91262-12.4 PAGE 1

FS-4-WHWHITESQUARE FLANGELESS TRIM

All No. 8 Lighting fixtures and components are UL/CSA listed. No. 8 Lighting trims and lamp modules are protected by one or more U.S. Patents. No. 8 Lighting reserves the right to change details of design, materials, and finish.

© 2020 No. 8 LightingDoc # 91262-12.4

Housing + Light Engine + Power Supply• 400-R Patented fixture assembly for REMODEL applications. Includes INTEGRAL power supply (standard)

or RT REMOTE mounted power supply (optional). Accommodates a wide range of ceiling thicknesses without affecting aiming or adjustment.

• Airtight and IC-Rated for direct contact with standard thermal insulation with a max combined R-Value of R42 (may also be installed in Non-IC applications). Meets Washington State Airtight Standard WAC 51-11-0502 and is in accordance with ASTM E283 to reduce energy loss.

• Fully adjustable lamp module features patented tool-free adjustment mechanism optimized for true 0-35° vertical and 360° horizontal adjustment. Use for adjustable accent, wall wash*, and general lighting ap-plications. *For wall washing: specify 40° optic option with HI, WD, or WD-2 LED, or 10° optic option and FL lens with HI-2 LED. Requires WW-4 wall wash accessory.

LED Options• HI 3000K 92+ CRI White LED. Minimum 2-Step color binning.• HI-2 3000K 92+ CRI White LED. Minimum 2-Step color binning. Note: For use with 10° optic option only. • WD 3000-1800K 97+ CRI Warm Dim LED. Minimum 3-Step color binning.• WD-2 2800-2200K 95+ CRI Warm Dim LED. Minimum 3-Step color binning. Note: To ensure fixture to fixture color consistency, use of the same LED option with adjacent fixtures is recommended.Optic Options and Accessories• Optic options include: 10°, 15°, 25°, and 40°. Note: 10° optic option for use with HI-2 LED option only. • Optional beam enhancing lens accessories include: NSP-Narrow Softening, NFL-Medium Softening, FL-

Wide Softening, WFL-Extra Wide Softening, and LS-Linear Spread.• Optional color filtering lens accessories include: CF24-2400K, CF27-2700K, & CF35-3500K.Dimming Options• DIM1-4-R (Standard) Phase dimming LED driver with 120v/60Hz input. Dimmable to 1% using compatible

Forward or Reverse-Phase dimmers.• DIM2-4-R 0-10v dimming LED driver with universal 120-277v/60Hz input. Dimmable to 1% using compat-

ible 0-10v dimmers.• PR1-4-R Premium phase dimming LED driver with 120v/60Hz input. Dimmable to 0.1% using compatible

Forward or Reverse-Phase dimmers.• EL1-4-R EldoLED 0-10v dimming LED driver with 120-277v/60Hz input. Dimmable to 1% using compatible

0-10v dimmers.• EL2-4-R EldoLED DALI dimming LED driver with 120-277v/60Hz input. Dimmable to 1% using compatible

DALI dimmers.• LU1-4-R Lutron Hi-lume LTEA2W 1% 2-wire LED driver (120v Forward Phase only). 120v/60Hz input. • LU1-4-R-RT* Remote Lutron Hi-lume LTEA2W 1% 2-wire LED driver (120v Forward Phase only). 120v/60Hz input. • LU2-4-R Lutron Hi-lume LDE1 1% EcoSystem LED driver w/ Soft-on, Fade-to-Black. 120-277v/60Hz input.• LU2-4-R-RT* Remote Lutron Hi-lume LDE1 1% EcoSystem LED driver w/ Soft-on, Fade-to-Black. 120-277v/60Hz input.• LU4-4-R Lutron Hi-lume Premier PEQ0E 0.1% EcoSystem LED driver w/ Soft-on, Fade-to-Black. 120-277v/60Hz input.*RT Remote mounted LED drivers can be mounted up to 100ft from fixture using 12AWG Class 2 stranded wire. See wire length table on Page 3.For complete list of compatible dimmers, see 8lighting.com/resources-downloadsOutput*• 1000 Standard output. Delivers up to 1077 lumens.• 1000-WD Standard output - Warm Dimming. Delivers up to 813 lumens.*Output may vary depending on optical accessories used.For photometric files in PDF and IES formats, see 8lighting.com/400-series-photometryTrim Options• FS-4-WH Flangeless SQUARE 2” Aperture – WHITE. Field paintable to match ceiling finish.• FR-4-WH Flangeless ROUND 2” Aperture – WHITE. Field paintable to match ceiling finish.Trim Accessories• CL4 CLEAR lens factory installed in trim plate.• SF4 SOFT FOCUS lens factory installed in trim plate.• WW-4 WALL WASH accessory factory installed in trim plate.

