camera FMC-IP1 DeLaval farm monitoring - …ludamanuals.com/downloads/FMC_IP1_Instruction_Manual_ENG.pdf · EC Declaration of Conformity - DeLaval farm monitoring camera FMC-IP1

DeLaval farm monitoringcamera FMC-IP1Instruction Book

© DeLaval 2016. 876215012016-03-15, Version 2 Original instruction

EC Declaration of Conformity - DeLaval farm monitoring camera FMC-IP1.................................. 5Safety precautions.............................................................................................................................. 7

n DeLaval farm monitoring camera FMC-IP1

1 Foreword........................................................................................................................... 72 Disclaimer......................................................................................................................... 73 Note to operator................................................................................................................ 74 Safety regulations............................................................................................................. 75 Warranty............................................................................................................................ 8

General description............................................................................................................................. 9n DeLaval farm monitoring camera FMC-IP1

1 Introduction....................................................................................................................... 91.1 Parts of the camera......................................................................................... 10

2 Technical data................................................................................................................. 113 Function of the FMC-IP1................................................................................................. 124 WPS button..................................................................................................................... 135 Memory card................................................................................................................... 146 Software.......................................................................................................................... 14

6.1 Software functions.......................................................................................... 146.2 PC software functions..................................................................................... 156.3 Application functions....................................................................................... 15

Installation.......................................................................................................................................... 16n DeLaval farm monitoring camera FMC-IP1

1 Installing the software..................................................................................................... 162 Connecting the camera to a network.............................................................................. 163 Adding a camera to the PC software.............................................................................. 184 Adding a camera to the iOS application.......................................................................... 205 Adding a camera to the Android application................................................................... 216 Inserting a memory card................................................................................................. 22

Operation............................................................................................................................................ 23n DeLaval farm monitoring camera FMC-IP1

1 Using the PC software.................................................................................................... 231.1 Viewing a video feed....................................................................................... 231.2 Viewing multiple video feeds........................................................................... 251.3 Taking a photograph....................................................................................... 261.4 Viewing a photograph..................................................................................... 271.5 Recording a video........................................................................................... 301.6 Viewing a recorded video................................................................................ 301.7 Camera software............................................................................................. 33

2 Using the iOS application................................................................................................ 382.1 Viewing a video feed....................................................................................... 382.2 Taking a photograph....................................................................................... 382.3 Viewing a photograph..................................................................................... 39

DeLaval farm monitoring camera FMC-IP1Table of contents

© DeLaval 2016.2016-03-15, Version 2 3 (50) 87621501

2.4 Viewing an event............................................................................................. 392.5 Playing a video................................................................................................ 392.6 Camera settings.............................................................................................. 39

3 Using the Android application......................................................................................... 423.1 Viewing a video feed....................................................................................... 423.2 Taking a photograph....................................................................................... 423.3 Viewing a photograph..................................................................................... 433.4 Camera settings.............................................................................................. 43

Troubleshooting................................................................................................................................ 46n DeLaval farm monitoring camera FMC-IP1

1 Troubleshooting table...................................................................................................... 46

DeLaval farm monitoring camera FMC-IP1Table of contents

© DeLaval 2016.2016-03-15, Version 2 4 (50) 87621501

EC Declaration of Conformity

Name of product: DeLaval farm monitoring camera FMC-IP1Type: 87472701

Report No. 80010110 version 0

The product complies with requirements of the following directives:

Radio and Telecommunication Terminal Equipment Directive - 1999/5/EC

Harmonised standards which have been used:

ETSI EN 301 489-1 V1.9.2

ETSI EN 301 489-17 V2.1.1

ETSI EN 300 328 V1.7.1

EN 62311:2008

EN 60950-1:2006/A11:2009+A1:2010+A12:2011

Tumba 2014-02-17 Signed:

Name: Tim Nicolaï

Position: Executive Vice President

Department: BA Aftermarket, Services & BarnEnvironment

Contact: Product Manager Farm SupplyP.O. Box 39SE 147 21 TUMBASweden

Name and address of manufacturer:

DeLaval International ABP.O. Box 39SE 147 21 TUMBASweden

© DeLaval 2016.2016-03-15, Version 2 5 (50) 87621501

© DeLaval 2016.2016-03-15, Version 2 6 (50) 87621501

Safety precautionsDeLaval farm monitoring cameraFMC-IP1

1 ForewordThe safety and operational instructions must beobserved by any person involved with the use oroperation of this equipment. Under no circum-stances must the equipment be used if it is dam-aged or if the operation of the equipment is notcompletely understood.

