved Bolt on Wear Edges> HIgh Carbon or Heat Treated material> Top or Center Drilled> Flat Tungsten Carbide impregnated Edges now available
We design and fabricate cutting edges, wear plates, base edges, shrouds and end bits for virtually any piece of equipment. Our full fabrication team works feverishly to maintain our average build time of only 3 days from order placement.
CUTTING EDGE APPLICATIONS
MAGNUM WEAR PARTS | P: 780-978-2895
SQUARE EDGE FLAT SINGLE BEVEL FLAT DOUBLE BEVEL FLAT HALF ARROW
> Generally used for front mounted snow plow> May also be used for appli- cation specific base edges on excavators & loaders> Usually mae as bolt-on with holes in top or in the center (reversible)> Holes may be countersunk, round or square> Material is often high carbon steel
> Commonly used as a weld on edge (welded to base of bucket)> Can also be used as a base edge (made with or wihout holes to accomodate bolt- on edges, adapters or wear segments) > Can be custom drilled or cut> Can be either heat treated steel for wear or weldable steel for base edges.
> Generally meant as a Bolt- On wear edge for Loaders, Dozers, Graders, Scrapers, Backhoes & Excavators> Commonly supplied with bolt holes center drilled (ex cept for Graders) to allow for the edge to be reversed after lead edge is worn> Available without holes for custom weld-on applications> Supplied in Heat-Treated or Thourgh-Hardened steel
> EIther Bolt-on or Weld-on> Generally designed for Loader bucket applications> Sometimes used as a replacement cutting edge for Excavators> Sold in bulk lengths or cut into segments (custom holes and lengths available)> Heat treated Boron steel
DOUBLE BEVEL CURVED SERRATED ROUTER BIT HOT CUPPED
END BIT
> Primarily used in Grader or Plow applications> Generally supplied with square countersunk holes at the top of the blade> Can be custom ordered with no holes or specialized holes> Standard heat treated diamond steel (some smaller sizes made from high-carbon steel)
> Serrated (Ice Edges) can be made from Singel Bevel or Double Bevel Flat, or, Double Bevel Curved material> Serrations can be cut into either side of the edge or both sides (reversible)> Teeth are made with standard width and gap spacing (which depends on thickness and size of the edge)> Custom serrations can be cut to specification
> Designed to work on Scrapers> They help move material into the center of the bowl and up the elevating conveyor> Available in Standard & Heavy Duty for most major OEM Equipment
> Made exclusively for Bull dozers> Designed in a left & right hand configurations> Dig deep into the surface material and help move it to the center of the blade to ensure even material flow> Available in many different thicknesses to suit your application (and most OEM Bulldozers)
CUTTING EDGE PROFILES
MAGNUM WEAR PARTS | P: 780-978-2895
BUCKET WIDTH /
STyLEBASE EDGE
STANDARD BOLT-ON
EDGE
SERRATED BOLT-ON
EDGE
3PC BOLT-ON EDGE
QTy OF HOLES
SIZE OF HOLE
24" E152X25X610SBF6 E203X19X660DBF6 E203X19X660DBFS6 N/A 4 3/4"
30" E152X25X762SBF6 E203X19X813DBF6 E203X19X813DBFS6 N/A 5 3/4"
32" E152X25X813SBF6 E203X19X864DBF6 E203X19X864DBFS6 N/A 5 3/4"
36" E254X32X914SBF6 E254X25X965DBF6 E254X25X965DBFS6 N/A 6 1"
40" E254X32X1016SBF6 E254X25X1067DBF6 E254X25X1067DBFS6 Please Call Us 7 1"
42" E254X32X1067SBF6 E254X25X1118DBF6 E254X25X1118DBFS6 JD49044C (X1) & 7 1"
48" E254X32X1219SBF6 E254X25X1270DBF6 E254X25X1270DBFS6 JD49050C (X1) & 8 1"
48" XHD E305X38X1219SBF6 E305X251270DBF6 E305X38X1270DBFS6 Please Call Us 8 1"
54" E254X32X1372SBF6 E330X25X1422DBF6 E330X25X1422DBFS6 JD49056C (X1) & 10 1"
54" XHD E305X38X1372SBF6 E406X28X1422DBF6 E406X28X1422DBFS6 JD69056C (X1) & 10 1"
60" E254X32X1524SBF6 E330X25X1574DBF6 E330X25X1574DBFS6 JD59062C (X1) & 11 1"
60" XHD E305X38X1524SBF6 E406X28X1574DBF6 E406X28X1574DBFS6 JD69092C (X1) & 11 1"
62" E254X32X1574SBF6 E330X25X1626DBF6 E330X25X1626DBFS6 JD59062C (X1) & 12 1"
62" XHD E305X38X1574SBF6 E406X28X1626DBF6 E406X28X1626DBFS6 JD69062C (X1) && 12 1"
