Bpt video entry in crestron systems - WordPress.com · 2013-02-05 · > sipsrvpass Text console –CrestronToolbox *Textconsole –CrestronToolboxisjust one

Bpt video entry in crestron Bpt video entry in crestron

systemssystems

Devices neededDevices needed

DVC/08(DC/08)DDVC/08 VR(DDC/08 VR)Entry panels

VA/08(if more than one entry panel)

VAS/100.30 (VAS/101)(if ONE entry panel or extra power is needed)

Crestron® terminalTPMC-9L

ETI/XIPLAN gateway

ETI/SER XIPSystem server

LAN SWITCH(generic one)

PCS/XIPFor programming

GST LICENSELIC/GSTxxx

Crestron® terminalTPMC-4SM-FD

TO TRADITIONAL RECEIVERS

Ethernet cable

Ethernet cable

Ethernet cable VCM/1D

VCM/4D

VCM/4DETI/XIP

VA/08

ETI/SER XIP

XIP ENTRY PANELS

PC with PCS/XIP swto program the

system

LIC/GSTxxxUploaded into

the server

TPMC-9L

TPMC- 4SM - FD

Ethernet cable

Ethernet cable

SWITCH

GST LICENSESGST LICENSES

100 licenses for generic SIP terminalsLIC/GST10062880040



1 single license for a generic SIP terminalLIC/GST00162880010

1. Order the license

Interface for LAN connectionETI/XIP62740030

LAN server for BPT systemsETI/SER XIP62740040

1.1 Be sure to have already installed ETI/SER and ETI/XIP

Activation procedureActivation procedure

2. Activate the license

The customer must have in his hands the LICENSE AGREEMENT and the ETI/SER XIP.

ETI/SER XIP

LICENCE AGREEMENT


2. Activate the license.2.1 Have access to the SERVER using the browser

By default address (192.168.1.1, user: installer, psw: 112233); or by the new IP address, given by the installer.


Once entered in the setup window, select in the folder “Management” on the left the menu “Software and config”.

On the bottom there is the section “License request”. Write a short

description in the “Description”field and then click on the button

“Request”.


The SERVER automatically generate a license request file.

The customer has to send an email to BPT asking the

license activation. It’s necessary to attach the

generated license request file and the code

number of the license agreement (LIC/GSTXXX).

NOTE: to avoid all possible problems with windows firewalls or antivirus maybe it will be better to ZIP the file before send it to us.

2. Activate the license.2.2 Send the activation request to BPT


The BPT employee once receive all the necessary data, will active the license generating a new file, that will be send back to the customer.

NOTE: to avoid all possible problems with windows firewalls or antivirus maybe you will receive the file .ZIP. It’s necessary to UNZIP it before the upload.

Once the email arrives, the customer has to UPLOAD the

received file in the server. Enter into the server settings, select

inside the folder “Management”the menu Software and config,

and then press “Upload”.

2. Activate the license.2.3 Upload the activated license


In the table at the top of the page the line with the uploaded GST licences will appear.

50

Total amount of licence uploaded(1 or 10 or 50 or 100)


Programming procedureProgramming procedure

Pcs/xipPcs/xip

TO TRADITIONAL

RECEIVERS

ETI/XIP

VA/08

ETI/SER XIP

XIP ENTRY PANELS

1. Open the 1. Open the swsw PCS/XIP and create the structurePCS/XIP and create the structure

TPMC-9L

TPMC- 4SM - FD

Ethernet cable

Ethernet cable

Create the structure as usual. Add the IP Block with inside the Generic SIP device (that represents the smartphone or tablet…)

2. Download the programming file in the system2. Download the programming file in the system

Once the programming has been done, the system automatically assign to each Generic SIP an ACCOUNT USERNAME, that must be used to activate the user in the mobile device.

In the ETI/SER XIP web page inside the menu Xip PABX -> Accounts -> Generic IP Receivers there is the list with the users created with the PCS/XIP.

3. User activation3. User activation

As final step it’s necessary to ENABLE each user with the uploaded licence. Select the user and in the bottom flag ENABLE option. Then click on SAVE. The user now is enable to be seen in the XIP/LAN system.

Code automatically generated by the PCS/XIP

Crestron terminal set upCrestron terminal set up

with Crestron Toolboxwith Crestron Toolbox

Text console Text console –– CrestronCrestron ToolboxToolbox

From Tools menu choose Text Console

*Text console – Crestron Toolbox is just one of the different ways to set up Crestron Terminals. The parameters to set are the same as in this example for all the different Crestron tools.

Click the PENCIL button, choose TCP and write the IP address of the terminal which is going to be set up


*Text console – Crestron Toolbox is just one of the different ways to set up Crestron Terminals. The parameters to set are the sameas in this example for all the different Crestron tools.

Once connected to the terminal write on the console the following commands:> sipinfoThis is needed to see the SIP configuration. Look the correct exemple in this picture.There are some lines that must be setted with right values.



It’s necessary to set:

>sipmode SERVER>sipautom DS>sipsrvipaddress <write_the_IP_address_of_the_server>



It’s necessary to set:

>sipremoteconfighttp://<ip_address_of_bpt_server>/XIP-server/xipPlant/bptXipPlant.xml>siplocalext 007xxxxxxxx (user account name, that could be found in the server web page)



> siplocalport 5060> sipsrvrealm asterisk> sipserverport 5060



> sipsrvuser 007xxxxxxxx

> sipsrvpass <userpassword>


*Text console – Crestron Toolbox is just one of the different ways to set up CrestronTerminals. The parameters to set are the same as in this example for all the differentCrestron tools.

At the end could be necessary to tape the command

> reboot



Thanks for your attentionErika Ostan

BPT Technical Assistance

Documents

Bpt video entry in crestron systems - WordPress.com · 2013-02-05 · > sipsrvpass Text console –CrestronToolbox *Textconsole –CrestronToolboxisjust one