2 DisclaimerThe information, instructions and parts listed areapplicable and current on the date when issued.DeLaval reserves the right to make changes with-out notice.

3 Note to operatorIt is the operator's responsibility to see that anyperson involved with the use or operation of thisequipment follows all safety and operationalinstructions. Under no circumstances should thisequipment be used if the equipment is faulty orthe operator does not completely understand theoperation of the equipment.

4 Safety regulations

Danger!Do not leave plastic packagingmaterial near children to avoid therisk of suffocation.

DeLaval farm monitoring camera FMC-IP1Safety precautions

© DeLaval 2016.2016-03-15, Version 2 7 (50) 87621501

Caution!Do not cover the power adaptors orplace them on heat sensitive mate-rials.

Caution!Do not lift the equipment by theantennas.

Note! Do not use the equipment to superviseother people without their permission. Followlocal regulations in connection with supervision.

5 WarrantyNote! DeLaval will not take any responsibility fordamage resulting from faulty installation, opera-tion or for improper or inadequate care and main-tenance.

DeLaval farm monitoring camera FMC-IP1Safety precautions

© DeLaval 2016.2016-03-15, Version 2 8 (50) 87621501

General descriptionDeLaval farm monitoring cameraFMC-IP1

1 IntroductionDeLaval farm monitoring camera FMC-IP1 is aHD supervision camera system for barns, stablesor outdoor areas especially made for tough barnenvironment. The camera software provides areal time view, several areas can be monitored atthe same time.

The FMC-IP1 includes:

n Wireless IP cameran 12 V outdoor power adaptorn Power adaptor cablen 5 dBi omnidirectional antennan Y-cable for router and camera connectionn 10 metres extension cablen 1 metre Ethernet cablen Screwsn Plugsn Quick guide

DeLaval farm monitoring camera FMC-IP1General description

© DeLaval 2016.2016-03-15, Version 2 9 (50) 87621501

1.1 Parts of the cameraNote! The camera can be reset by pushing thebutton at the back of the camera for 10 seconds.This will also reset the password.

A

B

D

E

F G

H

J

C

2436

01

Fig. 1: Parts of the camera.

A: Camera footB: Infrared LEDC: Reset button/WPSD: Day/night sensorE: LensF: Protective hoodG: AntennaH: MicrophoneJ: Power connection; polarity: positive - centre,

negative - sleeve


© DeLaval 2016.2016-03-15, Version 2 10 (50) 87621501

2 Technical data

DeLaval farm monitoring camera FMC-IP1

Maximum resolution 1280 x 720pixel

Maximum frame rate 30 fps

Type of equipment 2.4 GHz wire-less transmit-

ter

Maximum radiated power 20 dBm

Viewing angle 90°

Transmitting frequency 2.412-2.462GHz

Image sensor 6.35 mm (1/4")CMOS

Minimum illumination 1.0 Lux (0 Luxin night vision

mode)

Infrared night range 12 m

Power supply DC 12 V

Operating temperature -20 to +60°C(-4 to + 140°F)

Storage temperature -20 to +60°C(-4 t o + 140°F)

IP-classification camera IP66

IP-classification adapter IP44

Wireless technology IEEE802.11b/g/n

Security WEP (64/128bit), WPA-

PSK (AES/TKIP), WPA2-PSK (AES/

TKIP)

SD card support 16 Mb-128 Gb(SDXX

microSD)

Weight 334 g

Dimensions Ø 51 x 105mm

Simultaneous viewers 16

Power consumption (infraredoff - 200 mA)

2.4 W


© DeLaval 2016.2016-03-15, Version 2 11 (50) 87621501

Power consumption (infraredon - 400 mA)

4.8 W

3 Function of the FMC-IP1The camera transmits signals wirelessly throughWi-Fi. The video feed from the camera can beviewed using the associated software. The num-ber of cameras that can be used at the same timedepends on the bandwidth of the internet con-nection.