66" E305X38X1676SBF6 E406X28X1727DBF6 E406X28X1727DBFS6 JD89068C (X1) & 13 1"
66" XHD E305X50X1676SBF6 E406X34X1727DBF6 E406X34X1727DBFS6 Please Call Us 13 1"
72" E305X38X1829SBF6 E406X28X1880DBF6 E406X28X1880DBFS6 JD69074C (X1) & 14 1"
72" HD E305X50X1829SBF8 E406X28X1880DBF8 E406X28X1880DBFS8 JD89074C (X1) & 9 1"
72" XHD E355X50X1829SBF8 E406X34X1880DBF8 E406X34X1880DBFS8 Please Call Us 12 1"
84" E355X50X2134SBF6 E406X28X2185DBF6 E406X28X2185DBFS6 JD89086C (X1) & 14 1"
84" XHD E355X50X2134SBF6 E406X34X2185DBF6 E406X34X2185DBFS6 Please Call Us 14 1"
EXCAVATOR CLEANUP EDGE QUICK GUIDE
PART # WIDTH THICKNESS OF ARROW
THICKNESS OF WELD PLATE
MAX LENGTH
E100X13X21HASW 4’’ 7/8’’ 1/2’’ 228’’E154X19X32HASW 6’’ 1-1/4’’ 3/4’’ 228’’E203X19X32HASW 8’’ 1-1/4’’ 3/4’’ 144’’E254X28X57HASW 10’’ 2-1/4’’ 1-1/8’’ 144’’E254X40X70HASW 10’’ 2-3/4’’ 1-9/16’’ 168’’
MACHINE WEIGHT
BUCKET CAPACITy
WELD-ON HALF ARROW
AVAILABLE LENGTHS
UP 10,000 LBS Up to 2 Cu. Yards HA122404 Up to 10 Feet10,000 - 25,000 LBS 2 - 4 Cu. Yards HA204006 Up to 10 Feet25,000 - 60,000 LBS 3 - 6 Cu. Yards HA244008 Up to 10 Feet
60,000 - 100,000 LBS 5 - 9 Cu. Yards HA367210 Up to 12 Feet100,000 - 200,000 LBS 9 - 20 Cu. Yards HA528810 Up to 14 Feet
HALF ARROW
20
BLUE STEEL SERIESmade in Sweden
MAGNUM WEAR PARTS | P: 780-978-2895
MAGNUM WEAR PARTS | P: 780-978-2895
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Ice Scraper BX500 - Flat
PartNumber
Dimension mmW T L Notes
1257069 180 10 692 Bundles of 10 pcs
1257079 180 10 792 Bundles of 10 pcs
1257091 180 10 915 Bundles of 10 pcs
1257122 180 10 1220 Bundles of 10 pcs
1257152 180 10 1525 Bundles of 10 pcs
1258069 240 10 692 Bundles of 10 pcs
1258079 240 10 792 Bundles of 10 pcs
1258091 240 10 915 Bundles of 10 pcs
1258099 240 10 991 Bundles of 10 pcs
1258122 240 10 1220 Bundles of 10 pcs
1258152 240 10 1525 Bundles of 10 pcs
1259091 300 10 915 Bundles of 10 pcs
1259122 300 10 1220 Bundles of 10 pcs
1259152 300 10 1525 Bundles of 10 pcs
Ice Scraper BX500 90˚- Returned Ends
PartNumber
Dimension mmW T L Notes *)
1157085 180 10 850 (792)
1157098 180 10 980 (915)
1157128 180 10 1280 (1220)
1158085 240 10 850 (792)
1158098 240 10 980 (915)
1158128 240 10 1280 (1220)
The holes are adapted to hole spacing 305 mm.*) Dimension in the bracket shows the length of the flat BX500 that can replace the BX500 90˚.
The holes are adapted to hole spacing 305 mm.A handling charge will be added if the bundle is broken.
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Flat EdgesPartNumber
Dimension mmWT L Number of
holesNotes
1010091 2006 915 3 x 2
Bundles of 10 pcs
1010122 2006 1220 4 x 2
Bundles of 10 pcs
1010152 2006 1525 5 x 2
Bundles of 10 pcs
1012061 20010 610 2 x 2
Bundles of 10 pcs
1012069 20010 692 3 x 2
Bundles of 10 pcs
1012079 20010 792 3 x 2
Bundles of 10 pcs
1025079 20010 792 3 x 2
Bundles of 10 pcs/600 HB
1012091 20010 915 3 x 2
Bundles of 10 pcs
1025091 20010 915 3 x 2
Bundles of 10 pcs/600 HB
1012099 20010 991 4 x 2
Bundles of 10 pcs/600 HB
1025099 20010 991 4 x 2
Bundles of 10 pcs
1012122 20010 1220 4 x 2
Bundles of 10 pcs
1025122 20010 1220 4 x 2
Bundles of 10 pcs/600 HB
1012152 20010 1525 5 x 2
Bundles of 10 pcs
1025152 20010 1525 5 x 2
Bundles of 10 pcs/600 HB
1013061 20012 610 2 x 2
Bundles of 10 pcs
1013069 20012 692 2 x 2
Bundles of 10 pcs
1013079 20012 792 3 x 2
Bundles of 10 pcs
1013091 20012 915 3 x 2
Bundles of 10 pcs
1013099 20012 991 4 x 2
Bundles of 10 pcs
1013122 20012 1220 4 x 2
Bundles of 10 pcs
1013152 20012 1525 5 x 2
Bundles of 10 pcs
1014122 20016 1220 4 x 2
1017122 20016 1220 4 x 2
Counter sunk holes
1014152 20016 1525 5 x 2
1017152 20016 1525 5 x 2
Counter sunk holes
The holes are adapted to hole spacing 305 mm.A handling charge will be added if the bundle is broken.
BX500 Flat EgesAvailable in 1/2" & XHD 5/8"
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
PartNumber
Dimension mm
W
T
L
2658069240
10
692
2658079240
10
792
2658091240
10
915
2658099240
10
991
2658122240
10
1220
2658152240
10
1525
The holes are adapted to hole spacing 305 mm.