Project Name

Date

Prepared By

Comments

Catalog #400-R – – – – / – / -

Type

526 Portal Street

Cotati, CA 94931

USA

P 707.794.0888

F 707.795.4379

www.8lighting.com

PRODUCT FEATURES

400-R REMODEL IC/AT RATED ADJUSTABLE LEDFS-4/FR-4 FLANGELESS TRIM 2” APERTURE

400-RHOUSING + LIGHT ENGINE + POWER SUPPLY

FR-4-WHWHITEROUND FLANGELESS TRIM

OPTICAL ACCESSORIES(Optional)

Power Supply/Junction Box

FS-4 TrimMounting Bracket

400-R Housing + Light Engine

FS-4Trim Plate

FS-4 TrimRTRemote mountedpower supply (optional)

91262-12.4 PAGE 2

400-R – – – – / – / –

DIM1-4-R (Standard)Forward or Reverse-Phase 1% DimmingDIM2-4-R0-10v 1% DimmingPR1-4-R*Forward or Reverse-Phase 0.1% DimmingEL1-4-REldoLED 0-10v 1% DimmingEL2-4-R EldoLED DALI 1% Dimming LU1-4-RLutron Forward-Phase 1% DimmingLU1-4-R-RTRemote Lutron Forward-Phase 1% DimmingLU2-4-RLutron 1% EcoSystem DimmingLU2-4-R-RTRemote Lutron 1% EcoSystem DimmingLU4-4-RLutron 0.1% EcoSystem Dimming*Not available with WD or WD-2 LED options

PRODUCT SPECIFIER/PRODUCT ORDER NUMBER

HOUSING + LIGHT ENGINE + POWER SUPPLY

OPTICOPTIONS

TRIMACCESSORIES

(Optional)

400-RHousing + Light Engine + Power Supply for REMODEL applicationsAIRTIGHT and I.C. RatedAdjustable LED with 0-35° Tilt and 360° Rota-tion

10*10°Very Narrow Spot

1515°Narrow Spot

2525°Narrow Flood

4040°Flood *For use with HI-2 LED only

FS-4-WHFlangeless SQUARE 2” Aperture WHITE

CL4*CLEAR lens SF4*SOFT FOCUS lensWW-4*WALL WASH accessory*UL Wet listed

NSPNarrow Softening LensNFLMedium Softening LensFLWide Softening LensWFLExtra Wide Softening LensLSLinear Spread LensCF242400K Color Filtering LensCF272700K Color Filtering LensCF353500K Color Filtering Lens

CEILING TYPES: Sheetrock CEILING THICKNESS: 1/2” Min to 5-1/2” Max* CUT-OUT: 6” x 6” or Ø 6”*Note: For ceiling thicknesses over 1-1/4” use longer screws (not supplied)

– – – – / DIMMING OPTIONS – OUTPUT / TRIM –

HI3000K White LED

HI-2* 3000K White LED

WD3000-1800K Warm Dim LED

WD-22800-2200K Warm Dim LED*For use with 10° optic only

LEDOPTIONS

1000Standard output1000-WDStandard output – Warm Dimming

Optic Options and Accessory NotesOne field interchangeable optic included standard. Up to two additional optical acces-sories can be accommodated. Trim Accessory Notes Trim lens accessories are factory installed into trim plates and are UL WET LISTED and rated for use in DRY, DAMP, or WET locations (covered ceiling applications only). Not for use in steam applications.Trim Finish Notes White trim finish is field paintable to match ceiling color.

FR-4-WHFlangeless ROUND 2” Aperture WHITE

Power Supply/Junction Box

FR-4 TrimMounting Bracket

400-R Housing + Light Engine

FR-4Trim Plate

FR-4 Trim

Ø 6” Cut-Out

RT*REMOTE Mounted Power Supply*Available with remote dimming options onlyLeave blank for integral dimming options

REMOTEOPTIONS

Installation NotesFor installations in direct contact with thermal insulation, ambient temperatures in ceiling space should not exceed 25°C (77°F) during normal operation. For installations where insulation is held back a minimum of 3” from sides and top, ambient tempera-tures in ceiling space should not exceed 40°C (104°F) during normal operation. Warranty All No. 8 Lighting products are by a 5 year limited warranty. For specific warranty details and limitations, see 8lighting.com/resources-downloads

400-R FIXTURE ASSEMBLY with FS-4/FR-4 FLANGELESS TRIM - REMODEL MOUNTING

Clear polycar-bonate dust and over-spray shield included with every fixture. Use to

protect internal components and pro-vide work light during construction.