Note! Maximum number of cameras is 100 in thesoftware.

The camera needs to be placed within Wi-Firange, see Fig. 2; all obstacles between the cam-eras and the router will affect the quality of thevideo feed.


© DeLaval 2016.2016-03-15, Version 2 12 (50) 87621501

A

B

C J

D F G H

E

2437

43

Fig. 2: FMC-IP1 system overview.

A: Wi-Fi rangeB: Calving boxC: Smart deviceD: Milking equipmentE: Router

F: Barn overviewG: Outdoor areaH: GarageJ: Computer

4 WPS buttonThe camera (FMC-IP1) is equipped with a WPS(Wi-Fi protected setup) button. If the router alsohas WPS function a safe and easy connectionbetween the camera and router can be estab-lished. Follow the manual for the router for theWPS setup.


© DeLaval 2016.2016-03-15, Version 2 13 (50) 87621501

5 Memory cardThe camera can be equipped with a memorycard. The memory card is necessary for using themotion detection recordings in the iOS andAndroid application.

1 GB equals approximately 68 minutes of recor-ded material.

Some memory cards may need formatting beforeoperation.

6 SoftwareThe video feed can be viewed via PC software,Android or iOS applications.

The FMC-IP1 software is available for PC or asmart device and can be downloaded for freefrom the following locations:

n www.delavalfmc.com/FMC-IP1 - PCn Google Play - Androidn Apple Store - iOS

System requirements for PCOperating system Windows 2000 or later versionProcessor Intel Pentium III, 1 GHz or higherMemory 256 MB RAM or higherWeb browser Internet Explorer 5.5 or later; Mozilla Firefox; Goo-

gle Chrome

Note! The DeLaval FMC application is not sup-ported by Macintosh computers.

6.1 Software functionsThe software can be used to take photographsand record videos from the video feed of thecamera. The motion detection function notifiesthe user on unexpected movements in the moni-tored area. The software can be set to send apush notification or to send an e-mail notificationevery time the motion detection alarm goes off.The e-mail notification function requires a receiv-ing e-mail account and a sending e-mail account.


© DeLaval 2016.2016-03-15, Version 2 14 (50) 87621501

The sending and receiving accounts can not bethe same, a Gmail account is recommended forthe sending e-mail account.

6.2 PC software functionsn Real time video feedn Multiple real time video feedn Taking photographsn Viewing photographsn Recording videosn Viewing videosn Scheduled recordingn Motion detection

6.3 Application functionsn Real time video feedn Taking photographsn Viewing photographsn Motion detection


© DeLaval 2016.2016-03-15, Version 2 15 (50) 87621501

InstallationDeLaval farm monitoring cameraFMC-IP1

1 Installing the software1. Turn on the PC or smart device.

2. Download the software FMC-IP1

n from www.delavalfmc.com/FMC-IP1for PC

n from AppStore for iOSn from Google Play for Android.

3. Follow the instructions on the screen toinstall the software.

4. Add the camera to the software.

PC Ä Chapter 3 "Adding a camera to thePC software" on page 18

iOS Ä Chapter 4 "Adding a camera to theiOS application" on page 20

Android Ä Chapter 5 "Adding a camera tothe Android application" on page 21.

2 Connecting the camera to a net-workNote! Make sure that the camera is locatedwithin the Wi-Fi range and the signal is strongenough.

Note! Make sure that the router is connected tothe Internet.

The camera is pre-configured to automaticallyconnect to a DeLaval router. If a DeLaval routeris available follow steps 8-10.