Ic
e Scraper BX500, Rubber Coated
Cutting Edges
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
PartNumbers
Dimensions mmW
T
L
5121610
150
16
6100
5122610
150
20
6100
5132610
200
20
6100
5133610
200
25
6100
5143610
250
25
6100
5134610
200
30
6100
5144610
250
30
6100
5154610
270
30
6100
5164610
300
30
6100
5155610
270
35
6100
5165610
300
35
6100
5166610
300
40
6100
7576610
400
40
6100
5568600
300
50
6000
7578600
400
50
6000
BOROX 400
Other dimensions quoted on request.
All mecanical properties according to data sheet for Borox 400.
Bolt-On Edges
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
PartNumbers
Dimensions mmW T L Bolt
DimensionsHoleDistance
8721610 150 16 6100 5/8" 6"8722610 150 20 6100 5/8" 6"8732610 200 20 6100 5/8" 6"4732610 200 20 6100 3/4" 6"8733610 200 25 6100 5,8" 6"4733610 200 25 6100 3/4" 6"8743610 250 25 6100 5/8" 6"4743610 250 25 6100 3/4" 6"8603610 250 25 6100 7/8" 6"4603610 250 25 6100 1" 6"4744610 250 30 6100 3/4" 6"8604610 250 30 6100 7/8" 6"4624610 300 30 6100 1" 6"4634610 330 30 6100 1" 6"4664610 380 30 6100 1" 6"4605610 330 35 6100 1" 6"4606610 330 40 6100 1" 6"8866610 330 40 6100 1 1/4" 6"4616610 400 40 6100 1" 6"8816610 400 40 6100 1 1/4" 6"
BOROX 500
Other dimensions quoted on request.Mecanical properties according to data sheet for Borox 500.
Our Blue Steel edges are through hardened to 500 & 600 Brinell. The Blue Steel blades will do the job better, last longer, and cost you less in fuel and time. We offer a wide variety of cutting edges and plow blades that can be customized as per request.
BLUE STEEL FOR GRADERS AND PLOWS
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Wear StripsPartNumbers Dimensions mmW
T
L
610230080
10
3000
620260080
10
6000
620330080
12
3000
620360080
12
6000
620430080
15
3000
620460080
15
6000
620530080
20
3000
620560080
20
6000
620630080
25
3000
620660080
25
6000
6112300100
10
3000
6212600100
10
6000
6013300100
12
3000
6213600100
12
6000
6114300100
15
3000
6214600100
15
6000
6115300100
20
3000
6215600100
20
6000
6016300100
25
3000
6216600100
25
6000
6217300100
30
3000
6217600100
30
6000
6023300150
12
3000
6223600150
12
6000
6024300150
15
3000
6224600150
15
6000
Other dimensions quoted on request.Available in hardness from 450-500 HB.All mecanical properties according to data sheet for Wear Strips.
• Made from premium Swedish Wear-X Steel.• 500 & 600 Brinell & through hardened.• 8lbs/ft (conventional Grader blade 15lbs/ft).•75% of the blade is useable wear steel (conventional grader blade 45%-55%).• Easily mounted & adjusted with minimal hand tools.• Maximum cutting allows teeth to stay sharp = increased productivity.• Lower downward force required = fuel savings, reduced tire & hydraulic wear.
The Blue Steel BX500 is a cutting edge for Graders & Plows, mainly used for
working in gravel, dirt, & hard packed snow and ice.
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
ProfilArtikelNummer
Dimension mmT W W1 T1 L3005300 11 101 46 21 3000
3005610 11 101 46 21 61003105300 16 151 68 32 30003105610 16 151 68 32 61003305366 19 203 127 32 36603205366 29 254 130 57 36603206366 40 254 130 68 3660
KamprofilArtikelNummer
ProfilNummer
Dimension mmH W W1 W2 L3546300 46 30 16 4 5 3000
3578300 78 40 22 5 7 30003592300 92 50 27 6 10 30003596300 96 65 30 10 10 30003598300 98 68 37 12 14 30003599300 100 75 45 12
30003524300 24T5 24 42 33 2 3000Andra dimensioner offereras på begäran.Mekaniska egenskaper enligt datablad för Borox 500.
BOROX 500
BOROX 500
BX500 Rubber Coated
500 HB Cutting Edges500HB Bolt-On Edges
Half Arrow
BX500 Available in 1/2" & XHD 5/8"
BX500Serrated Edge - Curved
• Blades are reversible increasing the amount of usable wear steel.
MAGNUM WEAR PARTS | P: 780-978-2895
Borox International AB, Oxelösund, Swedenb • Phone: +46(0)155 26 48 80 • www.borox.com
Curved Ice Scraper
Part Number
Dimension mmW T L Hole
spacing Notes
1213091 193 12 915 305 3x2 holes
1213122 193 12 1220 305 4x2 holes, package of 10 pcs
1213152 193 12 1525 305 5x2 holes, package of 10 pcs
Flat Notched Grader
PartNumber
Dimension mmW T L
Hole spacing Notes
1242061 200 10 610 305 2x1 holes
1242091 200 10 915 305 4x1 holes
1242122 200 10 1220 305 4x1 holes
1242152 200 10 1525 305 5x1 holes
Flat Ice Scraper
PartNumber
Dimension mmW T L
Hole spacing Notes
1223079 200 12 792 305 3x2 holes, package of 10 pcs
1223122 200 12 1220 305 4x2 holes, package of 10 pcs
1223152 200 12 1525 305 5x2 holes, package of 10 pcs
1253122 200 12 1220 305 4x2 holes, rolled profile
A handling charge will be added if the package is broken.
