Building a Yagi Uda Antenna. Bryan Hees & Mike Zimmer. FACTS. This Yagi has a 12 dB It is considered a shotgun Yagi A shot from can to can be carried to about ten miles Total time spent building antenna was about three hours. Parts. - PowerPoint PPT Presentation
Building a Yagi Uda Antenna
Building a Yagi Uda AntennaBryan Hees & Mike ZimmerFACTSThis
Yagi has a 12 dBIt is considered a shotgun YagiA shot from can to
can be carried to about ten milesTotal time spent building antenna
was about three hours
Parts
THATS RIGHT, THATS AN OLD ALUMINUM ARROW WE USED FOR THE
TUBES!Fixing the Connector
Cutting the Connector Port
Cut Tubes
Improvising a Spacer
Finished Collector
Finished Element
Putting it all together
Making a cable out of speaker wire
Finished product
Time to test it
Did I mention it is directional!
UM, Maybe it needs to be tweaked a little Look they are
multiplying!
Two finished products
Ta Da!!!! UM, YOU ARE SUPPOSED TO APPLAUD NOW!
Special thanks to Rob Flickenger and the guys at WIRELESS
DEVCENTER
![Multi-objective Gain-Impedance Optimization of Yagi-Uda ... · better optimization technique for Yagi-Uda antenna designs, in [30]. In this paper, use of BBO, Blended BBO and NSPSO](https://img.pdfslide.net/doc/110x75/60b31a32028c620c9e76b00e/multi-objective-gain-impedance-optimization-of-yagi-uda-better-optimization.jpg)
![Currents on Generalized Yagi StructuresAs recounted by Professor Uda 11,2], the Yagi-Uda antenna was invented in 1926. Further practical and theoretical studies were undertaken, but,](https://img.pdfslide.net/doc/110x75/5e94290536a67159ca4acd82/currents-on-generalized-yagi-structures-as-recounted-by-professor-uda-112-the.jpg)