DeLaval farm monitoring camera FMC-IP1Installation

© DeLaval 2016.2016-03-15, Version 2 16 (50) 87621501

1. Change the power adaptor cable to the "Y"cable, see Fig. 3.

2. Connect the network cable to the "Y" cableand to the router.

3. Plug the power adaptor connected to thecamera into the power socket, see Fig. 4.

4. Open the camera settings and connect thecamera to the Wi-Fi network.

n For PC see Ä Chapter 1.7.3 "Settingthe camera properties" on page 37.

n For iOS see Ä Chapter 2.6.2 "Chang-ing the camera network" on page 40.

n For Android see Ä Chapter 3.4 "Cam-era settings" on page 43.

5. Disconnect the network cable from thecamera.

6. Detach the "Y" cable from the camera.

7. Plug in the power adaptor cable to the cam-era.

8. Fasten the antenna on to the camera.

9. Fasten the camera in a suitable positionwith the included screws in the camera foot.

10.Plug in the power adaptor to the powersocket, see Fig. 5.

2435

08

Fig. 3: Changing the power adapter cable.

2435

11

Fig. 4: Connecting the network cable.

2435

01

Fig. 5: Camera with antenna and power cable.


© DeLaval 2016.2016-03-15, Version 2 17 (50) 87621501

3 Adding a camera to the PC soft-ware

1. Open the PC software, see Fig. 6.

2. Click the "Camera" icon in the menu bar,see A in Fig. 6.

ð The "Camera" icon becomes red.

3. Click the "Add camera" icon in the field ofinstalled cameras (B).

B

A

2441

60

Fig. 6: PC software screen.

4. Enter the camera "UID" code, see A in Fig. 7.


© DeLaval 2016.2016-03-15, Version 2 18 (50) 87621501

Note! The "UID" code can be found on thequick guide or on the camera.

5. Enter "admin" as default password, see Bin Fig. 7.

Note! It is recommended to change thecamera password to prevent unauthorizedaccess. To change the camera passwordfollow steps 7-10 in Ä Chapter 1.7.3 "Set-ting the camera properties" on page 37.

6. Enter a suitable name for the camera, seeC in Fig. 7.

7. Click the green "Check" icon to confirm.

Note! For adding more cameras repeat theabove procedure.

UID

Password

Camera nameCB

A

2434

31

Fig. 7: "UID" code screen.


© DeLaval 2016.2016-03-15, Version 2 19 (50) 87621501

4 Adding a camera to the iOSapplication

1. Tap the "Add Camera" icon, see G in Fig. 8.

2. Enter a suitable name for the camera.

3. Enter the camera "UID" code.

Note! The "UID" code can be found on thequick guide or on the camera.

4. Enter "admin" as default password.

Note! It is recommended to change thecamera password to prevent unauthorizedaccess. To change the camera passwordsee Ä Chapter 2.6.1 "Changing the cam-era password" on page 39.

5. Tap "Save" to confirm.

HGFED

A

C

B

2454

44

Fig. 8: iOS application screen.

A: Camera listB: Delete cameraC: Installed camerasD: Camera listE: EventF: PlayH: Information


© DeLaval 2016.2016-03-15, Version 2 20 (50) 87621501

5 Adding a camera to the Androidapplication

1. Tap the "Add camera" icon, see D in Fig. 9.

2. Enter the "UID" code.

Note! The "UID" code can be found on thequick guide and on the camera.

3. Enter "admin" as default password.

Note! It is recommended to change thecamera password to prevent unauthorizedaccess. To change the camera passwordsee Ä Chapter 3.4.1 "Changing the cam-era password" on page 43.

4. Enter a suitable name for the camera.

5. Tap "OK" to confirm.

D

BC

A

2436

68

Fig. 9: Android application screen.

A: Exit menuB: Installed cameraC: Camera settings


© DeLaval 2016.2016-03-15, Version 2 21 (50) 87621501

6 Inserting a memory card1. Slide off the protecting hood.

2. Unscrew the front part of the camera.

3. Separate the front part from the camera.

4. Insert the memory card into the memorycard holder.

Note! Make sure to insert the card the cor-rect way, otherwise it can stuck into thecamera.

5. Reassemble the camera.


© DeLaval 2016.2016-03-15, Version 2 22 (50) 87621501

OperationDeLaval farm monitoring cameraFMC-IP1

1 Using the PC software1.1 Viewing a video feed



2. Double-click the chosen camera channel.

Note! Make sure that the camera is online.