Borox International AB, Oxelösund, Swedenb • Phone: +46(0)155 26 48 80 • www.borox.com
Curved Ice Scraper
Part Number
Dimension mmW T L Hole
spacing Notes
1213091 193 12 915 305 3x2 holes
1213122 193 12 1220 305 4x2 holes, package of 10 pcs
1213152 193 12 1525 305 5x2 holes, package of 10 pcs
Flat Notched Grader
PartNumber
Dimension mmW T L
Hole spacing Notes
1242061 200 10 610 305 2x1 holes
1242091 200 10 915 305 4x1 holes
1242122 200 10 1220 305 4x1 holes
1242152 200 10 1525 305 5x1 holes
Flat Ice Scraper
PartNumber
Dimension mmW T L
Hole spacing Notes
1223079 200 12 792 305 3x2 holes, package of 10 pcs
1223122 200 12 1220 305 4x2 holes, package of 10 pcs
1223152 200 12 1525 305 5x2 holes, package of 10 pcs
1253122 200 12 1220 305 4x2 holes, rolled profile
A handling charge will be added if the package is broken.
Serrated Edge - FlatSerrated Edge - Flat Notched Grader
Mounting Plate
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Mounting Plate
PartNumber
Dimension mm W T L
Hole spacing Notes
1402181 130 15 1817 305 Countersunk (wedge bolt 47)
1402212 130 15 2122 305 Countersunk (wedge bolt 47)
1403181 130 15 1817 305 Not countersunk (wedge bolt 53)
1403212 130 15 2122 305 Not countersunk (wedge bolt 53)
1405181 140 16 1817 305 CAT 14 G (3/4” holes) slide plate
1405212 140 16 2122 305 CAT 14 G (3/4” holes) slide plate
1415181 140 16 1817 305 CAT 14 G (16 mm holes) slide plate
1415212 140 16 2122 305 CAT 14 G (16 mm holes) slide plate
Economic Plate
PartNumber
Dimension mmW T L
Holespacing Notes
1408200 80 12 2000 305 For repair and rebuilding of plow equipment
Wedge Bolts
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Wedge bolt
PartNumber Description Notes
1810001 16 x 47 Package of 25 pcs
1810002 16 x 53 Package of 25 pcs
1810003 16 x 53 special, larger grooves Package of 25 pcs (6-13 mm blade)
1810004 16 x 65 Package of 25 pcs
For Grader and Snow Plough Blade
Wedge
Part Number Description Notes
1820001 18,5 Replaced by 1820004
1820002 20,5 Replaced by 1820004
1820003 22,5 Replaced by 1820005
1820004 20,5 Unit wedge Package of 25 pcs (10-13 mm blade)
1820005 24,5 Unit wedge Package of 25 pcs (6-9 mm blade)
1820006 26,5 Package of 25 pcs (6 mm blade)
1820007 18,5-22,5 Expanded wedge Package of 25 pcs (8-13 mm blade)
For Grader and Snow Plough Blades
A handling charge will be added if the package is broken.
Wedges
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Wedge bolt
PartNumber Description Notes
1810001 16 x 47 Package of 25 pcs
1810002 16 x 53 Package of 25 pcs
1810003 16 x 53 special, larger grooves Package of 25 pcs (6-13 mm blade)
1810004 16 x 65 Package of 25 pcs
For Grader and Snow Plough Blade
Wedge
Part Number Description Notes
1820001 18,5 Replaced by 1820004
1820002 20,5 Replaced by 1820004
1820003 22,5 Replaced by 1820005
1820004 20,5 Unit wedge Package of 25 pcs (10-13 mm blade)
1820005 24,5 Unit wedge Package of 25 pcs (6-9 mm blade)
1820006 26,5 Package of 25 pcs (6 mm blade)
1820007 18,5-22,5 Expanded wedge Package of 25 pcs (8-13 mm blade)
For Grader and Snow Plough Blades
A handling charge will be added if the package is broken.
Wedgebolt Washers
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Accessory Kit
PartNumber Accessory Kit Notes
1880002 For mounting plate 1402181, 1402212 Countersunk
1880003 For mounting plate 1403181, 1403212 Not countersunk
1880006 For mounting plate 1405181, 1405212 CAT 14 G (3/4” hole)
1880007 For mounting plate 1415181, 1415212 CAT 14 G (16 mm hole)
Plate
PartNumber Description Notes
1850070 No 70 Package of 25 pcs, flat
1850080 No 80 Package of 25 pcs, curved
1850865 No 80.65 Package of 25 pcs, slide plate
A handling charge will be added if the package is broken.