JA8-2019 CA Title 24 Compliant except with dimming option EL2-4-R.

91262-12.4 PAGE 3

6” OPENING

5 -1/16” TRIM PLATE

0°-35°

2” APERTURE

5 -1/2”

5/32”

1) 400-R REMODEL Housing + Light Engine Airtight + IC Rated installs from below finished ceiling.

2) Adjustable LED & Optics Features 0°- 35° tilt and 360° rotation with tool-less locking.

3) Sheetrock Accommodates ceiling thicknesses from 1/2” (min) to 5 -1/2” (max) without affecting aiming or rotation.

4) Flangeless Trim Flush mounts using 5/32” ceiling finish (drywall compound or plaster). Installs from below and sandwiches sheetrock through 6” cut-out. Standard screws (supplied) accommodate 1/2” to 1-1/4” thick sheetrock ceil-ing material. Use longer screws for ceilings over 1-1/4” thick.

5) Flangeless Trim Plate Features unique magnetic attachment. Mounts flush to finished ceiling.

6) Power Supply/Junction Box (shown) Installs from below finished ceiling and is accessible after installation. Dimensions: 6-7/16” L x 1-1/2” H x 3-7/8” W. RT Remote mounted LED driver/junction box (not shown) can be mounted up to 100ft from fixture using 12AWG Class 2 stranded wire. See wire length table.

7) WW-4 Wall Wash Accessory (optional).

1

62

5

3

4

7

Maximum Driver-to-LED Light Engine Wire Length Driver Model LU1R/LU2-4-R-RT-1000-WD LU1R/LU2-4-R-RT-1000 Wire Gauge 8 ft (2.5 m) 4 ft (1.2 m) 24 AWG (0.2 mm2) 13 ft (4 m) 6 ft (1.8 m) 22 AWG (0.34 mm2) 20 ft (6 m) 10 ft (3 m) 20 AWG (0.5 mm2) 30 ft (9 m) 15 ft (4.5 m) 18 AWG (.75 mm2) 35 ft (10.5 m) 25 ft (7.5 m) 16 AWG (1.5 mm2) 50 ft (15 m) 40 ft (12 m) 14 AWG (2.5 mm2) 100 ft (30 m) 60 ft (18 m) 12 AWG (4.0 mm2)

Wire Type: Stranded Class 2 wire (supplied by others)

400 SERIES PERFORMANCE SUMMARY

OPTICAL OPTIONS AND ACCESSORY PERFORMANCE SUMMARY

OPTICAL OPTIONS

10° Very Narrow Spot 14° 27° 46° 71° 14 x 52°

15° Spot 20° 27° 42° 61° 19 x 47°

25° Narrow Flood 27° 34° 47° 67° 26 x 52°

40° Flood 41° 42° 56° 68° 36 x 57°

Lens Lumen Multiplier 0.93 0.87 0.87 0.82 0.89

*Beam enhancing lens used in combination with 10°, 15°, 25°, or 40° optic to achieve desired beam spread