3. View the video feed.

DeLaval farm monitoring camera FMC-IP1Operation

© DeLaval 2016.2016-03-15, Version 2 23 (50) 87621501

B

A

KJHGFEDC

2441

58

Fig. 10: Viewing the video feed screen.

A: Menu barB: Video streamC: Screen captureD: Record videoE: Zoom in

F: Zoom outG: Maximise windowH: Volume on/offJ: Change volumeK: Return to main menu


© DeLaval 2016.2016-03-15, Version 2 24 (50) 87621501

1.2 Viewing multiple video feeds

1. Click the "Multiple view" icon in the menubar, see A in Fig. 11.

ð The "Multiple view" icon becomes red.

2. Click the "Multiple view" icon (C).

A

B

EDC

Waiting Area Overview

2436

92

Fig. 11: Multiple video feed screen.

A: Menu barB: Video streamsC: Multiple view

D: Volume on/offE: Change volume

3. Click the selected camera channels.

ð The selected camera channelsbecome green.


© DeLaval 2016.2016-03-15, Version 2 25 (50) 87621501


1.3 Taking a photograph



2. Double-click the selected camera channel.


3. Click the "Screen capture" icon, see C in Fig. 10.


© DeLaval 2016.2016-03-15, Version 2 26 (50) 87621501

1.4 Viewing a photograph

1. Click the "Photo" icon in the menu bar, seeA in Fig. 12.

ð The "Photo" icon becomes red.

2. Click the selected camera (B).

3. Double-click the selected photograph.


© DeLaval 2016.2016-03-15, Version 2 27 (50) 87621501

ð The selected photograph expands, seeFig. 13.

C

B

A

2436

94

Fig. 12: Photograph viewing screen.

A: Menu barB: Installed camerasC: Photographs


© DeLaval 2016.2016-03-15, Version 2 28 (50) 87621501

GFEDCBA

2434

44

Fig. 13: Camera picture.

A: Previous photographB: Next photographC: Zoom inD: Zoom out

E: DeleteF: Full screenG: Back to photograph view


© DeLaval 2016.2016-03-15, Version 2 29 (50) 87621501

1.5 Recording a video



2. Double-click the selected camera channel.


ð The selected camera screen becomesgreen.

3. Click the "Record video" icon to startrecording, see D in Fig. 10.

Note! It is not possible to save recordingsoutside the hard drive.

ð The "Record video" icon changes to a"Stop" icon.

4. Click the "Stop" icon to finish recording.

1.6 Viewing a recorded video

1. Click the "Play" icon in the menu bar, seeA in Fig. 14.

ð The "Play" icon becomes red.

2. Select a camera from the installed cameralist (B).

ð The selected camera becomes red.

3. Double-click the selected video.


© DeLaval 2016.2016-03-15, Version 2 30 (50) 87621501

C

B

A

2436

93

Fig. 14: Recorded video screen.

A: Menu barB: Installed camerasC: Recordings


© DeLaval 2016.2016-03-15, Version 2 31 (50) 87621501

JHGFEDCBA

2434

41

Fig. 15: Camera picture.

A: Previous videoB: Play videoC: Next videoD: Zoom inE: Zoom out

F: DeleteG: Full screenH: Scrub through videoJ: Back to video view


© DeLaval 2016.2016-03-15, Version 2 32 (50) 87621501

1.7 Camera software1.7.1 Setting the video properties

1. Click the "Settings" icon in the menu bar,see A in Fig. 10.

ð The "Settings" icon becomes red.

2. Click the selected camera.

3. Expand "Video Settings".

4. Adjust "Video Quality" with the slider.

5. Select the most suitable orientation in"Video Flip".

6. Click the folder in "Live view destination" toselect the suitable place for recordings.


2434

45DeLaval farm monitoring camera FMC-IP1Operation

© DeLaval 2016.2016-03-15, Version 2 33 (50) 87621501

1.7.2 Setting the recording properties




3. Click the "Multiple view" icon in the menubar.

ð The "Multiple view" icon becomes red.