PartNumber
Accessory Kit Description
Num-bers Notes
1850070 1880002 Flat plate 70 13 For mounting plate. 1402181, 1402212
1831037 Bolt FH M16x37 13
1842001 Trilock nut M16 13
1831065 Bolt FH M16x65 28
1831090 Bolt FH M16x90 4
1841001 Flange nut M16 32
Content in the Accessory Kits above
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Spade Cutting Edges
PartNumbers
Dimensions mmW W1 T L L1 Notes
7692217 331 102w 20 2300 600 Non drilled
7693206 350 102 25 2500 650 Non drilled
7693775 350 102 25 2550 700 Non drilled
7694168 410 162 30 2650 800 Non drilled
7675305 400 130 35 2850 850 Non drilled
7695680 450 245 35 2880 850 Non drilled
7695693 480 245 35 2880 850 Non drilled
7696586 590 272 40 3230 850 Non drilled
7696343 620 272 40 3430 850 Non drilled
7696365 620 272 40 3650 850 Non drilled
7697617 490 175 45 3200 850 Non drilled
7790127 790 352 65 3970 692 Non drilled
Spade Cutting Edges
PartNumbers
Dimensions mmW W1 T L L1 Notes
4204693 480 205 35 2880 850 Drilled
4206274 480 205 35 2880 850 Drilled
4204585 565 272 40 3030 850 Drilled
4204586 590 272 40 3230 850 Drilled
4206280 590 272 40 3230 850 Drilled
4206001 620 272 40 3430 850 Drilled
4204126 790 352 65 3970 692 Drilled
BOROX 500
BOROX 500
Other dimensions quoted on request.Mecanical properties according to data sheet for Borox 500.
Spade Base Edge
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Spade Cutting Edges
PartNumbers
Dimensions mmW W1 T L L1 Notes
7692217 331 102w 20 2300 600 Non drilled
7693206 350 102 25 2500 650 Non drilled
7693775 350 102 25 2550 700 Non drilled
7694168 410 162 30 2650 800 Non drilled
7675305 400 130 35 2850 850 Non drilled
7695680 450 245 35 2880 850 Non drilled
7695693 480 245 35 2880 850 Non drilled
7696586 590 272 40 3230 850 Non drilled
7696343 620 272 40 3430 850 Non drilled
7696365 620 272 40 3650 850 Non drilled
7697617 490 175 45 3200 850 Non drilled
7790127 790 352 65 3970 692 Non drilled
Spade Cutting Edges
PartNumbers
Dimensions mmW W1 T L L1 Notes
4204693 480 205 35 2880 850 Drilled
4206274 480 205 35 2880 850 Drilled
4204585 565 272 40 3030 850 Drilled
4204586 590 272 40 3230 850 Drilled
4206280 590 272 40 3230 850 Drilled
4206001 620 272 40 3430 850 Drilled
4204126 790 352 65 3970 692 Drilled
BOROX 500
BOROX 500
Other dimensions quoted on request.Mecanical properties according to data sheet for Borox 500.
Borox International AB, Oxelösund, Sweden • Phone: +46(0)155 26 48 80 • www.borox.com
Heal Plate
PartNumbers
Dimensions mmW T L
4542221 250 20 250
4512174 280 20 400
4512838 280 20 400
4562033 300 20 550
4593811 350 25 600
4543580 387 25 570
4593958 580 25 570
4573470 420 25 600
4555674 260 35 308
4545881 260 35 330
4575282 400 35 570
4598250 450 50 816
4588241 500 50 640
Other dimensions quoted on request.Mecanical properties according to data sheet for Borox 500.
BOROX 500
Trapezoid Base Edge
BLUE STEEL FOR GRADERS AND PLOWS
BX5 BX500 BLUE STEEL HARDWARE
Wear PlateWear Strips
Available in hardness from 450HB - 500 HB
CARBIDE FLAT SERIESAVAILABLE IN : 7/8" X 5" - 7/8" X 6" - 3/4" X 6"
PART # LENGTH WIDTH
CB40 9-7/16’’ 1-9/16’’CB90 - -
CB100 9-7/16’’ 3-15/16’’CB130 9-7/16’’ 5-1/8’’
PART # DIAMETER
WB90 3-1/2’’WB115 4-1/2’’WB150 5-7/8’’
CHOCKY BARSMade from 700 Brunell high chromium white iron weldable mild
steel backing plate.
WEAR BUTTONS Made from 700 Brunell high chromium white iron
with weldable mild steel backing plate.
LONGEVITY | DURABILITY | PERFORMANCECURVED CARBIDE SPACKLED SERIES - 1" X 7”
CARBIDE SNOW PLOW EDGES
MAGNUM WEAR PARTS | P: 780-978-2895
CARBIDE SNOW PLOW EDGES
MAGNUM WEAR PARTS | P: 780-978-2895
CARBIDE TIPPED CUTTING TOOLS, CONICAL BITS AND BOARDSfor SCARIFIER GRADER BLADE SYSTEMS
DURABILITY - Tungsten Carbide Tipped cutting tools outlast all-steel blades.
SAVE TIME - Worn cutting tools may be replaced individually and independantly of the blade section & bolts, without the need for special tools!
LONGER LIFE - Rotating cutting tools are self-sharpening for more uniform wear and longer life.
ENSURE EVEN CUTTING HEIGHT - Even cutting height is maintained as cutting tools may be rotated form position to position.
PROVEN PERFORMANCE & VERSATILITY - Exceptional cutting action proven on even the tough test surfaces:
• Dirt & gravel road maintenance• Hard-packed snow & ice removal• Chip & seal road reclamation
BLADE SELECTION GUIDE FOR VARIOUS MOLDBOARD LENGTHSUse the following table to determine the length and number of blades required to outfit your grader with a scarifier system. (The length of your moldboard determines how many 3ft. or 4ft blade sections you will need.)
