Product Description

Autodesk Inventor 2016Advanced Assembly and Machine DesignIn this Guide

Derived Designs

Tolerancing and Monitoring Design Values Deriving Geometry Creating Frames Modifying Frames

Adaptive Design

Introduction to Adaptive Design Adaptive Cross-Part Sketch Geometry Adaptive Parts and Features Adaptive and Flexible Subassemblies

Content Center

Overview of the Content Center Using the Content Center Publishing and Managing Content

Sheet Metal and Frame Generator Introduction to Sheet Metal Faces Flanges

Contour Flanges Hems Start with an assembly composed of two different skeletal design parts. Delete, modify, and create end treatments and modify frame members. Publish custom profiles from sketches and iParts for use in the Frame

Generator.

Routed Systems

Tube and pipe Understanding Routes, Runs, and assembly Structure Exploring the Tube and pipe styles Placing a Harness

Cable and harness

Creating and placing Electrical parts Creating a harness Placing Wires

Note: The suggested course duration is a guideline. Course topics and duration may be modified by the instructor based upon the knowledge and skill level of the course participants.

Autodesk and Autodesk Inventor are trademarks or registered trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2006 Autodesk, Inc. All rights reserved.

Autodesk and Autodesk Inventor are trademarks or registered trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2008 Autodesk, Inc. All rights reserved.

Autodesk and AutoCAD Civil 3D are trademarks or registered trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2008 Autodesk, Inc. All rights reserved.