4. Click the chosen camera and expandoptions by right-clicking the camera pic-ture.

ð "Scheduled recording setting" and"Configure save path" options appear.

5. Click "Configure save path" and selectwhere the files should be stored.

6. Right-click the camera picture again,choose "Scheduled recording setting" andadd up to eight schedules. For each ofthem:

6.1 Check the "Enable" box.

6.2 Enter the recording start and stop time.

6.3 Select the start date.

6.4 Click the boxes for the preferred daysif recurrence wanted.

6.5 Click the green checkmark next to"Saving recording settings?" at thebottom.

Note! The video stream is running onlywhen the "Multiple view" menu isactive. The program itself can be mini-mized und run in the background, butthe recording will stop after leaving the"Multiple view" menu.

Note! Special characters (such as å,ä, ö, #, %, &) can not be used in a filepath.

Note! It is possible to record from mul-tiple cameras at the same time. Thisalso depends on the local network inorder to get the data from cameras toPC.

2434

45

Setting a scheduled recording in the "Multipleview" menu


© DeLaval 2016.2016-03-15, Version 2 34 (50) 87621501

Note! The recording takes one file perrecording slot. Be aware that files canbe very big after many hours of record-ing.

Note! It is not possible to record overmidnight. If needed, add two recordingsessions - first until midnight, and thesecond one from midnight.

7. Note! Recording function from the"Settings" menu enables to record fromonly one camera, only on the SD card.

Expand "Scheduled Recording".

8. Click the "Plus" icon.

9. Enter the recording start and stop time.

10.Select the start date.

11.Click the boxes for the preferred days ifrecurrence wanted.

12.Click the "Check" icon.

ð The scheduled recording will be added.

13.Click the "Check" icon to confirm.

14.Click the "On/off" icon to activate thescheduled recording.

15.Expand "Notification Settings".

16.Adjust motion sensitivity with the sliderunder "Sensitivity".

17.Click the "On/off" icon to activate or deac-tivate motion recording.

18.Click the "Settings" (cogwheel) icon in"Sending e-mail address setting" to setsending e-mail address.

The PC software can create an e-mail witha snapshot when motion detection is acti-vated and alarming. To be able to use thisfunction, the sending and the receiving e-mail can not be the same.

Note! Gmail address is recommended asthe sending e-mail address.

Recommended settings:

n SMTP Server: smtp.gmail.comn SMTP Port: 465

Setting a scheduled recording in the"Settings" menu

Setting motion recording

Setting the sending e-mail account


© DeLaval 2016.2016-03-15, Version 2 35 (50) 87621501

n Username: [email protected] Password: *******n SSL checkbox checkedn POP needs to be enabled in Gmail

19.Click the "Check" icon to confirm.

20.Click the "Plus" icon to add an e-mailaddress.

21.Enter the receiving e-mail address.

22.Click the "Check" icon to add the e-mailaddress.

23.Click the "On/off" icon to activate or deac-tivate e-mail notification.

Setting e-mail notification


© DeLaval 2016.2016-03-15, Version 2 36 (50) 87621501

1.7.3 Setting the camera properties




3. Expand "Camera Settings", see A in Fig. 16.

4. Click the selected network (B).

5. Enter the network password (C).

Note! The program will not give an errormessage if a wrong network password isentered.

6. Click the "Check" icon (D).

7. Enter the current password (F).

8. Enter the new password (G).

Note! Only standard letters and numberscan be used in the password.

9. Enter the new password again (H).

10.Click the green "Check" icon to confirm (J).

11.Download the latest firmware fromhttp://www.delavalfmc.com/FMC-IP1.

12.Click the "Settings" icon in the top menubar, see A in Fig. 10.

13.Select the camera.

14.Click the "Folder" icon (N) in "Firmwareupdate" (K).

15.Click the downloaded file.

16.Click the green "Check" icon to confirm (L).

2434

45

Changing the network

M

NKHGFE

B

A

J

L

DC

2434

48

Fig. 16: "Camera Settings".