LENGTH OF MOLDOARD
SIZE & QUANTITY OF SCARIFIER BLADE SECTIONS REQUIRED FOR 1
MOLDBOARD ASSEMBLYNUMBER OF
CUTTING TOOLS REQUIRED
3 Ft (914mm) Sections
4 Ft (1219mm) Sections
12 Ft 0 3 7213 Ft 3 1 7814 Ft 2 2 8416 Ft 0 4 96
PART # LENGTH WIDTH THICKNESS ON FLAT
BOLT HOLE SIZE
# OF BOLT HOLES
THICKNESS ON ROUND
BIT HOLE SIZE
# OF BIT HOLES
E127X25X1219CBCRW 48’’ 5‘‘ 1’’ 7/8’’ 9 2-1/4’’ 7/8’’ 24
E127X25X1219CBCRW34 48’’ 5’’ 1’’ 3/4’’ 9 2-1/4’’ 7/8’’ 24
E127X25X914CBCRW 36’’ 5’’ 1’’ 3/4’’ 9 2-1/4’’ 7/8’’ 24
E127X25X914CBCRW34 36’’ 5’’ 1’’ 3/4’’ 7 2-1/4’’ 7/8’’ 18
E127X32X1219CTSGB 48’’ 5’’ 1-1/4’’ 3/4’’ 9 2-1/4’’ 7/8’’ 18
E127X32X914CTSGB 36’’ 5’’ 1-1/4’’ 3/4’’ 7 2-1/4’’ 7/8’’ 18
PART # GR83/4-5/8
ALSO AVAILABLE: MOLDBOARD REDUCER BUSHINGS
(REDUCES 3/4’’ HOLES TO 5/8’’ HOLES)
CONICAL BIT BOARDS
• Tar sand road reclamation• Spot asphalt milling• Mising calcium chloride, magnesuium chloride or other dust suppressants.
CARBIDE SPACKLED SERIES - 7”
CARBIDE FLAT SERIES
MAGNUM WEAR PARTS | P: 780-978-2895
PART # - FEATURES & BENEFITS SPECIFICATIONS PICTURE
C87WFRKCSB .841 Lbs/Pc (50 pcs/Box)
- Superior wear & rotation- Washer keeps out debris & improves rotation = longer life & less block wear- Full-sleeve retainer pro-tects the inside of the bore to prevent uneven wear- Washer precompresses the retainer hic h makes it easeir to install - Retainer grips tighter to prevent Bit loss
C858KCSB.840 Lbs/Pc (50 pcs/Box)
- Longest wearing carbide tip-For use on all types of road surface-Specially designed tip for extra long tool life & added steel-wash protection-1.45’’ (37mm) diameter cut-ting tool shoulder protects block face from excessive wear
C855HD.540 Lbs/Pc (50 pcs/Box)
- Larger carbide tip than similar competitive tools-Improved with 30% stron-ger braze-Blunt-nose tip style-Fits competitive blade systems
C855HDX.597 Lbs/Pc (50 pcs/Box)
- Larger Carbide tip than similar competitive tools -Improved with 30% stron-ger braze-Same body style as C855HD but with added steel for increased strength & wear life-Fits competitive blade systems
PART # - FEATURES & BENEFITS SPECIFICATIONS PICTURE
K1LW-2244-2869.535 Lbs/Pc (50 pcs/Box)
- Similar to the C855HD- Rounded tip- Square retainer pro-tects pocket-Extra shoulder for more wear
C87KCSBSR .815 Lbs/Pc (50 pcs/Box)
- Same design as C858KCSB with added “barbed” short retainer for improved cutting tool retention.
C3R. 70Lbs/Pc (50 pcs/Box)
C31RHD1.50 Lbs/Pc (50 pcs/Box)
CARBIDE-TIPPED CONICAL BITS
MAGNUM WEAR PARTS | P: 780-978-2895
PART # - FEATURES & BENEFITS SPECIFICATIONS PICTURE
MCS-23F1.10 Lbs/Pc (50 pcs/Box)
RX4-01.70 Lbs/Pc (50 pcs/Box)
RP18. 60 Lbs/Pc (50 pcs/Box)
PART # - FEATURES & BENEFITS SPECIFICATIONS PICTURE
C87B.950 Lbs/Pc (50 pcs/Box)
- Replacement Tool holder-Easily welded with 7018 or 8018 low-hydrogen rod-No pre-heating re-quired
C87E1.05 Lbs/Pc (50 pcs/Box)
- Replacement Tool-holder
CARBIDE-TIPPED CONICAL BITS
MAGNUM WEAR PARTS | P: 780-978-2895
SWEEPER BRUSHES
Our Brushes are available for numerous machines and in various sizes. Available in Poly, Wire, and Poly-Wire combinations.
PART # MATERIAL STYLE INSIDE DIAMETER
OUTSIDE DIAMETER
1027P POLY FLAT 10’’ 27’’1027W WIRE FLAT 10’’ 27’’1032CC POLY / WIRE COMBO CONVOLUTED 10’’ 32’’1032P POLY FLAT 10’’ 32’’
1032PC POLY CONVOLUTED ZIG ZAG 10’’ 32’’10SP - SPACER 10’’ -
63821CC POLY / WIRE CONVOLUTED ZIG ZAG 6-3/8’’ 21’’63821P POLY FLAT 6-3/8’’ 21’’
63821PC POLY CONVOLUTED ZIG ZAG 6-3/8’’ 21’’63821WC WIRE CONVOLUTED ZIG ZAG 6-3/8’’ 21’’63824CC POLY / WIRE COMBO CONVOLUTED 6-3/8’’ 24’’63824P POLY FLAT 6-3/8’’ 24’’
63824PC POLY CONVOLUTED ZIG ZAG 6-3/8’’ 24’’
TUBE BROOMS - MAINBROOMS - GUTTER BROOM - STRIP BROOMS
Available For All Sweeper Makes:
+ Elgin+ Johnston+ Mobil+ Schwartze+ Stewart+ Tymco+ Broce+ Sweepster+ Rosco+ & More...