LED Output CCT CRI R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14

HI-2 1000 3000 93+ 1074-1077 14.0 77 94 96 98 94 94 96 93 84 63 91 95 83 95 98

HI 1000 3000 92+ 746-908 14.7 51-62 92 96 98 93 92 95 92 80 55 89 94 84 93 98

WD 1000-WD 3000-1800 97+ 658-813 14.6 45-57 99 99 96 98 99 97 98 97 93 97 96 85 99 97

WD-2 1000-WD 2800-2200 95+ 638-789 14.6 44-54 98 97 96 96 99 93 90 86 74 96 96 87 99 99

Delivered Lumens

SystemWattage

DeliveredLPW

BEAM ENHANCING LENS (OPTIONAL)*

+ NSP + NFL + FL + WFL + LS

400 SERIES w/ FS-4 CONE OF LIGHT DIAGRAMS

91262-12.4 PAGE 4

ST

AN

DA

RD

OU

TP

UT

–W

AR

M D

IM

2ft - 696fc Ø1.0 ft

4ft - 174fc Ø2.0 ft

6ft - 77.3fc Ø3.0 ft

8ft - 43.5fc Ø4.0 ft

10ft - 27.8fc Ø5.0 ft

12ft - 19.3fc Ø6.0 ft

25° Narrow FloodCBCP: 2,420

400-WD-25/1000-WD/FS-4

2ft - 438fc Ø1.3 ft

40° FloodCBCP: 1,771

4ft - 109fc Ø2.6 ft

6ft - 48.5fc Ø3.9 ft

8ft - 27.3fc Ø5.2 ft

10ft - 17.5fc Ø6.5 ft

12ft - 12.2fc Ø7.8 ft

400-WD-40/1000-WD/FS-4

2ft - 1,018fc Ø.8 ft

4ft - 254fc Ø1.6 ft

6ft - 113fc Ø2.4 ft

8ft - 63.6fc Ø3.2 ft

10ft - 40.7fc Ø4.0 ft

12ft - 28.3fc Ø4.7 ft

15° Narrow SpotCBCP: 4,070

400-WD-15/1000-WD/FS-4

10° Very Narrow SpotCBCP: 14,212

2 ft - 368 fc Ø1.5 ft

40° FloodCBCP: 1,470

4 ft - 91.9 fc Ø3.0 ft

6 ft - 40.8 fc Ø4.6 ft

8 ft - 23.0 fc Ø6.1 ft

10 ft - 14.7 fc Ø7.6 ft

12 ft-10.2 fc Ø9.1 ft

400-HI-40/1000/FS-4

2ft - 1,387fc Ø.6 ft

4ft - 347fc Ø1.3 ft

6ft - 154fc Ø1.9 ft

8ft - 86.7fc Ø2.6 ft

10ft - 55.5fc Ø3.2 ft

12ft - 38.5fc Ø3.9 ft

15° Narrow SpotCBCP: 5,549

400-HI-15/1000/FS-4

2ft - 696fc Ø1.0 ft

4ft - 174fc Ø2.0 ft

6ft - 77.3fc Ø3.1 ft

8ft - 43.5fc Ø4.1 ft

10ft - 27.8fc Ø5.1 ft

12ft - 19.3fc Ø6.1 ft

25° Narrow FloodCBCP: 2,784

400-HI-25/1000/FS-4

2 ft - 3,538 fc Ø0.4 ft

4 ft - 884 fc Ø0.9 ft

6 ft - 393 fc Ø1.3 ft

8 ft - 221 fc Ø1.7 ft

10 ft - 142 fc Ø2.2 ft

12 ft - 98.3 fc Ø2.6 ft

400-HI-2-10/1000-R/FS-4

ST

AN

DA

RD

OU

TP

UT

10° 15° 25° 40°

400 SERIES w/ FR-4 CONE OF LIGHT DIAGRAMS

2ft - 374fc Ø1.5 ft

40° FloodCBCP: 1,495

4ft - 93.4fc Ø3.0 ft

6ft - 41.5fc Ø4.5 ft

8ft - 23.4fc Ø6.0 ft

10ft - 15.0fc Ø7.5 ft

12ft - 10.4fc Ø9.0 ft

400-HI-40/1000/FR-4

2ft - 1,429fc Ø.6 ft

4ft - 357fc Ø1.3 ft

6ft - 159fc Ø1.9 ft

8ft - 89.3fc Ø2.6 ft

10ft - 57.1fc Ø3.2 ft

12ft - 37.7fc Ø3.8 ft

15° Narrow SpotCBCP: 5,714

400-HI-15/1000/FR-4

2ft - 699fc Ø1.0 ft

4ft - 175fc Ø2.0 ft

6ft - 77.6fc Ø3.1 ft

8ft - 43.7fc Ø4.1 ft

10ft - 27.9fc Ø5.1 ft

12ft - 19.4fc Ø6.1 ft

25° Narrow FloodCBCP: 2,794

400-HI-25/1000/FR-4

10° Very Narrow SpotCBCP: 14,200

2 ft - 3,538 fc Ø0.4 ft

4 ft - 884 fc Ø0.9 ft

6 ft - 393 fc Ø1.3 ft

8 ft - 221 fc Ø1.7 ft

10 ft - 142 fc Ø2.2 ft

12 ft - 98.3 fc Ø2.6 ft

400-HI-2-10/1000/FR-4

ST