E: Change passwordK: Firmware update

Changing the camera password

Updating the firmware


© DeLaval 2016.2016-03-15, Version 2 37 (50) 87621501

http://www.delavalfmc.com/FMC-IP1

Note! The camera can be reset with the "ResetCamera" option (M) or by pushing the button atthe back of the camera for 10 seconds.

2 Using the iOS application2.1 Viewing a video feed

1. Tap the "Camera" icon, see D in Fig. 17.

ð The list of installed cameras appear.

2. Tap the camera name of the selected cam-era in the list of installed cameras.

2.2 Taking a photograph1. Tap the "Camera" icon, see D in Fig. 17.

ð The list of installed cameras appears.

2. Tap the camera name of the selected cam-era in the list of installed cameras.

3. Tap the camera icon in the bottom of thescreen.

ð Snapshot is taken and saved on thesmart device.

HGFED

A

C

B

2454

44

Fig. 17: "Camera List" on iOS.

A: Camera ListB: Delete cameraG: Add cameraH: Information


© DeLaval 2016.2016-03-15, Version 2 38 (50) 87621501

2.3 Viewing a photograph1. Tap the "Camera" icon, see D in Fig. 17.

ð The list of installed cameras appears.

2. Tap the selected camera.

3. Tap the "Image" icon in the bottom of thescreen.

4. View the selected photograph.

2.4 Viewing an event1. Tap the "Event" icon, see E in Fig. 17.

2. Tap the "Arrow" icon on the selected cam-era.

ð A list with motion detection alarmsappears.

2.5 Playing a video1. Tap the "Playback" icon, see F in Fig. 17.

2. Tap the selected camera.

ð A list with all available videos appears.

3. Tap the selected recording.

Note! Videos are recorded and saved on thememory card of the camera when motion detec-tion alarm is set to on.

2.6 Camera settings2.6.1 Changing the camera password

1. Tap the "Information" icon for the selectedcamera in the list of installed cameras, seeC in Fig. 17.

2. Tap "Security code".

3. Enter the current password.

4. Enter a new password.

5. Enter the new password again.



© DeLaval 2016.2016-03-15, Version 2 39 (50) 87621501

2.6.2 Changing the camera network


2. Tap "Advanced settings".

3. Tap "Network setup".

4. Tap "Wi-Fi networks".

ð Available Wi-Fi networks appear.

5. Tap the selected network.

6. Enter the network password.



© DeLaval 2016.2016-03-15, Version 2 40 (50) 87621501

2.6.3 Turning on motion detection


2. Tap "Advanced settings".

3. Turn on motion detection by tapping the"On/off" icon

Note! Push notification must be turned onin the settings of the device.

ð A push notification is sent when themotion detection alarm goes off.

4. Turn on alarm recording by tapping thealarm recording "On/off" icon.

ð Recording will start when the motiondetection alarm goes off.

5. Tap "Alarm actions".

6. Tap "Alarm e-mail".

7. Enter the sending e-mail account address.

8. Enter the sending e-mail account pass-word.

Note! The sending and the receiving emailaccounts cannot be the same.

Gmail address is recommended as thesending e-mail address.


n SMTP Server: smtp.gmail.comn SMTP Port: 465n Username: [email protected] Password: *******n SSL checkbox checkedn POP needs to be enabled in Gmail

9. Enter the receiving e-mail address.

Setting the motion detection e-mail account


© DeLaval 2016.2016-03-15, Version 2 41 (50) 87621501

3 Using the Android application3.1 Viewing a video feed

B CA

2436

70

Fig. 18: Video feed on Android.

A: ImagesC: Sound

n Tap the selected camera from the cameralist.

3.2 Taking a photograph1. Tap the selected camera from the camera

list.

2. Tap the camera icon, see B in Fig. 18.

ð Snapshot is taken and saved on thesmart device.


© DeLaval 2016.2016-03-15, Version 2 42 (50) 87621501

3.3 Viewing a photograph1. Tap the selected camera from the camera

list.