M-B COMPANIES
**Common sizes listed above, every size available
M-B wafers are made with high quality raw materials that remain resilient regardless of the sweeping condition. Expertly assembled in the U.S.A. All wafers can be sold as part of refill kits for M-B attachment sweepers or purchased individually to match customer requirements. Polypropylene, poly/wire combo, and all wire brushes available in all sizes to fit all sweeper manufacturers. Your choice between flat or convoluted wafer.
Polypropylene - Used when nominal cutting forces are required. The flicking action of the poly bristle provides superior casting distance.
Wire - Creates an aggressive cutting action for packed surfaces including dirt and ice.Poly/Wire Combo - Best of both materials (poly for flicking and wire for cutting) which creates the best all purpose brush for all seasons.
V-Shaped Spacer - Unlike other manufacterers that use a U-shaped spacer, M-B utilzes a spacer that is V shaped which acts as a spring on the brush core to create a tighter fit among all of the wafers.
Compatible manufacturers: Balderson, Bobcat, Broce, Case, Catepillar, Holder, Kanlan, Kubota, John Deere, Eddynet, Lay-Mor, New Holland, Sweepster, Superior Broom, Waldon, York, and more!
M-B tube brooms, main brooms and strip brooms are compatible with most street sweepers in the market today. All brooms are made from the highest quality of virgin polypropylene. All Poly, poly/wire, and heavy duty options are available for most street sweepers. Due to the high broom wrap and high quantity of bristle ends per square inch, our tube brooms have excellent sweeping performance and is effective in debris collection. All tube brooms are expertly assembled in the U.S.A.
Compatible manufacturers: Elgin, Gravely, Johnston, Challenger, Mobil, Schwarze, Rosco, Broce, Steiner, Sunvac, Wayne, Tennant, Tymco, Vacall, Superior, Vanguard, and more!
M-B gutter brooms last long and remain resilient use after use. Our gutter brooms are compatible with most street sweepers and vacuum brooms. We utilize a field tested, durable patented wire and a high impact co-polymer block with each segment. Our patented wire tested better than our oil-tempered counterparts and is a more environmentally friendly. Options include the amount of wire per hole and an all poly brush. Different styles of blocks are available to match your gutter broom requirements. Each gutter broom segment is expertly assembled in the U.S.A.
Compatible manufacturers: Allianz, Mobil, Elgin, Johnston, Masco, Nitehawk, Schwarze, Tennant, Tymco, Vacall, Wayne, Challenger, Victory, Stewart-Amos, Vanguard, Bobcat, an more!(Loose or bundled flattened gutter wire is also available for purchase.)
MAGNUM WEAR PARTS | P: 780-978-2895
SWEEPER WAFERS
GUTTER BROOMS
TUBE BROOMS - MAINBROOMS - STRIP BROOMS
M-B COMPANIES
MAGNUM WEAR PARTS | P: 780-978-2895
PART # DESCRIPTION A B C16N 1/2’’ NUT 1/2’’ 3/4’’
4F3651 1/2’’ X 2-1/2’’ PLOW BOLT 1/2’’ 2-1/2’’ 1-1/2’’’4K0367 5/8’’ NUT 5/8’’ 7/8’’’5P8247 5/8’’ FLAT WASHER 5/8’’ 1-1/4’’
5P8247LW 5/8’’ LOCK WASHER 5/8’’ 1’’4F3654 5/8’’ X 2’’ PLOW BOLT 5/8’’ 2’’’ 1-3/8’’3F5108 5/8’’ X 2-1/4’’ PLOW BOLT 5/8’’ 2-1/4’’ 1-5/8’’4F3656 5/8’’ X 2-1/2’’ PLOW BOLT 5/8’’ 2-1/2’’ 1-5/8’’4F3657 5/8’’ X 2-3/4’’ PLOW BOLT 5/8’’ 2-3/4’’ 1-1/2’’4F3658 5/8’’ X 3’’ PLOW BOLT 5/8’’ 3’’ 1-1/2’’4F3665 5/8’’ X 3-1/2’’ PLOW BOLT 5/8’’ 3-1/2’’ 1-5/8’’4F3671 5/8’’ X 4’’ PLOW BOLT 5/8’’ 4’’ 1-3/4’’4F3671 5/8’’ X 4’’ PLOW BOLT 5/8’’ 4’’ 1-3/4’’2J3506 3/4’’ NUT 3/4’’ 1-1/8’’5P8248 3/4’’ FLAT WASHER 3/4’’ 1-3/8’’
