View
17
Download
0
Category
Preview:
Citation preview
Bulk Solids Dilution SkidBulk Solids Dilution Skid Ross Systems & Controls
APPLICATION Bulk Solids Dilution for pH
Control
INDUSTRY Specialty Metals
KEY NOTES Turn-Key Skid
Reduced Batch Time SLIM Systems
Sealed Dust-Tight System Full Factory Test
Metered Solids Injection Hastelloy Construction Full Manual Controls Password Security
Automated Controls Automated Valves
Heavily Corrosive Against Stainless Steal
Operator Interface
Turn-Key Advantages:
• Single Source Responsibility
• Factory Acceptance Test
• Simplified Project Management
• Reduced Scheduling
• Complementary Systems
• Reduced Installation Time
• Centralized Utilities
• Reduced Budget Risks
• Increased R.O.I
• System Training
• True Portability
Material Handling Systems
Ross Systems & Controls •34 Westgate Blvd • Savannah, Georgia 31405 Phone: 912.238.5800 • Fax: 912.238.1905 • Toll Free 866.SysCon.0 (866.797.2660) • Mail@RossSysCon.com
Superior SysConSuperior SysConSuperior SysCon SystemsSystemsSystems
SysCon Services
Project / System Conception
Design and Engineering
PLC & HMI Programming
Recipe Based Controls
Data Acquisition Systems
Panel Construction
Automated Machine & Process Construction
On Site Installation, Start-up &
Technical Assistance
Pump / Chemical Feed Skids
Dilution Skids
Potable Water Pump Skids
Powder / Liquid Mixing Systems
Heat Trace Systems
Fiber Optic / Ethernet Communications Networks
And more…...
Application: The bulk solid material was highly corrosive when mixed with water. Existing
systems were falling apart. Not to mention the existing mixing of the solid was far less than
acceptable. First, the customer’s existing system lost up to 20% of the raw material due to
the open construction. Second, the mixing was so poor that another 30% of the raw material
settled out of the dilution stream. The customer was aware of the systems available on the
market, but did not have the time nor the in-house engineering to fix the system. Ross
Systems & Controls was commissioned to engineer a single turn-key system.
Application Specialist: To even attempt an application of this complexity required multiple
skill sets; mixing, electrical, process automation and mechanical / structural engineering.
The end user had no room for error and an unyielding schedule. The Batch Dilution system
dramatically improves powder induction in a liquid stream. The unique rotor/stator in the
SLIM system is the first to include “Progressive Spiral Porting,” which produces high flow,
high shear, and a high level of vacuum within the rotor/stator generator. This enables the
system to induct powders at unprecedented rates. This results in shorter mixing cycles,
improved end-product quality, and a safer working environment by eliminating “dusting” in
the plant. Call Ross with your demanding applications.
Ross Systems & Controls
DilutionSkid052002
Location: Non-Hazardous / Production Floor
Design: Custom, replace existing manual process.
Mixer: Ross ME401SB/15 with SLIM
Material of Construction: 316SS for all dry product
contact parts. Hastelloy / CPVC for all wetted parts
Material Handling: (1) Dust Tight Bulk Bag System,
(1) Volumetric Screw Feeder, (3) 2” Ball Valves with
Pneumatic Actuators, (2) 1” Steam Valves
Mounted on a skid with fork channels.
Controls: Automatic Feeder Control • Automatic Mix
Cycle • Automatic Wash Cycle • Graphical Operator
Interface • PLC control • Process and system failure
alarms • Operator notification during batch steps •
Integration: Ross designed the system to allow for
single point utilities. Three phase electrical, com-
pressed air, raw water feed pipe, solution discharge
and drain.
Bulk solids handling system allow for quick payback
through raw material savings. They also pose many
potential integration issues. Contact Ross Systems &
Controls to handle these issues for you. Consider the
advantages of testing in a controlled fabrication at-
mosphere and installation in a fraction of the time.
Bulk Solids Dilution Skid
Ross Systems & Controls •34 Westgate Blvd • Savannah, Georgia 31405 Phone: 912.238.5800 • Fax: 912.238.1905 • Toll Free 866.SysCon.0 (866.797.2660) • Mail@RossSysCon.com
YOUR ROSS LOCAL REPRESENTATIVE
Recommended