2. Tap the "Image" icon, see A in Fig. 18.

3. View the selected photograph.

3.4 Camera settings3.4.1 Changing the camera password

1. Tap "Camera settings" for the selectedcamera, see C in Fig. 9.

2. Tap "Modify camera", see B in Fig. 19.

3. Tap "Modify security code".

4. Enter the current password.

5. Enter a new password.

6. Enter the new password again.


F

E

D

C

B

A

2436

72

Fig. 19: Camera settings on Android.

A: ReconnectB: Modify cameraC: PlaybackD: EventF: SnapshotF: Delete camera


© DeLaval 2016.2016-03-15, Version 2 43 (50) 87621501

3.4.2 Changing the camera network



3. Tap "Advanced setting".

4. Tap "Network setup".

5. Tap "Wi-Fi setting".

ð Available Wi-Fi networks appear.

6. Tap the selected network.

7. Enter the network password.



© DeLaval 2016.2016-03-15, Version 2 44 (50) 87621501

3.4.3 Turning on motion detection



3. Tap "Advanced setting".

4. Turn on motion detection by tapping the"On/off" icon.

Note! Push notifications must be turned onin the device settings.

ð A push notification will be sent whenthe motion detection alarm goes off.


6. Tap "Alarm actions".

7. Tap "Alarm recording".

8. Turn on alarm recording by tapping thealarm recording "On/off" icon.

ð Recording will start when the motiondetection alarm goes off.


10.Tap "Alarm e-mail".

11.Turn on e-mail notification by tapping the"On/off" icon.

12.Enter the sending e-mail account address.

13.Enter the sending e-mail account pass-word.

Note! The sending and the receiving emailaccounts cannot be the same.

Gmail address is recommended as thesending e-mail address.


n SMTP Server: smtp.gmail.comn SMTP Port: 465n Username: [email protected] Password: *******n SSL checkbox checkedn POP needs to be enabled in Gmail

14.Enter the receiving e-mail address.

15.Tap "OK" to confirm.

Turning on alarm recording

Setting the motion detection e-mail account


© DeLaval 2016.2016-03-15, Version 2 45 (50) 87621501

TroubleshootingDeLaval farm monitoring cameraFMC-IP1

1 Troubleshooting tableNo. Symptom Cause Action1 The camera does not work

and the LED on the camerais not lit.

The camera has no power sup-ply.

n Check the power adaptercable.

n Check the power adapter.n Make sure that the power

socket works properly.

2 No image in the PC software. The camera is offline. n Place the camera withinWi-Fi range.

n Check that the antenna isattached properly.

n Reboot the camera.

The PC is offline. n Check the internet connec-tion of the PC.

The computer has malfunction. n Restart the computer.

The router is not working. n Reboot the router.

The fire wall is stopping theflow.

Make sure the fire wall is setcorrectly.

3 No image in the smart deviceapplication.

The camera is offline. n Place the camera withinWi-Fi range.

n Check that the antenna isattached properly.

n Reboot the camera.

The smart device is offline. n Check the internet connec-tion of the smart device.

The smart device does notwork.

n Restart the application.n Restart the device.

The router does not work. n Reboot the router.

4 Bad image quality. Bad reception. n Install better antenna.

» Continue next page

DeLaval farm monitoring camera FMC-IP1Troubleshooting

© DeLaval 2016.2016-03-15, Version 2 46 (50) 87621501

No. Symptom Cause Action

The camera is positioned toofar from the router.

n Move the camera closer tothe router.

n Add antenna extensioncable to move the antennacloser to the router.

There are obstacles betweenthe camera and the router.

n Add antenna extensioncable between the cameraand camera antenna.


© DeLaval 2016.2016-03-15, Version 2 47 (50) 87621501


© DeLaval 2016.2016-03-15, Version 2 48 (50) 87621501

is a registered trademark of Tetra Laval Holdings & Finance S. A. and DeLaval is a registered trade/servicemark of DeLaval Holding AB.

DeLaval International ABBox 39SE-147 21 TumbaSWEDEN

www.delaval.com

Documents

camera FMC-IP1 DeLaval farm monitoring - …ludamanuals.com/downloads/FMC_IP1_Instruction_Manual_ENG.pdf · EC Declaration of Conformity - DeLaval farm monitoring camera FMC-IP1