5P8248LW 3/4’’ LOCK WASHER 3/4’’ 1-1/4’’
4F7827STR 3/4’’ HEAD X 5/8’’ SHAFT X 2-1/4’’ REDUCER BOLT 3/4’’ 2-1/4’’ 1-1/4’’
4F7827 3/4’’ X 2-1/4’’ PLOW BOLT 3/4’’ 2-1/4’’ 1-1/2’’5J4773 3/4’’ X 2-1/2’’ PLOW BOLT 3/4’’ 2-1/2’’ 1-3/4’’5J4771 3/4’’ X2-3/4’’ PLOW BOLT 3/4’’ 2-3/4’’ 1-3/4’’4F0138 3/4’’ X 3’’ PLOW BOLT 3/4’’ 3’’ 2’’5F8933 3/4’’ X 3-3/4’’ PLOW BOLT 3/4’’ 3-3/4’’2J3505 7/8’’ NUT 7/8’’ 1-1/4’’5J2409 7/8’’ X 3’’ PLOW BOLT 7/8’’ 3’’ 1-5/8’’2J2548 7/8’’ X 3-1/2’’ PLOW BOLT 7/8’’ 3-1/2’’ 2-1/4’’2J5458 7/8’’ X 4-1/4’’ PLOW BOLT 7/8’’ 4-1/4’’ 1-3/4’’2J3507 1’’ NUT 1’’ 1-1/2’’4F4042 1’’ X 3’’ PLOW BOLT 1’’ 3’’ 2-1/4’’4J9208 1’’ X 3-1/2’’ PLOW BOLT 1’’ 3-1/2’’ 2-3/8’’1J8928 1’’ X 3-3/4’’ PLOW BOLT 1’’ 3-3/4’’ 2-3/8’’5P8136 1’’ X 4’’ PLOW BOLT 1’’ 4’’ 2-3/8’’3K9770 1-1/4’’ NUT 1-1/4’’ 1-7/8’’
5P88203 1-1/4’’ X 4’’ PLOW BOLT 1-14’’ 4’’ 2’’6V8360 1-1/4’’ X 4-1/2’’ PLOW BOLT 1-1/4’’ 4-1/2’’ 2-3/8’’5P8361 1-1/4’’ X 5’’ PLOW BOLT 1-1/4’’ 5’’ 1-1/2’’
GRADE 8/10 PLOW BOLTS, NUTS, WASHERS
SIZE WORKING LOAD LIMIT (LBS) DIMENSIONS (IN)
PART #WEIGHT
EACHlbsTONS LBS KG A B C D E
2 4,000 1.0 3.1 3.6 1.3 0.9 G8WBHL2T 1.8
3 6,000 1.2 4.5 4.1 1.4 1.1 G8WBHL3T 2.6
5 10,000 1.7 6.1 5.1 1.7 1.3 G8WBHL5T 5.1
8 16,000 2.0 6.3 5.3 2.0 1.4 G8WBHL8T 7.2
10 20,000 2.2 7.8 6.6 2.1 1.9 G8WBHL10T 11.4
WELD-ON BUCKET HOOKS Grade 80 weld -On bucket hooks (equipment hooks)with HD latches
BUCKET HARDWARE AND ACCESSORIES
MAGNUM WEAR PARTS | P: 780-978-2895
HEAT TREATED GROUSER BAR All sizes available in 10ft standard lengths - carbon-boron steel facilitates weld-ability. Heat treated to Rockwell hardness of 42-44 HRC optimum wear performance & durability for extreme working conditions.
STANDARD ICE LUGSTOLL FREE PHN: 1-888-507-9734 TOLL FREE FAX: 1-888-507-9724
GROUSER BAR QUANTITY CHART
TO 3/4’’ SCALE
Available from stock in 3’’ & 4’’ Lengths in:TYPE L (BROWN)TYPE K (ORANGE)
TYPE E (DARK BLUE)TYPE C (GREY)
Other Lengths and Types available upon request
Chart figures indicate the MINIMUM Number of 10 Foot LENGTHS of Grouser Retread Bar required.
GROUSER BAR Types & Specs on reverse side
3’’ 4’’
OVAOVOVAAOVOVAA
GROUSER RETREAD BARSTANDARD GROUSER BAR All sizes available in 10ft standard lengths - High quality work-hardening steel.
FORGED ICE LUGS & GROUSER BAR
ICE LUGSForged Ice Lugs Available in all sizes - Pre-Cut at 2" / 3" / 4"
All ice lugs are shear cut.
MAGNUM WEAR PARTS | P: 780-978-2895
NONE
DOUBLE
STANDARD
REVERSE
SQUARE EDGE FLAT
SINGLE BEVEL FLAT
DBL BEVEL FLAT
DBL BEVEL CURVED
PARALLEL BEVEL FLAT
HALF ARROW FLAT
HOT CUPPED LEVEL CUTLOADER CORNER
Please �ll in ALL the dimensions on the edge chart below:
Countersink (circle type required) Section (circle type required)
Corner Bits for Loaders & BulldozersMaterial Thickness: No. of Bolt Holes: Bolt Hole Size: Bolt Size:
Company:
OEM Part No:
Address:
Machine Make & Model:
Blade Thickness:
Bolt Size:No. of Bolt Holes:
Bolt Hole Size:
Hole Type (circle): Round | Square | Square Countersunk | None
Blade Type (circle): Base Edge | Cutting Edge
CUTTING EDGE WORKSHEET
Other important info:
Toll Free Fax:1-888-507-9724Toll Free Ph: 1-888-507-9734 CUTTING EDGE WORKSHEET
MAGNUM WEAR PARTS LOCATIONS: GRANDE PRAIRIE - 780-978-2895#23 - 10322 74th Ave Clairmont, AB T0H0W1justin.brown @ magnumwearparts.com
FORT ST JOHN - 250-262-9482 10120 Alaska Rd Fort St John, BC V1J 1A8 magnumweardt @ gmail.com
KAMLOOPS - 250-794-7262 1675 Rose Hill Road Kamloops, BC magnumwear@ gmail.com