AN

DA

RD

OU

TP

UT

- W

AR

M D

IM

2ft - 432fc Ø1.3 ft

40° FloodCBCP: 1,748

4ft - 108fc Ø2.6 ft

6ft - 48.0fc Ø3.9 ft

8ft - 27.0fc Ø5.2 ft

10ft - 17.3fc Ø6.5 ft

12ft - 12.0fc Ø7.8 ft

400-WD-40/1000-WD/FR-4

2ft - 990fc Ø.8 ft

4ft - 248fc Ø1.6 ft

6ft - 110fc Ø2.4 ft

8ft - 61.9fc Ø3.2 ft

10ft - 39.6fc Ø4.0 ft

12ft - 27.5fc Ø4.8 ft

15° Narrow SpotCBCP: 4,000

400-WD-15/1000-WD/FR-4

2ft - 601fc Ø1.0 ft

4ft - 150fc Ø2.0 ft

6ft - 68.8fc Ø2.9 ft

8ft - 37.5fc Ø3.9 ft

10ft - 24.0fc Ø4.9 ft

12ft - 16.7fc Ø5.9 ft

25° Narrow FloodCBCP: 2,431

400-WD-25/1000-WD/FR-4

ST

AN

DA

RD

OU

TP

UT

10° 15° 25° 40°

Trim Output CCT CRI R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14

FS-4/FLS-4 1000 3000 92+ 615 14.5 43 93 97 100 93 93 97 92 81 57 92 94 84 94 99

FR-4/FLR-4 1000 3000 92+ 578 14.5 40 93 97 100 93 93 97 92 80 57 92 94 84 94 99

400-HI-40/1000 w/ WW-4 WALL WASH LENS ACCESSORY PERFORMANCE SUMMARY

Delivered Lumens

SystemWattage

DeliveredLPW

LED Lumen Multipliers: For HI-2 LED with 10° optic and FL lens, use multiplier of 1.02. For WD LED with 40° optic, use multiplier of 0.93. For WD-2 LED with 40° optic, use multiplier of 0.90.

FIXTURE DISTANCE TO WALL 24” 30” FIXTURE CENTERS (SPACING) 24” 30” 30” 36” 1’ 13.4 15.3 13.4 12.1 12.2 12.1 4.2 4.8 4.2 3.9 4.1 3.9 2’ 29.4 33.4 29.4 26.2 29.5 26.2 17.3 19.6 17.3 15.9 17.2 15.9 3’ 21.7 24.0 21.7 19.7 22.3 19.7 17.6 19.8 17.6 16.0 18.3 16..0 4’ 13.3 14.2 13.3 12.3 13.6 12.3 12.6 13.9 12.6 11.7 13.2 11.7 5’ 8.1 8.5 8.1 7.7 8.3 7.7 8.5 9.1 8.5 8.0 8.8 8.0 6’ 5.2 5.4 5.2 5.0 5.2 5.0 5.7 6.0 5.7 5.5 5.9 5.5 7’ 3.4 3.5 3.4 3.3 3.5 3.3 3.9 4.1 3.9 3.8 4.0 3.8 8’ 2.4 2.4 2.4 2.3 2.4 2.3 2.8 2.9 2.8 2.7 2.8 2.7 9’ 1.7 1.7 1.7 1.7 1.7 1.7 2.0 2.1 2.0 2.0 2.1 2.0

400-HI-40/1000/FS-4 TRIM + WW-4 WALL WASH ACCESSORY - FOOTCANDLES ON WALL

DIS

TAN

CEFR

OM

CEI

LIN

G

91262-12.4 PAGE 5

FIXTURE DISTANCE TO WALL 24” 30” FIXTURE CENTERS (SPACING) 24” 30” 30” 36” 1’ 10.1 10.1 10.1 9.7 7.3 9.7 3.0 2.1 3.0 2.9 1.6 2.9 2’ 27.1 30.4 27.1 24.3 26.1 24.3 15.5 16.9 15.5 14.2 14.5 14.2 3’ 21.1 23.5 21.1 19.0 21.7 19.0 16.7 18.7 16.7 15.2 17.1 15.2 4’ 13.2 14.2 13.2 12.2 13.5 12.2 12.4 13.7 12.4 11.4 12.9 11.4 5’ 8.1 8.5 8.1 7.6 8.3 7.6 8.4 9.1 8.4 7.9 8.7 7.9 6’ 5.2 5.4 5.2 4.9 5.2 4.9 5.7 6.0 5.7 5.4 5.9 5.4 7’ 3.4 3.5 3.4 3.3 3.5 3.3 3.9 4.1 3.9 3.8 4.0 3.8 8’ 2.4 2.4 2.4 2.3 2.4 2.3 2.8 2.9 2.8 2.7 2.8 2.7 9’ 1.7 1.7 1.7 1.7 1.7 1.7 2.0 2.1 2.0 2.0 2.1 2.0

400-HI-40/1000/FR-4 TRIM + WW-4 WALL WASH ACCESSORY - FOOTCANDLES ON WALL

DIS

TAN

CEFR

OM

CEI

LIN

G

Note: With HI, WD or WD-2 LED options, use 40° optic and 20° aiming angle for optimal performance. With HI-2 LED option, use 10° optic + FL lens and 20° aiming angle for optimal performance.